Related
I have made a custom ROM, with additional API's and patches using stock ICS source - Downloaded from source.android.com.
After modifying, patching etc, I built the ROM using 'make' on my Ubuntu machine.
I followed the steps here to build the ROM: http://source.android.com/source/building.html
The output of this procedure is attached as a screenshot
(I copied the folder to windows hence the screenshot shows a windows OS)
Now I have a ROM I am asked to flash it using'fastboot flashall' per the instruction here:
http://source.android.com/source/building-devices.html
My device doesn't seem to support a Fastboot mode.
The output folder of the ROM is attached as a screenshot.
A> When I try to use CWM, it fails to flash - MD5 Mismatch:
Also I am unsure how CWM flashes and which of the folders are to be included. A CWM recovery generates:
1. boot.img
2. recovery.img
3. system.ext4.tar
4. data.ext4.tar
5. cache.ext4.tar
6. nandroid.md5
Clearly my output folder is not aligned to this format. So I'm a bit lost here.
B> Odin takes on tar file. I am not sure if simply making the folder a tar will work.
C> Heimdall doesnt support this tab I guess...
Any ideas on a solution would be appreciated.
Thanks & Regards
Indrajit
Downloaded & Installed a custom ROM zip, it worked. How can I make mine into a zip?
Most of the custom ROMs have a boot.img, system folder, data folder and meta-inf.
What is Meta-Inf?
Also If I zip my ROM (created as mentioned above) and try installing it doesnt since I dont have a Meta-Inf & I cant use the other meta-inf.
This is the ROM I installed: Worked fine except USB-PC connection didnt:
http://forum.xda-developers.com/showthread.php?t=1643736
Any ideas / suggestions would be highly useful & appreciated.
Thanks in advance.
PIMP MY ROM V2.0 FOR O3D:fingers-crossed:
Hey guys I have just tried the ROM customizer PIMP MY ROM by Androguide.fr for all android devices,and I found that V2.0 of this CWM flashable Aroma Installer works fine on O3D.However extra apps like sony ericsson walkman suite and and DSP manager from this installer doesn't install,except this everything works cool.
First download V2.0 HDPI version for O3D then do as follows:
Open the zip of the rom you are running with winrar or 7zip or whatever (the .zip file that you flash in recovery)
Inside this zip, navigate to : META-INF/com/google/android
Extract the file called "update-binary" and rename it to "update-binary-installer" then close your rom's zip
Open Pimp my Rom's zip (i.e : PIMP_MY_ROM-v1.5.3-by-Androguide.fr.zip)
Do not unzip it, inside this zip, navigate to : META-INF/com/google/android and delete "updater-binary-installer"
Now copy the "update-binary-installer" file you extracted & renamed from your rom to Pimp My Rom's zip (still in META-INF/com/google/android). Simply drag and drop it into PmR's zip to add it.
Close the zip and flash it
How to Flash PMR installer:
You can flash this on top of any custom rom with init.d support(like DNA_GB3.33)
- Download the version of Pimp My Rom that corresponds to your device's screen resolution (Not sure what res your device is ? Here "http://blog.blundell-apps.com/list-of-android-devices-with-pixel-density-buckets/" is a well-furnished list of android devices with their screen-res)O3D'S SCREEN RESOLUTION IS HDPI.
- Make sure you are running a custom recovery (CWM or TWRP)
- Make a nandroid backup of your current ROM, just in case
- Wipe cache and dalvik cache in recovery
- Flash PmR in recovery
- A wonderful touchscreen interface will pop-up
(devices need different touchscreen calibration, if the touchscreen doesn't work, use the menu button of your device, select "Calibration Tools" and follow the instructions)
- Follow the on-screen instructions, make your choices between all the different features to Pimp your Rom
- Select "Reboot my device" on last screen (or reboot from recovery) and enjoy.
HDPI version for O3D;
http://tinyw.in/Hv72
md5 : md5 : 6d409bd4121c9055648a6c358311f2ae
Size : 32.41 mb
original thread:http://forum.xda-developers.com/showthread.php?t=1908269
IF THIS HELPED HIT THANKS!!!!
Works great on MaxLine ICS v3 with NoIdea kernel & Supercharger V6. No lags, faster and 100% stable.
in the list :
optimus 3D:
LG Optimus 3D | 2.3 | hdpi
Edit your post .... because it has mistakes.
