Hello guys,
I recently found out my phone doesn't take pictures anymore. The "fotocamera" (the name the default app has on italian settings) app works until I press the "take picture" button and nothing happens. I'm unable to take video too. I also tried Snap Camera and it doesn't work. I tried taking a picture while in watsap and the screen turned green and no picture was saved. I also tried the test camera and with both front and rear camera the picture is green.
I unlocked the phone and rooted it with "XperiFIX". Than I installed Magisk v14.x and kept updating to the latest (v15.2). The phone was working fine and I could take pictures and video with no problem until a couple of weeks ago.
Is there a way to just install the DRM FIX? Do you know how to fix this?
Xperia XZ Premium, G8141, Android 8.0.0, Build 47.1.A.3.254
Thanks for your help
If you look into the installation folder of Xperifix, just get the files from the firmware and flash them in TWRP.
AlmostDarkslide said:
Hello guys,
I recently found out my phone doesn't take pictures anymore. The "fotocamera" (the name the default app has on italian settings) app works until I press the "take picture" button and nothing happens. I'm unable to take video too. I also tried Snap Camera and it doesn't work. I tried taking a picture while in watsap and the screen turned green and no picture was saved. I also tried the test camera and with both front and rear camera the picture is green.
I unlocked the phone and rooted it with "XperiFIX". Than I installed Magisk v14.x and kept updating to the latest (v15.2). The phone was working fine and I could take pictures and video with no problem until a couple of weeks ago.
Is there a way to just install the DRM FIX? Do you know how to fix this?
Xperia XZ Premium, G8141, Android 8.0.0, Build 47.1.A.3.254
Thanks for your help
Click to expand...
Click to collapse
Flash magisk 14.5 (included in XperiFix)
iArvee said:
If you look into the installation folder of Xperifix, just get the files from the firmware and flash them in TWRP.
Click to expand...
Click to collapse
I flashed drmpatch.zip from xperifix's folder but it didn't fix the problem.
Doom Slayer said:
Flash magisk 14.5 (included in XperiFix)
Click to expand...
Click to collapse
Do I have to uninstall 15.2 before flashing 14.5 or I can directly flash it over 15.2? XperiFix has two oreo folders, "oreo" and "oreo2", can you confirm I need to use the files in the "oreo" folder for 47.1.A.3.254? (the files are probably the same but I prefer asking).
Once flashed 14.5, should I update it or just keep this version?
Thanks to you both
Uninstall root completely, install magisk 14.5.
You can update app for now, but don't update root itself to 15.2 for now. I think it's gonna be fixed in later releases.
Grab it from the latest available rom folder in Xperifix.
No need to flash drmfix or kernel if you already did so.
Hope this helps.
AlmostDarkslide said:
I flashed drmpatch.zip from xperifix's folder but it didn't fix the problem.
Do I have to uninstall 15.2 before flashing 14.5 or I can directly flash it over 15.2? XperiFix has two oreo folders, "oreo" and "oreo2", can you confirm I need to use the files in the "oreo" folder for 47.1.A.3.254? (the files are probably the same but I prefer asking).
Once flashed 14.5, should I update it or just keep this version?
Thanks to you both
Click to expand...
Click to collapse
Doom Slayer said:
Uninstall root completely, install magisk 14.5.
You can update app for now, but don't update root itself to 15.2 for now. I think it's gonna be fixed in later releases.
Grab it from the latest available rom folder in Xperifix.
No need to flash drmfix or kernel if you already did so.
Hope this helps.
Click to expand...
Click to collapse
Actually you can just flash it without uninstalling (at least in my experience it works fine).
Also, the latest magisk (15.2) works fine. Just download it from the Magisk forum (also here on XDA).
Good luck!
Reason not to root devices. They become unstable
Hello guys, here I am with some news about my problem.
I downloaded the magisk uninstaller zip and flashed via TWRP, then i installed magisk 14.5. I now am able to take pictures in any app. Problem solved.
Now I have another problem The phone is rebooting unexpectedly two or three times a day, often while watching youtube+3.5+root.apk, a couple of time while in idle. Do you know what I should do to fix this problem now?
