hi dear friends
thanks for all who support members
I have mate 9 pro
LON-L29C185B180
when get stock recovery enter erecovery the I used dc phoneix to fix it by stock firmware cost 15€
after this my device fully unrooted frp lock stock recovery but bootloader relock how can I change it to lock please I need your support
.
i try to used dc-unlocker for this steps but the choice not available like thier description like com port and some drivers
see the post for steps
How to lock Huawei bootloader (from RELOCKED to LOCKED)
please help
thanks again to all
You could've done it for free. Anyway. Update using Firmware finder to B180 or use the flash update thread in guides, updating will lock bootloader.
dear ante0 thanks for replay, I will be fine if pay I used dc phoneix to right update.app but not lock. I found thread to flash firmware but only for chinese devices can you please help by llink for this guide?
You could've done it for free. Anyway. Update using Firmware finder to B180 or use the flash update thread in guides, updating will lock bootloader.
Click to expand...
Click to collapse
Dear ante0
thanks a lot
I used firmware finder and it was difficult to use in the beginning to setup settings. after that every things going smoothly. now the bootloader is locked
Dear ante0
thanks a lot
I used firmware finder and it was difficult to use in the beginning to setup settings. after that every things going smoothly. now the bootloader is locked.
after flash fully firmware bootloader become locked and device boot was very fast not like before
You can use Mate_8_rayglobe_knife for relocked to locke again.
Thanks my friend already done
Hi,
I have a single sim MATE 9 MHA-L09
I was on NRD90M Test Keys Built, so wanted to flash stock firmware
so in order to get stock tried changing OEM info to c432(my previous built) using HWOTA (Update.bat)
i don't know what went wrong, on computer it says SUCCESS but checked it in HUAWEI MULTI TOOL
it shows
Found Phone : MHA-L09
Model : Huawei phone in fastboot mode
Serial NR. : UGM0217216001969
Firmware : NRD90M test-keys
Now am unable to recover using dload( Gives error at 5% )
No luck using HuaweiUpdateExtracter and HuaweiMultiTool as it ask to unlock my bootloader
Don't want to use FUNKYHUAWEI as it charges money and does not guarantee UNBRICK.
Phone is stuck on erecovery which shows update using wifi but doesn't detect anything end up with reboot and shutdown.
IS there any way i could be able to get product id so that i can unlock bootloader and proceed with flashing?
Any other way to recover my phone?
need help plz...... step by step........ :crying::crying::crying::crying:
Any help would be much appreciated
Thank You in advance.
send it to warranty ,happened to me, now my phone is hard bricked not working no power nothing. I sent it back to service shop they say motherboard problem. It is under warranty i hope they will fix it.I told them that I was surfing and that suddenly it turned off.
Szilard666 said:
send it to warranty ,happened to me, now my phone is hard bricked not working no power nothing. I sent it back to service shop they say motherboard problem. It is under warranty i hope they will fix it.I told them that I was surfing and that suddenly it turned off.
Click to expand...
Click to collapse
Its turning on but no OS.and i don't have any receipt for claiming warranty.
happened to me too,so many times bootloped then motherboard fried. I sent it to service centre.
Szilard666 said:
happened to me too,so many times bootloped then motherboard fried. I sent it to service centre.
Click to expand...
Click to collapse
For me it happend for the first time, previously i was able to unlock bootloader and root the device i was having a custom rom...then i wanted to return to stock and noticed that bootloder got locked in the process but no os only solution i can see is by dload method, i even have huawei p9 which has a rollback package which easily fix all problem but am unable to find any roll back package for mate 9, i live this device i spent nearly one day to fix it unfortunately dload didn't work for me...i have all the firmwaee downloaded and fetched stock img but it didn't helped as now i have a locked bootloader......i need any alternative way to find my product id to unlock bootloader and can flash firware easily.
