Hi,
As I purchase and AU KDDI SCV35 model, is there any difference between firmwares? Can I use USA unlocked firmware on AU model? My phone is running SC03J firmware (to unlock SIM) and it's working fine.
silveraero said:
Hi,
As I purchase and AU KDDI SCV35 model, is there any difference between firmwares? Can I use USA unlocked firmware on AU model? My phone is running SC03J firmware (to unlock SIM) and it's working fine.
Click to expand...
Click to collapse
No, you can't flash the US firmware.
murtaza02 said:
No, you can't flash the US firmware.
Click to expand...
Click to collapse
What if I only use the AP image without the others. Why SC03J firmware can be flashed on SCV35 but US unlocked U firmware can't?
silveraero said:
What if I only use the AP image without the others. Why SC03J firmware can be flashed on SCV35 but US unlocked U firmware can't?
Click to expand...
Click to collapse
Different partition sizes, and the Japanese variant has some minor hardware differences like the NFC chip I believe, and some LTE bands.
The 3 Japanese variants themselves are identical, and I'm sure their firmwares can be flashed on each one, just like you can do with the U/U1 variants, but you can't flash a firmware for one variant on an entirely different one.
You can TRY using the AP image only, but it'll most likely result in a soft-brick, possibly a hard brick, or the phone and/or Odin rejecting the image due to model number mismatch.
so whats the similar firmware for SCV35 sassing S8 + then?
murtaza02 said:
You can TRY using the AP image only, but it'll most likely result in a soft-brick, possibly a hard brick, or the phone and/or Odin rejecting the image due to model number mismatch.
Click to expand...
Click to collapse
Did anyone try this out? I have a SCV35 and I want to Americanize it.
Chipsnsit said:
Did anyone try this out? I have a SCV35 and I want to Americanize it.
Click to expand...
Click to collapse
Didn't work. Probably won't.
Too many differences between the variants.
Sent from my SM-G965F
Hi. I have same problem. Any solution to flash SCV35 with other firmware like g955f g955fd ?
Related
I find that VZ USA have Android 5.1.1 for P905v
Can i install it over P905 ?
thank you
there's another firmware Android 5.1.1 , T905XXUBOI1
anyone can advise if we can safely install one of these firmware on P905
gee22 said:
there's another firmware Android 5.1.1 , T905XXUBOI1
anyone can advise if we can safely install one of these firmware on P905
Click to expand...
Click to collapse
Although all the SM-P905 have the same hardware, they're customized for specific cellular provider and bootloader is locked.
You can try to flash with Odin but I believe you will have a fail as it detects wrong firmware, like P905V is for Verizon, P905A for AT&T.
they're not interchangeable although mainboard is exactly the same.
No. USA firmware is not compatible with international devices.
P905V is not the same device as P905. The P905V is a locked device, with branded firmware locked to Verizon devices. T905 is the T-Mobile USA variant of the exact same locked firmware problem.
You need to use international firmware for the international P905.
Confirmed, I have tried T905XXUBOI1 , but failed during flashing unfortunately
hopefully someone can solve it one day , it shouldnt be difficult
gee22 said:
Confirmed, I have tried T905XXUBOI1 , but failed during flashing unfortunately
hopefully someone can solve it one day , it shouldnt be difficult
Click to expand...
Click to collapse
I own and have opened different LTE tablets, I can tell they are the same tablet, only Samsung has this ability to
unlock the bootloader and load the desired firmware. I can swap mainboard of SM-P905V to a SM-P907A tablet or vice versa without
any problem which indicates they are identical tablets except firmware and bootloader.
Any way, Lollipop 5.02 and 5.1.1 have no differences as it depends on the model.
Like Tab Pro SM-T900 is 5.1.1 but Note Pro SM-P900 is 5.0.2, don't bother to load different firmware from another model.
I have an American model S7 Edge, but would like to install the firmware of my region so that I can get access to our 4g network. The bands are capable, so this phone is for sure able to access this, it's just my model is region locked, and to one specific carrier.
I was told there is a chance that this will result in altering the IMEI, which is not what I want at all, I just want to alter the firmware.
Is this at all possible? I tried before, but it only resulted in errors on Odin.
