Hi Folks,
I'm trying to port B2G to my moto g3. I was referring to this doc (https://developer.mozilla.org/en-US/docs/Archive/B2G_OS/Porting_B2G_OS/basics). However some of the things mentioned in this doc are not clear to me. Could you please help me with the below issue.
I'd like to build the AndroidKernel from source. So where should I include the below lines? Is it in this file?
https://github.com/LineageOS/android_device_motorola_osprey/blob/cm-14.1/rootdir/etc/init.target.rc
HTML:
on early-init
start ueventd
import /init.b2g.rc
Also if I understood correctly. building the kernel from source doesn't require to unpack , edit the init.rc file and repack the kernel from the device. Could you please confirm this?
Thanks,
Arun
Hi Arun,
I totally understand your frustration with this. You'd like to contribute to the Servonk project but first you need to port B2G to your phone or buy a new phone. Since the only other supported phones are the Z3 compact and Nexus 5, both of which are still relatively expensive secondhand, you want to use your Moto G3 which means first porting B2G to it.
So, I think there are two options you have:
1. Port direct from the AOSP code
2. Port from the CM12 code.
As Gerard said in telegram, porting from CM to B2G was never finalised so may actually require more work. However there may actually be more people here who can help you since people seem more familiar with CM than AOSP (in general, I know some people are very knowledgeable in both).
I see you've posted in the AOSP 7.1.1 kernel thread. Unfortunately, for the Servonk project you currently need a Lollipop based build, so 5.x AOSP kernel or CM12.x.
It might be worth asking a mod to move this thread into one of the development sub-forums.
As you know, this is the limit of my knowledge, but I really hope you find some success, if would be great if you could contribute to the Servonk project.
Your last option is to use the desktop build of Servonk, based on Glutin instead of Gonk, but I understand that you really want to get Servonk working on your phone.
Best of luck
Hi guys, after 1 year,XZP still don't have LOS or other rom based los, just hava a Carbon ROM…
So can someone explain?
I really hope that XZP will have LOS…:crying::crying:
In theory(Not sure), on Carbon's maple open source code, a little modification can compile lineageos, but currently no one is doing it, maybe using Sony's third-party ROM and too few third-party developers, leading to the development of the original Android development slow.
（By the way, I had an idea last year, syncing some open source projects back, building a third-party ROM for my Xperia Z5 at the time, intending to use Carbon's already open source sumire code to compile other ROMs. Since I don't have any knowledge about modifying the code, I just want to try the fun of building ROM. Finally, because of the problems of the Chinese network, I gave up. .
LineageOS (Lineage Android Distribution) members or anyone else on this website is not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Your warranty will be void if you tamper with any part of your device / software.
How to Install:
1- Make a backup of your important files
2 - Unlock bootloader with this guide
3 - Flash the TWRP, link here
4 - Move Rom & Gapps (optional) into device storage
5 - Full Wipes
6- Flash Rom & Gapps (gapps are OPTIONAL)
for GAPPS:
Choose Gapps Package ARM64 > 7.1 > Micro and below: visit OpenGAPPS
If during the gapps flash it gives you an error then in the TWRP terminal or on the adb shell you have to execute this command: "mkdir /tmp/bin"
Download:
Releases · XRedCubeX/android_device_meizu_m5c
Contribute to XRedCubeX/android_device_meizu_m5c development by creating an account on GitHub.
github.com
Working:
Boots
Storages
Bluetooth
Wifi
GPS - GNSS
Audio
NOT Working:
Camera
Hotspot
Offline Charging
Special Thanks
LineageOS
Moyster for device trees
Device Tree:https://github.com/XRedCubeX/android_device_meizu_m5c
Vendor Tree: https://github.com/XRedCubeX/android_vendor_meizu_m5c
Assim que possível, irei testar!
Hi Red. I was taking a look at the ROM repository on GitHub, and saw that the default branch is now named cm-13.1. So, are you now working on an Android 6.0 ROM for the M5c?
thiagosousa777 said:
Hi Red. I was taking a look at the ROM repository on GitHub, and saw that the default branch is now named cm-13.1. So, are you now working on an Android 6.0 ROM for the M5c?
Click to expand...
Click to collapse
I have a slight indecision, now I can not carry on the Custom ROM because I do not have the right PC but when I am able to compile it, I will evaluate which one can work better
XRed_CubeX said:
I have a slight indecision, now I can not carry on the Custom ROM because I do not have the right PC but when I am able to compile it, I will evaluate which one can work better
Click to expand...
