Database Info

Seicane Android 9 won't update time after turn off engine

Hello all I need help!
Just bought a seicane H286 MTCE_HF_V3.07_1 9" android 9 everything looks good except for the clock. everytime I turn off the engine and the time is 2:15pm, when I turn the engine back on 30mins or however long later the clock is starting at 2:15pm and counting. I toggled update time with GPS on/off, I toggled update with carrier on/off but nothing work. The only time it's update the time with GPS is when I reset the unit. really frustrating with tech support they keep insisting that the unit is automatically update time with gps! If anyone have any solution please help. thank you.

Yes, this is a known issue, search forums for details on update or contact reseller for support/update.

hello, even my autoradio (wondefoo) rh3368 mtce_cz, cpu octacore cortex-a53 @ 1.5 android 9 has your same problem ... surely there is a software bug, the seller told me that he will send me an update. .. ps to the most expert: is it possible to downgrade from android 9 to 8 without risking ?

ilfn143 said:
Hello all I need help!
Just bought a seicane H286 MTCE_HF_V3.07_1 9" android 9 everything looks good except for the clock. everytime I turn off the engine and the time is 2:15pm, when I turn the engine back on 30mins or however long later the clock is starting at 2:15pm and counting. I toggled update time with GPS on/off, I toggled update with carrier on/off but nothing work. The only time it's update the time with GPS is when I reset the unit. really frustrating with tech support they keep insisting that the unit is automatically update time with gps! If anyone have any solution please help. thank you.
Click to expand...
Click to collapse
I recently purchased a 10.1 Seicane H2038 rk3368 unit that seems to be using the same MTCE_HF_V3.07_1 firmware. I also had an issue with the time being incorrect when returning from sleep. I was able to correct the issue by updating the android OS to the latest available (in the Daisata updates thread) HA_px5_9.0_ota(20190521) - please note that that this performed a data reset when applying.
There appears to be a newer PX5 HA_px5_9.0_ota(20190528) firmware posted now that I have not tested, but I assume that should work as well:
https://forum.xda-developers.com/an...asaita-mcu-updates-rockchip-px5-octa-t3575155
I did not upgrade the MCU firmware.

If I know how to root it I can install clocksync and have it automatically sync the clock to gps signal

ilfn143 said:
If I know how to root it I can install clocksync and have it automatically sync the clock to gps signal
Click to expand...
Click to collapse
Or read the second post....

ilfn143 said:
Hello all I need help!
Just bought a seicane H286 MTCE_HF_V3.07_1 9" android 9 everything looks good except for the clock. everytime I turn off the engine and the time is 2:15pm, when I turn the engine back on 30mins or however long later the clock is starting at 2:15pm and counting. I toggled update time with GPS on/off, I toggled update with carrier on/off but nothing work. The only time it's update the time with GPS is when I reset the unit. really frustrating with tech support they keep insisting that the unit is automatically update time with gps! If anyone have any solution please help. thank you.
Click to expand...
Click to collapse
yesterday I installed the version ha_px5_9_ota and the problem of updating the timetable has been solved, the only problem is that as equalization power and audio volume is less than the original rom.

I solved it by rooting it and using tasker. What I found out was whenever I toggle location on and off the timeupdate to gps time, so I used tasker to toggle it.
First I rooted by using adb method found here: https://forum.xda-developers.com/an...5-mtcd-e-head-unit-discussion-thread-t3734189 (very helpful to watch the youtube video)
be sure to install hacker's keyboard from play store and use notepad++ on your pc. not sure why regular keyboard didn't work in terminal emulator. I had to root twice for it to work.
install tasker, in profile I set "Display State" to "on" so every time I turn on the car it'll run the task. In task I set it to wait 5 seconds, turn off location, wait a second and turn it back on.
go back to adb on pc and run command: adb shell pm grant net.dinglisch.android.taskerm android.permission.WRITE_SECURE_SETTINGS
that's it! now whenever I turn on the car it'll take a couple seconds to set the correct time.

hello, I have finished configuring everything and I must say that I am very satisfied with this version, if I can afford to give you some advice ... try installing it also because it seems better to receive gps satellites and do not need other applications to update the 'schedule.

