Database Info

Bricked?

Hello community
I think i bricked my P8 MAX.
What i did, rooted the phone with Kingroot, altered the Dualwindow file.
Three days ago i tried to install B209 and now it won´t boot up.
I always stay at the animated Huawei Logo.
erecovery is not able to load a Firmware and when i try to do something in Fastbbot, i always get remote command not allowed. In Fastboot it says PHONE Unlocked....
Any suggestions?

audiaudi said:
Hello community
I think i bricked my P8 MAX.
What i did, rooted the phone with Kingroot, altered the Dualwindow file.
Three days ago i tried to install B209 and now it won´t boot up.
I always stay at the animated Huawei Logo.
erecovery is not able to load a Firmware and when i try to do something in Fastbbot, i always get remote command not allowed. In Fastboot it says PHONE Unlocked....
Any suggestions?
Click to expand...
Click to collapse
Which Rom where installed before you updated to B209?

Hirs_E_Fruit said:
Which Rom where installed before you updated to B209?
Click to expand...
Click to collapse
B029

audiaudi said:
B029
Click to expand...
Click to collapse
Stock B029 with Stock Recovery?
OTA Update from B029 to B209?

Stock b029 with stock recovery
Rooted
B209 update through dload folder
I downloaded the b209 form kangvip thread, but the regular one.

audiaudi said:
Stock b029 with stock recovery
Rooted
B209 update through dload folder
I downloaded the b209 form kangvip thread, but the regular one.
Click to expand...
Click to collapse
You never got your Phon to start full into OS after update?

Nope

Does anybody know, why i always get remote command not allowed when using fastboot?

audiaudi said:
Does anybody know, why i always get remote command not allowed when using fastboot?
Click to expand...
Click to collapse
hey you only need flash these files from update.app
boot
cust
recovery
cache
system
reboot and when Android is finish booting copy the update.app to /dload in internal storage and reset factory... then... upgrade from internal storage... BACKUP you NVRAM contents but no lost IMEI how is my case

I can't....
fastboot flash boot boot.img
I get: remote command not allowed

do you have the BOOTLOADER UNLOCK ?..
fastboot oem unlock CODE
??
audiaudi said:
I can't....
fastboot flash boot boot.img
I get: remote command not allowed
Click to expand...
Click to collapse

On the screen it shows phone unlocked but i don't know if it's true cause I didn't unlock so it must have been unlocked before.
And i can't get an umlock code through the Huawei site cause i haven't the huawei id on the phone long enough and know, obviously i can't....

audiaudi said:
On the screen it shows phone unlocked but i don't know if it's true cause I didn't unlock so it must have been unlocked before.
And i can't get an umlock code through the Huawei site cause i haven't the huawei id on the phone long enough and know, obviously i can't....
Click to expand...
Click to collapse
I unlock bootloader with a paid tool..( dont say the name this tool... ), cost to 5 dlls USA

audiaudi said:
Hello community
I think i bricked my P8 MAX.
What i did, rooted the phone with Kingroot, altered the Dualwindow file.
Three days ago i tried to install B209 and now it won´t boot up.
I always stay at the animated Huawei Logo.
erecovery is not able to load a Firmware and when i try to do something in Fastbbot, i always get remote command not allowed. In Fastboot it says PHONE Unlocked....
Any suggestions?
Click to expand...
Click to collapse
Try this version of fastboot...
https://drive.google.com/folderview?id=0B5I_q70mNuR4bWp5Wl9LOGdFQnc

ajsmsg78 said:
Try this version of fastboot...
https://drive.google.com/folderview?id=0B5I_q70mNuR4bWp5Wl9LOGdFQnc
Click to expand...
Click to collapse
The same...
C:\test>fastboot flash boot boot.img
target reported max download size of 471859200 bytes
sending 'boot' (23406 KB)...
OKAY [ 0.511s]
writing 'boot'...
FAILED (remote: Command not allowed)
finished. total time: 0.529s

