Related
The Recently Launched A117 is a good and direct replacement to the A116..
Anyway Here it is
1. Drivers
http://mediafire.com/?e6c4j3d8j6c5ui3
2..ROM
http://d-h.st/K6W
3.ROOT Guide
By using Root with Restore by Bin4ry v15.7z(download from attachments)
1.Enable USB debugging on your device. To do that, go to Settings > Development > USB debugging.
2.Connect your device to any PC/laptop and install the drivers .
3.Unzip the root tool you downloaded above.
4.Change the mode of your device from USB Storage to Media Device and proceed further. This change can be done only when you have
connected your device to the PC, so don't go mad searching for this option before you have even connected your device.
6.Run the runme.bat file.
7.A command prompt with weird green letters will pop-up on your screen.
Follow the onscreen instructions carefully. To start off, you willl need to type in a "1" and press enter.
Note: If you ever want to Unroot your Micromax A88, follow the above steps till you reach this one and then, instead of typing "1", type "x" and hit enter. Follow the instructions that appear on the command prompt after that.
8Your device will reboot during the process after which Bin4ry will copy some files to your device.
9.Else just reboot your phone
10.When the green letters in the command prompt says Have Fun!
That means, your device is rooted now and you can enjoy Superuser permissions!
By Framaroot
MOD EDIT LINK REMOVED Must link to the main thread.
Install nd Click Root.Then install Busybox from play Store
CWM - !!{NOT TESTED BY ME BUT MY FRIEND TESTED IT}
Install Mobile Uncle Tools from Google Play
Recovery - MOD EDIT LINK REMOVED
1.Download the recovery and Put it in root of your SDCARD
2.Open Mobile uncle tools and select Recovery Update
3.Flash my recovery.img file
4.Done
If you Like my post please click THANKS
Is It Safe to Flash CWM Recovery ON Canvas Magnus Is It Really Tested I have A Canvas Magnus and I want to Install CWM recovery on it.
sayan8 said:
The Recently Launched A117 is a good and direct replacement to the A116..
Anyway Here it is
1. Drivers
http://mediafire.com/?e6c4j3d8j6c5ui3
2..ROM
Mod Edit Link Removed
3.ROOT Guide
By using Root with Restore by Bin4ry v15.7z(download from attachments)
1.Enable USB debugging on your device. To do that, go to Settings > Development > USB debugging.
2.Connect your device to any PC/laptop and install the drivers .
3.Unzip the root tool you downloaded above.
4.Change the mode of your device from USB Storage to Media Device and proceed further. This change can be done only when you have
connected your device to the PC, so don't go mad searching for this option before you have even connected your device.
6.Run the runme.bat file.
7.A command prompt with weird green letters will pop-up on your screen.
Follow the onscreen instructions carefully. To start off, you willl need to type in a "1" and press enter.
Note: If you ever want to Unroot your Micromax A88, follow the above steps till you reach this one and then, instead of typing "1", type "x" and hit enter. Follow the instructions that appear on the command prompt after that.
8Your device will reboot during the process after which Bin4ry will copy some files to your device.
9.Else just reboot your phone
10.When the green letters in the command prompt says Have Fun!
That means, your device is rooted now and you can enjoy Superuser permissions!
By Framaroot
MOD EDIT LINK REMOVED
Install nd Click Root.Then install Busybox from play Store
CWM - !!{NOT TESTED BY ME BUT MY FRIEND TESTED IT}
Install Mobile Uncle Tools from Google Play
Recovery - MOD EDIT LINK REMOVED - Untested recovery
1.Download the recovery and Put it in root of your SDCARD
2.Open Mobile uncle tools and select Recovery Update
3.Flash my recovery.img file
4.Done
If you Like my post please click THANKS
Click to expand...
Click to collapse
Give proper credit to the ROM creator. Copying is prohibited. You could be ban. And stop copying my work. It's my hard work.
Edit: I could see your rooting note. That's simply copy paste. Will report it soon!
Full Regards.
Minimilised_MR said:
Give proper credit to the ROM creator. Copying is prohibited. You could be ban. And stop copying my work. It's my hard work.
Edit: I could see your rooting note. That's simply copy paste. Will report it soon!
Full Regards.
Click to expand...
Click to collapse
Hey Bro i didnt copied -_-.
Thread Re-opened
Thread temporarily closed pending XDA investigation.
Thread re-opened. Rom download link re-established.
Links removed for Framawork.apk, as the link should be directed to the apk's XDA thread by the original author.
Especially for the CWM Recovery that the OP has not been tested. If the recovery was not compiled using all correct fstabs, the result will be a corrupted/damaged partition, and possibly a perma-bricked device.
MD
I am also looking for stock rom and stock recovery. How to take back up of these??