Do you also have an idea why my backup always stops at 50% on google and on sd? I'm getting scared of loosing everything and I can't even do a backup!
iArvee said:
If you look into the installation folder of Xperifix, just get the files from the firmware and flash them in TWRP.
Click to expand...
Click to collapse
Doom Slayer said:
Flash magisk 14.5 (included in XperiFix)
Click to expand...
Click to collapse
Doom Slayer said:
Uninstall root completely, install magisk 14.5.
You can update app for now, but don't update root itself to 15.2 for now. I think it's gonna be fixed in later releases.
Grab it from the latest available rom folder in Xperifix.
No need to flash drmfix or kernel if you already did so.
Hope this helps.
Click to expand...
Click to collapse
iArvee said:
Actually you can just flash it without uninstalling (at least in my experience it works fine).
Also, the latest magisk (15.2) works fine. Just download it from the Magisk forum (also here on XDA).
Good luck!
Click to expand...
Click to collapse
Hello again, several new updates about my phone situation.
I confirm magisk 15.2 makes my camera unusable. I will wait v15.3 or above before updating to latest version.
I'm now at 14.3 because it's the only one I have found, does anybody have working links to 14.5 and above so I can test them?
I had to reinstall the phone so till now no unexpected reboot.
Thanks again guys!
AlmostDarkslide said:
Hello guys,
I recently found out my phone doesn't take pictures anymore. The "fotocamera" (the name the default app has on italian settings) app works until I press the "take picture" button and nothing happens. I'm unable to take video too. I also tried Snap Camera and it doesn't work. I tried taking a picture while in watsap and the screen turned green and no picture was saved. I also tried the test camera and with both front and rear camera the picture is green.
I unlocked the phone and rooted it with "XperiFIX". Than I installed Magisk v14.x and kept updating to the latest (v15.2). The phone was working fine and I could take pictures and video with no problem until a couple of weeks ago.
Is there a way to just install the DRM FIX? Do you know how to fix this?
Xperia XZ Premium, G8141, Android 8.0.0, Build 47.1.A.3.254
Thanks for your help
Click to expand...
Click to collapse
Use xperifix of @sToRm//
hey I installed the xperifix on my xz premium and I flashed it with magis 14.5 but the camera still doesn't work. if i reset with emma I only can took a green picture. what have I do know to get my camera working again? I need to do a complete uninstall and doing a system flash or? but How can i do it thanks
Castiglionais said:
Use xperifix of @sToRm//
Click to expand...
Click to collapse
20 euro +19% vat
Fun Stuff.
Related
Looks like 5.1.1 is real and the Nexus Player is the first to get it. Factory image has been posted and I assume an OTA will be following shortly.
https://developers.google.com/android/nexus/images#fugu
Flashed and still can't cast to the damn thing without the FPS and motion being crap in the video
Wonder if there are any (significant) fixes for NP. I haven't really got any problems with mine so 5.1.1 doesn't sound very tempting for NP. For N5 on the other hand..
Edit: One problem btw, when casting the whole screen from our Nexus 5's, there sometimes isn't any sound. Reboot of NP workarounds this problem.
Konstigt said:
Wonder if there are any (significant) fixes for NP. I haven't really got any problems with mine so 5.1.1 doesn't sound very tempting for NP. For N5 on the other hand..
Click to expand...
Click to collapse
Do you have any issues with casting to it from the likes of showbox etc? ive tried so many different versions of apps to cast and they all produce the same issues with the NP that is not on the chromecast
One new change I noticed is they renamed Notifications to "Customize Recommendations" and put a new UI for it under the "Home Screen" settings. It makes since as calling them Notifications was quite confusing.
Roxas598 said:
Do you have any issues with casting to it from the likes of showbox etc? ive tried so many different versions of apps to cast and they all produce the same issues with the NP that is not on the chromecast
Click to expand...
Click to collapse
Actually no, I used to have problems but after 5.1 + some Google Cast Receiver update all my apps that I cast from works fine. I do not use Showbox.
Konstigt said:
Actually no, I used to have problems but after 5.1 + some Google Cast Receiver update all my apps that I cast from works fine. I do not use Showbox.
Click to expand...
