Update 1/2/18 : Removed link until we get a Restore that works across all device's.
This will will help you restore back to a clean OS install using Twrp.
1.Download Files to your computer Unzip and place "Stock Restore 123017" Folder in a folder Named "TWRP".
2.Move TWRP folder you created and place them on your Phone's SD Card or Push them using adb command
Code:
adb push TWRP /TWRP
3. While in Twrp recovery click Restore and navigate to the back up folder.
4. Restore all and reboot. First boot will take a couple of mins so give it time.
This should bring you back up from the dead.
Edit:
If you accidentally flashed Twrp in the wrong slot then only restore boot using this back up.
This should Fix any wifi issues you may be having.
https://mega.nz/#!ogclRKCL!YmOMbkhR8oc5MUdxUupdwxRe7BHJGUXRZnal5rW2S_w
Awesome, thanks again! Glad to see your ontop of things in the development of this phone!
@Xshooter726
Can this be used to rebrand the carrier version? Three are still slacking with the second update which I feel is affecting the camera and want to resolve it myself now dees has blessed us with recovery
I restored using your back up but the phone just stays booting for 10 mins plus and I have a warning with "Your device is corrupt"
PupPupG said:
I restored using your back up but the phone just stays booting for 10 mins plus and I have a warning with "Your device is corrupt"
Click to expand...
Click to collapse
What slot did you restore to? and is the message of corruption in TWRP?
PupPupG said:
I restored using your back up but the phone just stays booting for 10 mins plus and I have a warning with "Your device is corrupt"
Click to expand...
Click to collapse
Getting the same thing unfortunately. Might have to wait for the factory images.
CptClubs said:
@Xshooter726
Can this be used to rebrand the carrier version? Three are still slacking with the second update which I feel is affecting the camera and want to resolve it myself now dees has blessed us with recovery
Click to expand...
Click to collapse
Not sure. I don't have a carrier version to test it with.
fivearcosstheeye said:
Getting the same thing unfortunately. Might have to wait for the factory images.
Click to expand...
Click to collapse
Can you run Md5 check sum? I think my upload may have been interrupted.
MD5 Should match this
fe23d7ebb04818e5f3d661e5b67acee0
Xshooter726 said:
Can you run Md5 check sum? I think my upload may have been interrupted.
MD5 Should match this
fe23d7ebb04818e5f3d661e5b67acee0
Click to expand...
Click to collapse
Ran a check and the upload was correct. I've tried restoring the backup to both A & B but neither would work. I'm using a Three branded Razer Phone so it might just be something to do with that?
PupPupG said:
Ran a check and the upload was correct. I've tried restoring the backup to both A & B but neither would work. I'm using a Three branded Razer Phone so it might just be something to do with that?
Click to expand...
Click to collapse
Hmmm that maybe why. I was running the latest update when I did the back up and Three branded phones haven't received the latest update yet. Looks like Three branded phones will have to wait for Official Images. Sorry guys
..Well Unless someone with a clean os installed on a three branded phone does a back up similar to mine then that should work.
PupPupG said:
I restored using your back up but the phone just stays booting for 10 mins plus and I have a warning with "Your device is corrupt"
Click to expand...
Click to collapse
Xshooter726 said:
Hmmm that maybe why. I was running the latest update when I did the back up and Three branded phones haven't received the latest update yet. Looks like Three branded phones will have to wait for Official Images. Sorry guys
..Well Unless someone with a clean os installed on a three branded phone does a back up similar to mine then that should work.
Click to expand...
Click to collapse
I don't have a branded carrier version. Going to try a couple more things and if that don't work we'll have to wait for factory images or a custom rom.
When restoring using TWRP, we're supposed to include the 'Vendor' options as well as part of the restoring process? I also restored in both slots.
I have a feeling I just made a very expensive mistake when I tried restoring - left out the 'Vendor' (bottom two) and now it's been on the booting animation for a good 30mins. Can't force shut off by holding the power button or using the vol dwn + pwr to get into download mode. Holding vol up+pwr will get me the 'Razer powered by Android' splash screen and then it just goes back into the animation.
BakaSenpai said:
When restoring using TWRP, we're supposed to include the 'Vendor' options as well as part of the restoring process? I also restored in both slots.
I have a feeling I just made a very expensive mistake when I tried restoring - left out the 'Vendor' (bottom two) and now it's been on the booting animation for a good 30mins. Can't force shut off by holding the power button or using the vol dwn + pwr to get into download mode. Holding vol up+pwr will get me the 'Razer powered by Android' splash screen and then it just goes back into the animation.
Click to expand...
Click to collapse
Hey man, I ran into the same issue as you, so what I did was leave the usb plugged in and held down vol up+power till the phone's screen went black, then immediately held down the vol down button, this brought me into download mode, then I entered:
fastboot flash boot twrp-3.2.1-0-cheryl.img && fastboot reboot
into adb and my phone went back into twrp.
Can't help with the getting back into the system, I'm still waiting on that too, but hope this helps
Same for me. device corrupted after the restock restore on a US imported Razer Phone. Cant use it now. Have to get a replacement cheap phone since it is my daily phone lmfao.
My upload is for a full restore but if you have only messed up when flashing boot IMG and it's keeps going straight to Twrp then only restore boot from my back up. Your system should still be intact. I will upload just the boot.img alone.