My hu has Carplay built in and don’t want to risk it with a new rom

would it be the carplay?

mrt.angelo69 said:
would it be the carplay?
Click to expand...
Click to collapse
Apple Carplay

ilfn143 said:
First I rooted by using adb method found here: https://forum.xda-developers.com/an...5-mtcd-e-head-unit-discussion-thread-t3734189
Click to expand...
Click to collapse
Which method exactly?

kebul said:
Which method exactly?
Click to expand...
Click to collapse
Post #3

Any body have any version of mtce_hf plz

Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1Q9ns_Nojpl-8WAIvqgd0DMklUZJsjt7p/view?usp=drivesdk

I have a seicane radio in my ram truck, everything works well but I can't change the balance or fader, any ideas on how to correct this?
Sent from my VS996 using Tapatalk

moeduss said:
I have a seicane radio in my ram truck, everything works well but I can't change the balance or fader, any ideas on how to correct this?
Click to expand...
Click to collapse
What version of Android?

C75 said:
What version of Android?
Click to expand...
Click to collapse
Android 8
Sent from my VS996 using Tapatalk

moeduss said:
Android 8
Click to expand...
Click to collapse
Try installing this app on you HU and see if it works for you.
https://play.google.com/store/apps/details?id=jp.pioneer.mle.soundtune

Dasaita PX6

Ok,
So I got a on some recommendations here.
now what? Are there any custom roms I can use?

I would recommend read trough the forums...
And no, there are no modded Android 9 Roms at the moment.
You have to wait for Hal9k_ and Malaysk to come out with one when they are done.

LinkseD said:
I would recommend read trough the forums...
And no, there are no modded Android 9 Roms at the moment.
You have to wait for Hal9k_ and Malaysk to come out with one when they are done.
Click to expand...
Click to collapse
I've spent hours on the forums but there is so much out there its hard to get a handle on. the last unit I had was a nu3001 and was a bit more straight forward.
I'm not sure I care about android 9 if there is a ROM I can put on mine that is android 8 or whatever I don't care as long as it de-china-fied. I'll continue to look but was hoping for a quicker answer as I'm about to pull the trigger on buttoning up the car with wiring and dash....
Thanks!

Stormbringer! said:
I've spent hours on the forums but there is so much out there its hard to get a handle on. the last unit I had was a nu3001 and was a bit more straight forward.
I'm not sure I care about android 9 if there is a ROM I can put on mine that is android 8 or whatever I don't care as long as it de-china-fied. I'll continue to look but was hoping for a quicker answer as I'm about to pull the trigger on buttoning up the car with wiring and dash....
Thanks!
Click to expand...
Click to collapse
Your px6 came with android 9 anyway. There is no custom roms for px6 at the moment. With that said, android 9 is what I'm running (px5) and has been the most stable out of any modded ROM available from Hal9k or anyone else. You'll need to wait before a modded release is issued . They are being worked on.
For the time being, you could install FCC Launcher for A9. There's a thread in the forums here.
Sent from my SM-N920W8 using Tapatalk

Furthermore you could root your unit aswell. Even it is just possible by using SuperSu at the moment with Android 9.
Youll find the guides in the forums.

i have orderd one to, same as in first post.
can anyone say if tomtom or tomtom nds is working on this unit?

geldorf said:
i have orderd one to, same as in first post.
can anyone say if tomtom or tomtom nds is working on this unit?
Click to expand...
Click to collapse
I have the Dasita max6 as well, and can confirm: TomTom works perfectly.

S1W-brn said:
I have the Dasita max6 as well, and can confirm: TomTom works perfectly.
Click to expand...
Click to collapse
thanks.. yours is also px6 processor?

Yes, latest version px6

My Dasaita Px6 head unit has been working flawlessly for a little bit less than a month aside from a few disconnects with Android Auto.
However, today my head unit crashed 2x. Each time I heard a speaker popping distortion noise for a second and then the head unit restarted.
The only app that was running was Spotify with the unit connected to my phone's hot spot. Weather was about 60F so it wasn't a very hot day.
Has anyone encountered this before and if so, do you know what might be causing it?

rubberchickenmob said:
My Dasaita Px6 head unit has been working flawlessly for a little bit less than a month aside from a few disconnects with Android Auto.
However, today my head unit crashed 2x. Each time I heard a speaker popping distortion noise for a second and then the head unit restarted.
The only app that was running was Spotify with the unit connected to my phone's hot spot. Weather was about 60F so it wasn't a very hot day.
Has anyone encountered this before and if so, do you know what might be causing it?
Click to expand...
Click to collapse
could be a wiring issue or might need to factory reset the unit. I think everyone should factory reset as soon as they get the unit anyway.

lennylen said:
Your px6 came with android 9 anyway. There is no custom roms for px6 at the moment. With that said, android 9 is what I'm running (px5) and has been the most stable out of any modded ROM available from Hal9k or anyone else. You'll need to wait before a modded release is issued . They are being worked on.
For the time being, you could install FCC Launcher for A9. There's a thread in the forums here.
Sent from my SM-N920W8 using Tapatalk
Click to expand...
Click to collapse
I'm having the same issue and was blaming Malaysk mod for this...
Have you solved the issue? I will go back to stock and factory reset everything next week (is there a MCU factory reset option?).