you extract the img files with a profile ??? I use the unknow... other... and mmmm you probe the names of file and partition are diferent ?
fastboot flash boot BOOT.IMG ...(name of file exactly )

same problem in here...
someone can help us?
FAILED (remote: Command not allowed)

same problem here.. please help us

Huawei P8 Max DAV703 Android 6.0 EMUI 4.0 64 GB chinese variant trying to convert to EU
Well I hope that it isn't completely FUBAR.. I know there has to be a way, but i forget how.
No fastboot, no adb support.. no recovery, no bootloader.. fastboot was only available through software.
I have hard reset which has reset it to bootloop, and I have system upgrade that whatever I do, crashes at 5%
Basically, I bricked my Huawei.
I partially rooted it with kingoroot without doing anything..
but other apps saw it as unrooted so i was going to do the proper way, unlock bootloader, etc..
Then I discovered the Huawei SRK tool for bootloader/kernel/recovery etc.
Checked if my bootloader was unlocked, it was..
restarted the phone, it was fine
Then I was going to flash the recovery, and that's when it went into a bootloop
Like always.. just the logo shows, and if i try to turn it off, it restarts.
Huawei P8 Max DAV703 Android 6.0 EMUI 4.0
hard reset works - pressiing vol up down and power pushes it into hard reset but it stays in bootloop.
usb in, vol down power - puts into update mode which stops at 5% with error.
My next idea would be to try and extract the necessary files and try to use the Huawei update extractor tool
but after trying many update files, I can't find the one that would work, unless it will just keep crashing at 5% always.
Would anyone know what I could do in this situation?

Honor 6A - Help needed

Hi,
I have just attempted to root my Honor 6A (which is no easy task, given its popularity) using TWRP installed via adb & fastboot.
Though when I got to Wipe my phone using TWRP, all the remaining files and folder were I believe encrypted (random strings of numbers and letters), therefore I couldn't find whatever image I was looking for.
I then attempted to reboot my phone and see what's going on, and only the navigation buttons are there, the rest of the screen being black, no android system.
I then attempted to use Huawei's eRecovery, but no luck, it can't find the "package" it needs to restore.
I also tried the fastboot + HiSuite option, it says the phone is not supported.
So what to do? What can I do? I have TWRP, unlocked bootloader.
I thought about flashing the stock rom but I can't find it anywhere, this phone literally has the worst support I've ever seen.
I'm thinking of just bringing this phone to after-sale services but not sure they'll help given the phone is unlocked and everything.

