UNOFFICIAL LineageOS fork with built-in microG gapps implementation.LineageOS is a free, community built, aftermarket firmware distribution of Android 8.1 (Oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
While the core operating system is still released as part of the Android Open Source Project, the majority of core apps are not. It gets worse: More and more libraries and APIs are only available on phones that run various Google apps pre-installed, effectively locking third-party apps to the Google ecosystem. Several popular open-source applications already require some of Google’s proprietary libraries to be installed. Increasing demand in the free software community in addition to severe problems in Google’s proprietary software discovered by the Android modding community, have led to the development of a free software clone of Google’s proprietary core libraries and applications - the microG Project was born.
This image uses the restricted microG patch meaning only system packages embedded in the build can use FAKE_SIGNATURE permission.
I have also replaced the default chromium system webview with the bromite system webview (20190519 build) which includes extra ad-blocking and privacy patches on top of chromium.
Code:
DISCLAIMER: THERE IS NO WARRANTY OF ANY KIND APPLICABLE TO THE CONTENT BELOW
What's working:
Boots
Wifi
NFC
Bluetooth
Camera
Video Playback
Audio
Sensors
GPS
SafetyNet Check passes both Basic Integrity and CTS profile match!
Known Bugs:
Phone is not detected by adb while booted in recovery mode (TWRP). I don't know if that's a bug in TWRP or on my laptop's USB drivers. If the phone has an OS installed (checked on various ROM's) (ie booted in system mode) it is detected, but not when in it is booted in recovery mode and running the latest TWRP. Place the image in an sdcard, put it in the phone and install it from there as a workaround. (Adb sideload can also work.)
Battery consumption appears to have improved on later builds, probably because of this change.
Instructions:
Download and install the latest twrp - dl-link (Steps on how to do it not covered here.)
Reboot to recovery
Wipe Data+Cache+Dalvik+System
Install ZIP file.
Reboot
Downloads:
Latest Build: lineage-15.1-20190519-CUSTOM_LINEAGE_MICROG-s5neolte.zip - lineage-15.1-20190519-CUSTOM_LINEAGE_MICROG-s5neolte.zip.md5sum
20190319 Build: lineage-15.1-20190319-CUSTOM_LINEAGE_MICROG-s5neoltexx.zip - lineage-15.1-20190319-CUSTOM_LINEAGE_MICROG-s5neoltexx.zip.md5sum
Reporting Bugs:
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Notes:
Many thanks to Stricted for pointing me out to the patch needed to fix a phone reboot whenever the phone connected to Wi-Fi
This is an amateur hobby project. I recommend against using this image as a daily driver, and I am quite likely to be unable to help you with any problems you experience (because I don't know enough about building a ROM).
Source Code:
Complete instructions on how to build this image on your own here !
Team Exynos7580 sources
LineageOS4microG CI/CD docker image code
FAQ:
Q: What is microG?
A: The projects webpage will do a better job than me.
TLDR version: A free software implementation of some proprietary Google Play services API's.
XDA:DevDB Information
LineageOS4microG, ROM for the Samsung Galaxy S5 Neo
Contributors
Iolaum, Stricted
Source Code: https://github.com/Iolaum/s5neoltexx-lineageos-microg
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP
Based On: LineageOS
Version Information
Status: Testing
Created 2018-11-18
Last Updated 2018-11-19
It seems interesting the ROM who has installed the details please as it runs the ROM
Rovar22 said:
It seems interesting the ROM who has installed the details please as it runs the ROM
Click to expand...
Click to collapse
Hello, I am not sure what you ask. Can you please elaborate?
Iolaum said:
Hello, I am not sure what you ask. Can you please elaborate?
Click to expand...
Click to collapse
Hey there, I'm guessing that he wants a log of someone who has already installed the system, to find out whether he wants to install it or not.
I'm going to flash it today and maybe post a log from a clean install, if it is helpful to anyone.
Btw thank you lolalum for the build and the instructions!
It's awesome that there's still someone left, who's trying to save us from google
Thank you for your answers, the installation is very good, what I need is the installation of "play store". Thanks for the Rom.