So i can go ahead and install cwm and root
A117: The software version “S9204P_MP_IN_MMX_18_FLASHER_USER” is confirmed. Release
A117: The software version “S9204P_MP_IN_MMX_18_FLASHER_USER” is confirmed.
Release note: Integrated ‘foneclay’ in the software.
https://www.adrive.com/public/UvawHB/S9204P_MP_IN_MMX_18_FLASHER_USER.rar
Please support me by hitting the THANKS BUTTON for me
Please regular update forum.....
Sent from my Samsung Galaxy S4 Mini GT-I9505 using XDA Premium 4 mobile app
Check below link for All in One Guide for Canvas Magnus. Regularly updated
http://forum.xda-developers.com/showthread.php?p=48466519
http://forum.xda-developers.com/showthread.php?t=2569049
Totally new guide! Simple step by step toutorial
It took us a while to get root on our devices. Hopefully we did it! Now we can enjoy benefits of having rooted device (like Xposed Modules etc). We have working TWRP recovery which allows us to backup your phone, flash SuperSU binaries, mods and custom ROMs (actually we are working on it). First: read whole post, then download necessary files and read it again. This guide will allow you to root your BLU Pure XL/Allview X2 Soul Xtreme/Gionee Elife E8/Condor Allure A100 and other clones I don't know.
If you don't know what is 'root' & TWRP nor understand the whole idea of rooting your phone this post (or even most of the XDA community) is not for you! Read everything carefully.
POSTING BUG REPORT/PROBLEM/ISSUE!
jaiwalla said:
HELP!!!
Where am I going wrong?!?!
Click to expand...
Click to collapse
I don't know where are you wrong...!
Maybe you say something else? Maybe give me some logcat?
I would help you if I knew the problem. As for now for me you don't have any problem. Your post is useless in this form.
You have to learn how to tell the error/problem/bug before you post anything on any forum.
If you want me to help you solving this situation send me private message or edit your post and tell the problem in the right form*, please.
Cheers,
bemolx
*Right form looks like:
What's the problem?
Did you check whole thread before posting?
If possible give me logcat/shown error
Make sure you read main post carefully
What you will need to get it working:
ADB and Fastboot drivers
SuperSU flashable zip archive
TWRP Recovery image
PC & your phone
BUT!
Code:
Your warranty is now void.
Everything you're doing with your devices is on your own!
We're not responsible for any damage on your phone!
If you don't understand what's root it's good time to STOP!
Now we're starting!
Look carefully on files you need (I've mentioned them above) and scroll down for download links. Download every file we need.
Note:
At the bottom of this post you'll find two versions of TWRP: 3.1.0-x and 2.8.6.0. Let me explain the difference:
TWRP v3.1.0-x: this version has been compiled from scratch & made by me. It is the newest available recovery version at the moment and without bugs. More info in the thread linked below.
TWRP v2.8.6.0: this version has been ported from Xiaomi Redmi Note 2 & made by @acheron1502. It's not the newest but working one. It has some little bugs. More info in the thread linked below.
I suggest you to download v3.1.0-x because it will get further support by me. But it is your choice now.
Setting up our workstation
I hope you have already downloaded everything we need.
On your Desktop create a new folder (for example "root").
Find package with ADB drivers, open it and extract to the "root" folder.
Now find TWRP image and place it also in our "root" folder. This image should look like this:
Code:
twrp-3.1.0-0-x2xtreme.img
or
Code:
BLU_PURE_XL_TWRP.img
Let's rename it like this (see below) to make our rooting process easier
Code:
twrp.img
Now we're setting up your phone
Open 'Settings' application. Scroll down to 'About phone'. Click about seven times on 'Build number'. You should see: "You are now developer".
Now find 'Developer options', then 'Enable USB Debugging' and simply enable it.
Connect your phone to the PC. On PC: find SuperSU.zip and copy it on your phone.
OMG!!! Flashing!!!
Okay... That's the most important step.
Turn off your phone. Press 'power' & 'vol +' together. This key combo should boot up your phone into stock recovery mode.
Scroll down using 'vol -' to 'Reboot bootloader' and confirm pressing 'power'. This will boot your phone into Fastboot mode.
On PC: open "root" folder. Open Command Prompt here (LShift + right mouse click -> 'open cmd here')
In the Command Prompt type:
Code:
fastboot flash recovery twrp.img
This command will flash TWRP recovery on you phone.
After flashing process is done reboot you phone into TWRP by pressing 'vol +' and 'power'. When you see bootlogo get your finger from the 'power' button. You will see TWRP logo. You can unplug USB cable now.
We're almost here!
Now you should see TWRP main page same like in the screenshots I've attached to this post.
We must flash SuperSU binaries to get rooted phone. To do this press 'Install' button.
You should see list of files/folders on your phone. Navigate to the SU.zip and choose it by clicking on it.