Click to collapse
Ugh i'd love to know what's wrong with mine
Is Chainfire's root method still working on the Android v5.1.1 update?
Konstigt said:
Actually no, I used to have problems but after 5.1 + some Google Cast Receiver update all my apps that I cast from works fine. I do not use Showbox.
Click to expand...
Click to collapse
Same experience here. Before the 5.1 + cast receiver update, I couldn't even cast a tab from my chrome browser. Post update, things work great. Kind of scared to do another update....
GabbyWC said:
Is Chainfire's root method still working on the Android v5.1.1 update?
Click to expand...
Click to collapse
Im curious as well. Im having some trouble getting it to update the SU binary, and root only works in adb Shell at the moment
Edit - Nvm, it's working correctly
Chainfire's method not working
ittakesnoguts said:
Im curious as well. Im having some trouble getting it to update the SU binary, and root only works in adb Shell at the moment
Edit - Nvm, it's working correctly
Click to expand...
Click to collapse
Hey, I flashed the 5.1.1 factory image and tried Chainfire's root method (booting the root.img through fastboot), but SuperSU won't show up/or get installed. Did you do it the same way or can you take me through the steps?
suhelbrar said:
Hey, I flashed the 5.1.1 factory image and tried Chainfire's root method (booting the root.img through fastboot), but SuperSU won't show up/or get installed. Did you do it the same way or can you take me through the steps?
Click to expand...
Click to collapse
What I did was after using Chainfire's method, I installed SuperSU from the Play Store. Afterwards I booted with root.img one more time because it wasn't granting superuser and now it works.
I still cant update the binaries tho as this for some reason causes a boot loop. It might just be that I didn't wipe.
ittakesnoguts said:
What I did was after using Chainfire's method, I installed SuperSU from the Play Store. Afterwards I booted with root.img one more time because it wasn't granting superuser and now it works.
I still cant update the binaries tho as this for some reason causes a boot loop. It might just be that I didn't wipe.
Click to expand...
Click to collapse
I just saw the same thing--can boot with the root.img, but updating binaries stays stuck at the spinning dots. Root does work, however.
Wipeout said:
I just saw the same thing--can boot with the root.img, but updating binaries stays stuck at the spinning dots. Root does work, however.
Click to expand...
Click to collapse
In case you still need it I got it working by installing adbd insecure then manually pushing SuperSU.apk to /system/apps and the binary to /system/xbin
Are the folks running rooted 5.1.1 still having issues with Material Design apps that use 3-dots menus on the top taskbar of the app? If running Titanium Backup, can you use the batch function on the top taskbar?
I received the update and Hulu no longer works smh
SupaDupaFly24 said:
I received the update and Hulu no longer works smh
Click to expand...
Click to collapse
FWIW I don't have 5.1.1 yet (still on 5.1) and Hulu is broken for me too.
From what I read u need the webview update for hulu to work
Regarding rooting problems on 5.1.1
I fixed this problem with rooting 5.1.1 last week in my Android Toolkit *HERE*. The problem with SuperSU not showing in the Apps bar is fixed if you adb install the Superuser.apk file that was used to root. If you have already rooted and have installed the Toolkit you can go to section 19 from the Main Menu and select the Superuser fix (option1) to extract the Superuser.apk and adb install it. Android 5.1.1 is also fully supported with download/flash/root available.
I did post in Chainfires support thread to let him know about the 5.1.1 rooting problem but I guess he has been away on a well deserved break.
Mark.
5.1.1 and trying to use http://download.chainfire.eu/631/CF-R
As mentioned I installed SuperSU from the Play Store after booting the root.img. It tries to install but then fails. Upon reboot it stays stuck at the boot animation. Only way out is a fresh restore/re-booting the root.img. Any ideas?
Hi.
Today appeared fw CLT-L29C432B131.
I have updated with hurupdater method.
So far they have included camera improvements.
The zoom button is places at lower screen part, they changed the circle into square.
More impressions After testing.
CLT-L29C432B131 Camera
Screenshot
Well, that's definitely new!
tamaskurti said:
Hi.
Today appeared fw CLT-L29C432B131.
I have updated with hurupdater method.
So far they have included camera improvements.
