Does anyway know if there's anyway to flash T-mobile Nougat update on S7? I know marshmellow can be flashed on verizon S7. Anyway, to flash Nougat?
dhman06 said:
Does anyway know if there's anyway to flash T-mobile Nougat update on S7? I know marshmellow can be flashed on verizon S7. Anyway, to flash Nougat?
Click to expand...
Click to collapse
I flashed the tmo s7 flat files and the verizon csc file took a couple of tries but it worked
---------- Post added at 02:54 AM ---------- Previous post was at 02:52 AM ----------
Go over to verizon forum and fellow how they did it for the s7 edge for verizon. Same order just different files
chuckboy1129 said:
I flashed the tmo s7 flat files and the verizon csc file took a couple of tries but it worked
---------- Post added at 02:54 AM ---------- Previous post was at 02:52 AM ----------
Go over to verizon forum and fellow how they did it for the s7 edge for verizon. Same order just different files
Click to expand...
Click to collapse
How did you find the verizon csc file?
dhman06 said:
How did you find the verizon csc file?[/QUOTE
I used the CSC from ph1 files
Click to expand...
Click to collapse
Hi All,
Does anyone know what G920F Stock Nougat ROMS have VoLTE enabled by default? My preference would be to flash a stock Nougat ROM for this rather then rooting the phone and altering the system/csc/Features.xml file.
I have found a couple of forums on here for enabling VoLTE in India using a France based XEF ROM but i doubt that would be applicable for use in Australia?
Basically if possible my preference would be a non-rooted stock ROM with voLTE enabled so it will work here in Australia and that it has a valid firmware installed (i.e correct CSC PDA version etc for a region) so that it can continue to receive official OTA updates or be updated through Smart Switch.
If there is no other option then i would consider rooting the device.
Thanks in advance.
i could post an official XSA CSC (Nougat G920i) for your G920F to enable you to get volte working without rooting, but you will still not be able to get the official OTA updates.
---------- Post added at 02:35 PM ---------- Previous post was at 02:03 PM ----------
https://mega.nz/#!kN0wQSBI!xyZPkP9hk8wx43ALIKZWjExIn8XWrLlWBgoZ4KQsMrw
farookh said:
i could post an official XSA CSC (Nougat G920i) for your G920F to enable you to get volte working without rooting, but you will still not be able to get the official OTA updates.
---------- Post added at 02:35 PM ---------- Previous post was at 02:03 PM ----------
]
Click to expand...
Click to collapse
Hi, Thanks for the reply. Are you aware of any unbranded G920F regions where VoLTE is enabled in the stock ROM? My preference would be to flash this instead.
As for VoLTE does the service operator require the phone to be a certain CSC in order for VoLTE to be activated or is it simply the fact some G920F ROMs do not have VoLTE enabled by default which would be the reason i cannot use VoLTE with my current Vietnam Nougat ROM?
farookh said:
i could post an official XSA CSC (Nougat G920i) for your G920F to enable you to get volte working without rooting, but you will still not be able to get the official OTA updates.
---------- Post added at 02:35 PM ---------- Previous post was at 02:03 PM ----------
Click to expand...
Click to collapse
I noticed on another XDA forum that you successfully flashed a G920I ROM on the G920F? I understand the modems between these variants are different hardware wise. I'd be happy to flash the full G920I XSA ROM on my G920F if you are confident it would work? Would i need to flash a modem.bin file from a G920F ROM after i flash the G920I ROM to ensure it is compatible with my modem?
If i could do this i'm assuming that the G920F would then look like a G920I XSA phone so i could then have VoLTE working and continue to receive OTA updates?
Or maybe i should just flash the Thailand (THL) Nougat ROM on the phone? i have read it has VoLTE enabled so hopefully my mobile operator here in Australia will allow this to enable VoLTE.
Hey
Did the Thailand firmware (thl) had volte?
If it does have
I wanna flash my g920f
Which CVC version from which country would you recommend to use on the S8+ G955F international version for use with the US carriers?