TWRP will ask you for permission to flash that zip package. To allow it to do so swipe to the right slider on the bottom of the screen. Now SuperSU is installing.
After installation process is done press 'Reboot system now' button. Your device will reboot into your system.
Done!!!
And there you go! Your device should be now rooted with TWRP recovery installed. Check if your phone is rooted correctly by installing ROOT Checker. To make rebooting process much easier and faster you can download Quick Reboot.
Xposed Modules
There's an option to install Xposed Modules as I mentioned at the top of this post. Not every module is working but you can try it and let us know what's working.
To get it working you need:
Xposed Installer Alpha App (allows you to download and manage modules)
Xposed SDK zip (the most important thing)
Original thread with those files is linked below.
Note:
It's important what version of SDK you are downloading. Our device has 64-bit ARM MediaTek chipset so it is arm64 and it's running lollipop 5.1 ROM which equals sdk22. By that meaning the SDK zip you should download looks pretty much the same like this:
Code:
xposed-v80-sdk22-arm64.zip
Installing
Place both files on your phone's storage and reboot to recovery. Press 'Install' and navigate to sdk.zip. Choose it, confirm installation - when it's done reboot into system. Now use any file browser and find XposedInstaller.apk and install it.
Now you can download any module you want. Further instructions in post linked below.
How to unroot
Most of you would like to flash stock OTA etc.
To do this you have to have stock recovery installed.
First open SuperSU app, then scroll down and look for 'Clear/unroot' option. Choose it and follow on-screen instructions.
Then download stock recovery image (downloads for Elife E8 and Allure A100 will be available when someone provide me a link). Place it the 'root' folder (or just in the same directory with fastboot drivers etc.). Rename downloaded file into recovery.img.
Method 1 - using Fastboot
Reboot phone into bootloader mode. Open terminal in the 'root' folder and type
Code:
fastboot flash recovery recovery.img
Now reboot into system by pressing power button for a while.
Method 2 - using TWRP
Copy downloaded recovery onto your phone's storage. Reboot phone into recovery mode. Press 'Install', then change from installing zips to installing imgs (bottom right button). Navigate to downloaded recovery file and choose it. Confirm installation. After that reboot into system.
You should be now unrooted and able to flash OTA.
Downloads:
ADB & Fastboot drivers: link
TWRP Recovery: TWRP v3.1.0-0 (recomended) or TWRP v2.8.6.0 (unofficial)
SuperSU binaries by @Chainfire: link
Stock recovery: Pure XL & X2 Xtreme (extract .zip before renaming/installing)
TWRP Materialised - Dark / Light / Play
Xposed Modules
Special thanks go to the awesome team!
@FuMMoD
@acheron1502
@dexterxx
@spit85
Thank you guys. Without you it wouldn't be possible!
ENJOY!
Hey @bemolx ,
Since your thread is more of a HOW TO root, would it be OK if you move this into GENERAL and field all the rooting process questions there?
I will start a new Dev Thread for TWRP and all TWRP related development issues.
You can then use that new thread for all your download links.
EDIT:
Please use this link for TWRP in your guide.
bemolx said:
My friends and me figured out how to get root on our phones. By the way @acheron1502 made TWRP recovery which allows us flash Super SU 2.46 (Stable). Also you can flash Xposed Modules as you want.
HOW TO INSTALL:
Connect phone to your PC
Make sure you have adb and fastboot drivers installed
Download TWRP from this post
Download Super SU
Copy SU.zip to your phone's storage
Reboot phone into fastboot/bootloader mode
Flash recovery using: fastboot flash "downloadedrecoveryfilename"
Reboot to TWRP by pressing and holding Vol+ & power buttons (still in fastboot mode!)
In TWRP flash SU.zip, then reboot
What doesn't work:
- no adb in recovery
- you tell us
And there you go! Your device should be now rooted with TWRP recovery installed. Check if your phone is rooted correctly by installing ROOT Checker.
BUT!
Everything you're doing with your devices is on your own! We're not responsible for any damage on your phone!
Special thanks go to the awesome team!
@FuMMoD
@acheron1502
@dexterxx
@spit85
Thank you guys. Without you it wouldn't be possible!
ENJOY!
Click to expand...
Click to collapse
Do I have to install a particular driver for my Blu Pure XL for adb to recognize the phone is connected? Please provide a link to the driver you used. Also, please provide a link to the adb / fastboot you recommend. Thank you and great work to you all!!
acheron1502 said:
Hey @bemolx ,
Since your thread is more of a HOW TO root, would it be OK if you move this into GENERAL and field all the rooting process questions there?
I will start a new Dev Thread for TWRP and all TWRP related development issues.
You can then use that new thread for all your download links.
Click to expand...
