I just tried to put cwm recovery on my inew i2000 ,
following the steps on a spanish forum(htcmania). All went well untill I wanted to boot into cwm recovery , power+ volume up is not working.
The phone just boots into android after a few minutes as if there is no recovery
image. Even adb reboot recovery does not work.
I noticed that the recovery was for the i2000 on android 4.1
mine tells android 4.2.2. Could it be a wrong cwm recovery not working on this
firmware?
All methods to root this phone fail.
Any suggestions? How to get the stock recovery back?
Hello everyone,
I have Micromax A110 canvas 2, or the cynus t2 phone.
I recently rooted my phone, and sucessifuly instaled LegoIce Fusion V3 custom rom and CWM recovery.
It worked perfectly for like 3 weeks.
Yesterday i changed my screen lock pattern, and shut down a phone to check out something in recovery mode.
I pressed volume +,- and power button, pressed volume up for recovery mode when i got promted, just like always, but this time android image appeared and looks like formatted my phone.
Phone didnt get into recovery mode, but instead it restarted and booted back into android. What i saw than is that
all my apps were deleted.
I tried to restart phone again, but this time it just stucked on booting.
Only logo appears, but one thing i think is important to mention is that now it shows stock boot logo "ANDROID" and it should show "SAMSUNG" logo as i instaled custom rom.
I tried couple more times to boot into android, but i failed. Than i decided to boot into recovery mode, but when i press Volume +,- and power button and pres volume up for recovey my phone just restarts and tries to boot in android.
So right now i can't access android, nor i can access recovery mode to flash rom again.
I ran out of ideas, so any advice will be appreciated.
Nikola99603 said:
Hello everyone,
I have Micromax A110 canvas 2, or the cynus t2 phone.
I recently rooted my phone, and sucessifuly instaled LegoIce Fusion V3 custom rom and CWM recovery.
It worked perfectly for like 3 weeks.
Yesterday i changed my screen lock pattern, and shut down a phone to check out something in recovery mode.
I pressed volume +,- and power button, pressed volume up for recovery mode when i got promted, just like always, but this time android image appeared and looks like formatted my phone.
Phone didnt get into recovery mode, but instead it restarted and booted back into android. What i saw than is that
all my apps were deleted.
I tried to restart phone again, but this time it just stucked on booting.
Only logo appears, but one thing i think is important to mention is that now it shows stock boot logo "ANDROID" and it should show "SAMSUNG" logo as i instaled custom rom.
I tried couple more times to boot into android, but i failed. Than i decided to boot into recovery mode, but when i press Volume +,- and power button and pres volume up for recovey my phone just restarts and tries to boot in android.
So right now i can't access android, nor i can access recovery mode to flash rom again.
I ran out of ideas, so any advice will be appreciated.
Click to expand...
Click to collapse
1st .
if you have computer use sp tool flashing ....you can flash CWM via SPtool which requires computer .....i think this will going to reset your recovery mode ....then you can flash rom in your mobile ..
2nd .
you can directly flash rom via sptool . there are so many tutorials available regarding a110 device on xda . only choose your device you will get all available contents regarding your device ..
I
Nikola99603 said:
Hello everyone,
I have Micromax A110 canvas 2, or the cynus t2 phone.
I recently rooted my phone, and sucessifuly instaled LegoIce Fusion V3 custom rom and CWM recovery.
It worked perfectly for like 3 weeks.
Yesterday i changed my screen lock pattern, and shut down a phone to check out something in recovery mode.
I pressed volume +,- and power button, pressed volume up for recovery mode when i got promted, just like always, but this time android image appeared and looks like formatted my phone.
Phone didnt get into recovery mode, but instead it restarted and booted back into android. What i saw than is that
all my apps were deleted.
I tried to restart phone again, but this time it just stucked on booting.
Only logo appears, but one thing i think is important to mention is that now it shows stock boot logo "ANDROID" and it should show "SAMSUNG" logo as i instaled custom rom.
I tried couple more times to boot into android, but i failed. Than i decided to boot into recovery mode, but when i press Volume +,- and power button and pres volume up for recovey my phone just restarts and tries to boot in android.
So right now i can't access android, nor i can access recovery mode to flash rom again.
I ran out of ideas, so any advice will be appreciated.
Click to expand...
Click to collapse
Help me same issue facing tried to reflash cwmr by sp flash tools then also not able to access recovery installed ib phoneix v4 working very well but need to update one patch.
Sent from my A110 using XDA Free mobile app
unable to boot in recovery mode in micromax a110
kindly check thread
http://forum.xda-developers.com/showthread.php?t=2201689&page=2
pls help my lenovo s860 can't finish flash using sp flash tool
the reason my phone lenovo s860 got bricked is because I've installed too many xposed module, I rebooted it right after the installation and then it went boot loop
So I tried to format it using Recovery Rom but it went lag and it stuck there, so I pressed the volume up and down and the power button again to escape from lag but after the format The phone is stuck at the recovery mode even though I pressed reboot or power off.
Now I tried to Flash it using Sp flash tool (latest version) but I forgot to press the "format and download" instead I pressed the "download" right away with its stock Rom (also I forgot to press the checksum in the download options) and the installation continued but it did not went 100% but it is stucked at 25% or 24%
Now my phone just displays The lenovo logo with "Dl tool failed! " below
Pls help me (sa mga pro dyan)
I cant get it to fastboot
I've flashed custom recovery but it makes the screen all black when I turn it on
I also flashed it in sp flash tool the old version 3.13 something and still only 25%
PLS PLS PLS HELP ME
It's worth trying Lenovo's Smart Assistant. This is an official PC suite that looks like it can flash the latest stock rom onto your phone for you. You'll find it here: http://lenovomobilesupport.lenovo.com/gb/en/products/Phones/S-Series/S860-Smartphone/downloads/DS101291
I personally don't have a Lenovo phone but I've used Sony's PC software to fix similar problems to yours before now.
This will mean that your phone won't be rooted but at least it will work and you can then root it and reinstall what you need.
Let me know if this helps!
So i got this phoen the other day and noticed the pre installed rom is taking up to many resources, so i decided to try and root the phone and install a custom rom, after the phone rebooted from using Kingo Root It got stuck in an infinite boot loop.
Phone just restarts over and over again, i help Power and Volume Up, this takes me to the boot loader screen and i selected recovery, now i jhad twrp installed and naturally assumed that it would go into recovery mode, Well it didnt and now i am stuck with a phone that just either restarts or sits in fastboot mode when i put it into it.
Any suggestions, to be honest i cant find any stock rom for it, this is the only phone i have and i need it.
Go to the official website and download upgrade tool .. it will identify the phone then downloads the firmware and u get ur stock ROM
I have a samsung galaxy s3 model sgh-i747 I installed a twrp custom reovery w/ a custom rom OCT n os. I recently wanted to install a new cutom rom. the current twrp version installed was higher than the cutom rom version so i decided to get a lower version of twrp so i used flashify the app to flash the twrp img file and i rebooted but it rebooted to download mode and it only boots to download mode. in download mode it says could not do normal boot. i tried everything like taking the battery out and then pressing the power button to boot. The samsung logo would be gone in about 0.3 seconds and then it just gose back to the same result to download mode. Someone tell me how to fix this. I'm desperate PLZ HELP!