Shadymind said:
Hi,
I have a single sim MATE 9 MHA-L09
I was on NRD90M Test Keys Built, so wanted to flash stock firmware
so in order to get stock tried changing OEM info to c432(my previous built) using HWOTA (Update.bat)
i don't know what went wrong, on computer it says SUCCESS but checked it in HUAWEI MULTI TOOL
it shows
Found Phone : MHA-L09
Model : Huawei phone in fastboot mode
Serial NR. : UGM0217216001969
Firmware : NRD90M test-keys
Now am unable to recover using dload( Gives error at 5% )
No luck using HuaweiUpdateExtracter and HuaweiMultiTool as it ask to unlock my bootloader
Don't want to use FUNKYHUAWEI as it charges money and does not guarantee UNBRICK.
Phone is stuck on erecovery which shows update using wifi but doesn't detect anything end up with reboot and shutdown.
IS there any way i could be able to get product id so that i can unlock bootloader and proceed with flashing?
Any other way to recover my phone?
need help plz...... step by step........ :crying::crying::crying::crying:
Any help would be much appreciated
Thank You in advance.
Click to expand...
Click to collapse
If you are sure about whether your partitions are set up for Android N or Android O and use the correct update.app file, FHUnbrickFlashTool will get it booting again for you. The lack of guarantee is because a percentage of people use the wrong update.app file, and destroy their phones in the process.
If you rebrand you need to flash firmware twice in HWOTA. First select "rebrand", after this you need to unlock bootloader again and run HWOTA, but select "same brand update".
ante0 said:
If you rebrand you need to flash firmware twice in HWOTA. First select "rebrand", after this you need to unlock bootloader again and run HWOTA, but select "same brand update".
Click to expand...
Click to collapse
This is the correct way.
Shadymind said:
Hi,
I have a single sim MATE 9 MHA-L09
I was on NRD90M Test Keys Built, so wanted to flash stock firmware
so in order to get stock tried changing OEM info to c432(my previous built) using HWOTA (Update.bat)
i don't know what went wrong, on computer it says SUCCESS but checked it in HUAWEI MULTI TOOL
it shows
Found Phone : MHA-L09
Model : Huawei phone in fastboot mode
Serial NR. : UGM0217216001969
Firmware : NRD90M test-keys
Now am unable to recover using dload( Gives error at 5% )
No luck using HuaweiUpdateExtracter and HuaweiMultiTool as it ask to unlock my bootloader
Don't want to use FUNKYHUAWEI as it charges money and does not guarantee UNBRICK.
Phone is stuck on erecovery which shows update using wifi but doesn't detect anything end up with reboot and shutdown.
IS there any way i could be able to get product id so that i can unlock bootloader and proceed with flashing?
Any other way to recover my phone?
need help plz...... step by step........ :crying::crying::crying::crying:
Any help would be much appreciated
Thank You in advance.
Click to expand...
Click to collapse
You can use this tool: https://forum.xda-developers.com/p9/help/how-to-product-id-bricked-p9-t3561156
Direct link to tool: http://rootjunkysdl.com/files/?dir=Huawei P8 Lite (Download Huawei Product ID Generator.exe)
Follow instructions in first link. I have tested and it generates a valid Product ID, I even tested on huaweis site to get my unlock code (which matches the one I get using my own Product ID)
Just make sure you follow instructions.
Edit: To get serial no, just boot to fastboot and use cmd to enter command fastboot devices
the number to the left is your serial no.
In my case:
C:\Windows\System32>fastboot devices
AHK0217111000149 fastboot
AHK0217111000149 is my serial no.
Edit 2: Oh, you had serial no already. I'll leave it in case anyone else finds this.
ante0 said:
You can use this tool: https://forum.xda-developers.com/p9/help/how-to-product-id-bricked-p9-t3561156
Direct link to tool: http://rootjunkysdl.com/files/?dir=Huawei P8 Lite (Download Huawei Product ID Generator.exe)
Follow instructions in first link. I have tested and it generates a valid Product ID, I even tested on huaweis site to get my unlock code (which matches the one I get using my own Product ID)
Just make sure you follow instructions.
Edit: To get serial no, just boot to fastboot and use cmd to enter command fastboot devices
the number to the left is your serial no.
In my case:
C:\Windows\System32>fastboot devices
AHK0217111000149 fastboot
AHK0217111000149 is my serial no.
Edit 2: Oh, you had serial no already. I'll leave it in case anyone else finds this.