If you accidentally flashed Twrp in the wrong slot then only restore boot using twrp.
https://mega.nz/#!ogclRKCL!YmOMbkhR8oc5MUdxUupdwxRe7BHJGUXRZnal5rW2S_w
Xshooter726 said:
If you accidentally flashed Twrp in the wrong slot then only flash this boot.img using fastboot to get you back to normal.
https://mega.nz/#!ogclRKCL!YmOMbkhR8oc5MUdxUupdwxRe7BHJGUXRZnal5rW2S_w
Click to expand...
Click to collapse
Maybe i am wrong but in this zip file is a twrp boot image not a boot.img file ?
Quashhh said:
Hey man, I ran into the same issue as you, so what I did was leave the usb plugged in and held down vol up+power till the phone's screen went black, then immediately held down the vol down button, this brought me into download mode, then I entered:
fastboot flash boot twrp-3.2.1-0-cheryl.img && fastboot reboot
into adb and my phone went back into twrp.
Can't help with the getting back into the system, I'm still waiting on that too, but hope this helps
Click to expand...
Click to collapse
Hey, thanks for that suggestion! I was able to get into download mode and I flashed my phones own recovery and I got it to work. Wiped both a & b slot and restored both of them with my recovery.
The only problem (not so sure if it is an issue) is the backup I made is only of the Boot and System Image as per the TWRP instructions. So when I boot into slot a_ I get an error when I boot up 'There's an internal problem with your device. Contact your manufacturer for details.' Switching into slot b, I don't get that error. However, here's the weird thing (I think at least), when I go back into TWRP and switch to slot a, I get a bootloop into TWRP.: So, if I decide to continue on, and flash the TWRP zip file and then subsequently Magisk - I'll lose wifi and etc.
If I end up using Xshooter's full restore img - I'll do the same thing - wipe both slot a&b and restore both slots after. However, I'll get a message after the Razer splash screen say my phone is 'Corrupt' - and this is if I restore with the Vendor options. If I exclude the Vendor options, I'll be stuck in the animation. I lied - I'm stuck on the Corrupt screen now. I can get into TWRP at least...
So, in a bit of a bind here now.
BakaSenpai said:
Hey, thanks for that suggestion! I was able to get into download mode and I flashed my phones own recovery and I got it to work. Wiped both a & b slot and restored both of them with my recovery.
The only problem (not so sure if it is an issue) is the backup I made is only of the Boot and System Image as per the TWRP instructions. So when I boot into slot a_ I get an error when I boot up 'There's an internal problem with your device. Contact your manufacturer for details.' Switching into slot b, I don't get that error. However, here's the weird thing (I think at least), when I go back into TWRP and switch to slot a, I get a bootloop into TWRP.: So, if I decide to continue on, and flash the TWRP zip file and then subsequently Magisk - I'll lose wifi and etc.
If I end up using Xshooter's full restore img - I'll do the same thing - wipe both slot a&b and restore both slots after. However, I'll get a message after the Razer splash screen say my phone is 'Corrupt' - and this is if I restore with the Vendor options. If I exclude the Vendor options, I'll be stuck in the animation.
So, in a bit of a bind here now.
Click to expand...
Click to collapse
No problem, I was just about to give up and settle with a pretty cool paper weight till i tried that out, now i'm gonna try and restore the backup to both slots and try Xshooters method...
Fingers crossed
@BakaSenpai and @Quashhh if you both are able to put your backup on google drive to share it with me so that i can try some options? i have the same issue now. I hope you both get it sorted.
grtz
Steven
Related
Hey everyone,
I got a Nexus S that gets stuck on the Google logo when it starts up. I can get the phone into the bootloader and I can also clear the data from the phone but that hasn't fixed it. If you have any suggestions, please respond to the thread. Thank you!
I had this issue once for some reason... I had to take out the battery and put it back in, then boot into recovery and wipe the cache/davlik cache... Have you tried that yet??
brenix said:
I had this issue once for some reason... I had to take out the battery and put it back in, then boot into recovery and wipe the cache/davlik cache... Have you tried that yet??
Click to expand...
Click to collapse
Yah, i just did it and it didnt solve my problem but thanks for the suggestions
Sounds to me like you flashed an incompatible kernel. Have you recently flashed anything?
lostgoatX7 said:
Sounds to me like you flashed an incompatible kernel. Have you recently flashed anything?
Click to expand...
Click to collapse
No but the person I purchased it from might have. Does anyone know how to load stock android becuase I'm not experienced with rooting.
Looks like he bricked it, lucky for you, it's a Nexus. You have to find a stock Gingerbread ROM and flash it with ODIN or maybe through recovery. Look around for a stock ROM.
Sent from my Xoom
any solution?
hi guys.i have the same issue.does anyone have a solution for this?
i had the same problem.....what i did was cleared everything on recovery and flashed cyanogenmod and now is all good (this was of course after changing my underwear lol )
Smokexz said:
Looks like he bricked it, lucky for you, it's a Nexus. You have to find a stock Gingerbread ROM and flash it with ODIN or maybe through recovery. Look around for a stock ROM.
Sent from my Xoom
Click to expand...
Click to collapse
how can I do it?
I got the same problem.
Nexus S stuck at Google lOgo
I have the same Issue
Here is the Boot Loader Details.
Boot Loader version is : I9020XXKA3
baseband : I9020XXKB1
Locked sTate : LOCKEd
I have downloaded the stock nandroid , but not able to put it on the phone memory.
then tried to unlock the BOOT Loader in order to install Clock..Recovery , but there also after selecting Yes while Running Fastboot oem unlock , phone does not do anything.
then tried to load the file using ADB mode, but when i run adb devices , it doesnt show any device. or when i run adb remount it says "Error device not found"
Please help me get out of it.....
Similar problem
Ahoy!
