Related
]Hi, Guys, looking for update to Eui Marshmallow 5.8 19s, but unable to do so because of custom rom, root, unlocked bootloader & also don,t want all that hassle to go back to stock rom, recovery etc, just want regular twrp flash, then here we go,
Requirements:
1. Eui 5.8 19s Stock Rom
Link: http://bit.ly/2imQKDN
2. Twrp 3.0.2.0 ( Considering u unlocked bootloader, Rooted, Twrp Installed)
Link: http://bit.ly/2h8JQB6
3. updater-script
Link: http://bit.ly/2hxZ6bM
4. Minimal ADB & Fastboot ( For Flashing after rom installation / Already contain Twrp 3.0.2.0)
Link: http://bit.ly/2hfGUG9
5. Super SU Zip ( For Rooting)
Link: http://bit.ly/2i1CbZJ
Good practice: Always Backup ur Full Rom in Twrp
Preparing Zip:
1. Now Double click on Downloaded zip & open it, Do not extract
2. Go META-INF/com/google/android
3. Add downloaded Updater-script with winzip option at left top corner, it will replace ur existing script file.
4. Copy Zip file to internal storage
Thats it, ready for flash
Twrp Flashing:
1. boot into recovery using system update menu
2. Wipe everything except internal storage ( or u can also wipe that too)
i kept it because of all data, so it doesnt matter or also u can upgrade on existing rom without wiping anything,
no matter what it will work
3. flash zip, be patient, its big rom, it will take time
4. After Finish, wipe cache / dalvik, reboot, Twrp will show No os installed, ignore it & reboot
5. After reboot, may be or may be not u will find Orange Status, that ur bootloader is unlocked, device canot be trusted, Dont scare, it will reboot.
6. If booting takes lot of time then switch off device by keep pressing power button for 10sec
7. reboot again rom will start optimizing apps
& There u go ur in EUI 5.8 19S Marshmallow
-----------------------------------------------------------------------------------------------------------------------------------------------------
Recommendation: Better Do clean install with all wipes
-----------------------------------------------------------------------------------------------------------------------------------------------------
Thanks
For any queries, pls comment,
Happy to help u Always...
Can u guys help me.
I have a 1s x500 running 0026s, TWRP and Gapps. I have also now rooted by flashing supersu 2.82. Almost everthing is okay but some apps now won't work with a rooted phone.
I have tried to flash the 0026s rom again to clear gapps and root but the Twrp update says that the update is for X3 and not x3. I have checked the build prop file and the device is set to X3 so I don't know how to proceed to flash either the current rom or any future roms.
Can anyone help as I currently cannot unroot or do any further rom installs.
I think I need to edit the updater script file to remove the ro.product.device check? Anything else?? Any other fixes?
I don't want to clear the system in case I have a completely bricked phone.
thread not functioning
the thread you have given above is the official website of letv forum for india but recently it has been deactivated . and i want to flash my phone with this rom eui 5.8.19s
as the website is unable to reach please help me to out .
i have tried to download this rom from another link but it was not functioning and showed a bug and was unable to flash from twrp 3.1
please give me a link where i can find and download this rom which is functioning for letv leeco 1s (x507)
thank you
HERE IS A STEP BY STEP GUIDE TO ROOT ZENFONE 3 FOR PEOPLE WHO HAVE UNLOCKED THEIR BOOTLOADER AND ROOTED THEIR NOUGAT ROM PREVIOUSLY.
-first of you need to update your firmware to oreo.
-if you have unlocked your phone bootloader and/or rooted, you need to download and flash the latest nougat firmware through stock recovery which is 'WW-14.2020.1712.85' here https://www.asus.com/Phone/ZenFone-3-ZE552KL/HelpDesk_BIOS/
-after you finished flashing the latest nougat firmware, boot your phone as usual. and then download the official oreo firmware which is 'WW-15.0410.1712.31 here https://www.asus.com/Phone/ZenFone-3-ZE552KL/HelpDesk_BIOS/
-then put that 'WW-15.0410.1712.31' firmware to your SD card
-your phone will automatically detect an oreo firmware is available to be flashed that are located on your SD card then click on update
-then your phone will go to the updating/flashing process took around 5-10 minutes. after you're done your phone are now using the official stock firmware.
-then to proceed to root your oreo firmware, you need to flash a TWRP recovery. you can download twrp recovery here https://drive.google.com/drive/folders/1KYX8G6wgOa_X7uJfIar7ENuk2Q1nQyWB
-choose the right model for your phone either ZE520KL(5.0inch) or ZE552KL(5.5inch)
-rename the twrp recovery you just downloaded to "oreo_twrp_recovery.img"
-then put your phone to 'fastboot' mode and connect usb to laptop/pc
-put the twrp recovery that you just downloaded inside the 'Kit Root Zenfone 3' on your laptop/pc
-press shift and right click then click on 'Open command window here'
-then on cmd, type "fastboot flash recovery oreo_twrp_recovery.img" and click enter
-it will tell you flashing is finished
-then click on cmd type 'fastboot reboot' and click enter
-then your phone are now using TWRP recovery instead of the stock recovery
-next, go to magisk manager . com (no space)
-download the magisk manager apk version 5.5.5 [2.4mb]
-download magisk v15 [5.81mb] zip file
-boot your phone and install the magisk manager apk like normal
-then put the magisk v15 zip file to your SD card
-then boot your phone to TWRP recovery and flash the magisk v15 zip file
-after done, reboot system from twrp recovery
-open the magisk manager app and you're ROOTED!
done. your welcome.