If possible enabling VoLTE and WiFi Calling.
Using Odin only, NO root, to not trigger Knox.
I've been installing XAA/XAA on my families, friends and my phone/s. ROM is CarHDROM v9. This ROM is a NOTE 8 ROM.
Make sure your CSC is compatible with the 'model' ROM you have on the phone, and not necessarily the stock hardware 'model' of the phone.
JeffDC said:
I've been installing XAA/XAA on my families, friends and my phone/s. ROM is CarHDROM v9. This ROM is a NOTE 8 ROM.
Make sure your CSC is compatible with the 'model' ROM you have on the phone, and not necessarily the stock hardware 'model' of the phone.
Click to expand...
Click to collapse
Thank you. Do you remember if XAA is giving you VoLTE and/or WiFi Calling? Independently from the features of the ROM you mentioned.
Sorry posting didn't work earlier.
Sorry posting didn't work earlier.
TGSKK said:
Thank you. Do you remember if XAA is giving you VoLTE and/or WiFi Calling? Independently from the features of the ROM you mentioned.
Click to expand...
Click to collapse
VoLTE and Wifi calling show up as Blue (available-enabled), though I have never tried to use either. I live in an area where internet service is about 4-5 mbs, and cell service just gets to a few, 3G bars. In town the data is 4G and great, though I always just call directly.
---------- Post added at 01:44 AM ---------- Previous post was at 01:40 AM ----------
TGSKK said:
Which CVC version from which country would you recommend to use on the S8+ G955F international version for use with the US carriers?
If possible enabling VoLTE and WiFi Calling.
Using Odin only, NO root, to not trigger Knox.
Click to expand...
Click to collapse
On an international phone I think you can flash CSC without triggering Knox . . . ?
I found XAA/XAA works great. I have tried out the XAA/AT&T, T-Mobile, Verizon and Sprint CSC's, within the main XAA, but AT&T, et al comes with bloatware the respective boot logos. I have a Note 8 custom ROM, so I have to use a CSC for a Note 8 phone.
Using the XAA/XAA unbranded carrier, no bloatware, and all GSM phones, 7's and 8's, have worked just fine.
---------- Post added at 01:45 AM ---------- Previous post was at 01:44 AM ----------
I don't know whats going on with posting this weekend... very slow for the replies to post 'up'
---------- Post added at 01:49 AM ---------- Previous post was at 01:45 AM ----------
TGSKK said:
Thank you. Do you remember if XAA is giving you VoLTE and/or WiFi Calling? Independently from the features of the ROM you mentioned.
Click to expand...
Click to collapse
I don't know if it is 'independent' from the ROM I'm using, I just know they show up blue/enabled. Never tried them.
The ROM is a ported Note 8 'F' ROM.
Thank All to b here for helping
First of all i have an s8+ g955w with csc g955woya5bsa1 but i just found throgh imei info and samsung phone info app that my s8+ is g955U so its clear that my phone is converted bcuz samsung phone info says my prodyxt code is g955uzsaxac. Now plz help me regarding going back to g955 u conpletely without any mess like network lock or any other glitch bcuz if i got my g955u as my stock rom and stock csc etc then i ill get android pie officially so plz help my
Sorry for any noob question
Adnan65 said:
Thank All to b here for helping
First of all i have an s8+ g955w with csc g955woya5bsa1 but i just found throgh imei info and samsung phone info app that my s8+ is g955U so its clear that my phone is converted bcuz samsung phone info says my prodyxt code is g955uzsaxac. Now plz help me regarding going back to g955 u conpletely without any mess like network lock or any other glitch bcuz if i got my g955u as my stock rom and stock csc etc then i ill get android pie officially so plz help my
Sorry for any noob question
Click to expand...
Click to collapse
See that 5. Thats your revison bootloader. You need to flash the same revision 5 combimation rom. Then the U revision 5 of your choice...