Click to collapse
Okay, no problem
mhajii210 said:
Do I have to install a particular driver for my Blu Pure XL for adb to recognize the phone is connected? Please provide a link to the driver you used. Also, please provide a link to the adb / fastboot you recommend. Thank you and great work to you all!!
Click to expand...
Click to collapse
Just take a look at Google's development page - there are drivers needed to get it working. Nothing else
bemolx said:
Okay, no problem
Click to expand...
Click to collapse
Once it's moved, see of you can get it PINNED to top so everyone can find it easily.
It states unknown partition 'BLU_PURE_XL_TWRP' "error: cannot determine image filename for 'BLU_PURE_XL_TWRP' what can I do? Thanks
fastboot flash recovery filename.img
@bemolx, fix it
error: cannot load 'BLU_PURE_XL_TWRP' please help. Thanks
---------- Post added at 01:12 PM ---------- Previous post was at 01:04 PM ----------
dexterxx said:
fastboot flash recovery filename.img
@bemolx, fix it
Click to expand...
Click to collapse
Got it thanks a mil
bemolx said:
My friends and me figured out how to get root on our phones. By the way @acheron1502 made TWRP recovery which allows us flash Super SU 2.46 (Stable). Also you can flash Xposed Modules as you want.
HOW TO INSTALL:
Connect phone to your PC
Make sure you have adb and fastboot drivers installed
Download TWRP from this post
Download Super SU
Copy SU.zip to your phone's storage
Reboot phone into fastboot/bootloader mode
Flash recovery using: fastboot flash "downloadedrecoveryfilename"
Reboot to TWRP by pressing and holding Vol+ & power buttons (still in fastboot mode!)
In TWRP flash SU.zip, then reboot
What doesn't work:
- no adb in recovery
- you tell us
And there you go! Your device should be now rooted with TWRP recovery installed. Check if your phone is rooted correctly by installing ROOT Checker.
BUT!
Everything you're doing with your devices is on your own! We're not responsible for any damage on your phone!
Special thanks go to the awesome team!
@FuMMoD
@acheron1502
@dexterxx
@spit85
Thank you guys. Without you it wouldn't be possible!
ENJOY!
Click to expand...
Click to collapse
What about the Ono U1? It's an inexpensive phone with high end specs thanks again http://forum-lw-3.xda-cdn.com/images/smilies/wink.gif
Swarai said:
What about the Ono U1? It's an inexpensive phone with high end specs thanks again http://forum-lw-3.xda-cdn.com/images/smilies/wink.gif
Click to expand...
Click to collapse
It *might* work based on specs I saw on u1labs.com ...
Can you post the values in your /proc/partinfo so I can compare with ours?
acheron1502 said:
It *might* work based on specs I saw on u1labs.com ...
Can you post the values in your /proc/partinfo so I can compare with ours?
Click to expand...
Click to collapse
The specs haven't been updated yet, but the phone should be released soon along with the kernel source.
Swarai said:
The specs haven't been updated yet, but the phone should be released soon along with the kernel source.
Click to expand...
Click to collapse
Let's keep the development thread about this phone (Blu Pure XL) and other phones with the exact same base maker/model (ie. Gionee E8, Allview x2 Extreme). If you are asking about gaining root for a different phone and need some Mind-share from this group of people due to the other phone having a similar SOC, the best way is to open a new thread in the Q&A Section or the General Section, but I think you should wait until the phone is released first IMHO.
bemolx said:
7. Flash recovery using: fastboot flash "downloadedrecoveryfilename"
Click to expand...
Click to collapse
This should be fastboot flash recovery BLU_PURE_XL_TWRP.img
Also ... I requested this thread be moved to General and be Pinned for easy finding for anyone that has this phone
Guys,
1) THANKS for GREAT work!
2) Please provide more CLEAR / ACCURATE details on how to do this, because NOOBs (including myself) get very confused.
a) Link to adb / fastboot drives. Saying "they are in Google development section means nothing"
b) How do I "Reboot phone into fastboot/bootloader mode"??
This would help so many people root without bricking the phone.
Thank you once again!
levchikb said:
Guys,
1) THANKS for GREAT work!
2) Please provide more CLEAR / ACCURATE details on how to do this, because NOOBs (including myself) get very confused.
a) Link to adb / fastboot drives. Saying "they are in Google development section means nothing"
b) How do I "Reboot phone into fastboot/bootloader mode"??
This would help so many people root without bricking the phone.
Thank you once again!
Click to expand...
Click to collapse
Thanks for reply! Once I get a little more time I'll re-write this "how to".
Cheers
Everything should be now clear. I've added links for drivers etc. Also i've re-wrote it for better understanding
Sent from Nexus 5
I'm having issues with fastboot. It says it's blocked for security. Is there something required that isn't normally on android phones to get the fastboot method to actually allow me to enter fastboot? At the beginning was just going to recov ery and putting reboot into fastboot.
alaiwy said:
I'm having issues with fastboot. It says it's blocked for security. Is there something required that isn't normally on android phones to get the fastboot method to actually allow me to enter fastboot? At the beginning was just going to recov ery and putting reboot into fastboot.