I have a similar problem. Bought the phone in the States so I'm not in a position to go into psychological warfare with some poor high school kid working in Best Buy. Plus, all this is totally my fault...
I dropped my phone down the can (if it was a Blackberry I would have flushed) and manged to rescue it through handy desiccant (open shoe box gel packets) and rediscovering religion *cough* until this is sorted *cough*.
When I eventually fired her back up (the battery had flatlined btw) I'm stuck on the Google screen. So battle commenced...
The phone was stock 2.3.4, never rooted, no CW Recovery.
T-Mobile I9020T.
I sorted the Win 7 USB device issue
Can see it with fastboot but not adb.
Can access the bootloader screen so tried the Recovery option but it just goes into Google splash screen each time.
Flashed various versions of CW recovery (herring, mecha) to it but hitting the Recovery menu on the bootloader screen just keeps going to the Google splash screen.
This is where I complicated things because I'm a complete and utter noob to the rooting game.
I'm fairly sure I was careless early on with the appropriate versions of the full stock and singular recovery images I was trying to flash, so this might be useful information.
I downloaded ODIN and tried it briefly but it didn't seem to recognise my phone (I keep reading the ODIN needs to be tricked into recognising the phone). I also keep reading the ODIN is unnecessary if you have fastboot access so let this line of inquiry slide.
I downloaded a full Clockwork Mod Stock Nandroid (Stock-GRH78-Nandroid) and attempted to flash it all. The boot img failed due to a "FAILED exceed blocks" problem, so I tried this (classic noob try anything):
"Got a failure when trying to flash back a 8Mb boot.img?
From example above I started from a boot.img smaller than the full boot partition but if you create a new boot.img or start from an image of the full partition taken manually or with clockworkmod, boot.img will be 8Mb-large (8388608) and fastboot fails with "FAILED exceed blocks 0x00000020 > 0x0000001e".
I'm not really sure about what size the file should be but as it's filled with zeroes till reaching 8Mb, I decided to cut it:
0x00000020 => 0x0000001e means for me 8388608 / 0x20 * 0x1e = 7864320, so I did:
dd if=boot.img of=boot2.img bs=262144 count=30
fastboot flash boot boot2.img"
Click to expand...
Click to collapse
This worked! noob W1NNAR!!!11one111!!
I got the same thing with the recovery and the same "trick" worked. When it got around to the system img it eventually failed with a "Magic number" problem. Checking this problem out made me realise I can't keep messing around and should "get help".
As a further note I'm aware that the recovery can get flashed each time to stock after a reboot so I've been flashing CW Recovery and then trying to boot into Recovery straight away. Still getting stuck on the Google Splash screen.
I haven't found anyone with my problem that couldn't get sorted with CW so I'm either completely boned or missing something ridiculously easy. Been trying things for over a week - I'm getting close to selling her for scrap.
Have you turned S-Off?
-Remember, Android hell is a real place and you will be sent there at the first sign of defiance-
hand_of_henry said:
As a further note I'm aware that the recovery can get flashed each time to stock after a reboot so I've been flashing CW Recovery and then trying to boot into Recovery straight away. Still getting stuck on the Google Splash screen.
I haven't found anyone with my problem that couldn't get sorted with CW so I'm either completely boned or missing something ridiculously easy. Been trying things for over a week - I'm getting close to selling her for scrap.
Click to expand...
Click to collapse
Do "fastboot erase recovery" then flash a different ClockworkMod build. Try 3.0.2.4
Sent from my Nexus S using XDA App
Thanks Matt.
Just tried erasing (hadn't before) and flashing 3.0.2.4 - no dice. Tried erasing and 3.0.2.5 and no luck either.
twitch153 said:
Have you turned S-Off?
-Remember, Android hell is a real place and you will be sent there at the first sign of defiance-
Click to expand...
Click to collapse
Maybe I'm missing a blindingly obvious step.
My exact steps are:
Starting phone into bootloader screen (Volume + Up)
Erasing the recovery (as of Mike's post above)
Flashing the recovery (ensuring the recovery file is named "recovery.img")
On success of that selecting the Recovery menu item.
Each time I get Google Splash screen.
hand_of_henry said:
Maybe I'm missing a blindingly obvious step.
My exact steps are:
Starting phone into bootloader screen (Volume + Up)
Erasing the recovery (as of Mike's post above)
Flashing the recovery (ensuring the recovery file is named "recovery.img")
On success of that selecting the Recovery menu item.
Each time I get Google Splash screen.
Click to expand...
Click to collapse
Try to use fastboot to go into recovery directly instead of flashing recovery and choosing it from the bootloader menu.
"fastboot boot recovery.img" and see how this goes.
Edit: try this recovery as well
http://forum.xda-developers.com/showthread.php?t=988686
Sent from my Nexus S using XDA Premium App
How long do you wait on the splash screen? I recall this happening to me once but I thinkbi just let it sit and recovery eventually showed up after a while.
Sent from my Nexus S using XDA App
asafru said:
Try to use fastboot to go into recovery directly instead of flashing recovery and choosing it from the bootloader menu.
"fastboot boot recovery.img" and see how this goes.
Edit: try this recovery as well
http://forum.xda-developers.com/showthread.php?t=988686
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
Thanks asafru,
I tried booting into recovery but again, no luck. I did it with one of the recovery builds you suggested (the cyan recovery but having trawled that thread I'm not sure what the difference is between the colours).
matt2053 said:
How long do you wait on the splash screen? I recall this happening to me once but I thinkbi just let it sit and recovery eventually showed up after a while.
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
That's a fair point - I had expected to see the recovery screen fairly sharpish.