The zoom button is places át lower screen part, they changed the circld into square.
More impressions After testing.
CLT-L29C432B131 Camera
Click to expand...
Click to collapse
Thanks as you know you might be the First one with the NEW rom 131 so we all need your thoughts especialy about camera, daylight photos oversharpines....Most of users saying that daylight photos are good but most of the times HDR makes them unnatural with oversharpines effect with AI on or off....
What do you think about that after update???
Whats the changelog given? I already have 131 on my india model out of the box...want to compare the changelog with mine
halleyrokz said:
Whats the changelog given? I already have 131 on my india model out of the box...want to compare the changelog with mine
Click to expand...
Click to collapse
From FirmwareFinder:
This update optimizes system performance and stability.
Optimizes power consumption for longer usage.
Improves system performance and stability for smoother operations.
Optimizes the wallpaper display for a better experience.
Fixes an issue where the other party's voice was occasionally delayed when answering calls while using OK Google.
1. This update will not erase your personal data, but we recommend that you back up any important data before updating.
2. The system will restart after the update. This will take about 5 minutes.
3. If you experience any issues during the update, please call the Huawei customer service hotline or visit an authorized Huawei service center for assistance.
tsiglas said:
Thanks as you know you might be the First one with the NEW rom 131 so we all need your thoughts especialy about camera, daylight photos oversharpines....Most of users saying that daylight photos are good but most of the times HDR makes them unnatural with oversharpines effect with AI on or off....
What do you think about that after update???
Click to expand...
Click to collapse
OK. Sure.
But it will take time.
I'm not a professional shooter, so basically I probably won't notice the differences too fast.
One thing I have observed is that the portrait selfie mode was improved, it's more natural.
Others I will test.
But again: with HuRupdater you can update easely.
(downloading 3 of 4 files from update packages: the choice is between clt-l09 and clt-l29, after that renaming and flash via twrp. See corresponding thread)
Interesting.. so it seems indeed that many of the under the hood changes are not always mentioned in the change log.
Yeah please keep us posted on the camera improvements and performance and power consumption.
tamaskurti said:
Hi.
Today appeared fw CLT-L29C432B131.
I have updated with hurupdater method.
So far they have included camera improvements.
The zoom button is places at lower screen part, they changed the circle into square.
More impressions After testing.
CLT-L29C432B131 Camera
Screenshot
Click to expand...
Click to collapse
I updated it to it yesterday but besides the zoom button form nothing changed the selfie camera still creey as before and the video recording also no stabilisation for 4k and no 60 f0s for 4k, huawei is doing nothing
tamaskurti said:
So far they have included camera improvements.
Click to expand...
Click to collapse
How about the front-camera, can you turn off beauty mode? i set it to 0 but still on almost the same.
I've just tried to update using the HuRUpdater method but wasn't able to boot afterwards. Tried flashing twice but it just wouldn't boot to system. I've restored the TWRP backup I made before flashing and got back into system, now settings says I'm on .131 but I can't be if I just restored a .128 backup, right?
What's everyone's update method? Did you place custom recovery in the folder too or flash without? Wipe cache/dalvik after? Boot to system first before flashing Magisk or just flash directly after HuRUpdater script?
Want to try again but just wanted to check if I've missed something? Thanks!
just flashed with hurupdater, no problems at all, had to reflash twrp and magisk though... i guess the real improvement are the june security patches
kaiowas82 said:
just flashed with hurupdater, no problems at all, had to reflash twrp and magisk though... i guess the real improvement are the june security patches
Click to expand...
Click to collapse
Reckon it would be safe to flash using the NoCheck Recovery method?
danifilth4king said:
Reckon it would be safe to flash using the NoCheck Recovery method?
Click to expand...
Click to collapse
i don't know mate, i used hurupdater, as i said before, and all went smooth...
kaiowas82 said:
i don't know mate, i used hurupdater, as i said before, and all went smooth...
Click to expand...
Click to collapse
Did you use official or unofficial TWRP?
You need to use unofficial twrp as only that one can decrypt storage (remove security settings first: no pin/ fingerprint).
danifilth4king said:
Did you use official or unofficial TWRP?
Click to expand...