Click to expand...
Click to collapse
Try to reboot manually to recovery, then you should see option 'reboot bootloader'. After choosing it follow my instructions
any1 have stock rom to reflash full rom , pure xl ?
Root Micromax Canvas 6 Pro
Method 1:
You can root your Micromax Canvas 6 Pro using Kingroot by this method.
Your device should be adequately charged.
Take backup of your important data at safe place.
Download latest Kingroot apk from this link.
Enable Unknown Sources from Security option in Settings.
Install the the Kingroot app.
Open Kingroot app.
Follow in-app instructions to root Micromax Canvas 6 Pro.
Method 2:
If method 1 fails to root Micromax Canvas 6 Pro, then you can this second method. Be careful as this method requires more attention.
1. Download any of the custom recovery attached in this post.
2. Download SuperSU from here.
3. Install ADB and Fastboot drivers on your PC from here.
4. Enable Developer options in your device. Go to About phone. Tap 7 times on build number. This will enable Developer Options.
5. Enable USB Debugging from Developer Options Settings.
6. Transfer Supersu zip and custom recover zip to your external SD card.
7. Now open a command window inside the folder where you have installed ADB and Fastboot drivers. To do that, “Shift + Right click” on any empty white space inside the folder and then select “Open command window here” from the context menu.
8. Reboot your device in fastboot mode using this command
adb reboot bootloader
9. Now use this command to install recovery. First unzip downloaded recovery zip and find .img file. Rename it to recovery.img
fastboot flash recovery recovery.img
10. Now boot into recovery using following command.
fastboot boot recovery.img
11. You will be booted into your chosen recovery.
12. Now flash Supersu zip from your chosen recovery.
13. Process completed.
Warning: I am not responsible if anything goes wrong, bricked device.
hi i tried to flash recovery but unfortunately i got the message
writing 'recovery'... FAILED (remote: download for partition 'recovery' is not allowed)
I need to know how to unlock bootloader for micromax canvas 6 pro to flash recovery.
Thank you
hari007sh said:
writing 'recovery'... FAILED (remote: download for partition 'recovery' is not allowed)
I need to know how to unlock bootloader for micromax canvas 6 pro to flash recovery.
Thank you
Click to expand...
Click to collapse
Use the following command to unlock bootloader when you are in fastboot mode
Code:
fastboot oem unlock
still nobody intresting to launch stock and custom roms for micromax canvas 6 plus......time passsing away....
never ever (i mean it when i say) try fastboot oem unlock on this device will hard brick your device... even recovery wont open.....Have suffered myself..
Can you port cyanogen mod to Canvas 6 Pro?
bravonova said:
Root Micromax Canvas 6 Pro
Method 1:
You can root your Micromax Canvas 6 Pro using Kingroot by this method.
Your device should be adequately charged.
Take backup of your important data at safe place.
Download latest Kingroot apk from this link.
Enable Unknown Sources from Security option in Settings.
Install the the Kingroot app.
Open Kingroot app.
Follow in-app instructions to root Micromax Canvas 6 Pro.
Method 2:
If method 1 fails to root Micromax Canvas 6 Pro, then you can this second method. Be careful as this method requires more attention.
1. Download any of the custom recovery attached in this post.
2. Download SuperSU from here.
3. Install ADB and Fastboot drivers on your PC from here.
4. Enable Developer options in your device. Go to About phone. Tap 7 times on build number. This will enable Developer Options.
5. Enable USB Debugging from Developer Options Settings.
6. Transfer Supersu zip and custom recover zip to your external SD card.
7. Now open a command window inside the folder where you have installed ADB and Fastboot drivers. To do that, “Shift + Right click” on any empty white space inside the folder and then select “Open command window here” from the context menu.
8. Reboot your device in fastboot mode using this command
adb reboot bootloader
9. Now use this command to install recovery. First unzip downloaded recovery zip and find .img file. Rename it to recovery.img
fastboot flash recovery recovery.img
10. Now boot into recovery using following command.
fastboot boot recovery.img
11. You will be booted into your chosen recovery.
12. Now flash Supersu zip from your chosen recovery.
13. Process completed.
Warning: I am not responsible if anything goes wrong, bricked device.
Click to expand...
Click to collapse
I think it's a decent device & good hardware specs. Many people would be most thankful if you can port Cyanogem Mod on Canvas 6 Pro
Sashank Sharma said:
I think it's a decent device & good hardware specs. Many people would be most thankful if you can port Cyanogem Mod on Canvas 6 Pro
Click to expand...