[MY REVIEW OF THE OFFICIAL OREO FIRMWARE AFTER ALMOST A WEEK OF USE]
-oreo battery life sucks compare to stock nougat rom
-i can notice the battery drain faster than when im on nougat
-system performance, for me 5-10% faster than on nougat, especially the in settings or swiping the notification panel, other than its the same
-gaming performance are 10-15% worse than on nougat. when i play a game called 'Dokdo', moving the ship around the ocean are smoother when im on nougat and the framerate are stable, but when i play the game on oreo, the framerate are lower and i can feel the difference when im playing on nougat and oreo. the game feels more smoother when im on nougat compare to oreo. other games performance also noticeable when i play 'Rules of Survival', i can feel the framerate are slightly smoother on nougat compare to oreo
-there's no bugs that i found so far
[MY FINAL REVIEW OF ZENFONE 3 OFFICIAL OREO FIRMWARE]
-oreo battery life is real ****, i dont even have many apps installed and the battery life is already ****
-i prefer the nougat firmware compare to oreo.
-the only thing that i like about oreo is the quick settings icon are changed, it looks cleaner and smaller compare to nougat the quick settings icons are bigger and doesn't look good
-everyday i check on https://www.asus.com/Phone/ZenFone-3-ZE552KL/HelpDesk_BIOS/ hoping there's a new oreo firmware update saying 'battery life improved' or something thats all i want
*14 february guide updates*
incase you guys hasn't already know, there's a second(current latest) oreo updates from asus, the firmware is called 'Version WW-15.0410.1801.40'.
if you are on rooted oreo firmware 'Version WW-15.0410.1712.31' and you want to update to the latest oreo version and root it again. follow this steps below:
*NOTE: you can't proceed to flash the stock firmware if you're phone are rooted so you need to unroot or remove magisk root first before flashing the oreo firmware otherwise the flashing process will fail or a possible of bootloop will occur, so follow the steps below carefully*
-first, you need to remove magisk root by downloading the magisk uninstaller zip file from the magisk manager . com (no space) or from their xda page
-then flash/install the magisk uninstaller zip file from TWRP recovery
-after you flashed the uninstaller, you're phone are now unrooted. then you can proceed to flash the 'Version WW-15.0410.1801.40' firmware.
-after you flashed the 'Version WW-15.0410.1801.40' firmware your TWRP recovery will be replaced back to asus stock recovery
-so you need to reinstall TWRP recovery as usual through fastboot
-reboot your phone as usual and as you know your phone root access is currently gone since you uninstalled magisk earlier
-to root your phone back, download and install the latest magisk manager from their site or xda site
-click on download zip file, and put that magisk zip file on your SD CARD
-boot to twrp recovery
-flash the magisk zip file that are located on your SD CARD
-reboot system
-now your latest 'Version WW-15.0410.1801.40' firmware are now rooted again.
YES I KNOW IT IS SUCH A HASSLE, BUT THIS IS WHAT YOU MUST GET THROUGH IF YOU WANT ROOT ACCESS. ANDROID IS NOT EASY.
By the way, don't go to magiskmanager<dot>com. It's not official.
Download Magisk from the official thread here: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
w1040 said:
-next, go to magisk manager . com (no space)
Click to expand...
Click to collapse
Careful with that site, as that's not an official distribution site for Magisk. There was a tweet from XDA regarding that site within the past few weeks. The only 100% trustworthy place to get it is from the official thread.
I'm getting better battery life on Oreo than I did on Nougat. I did do a factory reset after installing Oreo, though, so if you haven't done that it's worth a try.
You're right about the framerate issue with some games. Some that ran fine on Nougat get oddly choppy at times on Oreo. The last Oreo beta (although it had the same version number) was a heck of a lot worse than the release version, so hopefully the next update will help.
the reason why i put the magisk manager official site is because i rooted my phone by downloading both the magisk manager apk and the zip file and the app and the zip file from their official site works for rooting my phone so i think there is no harm. if you feel insecure you can just go to https://forum.xda-developers.com/app...mless-t3473445
Not working.
I exactly followed the steps but I could not install twrp. Stock recovery still keeps running.
However, If I use the previous version of twrp (20180203) phone cannot boot, then had to flash roms from M to O.
Edit: I tried over and over again and succeeded at last, but I do not know how exactly!
asenler said:
I exactly followed the steps but I could not install twrp. Stock recovery still keeps running.
However, If I use the previous version of twrp (20180203) phone cannot boot, then had to flash roms from M to O.
Edit: I tried over and over again and succeeded at last, but I do not know how exactly!
Click to expand...
Click to collapse
at cmd when you're phone on fastboot. after you typed "fastboot flash recovery (name of your recovery)".img and enter, make sure it says flashing successful.
new firmware
How about ZE552KL_ WW_15.0410.1801.40 ?
asenler said:
How about ZE552KL_ WW_15.0410.1801.40 ?
Click to expand...
Click to collapse
what about it? i have yet to flash it
So the same procedure applies.
Flash the update + go to fastboot + re-install magisk.
Success.
Thanks everyone.
asenler said:
So the same procedure applies.
Flash the update + go to fastboot + re-install magisk.
Success.
Thanks everyone.
Click to expand...