Click to collapse
unofficial
kaiowas82 said:
unofficial
Click to expand...
Click to collapse
Tried re-downloading the firmware and flashing again without including TWRP in the flashing process and still got bootloop! I just can't figure out why it's not working. I'm tempted to try to update using NoCheck Recovery but that's how I bricked last time, so I'm apprehensive :/
danifilth4king said:
Tried re-downloading the firmware and flashing again without including TWRP in the flashing process and still got bootloop! I just can't figure out why it's not working. I'm tempted to try to update using NoCheck Recovery but that's how I bricked last time, so I'm apprehensive :/
Click to expand...
Click to collapse
I created a new folder with inside the hurupdater script and the three zips downloaded from firmware finder, no recovery img or else.
flashed the script, wiped cache and dalvik and rebooted straight to system.
rebooted to fastboot to reflash the praetoriano recovery, reboot to recovery to flash magisk and that's it.
I'm afraid i cannot help further
I see here P20 Pro users get new update 131, but just with FunkyHuawei and TWRP manual. No one gets updated from OTA. And if you looking the Huawei offical (in China) forum, they still didnt release new updates. So is this a beta updated from FunkyHuawei or how did they get it?
isko01 said:
I see here P20 Pro users get new update 131, but just with FunkyHuawei and TWRP manual. No one gets updated from OTA. And if you looking the Huawei offical (in China) forum, they still didnt release new updates. So is this a beta updated from FunkyHuawei or how did they get it?
Click to expand...
Click to collapse
The cn firmware was updated too to version B123.
Remember, they have different numbers. Ex. Their B123 version is newer than our B131.
Look at production numbers in Fw.
I install 270 firmware and apply drm camera fix patch, but camera doesn't work, focus stopped working, I press the button to take a photo and a gray round focus icon appears and the camera freezes and nothing happens....
pls help
upd. rolled back now to 75 firmware and apply drm pacth and camera now works
Which drm fix did you use? I used Janjan's and had the same problem. Later on I found out the procedure I used was not correct.
This was the correct procedure I used and worked.
1. flash boot.img in part one, reboot to twrp
2. flash 2-patching and 3-Magisk, reboot into system
3. install 4-kernel-permissive in Magisk as a Magisk module, reboot.
4. it was fine.
Thanks to this person SXS-Groovemaster there in Janjan's patch page 51 #508.
xueyaotianxia said:
Which drm fix did you use? I used Janjan's and had the same problem. Later on I found out the procedure I used was not correct.
This was the correct procedure I used and worked.
1. flash boot.img in part one, reboot to twrp
2. flash 2-patching and 3-Magisk, reboot into system
3. install 4-kernel-permissive in Magisk as a Magisk module, reboot.
4. it was fine.
Thanks to this person SXS-Groovemaster there in Janjan's patch page 51 #508.
Click to expand...
Click to collapse
i used procedure what you write right now but camera doesn't work
1. You download files from 1st page janjan topic? or from page 49 post #479 ?
2. And you flash boot.img only once? and only 1 boot.img file from only 1 archive ?
3. and you flash boot.img by adb?
NAerop said:
i used procedure what you write right now but camera doesn't work
You download files from 1st page janjan topic? or from page 49 post #479 ?
Click to expand...
Click to collapse
from the 1st page. The first time I had problem, I wiped completely and flashed 270 firmware again by using newflasher, and the I used the steps above. It worked. If it is still not working maybe go back to 235, anyway Pie is coming in November...I don't see any difference between 235 and 270 anyways...
xueyaotianxia said:
from the 1st page. The first time I had problem, I wiped completely and flashed 270 firmware again by using newflasher, and the I used the steps above. It worked. If it is still not working maybe go back to 235, anyway Pie is coming in November...I don't see any difference between 235 and 270 anyways...
Click to expand...
Click to collapse
i used 75 firmware and i go back to 75 and use drm patch and camera work, but in 270 doesn't((
and if i have problems with 270 i though i will have problems with Pie...
anyway i did everything you said and on the step nember 2 i rebot and start load system but then my smart reboot themself and only then load system, then instal module in magisk but camera does'nt work......
xueyaotianxia said:
.