Click to collapse
No.
micromax e485 recovery
Any scope for micromax e485 recovery ???????
Want recovery badly:
Resurrection Remix
please port roms
bravonova said:
Use the following command to unlock bootloader when you are in fastboot mode
Code:
fastboot oem unlock
Click to expand...
Click to collapse
Hello!
I tried to root my Micromax E484 with the Method No. 2 given by you!
All went fine till the command - fastboot flash recovery recovery.img
But, after entering next command which is - fastboot boot recovery.img - it gave an error - FAILED : UNKNOWN COMMAND
Now, the problem is that my phone is not booting at all. I get a screen of TWRP and then the fon restarts automatically and this thing keeps on happening!
Can you pls. help me? What should be done now in order for the phone to boot up normally? Pls..
Micromax-E484- Easy Way to Root By SP tool
There is also other way to root Your Micromax E484 ( Canvas 6 Pro)
Requirement:
1. SP Flash Tool
2. TWRP Recovery ZIP
3. Supersu Binary..zip..
4. Scatter File of E484 Firmware
5. preloader_lcsh6795_lw_hz_l1.bin
6. MediaTek Driver Vcom Driver
Download All Requirement Files.
Frist Install MediaTek Vcom Driver in your PC or Laptop......(Win..Xp, 7, 8 or Higher)
Make a Folder (By any Name) Extract TWRP zip (there is a "recovery.img" , We need this file), Scatter File "MT6795_Android_scatter.txt" and "preloader_lcsh6795_lw_hz_l1.bin" in this folder.
So Now there are two File in New Folder 1. recovery.img, 2. Scatter File "MT6795_Android_scatter.txt" and 3. "preloader_lcsh6795_lw_hz_l1.bin" Files
Now Open SP Flash Tool zip and Extract it and Open "flash_tool.exe" and Go to Download Tab then Load "MT6795_Android_scatter.txt" file form Option of "Scatter Loading File" (From that folder where you Put "MT6795_Android_scatter.txt" File)
Now Recovery.img and "preloader_lcsh6795_lw_hz_l1.bin" files will be Loaded Automatically in this Tool
Now insert Supersu Binary zip into your SD Card...
Now Switch of Your Mobile.....
Click...Download and Attach Your Mobile to PC/Laptop.........
Wait while ......Till Download OK Green Tick Show... it means File Downloaded Successfully...
Now Plug Out your Phone and Press "Volumn +" and "Power Botton" at the Time...Wait While untill Phone Boot and Realease All Bottons as soon as Android Logo Comes.....
Now TWRP Recovery............ Install > SD Card (Browse Your Supersu Binary Zip > Select.... Supersu Binary .zip > Swipe to Flash... After Successfully Flash....Reboot Your System....
Now Your Phone has been Rooted.........
Now Enjoy....With Your TWRP and Rooted Devise....
Link to Download FIles
""https://drive.google.com/open?id=1_GvHvgimSh8lllguNN5gPs8F_JdvZNSl""
msathaiah said:
Any scope for micromax e485 recovery ???????
Want recovery badly:
Click to expand...
Click to collapse
Please see this
https://forum.xda-developers.com/an...romax-canvas-6-micromax-canvas-t3387886/page2
---------- Post added at 08:27 AM ---------- Previous post was at 08:24 AM ----------
techie_vintage said:
Hello!
I tried to root my Micromax E484 with the Method No. 2 given by you!
All went fine till the command - fastboot flash recovery recovery.img
But, after entering next command which is - fastboot boot recovery.img - it gave an error - FAILED : UNKNOWN COMMAND
Now, the problem is that my phone is not booting at all. I get a screen of TWRP and then the fon restarts automatically and this thing keeps on happening!
Can you pls. help me? What should be done now in order for the phone to boot up normally? Pls..
Click to expand...
Click to collapse
See this if it help you
https://forum.xda-developers.com/an...romax-canvas-6-micromax-canvas-t3387886/page2
I am having the same problem how do i solve it ?
techie_vintage said:
Hello!
I tried to root my Micromax E484 with the Method No. 2 given by you!
All went fine till the command - fastboot flash recovery recovery.img
But, after entering next command which is - fastboot boot recovery.img - it gave an error - FAILED : UNKNOWN COMMAND
Now, the problem is that my phone is not booting at all. I get a screen of TWRP and then the fon restarts automatically and this thing keeps on happening!
Can you pls. help me? What should be done now in order for the phone to boot up normally? Pls..
Click to expand...
Click to collapse
Pls help
Still in bootloop
Jack2jadav said:
Please see this
https://forum.xda-developers.com/an...romax-canvas-6-micromax-canvas-t3387886/page2
---------- Post added at 08:27 AM ---------- Previous post was at 08:24 AM ----------
See this if it help you
https://forum.xda-developers.com/an...romax-canvas-6-micromax-canvas-t3387886/page2
Click to expand...