I too have experienced the same exact problem and it happens once or twice a day. The UI freezes for a few seconds then there is a loud crackling sound coming from the speakers for another few seconds followed by a crash and reboot. It appears to happen randomly when I'm interacting with apps and more than likely is not heat related since it's been only a few degrees above freezing here and has happened only a few minutes after turning on my car. I've also had freezes where the UI and all buttons stop working but the radio keeps playing and only a forced reboot fixes it. I'm on Malaysk full mod and plan to go back to stock to do some troubleshooting and see if it's hardware or software-related.

jwallsuva said:
I too have experienced the same exact problem and it happens once or twice a day. The UI freezes for a few seconds then there is a loud crackling sound coming from the speakers for another few seconds followed by a crash and reboot. It appears to happen randomly when I'm interacting with apps and more than likely is not heat related since it's been only a few degrees above freezing here and has happened only a few minutes after turning on my car. I've also had freezes where the UI and all buttons stop working but the radio keeps playing and only a forced reboot fixes it. I'm on Malaysk full mod and plan to go back to stock to do some troubleshooting and see if it's hardware or software-related.
Click to expand...
Click to collapse
I tried going back to stock and changing many different MCU versions with the same exact issues you are describing: freezing or rebooting in the first few minutes after starting the car.
Today I had another new issue: I had one of the described freezes but after shutting down the car the display of Dasaita went black but the touch buttons remained on (LEDs on). I had to disassemble the HU to unplug the power cable... This is not a small bug anymore, this is a huge issue, I am trying to contact support with no answers. Did you find a solution or have any suggestion?
Do you have stock recovery? Do you know how to install stock recovery?
I also would like to factory reset MCU setting but I have no idea how to do it. Did you change any setting in factory settings menu? I'm worried that it could be something there.

The Android Attorney said:
could be a wiring issue or might need to factory reset the unit. I think everyone should factory reset as soon as they get the unit anyway.
Click to expand...
Click to collapse
I have the same issue sometimes my HU crashes with popping sound. I blame MCU 3.37 but i am not sure. Maybe i should re-update it without cfg settings files because i flashed it with exported MCU settings and put the cfg file next to the img file when i flashed the new MCU

matrixx1 said:
I have the same issue sometimes my HU crashes with popping sound. I blame MCU 3.37 but i am not sure. Maybe i should re-update it without cfg settings files because i flashed it with exported MCU settings and put the cfg file next to the img file when i flashed the new MCU
Click to expand...
Click to collapse
Where do you get the cfg file? I always flashed MCU without cfg file but maybe we could get a cfg file from a device with no issues and flash it alongside the MCU.

Frankk said:
Where do you get the cfg file? I always flashed MCU without cfg file but maybe we could get a cfg file from a device with no issues and flash it alongside the MCU.
Click to expand...
Click to collapse
You create it for your unit from factory config menu. Or document factory settings before updating MCU, right. Perhaps search for more info or read wiki.

marchnz said:
You create it for your unit from factory config menu. Or document factory settings before updating MCU, right. Perhaps search for more info or read wiki.
Click to expand...
Click to collapse
Thank you, I'm going to read it, but I assume that the cfg file you create from the factory settings menu is a backup of your current configuration, not a real clean factory configuration, am I right?

Frankk said:
Thank you, I'm going to read it, but I assume that the cfg file you create from the factory settings menu is a backup of your current configuration, not a real clean factory configuration, am I right?
Click to expand...
Click to collapse
Yes but actually the only thing i changed is SWC settings for Canbus so i can configure it manually.

matrixx1 said:
Yes but actually the only thing i changed is SWC settings for Canbus so i can configure it manually.
Click to expand...
Click to collapse
You have a Dasaita MAX6, right?
If yes, can you send me a dmcu.cfg file generated with your device?
If you changed only that setting it is pratically a stock configuration, I think I changed something more...
I'm not sure if it is the normal behaviour but when I update the MCU or if I wipe data from recovery or if I do a factory reset from system settings, the MCU settings are never changed. My custom configuration is never overwritten or deleted.
Thank you,
Francesco Comi