Click to expand...
Click to collapse
Hi thanks for your reply,
I have all the information IMEI, Sno, but am unable to get product id:crying::crying: in order to unlock boot loader
in fastboot CMD it says its already bootloader unlocked but unable to flash twrp or boot up the device.
Is there any way to get product id except dialer method?
Shadymind said:
Hi thanks for your reply,
I have all the information IMEI, Sno, but am unable to get product id:crying::crying: in order to unlock boot loader
in fastboot CMD it says its already bootloader unlocked but unable to flash twrp or boot up the device.
Is there any way to get product id except dialer method?
Click to expand...
Click to collapse
Are you selecting Huawei Y300-0100 in the generator? It doesn't work with any other model. And then you have to select "before emui 5" on the emui website and select phone as Y300-0100.
And try both IMEI.
If youre willing you could PM me your IMEI later and I'll try. I'm at work but home in about 6-7 hours.
If CMD states ur bootloader is already unlocked, u could be flashing to the wrong partition.. Are u using android N or O. Android O uses the updated twrp version so u will need to flash that version to the correct partition then u be able to boot to twrp and load ur OS
redhotneo said:
If CMD states ur bootloader is already unlocked, u could be flashing to the wrong partition.. Are u using android N or O. Android O uses the updated twrp version so u will need to flash that version to the correct partition then u be able to boot to twrp and load ur OS
Click to expand...
Click to collapse
I've experienced it saying it's unlocked, but it's actually not. Have to fastboot oem relock xxxxxx
Then fastboot oem unlock xxxxxx
Xxxxx= password.
But one would need their unlock code for this.
ante0 said:
Are you selecting Huawei Y300-0100 in the generator? It doesn't work with any other model. And then you have to select "before emui 5" on the emui website and select phone as Y300-0100.
And try both IMEI.
If youre willing you could PM me your IMEI later and I'll try. I'm at work but home in about 6-7 hours.
Click to expand...
Click to collapse
Hi thanks for your message, my imei is 861956030103197
Shadymind said:
Hi thanks for your message, my imei is - snip-
Click to expand...
Click to collapse
Hmm. That's the one I tried from your other thread. Do you still have the mate 9 box? Could you check Serial number on it?
I read somewhere that the serial number fastboot shows might not always be correct.
Shadymind said:
Hi thanks for your message, my imei is kldfghdsfklghfdghdfskl
Click to expand...
Click to collapse
you have to get into TWRP , make a back up of the OEM infos (on ur sdcard) then download the correct c432 oem infos , copy then to replace previous saved oem from twrp you ve done earlier ... then run htwoa and - if not enough - do the way as suggested by Ante0 (twice hwota / change brand for 432 then same brand)
ante0 said:
If you rebrand you need to flash firmware twice in HWOTA. First select "rebrand", after this you need to unlock bootloader again and run HWOTA, but select "same brand update".
Click to expand...
Click to collapse
Shadymind said:
Hi thanks for your reply,
I have all the information IMEI, Sno, but am unable to get product id:crying::crying: in order to unlock boot loader
in fastboot CMD it says its already bootloader unlocked but unable to flash twrp or boot up the device.
Is there any way to get product id except dialer method?
Click to expand...
Click to collapse
https://imei24.com/ give you product ID. just paste it your IMEI number.
Good Morning. I have a Huawei H60-L01 with IMEI: 357143044689435. Android has been damaged and I can not now reset the system because I have the bootloader blocked ... I ask if someone can help me with the bootloader unlock code to get my repair telephone. Thank you in advance.
Don't publish IMEI on the internet. It can be used inappropriately by some nasty people.
Hi guys .... I have gone through many threads on unlocking the bootloader but it failed.
I have a nokia 3 device...... here are some of the information,AFTER flashing using sp tool with the option of "formart all+ download"
Hardware:mt6735
Board:mt6737
CPU ABI:arm64-v8a
Manufacturer:hmd global
Model:ta-1020
Android Ver:7.0
bootloader ver:unknown
USB config:mtp,mass_storage,adb
User:foxconn
FS:unknown
Baseband ver:moly.lr9.w1444.md.lwtg.mp.v110.5.p44, 2017/07/26 16:23
Build number:00ww_1_47i
ID:nrd90m
Region:us
Language:en
Chipset:mt6737m
Root: Not Root
The bootloader was locked again and I lost both IMEI no.(Invalid imei) and original serial no,(current serial no.123456789ABCDEF).