If the device is sim unlocked you will face no issues. If it is still locked it will only work on whatever carrier and it's under companies. Say like att also has cricket straight talk tracfone and net10 that all run on att just flashing firmware won't relock it
---------- Post added at 02:15 PM ---------- Previous post was at 02:12 PM ----------
As a further note all w models are Actually U models just flashed for Canada
TheMadScientist said:
See that 5. Thats your revison bootloader. You need to flash the same revision 5 combimation rom. Then the U revision 5 of your choice...
If the device is sim unlocked you will face no issues. If it is still locked it will only work on whatever carrier and it's under companies. Say like att also has cricket straight talk tracfone and net10 that all run on att just flashing firmware won't relock it
---------- Post added at 02:15 PM ---------- Previous post was at 02:12 PM ----------
As a further note all w models are Actually U models just flashed for Canada
Click to expand...
Click to collapse
Ohh thanks sir for be here i m in pakistan and all sims are working fine here so plz refer me or plz tell me about g955u flash without any brick tension or root or any other mess plz Thank U again
Adnan65 said:
Ohh thanks sir for be here i m in pakistan and all sims are working fine here so plz refer me or plz tell me about g955u flash without any brick tension or root or any other mess plz Thank U again
Click to expand...
Click to collapse
I would leave it be then. Just in the off chance. Why fix what isn't broken
I'm not sure if this is supported, I can't seem to get much help from AT&T, but I purchased an unlocked Note 10+ from Samsung. I do not have WiFi Calling which is a crucial feature since my office has terrible reception and I use the phone for work.
Is this something I should be able to get working with help from my carrier or is this ROM/build specific? Any help would be appreciated, thanks!
rysal said:
I'm not sure if this is supported, I can't seem to get much help from AT&T, but I purchased an unlocked Note 10+ from Samsung. I do not have WiFi Calling which is a crucial feature since my office has terrible reception and I use the phone for work.
Is this something I should be able to get working with help from my carrier or is this ROM/build specific? Any help would be appreciated, thanks!
Click to expand...
Click to collapse
Along with one or two pros, I found this to be one of the cons in using an unlocked phone with Verizon a couple of years ago, along with no notifications. I spent countless hours over several days on the phone with Samsung and Verizon before finding out this was a known (by Samsung) issue. I returned mine and got the Verizon branded one. Things may have changed since then, but it cured me of the unlocked version, especially since contracts have fallen by the wayside. If they can't resolve the WiFi calling, Samsung should allow you to return it. I hope someone else has a solution for you.
Install the ATT rom using Odin
foeshigity said:
Install the ATT rom using Odin
Click to expand...
Click to collapse
Glad I read first, I'm going through the same thing right now. Just downloaded the firmware from Sammobile about to try and see.
rysal said:
I'm not sure if this is supported, I can't seem to get much help from AT&T, but I purchased an unlocked Note 10+ from Samsung. I do not have WiFi Calling which is a crucial feature since my office has terrible reception and I use the phone for work.
Is this something I should be able to get working with help from my carrier or is this ROM/build specific? Any help would be appreciated, thanks!
Click to expand...
Click to collapse
I Tried flashing the AT&T firmware N975U1UEU1ASH4 from Sammobile and sill no wifi calling.
I am in the same boat. Just out of curiosity what does the service provider SW ver. look like? Mine shows ATT/ATT/XAA
Still no wifi calling or carrier specific options...it's kind of strange that these phones provision the features when you put a sim card in.
I called both At&t and Samsung who were equally less than helpful.
I am looking back to some of the S8+ forums about CSC swapping because I feel like that might be a starting place...
TechGoon954 said:
I Tried flashing the AT&T firmware N975U1UEU1ASH4 from Sammobile and sill no wifi calling.
Click to expand...