Sure, no problem.
Ok, now I understand: I guess you didn't know that you can't install the Playstore with microG.
The reason is, that it has been replaced by the "Fakestore" (you can find it in Settings>Apps*show system processes) It is just a fake or a placeholder to make apps "think" there is an official Playstore, when there really isn't one. So even if you tried to install it, (through Xda Labs for example) it would only be seen as an update of the Fakestore, and wouldn't work.
You can still get every app in the Playstore though, with "Aurora Store" or "Yalp Store". They both allow you to log in to your Google account and to buy apps and items. If that isn't needed "apkmirror.com" works as well.
Thank you
Rovar22 said:
Thank you
Click to expand...
Click to collapse
Glad I could help, but there is a "thank you button" for this
I've been using this rom for the past 2 days, and it worked ok, but I had issues with some calls with root and vibration settings and pretty much every time I tried to reboot to recovery the phone didn't respond at all until I removed the battery. (going to switch over to AospExtended rom now, because it supports microg as well.)
New build
New Build:
lineage-15.1-20190204-CUSTOM_LINEAGE_MICROG-s5neoltexx.zip - lineage-15.1-20190204-CUSTOM_LINEAGE_MICROG-s5neoltexx.zip.md5sum
Changelog:
Added custom microG apks built with PRs that allow to pass SafetyNet check.
Added Gsam Battery monitor and Matlog libre as system apps. They require permissions that need to be given by adb or root, it's easier to use their functionality if they are built in.
New Build:
lineage-15.1-20190214-CUSTOM_LINEAGE_MICROG-s5neoltexx.zip - lineage-15.1-20190214-CUSTOM_LINEAGE_MICROG-s5neoltexx.zip.md5sum
Changelog:
Updated microg apk from Nanodroid. (If Nandodroid releases newer versions before I release a new image you can download them from his repository and install them since I am using the pre-built apks signed by him instead of building them from source.)
Rebuilt so soon to include the lastest 5 Feb 2019 security update that patches a critical security vulnerability in Framework that could allow a remote attacker using a specially crafted PNG file to execute arbitrary code within the context of a privileged process.
New build
New Build:
lineage-15.1-20190319-CUSTOM_LINEAGE_MICROG-s5neoltexx.zip - lineage-15.1-20190319-CUSTOM_LINEAGE_MICROG-s5neoltexx.zip.md5sum
Changelog:
Updated microg gmscore apk from Nanodroid. (If Nanodroid releases newer versions before I release a new image you can download them from his repository and install them since I am using the pre-built apks signed by him instead of building them from source.)
Rebuild includes android security patch level march 2019. (Vendor security patch level is still March 2017 as in all earlier builds.
I installed this ROM on top of the previous one with no problems. Process is:
Reboot into recovery
Wipe Cache, Dalvik/ART Cache and System
Install new system image (zip file) and reboot.
New build features
New Build
lineage-15.1-20190519-CUSTOM_LINEAGE_MICROG-s5neolte.zip - lineage-15.1-20190519-CUSTOM_LINEAGE_MICROG-s5neolte.zip.md5sum
Changelog:
Moved to new Team Exynos7580 sources.
Updated microg gmscore apk from Nanodroid. (If Nanodroid releases newer versions before I release a new image you can download them from his repository and install them since I am using the pre-built apks signed by him instead of building them from source.)
Rebuild includes android security patch level May 2019. (Vendor security patch level is still March 2017 as in all earlier builds.
Replaced android's chromium system webview with the bromite system webview. Bromite is Chromium plus ad blocking and privacy enhancements.
Installation Instructions:
Because this build is built from a slightly different source than the previous ones and the default system webview was changed, I suggest a clean install wiping data, cache, dalvik and system.
Known Issues
- Nanolx and Bromite repositories are not added in Fdroid repositories by default as intended. They need to be added manually after installation. After you do so, ignoring updates for the Play store package is recommended if you don't plan to use it. The fakestore package included by default is only intended to be there for apps that want it to be there in order to function. Nanolx's playstore app allows in-app purchaces and other functionality which may or may not work properly - I 've never tested it not intend to do so.