Click to collapse
yes, its the same procedure. the latest firmware update is still oreo afterall
GUIDE UPDATES - 14 february
Hi !
So yesterday I tried flashing TWRP but no luck.
I'm on the latest firmware (1801), bootloader unlocked, stock recovery with no root.
When I try to flash TWRP with fastboot, I get no error message but I still have the stock recovery instead of TWRP.
I tried multiple times and downloaded the file again but it doesn't work.
Any idea ?
aftee you flashed twrp through fastboot. type on "fastboot reboot" on cmd. then if your phone directs you to stock recovery instead of twrp. click on reboot system in your stock recovery. then it will brings you to twrp. i know its weird. but thats what happen to me too at first.
then if you finally got to twrp and you reboot system from twrp but your phone still brings you back to twrp recovery everytime or it stucks on asus logo (bootloop), dont panic, go to twrp and flash your stock oreo firmware that are located from ur sdcard from twrp, then when you reboot system from twrp, then your phone will boot to normal. dont worry it wont erase data.
try this. it works for me.
Guys. Can I use the above, android already oreo but not in unlock bootloader.
Putra.dim said:
Guys. Can I use the above, android already oreo but not in unlock bootloader.
Click to expand...
Click to collapse
its not possible to root zenfone 3 without unlocking bootloader.
w1040 said:
its not possible to root zenfone 3 without unlocking bootloader.
Click to expand...
Click to collapse
I've been looking for how to unlock zen 3 oroe. but i did not find it. please help me. i want to root my phone.
Here is the official unlock method.
You will not be able to get OTA updates then, but zenfone3 may not get any upgrade anyway.
I found the solution to my problem (couldn't boot into twrp after flashing it)
1-After flashing twrp, do not fastboot reboot !
2-Unplug the device
3-Power it off (long press power key)
4-Power it on into recovery mod (long press power key + low volume key)
You should end up in twrp recovery or on a screen suggesting to boot into recovery which you do
5-A message will appear asking to allow modification of twrp recovery. Swipe to allow.
6-Done !
w1040 said:
aftee you flashed twrp through fastboot. type on "fastboot reboot" on cmd. then if your phone directs you to stock recovery instead of twrp. click on reboot system in your stock recovery. then it will brings you to twrp. i know its weird. but thats what happen to me too at first.
then if you finally got to twrp and you reboot system from twrp but your phone still brings you back to twrp recovery everytime or it stucks on asus logo (bootloop), dont panic, go to twrp and flash your stock oreo firmware that are located from ur sdcard from twrp, then when you reboot system from twrp, then your phone will boot to normal. dont worry it wont erase data.
try this. it works for me.
Click to expand...
Click to collapse
After updating on 15.0410.1801.40, i flash TWRP through fastboot, and i get stuck in bootloop on Asus logo. I go back in TWRP,flash the 15.0410.1801.40 zip, and i remain in bootloop.
With a custom recovery, we didn't need any No Verity File Encrypt like root in Nougat? (On nougat I root my ZE552KL by following this process: https://forum.xda-developers.com/zenfone-3/how-to/twrp-recovery-3-0-2-root-zenfone-3-t3569926)
siberflyers said:
After updating on 15.0410.1801.40, i flash TWRP through fastboot, and i get stuck in bootloop on Asus logo. I go back in TWRP,flash the 15.0410.1801.40 zip, and i remain in bootloop.
With a custom recovery, we didn't need any No Verity File Encrypt like root in Nougat? (On nougat I root my ZE552KL by following this process: https://forum.xda-developers.com/zenfone-3/how-to/twrp-recovery-3-0-2-root-zenfone-3-t3569926)
Click to expand...
Click to collapse
if you got bootloop after trying to reboot ur phone from twrp after flashing twrp. flashing the stock oreo rom from twrp again will make your phone boot. thats how i did it. im not sure why it doesn't work for you.
we still need "no verity..." message in oreo. that no verity message appears are actually caused by your phone bootloader unlocked not because of your phone rooted.
Those who are looking for stock 19s ROM, the g drive link is here
https://drive.google.com/uc?id=0BwU--kMdOmZiREUxUXR2eTgwX2s&export=download
How to flash?
Put the file downloaded in root directory
Boot into fastboot mode
Flash stock recovery
Now boot into TWRP recovery using following command
fastboot boot TWRP.img
Wipe Cache, dalvik cache and system.
Reboot to recovery
Now you will be in stock recovery
Update from here.
First boot might take time.
Is it possible to flash this with twrp?
Sent from my X520 using Tapatalk
lak2004mi said:
Is it possible to flash this with twrp?
Sent from my X520 using Tapatalk
Click to expand...
Click to collapse
No only via stock recovery
djdeve said:
Those who are looking for stock 19s ROM, the g drive link is here
https://drive.google.com/uc?id=0BwU--kMdOmZiREUxUXR2eTgwX2s&export=download
How to flash?
Put the file downloaded in root directory
Boot into fastboot mode
Flash stock recovery
Now boot into TWRP recovery using following command
fastboot boot TWRP.img
Wipe Cache, dalvik cache and system.
Reboot to recovery
Now you will be in stock recovery
Update from here.
First boot might take time.
Click to expand...
Click to collapse
if i flash stock recovery thn if i try to boot into recovery thn phone will open in stock recovery only thn hw cn i flash?
cjcool_123 said:
if i flash stock recovery thn if i try to boot into recovery thn phone will open in stock recovery only thn hw cn i flash?