Click to expand...
Click to collapse
interesting thing it's that when i was on 75 firmware and have installed Storm's drm fix camera works good and everything was good i was on 75 looong time, but few days ago i just run camera and focus doesn't work and camera freez and why??? i don't know......
same camera problem when i install 270 firmware....
but when i flash 75 firmware and use drm patch camera again works good......
interesting right?
NAerop said:
interesting thing it's that when i was on 75 firmware and have installed Storm's drm fix camera works good and everything was good i was on 75 looong time, but few days ago i just run camera and focus doesn't work and camera freez and why??? i don't know......
same camera problem when i install 270 firmware....
but when i flash 75 firmware and use drm patch camera again works good......
interesting right?
Click to expand...
Click to collapse
Have you cleared data and cache of the camera on 75? Might be something you installed that caused the problem? Did you boot into safe mode after having problem on 75 and tried the camera? If it worked then must be something that you installed.
Youtube is dead now on this tablet keeps asking to update and no updates available.
Need newer android version i guess.
What options do i have?
slybunda said:
Youtube is dead now on this tablet keeps asking to update and no updates available.
Need newer android version i guess.
What options do i have?
Click to expand...
Click to collapse
Maybe uninstall and then newly re-install youtube app.
Alternatively you can clear app data.
Good luck!
slybunda said:
Youtube is dead now on this tablet keeps asking to update and no updates available.
Need newer android version i guess.
What options do i have?
Click to expand...
Click to collapse
If you are using the stock rom then yeah that could be the case. If not then you might want to reinstall your custom rom or youtube itself. alternately if reinstalling both did not fix it you can still use youtube via a browser and directly go to the youtube website.
yes stock rom. youtube works in browser but is really slow. need app based version since tablet is now with my dad. need to get newer rom on it so it can run something like livenettv.
managed to sort this. youtube vanced v13.50 is working fine.
i thought this tablet was running kitkat 4.4.2 but turns out its jelly bean 4.2.2. thats why iv been getting the wrong apps that dont install on it.
vanced 13.50 runs considerably better than newpipe which doesnt even load up some episodes.
now if only livenettv would work then i wouldnt need to mess about this tablet anymore.
That didnt last long. Got issue with youtube vanced now. Error 400. Looks like im gonna have to get a newer android build on this tablet.
Anyone know whats best for my needs? Need android 6 or newer depending on whats more stable. Tablet is only to be used for YouTube and if possible livenettv.
this is now sorted again lol.
iv flashed twrp then flashed the omni 6.01 rom. no gapps installed and its doing both youtube vanced and livenettv perfect. far faster than before too.
looks like iv got life back in this tablet.
incase anyone wants to know. its a very simple process.
used latest odin and flashed twrp 2.8.5 then had a sd card with the omni6.0.1 rom and twrp3.1.1.0.
once odin flashes trwp 2.8.5, booted to twrp recovery and updated it to the 3.1.1.0 version using img file.
rebooted back to recovery, flashed the omni rom. rebooted again and it went straight into android.
setup wifi and installed youtube vanced and livenettv from sd card apk files and job done.
slybunda said:
this is now sorted again lol.
iv flashed twrp then flashed the omni 6.01 rom. no gapps installed and its doing both youtube vanced and livenettv perfect. far faster than before too.
looks like iv got life back in this tablet.
incase anyone wants to know. its a very simple process.
used latest odin and flashed twrp 2.8.5 then had a sd card with the omni6.0.1 rom and twrp3.1.1.0.
once odin flashes trwp 2.8.5, booted to twrp recovery and updated it to the 3.1.1.0 version using img file.
rebooted back to recovery, flashed the omni rom. rebooted again and it went straight into android.
setup wifi and installed youtube vanced and livenettv from sd card apk files and job done.
Click to expand...
Click to collapse
Do you have links?
IcemanSR said:
Do you have links?
Click to expand...
Click to collapse
Which links ????
IcemanSR said:
Do you have links?
Click to expand...
Click to collapse
what links you after? everything is in this thread.
slybunda said:
what links you after? everything is in this thread.
Click to expand...
Click to collapse
I think its either a mistake or he wants ROM links ?