Yuuteru said:
Hi,
I have just attempted to root my Honor 6A (which is no easy task, given its popularity) using TWRP installed via adb & fastboot.
Though when I got to Wipe my phone using TWRP, all the remaining files and folder were I believe encrypted (random strings of numbers and letters), therefore I couldn't find whatever image I was looking for.
I then attempted to reboot my phone and see what's going on, and only the navigation buttons are there, the rest of the screen being black, no android system.
I then attempted to use Huawei's eRecovery, but no luck, it can't find the "package" it needs to restore.
I also tried the fastboot + HiSuite option, it says the phone is not supported.
So what to do? What can I do? I have TWRP, unlocked bootloader.
I thought about flashing the stock rom but I can't find it anywhere, this phone literally has the worst support I've ever seen.
I'm thinking of just bringing this phone to after-sale services but not sure they'll help given the phone is unlocked and everything.
Click to expand...
Click to collapse
I didn't understand really well what happened. Did you successful install the TWRP? can you put here the download link? What did you do to brick your phone?
As you have already discovered there isn't enough "modding" on our phone (I have the same model). As far as I know the Honor 6A's stock rom is not published on internet yet. The only methods that I know to obtain the rom are: ask to Huawei/Honor for it (I've tried to contact them, but they didn't reply) or dump it using a custom recovery.
I dumped an official update, it is for the model DLI-L22 and you can download it following this link (size: ~400MB). The update contains several files, in particular there is the update.app archive that you can open with this tool, the files inside update.app are the following:
Code:
ABOOT.img CMNLIB64.img ERECOVERY.img MODEM.img SBL1.img
AMSS_VER.img CMNLIB.img GPT.img MSADP.img SHA256RSA.img
AMSS_VERLIST.img CRC.img KEYMASTER.img PACKAGE_TYPE.img TZ.img
APDP.img DEVCFG.img LKSECAPP.img RECOVERY.img
BOOT.img DSP.img MDTP.img RPM.img
It seems to contain the original recovery and other stuff that maybe can help you. Please pay attention, because it is not the full rom, it is just an incremental update, for example SYSTEM.img and USERDATA.img are missing.
The best solution is that someone with the TWRP makes a dump of the official rom, unfortunately I have still the stock rom and I'm not sure to install the TWRP. The reason is because I don't want to lose the official updates, so you should wait for some other user with the same phone that shares the rom.
Maybe you can try to flash some of the component from the update that I've dumped, but it is risky.
In my opinion, the eRecovery is completely useless., because it simply doesn't work. Maybe you can also try to flash the RECOVERY.img on the eRecovery partition (it should be called recovery2), but I'm not sure it is possible to do it on our phone. Then, you can try to install the full update through the official recovery. However, those images don't seem to be very helpful.
EDIT:
Some progresses have been made since the last time I checked, see this thread. Another possibility is to try some stock ROMs from other phones with similar specs (e.g. Honor 4X/5X), but probably it doesn't work.

Nrin said:
I didn't understand really well what happened. Did you successful install the TWRP? can you put here the download link? What did you do to brick your phone?
As you have already discovered there isn't enough "modding" on our phone (I have the same model). As far as I know the Honor 6A's stock rom is not published on internet yet. The only methods that I know to obtain the rom are: ask to Huawei/Honor for it (I've tried to contact them, but they didn't reply) or dump it using a custom recovery.
I dumped an official update, it is for the model DLI-L22 and you can download it following this link (size: ~400MB). The update contains several files, in particular there is the update.app archive that you can open with this tool, the files inside update.app are the following:
Code:
ABOOT.img CMNLIB64.img ERECOVERY.img MODEM.img SBL1.img
AMSS_VER.img CMNLIB.img GPT.img MSADP.img SHA256RSA.img
AMSS_VERLIST.img CRC.img KEYMASTER.img PACKAGE_TYPE.img TZ.img
APDP.img DEVCFG.img LKSECAPP.img RECOVERY.img
BOOT.img DSP.img MDTP.img RPM.img
It seems to contain the original recovery and other stuff that maybe can help you. Please pay attention, because it is not the full rom, it is just an incremental update, for example SYSTEM.img and USERDATA.img are missing.
The best solution is that someone with the TWRP makes a dump of the official rom, unfortunately I have still the stock rom and I'm not sure to install the TWRP. The reason is because I don't want to lose the official updates, so you should wait for some other user with the same phone that shares the rom.
Maybe you can try to flash some of the component from the update that I've dumped, but it is risky.
In my opinion, the eRecovery is completely useless., because it simply doesn't work. Maybe you can also try to flash the RECOVERY.img on the eRecovery partition (it should be called recovery2), but I'm not sure it is possible to do it on our phone. Then, you can try to install the full update through the official recovery. However, those images don't seem to be very helpful.
EDIT:
Some progresses have been made since the last time I checked, see this thread. Another possibility is to try some stock ROMs from other phones with similar specs (e.g. Honor 4X/5X), but probably it doesn't work.
Click to expand...
Click to collapse
le firmware intégrale pour le Huawei Honor 6A DLI-L22 se trouve a cette adresse
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2094/g1650/v120299/f1/full/update.zip (thanks www.4pda.ru)
the complete firmware for the Huawei Honor 6A DLI-L22 is located at this address
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2094/g1650/v120299/f1/full/update.zip (thanks on 4pda.ru)