Click to expand...
Click to collapse
True..
Use Chinese twrp and flash .. Works for me and many others .. Ensure to flash no verity zip post flashing
Or do changes in updater script and repack the zip
cjcool_123 said:
if i flash stock recovery thn if i try to boot into recovery thn phone will open in stock recovery only thn hw cn i flash?
Click to expand...
Click to collapse
After flashing stock recovery don't reboot you phone in stock recovery, bcoz you can't wipe system in stock recovery to do so ,
Reboot your phone into fastboot mode by pressing vol down and power button and connect your phone to PC and from CMD prompt run the following command
Fastboot boot twrp.img
Actually my phone was bootlooped when i tried installing twrp img of chinese version and im unable to flash ROM. Before this i used latest twrp and flashed RR and lineage OS. Volte worked fine in both the roms and in stock rom too. After this happened i installed AIO tool kit and flashed chinese twrp again. Then done flashing with lineage OS there the volte is broken. I thought it would be some software error and i tried flashing RR and found the same broken volte! Can anyone help me out in enabling volte in my le eco le2 (s2) x526.
Bootloader and Modem S2
Try flashing 19s bootloader and modem from here
https://host.llamasweet.tech/codeworkx/lineage/s2/
Thankx @codeworkx for this.
one more link for stock 19s rom
https://drive.google.com/file/d/1BgXejpbVug4KR5Mc6-eFWom6gVR96UhK/view?usp=drivesdk
custom to stock rom
if we are in custom rom and we have to go back for stock rom with stock recovery will it work by just copying the zip file into the phone and rename into update.zip
And then clicking on update will it work Guys ??
error while installing This package is for "le_s2_ww" devices;this is a "s2'.
bootloop
I tried to install the stock ROM provided by 2 ways :-
1) booting into previous version of twrp using fastboot commands and then the regular install after wiping required files.
2) Renaming it to update.zip and placing it into sdcard then via stock recovery.
it gets installed every time without any error but gets into boot loop with both steps.
Is there any way to get completely stock again ?
akakumar said:
I tried to install the stock ROM provided by 2 ways :-
1) booting into previous version of twrp using fastboot commands and then the regular install after wiping required files.
2) Renaming it to update.zip and placing it into sdcard then via stock recovery.
it gets installed every time without any error but gets into boot loop with both steps.
Is there any way to get completely stock again ?
Click to expand...
Click to collapse
Flash twrp via following toolkit .beacause only this recovery works to flash stock roms
https://forum.xda-developers.com/devdb/project/?id=16391#downloads
Open twrp do factory reset and wipe data , cache , dalvik cache . Dont wipe system . Then flash the rom . Dont flash magisk or any root app . Reboot . You got a notification from twrp that replace stock recovery . Dont replace recovery . Once rom boot setup everything .now bootloader is locked and twrp replaced via stock recovery .
Deepjashan said:
Flash twrp via following toolkit .beacause only this recovery works to flash stock roms
https://forum.xda-developers.com/devdb/project/?id=16391#downloads
Open twrp do factory reset and wipe data , cache , dalvik cache . Dont wipe system . Then flash the rom . Dont flash magisk or any root app . Reboot . You got a notification from twrp that replace stock recovery . Dont replace recovery . Once rom boot setup everything .now bootloader is locked and twrp replaced via stock recovery .
Click to expand...
Click to collapse
Hard Luck !!
its been more than half an hour and still at the same boot loop. the installation was successful as well , screenshot attached below.
PS: Ignore the cracked screen.
akakumar said:
Hard Luck !!
its been more than half an hour and still at the same boot loop. the installation was successful as well , screenshot attached below.
PS: Ignore the cracked screen.
Click to expand...
Click to collapse
I use this mathod everytime when i need stock rom. It works for me
my phone caps my speed to 4 Mbps after few minutes. It's not a isp or router based problem.
Actually I faced this problem after I flashed back to Eui 19s from 21s.
akakumar said:
I tried to install the stock ROM provided by 2 ways :-
1) booting into previous version of twrp using fastboot commands and then the regular install after wiping required files.
2) Renaming it to update.zip and placing it into sdcard then via stock recovery.
it gets installed every time without any error but gets into boot loop with both steps.
Is there any way to get completely stock again ?
Click to expand...
Click to collapse
Deepjashan said:
Flash twrp via following toolkit .beacause only this recovery works to flash stock roms
https://forum.xda-developers.com/devdb/project/?id=16391#downloads
Open twrp do factory reset and wipe data , cache , dalvik cache . Dont wipe system . Then flash the rom . Dont flash magisk or any root app . Reboot . You got a notification from twrp that replace stock recovery . Dont replace recovery . Once rom boot setup everything .now bootloader is locked and twrp replaced via stock recovery .
Click to expand...
Click to collapse
Alright I found a way ...I read it in some other discussion on le2 .
The step by step procedure to get stock back is listed :-
1) As usual reboot to recovery
2) wipe cache, dalvik, system and data
3)install the stock ROM
Now when you reboot you will get stuck into boot loop at the leeco logo.... wait for 5 mins and test your luck if it works otherwise follow next
4) go back to recovery by pressing vol up and power button.
5) install Andromodx kernel
Reboot and voila you have it running.