1.
- Download the version of Pimp My Rom that corresponds to your device's screen resolution (Not sure what res your device is ? Here is a well-furnished list of android devices with their screen-res)
- Make sure you are running a custom recovery (CWM or TWRP)
- Make sure you have busybox installed, if you don't or if you're not sure, download Busybox Installer from the Play Store (free)
- Make a nandroid backup of your current ROM, just in case
- Wipe cache and dalvik cache in recovery
- Flash PmR in recovery
- A wonderful touchscreen interface will pop-up
(devices need different touchscreen calibration, if the touchscreen doesn't work, use the menu button of your device, select "Calibration Tools" and follow the instructions)
- Follow the on-screen instructions, make your choices between all the different features to Pimp your Rom
- Select "Reboot my device" on last screen (or reboot from recovery) and enjoy
Encountering installation issues ?
Do the following to fix most errors you might get on some devices :
Open the zip of the rom you are running with winrar or 7zip or whatever (the .zip file that you flash in recovery)
Inside this zip, navigate to : META-INF/com/google/android
Extract the file called "update-binary" and rename it to "update-binary-installer" then close your rom's zip
Open Pimp my Rom's zip (i.e : PIMP_MY_ROM-v1.5.3-by-Androguide.fr.zip)
Do not unzip it, inside this zip, navigate to : META-INF/com/google/android and delete "updater-binary-installer"
Now copy the "update-binary-installer" file you extracted & renamed from your rom to Pimp My Rom's zip (still in META-INF/com/google/android). Simply drag and drop it into PmR's zip to add it.
Close the zip and flash it
2
LG Optimus 3D | 2,3 | hdpi
whats diffrences with other?
wichniar said:
Edit your post .... because it has mistakes.
1.
- Download the version of Pimp My Rom that corresponds to your device's screen resolution (Not sure what res your device is ? Here is a well-furnished list of android devices with their screen-res)
- Make sure you are running a custom recovery (CWM or TWRP)
- Make sure you have busybox installed, if you don't or if you're not sure, download Busybox Installer from the Play Store (free)
- Make a nandroid backup of your current ROM, just in case
- Wipe cache and dalvik cache in recovery
- Flash PmR in recovery
- A wonderful touchscreen interface will pop-up
(devices need different touchscreen calibration, if the touchscreen doesn't work, use the menu button of your device, select "Calibration Tools" and follow the instructions)
- Follow the on-screen instructions, make your choices between all the different features to Pimp your Rom
- Select "Reboot my device" on last screen (or reboot from recovery) and enjoy
Encountering installation issues ?
Do the following to fix most errors you might get on some devices :
Open the zip of the rom you are running with winrar or 7zip or whatever (the .zip file that you flash in recovery)
Inside this zip, navigate to : META-INF/com/google/android
Extract the file called "update-binary" and rename it to "update-binary-installer" then close your rom's zip
Open Pimp my Rom's zip (i.e : PIMP_MY_ROM-v1.5.3-by-Androguide.fr.zip)
Do not unzip it, inside this zip, navigate to : META-INF/com/google/android and delete "updater-binary-installer"
Now copy the "update-binary-installer" file you extracted & renamed from your rom to Pimp My Rom's zip (still in META-INF/com/google/android). Simply drag and drop it into PmR's zip to add it.
Close the zip and flash it
2
LG Optimus 3D | 2,3 | hdpi
Click to expand...
Click to collapse
yah man ,at the time I used this flasher LG optimus 3D wasn't on the list and I used mdpi version and it worked fine.Now I see that the list of DPI is updated with LG optimus 3D as HDPI.:fingers-crossed:
Is it working on the ICS port?
should work not sure ,please try it.This is reported to run perfectly on other android devices with ICS and JB.Please try and report.
eternal.sumit said:
should work not sure ,please try it.This is reported to run perfectly on other android devices with ICS and JB.Please try and report.
Click to expand...
Click to collapse
Yes works: D
Installed but now?!
How do I do to reverse the pimping? I'm sure that, because of it, my phone got bugged: became slower, less responsive, often it freezes on simple tasks like activating WiFi. So how do I uninstall it?
BigBadSheep said:
How do I do to reverse the pimping? I'm sure that, because of it, my phone got bugged: became slower, less responsive, often it freezes on simple tasks like activating WiFi. So how do I uninstall it?
Click to expand...