I've waited 15 minutes now on the splash screen for flashings of cw 3.0.2.4, 3.0.2.5 and the mysterious cyan build of 4.0.0.2.
I imagine this is an appropriate amount of time for the recovery to kick in?
I've tried all these recoveries using the Recovery menu item and also using the booting directly recovery method that asafru suggests above.
SO i think I totally bricked my phone. Any input would be great. MMy phone boots up and is stuck on lg screen. I tried flash CWM and stock recovery but nothing. Any ideas or should i just send back and get a new one
I really mucked this one up
It's not a brick if it turns on! But I'm fairly new to this phone and I'm not familiar with it at all Normally I would suggest to fastboot flash the new OFFICIAL CWM recovery image, but I don't even know where to begin with fastboot on this phone
chillwillo9 said:
SO i think I totally bricked my phone. Any input would be great. MMy phone boots up and is stuck on lg screen. I tried flash CWM and stock recovery but nothing. Any ideas or should i just send back and get a new one
I really mucked this one up
Click to expand...
Click to collapse
It would probably be a little helpful (if you want help) if you let everyone know what you were doing when you "bricked" your phone. That way people know where to start in assisting you.
chillwillo9 said:
SO i think I totally bricked my phone. Any input would be great. MMy phone boots up and is stuck on lg screen. I tried flash CWM and stock recovery but nothing. Any ideas or should i just send back and get a new one
I really mucked this one up
Click to expand...
Click to collapse
I had a infinite loop problem on mine. I just restored to stock.
Turn phone off (pull battery if needed)
Turn on while holding volume down + power button
chillwillo9 said:
SO i think I totally bricked my phone. Any input would be great. MMy phone boots up and is stuck on lg screen. I tried flash CWM and stock recovery but nothing. Any ideas or should i just send back and get a new one
I really mucked this one up
Click to expand...
Click to collapse
What happens when you try to boot into recovery mode?
OK here is what I did to brick my device.
I wanted to do a factory reset and I used clockwork recovery to do so.
Wat I didn't know what that Clockwork recovery was going to format my system.
I can only get into fast boot via vol up+vol+down+power
Cannot get back to stock recovery or CWM. Tried flashing via fastboot method
My phone just goes to LG screen no loading bar
Currently the only function is fastboot
Did you try formatting via Vol-Down + Power?
xenoletum said:
Did you try formatting via Vol-Down + Power?
Click to expand...
Click to collapse
Yes I did but same result stuck Lg screen no loading bar.
Capacitive touch also are not lit appear to be not working
1) Fastboot flash the official CWM recovery image
2) download http://forum.xda-developers.com/showthread.php?t=1048274
3) put the NANDROID in the correct folder on your sdcard: /sdcard/_ExternalSD/clockworkmod/backup/
4) restore via recovery
Thanks for everyones input, Called t-mobile they are shipping a new one out asap. I'm just going to have to suck it up till tuesday.
I love trial and error they only thing i lost is a little time
omarsalmin said:
1) Fastboot flash the official CWM recovery image
2) download http://forum.xda-developers.com/showthread.php?t=1048274
3) put the NANDROID in the correct folder on your sdcard: /sdcard/_ExternalSD/clockworkmod/backup/
4) restore via recovery
Click to expand...
Click to collapse
I flashed official CWM recovery image numerous times via fastboot and phone just gets stuck at lg screen. Once again vol up+power and vol down+pwer does nothing
Is there another fastboot method or adb method to restore CWM?
did the same thing it bricked my phone does nothing else than start up then freezes. f-ING pissed
The best thing with Nvidia phones and tablets is that its barely impossible to brick your phone. If you think you bricked it - you just need NV flash and either the stock rom or stock recovery and you are back to normal
I have done that with my old G-tablet - it was a piece of cake to fix it.
is there an nv flash for mac?
thought i did the same thing!
if you can get it into format hit the home button. hopefully vol+down+power will get you there. pull your battery and you may just get lucky if done enough times? i would keep trying. good luck
So, today I trade my HTC One for a RAZR XT925, $350, and a water proof 32GB Sandisk ultra sd card on Kijiji. I thought it was kinda weird to get all of this stuff, but it seemed fine at the time. Afterwards however, I found out that every time you turn off or reboot the phone, it tried to go into recovery mode or something with the android guy and a bar at the bottom in a loop and always factory reset the phone, so no matter what, every time you turned it off, it'd reset it. After hours and hours of work, I have the bootloader unlocked, rooted, CWM installed, and Cynogenmod also installed. It no longer factory resets it (I think, but i sent a text to a random number and when I rebooted it was still there), however, everytime i power off and power on, it goes into recovery mode. This is very annoying and will make it very hard to sell again, but if I can fix this last thing, I'll have a solid phone until the waterproof S4 comes out as well as having made like $100.
So basically, I need to know what to do to make it boot into the rom by default and not the recovery. Also, I searched it up and someone else had a problem where they kept booting into AP fastboot mode I think, I tried that line, it said successful, but it didnt work. For me, it's booting into the recovery by default.
Does it boot into stock recovery?
Sent from my Galaxy Nexus using xda premium
recovery
jmcdonald58 said:
Does it boot into stock recovery?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I root it, unlocked the boot loader, flashed cwm recovery, and installed CyanogenMod. Now it boots into cwm recovery by default and if I click reboot system now, it just boots back into cwm. Only way to get to the system is to go to the boot menu by pressing all three buttons and selecting boot normally.