Also you can flash the stock recovery and lock OEM by fastboot commands
The only issues I have right now are two
1) the display scale is set to zoom and even if I set it to standard it reboots but doesn't change. I scaled down pixel density by adb commands but still its weird at some places
2) it crashes a lot ... sometimes when I press home or multitasking button it just goes black and EUI reboots. I also did a factory reset but no use.
If anyone can help me in that ....:laugh:
flash
djdeve said:
No only via stock recovery
Click to expand...
Click to collapse
give complted process for flash stock rom to letv le 2 x526
Error while flashing
Error while installing This package is for "le_s2_ww" devices;this is a "s2'.
Can you do something about it ?
akakumar said:
Hard Luck !!
its been more than half an hour and still at the same boot loop. the installation was successful as well , screenshot attached below.
PS: Ignore the cracked screen.
Click to expand...
Click to collapse
Just figured this out with the help of another post on a separate thread.
It seems that the latest twrp for x526 (v 3.2.1.0) has a bug such that when you format the data partition - it writes a wrong partition size.
This causes the boot loop with the stock ROM (other custom ROMs seems to be happy living with the error).
An associated side effect of the wrong partition size is that you wont be able to encrypt your phone on the custom ROM (the encryption process simply causes the phone to reboot without doing anything).
To resolve this, downgrade twrp to v 3.0.2. Then format cache/system/data.
Then mount the phone to your PC (enable MTP) and copy the stock ROM of your choice.
You need to update the "updater-script" and comment out the version check - and then you can install the stock ROM using twrp.
This worked for me.
Hope it works for you as well.
PS: Once you install the stock ROM, the data partition gets encrypted and first boot takes a lot of time.
Be patient and also know that twrp will no longer be able to decrypt your data partition (I think either twrp is broken OR the stock ROM uses some other default password to encrypt the data partition and hence decryption fails. I have tried using my screen lock PIN and it doesn't work and "default_password" does not work either.
All the best.
---------- Post added at 06:56 AM ---------- Previous post was at 06:52 AM ----------
satyamsahu366 said:
Error while installing This package is for "le_s2_ww" devices;this is a "s2'.
Can you do something about it ?
Click to expand...
Click to collapse
Open the update.zip file on your PC and navigate to META-INF/com/google/android.
You will find a file by the name updater-script.
Use your favourite text editor to open this file and then find the following line:
get_device_compatible("le_s2_ww") == "OK" || abort("This package is for "le_s2_ww" devices; this is a "" + getprop("ro.product.device") + "".");
Insert a # at the beginning of the line to get the installer to ignore the version mismatch and you should be good to go.
It should now look like this:
#get_device_compatible("le_s2_ww") == "OK" || abort("This package is for "le_s2_ww" devices; this is a "" + getprop("ro.product.device") + "".");
Now save this file and update the zip file / create a zip file again and then proceed with the installation as usual.
Prerequisite
1. Unlocked Bootloader
2. OrangeFox Recovery or TWRP Recovery
3. Latest adb & fastboot files
4. Stock ROM ZIP files
5. Stock Recovery [OPTIONAL]
Custom Recovery Method:
1. Enable USB-Debugging: adb reboot recovery or hold the volume up while rebooting or hold the volume down to enter bootloader & choose Reboot to Recovery by volume buttons, power key to enter.
2. Copy the Stock ROM zip to your device via adb push RMX1851_flashable_*.zip /sdcard or MTP
3. Wipe data, cache & dalvik (format data if stuck at boot animation)
4. Locate the zip file & Install
5. Flashing all the partitions with stock files takes time. Hold for a while.
6. After successful install of the zip. Your device will have Stock Recovery with Stock ROM. Finally Reboot.
Fastboot Method:
Note: Following process formats internal storage, so backup the internal storage files. If your device is in Stock ROM & somehow system partition is messed up just flash only system.
1. Download required Fastboot files
2. If downloaded 7z files, extract system.img file.
3. Enter
Code:
fastboot -w && fastboot erase system && fastboot flash recovery recovery.img && fastboot flash boot boot.img && fastboot flash vbmeta vbmeta.img && fastboot flash dtbo dtbo.img && fastboot flash system system.img && fastboot reboot
4. It takes a while to flash System partition, have patience.
5. Device reboots to system if everything is flashed successfully.
Stock Recovery Method:
1. Download Stock ROM OZIP Files & Stock Recovery
2. Copy *.ozip to sdcard or internal storage.
2. Goto fastboot & enter fastboot flash recovery recovery.img
3. Reboot to recovery, wipe (1st option). Then go back to main menu Install from storage locate the *.ozip file & install.
I'm sorry, but this doesn't work for me..stuck with the rooted but uninstalled magisk OS.. :'(
ceesiama said:
I'm sorry, but this doesn't work for me..stuck with the rooted but uninstalled magisk OS.. :'(
Click to expand...
Click to collapse
zip isn't installed successfully? can you also send screenshot, so I can help you.
4j17h said:
zip isn't installed successfully? can you also send screenshot, so I can help you.
Click to expand...
Click to collapse
https://forum.xda-developers.com/realme-3-pro/how-to/guide-unlock-bootloader-install-twrp-t3938845
I followed this guide, everything went smooth, magisk was also installed and rooted. But I tried setting fingerprint and set lock pin, But it says wrong pin everytime, so i had to reset the phone again. I used the same method above. But this time magisk won't install no matter how many times I reset my phone using the above method. So I thought if I could revert back to stock, maybe I can root and install magisk again. So i followed your guide.