New issue: Wifi randomly turninf off (without USB beeing disconnected) - PX5 MTCD

Hi there,
despite the issue, that my radio in disconnecting USB (incl. Wifi, randomly, especially when it is colder) - which I tried to fix by replacing the USB chip to a GL852G - I now have a new issue since some days:
Now, my radio also disconnects Wi-Fi randomly without turning on again, while USB itself is not interuppted.
That issue is very new to me.
I installed a newer MCU some days ago (3.13 and 3.17) as this fixed an issue with the Bluetooth App automatically opening at the bottom of the screen when making a phone call.
I did not went back to the previous MCU yet (which was a 3.04 I think), as I don't think the issue is related to this. After MCU upgrade, I didn't have the above mentioned issue since more than a week.
Anyone having a similiar or same issue?
Maybe anony can confirm, MCU > 3.x having a wifi issue?
Thanks a lot!
Christian

Hi Christian,
I had the same issue. In the beginning I was able to compensate the issue with an automation app. (If WLAN turns off -> Turn on) After some time I couldn't activate the WLAN at all without restarting the radio. At some point, I could not do that anymore. Then I looked for a working LTE-Stick, but quickly understood that there is NO working 4G-Stick. Only a few UMTS sticks work. Via XDA-Developer found out that there are 4G sticks that are recognized as USB-to-Ethernet devices. Then I bought the HUAWEI E3372 LTE Surfstick. However, this does not work out-of-the-box with the radio. After a lot of manual work and learning-by-doing (installing an unofficial firmware), I managed to make it work now. The only disadvantage is that I no longer have a hotspot for other devices in the car.
Best regards,
Michael
gforums said:
Hi there,
despite the issue, that my radio in disconnecting USB (incl. Wifi, randomly, especially when it is colder) - which I tried to fix by replacing the USB chip to a GL852G - I now have a new issue since some days:
Now, my radio also disconnects Wi-Fi randomly without turning on again, while USB itself is not interuppted.
That issue is very new to me.
I installed a newer MCU some days ago (3.13 and 3.17) as this fixed an issue with the Bluetooth App automatically opening at the bottom of the screen when making a phone call.
I did not went back to the previous MCU yet (which was a 3.04 I think), as I don't think the issue is related to this. After MCU upgrade, I didn't have the above mentioned issue since more than a week.
Anyone having a similiar or same issue?
Maybe anony can confirm, MCU > 3.x having a wifi issue?
Thanks a lot!
Christian
Click to expand...
Click to collapse

Hi Michael,
Appreciate your answer, many thanks.
I am running hal9k ROM. If you have more detailed instructions, it works be great if you could share them with me.
Meanwhile I am trying to get a replacement device, as it is still under warranty and was bought in uk.
Thank you!
Christan
Weyoune85 said:
Hi Christian,
I had the same issue. In the beginning I was able to compensate the issue with an automation app. (If WLAN turns off -> Turn on) After some time I couldn't activate the WLAN at all without restarting the radio. At some point, I could not do that anymore. Then I looked for a working LTE-Stick, but quickly understood that there is NO working 4G-Stick. Only a few UMTS sticks work. Via XDA-Developer found out that there are 4G sticks that are recognized as USB-to-Ethernet devices. Then I bought the HUAWEI E3372 LTE Surfstick. However, this does not work out-of-the-box with the radio. After a lot of manual work and learning-by-doing (installing an unofficial firmware), I managed to make it work now. The only disadvantage is that I no longer have a hotspot for other devices in the car.
Best regards,
Michael
Click to expand...
Click to collapse

Weyoune85 said:
Then I bought the HUAWEI E3372 LTE Surfstick. However, this does not work out-of-the-box with the radio. After a lot of manual work and learning-by-doing (installing an unofficial firmware), I managed to make it work now. The only disadvantage is that I no longer have a hotspot for other devices in the car.
Best regards,
Michael
Click to expand...
Click to collapse
Fellow suffer as well.
Any chance of a link or hint of a guide to modify the E3372 stick?