Unbrick Huawei P10 Plus Oreo

Greetings all,
I have a Huawei P10 Plus and have updated to Oreo VKY-L29C432B360 and everything worked just fine. Previously it was on VKY-L29C432B170.
Then I updated it to VKY-L29C432B365 and now I have issues.
I can't power up my phone, it is as if my battery doesn't charge and after a while (with the USB cable plugged in), I get to this screen:
Error Mode
Attention!!
Please update system again
Error!!
Func NO : 11 (recovery image)
Error No : 2 (load failed)
I can fastboot (power and volume down), but can't update using HWOTA as I'm on Oreo. Tried different recoveries without any luck.
Any help will be appreciated.
Regards

reivilo2018 said:
Greetings all, I have a Huawei P10 Plus and have updated to Oreo VKY-L29C432B360 and everything worked just fine. Previously it was on VKY-L29C432B170...
Click to expand...
Click to collapse
I don't have this device but, the following area of the forum is specific to your device.
https://forum.xda-developers.com/p10-plus
With that stated...
You should be able to obtain some member guidance within the following thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3702237
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.

update.zip
Will it work if I have the 3 update zip files (VKY-L29C4342B360) and extract it using "HuaweiUpdateExtractor"?
If yes, what *.img files to I need to flash and what should the commands be to flash these *.img files.
Based on older ROMS (like Nougat), below are the commands to flash, but it is not working as I'm on Oreo.
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cust cust.img
fastboot flash system system.img

Honor Mate SE No Recovery

I have a Huawei Honor Mate SE. I unlocked the bootloader, flashed TWRP, Magisk. Had everything great. I wanted to remove TWRP to update my phone. After I tried to flash stock recovery, I keep getting this error in fastboot:
func no 11 (recovery image)
error no 2 (load failed)
I had twrp working last night, but now everytime I flash recovery, it boots into that error menu. I tried flashing recovery_ramdisk, recovery_vbmeta and recovery_vendor all with stock img files. Anyone have any ideas? My phone will boot up normally and will work great, just can't update it and can't boot into recovery. Am I missing a partition to flash? Also I did try HiSuite and my phone is not compatible even though I backed up my phone with that program.
I also did try the dload method and it gets stuck at 5%. And last night when I did get recovery working, it wouldn't download from the server, just keeps getting error, and now I cannot even get to recovery

jbear4525 said:
I have a Huawei Honor Mate SE..........
Click to expand...
Click to collapse
I don't have this device but, you should be able to obtain some member guidance within one of the following threads that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3775922
https://forum.xda-developers.com/showthread.php?t=3763714
https://forum.xda-developers.com/showthread.php?t=3801625
https://forum.xda-developers.com/showthread.php?t=3767216
Good Luck!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my SM-G900V device.

Can't do anything - need help!

After updating TWRP using TWRP it self i can't boot into custom recovery again the phone just stays loading forever, the phone is also wiped so no custom image or stock image and i cant use it since even in fastboot it just keeps saying "FAILED (remote: Command not allowed)".
The phone on FASTBOOT mode says:
Phone unlocked
but says FRP lock
maybe that is the problem? if so how can i solve it? i really want to make my honor 8 work again so thanks for your help!
Ps. Sorry for my bad English

RicardoVs said:
After updating TWRP using TWRP it self i can't boot into custom recovery again the phone just stays loading forever, the phone is also wiped so no custom image or stock image and i cant use it since even in fastboot it just keeps saying "FAILED (remote: Command not allowed)".
The phone on FASTBOOT mode says:
Phone unlocked
but says FRP lock
maybe that is the problem? if so how can i solve it? i really want to make my honor 8 work again so thanks for your help!
Ps. Sorry for my bad English
Click to expand...
Click to collapse
What android version are you on? Have you tried flashing stock recovery? Which twrp are you using? Are sure that you did not flash twrp on the wrong partition?