After installing the stock zip and reboot to system, it stuck on bootloop(realme logo), then I flash back using the above method again, I can log in to the phone, and red notification says root has been detected, but magisk is not installed, ive tried many things but still i cannot install magisk. I've tried your guide 2/3 bootloop everytime. What could be the problem? I am not very much of a tech genus :'(
ceesiama said:
https://forum.xda-developers.com/realme-3-pro/how-to/guide-unlock-bootloader-install-twrp-t3938845
I followed this guide, everything went smooth, magisk was also installed and rooted. But I tried setting fingerprint and set lock pin, But it says wrong pin everytime, so i had to reset the phone again. I used the same method above. But this time magisk won't install no matter how many times I reset my phone using the above method. So I thought if I could revert back to stock, maybe I can root and install magisk again. So i followed your guide.
After installing the stock zip and reboot to system, it stuck on bootloop(realme logo), then I flash back using the above method again, I can log in to the phone, and red notification says root has been detected, but magisk is not installed, ive tried many things but still i cannot install magisk. I've tried your guide 2/3 bootloop everytime. What could be the problem? I am not very much of a tech genus :'(
Click to expand...
Click to collapse
ok no problem, so what do you want to know about? Clear data, cache, dalvik after or before flashing stock zip it won't bootloop. Yes, since device is decrypted lock screen doesn't work. Coming to Magisk, yes that method is not reliable. I have figured out 100% working way which works for everyone & doesn't fail anytime. Maybe I will make a new guide soon or ...Mod edit: Link to Telegram removed
4j17h said:
ok no problem, so what do you want to know about? Clear data, cache, dalvik after or before flashing stock zip it won't bootloop. Coming to Magisk, yes that method is not reliable. I have figured out 100% working way which works for everyone & doesn't fail anytime. Maybe I will make a new guide soon or ...Mod edit: Link to Telegram removed
Click to expand...
Click to collapse
I'm sorry I mistyped in the above comment, when i followed your method, zip installed successfully but it bootlooped into stock recovery everytime. I hope that clarifies a bit. I''ll be very grateful if you can help me..
ceesiama said:
https://forum.xda-developers.com/realme-3-pro/how-to/guide-unlock-bootloader-install-twrp-t3938845
I followed this guide, everything went smooth, magisk was also installed and rooted. But I tried setting fingerprint and set lock pin, But it says wrong pin everytime, so i had to reset the phone again. I used the same method above. But this time magisk won't install no matter how many times I reset my phone using the above method. So I thought if I could revert back to stock, maybe I can root and install magisk again. So i followed your guide.
After installing the stock zip and reboot to system, it stuck on bootloop(realme logo), then I flash back using the above method again, I can log in to the phone, and red notification says root has been detected, but magisk is not installed, ive tried many things but still i cannot install magisk. I've tried your guide 2/3 bootloop everytime. What could be the problem? I am not very much of a tech genus :'(
Click to expand...
Click to collapse
Try install magisk manager, maybe ur device still rooted
haditriw said:
Try install magisk manager, maybe ur device still rooted
Click to expand...
Click to collapse
no that's not how magisk works in Realme 3 Pro, if device is restarted there will be no magisk. You need to goto fastboot then goto recovery, it boots to system. We have magisk. Yes this method tricky. I am going to publish new guide, it will be simple & straight forward.
Bricked/ Bootlooping
4j17h said:
Prerequisite
1. Unlocked Bootloader
2. OrangeFox Recovery or TWRP Recovery or Pitch Black Recovery
3. Latest adb & fastboot files
4. Stock ROM zip files: RMX1851_A15
5. Stock Recovery [OPTIONAL]
Follow the below steps:
1. Enable USB-Debugging: adb reboot recovery or hold the volume up while rebooting or hold the volume down to enter bootloader & choose Reboot to Recovery by volume buttons, power key to enter.
2. Copy the Stock ROM zip to your device via adb push RMX1851_flashable_A15.zip /sdcard or MTP
3. Wipe data, cache & dalvik
4. Locate the zip file & Install
5. Flashing all the partitions with stock files takes time. Hold for a while.
6. After successful install of the zip, Reboot to System. You get the stock Recovery & stock ROM.
Previous Firmware: RMX1851_A14 Google Drive || AndroidFileHost || Mega Cloud storage
Note: This guide will be updated in coming days with fastboot flash files & custom recovery flashable files with latest versions.
Click to expand...
Click to collapse
pls help me, im stuck on bootlooop :'(
---------- Post added at 04:53 PM ---------- Previous post was at 04:52 PM ----------
4j17h said:
Prerequisite
1. Unlocked Bootloader
2. OrangeFox Recovery or TWRP Recovery or Pitch Black Recovery
3. Latest adb & fastboot files
4. Stock ROM zip files: RMX1851_A15
5. Stock Recovery [OPTIONAL]
Follow the below steps:
1. Enable USB-Debugging: adb reboot recovery or hold the volume up while rebooting or hold the volume down to enter bootloader & choose Reboot to Recovery by volume buttons, power key to enter.
2. Copy the Stock ROM zip to your device via adb push RMX1851_flashable_A15.zip /sdcard or MTP
3. Wipe data, cache & dalvik
4. Locate the zip file & Install
5. Flashing all the partitions with stock files takes time. Hold for a while.
6. After successful install of the zip, Reboot to System. You get the stock Recovery & stock ROM.
Previous Firmware: RMX1851_A14 Google Drive || AndroidFileHost || Mega Cloud storage
Note: This guide will be updated in coming days with fastboot flash files & custom recovery flashable files with latest versions.
