I'm not sure where else to put this, and I haven't managed to find any solutions in any of the other threads about this, so hopefully some of you knowledgeable folks can help.
On my S4, then S6 Edge I had a Tasker profile to turn on Do Not Disturb automatically when I plug my phone in to charge at night, and it worked a treat.
Now with the S8, no matter what I try, it still vibrates and activates the LED notification, even though it is showing as Do Not Disturb mode on, and in the settings I have ticked all the options to hide notifications when the screen is on, and off, and set no exceptions, or alarms only with the same result.
Any ideas?
Should I just try a different configuration in Tasker that doesn't actually use the Samsung 'Do Not Disturb' mode? Like I had on the S4, before there was a Do Not Disturb option?
I have even tried it with Tasker disabled, and just the system Do Not Disturb mode enabled, but it still disturbed..
In Tasker set Do Not Disturb to Alarms if you want to get the alarms sound only.
Other options:
None = NO sound at all - all muted
Priority = As set in settings
All = All sounds/vibration are audible (on/unmuted) = back to normal
Alarms = only alarms are audible
The variable controlling the Do Not DIsturb in Tasker is %INTERRUPT. As far as I know, the LED notification doesn't have anything to do with Do Not Disturb mode.
If none of the above works as intended (no vibrations), try using Sound Mod Plugin instead. I had mixed results with it in Nougat, but it's worth giving it a try.
Related
What I'm looking for is any ideas or suggestions on how to make Lollipop behave more like KitKat did for notifications with a Pebble.
What I used on Kitkat:
- Pebble watch for all notifications (using the Pebble software and Pebble Notifier to send all/most notifications to the watch)
- Phone on Silent mode
- Alarms ring on phone
This is a good combination for me as the phone stays quiet and the Pebble lets just me know what is going on.
On Lollipop
I want the same kind of setup now, but the lack of Silent mode makes this harder to achieve. I do know the trick to set the volume one above Vibe then reboot, and that does work... but it's a kludge.
- the Priority Interruptions actually silence all pebble notifications, so I have to keep it to All to get it, which then causes the phone to vibe too (unless I do the reboot trick).
So, does anyone have a combination of settings that makes this work like the KitKat days?
Here are a few thoughts on dealing with this. I use Llama or Tasker to get silent mode. Turning on silent mode in either of these turns on priority mode and then I use them to set the notification volume to 0. I have some Tasker stuff to toggle this from the pebble, and it's quick to switch profiles from the Llama notification on the phone for where location profiles don't already do what I need.
As to priority mode preventing pebble notifications, that can be avoided too. The gmail and calendar and call notifications work fine with the pebble app. I use light flow (but notification center should work too) for third party notifications. You have to add the application that forwards notifications to the list of apps that can notify in priority mode. So in addition to hangouts and other apps that I want to receive notifications from, I set light flow notifications to priority mode too (and in light flow I disabled their persistent notification because I don't need it).
I never leave priority mode on the phone, I just change the notification volume through profiles in the above apps. It works fine, and I get all notifications on the pebble.
Hope this helps.
Edit: And this does the right thing for alarms, since alarms are always priority.
I'm doing the same thing basically - I had Tasker rules to silence the phone (alarm volume = 0) in certain conditions, and when I upgraded to Lollipop they still worked. Not free, but it's workable. There are still some issues though that I haven't figured out, I'm not sure Tasker can un-slient a phone in that state (volume buttons will override) and of course Tasker doesn't know about the various priority modes at all yet.
I have the T-mobile S7.
Ever since I got my S7 when I have my phone on silent or vibrate, when an email comes in with my Gmail the notification sound plays. I have work email on my phone, but those new emails don't play through when on silent. Some other notifications also play through. I think from Google Hangouts and TXT messages. And I think Visual Voicemail notifications.
I can't seem to find anyone talking about this in my research. I have had several OTA updates from T-mobile and the issue is still there. I can't seem to figure out why some things have notifications that sound when the phone is in silent and vibrate mode. I have never had a phone do this before.
UPDATE: 2016.04.10
I still have the issue. I attached a screenshot of what is going on. The Media volume slider is not muting when I switch to Vibrate or Silent modes. The phone has had several OTA updates since I bought it and this still doesn't get fixed. I have the Moto G 3rd gen with Marshmallow as well and it doesn't have this issue. never had a phone with this issue. I am getting really tired of the work around, which is to manually mute and unmute the Media volume which takes several steps each.
I have two S7's and both have this issue.
Also, please don't suggestion the Do Not Disturb feature. Unless there is a way to have a simple toggle on and off of that feature with a pre-set of Total Silence, that solution does not help. So insane that silent mode is NOT silent!
Looks like I can toggle the DND shortcut and have moved it near the Mute/Sound/Vibrate button. Set DND to Total Silence. But still researching to see if the settings I use in the toggle affect the scheduled DND settings. As I only want Total Silence with the toggle, but at night I want my custom DND settings via the Scheduled DND.
Use macrodroid, e-robot or any other tasker-like app.
For MacroDroid, this particular macro does NOT require root:
1) Trigger volume button down, continue
2) Action Set music volume to media slider value 0
3) Constraint ringer volume is silent or vibrating
The above works ONLY when you use the volume down button. When the ringer volume reaches 0, it will also zero the media volume. It won't work if you use the Sound mode to change the ringer to silent or vibrate. You can program another macro to do the un-mute as well.