Click to collapse
Just restore a previous backup from before the pimping or if you don't have a backup refresh your Rom but try the zip again first most of the options you can reverse
Sent from my LG-P920 using xda app-developers app
First time I used it, I got stuck when it changed the dns & ppp0 settings.
Took the battery out, did everything again and unselected the dns & ppp0 thing and it worked.
Everything is way more smooth and it's faster.
This keeps breaking video recording.
Anybody tried this on our new ics?
Could somebody post what are they tweaking to make our device work better?
I tried it on sanmo prometheus and kernel, sadly it just make things worse. It lagged and sometimes its freeze and bootloop.
I wanted to try it again with the new ics from xbsall. I will report how my device runs after the tweak.
Thanks
Sent from my GT-P7500 using xda app-developers app
Yes it works on ics
Sent from my LG-P925 using xda premium
Code:
[CENTER][COLOR="Red"]Your warranty is now void.[/COLOR]
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research before asking help and reporting bugs and please read the entire OP.
YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
A lot.[/CENTER]
All suggestions and helps are welcome here so please help me in improving this thread by suggesting your ideas.
This guide will work for any SPRD phone (any SPRD chip) from Old versions of android to latest Oreo but recoveries that I provided in this thread will work for devices from KitKat to Marshmallow no guarantees for older or newer versions.
Buckup! Backup! Backup!
Before modifying system it's highly recommended to have full dump of your device. So don't forget to take backup.
It's simple to get custom recovery for rooted users as they can directly backup, modify and flash recovery or boot images on the go with the help of root. But non-rooted users need to do some extra which will be explained later. Follow the below steps:
=>Download and setup AIK (Android Image Kitchen)
=>Grab your stock_recovery.img
For rooted usersInstall Flashify, Rashr, Partitions Backup or like apps (available on play store for free) and backup the stock recovery. If you are using Flashify to backup you have to rename the backed up image with .img extention
For non-rooted usersDownload your stock firmware which will be in .pac extension extract it using this guide and copy the recovery.img
=>Now download custom recovery (for downloads see 2nd post)
=>Port recovery
For PC version of AIK
• Extract the AIK on desktop in a folder (extracting inside other folder(s) is not recommended)
• Place stock_recovery.img (use the name recovery.img only I added stock to refer the image) in earlier extracted folder
• Now double click on 'unpacking.bat'
• Now you'll see two folders 'ramdisk (mostly executables)' and 'split-img (kernel to boot recovery) rename those folders like this 'ramdisk.s' and 'split_img.s' (renaming is used to avoid copying/moving needed files)
• Now delete the earlier pasted stock_recovery.img and paste custom_recovery.img (rename it to recovery.img)
• Unpack it just like stock_recovery
• Delete the split-img and rename the 'split_img.s' to split_img
• Open recovery.fstab from /ramdisk.s/etc (stock recovery's fstab) and /ramdisk/etc (custom recovery's fstab) using Notepad++ or with your favorite note editor. In case of TWRP recovery this file will be named as twrp.fstab if there is recovery. fstab you can ignore it.
• Edit the partition names and mount points in custom recovery with your stock recovery's fstab. But in most cases the mount points will be shown like this 'mmclbk0p17 for system partition' in that case you need to change custom recovery.fstab with the mount points of your device, to find out mount points of partitions install Diskinfo from play store and enable all options in it which will show complete information regarding each and every partition on your device
• At last double click on 'repackimg.bat' now you'll see 'image-new.img' which is ported custom_recovery.img for your device
• The final step is flashing the recovery. It's easy for rooted users simply use Flashify app to flash. For non-Root users you need to flash it over fastboot mode for this look at this thread.
For mobile version of AIK
You can also port the recovery on-the-go using AIK-Mobile unfortunately to use this needs your device must be rooted with BusyBox (Stephen (stericson) is recommended) installed.
It's a flashable zip but you can extract the zip and place the files manually. Follow below steps for setup:
• Extract the AIK-Mobile.zip
• Paste the AIK-Mobile folder under data/local of extracted zip to /data/local
• Paste files under /bin of extracted zip to /data/local/AIK-Mobile/bin
• Make sure all files including folders are having these permissions "-rwrx-xr-x-".
For placing files, changing permissions and executing scripts 'Explorer' by speed software is recommended.