Click to collapse
I had the same problem and I tried all the steps mentioned above still in boot loop
I tried this and it was still in bootloop and the it suddenly loaded into twrp somehow
Thank you so much
---------- Post added at 12:16 PM ---------- Previous post was at 11:38 AM ----------
Jack2jadav said:
Please see this
https://forum.xda-developers.com/an...romax-canvas-6-micromax-canvas-t3387886/page2
---------- Post added at 08:27 AM ---------- Previous post was at 08:24 AM ----------
See this if it help you
https://forum.xda-developers.com/an...romax-canvas-6-micromax-canvas-t3387886/page2
Click to expand...
Click to collapse
I am stuck at twrp, am not able to wipe data
It says failed to mount '/data'
What should I do
Looking for a perfect tutorial to root honor 6 H60-L04 followed so many things which i got from internet but nothing worked and some of them were too complicated.
you should follow the standadrd methods.. search in the forum here and youl find one,
id recomend standard method,
first unlock
flash twrp
install supersu
profit
its easy !,,
First Follow this Thread Or Use This Tool
Second Download TWRP and extract if was in zip file and rename it to Recovery.img
Third ( Follow This Thread )
Move Recovery.img To ADB Folder Which Created after Third Step.
Right Click inside the folder While holding Shift Button .
Click Run CMD
Type
Code:
ADB DEVICES
u shout see ur device Serial No.
Then Type
Code:
Fastboot Flash Recovery Recovery.img
Code:
Fastboot Reboot
now U should be having Touch Recovery TWRP
Download This Superuser File
Go Recovery Throw Power and Volume Up method (ur honor should be off ) then use 2 buttons method.
hit install
chose SD card
Chose Superuser.zip
Flash .
u r done !.
Use honor multitool: http://forum.xda-developers.com/honor-6/general/honor6-multi-tool-t2963060
Sent from my H60-L04 using XDA-Developers mobile app
I've done deep search about this concern for 2 hours but I've only seen twrp for M5 mini but with different Mediatek. I have MT6580 so some forums doesnt give me any answers so I need help to you guys if you have twrp for this type of Mediatek. Need to flash a rom to my phone~ Thanks in advance
Upload your stock recovery, we'll see if something can be done
I'm new so i don't know how to extract my stock recovery
CSAPawn said:
I'm new so i don't know how to extract my stock recovery
Click to expand...
Click to collapse
Then you download your stock firmware just extract it with any unzipper app like winrar or 7zip, then zip it and upload it here or it´s not able upload it to some cloud host like Google Drive
This is my stock firmware Lollipop
http://www.mediafire.com/file/wd5a4xqftiao7t6/Gionee_M5_Mini_MT6580_5.1.zip
I have Marshmallow update right now so here's the update file https://mega.nz/#!jQdWkYiB
CSAPawn said:
I have Marshmallow update right now so here's the update file https://mega.nz/#!jQdWkYiB
Click to expand...
Click to collapse
Download it, you might need it in the future, and inside the zip you will see a file called recovery, extract it and upload me here, I need this file to try to made a custom recovery for your device
Okay! Le me just download it~
https://drive.google.com/file/d/1i57tu6g-qLWFHL8JknfrHJqh1SsYDk_X/view here's the recovery of Marshmallow update
CSAPawn said:
https://drive.google.com/file/d/1i57tu6g-qLWFHL8JknfrHJqh1SsYDk_X/view here's the recovery of Marshmallow update
Click to expand...
Click to collapse
This is not your recovery, there must to have other recovery with image extension, guide you for the size, atleast a 10 MB
That is the only one with the name "recovery" in the zip file, i think i should find it in Lollipop stock rom. Gonna download it first~
CSAPawn said:
That is the only one with the name "recovery" in the zip file, i think i should find it in Lollipop stock rom. Gonna download it first~
Click to expand...
Click to collapse
Show me a screen of your zip open please to see the files.
What is the size of your recovery cause the uploaded is just some kbs
And what is the size of the boot image
SubwayChamp said:
Show me a screen of your zip open please to see the files.
What is the size of your recovery cause the uploaded is just some kbs
And what is the size of the boot image
Click to expand...
Click to collapse
https://ibb.co/cYWrsy here's the main directory of the zip
https://ibb.co/nMLqkJ and recovery file found on "sig" folder on main directory
Boot Image file size is 7.48 MB
I'm now downloading the Lollipop Stock Rom because that Marshmallow Rom is just an update which might be incomplete in some files~
https://drive.google.com/open?id=1wX5N5_NzKhbg4gWG2RIQ6Ta5MzHYK0W1
Here's the link of 2 files with recovery file name in .img file format
https://ibb.co/gGCvKd
Here's the full content of the Lollipop Stock Rom
CSAPawn said:
https://drive.google.com/open?id=1wX5N5_NzKhbg4gWG2RIQ6Ta5MzHYK0W1
Here's the link of 2 files with recovery file name in .img file format
https://ibb.co/gGCvKd
Here's the full content of the Lollipop Stock Rom
Click to expand...