Source code if you want to build it yourselves.
GZOSP
is GZ-AOSP (Fancy name of AOSP-CAF?) based with a Dark Wolfie theme with full OMS support and has a lot of features.
is GZ-AOSP based with full OMS support and has handpicked useful features.
is based on Slim with full OMS support.
G+ Community
https://plus.google.com/u/0/communit...59573276360638
Substratum G+ Community
https://plus.google.com/u/0/communit...17366580091389
Theme Ready and TBO apps
http://.xda-developers.com/showthread.php?t=3113192
http://.xda-developers.com/showthread.php?t=2283828
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Fingerprint reader
Lights
Sound / vibration
Facelock
Known issues
Nothing
Installation Instructions
ALWAYS MAKE A NANDROID BACKUP FIRST!
Coming from another rom/clean install:
Reboot to recovery.
Wipe cache, dalvik/art cache, data
Flash rom zip and gapps
Reboot
Updating from a previous build/dirty flash:
Wipe cache, dalvik/art cache in recovery
Flash rom zip, and any other zips you may use
Reboot
Magisk is included as default Root providing application. However if you prefer any other root providing solution, please flash magisk uninstaller (search in xda) before you proceed.
As an alternate root solution, SuperSU can be flashed, v2.78 works for me. After flashing, your device may boot twice before boot animation, don't worry it'll be fine after that.
Some users reported 2.52 Beta worked for them.
You can use phhSuperuser as well for root access, get the it from here and you need to install the play store app also.
Substratum support is there as long as you have root and latest Substratum app. Some may have a little catching up to do, have fun testing them!
If you have any issues, grab a log after a clean flash, upload and link here please. Add steps to reproduce the issue in your post.
Do not report issues dirty flashing this over some unofficial build or with some kernel flashed.
Logcat Extreme app is great as you can choose to start recording a log just before reproducing an error and stop recording just after so you log just the part you need.
Xposed is not supported here, if you want to run it and have issues, try an Xposed thread for support and bug reports here only welcome with a clean install with no Xposed present.
Make sure to state which rom you are running when asking for support
Dynamic Gapps
http://.xda-developers.com/showthread.php?t=3487192
Open Gapps
OpenGapps
Downloads:-
GZOSP BUILD
XDA:DevDB Information
GZOSP, ROM for the Xiaomi Redmi Note 7 Pro
Contributors
sriram prakhya
Source Code: https://github.com/GZOSP
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Current Stable Version: 2.1
Stable Release Date: 2019-08-29
Created 2019-08-29
Last Updated 2019-08-29
Screenshots please.
The file does not flash, writes error 6!
QS tiles styles? Wrappedkey?
Thanks for Rom Brother
GZOSP
is GZ-AOSP (Fancy name of AOSP-CAF?) based with a Dark Wolfie theme with full OMS support and has a lot of features.
is GZ-AOSP based with full OMS support and has handpicked useful features.
is based on Slim with full OMS support.
G+ Community
https://plus.google.com/u/0/communit...59573276360638
Substratum G+ Community
https://plus.google.com/u/0/communit...17366580091389
Theme Ready and TBO apps
http://.xda-developers.com/showthread.php?t=3113192
http://.xda-developers.com/showthread.php?t=2283828
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Fingerprint reader
Lights
Sound / vibration
Facelock
Known issues
Nothing
Installation Instructions
ALWAYS MAKE A NANDROID BACKUP FIRST!
Coming from another rom/clean install:
Reboot to recovery.
Wipe cache, dalvik/art cache, data
Flash rom zip and gapps
Reboot
Updating from a previous build/dirty flash:
Wipe cache, dalvik/art cache in recovery
Flash rom zip, and any other zips you may use
Reboot
Magisk is included as default Root providing application. However if you prefer any other root providing solution, please flash magisk uninstaller (search in xda) before you proceed.
As an alternate root solution, SuperSU can be flashed, v2.78 works for me. After flashing, your device may boot twice before boot animation, don't worry it'll be fine after that.
Some users reported 2.52 Beta worked for them.