For porting follow above steps (steps in PC version of AIK) the only difference here is .bat files of PC version will be as .sh in mobile version which are to be executed as root for unpacking and repackaging images.
Note:Follow the instructions properly, don't quote entire OP while asking for help. Due to some touch related drivers missing in kernel of recovery in some devices touch recovery won't work in that case please use Non-Touch recovery. In lollipop or later versions don't flash <3.x.x versions which may result in SD card mounting issues and even flashing errors. First test the recovery that you ported by flash a simple mode (I prefer AIK-Mobile since it doesn't modify the system partition hence there is not chance of bootloop. Also see whether wipe options works properly or not in some devices wiping (even cache) takes ~10m in that case goto settings check the option "use rm -rf instead of formatting".
Hit thanks button instead of posting thanks it'll boost me to create more threads like this.
Credits:
Advan S4P [Official] (fb group), SuDroid Tech (fb group), @@ki , @Jitheshwar (it's me), and some aliens from other universe.
Created: 27-09-2017
Last Updated: 27-09-2017
Custom recovery downloads
1) TWRP recovery images
2.7.0-0
2.8.5-0
2.8.5-0
3.0.0-0
3.0.2-0
3.0.2-0
3.0.2-0
3.1.1-0
2)Cyanogen recovery (for lollipop)
3)Cyanogen recovery (for kikat)
4)MIUI recovery
5)Ultra CWM
6)Temporary CWM (only for KitKat and older
7)Temporary Philz (only for KitKat and older)
Temporary recoveries provided here are not for porting. You can flash those zips directly from you stock recovery these recoveries will have basic functions like flashing ROMs, Wiping (in some devices it'll take too long to wipe so just use factory reset option of stock recovery and then flash this recovery finally the ROM. Back up option of recovery might not be fully functional. Scrolling is glitchy but it'll work when you press button. These are more for users who are unable get working recovery
Reserved for FAQ.
Do you know how to port boot to help twrp recovery mode boot up ? Please guide me.
Boot Secure & twrp
Jitheshwar said:
Click to expand...
Click to collapse
I have fpt x50 , vn phone , which runs android 7.0 with sc7731c
Will this guide work ??
Jitheshwar said:
..
Click to expand...
Click to collapse
Sir...
you wrote that delete only split_img.s.....
but not ramdisk.s.......
Is there any problem will arise when repacking with ramdisk.s with ramdisk and split_img of custom recovery?
HemanthJabalpuri said:
Sir...
you wrote that delete only split_img.s.....
but not ramdisk.s.......
Is there any problem will arise when repacking with ramdisk.s with ramdisk and split_img of custom recovery?
Click to expand...
Click to collapse
Read again carefully you have to pack custom recoveries ramdisk with stock split_img and reversing the process will mess up the recovery and then you have to flash the stock recovery. So read the guide carefully step-by-step and follow the process exactly unless you know different working method.
unknown said:
I have fpt x50 , vn phone , which runs android 7.0 with sc7731c
Will this guide work ??
Click to expand...
Click to collapse
Give it a try it may work. But none of the recoveries that are provided here will work for your device, you need to find Android 7.0 and later recoveries which will be compatible with your chipset model.
kaew158 said:
Do you know how to port boot to help twrp recovery mode boot up ? Please guide me.
Boot Secure & twrp
Click to expand...
Click to collapse
TWRP has nothing to do with boot.img. If you are not able to boot to recovery try different key combination. Is you messed up recovery too then flash it via fastboot and then flash the stock Rom.
Jitheshwar said:
Click to expand...
Click to collapse
Sir finally the process is to pack
⇛split_img of stock recovery ......
⇛ramdisk of custom recovery you listed by replacing recovery.fstab file
Some doubt are ... from where the recoveries are taken sir?
another one is can i port a custom recovery made for similar device to my device by using these steps?
Thanks for supporting spreadtrum devices....
HemanthJabalpuri said:
Sir finally the process is to pack
⇛ramdisk of recovery you listed by replacing recovery.fstab file
⇛spit_img of stock recovery right......
Some doubt are ... from where the recoveries are taken sir?
another one is can i port a custom recovery made for similar device to my device by using these steps?
Thanks for supporting spreadtrum devices....
Click to expand...
Click to collapse
Kindly go through the entire post carefully, I believe I provided sufficient info that even a newbie can port.
Jitheshwar said:
Kindly go through the entire post carefully, I believe I provided sufficient info that even a newbie can port.