Stock recovery is gone. Cwm asked to replace it so that the phone doesn't reinstall it on reboot. Cwm doesn't, but when the phone booted it stock recovery, it used to get wiped.
roguezz said:
I root it, unlocked the boot loader, flashed cwm recovery, and installed CyanogenMod. Now it boots into cwm recovery by default and if I click reboot system now, it just boots back into cwm. Only way to get to the system is to go to the boot menu by pressing all three buttons and selecting boot normally.
Stock recovery is gone. Cwm asked to replace it so that the phone doesn't reinstall it on reboot. Cwm doesn't, but when the phone booted it stock recovery, it used to get wiped.
Click to expand...
Click to collapse
Strange If it was me I would try a toolkit and redo the whole process something went wrong somewhere wish I could help Good Luck
recovery
jmcdonald58 said:
Strange If it was me I would try a toolkit and redo the whole process something went wrong somewhere wish I could help Good Luck
Click to expand...
Click to collapse
No the problem was in stock. When I got it it wasn't rooted or anything, rooting helped fix the problem partially by not making it wipe every time I boot it. Now the only problem is that whenever I boot it up after a shut down or restart, it boots into recovery mode instead of the ROM.
roguezz said:
No the problem was in stock. When I got it it wasn't rooted or anything, rooting helped fix the problem partially by not making it wipe every time I boot it. Now the only problem is that whenever I boot it up after a shut down or restart, it boots into recovery mode instead of the ROM.
Click to expand...
Click to collapse
did you ever find a solution for this? I just bought a used phone and am facing the same problem - I can't even boot into recovery, it will just start bootlooping again. Only thing that seems to be working is fastbood mode. (or regular reboot, but then everything is wiped every time)
coldtech said:
did you ever find a solution for this? I just bought a used phone and am facing the same problem - I can't even boot into recovery, it will just start bootlooping again. Only thing that seems to be working is fastbood mode. (or regular reboot, but then everything is wiped every time)
Click to expand...
Click to collapse
Fastboot the stock ROM. That should return the phone to it's bone stock condition.
Sent from my DROID RAZR HD using Tapatalk 4
mentose457 said:
Fastboot the stock ROM. That should return the phone to it's bone stock condition.
Sent from my DROID RAZR HD using Tapatalk 4
Click to expand...
Click to collapse
trying right now. RSDLite is giving me an "unknown fastboot command getvar" error...still trying to figure out why.
coldtech said:
trying right now. RSDLite is giving me an "unknown fastboot command getvar" error...still trying to figure out why.
Click to expand...
Click to collapse
I wouldnt mess with RSDLite. Google gave us fastboot for a reason.
mentose457 said:
I wouldnt mess with RSDLite. Google gave us fastboot for a reason.
Click to expand...
Click to collapse
is there an alternative to flash the stock ROM on a locked device?
coldtech said:
is there an alternative to flash the stock ROM on a locked device?
Click to expand...
Click to collapse
Use this utility: http://forum.xda-developers.com/showthread.php?t=2241788
Use the 'Lite' version as it includes the stock rom.
mentose457 said:
Use this utility: http://forum.xda-developers.com/showthread.php?t=2241788
Use the 'Lite' version as it includes the stock rom.
Click to expand...
Click to collapse
Thanks for the hint, will give it a try. RSDLite just completed flashing, but the odd behaviour of the phone is still the same. Guess I might just have a broken phone... :/
mentose457 said:
Use this utility: http://forum.xda-developers.com/showthread.php?t=2241788
Use the 'Lite' version as it includes the stock rom.
Click to expand...
Click to collapse
After a few hours, I (somehow) ended up being able to enter recovery. On the downside though, now it always goes automatically into fastboot, because everything seems to be screwed up. I even got CWM installed though (unlocked the device because I didn't know what else to do).
Now every time it goes into fastboot, the reason given is: "sticky bit fastboot"
Any ideas left?
Oh btw, I have a german phone, in case that matters somehow. I can't flash in any fastboot way anymore, now I always get some message about a downgraded version. Of course details can be supplied if needed.
edit: was now able to flash CM, no idea what I did so that it didn't give me errors anymore. It still goes into fastboot by default on every reboot though, I always need to select "reboot device" manually every time.
coldtech said:
After a few hours, I (somehow) ended up being able to enter recovery. On the downside though, now it always goes automatically into fastboot, because everything seems to be screwed up. I even got CWM installed though (unlocked the device because I didn't know what else to do).
Now every time it goes into fastboot, the reason given is: "sticky bit fastboot"
Any ideas left?
Oh btw, I have a german phone, in case that matters somehow. I can't flash in any fastboot way anymore, now I always get some message about a downgraded version. Of course details can be supplied if needed.
edit: was now able to flash CM, no idea what I did so that it didn't give me errors anymore. It still goes into fastboot by default on every reboot though, I always need to select "reboot device" manually every time.
Click to expand...
Click to collapse
Sounds like you are able to use the phone. That’s good.
The error is saying it can’t downgrade the trust zone (tz) right? That is normal for a phone with an unlocked bootloader. You can simply ignore that.
The sticky bit fastboot problem looks like it can be fixed by issuing this command while in fastboot mode: fastboot oem fb_mode_clear
mentose457 said:
Sounds like you are able to use the phone. That’s good.
The error is saying it can’t downgrade the trust zone (tz) right? That is normal for a phone with an unlocked bootloader. You can simply ignore that.
The sticky bit fastboot problem looks like it can be fixed by issuing this command while in fastboot mode: fastboot oem fb_mode_clear
Click to expand...