Click to collapse
I see. I would say that in the long run Lineage 14 would be more worthwhile, since Android 6.0 is becoming outdated, with no support for some apps. But really, I just wanted a ROM to replace Flyme, and its bugs. Also, many of the apps I use don't work, or don't work right on Flyme...
These days I was taking a look at /e/ OS. I've been thinking about venturing into porting this ROM to the M5c. For me it would be a challenge, since I've never done this before. But unfortunately at the moment I also don't have a PC that meets the requirements to compile the ROM
thiagosousa777 said:
I see. I would say that in the long run Lineage 14 would be more worthwhile, since Android 6.0 is becoming outdated, with no support for some apps. But really, I just wanted a ROM to replace Flyme, and its bugs. Also, many of the apps I use don't work, or don't work right on Flyme...
These days I was taking a look at /e/ OS. I've been thinking about venturing into porting this ROM to the M5c. For me it would be a challenge, since I've never done this before. But unfortunately at the moment I also don't have a PC that meets the requirements to compile the ROM
Click to expand...
Click to collapse
I find it useless, just use lineage without gapps and it will be better than /e/, then anyway I don't know where to find the manifest
XRed_CubeX said:
I find it useless, just use lineage without gapps and it will be better than /e/, then anyway I don't know where to find the manifest
Click to expand...
Click to collapse
You are right. However, /e/ has some nice features like e account synchronization, an app store, microG, and some of their apps... Of course we could get that with LineageOS, but it is interesting how /e/ already brings that well integrated and ready.
By the way, I am also looking at other non-Android systems, like Ubuntu Touch...
thiagosousa777 said:
You are right. However, /e/ has some nice features like e account synchronization, an app store, microG, and some of their apps... Of course we could get that with LineageOS, but it is interesting how /e/ already brings that well integrated and ready.
By the way, I am also looking at other non-Android systems, like Ubuntu Touch...
Click to expand...
Click to collapse
Ah beautiful those non-android systems yes, unfortunately we have to forget them because of the prebuilt kernel and unavailable sources
XRed_CubeX said:
Ah beautiful those non-android systems yes, unfortunately we have to forget them because of the prebuilt kernel and unavailable sources
Click to expand...
Click to collapse
Well, from what I've been reading the process is similar to porting LineageOS. You just need the kernel sources and the device specific binary blobs. I'm guessing you know how to get them, don't you?
And the interesting thing is that there is a layer, called Halium, that interacts directly with the hardware. And that is actually what you should port to the desired device. Then you can install any Linux system on top of this layer, like Ubuntu Touch, Plasma Mobile, etc, and these are distributed pre-compiled.
thiagosousa777 said:
Well, from what I've been reading the process is similar to porting LineageOS. You just need the kernel sources and the device specific binary blobs. I'm guessing you know how to get them.
And the interesting thing is that there is a layer, called Halium, that interacts directly with the hardware. And that is actually what you should port to the desired device. Then you can install any Linux system on top of this layer, like Ubuntu Touch, Plasma Mobile, etc, and these are distributed pre-compiled.
Click to expand...
Click to collapse
Mhh ... good, you are informed, however the vendor blobs are bull**** to take, the problem is the kernel sources but Meizu has not released them. However, some time ago I booted a Custom kernel based on ALPS (A custom AOSP from Mediatek to be clear) but the touchscreen doesn't work and I'm looking for a solution around but that I can't find
P.S: Fixing that kernel has great potential, forget android 7, you could also boot android 9 with sources, but as long as they are still working
XRed_CubeX said:
Mhh ... good, you are informed, however the vendor blobs are bull**** to take, the problem is the kernel sources but Meizu has not released them. However, some time ago I booted a Custom kernel based on ALPS (A custom AOSP from Mediatek to be clear) but the touchscreen doesn't work and I'm looking for a solution around but that I can't find
P.S: Fixing that kernel has great potential, forget android 7, you could also boot android 9 with sources, but as long as they are still working
Click to expand...
Click to collapse
I confess I didn't quite understand one thing: so how did you port LineageOS to this device? You didn't need the kernel sources?
thiagosousa777 said:
I confess I didn't quite understand one thing: so how did you port LineageOS to this device? You didn't need the kernel sources?
Click to expand...
Click to collapse
At the time I was doing this lineage, I was with the prebuilt kernel, week ago I had done this kernel port to a twrp and the touch was not working so I left the device alone
XRed_CubeX said:
At the time I was doing this lineage, I was with the prebuilt kernel, week ago I had done this kernel port to a twrp and the touch was not working so I left the device alone
Click to expand...
Click to collapse
Thanks for the clarification! It is a shame that Meizu does this (I wonder if they are not violating the terms of the Linux GPL license by distributing the kernel without publishing the modifications made to the source code).