Click to expand...
Click to collapse
Sir I read entire post...
But there is no line that states to delete ramdisk of stock recovery....
Check and add that line sir....
Also process of installing AIK for Mobile changed...
We directly install and use the AIK as all other apps on playstore
HemanthJabalpuri said:
Sir I read entire post...
But there is no line that states to delete ramdisk of stock recovery....
Check and add that line sir....
Also process of installing AIK for Mobile changed...
We directly install and use the AIK as all other apps on playstore
Click to expand...
Click to collapse
I clearly stated all the steps in an easy and simple way. My kind request to you to read the post again. And one more thing if you want to use apk version use it I don't have any issues but don't ask me if anything goes wrong.
i ported twrp 3.2.1 to sc8830 sucessfully but touch is not working , can you help?
where can i find non-touch recovery
I'm using android 5.1
What is specification kernel architecture in this tutorial?. I have HH Advan S50 same with the name of chipset version.I still doubt fo following your tutorial.
denmasgie said:
What is specification kernel architecture in this tutorial?. I have HH Advan S50 same with the name of chipset version.I still doubt fo following your tutorial.
Click to expand...
Click to collapse
This is just some copy&paste guide thath will not work on most bootloader locked spreadtrum OEM phones
Please fix the twrp links!!!
@Vortex said:
This is just some copy&paste guide thath will not work on most bootloader locked spreadtrum OEM phones
Click to expand...
Click to collapse
No custom recovery will work on bootloader locked devices...
denmasgie said:
What is specification kernel architecture in this tutorial?. I have HH Advan S50 same with the name of chipset version.I still doubt fo following your tutorial.
Click to expand...
Click to collapse
Kernel architecture is ARM.
Thread will be best viewed in website
Code:
[CENTER][COLOR="red"]Your warranty is now void.[/COLOR]
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research before asking help and reporting bugs.
Please read the entire OP instructions and FAQ,if any.
You are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
A lot.[/CENTER]
This thread is for spreadtrum Marshmallow, lollipop and KitKat phones. I made this guide for porting especially CM/CM based ROMs. This thread is in under progress, I'll be keep adding and changing things. These lines will be removed when I think I'm done.
Requirements
A PC /Laptop /Even your android phone is enough for porting, since your not building ROM, provided that you know how to get things done
Android Image Kitchen
A ZIP archiver(winzip,7z,etc)
Notepad++/your favorite one
HEX Editor (for Android available on play store)
A working brain with basic understanding skills properly installed
An Android device with the chipset as per the title (of cource this will work on iPhone and Windows phones but sadly my kitten eaten flashing instructions , so blame my kitty:silly
A working custom recovery (if you don't have one, this thread might help you)
Aroma File Manager (this is used to skip the process of extracting system files from system.ext.win and system.new.dat and compressing it back)
Stock ROM (extracted to easily accessable folder, since we are going to port the ROM not using normal File Manager but a recovery based file manager
Custom ROM(S) (download links are in the 2nd post)
I'll suggest you to concentrate on booting the ROM rather fixing bugs at first shot, because if we are sure that the ROM boots we can go further, otherwise it's waste of time.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Marshmallow ROM porting guide
=> Download and Extract the ROM. Since ROM(S) is zipped out of custom recovery backup you'll see system.ext4.win (which is a compressed system folder) boot.emmc.win (boot.img) and some, maybe, compressed using system.new.dat.
Porting boot.img
=> Copy stock boot.img to working directory of AIK
=> Unpack boot.img and rename ramdisk to ramdisk.s and split_img to spli_img.s
=> Copy boot.emmc.win to working directory of AIK and rename it to boot.img
=> Unpack boot.img
=> Replace the following
/ramdisk/lib/modules with /ramdisk.s/lib/modules
/ramdisk/lib/modules/mali.ko with /system/lib/modules/mali.ko from stockrom
=> delete split_img and rename split_img.s to split_img
repack it and rename image-new.img to boot.emmc.win and replace Custom ROM boot.emmc.win with ported boot.emmc.win.