Arc android said:
Which links ????
Click to expand...
Click to collapse
nvm i figured it out. My problem was that Andi's topic contained
Downloads:
[#DLGITHUBIO]
??
I have no idea what is that suppose to be. So googled my way into his http://andi34.github.io/ then my way back into xda
IcemanSR said:
nvm i figured it out. My problem was that Andi's topic contained
Downloads:
[#DLGITHUBIO]
??
I have no idea what is that suppose to be. So googled my way into his http://andi34.github.io/ then my way back into xda
Click to expand...
Click to collapse
I think that's becoz the ROM was discontinued ?????
Arc android said:
I think that's becoz the ROM was discontinued ?????
Click to expand...
Click to collapse
????
So have the all others. Rename topic title to discontinued, lock topic if u must. But delete links? No logic.
And on top all, you come with all??? And ask what links? Quote: everything is in this thread.
why is no one discussing stable android 11 for op7p ? got my update round 3 a.m. this morning. been searching all day for a working twrp since the stable android 11 been released. no luck though......
Hi,
Today I installed the update manually and my phone keeps flashing the TWRP load-screen at boot. It's stuck now. Is that because there is no compatible TWRP version yet? How do I fix this?? Any idea?
There is no working TWRP yet for Android 11. You'll need to flash the stock boot.img or rooted boot.img from one of the threads in the news, guides section.
Edit: TWRP screen flashing is because it's incompatible. I had the same issue on the open betas.
Have the exact same issue as above, Twrp screen flashing, cannot boot back to normal even with adb... anybody has a rooted boot.img link that knows works with Android 11?
Should have checked on xda first *slaps his face*
Always check xda first *slaps his face again*
EDIT: For other poor saps with this issue use this -> https://www.androidfilehost.com/?fid=2188818919693770594 I didnt managed to get booted with rooted img but the original boot img file worked well ... at least I got a phone now...
im on 10.3.8 and rooted..
can i just do the same old process.. twrp isnt an issue as long as may apps are safe and root..
santiagoruel13 said:
im on 10.3.8 and rooted..
can i just do the same old process.. twrp isnt an issue as long as may apps are safe and root..
Click to expand...
Click to collapse
No, its not the same process.... For me for example I couldnt get wifi to actually work on rooted image AND you lose the ability to do backups via TWRP..... Refer here for the latest on this: https://forum.xda-developers.com/t/...p-recovery-for-oneplus-7-pro.3931322/page-153
dejjem said:
No, its not the same process.... For me for example I couldnt get wifi to actually work on rooted image AND you lose the ability to do backups via TWRP..... Refer here for the latest on this: https://forum.xda-developers.com/t/...p-recovery-for-oneplus-7-pro.3931322/page-153
Click to expand...
Click to collapse
I mean.. same steps.. that ive used so far amd retain its root.
1. Download rom via o2 updater
2. Flash it via local update
3. Install magisk to inactive slot
4. Reboot.
So if i do this.. wifi wont work??? Is that it???
Finished updating my phone..after downloading it for about 2 hours.
And im quite satisfied with the results. No problems whatsoever..
Glad for you... You probably had already removed the encryption on your mobile... from what I'm reading that is the main incompatibility issue with TWRP...
FWIW after playing around for a day, I had to revert everything Phone wifi was weird (weirder with root and all mods disabled) and system was a little unstable in some 3p apps and there seems to be some bugs with the phone screen 60/90 refresh... Gonna wait a bit to update again.
dejjem said:
Glad for you... You probably had already removed the encryption on your mobile... from what I'm reading that is the main incompatibility issue with TWRP...
FWIW after playing around for a day, I had to revert everything Phone wifi was weird (weirder with root and all mods disabled) and system was a little unstable in some 3p apps and there seems to be some bugs with the phone screen 60/90 refresh... Gonna wait a bit to update again.
Click to expand...
Click to collapse
i dont mind not having TWRP for the meantime,, i just used TWRP previously for flashing CUSTOM kernels.. hehehehe.
anyways, what problem have you encountered regarding wifi?? i dont seem to experience those,, maybe because i came from stable oos 10.3.8..
what app crashed and problems have you encountered???