You can use phhSuperuser as well for root access, get the it from here and you need to install the play store app also.
Substratum support is there as long as you have root and latest Substratum app. Some may have a little catching up to do, have fun testing them!
If you have any issues, grab a log after a clean flash, upload and link here please. Add steps to reproduce the issue in your post.
Do not report issues dirty flashing this over some unofficial build or with some kernel flashed.
Logcat Extreme app is great as you can choose to start recording a log just before reproducing an error and stop recording just after so you log just the part you need.
Xposed is not supported here, if you want to run it and have issues, try an Xposed thread for support and bug reports here only welcome with a clean install with no Xposed present.
Make sure to state which rom you are running when asking for support
Dynamic Gapps
http://.xda-developers.com/showthread.php?t=3487192
Open Gapps
OpenGapps
Downloads:-
GZOSP BUILD
Tips
XDA:DevDB Information
GZOSP, ROM for the Xiaomi Redmi Note 7 Pro
Contributors
sriram prakhya
Source Code: https://github.com/GZOSP
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Current Stable Version: 2.1
Stable Release Date: 2019-08-29
Created 2019-08-29
Last Updated 2019-08-29
Screenshots plz
This thread is a duplicate of https://forum.xda-developers.com/redmi-note-7-pro/development/rom-gzosp-t3962851
Closed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and we was based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
For Android 10 we are now full AOSP-based.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@Maxwen and the rest of the OmniRom team
DU team
SlimRoms team
Resurrection Remix team
Community
...
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build nightlies/weeklies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Download-Links:
ROM: https://dwnld.aicp-rom.com/
TWRP: https://github.com/CaptainThrowback/android_device_htc_hima/releases
GAPPS: https://opengapps.org/?arch=arm64&api=10.0
Please note that official builds will be deleted from our servers every month due to maintenance services.
We advise everyone to keep at least the latest or best working build on their device as a backup.
Maybe copy it to a cloud service or USB too.
What's working
-wifi
-mobile data
-camera
-bluetooth
-NFC
-audio
-DT2W
-DT2S
-AICP Themes
-GPS
-Encryption
-FlipFlap
-mobile data signal strength
What's not working
You tell us!
FAQ:
Before using the ROM:
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Xposed is not yet released for Pie, however you can try to use edxposed .
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid backup first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Pie. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work).
6. Reboot and set up your device, enable developer settings and in them OEM unlock/Advanced reboot/USB tethering.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
Currently supported Root Solution:
Magisk canary
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest TWRP recovery, keep in mind that this could also be an unofficial version!
On encrypted devices you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/AICP/kernel_htc_msm8994
Device tree source:
https://github.com/AICP/device_htc_hima
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds[/B]
Contributors:
@Claymore1297
@k4y0z
@eyosen
The following information is ONLY needed if you are not opening up a devdb thread on XDA!
ROM OS Version: 10.0 Android 10
Kernel: Linux 3.10.108
Requirements
HTC Firmware: 4.x
TWRP: 3.3.1
Version Information:
Status: BETA
Release Date: 14-09-2019
You want to see a "normal" night at the "DEV office", click here!!
XDA:DevDB Information
AICP 15.0, ROM for the HTC One (M9)
Contributors
Claymore1297, eyosen, k4y0z
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: 4.x
Based On: AOSP
Version Information
Status: Stable
Created 2019-09-14
Last Updated 2020-11-01
new vendor-partition
We are introducing in Android 10 a vendor partitionon hima. So please follow the OP and install the linked TWRP, til @Captain_Throwback will release a official version.
So hima is not treble, but has a smell of treble
Also please note, that android Q introduces System-As-Root (SAR), so flashing GAPPS will only work properly with the linked TWRP.
There is also a GAPPS linked that will work with Q until official GAPPS are released.
*reserved3*
Reserved #4
Thanks
"The ROM should contain everything you need to enjoy Android Pie."
Please fix the Pie name ...
I currently use AICP 14 Does the procedure detailed in the OP help me to update safely?
How stable is this version?
PS: Thanks for the hard work.
Thanks so much for your hard work, keep up :good:
shadowalker2014 said:
Thanks so much for your hard work, keep up :good:
Click to expand...