Porting System
=> Boot to recovery and wipe system, data, cache and dalvik-cache and flash the CM13/Marshmallow ROM
=> Go back to tab menu of TWRP tap on 'Mount tab' Mount system and go back to flash tab and flash aroma file manager zip
=> Now you are on Aroma FM. Copy and replace the following files with stock ROM files:
/system/lib/hw/<all files> except files audio.primary.sc8830.so & bluetooth.default.so
/system/etc/ all audio related files except audio_effect.conf
/system/etc/codec_pga.xml
/system/etc/ media related files
/system/etc/tiny_hw.xml
/system/lib/egl/libGLES_mali.so
/system/lib/libEGL.so
/system/lib/libGLES_trace.so
/system/lib/libGLESv1_CM.so
/system/lib/libGLESv2.so
/system/lib/libMali.ko,if any
=> After replacing files exit Aroma FM and reboot the system. Booting will take a while (~10m) so please be patient.
Bug Fixing Guide
Camera Fix
Open lib files one by one on stock rom lollipop & search for "_ZN7android5Fence4waitEj"(without quotes) with notepad++ (mainly look into the files related to camera.sc8830.so, to know open it with HeX editor and see what are the necessary lib***.so files)
In my case "_ZN7android5Fence4waitEj" are available on stock libui.so where that file needed by camera.sc8830.so
SO open camera.sc8830.so with HexEditor and search for libui.so
Then rename libui.so of stock rom file to libcm.so and save it
Copy and paste modified file to the exact directory and wipe data, cache, dalvik-cache (data is nedded because if the camera HAL fails to load at first time CM ROMs won't show camera app in that case it is must to wipe data)
Then reboot & make sure camera.sc8830.so loaded correctly with logcat
Fix for possible bootloops when porting Marshmallow ROM using lollipop kernel
Soon.....
Note:-I'm sure the marshmallow ROM(s) will boot on lollipop device also (because I personally tested with my phone but I need confirmation that this works on marshmallow devices also.
Lollipop ROM porting guide
Porting boot.img
=> Copy stock boot.img to working directory of AIK
=> Unpack boot.img and rename ramdisk to ramdisk.s and split_img to spli_img.s
=> Copy custom ROM boot.img to working directory of AIK
=> Unpack boot.img
=> Replace the following:
/ramdisk/lib/modules with /ramdisk.s/lib/modules
/ramdisk/lib/modules/mali.ko with /system/lib/modules/mali.ko from stockrom
delete split_img and rename split_img.s to split_img
repack it and rename image-new.img to boot.img and replace Custom ROM boot.img with ported boot.img.
Porting system
=> Boot to recovery and wipe system, data, cache and dalvik-cache and flash the CM12/lollipop ROM
=> Go back to tab menu of TWRP tap on 'Mount tab' Mount system and go back to flash tab and flash aroma file manager zip
=> Now you are on AromaFM. Copy and replace the following files with stock ROM files:
/system/lib/egl/libGLES_mali.so
/system/lib/hw/<all files> except files audio.primary.sc8830.so & bluetooth.default.so
/system/lib/modules<all files>
/system/vendor/lib/libbt-vendor.so with stockrom /system/lib/libbt-vendor.so.
=> After replacing files exit Aroma FM and reboot the system. Booting will take a while (~10m) so please be patient.
Typing Bug Fixing Guide
KitKat ROM porting guide
Porting boot.img
=> Copy stock boot.img to working directory of AIK
=> Unpack boot.img and rename ramdisk to ramdisk.s and split_img to spli_img.s
=> Copy custom ROM boot.img to working directory of AIK
=> Unpack boot.img
=> Replace the following
/ramdisk/sbin files with /ramdisk.s/sbin files
/ramdisk/init.sc8830.usb.rc with /ramdisk.s/init.sc8830.usb.rc
/ramdisk/init.usb.rc with /ramdisk.s/init.usb.rc
=> Delete split_img and rename split_img.s to split_img
repack it and rename image-new.img to boot.img and replace Custom ROM boot.img with ported boot.img.
Porting system
=>Replace the following:
/system/lib/egl/<all files>
/system/lib/hw (following files) :
camera.sc8830.so
camera2.sc8830.so
gralloc.default.so
gralloc.sc8830.so
hwcomposer.sc8830.so
keystore.default.so
lights.sc8830.so
local_time.default.so
power.default.so
sensors.sc8830.so
sprd_gsp.sc8830.so
/system/lib/modules<all files>
/system/vendor/lib/libbt-vendor.so with stock ROM /system/lib/libbt-vendor.so
Booting will take a while (~10m) so please be patient)
NOTE: If you stuck at Splash Logo (Manufacturer's logo) then delete CM11/system/lib/egl/libGLES_mali.so from recovery and then wipe data, cache, dalvik-cache and reboot.