Click to collapse
the fb_mode_clear was the culprit, thanks a lot!
and the error says: "downgraded security version. update gpt_main version failed. preflash validation failed for GPT" - which is still keeping me from flashing stuff via fastboot.
since I can't fastboot flash at the moment: do you happen to know where I can get the german modem image so that I can flash it using CWM? I think through all the flashing and trying I have a corrupt or wrong modem file (probably the US version). I can not log into the carrier network right now. it asks me for my SIM PIN and unlocks the SIM, but that's it. so I can't make phone calls or anything right now.
Hello,
Earlier today I installed BAKED ROM on my AT&T HTC ONE XL that was at the time running CM 10.1 After having some issues with wifi not working I decided to restore from my backup made in CWR when installing CM 10.1 on my phone. After the restore finished i was stuck in a bootloop. So i went back into CWR to re install the BAKED ROM. Once i cleared drive i came to realize that i somehow deleted the .zip files for the ROM on my phone and no longer had a ROM to install. After that i decided that I would mount my phone from CWR so i can transfer the .zip to my phone and then install. After realizing i need to use TWRP to be able to mount and transfer files i was going to flash over TWRP in fastboot. My issue currently is that my phone is powered off after telling it to shutdown in bootloader, and i can not get it to turn back on or to boot into bootloader so that i can flash TWRP. Hopefully i am missing something small here. Any advise is appreciated.
Thank You
coltp10 said:
Hello,
Earlier today I installed BAKED ROM on my AT&T HTC ONE XL that was at the time running CM 10.1 After having some issues with wifi not working I decided to restore from my backup made in CWR when installing CM 10.1 on my phone. After the restore finished i was stuck in a bootloop. So i went back into CWR to re install the BAKED ROM. Once i cleared drive i came to realize that i somehow deleted the .zip files for the ROM on my phone and no longer had a ROM to install. After that i decided that I would mount my phone from CWR so i can transfer the .zip to my phone and then install. After realizing i need to use TWRP to be able to mount and transfer files i was going to flash over TWRP in fastboot. My issue currently is that my phone is powered off after telling it to shutdown in bootloader, and i can not get it to turn back on or to boot into bootloader so that i can flash TWRP. Hopefully i am missing something small here. Any advise is appreciated.
Thank You
Click to expand...
Click to collapse
hold the power button down for about 15 seconds. wait for 5 seconds, then press the power button and volume down at the same time after a few seconds you should get the bootloader screen.
does the led come on when you're charging it?
cr1960 said:
hold the power button down for about 15 seconds. wait for 5 seconds, then press the power button and volume down at the same time after a few seconds you should get the bootloader screen.
does the led come on when you're charging it?
Click to expand...
Click to collapse
Thank you for your response. From following your instructions i was still not able to get into bootloader, and when i plug it in to charge the LED does not come on
coltp10 said:
Thank you for your response. From following your instructions i was still not able to get into bootloader, and when i plug it in to charge the LED does not come on
Click to expand...
Click to collapse
Sadly based on my knowledge and experience(I learned this the hard way by taking the ATT OTA) if the led doesn't come on while charging and you cant access your bootloader your phone is sadly dead. However you can double check to see if its your cord and if it is not then call HTC if device is still under warranty. They replaced the internals of mine and recieved it back at no charge.
If I have helped in any way hit the Thanks button please.
Why did you "need" to go to TWRP to mount SD? Clockworkmod has had SD mount fixed for some time now, hasn't it?
Leave the phone on wall charger (not connected to computer) overnight or 8 Hrs or so, and see if you get any LED's or can get into bootloader. If you were only messing with ROMs and recovery, I don't see how you can be bricked (as long as anything you were trying to flash was for the EVITA). The battery may just have run down while you were messing with the device.
redpoint73 said:
Why did you "need" to go to TWRP to mount SD? Clockworkmod has had SD mount fixed for some time now, hasn't it?
Leave the phone on wall charger (not connected to computer) overnight or 8 Hrs or so, and see if you get any LED's or can get into bootloader. If you were only messing with ROMs and recovery, I don't see how you can be bricked (as long as anything you were trying to flash was for the EVITA). The battery may just have run down while you were messing with the device.
Click to expand...
Click to collapse
Well when i went into clockworkmod and told it to mount SD it did not work, i have all of my drivers installed properly so it couldn't be a driver issue. So i figured that i would just flash over TWRP and use mount to usb as a second shot. I will have to try and leave it plugged in later after work. Yes the ROM that i installed was for the EVITA, it was running fine except the wifi wouldnt turn on.
coltp10 said:
Well when i went into clockworkmod and told it to mount SD it did not work, i have all of my drivers installed properly so it couldn't be a driver issue.
Click to expand...
Click to collapse
If/when you get back up and running, if still on CWM, make sure its up to date. I think the SD mount was fixed quite some time ago.
redpoint73 said:
If/when you get back up and running, if still on CWM, make sure its up to date. I think the SD mount was fixed quite some time ago.
Click to expand...
Click to collapse
Okay thanks for the input i will check it out as soon as I am able
When i came home from work and plugged it in the red LED light came on. After letting it charge for about 5 hours i tried to access the bootloader by pressing power down for 15 seconds, then waiting 5, and then power and volume down, to no result. Only when holding down power for the first 15 seconds the soft on screen keys did flash
coltp10 said:
When i came home from work and plugged it in the red LED light came on. After letting it charge for about 5 hours i tried to access the bootloader by pressing power down for 15 seconds, then waiting 5, and then power and volume down, to no result. Only when holding down power for the first 15 seconds the soft on screen keys did flash
Click to expand...