PremiumBlaze said:
What android version are you on? Have you tried flashing stock recovery? Which twrp are you using? Are sure that you did not flash twrp on the wrong partition?
Click to expand...
Click to collapse
I was using Paranoid android 7.1 i believe but i wiped the phone so there is no Android at all at the moment, i tried updating to the latest twrp since i was getting error 7 trying to flash the stock room, stock recovery just says "failed to get information from the server" every time and for last i did flash it in the right partition, every comand i execute in fastboot it gives me that error and it's also important to mention that i can't find my phone in "adb devices" only in "fastboot devices". I saw some people using the Dload get the stock system back maybe thats an option? i dont know i feel completely lost.
Thanks for the reply

RicardoVs said:
I was using Paranoid android 7.1 i believe but i wiped the phone so there is no Android at all at the moment, i tried updating to the latest twrp since i was getting error 7 trying to flash the stock room, stock recovery just says "failed to get information from the server" every time and for last i did flash it in the right partition, every comand i execute in fastboot it gives me that error and it's also important to mention that i can't find my phone in "adb devices" only in "fastboot devices". I saw some people using the Dload get the stock system back maybe thats an option? i dont know i feel completely lost.
Thanks for the reply
Click to expand...
Click to collapse
Are you able to boot inside TWRP at this moment? And also what is this "latest twrp" that you said that your were flashing. I believe if the TWRP stays loading forever, it means that it does not work for the device.
Make sure your trying to flash this TWRP for nougat:
https://forum.xda-developers.com/honor-8/development/twrp-t3566563/amp/

PremiumBlaze said:
Are you able to boot inside TWRP at this moment? And also what is this "latest twrp" that you said that your were flashing. I believe if the TWRP stays loading forever, it means that it does not work for the device.
Make sure your trying to flash this TWRP for nougat:
https://forum.xda-developers.com/honor-8/development/twrp-t3566563/amp/
Click to expand...
Click to collapse
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery twrp-3.1.1-1-frd.img
target reported max download size of 471859200 bytes
sending 'recovery' (25188 KB)...
OKAY [ 0.538s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.546s

RicardoVs said:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery twrp-3.1.1-1-frd.img
target reported max download size of 471859200 bytes
sending 'recovery' (25188 KB)...
OKAY [ 0.538s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.546s
Click to expand...
Click to collapse
Have you tried dload yet?

PremiumBlaze said:
Have you tried dload yet?
Click to expand...
Click to collapse
No, what do I need to do? What files should I put in the Dload folder? I never used that method and didn't manage to find information online

RicardoVs said:
No, what do I need to do? What files should I put in the Dload folder? I never used that method and didn't manage to find information online
Click to expand...
Click to collapse
1. Download the update.zip of the stock rom
2. Extract the update.zip of the stock rom
3. Make a folder named "dload" on your sdcard
4. Place the UPDATE.APP on the dload folder
5. Press volume up + volume down + power button until Huawei logo appears

PremiumBlaze said:
1. Download the update.zip of the stock rom
2. Extract the update.zip of the stock rom
3. Make a folder named "dload" on your sdcard
4. Place the UPDATE.APP on the dload folder
5. Press volume up + volume down + power button until Huawei logo appears
Click to expand...
Click to collapse
Ok, i already had the files so i did everything and it didnt work "Software install failed!"

RicardoVs said:
Ok, i already had the files so i did everything and it didnt work "Software install failed!"
Click to expand...
Click to collapse
In the old nougat days, Ive had the same problem. As I always say, dont use twrp on honor 8. They all suck! Anyways, did you tried eRecovery?
Or you should be able to dload a proper firmware in all cases. You just need to find the right package. It fixed me the same problem in the past.