Bug Fixing Guide
Camera Fix
Copy files camera.sc8830.so, camera2.sc8830.so & libandroidfw.so from stock ROM
Rename libandroidfw.so to libandroidcm.so
=> Download and install Hex Editor (Users who are using Android for porting can use Hex editor from playstore)
Open camera.sc8830.so with Hex Editor and search for libandroidfw.so & rename it to libandroidcm.so
Save camera.sc8830.so file, copy and paste it to CM/CM based ROM
Do the same for camera2.sc8830.so
This will fix the error "Cannot load Camera HAL" which is caused by camera.sc8830.so mising start_SprdPrefTracking & stop_SprdPrefTracking argument which is available only on original libandroidfw.so on your stockrom.
Reboot your device
If you haven't seen camera app then you may need to wipe the data and dalvik-cache but there is an alternative for this. The alternative is using third party camera app from play store if the camera works then you are good to go
but to have CM stock camera you must need to wipe data
WiFi/Hotspot fix
Part - I
Make sure your stock ROM WiFi (WLAN) driver name is sprdwl.ko on /system/lib/modules
Copy the following folder(s) from stok rom & paste to cm-11.0 rom
--/system/etc/wifi/<all files>
/system/etc/dhcpcd/<all files>
--/system/etc/connectivity_calibration.ini (related to WiFi connectivity)
--/system/etc/connectivity_configure.ini (related to Bluetooth connectivity)
I suggest you to replace files from Aroma FM (since we don't need to set permissions, etc which will automatically done by Aroma FM)
If you are replacing files from root explorer you need to properly set the permissions and Ownership/Group of particular for otherwise there will be no point in replacing the files and this will result in either unfixed bug or bootloop for this properly note down the permissions and Ownership/Group of individual files
for ex: /system/etc/dhcpcd/dhcpcd-run-hooks has permissions "-r-xr-x--- or 0550" and Owner is "dhcp" and Group is "shell"
Part - II
Unpack cm-11.0/based ported boot.img and replace "init.wifi.rc" file with this init.wifi.rc
Flash the modified boot.img using Flashify/ from recovery using flash image option (recommended)
To test whether the WiFi driver properly loaded or not
use terminal emulator type
Code:
su
<enter>
cat /proc/modules
<enter>
see whether the sprdwl.ko present on loaded modules list.
Try to use WiFi and immediately see the logs (use logcat Extreme app from play store) set if there are any errors
Do the same with Hotspot
as a result you may need to replace some files under --/system/bin/
ex:
--/system/bin/dhcpcd
--/system/bin/hostopad
--/system/bin/wcnd
--/system/bin/wpa_cli
--/system/bin/wpa_supplicant
etc
To root flash Magisk (systemless-root only for lollipop and above) or SuperSU
Credits: Hadi Khoirudin, Advan S4p [Official] fb group, @@ki,
@Jitheshwar (it's me :silly: )
Created 2/10/2017
Last Updated 3/10/2017
Downloads:-
Marshmallow
CyanogenMd 13.1
Bug fix Update (extract zip and replace files and port boot.img and then zip it, boot to recovery wipe cache and dalvik-cache flash the zip and reboot)
=====================
Resurrection Remix 5.7.4
Offline Charging fix
PAC-MAN ROM
Lollipop ROMs
CyanogenMod 12.1
=====================
Resurrection Remix
WiFi-Hotspot-fix-for-CM/based-lollipop-ROMs
KitKat ROMs
PAC-MAN ROM
=====================
MIUI7-7.4.26
Video codec fix
WiFi-Hotspot-fix-for-CM/based-KitKat-ROMs
More links have been adding
Reserved
You could have given me the credits.......well nice thread.....just a updated version of my thread
@ki said:
You could have given me the credits.......well nice thread.....just a updated version of my thread
Click to expand...
Click to collapse
But I took nothing from your work. I made this thread keeping CM ROMs in mind. But I have given credits to you in recovery porting thread since I used some of your work. Anyway you have given me Idea. PM me with more suggestions.
Edit: credits updated.
Jitheshwar said:
But I took nothing from your work. I made this thread keeping CM ROMs in mind. But I have given credits to you in recovery porting thread since I used some of your work. Anyway you have given me Idea. PM me with more suggestions.