Modifying E3372 was a tough stuff, actually. A lot of try-and-error. At one point I even thought to have bricked the stick.
Anyway, I got all information from following thread:
https://forum.xda-developers.com/an.../real-3g-4g-usb-modem-sticks-px5-px4-t3898344
On page 3, a link to a russian site is provided:
https://4pda.ru/forum/index.php?showtopic=883219&st=3620#entry66908061
I do not speak russian, so I used the DeepL Translator in order to translate everything.
To sum up, you need to install a modified webui und firmware which supports ethernet-over-usb (CDC) mode. The Versions I am using are:
E3272s-153_Update_22.491.09.00.00_M_AT_05.10
WebUI 17.100.17.00.143
https://www.lteforum.at/mobilfunk/firmware-versionen-hi-non-hilink-e3372h-inkl-mod.2691/ is a good source for downloading the files.
pky said:
Fellow suffer as well.
Any chance of a link or hint of a guide to modify the E3372 stick?
Click to expand...
Click to collapse

Weyoune85 said:
Modifying E3372 was a tough stuff, actually. A lot of try-and-error. At one point I even thought to have bricked the stick.
Anyway, I got all information from following thread:
https://forum.xda-developers.com/an.../real-3g-4g-usb-modem-sticks-px5-px4-t3898344
On page 3, a link to a russian site is provided:
https://4pda.ru/forum/index.php?showtopic=883219&st=3620#entry66908061
I do not speak russian, so I used the DeepL Translator in order to translate everything.
To sum up, you need to install a modified webui und firmware which supports ethernet-over-usb (CDC) mode. The Versions I am using are:
E3272s-153_Update_22.491.09.00.00_M_AT_05.10
WebUI 17.100.17.00.143
https://www.lteforum.at/mobilfunk/firmware-versionen-hi-non-hilink-e3372h-inkl-mod.2691/ is a good source for downloading the files.
Click to expand...
Click to collapse
Thank you very much for your reply. Will let you know how I get on.

Hello
I can't turn on wifi.. and usb hub stop working..*
This problem happened after restart factory*
Please help me

Android Auto + Android 10 = broken ?

Hi guys,
my android auto (in a certified compatible car AA) it's fully broken from Oneplus Android 10 versions.
Tried the beta3, beta4, and "official" android 10, always same problems.
Connections in not stable, sometimes audio glitch and interface (of my car) forced to reboot.
Almost always, the buttons from above interface disappear (in every app, like spotify, maps, waze, etc...) becoming fully unusable.
The vocal commands works only with navigator and music, no more google assistance questions (like what's the weather tomorrow) --> This seems confirmed that is broken in google side.
Now, I'm trying to understand if it's fully broken android 10 + android auto (the system AA level, not anymore an app to be lauched) OR it's only with these oxygen's roms, still broken in some way.
Please, someone have real feedbacks to give me ? I'm very disappointed, thinking to go back to Android 9 just for this, but i will loose every update (included the security monthly fix) because OPO is supporting already just Android 10.
What can I do ?
Tried all the throubleshoot I've found around of course, like wipe cache, delete app, use "new" AA interface, cables, etc...
Car: Mazda CX3 (it seems that Mazda + OPO7Pro is the devil match)

avid_droid said:
What I've learned from this phone and Android auto is that if you have USB debugging enabled, Android Auto will give you the worst experience.... EVER!
If you have it off, o don't know what to tell you honestly. If its on, TURN IT OFF! I have a 2017 Chevy RS Cruze and have no issues except when I have debugging enabled
Click to expand...
Click to collapse
Thanks for the tip, but unfortunately it was one of the things I've tried... Disabled the usb debug and also fully disable the dev. Mode...
BUT, are you on android 10 ? Really it's stable to you ?

Guys, some more feedbacks ?
My opo7pro with latest stable 10.0.2 it's still unstable with android auto (mazda).
Main selector icon disappear (becoming unusable), random crash/reboot, audio glitch...
Ufff

I've had my op7p for about a week. I have a Kenwood dmx 905 with wireless Android auto. Phone came with Android 9. Had no problems connecting without using the USB cord. Did the local update to Android 10. Now it won't connect unless I use the USB cord. Then I can disconnect the cord and go wireless. I have to do this every time now. Want to know to go back to Android 9.

m4ssnet said:
Guys, some more feedbacks ?
My opo7pro with latest stable 10.0.2 it's still unstable with android auto (mazda).
Main selector icon disappear (becoming unusable), random crash/reboot, audio glitch...
Ufff
Click to expand...
Click to collapse
Got the same with OOS in my Mazda. Switched to custom ROM, no more issues.