I have tried different ways and tools to restore original serial no. and imei no. but all unsuccessfull.
I have also tried different ways from this forum on how to unlock the bootloader but it has also failed(bootloader cant be unlocked)
(Before flashing i had unlocked the bootloader)
With a locked bootloader i can't root the phone
Iam wishing for any help from you guys on what i should do now... iwant to root the phone
Unlocking Bootloader fail (TA-1020)
Annan Denis said:
Hi guys .... I have gone through many threads on unlocking the bootloader but it failed.
I have a nokia 3 device...... here are some of the information,AFTER flashing using sp tool with the option of "formart all+ download"
Hardware:mt6735
Board:mt6737
CPU ABI:arm64-v8a
Manufacturer:hmd global
Model:ta-1020
Android Ver:7.0
bootloader ver:unknown
USB config:mtp,mass_storage,adb
User:foxconn
FS:unknown
Baseband ver:moly.lr9.w1444.md.lwtg.mp.v110.5.p44, 2017/07/26 16:23
Build number:00ww_1_47i
ID:nrd90m
Region:us
Language:en
Chipset:mt6737m
Root: Not Root
The bootloader was locked again and I lost both IMEI no.(Invalid imei) and original serial no,(current serial no.123456789ABCDEF).
I have tried different ways and tools to restore original serial no. and imei no. but all unsuccessfull.
I have also tried different ways from this forum on how to unlock the bootloader but it has also failed(bootloader cant be unlocked)
(Before flashing i had unlocked the bootloader)
With a locked bootloader i can't root the phone
Iam wishing for any help from you guys on what i should do now... iwant to root the phone
Click to expand...
Click to collapse
The same thing is happening to me but my bootloader has been unlocked before. I re-locked it because I unchecked developer options. Now that I want to root my device and require my bootloader open, the button to check and uncheck is dark grey and is refusing to check the option.
PLEASE GIVE ADVICE/HELP.
Is there any updates in this topic?
I've been struggling with this problem since a week now, my phone is working, but I don't have original IMEIs, SN, and I locked my bootloader again by accident. Now I can't unlock it, it says: Unlock failed...
Is there any solution for this?
Or any other methods for unlocking the bootloader apart from the regular methods (fastboot oem unlock, fastboot flashing unlock etc.)?
gurtnyi said:
Is there any updates in this topic?
I've been struggling with this problem since a week now, my phone is working, but I don't have original IMEIs, SN, and I locked my bootloader again by accident. Now I can't unlock it, it says: Unlock failed...
Is there any solution for this?
Or any other methods for unlocking the bootloader apart from the regular methods (fastboot oem unlock, fastboot flashing unlock etc.)?
Click to expand...
Click to collapse
May be we can try! PM me.
Fortunately, I've solved it by reflashing proinfo, and other partitions. It was quite a long time ago, so I don't really remember it, but I managed to solve it after a few days/weeks of struggling.
gurtnyi said:
Fortunately, I've solved it by reflashing proinfo, and other partitions. It was quite a long time ago, so I don't really remember it, but I managed to solve it after a few days/weeks of struggling.
Click to expand...
Click to collapse
Great. If you need any help for your Nokia device you can comment down below this post.
phone its stuck in huawei com 1
dc unlocker can flash all00c00b175, after reset phone its black and stuck in test point.
board software from support can be flashed, give me some eror
SN:UBV7N183070xxxx
IMEI:86030304730xxxx
IMEI1:86030304740xxxx
MEID:A00000955Bxxxx
Build number: :EML-AL00 8.1.0.175(C00)
Model: EML-AL00
Battery state: 4259mv
OEM lock state info:
FB LockState: UNLOCKED
USER LockState: LOCKED
OEM get bootinfo:
unlocked
Not worked
Hello friend, could you solve your problem? I bought several softward boards and none worked