If you unlock it, does it access full network?
Sent from my SM-G930W8 using Tapatalk
ere1nion said:
If you unlock it, does it access full network?
Sent from my SM-G930W8 using Tapatalk
Click to expand...
Click to collapse
Yes. Before my phone crashed it was using the firmware of another country's model.
What if you try flashing the G930U firmware? It's the US's International version and I know it's able to be flashed onto the G930/5V (Verizon variants) with no problems at all. Maybe give that a try and see where you're at.
Outbreak444 said:
What if you try flashing the G930U firmware? It's the US's International version and I know it's able to be flashed onto the G930/5V (Verizon variants) with no problems at all. Maybe give that a try and see where you're at.
Click to expand...
Click to collapse
Thank you, I shall try that version next!
Hello
I bought an s8+ from HK which is the dual SIM Snapdragon version (G9550). Using it here in Australia, everything works as expected as it supports all of our bands, however VoLTE does not work. I've read this is because the CSC does not match a local CSC.
Unfortunately there are no Snapdragon versions sold here, hence no firmware with the Aus CSC (XSA) that will support VoLTE (as I read you can't flash the Exynos ROM onto the Snapdragon).
Is there any way I can enable VoLTE? Can I somehow change the CSC without an official ROM? Like go into the G9550 ROM and replace the CSC with the Aus CSC?
The only other region with the Snapdragon is the US from what I can tell, which probably wouldn't enable VoLTE either.
Any advice is appreciated
Thanks.
ult_nrg said:
Hello
I bought an s8+ from HK which is the dual SIM Snapdragon version (G9550). Using it here in Australia
Is there any way I can enable VoLTE? Can I somehow change the CSC without an official ROM? Like go into the G9550 ROM and replace the CSC with the Aus CSC?
The only other region with the Snapdragon is the US from what I can tell, which probably wouldn't enable VoLTE either.
Any advice is appreciated
Thanks.
Click to expand...
Click to collapse
You may root and then flash your csc zip (or simply replace the CSC files in the custom rom with your CSC files). You should get VoLTE. Download Multi CSC file from here and extract your csc.
I do the same but with India CSC on USA snapdragon models.
nimms said:
You may root and then flash your csc zip (or simply replace the CSC files in the custom rom with your CSC files). You should get VoLTE. Download Multi CSC file from here and extract your csc.
I do the same but with India CSC on USA snapdragon models.
Click to expand...
Click to collapse
Thanks nimms. This is pretty much exactly what I was after, except I cannot root the phone (work required Knox so I can't trip it ). I was hoping I could do somthing like the above, only via Odin, but it sounds like you can't change the CSC without rooting the phone due to making system changes.
Try this code in dialer *#272*imei# and change your csc from there
thatsupnow said:
Try this code in dialer *#272*imei# and change your csc from there
Click to expand...
Click to collapse
Thanks for the reply!
I've tried that but unfortunately get a dialog saying "UNKNOWN APPLICATION".
ult_nrg said:
Hello
I bought an s8+ from HK which is the dual SIM Snapdragon version (G9550). Using it here in Australia, everything works as expected as it supports all of our bands, however VoLTE does not work. I've read this is because the CSC does not match a local CSC.
Unfortunately there are no Snapdragon versions sold here, hence no firmware with the Aus CSC (XSA) that will support VoLTE (as I read you can't flash the Exynos ROM onto the Snapdragon).
Is there any way I can enable VoLTE? Can I somehow change the CSC without an official ROM? Like go into the G9550 ROM and replace the CSC with the Aus CSC?
The only other region with the Snapdragon is the US from what I can tell, which probably wouldn't enable VoLTE either.
Any advice is appreciated
Thanks.
Click to expand...
Click to collapse
Hi
As far as I'm concerned, this is not possible without tripping the Knox counter. And if you try flashing the XSA CSC (via Odin), you will definitely soft brick your phone
ims setting. maybe can fix your issue ,just download a hidden app display. then you can open ins setting
t-shock said:
Hi
As far as I'm concerned, this is not possible without tripping the Knox counter. And if you try flashing the XSA CSC (via Odin), you will definitely soft brick your phone
Click to expand...