Click to collapse
Ok, now you need to unlock bootloader. Follow the next steps:
Download to your pc the latest version of adb installer from here https://androidmtk.com/download-15-seconds-adb-installer , in the process just type "y" to all questions. After it finishes unpack this adb folder and put it in your main drive, by i.e. c: drive
View attachment adb.zip
Install all the drivers for your device.
1- In your device go to settings/about device/build number and tap 7 times, then go back to settings and you will see developer options into settings, enable USB debugging and enable OEM unlock if it´s present,
2- Extract from the zip twrp.img and put it inside adb folder
View attachment twrp-wl2.zip
3- Connect your device power on to pc and run the file "run-adb" as administrator with right mouse button
4- Type adb reboot bootloader and you will be prompted in display of your device, tap on the small box "always allow" and tap on "ok"
5- Now device will reboot to fastboot mode, type fastboot devices you have to see a serial of your device in the window, then if it´s detected type now fastboot oem unlock you have to confirm wiith the button of your device, pay attention.
6- Then you will go to flash twrp onto your device, for this type fastboot flash recovery twrp.img and then to reboot to recovery type fastboot boot twrp.img is important that here device reboots to recovery before to reboot to system.
7- In twrp you will be prompted to allow modifications, just swipe to confirm.
If you also want to root your device download the latest version of Magisk in zip format to flash it through twrp.
When al finishes if sucessful you have to format data (all your data will gone) in order to can reboot to system again due to encryption, anyway unlocking bootloader most probably you will lose it before.
Read carefully and do steps one by one, don´t jump nor ignore nothing of the indicated to avoid any damage. If you are not sure in some steps just stops process and ask before.
I´m not sure you that this twrp matches for your device cause I can´t try before and but will see that.
Don´t forget to provide screenies of the process if something goes wrong to can clear.
OMG Thank you very much for this guide, I'll follow the steps later and post a pic after~
SubwayChamp said:
Ok, now you need to unlock bootloader. Follow the next steps:
Download to your pc the latest version of adb installer from here https://androidmtk.com/download-15-seconds-adb-installer , in the process just type "y" to all questions. After it finishes unpack this adb folder and put it in your main drive, by i.e. c: drive
View attachment 4530163
Install all the drivers for your device.
1- In your device go to settings/about device/build number and tap 7 times, then go back to settings and you will see developer options into settings, enable USB debugging and enable OEM unlock if it´s present,
2- Extract from the zip twrp.img and put it inside adb folder
View attachment 4530170
3- Connect your device power on to pc and run the file "run-adb" as administrator with right mouse button
4- Type adb reboot bootloader and you will be prompted in display of your device, tap on the small box "always allow" and tap on "ok"
5- Now device will reboot to fastboot mode, type fastboot devices you have to see a serial of your device in the window, then if it´s detected type now fastboot oem unlock you have to confirm wiith the button of your device, pay attention.
6- Then you will go to flash twrp onto your device, for this type fastboot flash recovery twrp.img and then to reboot to recovery type fastboot boot twrp.img is important that here device reboots to recovery before to reboot to system.
7- In twrp you will be prompted to allow modifications, just swipe to confirm.
If you also want to root your device download the latest version of Magisk in zip format to flash it through twrp.
When al finishes if sucessful you have to format data (all your data will gone) in order to can reboot to system again due to encryption, anyway unlocking bootloader most probably you will lose it before.
Read carefully and do steps one by one, don´t jump nor ignore nothing of the indicated to avoid any damage. If you are not sure in some steps just stops process and ask before.
I´m not sure you that this twrp matches for your device cause I can´t try before and but will see that.
Don´t forget to provide screenies of the process if something goes wrong to can clear.
Click to expand...
Click to collapse
When I type fastboot devices nothing happens, adb says <waiting for device> and my phone is now in FASTBOOT mode...
https://ibb.co/gf9RUd
Already Installed ADB installer, extract adb.zip into my C. then run administrator.
USB Debugging and OEM Unlock has been enabled in my phone but still my PC doesn't show any serial number
I think my PC doesn't recognize my phone
CSAPawn said:
Already Installed ADB installer, extract adb.zip into my C. then run administrator.
USB Debugging and OEM Unlock has been enabled in my phone but still my PC doesn't show any serial number
I think my PC doesn't recognize my phone
Click to expand...
Click to collapse
Just copy paste all the commands that I gave you. It´s fastboot devices not fastboot device in fastboot you ever have to write exactly or the command won´t work.