I can confirm the debugging issue making AA go weird. If I have it enabled it has a spastic, if I disable it, AA works flawlessly.

aoaleman said:
Got the same with OOS in my Mazda. Switched to custom ROM, no more issues.
Click to expand...
Click to collapse
man... I'm without hope
Really with custom's no problem at all ? I investigated more... I really think it's a problem also in Mazda side + OPO7Pro Android 10.
I didn't want this time go custom, I'm fully stock without root (for security reason etc...)
Ufff... very disappointed, 10.0.3 still has the same problem :crying:

Having huge problems with my 2016 Skoda Octavia Amundsen. I will try debugging mode off and report. Thx everybody.
-tapola
PS. As AA is not supported in Finland yet, how can I edit the power saving option of this App?

[Solved] - Help. After debrick, the rear view camera no longer works. PX5 MTCE_CHS_V3.67.1

Hi all of you.
I hope you can help me with this problem.
After debrick my unit, a seicane with android 10 - (MTCE_CHS_V3.67.1), Octa-Core Cortex [email protected] ghz, 4Gb Ram, specific for mini countryman R60, the rear view camera stopped working.
When I engage reverse gear, the screen turns black, but nothing is visible. For the rest, gps, bluetooth etc, all ok.
Android 9 is now mounted.
I don't think it's a wiring error because it always worked and the problem occurred after the debrick.
Thank you in advance for your suggestions.

if your screen turn to black it seems that the fuction of the camera is working... the signal you recieve from the its not something special. Just and old type of analog signal.. try to use an app which can open the video manually without the reverse year. Are you sure camera is working?

lagos911 said:
if your screen turn to black it seems that the fuction of the camera is working... the signal you recieve from the its not something special. Just and old type of analog signal.. try to use an app which can open the video manually without the reverse year. Are you sure camera is working?
Click to expand...
Click to collapse
Hi, thanks for your reply.
I agree perfectly with you. It is a hardware function that does not require any particular configuration. Unfortunately my car is a mini countryman. it is particularly long and complicated to disassemble to access the wiring.
I cannot rule out a wired malfunction but it seems very unlikely to me. the malfunction occurred when the radio was reset after the debrick.

IMHO : Check (re-write) your MTCE_CHS_V3.67.1, and, eventually upgrade !
LE : Unfortunately I don't see a higher version... (https://disk.yandex.com/d/umCvHqCDzHccr/MCU for MTCD, MTCE, MTCP, Intel Sofia3g/CHS)
Contact the seller !

fratellos said:
IMHO : Check (re-write) your MTCE_CHS_V3.67.1, and, eventually upgrade !
LE : Unfortunately I don't see a higher version... (https://disk.yandex.com/d/umCvHqCDzHccr/MCU for MTCD, MTCE, MTCP, Intel Sofia3g/CHS)
Contact the seller !
Click to expand...
Click to collapse
Ok. I had already thought about this solution, but I have not found V3.67.1
Can I install 3.57?

Pamigianleo62 said:
Ok. I had already thought about this solution, but I have not found V3.67.1
Can I install 3.57?
Click to expand...
Click to collapse
If the 3.57 is also CHS, you can install.

Ati_gangster said:
If the 3.57 is also CHS, you can install.
Click to expand...
Click to collapse
As I am inexperienced with these car radios and would like to avoid disasters, is the MCU common to many radio platforms?
MCU for MTCD, MTCE, MTCP, Intel Sofia3g

Hello everybody.
always concerning my problem I realized that in the factory settings (those protected by the pin) before the brick appeared a voice of the microphone, now it has disappeared. Is it possible to understand why this difference considering that it is a function of the MCU?
Thanks for your collaboration.

Have you installed the older MCU?

Thanks for the reply. Not yet.
I sent a request for assistance to Seicane, the manufacturer of my radio, asking for the firmware for a total reset.
Still no answer, unfortunately.
He waited a little longer and if they don't respond I will install the version you recommended.

I have teh same problem after debrick. Upgrade to Android 10 solved the problem for me, so it's problem with firmware.

hali8 said:
I have teh same problem after debrick. Upgrade to Android 10 solved the problem for me, so it's problem with firmware.
Click to expand...
Click to collapse
Wow fantastic.
I get active for this and let you know.
Could you please give me the link to proceed with the update?
Unfortunately I am not very experienced with android auto and I am always terrified of causing disasters.
Thanks in advance

hali8 said:
I have teh same problem after debrick. Upgrade to Android 10 solved the problem for me, so it's problem with firmware.
Click to expand...
Click to collapse
I solved.
As you indicated I have updated to android 10 and everything works.
Thanks