Click to collapse
Odin won't even flash it, It's pretty hard to soft brick this phone with official tools and firmware.
Interceptor777 said:
Odin won't even flash it, It's pretty hard to soft brick this phone with official tools and firmware.
Click to expand...
Click to collapse
Yes
Odin won't flash it but if you try to flash it and after that you reboot, you will stuck at download mode. Only by flashing the correct files, will make it boot
t-shock said:
Yes
Odin won't flash it but if you try to flash it and after that you reboot, you will stuck at download mode. Only by flashing the correct files, will make it boot
Click to expand...
Click to collapse
Interesting.
Another question...the only difference I've noticed between the 9550 (HK) and 955U (US) is that the US version does not have Band 28 but the HK version does, which we do use here in Aus.
If I flashed a US firmware (which has the same S835 SoC), would I lose Band28, or would the modem still be able to use it?
EDIT: what if I only flashed the CP file (modem), is this interchangeable between the different SoCs? Could I flash the XSA CP (modem) onto another ROM, or will this soft-brick?
wangksn said:
ims setting. maybe can fix your issue ,just download a hidden app display. then you can open ins setting
Click to expand...
Click to collapse
My IMS is saying "Not registered" in the about phone. I can't seem to do anything about it, and the hidden menu doesn't give me the option to change it.
IMS setting is located explicitly on "Settings -> Mobile Networks -> Access Point Names"
The best bet you may try is to find a Samsung phone thats currently in VoLTE then copy IMS apn settings onto you phone (you manually input the settings).
ult_nrg said:
Interesting.
Another question...the only difference I've noticed between the 9550 (HK) and 955U (US) is that the US version does not have Band 28 but the HK version does, which we do use here in Aus.
If I flashed a US firmware (which has the same S835 SoC), would I lose Band28, or would the modem still be able to use it?
EDIT: what if I only flashed the CP file (modem), is this interchangeable between the different SoCs? Could I flash the XSA CP (modem) onto another ROM, or will this soft-brick?
My IMS is saying "Not registered" in the about phone. I can't seem to do anything about it, and the hidden menu doesn't give me the option to change it.
Click to expand...
Click to collapse
it is can change if you know the parameter. I see have a lots of valume, I don't know why I can't upload the snapshot to hare
Hey , its too easy to get CSC to another Provider. Just ADB Sideload it. I can give you the mod for Germany VD2 or Verizon USA. No Tripping and knox 0x0
012345678 said:
Hey , its too easy to get CSC to another Provider. Just ADB Sideload it. I can give you the mod for Germany VD2 or Verizon USA. No Tripping and knox 0x0
Click to expand...
Click to collapse
Please, write detailed instructions for G9550 and example .zip
012345678 said:
Hey , its too easy to get CSC to another Provider. Just ADB Sideload it. I can give you the mod for Germany VD2 or Verizon USA. No Tripping and knox 0x0
Click to expand...
Click to collapse
+1
Dr. said:
[No_WaY;76004070]+1
Click to expand...
Click to collapse
I need the mod please for changing csc
012345678 said:
Hey , its too easy to get CSC to another Provider. Just ADB Sideload it. I can give you the mod for Germany VD2 or Verizon USA. No Tripping and knox 0x0
Click to expand...
Click to collapse
Do not enter people astray, ADB Sideload It's not working - error "signature verification failed"
need ROOT
VD2-CSC-S8S8p
MY Galaxy S8+ SM-G9550, SW - G9550ZHU2AQL2
Just download an official ROM (A variant from a country that supports VoLTE) for ur model from sammobile or u might even find it on the xda forum and flash it via odin with Home CSC.
It works well... No need to root n KNOX counter wont be tripped...
PS: Backup data.. They will be lost in the process.
Now we're talking about ADB, not ODIN or TWRP.
Flash via ADB Sideload - not possible. You understand me. Smartphones snapdragon not flash Exynos SW. You can only edit an existing profile CSC or add new CSC.
Example:
my smartphone TGY (snapdragon model SW)
but I live in the region of SER (EXYNOS MODEL SW)
GRIBL said:
Now we're talking about ADB, not ODIN or TWRP.