Edit: credits updated.
Click to expand...
Click to collapse
Sorry for being so rude.......well i will try to suggest if anything good comes to my mind
Will the camera fix work with evercrossmod rom
[email protected] said:
Will the camera fix work with evercrossmod rom
Click to expand...
Click to collapse
No. That fix is for CM/CM based roms only. For stock based ROMs you just need replace camera libs.
Jitheshwar said:
No. That fix is for CM/CM based roms only. For stock based ROMs you just need replace camera libs.
Click to expand...
Click to collapse
This did not worked...the camera icon is showing but it says app not installed.I replaced the previous hw files (camera.sc8830.so and the camera2.sc8830.so). Now the app is opening but can't connect to camera.
[email protected] said:
This did not worked...the camera icon is showing but it says app not installed.I replaced the previous hw files (camera.sc8830.so and the camera2.sc8830.so). Now the app is opening but can't connect to camera.
Click to expand...
Click to collapse
You have to replace files having name "libcamera****.so" too.
How to unpack and repack system.ext4.win ?
[email protected] said:
How to unpack and repack system.ext4.win ?
Click to expand...
Click to collapse
just rename the file to system.ext4.win.tar.gz
and open it like a norma zip file
[email protected] said:
How to unpack and repack system.ext4.win ?
Click to expand...
Click to collapse
rename extension with .tar and extract it as usual but while repacking make sure you're using .tar compression type only. But I recommend using Aroma FM since extracting and compressing system.ext4.win may result in incorrect file permissions, as it is compressed by recovery.
@ki said:
just rename the file to system.ext4.win.tar.gz
and open it like a norma zip file
Click to expand...
Click to collapse
no need of .tar.gz, .tar is sufficient. As it is backuped in recovery by disabling "Enable Compression option" means we'll see the system files after extracting the system.ext4.win and not the system.ext4.win (compressed system image).
Jitheshwar said:
no need of .tar.gz, .tar is sufficient. As it is backuped in recovery by disabling "Enable Compression option" means we'll see the system files after extracting the system.ext4.win and not the system.ext4.win (compressed system image).
Click to expand...
Click to collapse
Now which software extracts .tar file. Plz tell me a software for windows
Jitheshwar said:
no need of .tar.gz, .tar is sufficient. As it is backuped in recovery by disabling "Enable Compression option" means we'll see the system files after extracting the system.ext4.win and not the system.ext4.win (compressed system image).
Click to expand...
Click to collapse
Yup....i forgot to mention that......just thought why anyone wants to backup without compression......
[email protected] said:
Now which software extracts .tar file. Plz tell me a software for windows
Click to expand...
Click to collapse
A zip archiver like 7zip, Winzip, etc. Mist if these software will be available for free. If you are using mobile to port I recommend ZArchiver.
After i'm port cm12 rom to sc7731 my device, is say Android is starting.... After that is restart and do that again, what i'm do wrong?
RustyDiamond said:
After i'm port cm12 rom to sc7731 my device, is say Android is starting.... After that is restart and do that again, what i'm do wrong?
Click to expand...
Click to collapse
your kernel....
RustyDiamond said:
After i'm port cm12 rom to sc7731 my device, is say Android is starting.... After that is restart and do that again, what i'm do wrong?
Click to expand...
Click to collapse
You may not replaced necessary lib(s).
Wipe everything before flashing the ROM (it is suggested to wipe internal storage also).
Don't replace everything (like camera libs) because they might give issues that you are facing, first key the device boot then fix bugs. If possible take logs using adb.
bugs
wifi
4g (it shouldn't be a bug just i didn't test, am a wifi user)
may be proximity sensor (will pass the fix )
I'm not using the rom, not getting time to look in to bugs actually
working stuff
pretty much everything other than stuff mentioned above, report if you find any bug here and there
credits
@moluntic (permissions)
@deepanshu @yash @rana (for teaching me porting)
installation method
download file from the link I'm providing below
extract it using 7zip or any 7z extractor (z-archiever apk)
pick up the boot img according to your device
make a zip of meta-inf , system with boot img (of your device)
flash the zip via twrp
pull the sim cards off, use them after boot up
downlaod link
h ttps://drive.google.com/open?id=1kBdBXtP8W9wLmZ08vaU_HeSa_L38PZnn (remove space after h)