Click to collapse
You downloaded N975U1 unlocked rom, it was still rom for unlocked note 10 not AT&T or variant note 10. If you want full AT&T features like wifi calling, video calling..you should download and odin this firmware N975USQU1ASH4 which is AT&T Variant N975U. I am still on unlocked Galaxy note 9 N960U1 and I odin Verizon note 9 SM-N960U on my unlocked Galaxy note 9. The ROM works with every carrier anyway.
rysal said:
I'm not sure if this is supported, I can't seem to get much help from AT&T, but I purchased an unlocked Note 10+ from Samsung. I do not have WiFi Calling which is a crucial feature since my office has terrible reception and I use the phone for work.
Is this something I should be able to get working with help from my carrier or is this ROM/build specific? Any help would be appreciated, thanks!
Click to expand...
Click to collapse
luckyfate said:
You downloaded N975U1 unlocked rom, it was still rom for unlocked note 10 not AT&T or variant note 10. If you want full AT&T features like wifi calling, video calling..you should download and odin this firmware N975USQU1ASH4 which is AT&T Variant N975U. I am still on unlocked Galaxy note 9 N960U1 and I odin Verizon note 9 SM-N960U on my unlocked Galaxy note 9. The ROM works with every carrier anyway.
Click to expand...
Click to collapse
Okay , I got my WIFI calling . This is the correct one to download and flash......... DO NOT Download the one that says AT&T it's going to just flash the same N975U1. Good luck:good:
I'm thinking about doing this. Will flashing the at&t firmware wipe the phone? Articles I've read says it doesn't. Is that correct?
---------- Post added at 10:04 PM ---------- Previous post was at 09:56 PM ----------
Also can someone confirm the correct at&t firmware for the Note 10? Also use the USA(USC) version?
TechGoon954 said:
Okay , I got my WIFI calling . This is the correct one to download and flash......... DO NOT Download the one that says AT&T it's going to just flash the same N975U1. Good luck:good:
Click to expand...
Click to collapse
Thank you! I was able to successfully flash with this ROM and now have the AT&T features I was missing!
What about for the regular Note 10? Is it N970USQU1ASH4 for the unlocked AT&T version?
I just flashed the regular Note 10. Still no wifi calling. In the Service Provider SW ver, it says ATT/ATT/XAA so I believe I've flashed the ATT firmware?
Baseband version
N970UIUEUIASH4
Service provider SW ver.
SAOMC SM-N970UI_OYM_ATT_PP_0030
R58M81758ZM
ATT/ATT/XAA
I just flashed to N970USQU1ASH4, and got the AT&T bloat and wifi calling, but theres no cellular service anymore. I tried flashing back, but now am getting a model mismatch error. I dont know what to do anymore.
Did you download from the sammobile site? Did you use the att or usc firmware?
rmrl2008 said:
Did you download from the sammobile site? Did you use the att or usc firmware?
Click to expand...
Click to collapse
I flashed N970USQU1ASH4_N970UOYN1ASH4_USC from sammobile.com
Hmm I did the same thing. I flashed both the att and usc firmwares. Odin said pass but I didn't see any difference. I used the home_csc file though. I didn't want to wipe my phone before knowing whether I used the right firmware.
I have an N970u1 but flashed it to the u version. Is that what you did?
Well my model number still says U1. So does that mean that me flashing both the USC and ATT firmwares did nothing?
---------- Post added at 08:15 PM ---------- Previous post was at 07:56 PM ----------
I understand what you're asking me now. No I used the u1 firmwares.
---------- Post added at 08:27 PM ---------- Previous post was at 08:15 PM ----------
Did you get your phone working? I'm hesitant to give the U firmware a try now.
---------- Post added at 08:48 PM ---------- Previous post was at 08:27 PM ----------
Reading another thread, did you first boot up with an att sim card before flashing? I believe you have to do that first.
Ota updates
Will the OTA updates work after flashing the att stuff? I know theres a new firmware but the phone is saying it's up to date.
I'm having a problem with this too. I flashed the USC version and got the ATT Bloat, but when I try to enable wifi calling I get "Oops! Wi-Fi Calling can't be turned on right now. Please call 611 or 800-901-9878 for assistance. (APP0008) Can anyone help?
Is it possible they are locking Wifi calling based on IEMI?