Hi, today I tried to root my s8+ G9550 but my frp is on can you tell me how to bypass it?
Did you enable Developer mode, and then inside Developer mode make sure OEM unlock is checked? Check mark ADB debugging while there too.
Related
Model: MAH-L09C432B156
EMU: 5.0
Android Ver: 7.0 NOT ROOTED!
No access to Devlepoer options for USB Debugging
Hi I have a Huawei Mate 9 which is FRP locked, I have gained the unlocking code from Huawei and have all relevent software and instructions to unlock Bootloader and remove the FRP protecton but I am really struggling with connecting the device in CMD with adb.
I have drivers installed and have allowed connections to phone with HiSuite on device and PC, I am unable to get into Developer settings due to FRP protection bur according to what I have seen in every walkthrough shows that this should not be a problem, even though I am unable to enabe USB debugging. Anyway I did have it connected once but have not been able to since so if anone can tell me where i might be going wrong I would be grateful.
After resetting phone and following instuctions via Huawei to prepare device I hold Vol- and plug in USB to Boot into Fastboot/Recovery mode.
Open CMD and execute Adb.exe in command, after that I enter command \adb devices which gets deamon running but showing no device.
I have tried going into what settings I am able to enter and enable USB in any way possible but still to no joy.
I have looked at posts on here but not found anything that seems to help as yet or I have just not looked in correct place.
Please can someone help as this is frustrating. Thanks Stew.
If you entered fastboot already try "fastboot devices" instead of adb
Did you go into about phone and tap the "build number" 7 times to enable developer options? If so you should be able to access and enable USB debugging
Sent from my MHA-AL00 using XDA-Developers Legacy app
" I have gained the unlocking code from Huawei "
please could you tell me how did you get that frp unlocking code from stupid Huawei?
they didn't answer my emails for one month now!
jr313 said:
Did you go into about phone and tap the "build number" 7 times to enable developer options? If so you should be able to access and enable USB debugging
Sent from my MHA-AL00 using XDA-Developers Legacy app
Click to expand...
Click to collapse
frp lock doesnt matter if you dont have oem unlock permission it wont help try using HWOTA with unlock code
i am in same boat since a month now and unable to bring the device back to life as i dont have usb debugging enabled and oem unlock permission and phone is bricked through huawei own official app and firmware
I have a problem with my device.
I can't enable the OEM unlocking.
When I m trying to do it it's asking me the pattern and that's it.
I can't enable it.
Any suggestions?
Turn the security off?.
Hi! to all
Here are details:
baseband version:A307FNXXU1ASHE
security patch:August 1,2019
in developper settings oem show up and enable
phone still locked in download mode
KG STATE:Checking
FAP LOCK OFF
OEM LOCK ON(U)
Best Regards!
netphone said:
Hi! to all
Here are details:
baseband version:A307FNXXU1ASHE
security patch:August 1,2019
in developper settings oem show up and enable
phone still locked in download mode
KG STATE:Checking
FAP LOCK OFF
OEM LOCK ON(U)
Best Regards!
Click to expand...
Click to collapse
Hello friend, maybe you can try to download and reinstall the same rom you have and use odin to install it, the rom will give you a clean system later you can try to enable OEM again!
netphone said:
Hi! to all
Here are details:
baseband version:A307FNXXU1ASHE
security patch:August 1,2019
in developper settings oem show up and enable
phone still locked in download mode
KG STATE:Checking
FAP LOCK OFF
OEM LOCK ON(U)
Best Regards!
Click to expand...
Click to collapse
open you phone and connect to internet
Enable Developer Options: go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
Enable OEM unlock and USB debugging options ( Settings -> Developer options )
Download and Install Samsung Mobile Phone Drivers ( ignore this if you have installed it ) Drivers Download
Enter Download Mode ( Connected USB Cable to PC, Turn Power off the phone, Press and hold Volume Down + Volume Up keys together then while pressing these keys connecting the phone to PC with USB Cable Data, release all keys when Download Mode appears ).
In Download Mode you see the long press Vol Up option to enter Device Unlock Mode. Unlock the bootloader ( that will wipe your device so be sure to backup of your data )
After Bootloader unlock, the phone will reboot and make sure the phone connected to the internet
now repeat (1) and go to devolper options you will found that OEM unlock is checked with gray and you cannot change it
now your bootloader will be unlocked successfully .
hi guys
i have a samsung s10e SM-G970F Exynos 9820. i enabled allow oem to be unlocked in developer options, and also usb debugging. i am running android 12 as phone just updated. i cant flash anything using odin it just fails all the time. i did notice in downlaod mode that it said next to oem it said oem on(u) and underneath it said KG checking.
any help with an explaination of what the both mean as i would like to flash twrp and custom rom
regards
albouet
Hi,
I have got samsung s22 ultra phone second hand and i wanted to root the phone as i am a developer but it seems there is a samsung finance app or some security policy which is blocking me to get into download mode. when i try to get into download mode it just reboots the phone. also in developer option i can not see unlock OEM option although i can see USB debugging option.
Well if you have United States Snapdragon you will not have OEM unlock toggle. And there is no root or bootloader unlock