There are also other ways, such as through macro that is triggered by screen off, and change the media volume to 0 using the constraint of ringer volume being 0. This will work with Sound mode or DND, just not not immediately but when the screen turns off.
Sorry, I am looking for a stock method to this issue. Otherwise I think the general forum area would be a better place for me to ask about 3rd party apps. Right now I am still testing the DND options now that I see that I can toggle DND from the pulldown without having to choose DND options each time.
Darn it! DND is useless for this issue. If I leave the Sound toggle alone and on Sound, the DND does not affect things like unlock sound, key sounds, etc. etc. Silences calls and alarms, but the "total silence" option is NOT total silence. So I am still looking for a stock way to toggle mute and unmute of the entire sound system.
I just purchased a Note S8 and I'm having the same problem. There needs to be a simple and instant mute button so that if you need to mute in a hurry you can. If I am not overlooking it, it's ridiculous that they don't have them on these phones. I am used to using a Motorola and they always have had an easy way to quickly turn the sound off of my phone. The only way with this one is to hold down on the volume button and with a case it makes it even more difficult. I guess I'll just sit on it. $1000. Right.
del
Yeah, it's crazy. I now have 7.0.1 on my S7 and still no quick mute toggle with stock Android. And all my previous Android phones had a mute function that muted everything. Holding the volume button down does not mute all sounds. You have to press up or down, then mute the first slider which mutes all but Media, and then mute the media slider. THEN it's full silent. But I don't understand why it doesn't mute ALL sliders with 1 toggle via stock like it did on other phones.
the issue is still there on Galaxy S9....so freakin annoying
@sdho , yeah, it's insane! Android Oreo 8.x and we still don't have the simple mute function we had with much older versions of Android! By default muting should mute the Media slider too! If people want to only mute other sliders, THAT is what should then require the 2nd shade expansion to pick individual sliders. But 1 touch mute and vol down all the way, should mute ALL sliders by default.
I don't understand the programming decision to make the default the way it is!
PS: I now have the S9 Plus since launch.
Solved!
Just downloaded "Media Mute". Solved everything right away.
Thanks Choobaka, I now have Android Oreo 8.x with the Galaxy S9 Plus and still no improvement to stock 1 -swipe and touch mute. But thanks to your suggestion, while this can't be solved stock. At least it can now be solved without root and without any odd permissions. Thanks a ton. Trying it out now. So far it looks like that will do the trick for me.
Hi, I've set the DnD mode to turn on and off automatically based on time, so I don't get woken up in the middle of the night by a notification. However, when I wake up, and the DnD mode has supposedly been turned off, notifications are still silent. The DnD symbol does not appear on the watch, yet notifications are silent. I have to turn DnD on then off again for it to work. Does anybody else have this problem? And does anybody know how to solve it? Thanks!
Hello all,
I use Smart connect to put my phone into 'Do not disturb' over night while i sleep. However, since one of the last updates i have noticed that this does not mute notifications, it sort of pauses them until the phone reverts back to normal sounds and then all the notification sounds come through.
I just want to check if this is just me or is anyone seeing this strange behaviour. It didn't used to do that and its a pain when my phone jumps back to normal and i get all sorts of different apps pinging away at the same time.
Cheers
Bump....
Anyone else noticed this?
Yes, the same thing happens on my phone as well. It is to be expected though, or do you want to lose all your notifications?
In case the sounds it makes after dnd is over annoy you, you have to set the notification/call volume before you go enter dnd, as that previous value gets restored in the morning.
local__hero said:
Yes, the same thing happens on my phone as well. It is to be expected though, or do you want to lose all your notifications?
In case the sounds it makes after dnd is over annoy you, you have to set the notification/call volume before you go enter dnd, as that previous value gets restored in the morning.
Click to expand...
Click to collapse
Thanks for the reply, good to know its not just me.
The thing is I get up at 04:30, so when my phone comes out of dnd, I sometimes get a dozen notifications just pinging away. The 'correct' way I want it to work is that the notification appears but it just silences the notification not wait until dnd is over to give them all at once. Thanks, I will have a play around with notification sound.
You can adjust the behaviour of DND on quite a granular level. Go to Sounds -> Do not disturb -> Notifications -> Custom and choose "Don't turn on the screen", "Don't blink light", 'Don't wake for notification".
You can also adjust who gets to call you during DND and whether you want Alarms to sound.
Hi everyone,
I'm finding that the standard alert slider behaviour (ring / vibrate / silent) is not useful, as it's hard for me to go into Do Not Disturb mode. In the old OnePlus models this was standard, but now it's not available. I can't quite understand that, as DND is objectively better than Silent since it can do everything Silent can do plus more configurability. Anyways...
Is there any way to mod this behaviour back into the phone? I.e. is there a custom ROM or otherwise that supports modifying the alert slider behaviour? Any other ways? I read about using Tasker to read the state of three_Key_mode but this doesn't seem to work for me.
Thanks in advance,
Douglas
OK, so with a bit of playing around in Tasker, I finally got this working.
The Custom Setting to look for is the "oplus_mode_ringer" which, when set to 0, indicates that you have the slider set to Silent.
Then in your task, you first need to set DND. Then you need to set mode_ringer to 2 and alert_slider_mode to 3 if you want to retain the ringing.