Click to expand...
Click to collapse
pls help me, im stuck on bootloop :'(
malakaz27 said:
pls help me, im stuck on bootlooop :'(
---------- Post added at 04:53 PM ---------- Previous post was at 04:52 PM ----------
pls help me, im stuck on bootloop :'(
Click to expand...
Click to collapse
I have seen you have started a new thread of bootloop. Is this because you flashed one of these stock zip? you were going back to stock from los?
this method worked perfectly fine for me. i tried both lineage os roms available and both of them caused bootloop or end up destroying boot. so thanks to developer for making this zip file.
4j17h said:
I have seen you have started a new thread of bootloop. Is this because you flashed one of these stock zip? you were going back to stock from los?
Click to expand...
Click to collapse
hi i am stuck in bootloop after flashing all stuff in fastboot guide
leo77g said:
hi i am stuck in bootloop after flashing all stuff in fastboot guide
Click to expand...
Click to collapse
bootloop to recovery? have you tried fastboot -w usually this should boot to system or else flash stock recovery, wipe full. This should definitely get back the device to system.
4j17h said:
bootloop to recovery? have you tried fastboot -w usually this should boot to system or else flash stock recovery, wipe full. This should definitely get back the device to system.
Click to expand...
Click to collapse
formatting worked and thanx for help )
Moderators' Announcement: I've removed the links to Telegram and references to it. This is not a development thread, and support is to be provided through XDA. Many posts proved this has not been the case!
You may be asking, "Why was my Telegram or Whatsapp thread closed?"
Well, it's just becoming too much.
Going forward, we will only allow one Telegram chat link on a development thread by the ROM's developer and only if thorough support is still provided in the ROM thread on XDA.
All discussion channels, photography channels, whatnot channels will be strongly discouraged and removed with immediate effect. Please reference the forum rules:
Self-promotion is forbidden, this includes blogs, social media and video channels etc. Random links will be removed.
Click to expand...
Click to collapse
Also, we now have an official XDA Discord Server. We would encourage you to try it out.
Announcing the Official XDA-Developers Discord Server
FYI
Thanks,
The Moderation Team
Click to expand...
Click to collapse
Need Help
Hi, everybody. Really need help.
There is a phone Realme X Lite. Write that it is Realme 3 Pro for the Chinese market, as well as firmware.
My version was: RMX1851_11_A.05
Tried to flash RMX1851EX_11_OTA_0150_all_2Zfcensdoezk.ozip, recovery gave an error, *_0140_* wrote that the current version is newer.
In depth test APK on the version out of the box wrote that this version of the phone is not supported, so the bootloader could not unlock.
But in the official website came across an offer to join the testing of Android Q
r1.realme.net/general/20190522/1558492614147.pdf
There are two files, the second for rollback.
I installed P2Q, everything went well, but the SnapDragon camera is used and it is terrible if there is not enough light. In depth test is not even installed, apparently not supported in the new version.
I decided to roll back, chose in Recovery Q2P archive, there were no errors, but after rebooting the phone hangs on the initial screen saver and after 10 minutes throws in the recovery with the error "Data error, select wipe data to recovery system". Wipe doesn't help. The same with other archives for Realme 3 Pro.
Also found RMX1851_11_A.12_190423_abecd1fa.ofp for firmware via MsmDownloadTool, but it requires authorization and support refuses to call login details.
Can who faced a similar problem on this or other phone.
Please help, pay for the time spent =)
ResSetOk said:
Hi, everybody. Really need help.
There is a phone Realme X Lite. Write that it is Realme 3 Pro for the Chinese market, as well as firmware.
My version was: RMX1851_11_A.05
Tried to flash RMX1851EX_11_OTA_0150_all_2Zfcensdoezk.ozip, recovery gave an error, *_0140_* wrote that the current version is newer.
In depth test APK on the version out of the box wrote that this version of the phone is not supported, so the bootloader could not unlock.
But in the official website came across an offer to join the testing of Android Q
r1.realme.net/general/20190522/1558492614147.pdf
There are two files, the second for rollback.
I installed P2Q, everything went well, but the SnapDragon camera is used and it is terrible if there is not enough light. In depth test is not even installed, apparently not supported in the new version.
I decided to roll back, chose in Recovery Q2P archive, there were no errors, but after rebooting the phone hangs on the initial screen saver and after 10 minutes throws in the recovery with the error "Data error, select wipe data to recovery system". Wipe doesn't help. The same with other archives for Realme 3 Pro.
Also found RMX1851_11_A.12_190423_abecd1fa.ofp for firmware via MsmDownloadTool, but it requires authorization and support refuses to call login details.
Can who faced a similar problem on this or other phone.
Please help, pay for the time spent =)
Click to expand...
Click to collapse
since your bootloader is locked, all you can do is wipe full data or flash back P2Q then format & then flash Q2P.
4j17h said:
since your bootloader is locked, all you can do is wipe full data or flash back P2Q then format & then flash Q2P.
Click to expand...
Click to collapse
I did Wipe before and after firmware, on P2Q is stitched without problems, but under firmware in Q2P in recovery writes, that not managed wipe userdata. The data was not encrypted, the password is not asked.
do you have video for Fastboot Method ?