Braiteyy said:
In the old nougat days, Ive had the same problem. As I always say, dont use twrp on honor 8. They all suck! Anyways, did you tried eRecovery?
Or you should be able to dload a proper firmware in all cases. You just need to find the right package. It fixed me the same problem in the past.
Click to expand...
Click to collapse
I got the update.zip for my specific FRD device but still... it failed... im starting to think there is no way so fix this

RicardoVs said:
I got the update.zip for my specific FRD device but still... it failed... im starting to think there is no way so fix this
Click to expand...
Click to collapse
Dont loose hope man! There is a way to fix it every time. Just try another full ota package with same vendor as you are running rn.

Braiteyy said:
Dont loose hope man! There is a way to fix it every time. Just try another full ota package with same vendor as you are running rn.
Click to expand...
Click to collapse
I tried every single file for my FRD-L09C432B405 on Team mt and nothing :/
Do i need to delete everything on the sd card and leave only de dload folder? Maybe i need to format it in an specific format?

No, you dont need to format your sd card. I am gonna help you tomorrow. I am going to sleep rn. See you! need to format it in an specific format?[/QUOTE]

RicardoVs said:
I tried every single file for my FRD-L09C432B405 on Team mt and nothing :/
Do i need to delete everything on the sd card and leave only de dload folder? Maybe i need to format it in an specific format?
Click to expand...
Click to collapse
I realised you said that you updated your TWRP and you cant get in. Did you tried different buttons? I remember some of twrps had volume up + power button and some had volume down and power button and some had vol up and down and power button. Try everything. The frp lock is probably because it somehow disabled oem unlocking by itself. I am gonna try to find a link for latest nougat for you. Good luck man!
EDIT: You should try to relock yor bootloader and unlock it again.
Here are the links: http://update.dbankcdn.com/TDS/data/files/p3/s15/G1774/g1755/v208402/f1/full/update.zip
http://update.dbankcdn.com/TDS/data...l/FRD-L09_hw_eu/update_full_FRD-L09_hw_eu.zip
http://update.dbankcdn.com/TDS/data...02/f1/full/public/update_data_full_public.zip

RicardoVs said:
I tried every single file for my FRD-L09C432B405 on Team mt and nothing :/
Do i need to delete everything on the sd card and leave only de dload folder? Maybe i need to format it in an specific format?
Click to expand...
Click to collapse
Could you try to follow this guide to see if it works:
https://www.stechguide.com/downgrade-honor-8-from-nougat-to-marshmallow/
It may lead your to marshmallow but hopefully it makes the device works. You are going to need the B131 update.zip and flashing rollback package (the site has rollback package download) using dload first before flashing the B131's update.app using dload.
So basically:
1. Flash the rollback package's update.app using dload
2. Flash update.app from B131's update.zip using dload
Once your in marshmallow, you can go back to nougat because there should be at least a twrp for honor 8 marshmallow somewhere around xda

PremiumBlaze said:
Could you try to follow this guide to see if it works:
https://www.stechguide.com/downgrade-honor-8-from-nougat-to-marshmallow/
It may lead your to marshmallow but hopefully it makes the device works. You are going to need the B131 update.zip and flashing rollback package (the site has rollback package download) using dload first before flashing the B131's update.app using dload.
I am really sure that this would work because I tried it before and I was able to go to Marshmallow without any software install fails using dload.
So basically:
1. Flash the rollback package's update.app using dload
2. Flash update.app from B131's update.zip using dload
Once your in marshmallow, you can go back to nougat because there should be at least a twrp for honor 8 marshmallow somewhere around xda
Click to expand...
Click to collapse
The rollback package worked but not the B131, i tried to flash the update.app for my android the B405 as well but nothing...

RicardoVs said:
The rollback package worked but not the B131, i tried to flash the update.app for my android the B405 as well but nothing...
Click to expand...
Click to collapse
I thought this is gonna happen. It happened to me too. I just dont ****in remmember how did I make dload work.

delete