Flash via ADB Sideload - not possible. You understand me. Smartphones snapdragon not flash Exynos SW. You can only edit an existing profile CSC or add new CSC.
Example:
my smartphone TGY (snapdragon model SW)
but I live in the region of SER (EXYNOS MODEL SW)
Click to expand...
Click to collapse
Right, My bad... I missed the international part itself...
But as far as i know, Exynos CSCs also dont go with the Snapdragon CSCs... I could be wrong.
I was wondering if it's possible to enable VoLTE on an SM-G930F running BTU firmware on an AT&T carrier. Is there any way to get things like WiFi Calling and VoLTE on it, or am I just screwed since I'm using the international variant of the phone?
When I first got it brand new from Wal-Mart, it was running TTT firmware (from Trinidad and Tobago for some reason) and showed normal 3G, 4G, and LTE symbols on my status bar. Since I wanted to get the Nougat update early, I flashed BTU which switched the symbols to H, H+, and 4G. Does that have anything to do with it?
Thanks.
You're certain it's a G930F? And from Walmart of all places? Exynos isn't meant to be sold in the US.
If it's a G930F and you have TWRP you can flash the CSC tool in the development section which has the US carriers, and CSC is what enables VoLTE.
If it's a US snapdragon model you could flash the AT&T CSC via Odin without needing TWRP.
Beanvee7 said:
You're certain it's a G930F? And from Walmart of all places? Exynos isn't meant to be sold in the US.
If it's a G930F and you have TWRP you can flash the CSC tool in the development section which has the US carriers, and CSC is what enables VoLTE.
If it's a US snapdragon model you could flash the AT&T CSC via Odin without needing TWRP.
Click to expand...
Click to collapse
If OP successfully flashed BTU then it has to be a Exynos G930F, but I agree, most phones sold in the US claiming to be the G930F are modded Snapdragons faked to look like it, but they obviously won't allow a Exynos ROM to be flashed to them, so in this case OP has got a real Exynos
Could be the modem (CP) part of the firmware controlling which carrier services you can receive in your region, not sure I'd recommend flashing a US modem to a UK firmware though, unsure what would happen, although the G930F is pretty straight forward to unbrick as long as you can get back into download mode
Beanvee7 said:
If it's a G930F and you have TWRP you can flash the CSC tool in the development section which has the US carriers, and CSC is what enables VoLTE.
Click to expand...
Click to collapse
Where is this CSC tool? I'm not sure what you mean by "development section". I have an Oreo G930F and I'm trying to get VoLTE to work with AT&T.
Feenix0 said:
Where is this CSC tool? I'm not sure what you mean by "development section". I have an Oreo G930F and I'm trying to get VoLTE to work with AT&T.
Click to expand...
Click to collapse
It hasn't been updated with the newer versions of Android so it's not really a thing anymore.
Next best thing is to download the entire firmware package for your carrier from somewhere like updato then flash only the home_CSC file. Although iirc this might now work if mixing and matching models, which is why the CSC flash tool was a thing.
Beanvee7 said:
It hasn't been updated with the newer versions of Android so it's not really a thing anymore.
Next best thing is to download the entire firmware package for your carrier from somewhere like updato then flash only the home_CSC file. Although iirc this might now work if mixing and matching models, which is why the CSC flash tool was a thing.
Click to expand...
Click to collapse
The trouble is that the G930F was never officially released on US markets, so I can't find a US firmware. I'd gladly use another market's firmware if I knew it would support AT&T VoLTE and "LTE only" mode, but I have no idea how to figure that out!
So it turns out that I have the Canadian SM-G930W8 (as shown on the download mode screen), not the G930F (as shown everywhere else). Identical hardware, but I can only flash Canadian firmware.
I don't find note 20 ultra Dual sim firmware. Does the N986b/ds use same firmware as the N986b without loosing dual sim function? Reason I'm thinking on flashing is cause I have a xfa version and network reception is really bad and thinking on flashing btu. Do u guys think that a new firmware might help? (all other devices I get 3 bar at home and with note 20 ultra sometimes I have no network)
Check here for your required FW.
N986B is the Global Exynos model (it is Dual-SIM = DS); in case if any regions are single-SIM for this particular model (I'm not aware as such), the N986B FW will still be the same as for DS.
elmor0 said:
Check here for your required FW.