[No message]
My realme gt neo2 is stuck on bootloop, already tried OFP Flash but nothing, still stuck.
update --
I have managed to get back to realme ui recovery, but not even if I format data, still on fastboot
is it on bootloop or just constantly restarting to fastboot? try flashing the stock rom with the twrp flashable stock rom firmware.
rafaelpcosta said:
is it on bootloop or just constantly restarting to fastboot? try flashing the stock rom with the twrp flashable stock rom firmware.
Click to expand...
Click to collapse
If I start the device, it goes on fastboot, if I click recovery it goes on rui recovery mode, but even if I format data and restart it does the same (start on fastboot)
Lucxq said:
If I start the device, it goes on fastboot, if I click recovery it goes on rui recovery mode, but even if I format data and restart it does the same (start on fastboot)
Click to expand...
Click to collapse
Flash twrp via fastboot and flashable stock rom from twrp.
Alexj7 said:
Flash twrp via fastboot and flashable stock rom from twrp.
Click to expand...
Click to collapse
already did, still nothing..
hi, i have mine since two days.
1. unlock bootloader
2. boot in twrp with "fastboot boot recovery.img"
3. install twrp by press "install -> image install"
4. install magisk in trwp et boot the stock rom
5. restart in twrp and install elixir..A13...
6. reboot the phone with result of touch screen not responding
7. 8. 9. ....... try format Data, change twrp version, flash other rom with no succes.
Now i'm on elixir[A13] and will give a try at arrowsOS.
my solution if it can help you:
1. go here: https://forum.xda-developers.com/t/...-realme-gt-neo-2-bitra-fastboot-mode.4399223/
and try to remember whaat was the last android version you had on your phone.
2. download it and flash it with the little application, if it failed or stuck on "flashing ..." WAIT first 10min, disconnect your phone and reflash it with same method (i flash it three time and no one go to the end).
3. reboot your phone and if you're lucky, you can enter in.
4. make all updates for your android version
5. when you will be on rui3.0, you can remade the first step for playing with bootloader, recovery and recent custom rom.
hope it help you...
soory for my english
sanzostef said:
hi, i have mine since two days.
1. unlock bootloader
2. boot in twrp with "fastboot boot recovery.img"
3. install twrp by press "install -> image install"
4. install magisk in trwp et boot the stock rom
5. restart in twrp and install elixir..A13...
6. reboot the phone with result of touch screen not responding
7. 8. 9. ....... try format Data, change twrp version, flash other rom with no succes.
Now i'm on elixir[A13] and will give a try at arrowsOS.
my solution if it can help you:
1. go here: https://forum.xda-developers.com/t/...-realme-gt-neo-2-bitra-fastboot-mode.4399223/
and try to remember whaat was the last android version you had on your phone.
2. download it and flash it with the little application, if it failed or stuck on "flashing ..." WAIT first 10min, disconnect your phone and reflash it with same method (i flash it three time and no one go to the end).
3. reboot your phone and if you're lucky, you can enter in.
4. make all updates for your android version
5. when you will be on rui3.0, you can remade the first step for playing with bootloader, recovery and recent custom rom.
hope it help you...
soory for my english
Click to expand...
Click to collapse
Hi!
I fixed the problem by using a OFP flash tool
The only thing that I have to do now is to upgrade the version of android (from 11 to 13)
Thanks for the reply tho!
Lucxq said:
Hi!
I fixed the problem by using a OFP flash tool
The only thing that I have to do now is to upgrade the version of android (from 11 to 13)
Thanks for the reply tho!
Click to expand...
Click to collapse
you're welcome, yesterday i cry about my two days phone so if that can help. and yes OFP is the link i post in my answer.
sanzostef said:
hi, i have mine since two days.
1. unlock bootloader
2. boot in twrp with "fastboot boot recovery.img"
3. install twrp by press "install -> image install"
4. install magisk in trwp et boot the stock rom
5. restart in twrp and install elixir..A13...
6. reboot the phone with result of touch screen not responding
7. 8. 9. ....... try format Data, change twrp version, flash other rom with no succes.
Now i'm on elixir[A13] and will give a try at arrowsOS.
my solution if it can help you:
1. go here: https://forum.xda-developers.com/t/...-realme-gt-neo-2-bitra-fastboot-mode.4399223/
and try to remember whaat was the last android version you had on your phone.
2. download it and flash it with the little application, if it failed or stuck on "flashing ..." WAIT first 10min, disconnect your phone and reflash it with same method (i flash it three time and no one go to the end).
3. reboot your phone and if you're lucky, you can enter in.
4. make all updates for your android version
5. when you will be on rui3.0, you can remade the first step for playing with bootloader, recovery and recent custom rom.
hope it help you...
soory for my english
Click to expand...
Click to collapse
there is one stock rom firmware that gives that problem, at least that's what happened to me previously or also when touch did not work it was when flashed custom rom on wrong firmware version, let's say rom required rui 3 c05 but I used rui 3 c07 which caused problems.
rafaelpcosta said:
there is one stock rom firmware that gives that problem, at least that's what happened to me previously or also when touch did not work it was when flashed custom rom on wrong firmware version, let's say rom required rui 3 c05 but I used rui 3 c07 which caused problems.
Click to expand...
Click to collapse
exactly. not really the first time for me. it can append when your recovery is out of date also.
i'm not a dev but interresting with for long year and i think flashing rom don't errase all that why we always need to flash custom rom according to our android version.