Click to collapse
After holding the power button down and let the capacitive keys flash 6 times. The 6 flashes means a hard reset and it's about to start rebooting. Let go of the power button and immediately hold volume down. It should take you into the bootloader. Then you can fastboot flash TWRP.
Sent from my HTC One X using Tapatalk 2
Thank you
Finally after letting it charge all night, i was able to access my bootloader, i flashed over TWRP and am in the process of mounting my sd to transfer the rom and hopefully install. Thank you all for you help!!
coltp10 said:
Finally after letting it charge all night, i was able to access my bootloader, i flashed over TWRP and am in the process of mounting my sd to transfer the rom and hopefully install. Thank you all for you help!!
Click to expand...
Click to collapse
Good luck
Sent from my HTC One X using xda premium
Well i was able to install cm 10.1 back to my phone and successfully load it, my only issue now as before when i installed the BAKED rom, is my wifi doesn't seem to work or recognize any networks
coltp10 said:
Well i was able to install cm 10.1 back to my phone and successfully load it, my only issue now as before when i installed the BAKED rom, is my wifi doesn't seem to work or recognize any networks
Click to expand...
Click to collapse
Glad you got it working.
What hboot are you on? If you are on one of the newer ones, not 1.09, and don't have s-off you have to manually flash the boot.img through fastboot after installing the ROM. That sounds like it might be your issue.
pside15 said:
Glad you got it working.
What hboot are you on? If you are on one of the newer ones, not 1.09, and don't have s-off you have to manually flash the boot.img through fastboot after installing the ROM. That sounds like it might be your issue.
Click to expand...
Click to collapse
Agreed, i did forget to flash to boot image during my excitement to a working phone again, even so, if i hadn't flashed the boot image why is it that my phone was actually able to start up the rom and go through phone system setup?
coltp10 said:
Agreed, i did forget to flash to boot image during my excitement to a working phone again, even so, if i hadn't flashed the boot image why is it that my phone was actually able to start up the rom and go through phone system setup?
Click to expand...
Click to collapse
because the rom you flashed is based on CM so it was compatible enough to boot but not have everything working as it should. if you don't flash the boot.img, the previously used kernel would still be used.
The ROM was running and i was able to use my phone. Then i flashed over the boot.img for my rom and now it doesnt boot up it is stuck at the Cyanogen Mod loading screen
coltp10 said:
The ROM was running and i was able to use my phone. Then i flashed over the boot.img for my rom and now it doesnt boot up it is stuck at the Cyanogen Mod loading screen
Click to expand...
Click to collapse
boot to recovery, wipe everything (cache, dalvik, system, factory reset), reflash the rom you want to use, then reboot to bootloader and fastboot flash boot boot.img extracted from the rom you just flashed.
Not sure where you went wrong but that will get you booting. To avoid having to fastboot flash boot boot.img everytime, you can S-OFF.
exad said:
boot to recovery, wipe everything (cache, dalvik, system, factory reset), reflash the rom you want to use, then reboot to bootloader and fastboot flash boot boot.img extracted from the rom you just flashed.
Not sure where you went wrong but that will get you booting. To avoid having to fastboot flash boot boot.img everytime, you can S-OFF.
Click to expand...
Click to collapse
I will have to look into the S-OFF. As of right now i wiped everything, installed rom, installed gaps, went to bootloader flashed boot.img and now just waiting to see if it will start up
coltp10 said:
I will have to look into the S-OFF. As of right now i wiped everything, installed rom, installed gaps, went to bootloader flashed boot.img and now just waiting to see if it will start up
Click to expand...
Click to collapse
You can also use the flash image GUI app to flash a boot image in Android right before you boot to recovery to flash the ROM. But I would definitely look into s-off. It's a very easy process and then you don't ever have to worry about the boot.img at all.
I was trying to fix my girlfriends nexus 5 that was doing the restart loop after an update. Everything seemed to go fine. Unlocked the bootloader, etc. Flashed the newest rom (6.0.1 (MMB29S) ce1d670f61061c3902f3997510ea55d7 6bfcdfa4f4840898e5d76fa044f5e6a0f71343bf) and then something obviously went wrong (not quite sure, dont think i touched anything) and it's now stuck in a different kind of loop that only loops while it's plugged in. Ive uploaded a video to youtube, but since im a new user i cant actually link it properly yet. Hopefully this wont annoy any mods, I promise it's not spam. youtube . be / yNSoiTPnGZw
Is there any way to get it to stay on for more than a couple seconds to retry the flashing?
Any help is appreciated.
atomkrieg said:
I was trying to fix my girlfriends nexus 5 that was doing the restart loop after an update. Everything seemed to go fine. Unlocked the bootloader, etc. Flashed the newest rom (6.0.1 (MMB29S) ce1d670f61061c3902f3997510ea55d7 6bfcdfa4f4840898e5d76fa044f5e6a0f71343bf) and then something obviously went wrong (not quite sure, dont think i touched anything) and it's now stuck in a different kind of loop that only loops while it's plugged in. Ive uploaded a video to youtube, but since im a new user i cant actually link it properly yet. Hopefully this wont annoy any mods, I promise it's not spam. youtube . be / yNSoiTPnGZw
Is there any way to get it to stay on for more than a couple seconds to retry the flashing?
Any help is appreciated.
Click to expand...
Click to collapse
What was your flashing procedure, did u is a toolkit or do it manually, can u get it into bootloader or recovery? What files did u is for update and where did u get them?
Sent from my XT1526 using Tapatalk
soupysoup said:
What was your flashing procedure, did u is a toolkit or do it manually, can u get it into bootloader or recovery? What files did u is for update and where did u get them?