Click to collapse
we worked now 4 days + nights without break, so thanks!
there is a warning after the device has been boot up - you can just ignore this for now!
Ok thanks, will give it a go when I got back home ?
Claymore1297 said:
there is a warning after the device has been boot up - you can just ignore this for now!
Click to expand...
Click to collapse
Did I really need your twrp ,since I installed it I've been getting this msg while trying to flash the new beta unfortunately
**Forgot pic**
DaveedDB said:
Did I really need your twrp ,since I installed it I've been getting this msg while trying to flash the new beta unfortunately
Click to expand...
Click to collapse
The old TWRP should work OK for installing the ROM, but it won't work for Backup/Restore and installing GAPPS etc.
So it's advised to update to this version.
EDIT:
Just saw your pic.
You're trying to flash the wrong ROM.
This is for himaul, you have a himawl
Head here
k4y0z said:
The old TWRP should work OK for installing the ROM, but it won't work for Backup/Restore and installing GAPPS etc.
So it's advised to update to this version.
EDIT:
Just saw your pic.
You're trying to flash the wrong ROM.
This is for himaul, you have a himawl
Head here
Click to expand...
Click to collapse
Just realized as well thanks
Thank you very much
Just installed this version and so far everything super good , without complaints of any kind. There really is no way to thank you enough for the hard work you have developed, and in such a short time as well.
I am Spanish speaker, excuse my Google Translator English .
Claymore1297 said:
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and we was based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
For Android 10 we are now full AOSP-based.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@Maxwen and the rest of the OmniRom team
DU team
SlimRoms team
Resurrection Remix team
Community
...
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build nightlies/weeklies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Download-Links:
ROM: https://mirror.codebucket.de/claymore1297/AICP/15.0/himaul/
TWRP: https://mirror.codebucket.de/claymore1297/TWRP/
GAPPS: https://mirror.codebucket.de/claymore1297/GAPPS/
Please note that official builds will be deleted from our servers every month due to maintenance services.
We advise everyone to keep at least the latest or best working build on their device as a backup.
Maybe copy it to a cloud service or USB too.
Whats working
-wifi
-mobile data
-camera
-bluetooth
-NFC
-audio
-DT2W
-AICP Themes
Whats working
- mobile data signal strength
- encryption
-gps
-DT2S
FAQ:
Before using the ROM:
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Xposed is not yet released for Pie, however you can try to use edxposed .
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid backup first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Pie. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work).
6. Reboot and set up your device, enable developer settings and in them OEM unlock/Advanced reboot/USB tethering.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
Currently supported Root Solution:
Magisk stable
Magisk versions >= 17.2 don't usually need to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time, unless your maintainer says otherwise, you should be fine.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest TWRP recovery, keep in mind that this could also be an unofficial version!
On encrypted devices you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/AICP/kernel_htc_msm8994
Device tree source:
https://github.com/AICP/device_htc_hima-common
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds[/B]
Contributors:
@Claymore1297
@k4y0z
@eyosen
The following information is ONLY needed if you are not opening up a devdb thread on XDA!
ROM OS Version: 10.0 Android 10
Kernel: Linux 3.10.108
Requirements
HTC Firmware: 4.x
TWRP: 3.3.0
Version Information:
Status: BETA
Release Date: 14-09-2019
You want to see a "normal" night at the "DEV office", click here!!
XDA:DevDB Information
AICP 15.0, ROM for the HTC One (M9)
Contributors
Claymore1297, eyosen, k4y0z
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: 4.x
Based On: AOSP
Version Information
Status: Beta
Created 2019-09-14
Last Updated 2019-09-14
Click to expand...
Click to collapse
I can't seem to install magisk, I'm on v19.3 and it installs with no errors. However after a reboot the phone will show the HTC logo, then restart.
As in, the logo will display but it wont get to the ROM boot animation, just reboot and display the HTC logo again as if there was no ROM installed.
NoChill said:
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and we was based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
For Android 10 we are now full AOSP-based.