N986B is the Global Exynos model (it is Dual-SIM = DS); in case if any regions are single-SIM for this particular model (I'm not aware as such), the N986B FW will still be the same as for DS.
Click to expand...
Click to collapse
Thank you. Do u think if I flash a different country firmware, might help with poor signal?
specia1one said:
Thank you. Do u think if I flash a different country firmware, might help with poor signal?
Click to expand...
Click to collapse
It's possible I think.
But..... only try other Exynos region FW (cannot flash FW for SnapDragon variants on N986B without running into problems).
Check on Note 20 threads regarding properly changing CSC.
Also, there are some .xml modification solutions that enable you to activate extra 4g/5g bands - worth a search & try.
(Sorry I don't have the links to hand, but recall seeing these discussions before on N20 XDA forums).
I'm with Three UK does this help
Cheers eddie
If I download BTU firmware and just flash it with Odin won't it just install firmware and radio software? Sorry I been away from Samsung for some years now. In past was just easy to flash a d all would work.
specia1one said:
If I download BTU firmware and just flash it with Odin won't it just install firmware and radio software? Sorry I been away from Samsung for some years now. In past was just easy to flash a d all would work.
Click to expand...
Click to collapse
When you un-compress the firmware download you will get five files. Each go into a specific part of ODIN - can't mistake it - but if you want to keep data intact you will need to flash Home_CSC. This will NOT change your regional CSC however.
You also need the "hacked" version of ODIN found on this forum easily.
ultramag69 said:
When you un-compress the firmware download you will get five files. Each go into a specific part of ODIN - can't mistake it - but if you want to keep data intact you will need to flash Home_CSC. This will NOT change your regional CSC however.
You also need the "hacked" version of ODIN found on this forum easily.
Click to expand...
Click to collapse
If I flash that 5 files will I still be able to get Ota?
When I flash should I use CSC or HOME CSC. So that I keep getting updates? I think that if I flash UK international firmware, will sort alot of my issues. It feels in my country software is never very stable.
Flashing CSC will delete your Data but flashing HOME_CSC will not delete your Data.
elmor0 said:
Flashing CSC will delete your Data but flashing HOME_CSC will not delete your Data.
Click to expand...
Click to collapse
Will both ways I still get Ota even if I install btu firmware? (is there any benefit on me flashing the csc and not Home_CSC?)
Once bootloader unlocked I don't think you can get OTA - You'll need to flash FW updates manually.
Flash CSC for clean install.
Flash HOME_CSC if just updating FW & need to preserve user data.
elmor0 said:
Once bootloader unlocked I don't think you can get OTA - You'll need to flash FW updates manually.
Flash CSC for clean install.
Flash HOME_CSC if just updating FW & need to preserve user data.
Click to expand...
Click to collapse
So if I flash a different rom I won't be able to do Ota anymore?
No
specia1one said:
So if I flash a different rom I won't be able to do Ota anymore?
Click to expand...
Click to collapse
Not unless you re-lock BL.
Hopefully they'll come with a solution. I would like to flash a different rom (different country) and still get Ota updates as normal. I don't wanna be flashing every month
These are stock roms, why do you need to unlock your bootloader?
ultramag69 said:
These are stock roms, why do you need to unlock your bootloader?
Click to expand...
Click to collapse
I only want to flash a btu firmware. I don't need custom roms. Just want an advise and guidance. Cause I don't know now how it works. I was told here that I won't get otas if I flash a btu rom on my note 20 ultra that currently has xfa
specia1one said:
I only want to flash a btu firmware. I don't need custom roms. Just want an advise and guidance. Cause I don't know now how it works. I was told here that I won't get otas if I flash a btu rom on my note 20 ultra that currently has xfa
Click to expand...
Click to collapse
Yes I understand but why is someone talking about unlocking your bootloader?
You just want to change your CSC...
ultramag69 said:
Yes I understand but why is someone talking about unlocking your bootloader?
You just want to change your CSC...
Click to expand...
Click to collapse
I end up selling my note 20 ultra. Signal was bad. I'm using my p30 pro for now until I get something else. But I doubt will be a Samsung.
Thanks for help guys