Anyway, if a solution to this kernel problem related to the touch screen comes up, please let me know. In the meantime I'll keep reading Halium's documentation until a solution comes along, or until I get a compatible phone.
Great work!
Hello. I've been testing this ROM on my M5c and love it. The ROM is very good, fluid, lightweight... the only problem is that the camera doesn't work, as well as the cellular network data. Congratulations for the excellent work.
The ROM will no longer receive bugfixes?
pls compile
publish a release
My Question Is How Will the Custom Rom Made From The Aosp Base??
I Really want to learn the Android Custom Rom Development.(Again I'm Telling That I'm Not asking about complier or bulid the rom). I'm asking about the source and how it is made.
I Want To Be a core member.
Giving a Guide To This Question Is Highly Appreciated!!
Thank You Guys
(t.me) is a good place, they use SDK and Android Kitchen etc.
JaswanthTeja said:
My Question Is How Will the Custom Rom Made From The Aosp Base??
I Really want to learn the Android Custom Rom Development.(Again I'm Telling That I'm Not asking about complier or bulid the rom). I'm asking about the source and how it is made.
I Want To Be a core member.
Giving a Guide To This Question Is Highly Appreciated!!
Thank You Guys
Click to expand...
Click to collapse
Custom ROM sources require that the stock source code be made available to the public by the manufacturer/carrier of the device. If the stock source code for a specific device has not been made available to the public, developers can not create custom ROM source code for that specific device. Developers use the stock source code to create the custom ROM source code and then ROMs are built using the custom source they created. I think that is the answer you were really looking for. You want to know how the source code itself that the ROMs are built from is created. You aren't asking about the fruit that comes from the tree, you are asking where the tree that bears the fruit comes from. Am I right?
The only way to get custom ROMs on devices that do not have stock source code made available is to port custom ROMs from a similar device with the same architecture that does have available source code and custom ROMs made for it.
OldNoobOne said:
(t.me) is a good place, they use SDK and Android Kitchen etc.
Click to expand...
Click to collapse
I don't think that is what they are asking.
Droidriven said:
I don't think that is what they are asking.
Click to expand...
Click to collapse
Yeah, I Want To Know About Android Arc
JaswanthTeja said:
Yeah, I Want To Know About Android Arc
Click to expand...
Click to collapse
I answered the question. If you specifically want to know how developers convert stock source code into custom ROM source code, you probably will not find that answer here. Most of the people here work with the stuff that the LineageOS team creates from stock source code after the custom ROM source code has been created, they are not part of the process involved in creating the custom source code. It is like being a construction worker, the construction worker does not create the material that he uses to build a house, someone else creates the materials and then he uses what they created to build a house. Google and the LineageOS team create the material, the developers here use what they created to build the ROMs here.
You should try going to github or the LineageOS website to ask your question.
Droidriven said:
I answered the question. If you specifically want to know how developers convert stock source code into custom ROM source code, you probably will not find that answer here. Most of the people here work with the stuff that the LineageOS team creates from stock source code after the custom ROM source code has been created, they are not part of the process involved in creating the custom source code. It is like being a construction worker, the construction worker does not create the material that he uses to build a house, someone else creates the materials and then he uses what they created to build a house. Google and the LineageOS team create the material, the developers here use what they created to build the ROMs here.
You should try going to github or the LineageOS website to ask your question.
Click to expand...
Click to collapse
cool
I know how to root and install legit custom OS as long as it works on my device. Is there a easier way to make a custom rom through Windows 11?
https://forum.xda-developers.com/t/all-kinds-of-errors-when-flashing-a-rom.4545717/
If you can't figure out these simple errors, how are you planning on building custom ROMs and debugging?
*Just wondering*
I was wondering the same. Building a custom ROM is not an easy task. You should really know the ins and outs of Android to even attempt it. Not knocking you, there are around 10 custom ROMs in just this forum. What would you add or build that isn't already available?
Not that you can't and cannot learn how but as stated above. Building a custom ROM can be quite the undertaking and you have to ask... What can you provide and offer that's not already available?
Firstly you need a decent PC for your build environment. One with plenty of RAM and storage. Ability to run or dual boot Linux and know commands. Can be built in windows environment though.
Secondly you need a device that you're willing to troubleshoot, bootloop, soft brick and or hard brick. Plus know how to recover from the above (hard brick excluded)
If you're willing, it's definitely fun, challenging and can be rewarding. I use to build my own personal ROMs a couple of years ago.
You can look at ROM development from beginning to end here and android kitchen here
Best of luck!!
Building Android | Android Open Source Project
source.android.com
Downloading the Source | Android Open Source Project
source.android.com