I can't seem to install magisk, I'm on v19.3 and it installs with no errors. However after a reboot the phone will show the HTC logo, then restart.
As in, the logo will display but it wont get to the ROM boot animation, just reboot and display the HTC logo again as if there was no ROM installed.
Click to expand...
Click to collapse
Me too. In addition to that just after the system boot successfully it gives me an error message saying that my device has an internal fault and to contact the manufacturer.
ayoobelmasry said:
Me too. In addition to that just after the system boot successfully it gives me an error message saying that my device has an internal fault and to contact the manufacturer.
Click to expand...
Click to collapse
The error message is known issue u can just ignore it.
ayoobelmasry said:
Me too. In addition to that just after the system boot successfully it gives me an error message saying that my device has an internal fault and to contact the manufacturer.
Click to expand...
Click to collapse
Read previous page ,op said ignore for now
After installing the custom twrp, I can't wipe data, cache, and dalvik because of the error message: "failed to mount /carrier (invalid arguement)"
What do I have to do guys?
ѕαмαя νιѕρυтє
ALL CREDIT TO SAMARV-121
Original on samarv121.cf/lineageos-19.0-m20lte/
LineageOS is a free, community built, aftermarket firmware distribution of Android 12, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Features
Enforcing SELinux
AES-256-XTS File Based Encryption (FBE)
Passes SafetyNet out-of-the-box
Signature spoofing support (for microG)
Google Sans as a default font
Monet theme engine customizer (Display settings)
Fast charging disabler (Battery settings)
High touch sensitivity Mode (Display settings)
Swipe fingerprint for notification (Settings->System->Gestures)
Ambient display gestures (Settings->Display->Lockscreen->Ambient Display)
Known issues
IMS (VoLTE,ViLTE,VoWiFi)
Wide angle camera
Reporting Bugs
Don’t report bugs if you have any custom kernel or module installed
Create new issue here or Report it here.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you’re doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Changelog2022-01-09
January ASB (android-12.0.0_r26)
Implemented almost every LineageOS feature
Added seperate built-in gapps build
Replaced AOSP Camera app with GrapheneOS Camera
Passes SafetyNet out-of-the-box
Unshipped Pixel Launcher and GBoard from Vanilla build
Added option to disable Fast charging (Battery settings)
Added option to enable High touch sensitivity Mode (Display settings)
Added LiveDisplay (Display settings)
Added setting to manually customize monet theme engine (Display settings)
Unlimited Google Photos storage
2021-12-102021-11-20
ScreenshotsExpand
Device info
Kernel - 4.4.x
Chipset - Exynos7904
Telegram channel
Click here
Support group
Click here
InstructionsIf you are coming from stock ROM or any custom ROM
Boot into custom recovery
Format data
Flash latest build
Flash gapps package (optional)
Reboot your device once the installation is done
If you are already on LineageOS-19.0
Boot into custom recovery
Flash latest build
Reboot your device once the installation is done
FAQsI’m getting bootloop
Don’t flash any additional package if you are flashing
FORMAT data (not WIPE)
TWRP isn’t booting after flashing this rom
Yeah, It’s not supported. just reboot your device. Lineage Recovery will automatically get installed.
MTP not working
Disable USB debugging from developer options if you have it enabled.
Safetynet is failing after rooting the device
If you are on Magisk 23.0:
Enable MagiskHide from Magisk Manager app
If you are on newer version (Zygisk):
Enable “Zygisk” option from the Magisk Manager app
Reboot your device
Enable “Enforce DenyList” option
Go in “Configure DenyList”
Enable “Show system apps” option then search ‘Google Play Services’ and tap on it (but NOT on the tick box!) to expand activities
Enable “com.google.android.gms” and “com.google.android.gms.unstable”
Downloads
LineageOS-19.0(Vanilla) - Download
LineageOS-19.0(Gapps) - Download
Lineage Recovery - Download
Hi. There's a new build almost everyday. Where can I find the change log?
Could IMS and Wide Angle Camera work on future builds or is it next to impossible?
Hi ..
I m looking for a custom Lineage os for my Samsung m20 .UI : core 2 . M20 - DS20F , can you help me with this .