Sent from my XT1526 using Tapatalk
Click to expand...
Click to collapse
First i followed the guide here on xda to unlock the bootloader(guide-nexus-5-how-to-unlock-bootloader-t2507905), installed twrp, which went fine. Then i realized that i couldnt (or didnt realize how to via command line) to copy the stock rom and install it via twrp, so then i followed this guide here on xda (tutorial-how-to-flash-factory-image-t2513701) with the factory img (6.01 hammerhead), got to this point in the guide: ★After everything finished, select "Recovery" using the volume buttons. then it stalled out,turned off and now just cycles on and offf through the google logo with the lock picture or if i hold down the volume button it will go into the bootloader briefly then restart, rinse repeat.
atomkrieg said:
First i followed the guide here on xda to unlock the bootloader(guide-nexus-5-how-to-unlock-bootloader-t2507905), installed twrp, which went fine. Then i realized that i couldnt (or didnt realize how to via command line) to copy the stock rom and install it via twrp, so then i followed this guide here on xda (tutorial-how-to-flash-factory-image-t2513701) with the factory img (6.01 hammerhead), got to this point in the guide: ★After everything finished, select "Recovery" using the volume buttons. then it stalled out,turned off and now just cycles on and offf through the google logo with the lock picture or if i hold down the volume button it will go into the bootloader briefly then restart, rinse repeat.
Click to expand...
Click to collapse
Have u tried messing with the power button, there are a lot of issues on the nexus 5 with the power button causing loops, simply from getting stuck, try playing with the power button a little and see of that helps, it might just need to be replaced
Wait, did u flash the factory img with twrp, or did u flash it using fastboot?
Sent from my XT1526 using Tapatalk
soupysoup said:
Have u tried messing with the power button, there are a lot of issues on the nexus 5 with the power button causing loops, simply from getting stuck, try playing with the power button a little and see of that helps, it might just need to be replaced
Wait, did u flash the factory img with twrp, or did u flash it using fastboot?
Sent from my XT1526 using Tapatalk
Click to expand...
Click to collapse
in the end fastboot, since i coulndt see how i could copy the img over to install via twrp
im pretty sure the button is fine, since it was cycling from the ota update install, then was working fine unlocking the bootloader, but after the flash, it crapped the bed.
Different problem
I had a problem where the google logo keeps on booting up with a slight vibration.This started to happen when my was dropped.I initially thought that was a software issue and thought of installing new ROM's but eventually my device was not detected :crying:
So i took it to repair shop near my house and they said it would cost 2500
I did some google research and found the reason was due to the power button being stucked during the fall.I got that repaired and my device is good to go
siddhu007 said:
I had a problem where the google logo keeps on booting up with a slight vibration.This started to happen when my was dropped.I initially thought that was a software issue and thought of installing new ROM's but eventually my device was not detected :crying:
So i took it to repair shop near my house and they said it would cost 2500
I did some google research and found the reason was due to the power button being stucked during the fall.I got that repaired and my device is good to go
Click to expand...
Click to collapse
ok, took it into a shop, got the power button fixed. It must have been on the way out because literally one minute it worked and the second it didnt. now i think ive got it narrowed down. it's saying it's unable to mount /persist. ive tried the various fixes:
e2fsck/dev/block/platform/msm_sdcc.1/by-name/persist
and
make_ext4fs/dev/block/platform/msm_sdcc.1/by-name/persist
but all i get is a not found error. not sure what to do from here on.
success!! i ended up stumbling on a bit how to restore the persist partition i didnt try. got a custom rom installs and everything works. thanks to everyone who tried to help!!
stuck in bootloop while flashing cataclysm rom
i tried to flash cataclysm rom in my n5..i unlock bootloader, flash custom recovery using TWRP and flash cataclysm rom following the instructions in this thread http://forum.xda-developers.com/goo...s-5-how-to-unlock-bootloader-t2507905...after that it was stuck in bootloop...i tried to open recovery but it wont open anymore it will only go back to loop....how can open the recovery? is it safe to flash CWM recovery?..tnx in advance..
When it was stuck in the loop, I had to hold vol up and down with the power button (wait a few secs until it was completely off) then reboot holding down + power till it opened the bootloader. if that doesnt work, try reflashing the bootloader via fastboot. I only found out i couldnt mount the persist partition by looking at the terminal window in twrp after trying to install a rom which kept it in the boot loop. I then used the cmd: make_ext4fs /dev/block/platform/msm_sdcc.1/by-name/persist to rebuild it.
jpau11 said:
i tried to flash cataclysm rom in my n5..i unlock bootloader, flash custom recovery using TWRP and flash cataclysm rom following the instructions in this thread http://forum.xda-developers.com/goo...s-5-how-to-unlock-bootloader-t2507905...after that it was stuck in bootloop...i tried to open recovery but it wont open anymore it will only go back to loop....how can open the recovery? is it safe to flash CWM recovery?..tnx in advance..
Click to expand...
Click to collapse
After flashing TWRP, use the volume and power button to select recovery. Once in TWRP, wipe cache, data, reboot.
audit13 said:
After flashing TWRP, use the volume and power button to select recovery. Once in TWRP, wipe cache, data, reboot.
Click to expand...
Click to collapse
problems solved!!i flashed TWRP again and it it already to the recovery so i reflashed the cataclysm rom and it worked...my n5 is now working..tnx guys!
jpau11 said:
problems solved!!i flashed TWRP again and it it already to the recovery so i reflashed the cataclysm rom and it worked...my n5 is now working..tnx guys!
Click to expand...
Click to collapse
Great to hear it. Congratulations:good: