Database Info

Stock firmware and stock recovery

CAN SOMEONE PROVIDE THE LINKS AND METHOD THANKS

Prateek1224 said:
CAN SOMEONE PROVIDE THE LINKS AND METHOD THANKS
Click to expand...
Click to collapse
seriously, look for it. it's posted in plain sight!

Hey! here are the links
Tuturial:
http://forum.xda-developers.com/2015-moto-g/general/guide-fastboot-flashing-factory-t3187750
Downloads:
http://forum.xda-developers.com/2015-moto-g/general/index-moto-g-factory-firmware-images-t3169639
---------- Post added at 04:37 PM ---------- Previous post was at 04:35 PM ----------
hp420 said:
seriously, look for it. it's posted in plain sight!
Click to expand...
Click to collapse
Some people are to busy to spent 2 minutes of their lives to look for things,
(but they heve the time to make this whole post to ask for it)
:good::good::good:

And those lazy ones are usually the ones that don't follow directions and then beg for help un-bricking their phone.
Sent from my SM-T530NU using Tapatalk

reverting to stock?

I am currently on pure nexus rom . Could anyone plzz tell me how to revert back to stock??

123cyborg said:
I am currently on pure nexus rom . Could anyone plzz tell me how to revert back to stock??
Click to expand...
Click to collapse
https://developers.google.com/android/images
---------- Post added at 04:43 PM ---------- Previous post was at 04:42 PM ----------
Do this.

jasonsamms666 said:
https://developers.google.com/android/images
---------- Post added at 04:43 PM ---------- Previous post was at 04:42 PM ----------
Do this.
Click to expand...
Click to collapse
Yeah i am familiar with this... Just wanted to know if there is something else to be done since i am rooted

123cyborg said:
Yeah i am familiar with this... Just wanted to know if there is something else to be done since i am rooted
Click to expand...
Click to collapse
Just fallow these instructions exactly. Don't lock your bootloader until you are fully stock.

123cyborg said:
I am currently on pure nexus rom . Could anyone plzz tell me how to revert back to stock??
Click to expand...
Click to collapse
Please report your own post using the exclamation point in a triangle /!\ in the bottom left corner of your first post in this thread and ask a moderator to move this to the Q&A section.

Mate 9 US 2.1, Huawei lied?

Your thoughts are welcome
http://www.androidauthority.com/huawei-mate-9-removes-mention-ufs-2-1-766214/

I suspect they are deceiving consumers，for details，you can see my thread
https://forum.xda-developers.com/mate-9/how-to/discussion-mate9-flashfrom-china-t3597767

Huawei has now added it's 2.1 ufs back to their website,they claim it was removed whilst they checked mate 9 did indeed have it

cnutt1 said:
Huawei has now added it's 2.1 ufs back to their website,they claim it was removed whilst they checked mate 9 did indeed have it
Click to expand...
Click to collapse
Could we get a link to their statement please? If they did that, it's quite an interesting development!

link
Swan Princess said:
Could we get a link to their statement please? If they did that, it's quite an interesting development!
Click to expand...
Click to collapse
The thread 1# had the link of the newsreport.
http://www.androidauthority.com/huawei-mate-9-removes-mention-ufs-2-1-766214/
---------- Post added at 03:26 PM ---------- Previous post was at 03:22 PM ----------
Swan Princess said:
Could we get a link to their statement please? If they did that, it's quite an interesting development!
Click to expand...
Click to collapse
But now Huawei has modified the page again,you may be able to find this information on google snapshot cache.

Huawei ufs 2.1
Swan Princess said:
Could we get a link to their statement please? If they did that, it's quite an interesting development!
Click to expand...
Click to collapse
http://www.flashfly.net/wp/?p=181792
---------- Post added at 03:07 PM ---------- Previous post was at 02:31 PM ----------
http://uk.mobile.reuters.com/article/idUKKBN17U1ZQ

vipivj said:
Your thoughts are welcome
http://www.androidauthority.com/huawei-mate-9-removes-mention-ufs-2-1-766214/
Click to expand...
Click to collapse
Please see this:
https://forum.xda-developers.com/mate-9/help/guide-method-to-flash-part-to-ufs2-0-t3598938

[QUESTION] What I have to know AFTER update my phone?

Hello.
I'm kind new to Samsung phones, so I need some help. I bought a branded phone, and it don't have the Nougat update because is from my operator.
So, I want to know what I have to do AFTER update it manually or via "software update" on phone or from Mobile Switch (Samsung support tell me to use it, but it don't update my phone).
I saw some info on "software update" on my phone, like "version G610MUBU1AQF3 / G610MZVV1AQF1 / G610MUBU1AQF1". I guess this must be changed to get an update, right?
What I have to do? I know I have to use ODIN to manually update, but to avoid problems (like kill or brick while in warranty), I need information on how to update correctly.
Thanks in advice!

Update From ODIN Will Change Your CSC, For Check For Update, Just Go To Settings And Click Software Update, Sorry If Im Wromg. Senior Member Please Help

JonathanFreeze said:
Update From ODIN Will Change Your CSC, For Check For Update, Just Go To Settings And Click Software Update, Sorry If Im Wromg. Senior Member Please Help
Click to expand...
Click to collapse
So, I just flash the new ROM with ODIN? No need to change something manually?

Update Trough Software Update
---------- Post added at 02:48 PM ---------- Previous post was at 02:47 PM ----------
If Your CSC Changed You Will Be Can Not Use Your SIM

JonathanFreeze said:
Update Trough Software Update
Click to expand...
Click to collapse
Thanks again, but, as I sayed, software update on my phone says already updated. Smart Switch don't find an update also.

romulocarlos said:
Thanks again, but, as I sayed, software update on my phone says already updated. Smart Switch don't find an update also.
Click to expand...
Click to collapse
Same problem.did you found any solution
Sent from my SM-G610F using XDA-Developers Legacy app

JonathanFreeze said:
Update Trough Software Update
---------- Post added at 02:48 PM ---------- Previous post was at 02:47 PM ----------
If Your CSC Changed You Will Be Can Not Use Your SIM
Click to expand...
Click to collapse
Even if I use a ROM from my country?
macklon said:
Same problem.did you found any solution
Sent from my SM-G610F using XDA-Developers Legacy app
Click to expand...
Click to collapse
Not for now.

If You Force To Get Nougat You Should Update With ODIN

JonathanFreeze said:
If You Force To Get Nougat You Should Update With ODIN
Click to expand...
Click to collapse
OK. But I just flash or I need to do something else to avoid any problems?
Thanks

Hmm I Dont Know, Make Sure You Dont Have Any Important Data, Because It Will Wipe All Your Data

JonathanFreeze said:
Hmm I Dont Know, Make Sure You Dont Have Any Important Data, Because It Will Wipe All Your Data
Click to expand...
Click to collapse
I know about that. No problem.
I'll wait for a confirmation.
Thanks!

Ok Update It
---------- Post added at 11:48 AM ---------- Previous post was at 11:47 AM ----------
Make Sure You Have Same Models With The Firmware

JonathanFreeze said:
Ok Update It
---------- Post added at 11:48 AM ---------- Previous post was at 11:47 AM ----------
Make Sure You Have Same Models With The Firmware
Click to expand...
Click to collapse
This is the problem: I can't find Nougat ROM with same numbers I posted!

Hey im found it
---------- Post added at 12:29 PM ---------- Previous post was at 12:28 PM ----------
https://www.sammobile.com/firmwares/SM-G610M/
---------- Post added at 12:31 PM ---------- Previous post was at 12:29 PM ----------
Or Fast Link https://updato.com/firmware-archive-select-model?q=SM-G610M&exact=1&r=&v=Nougat(Android+7.0)&rpp=15
---------- Post added at 12:34 PM ---------- Previous post was at 12:31 PM ----------
Same Models With Diffrent Number Is Ok

JonathanFreeze said:
Hey im found it
---------- Post added at 12:29 PM ---------- Previous post was at 12:28 PM ----------
https://www.sammobile.com/firmwares/SM-G610M/
---------- Post added at 12:31 PM ---------- Previous post was at 12:29 PM ----------
Or Fast Link https://updato.com/firmware-archive-select-model?q=SM-G610M&exact=1&r=&v=Nougat(Android+7.0)&rpp=15
---------- Post added at 12:34 PM ---------- Previous post was at 12:31 PM ----------
Same Models With Diffrent Number Is Ok
Click to expand...
Click to collapse
Thanks for information. Nougat isn't available for Brazil, but I'll download for another country. I'll update this post.

Good Luck :good:

JonathanFreeze said:
Good Luck :good:
Click to expand...
Click to collapse
Phone updated! No problems until now.
I have used Panama ROM. The first screen is in Spanish, but it can be changed.
I used this guide: http://techbeasts.com/install-galaxy-j7-prime-android-nougat-official-update/
Very thanks!

No Problem Bro.
---------- Post added at 09:03 AM ---------- Previous post was at 08:59 AM ----------
I Used The Indian Firmware Too For My J710FN

Oreo update.zip (OWDD.180122.013)

Can someone post the Oreo update.zip (OWDD.180122.013) for the LEO-BX9?

cdkg said:
Can someone post the Oreo update.zip (OWDD.180122.013) for the LEO-BX9?
Click to expand...
Click to collapse
Here you go:
https://www.androidfilehost.com/?fid=818070582850495467
---------- Post added at 09:48 PM ---------- Previous post was at 09:45 PM ----------
billybong10 said:
Here you go:
https://www.androidfilehost.com/?fid=818070582850495467
Click to expand...
Click to collapse
I have it listed under sawshark on AFH b/c there is no sawfish option. It is for sawfish.

billybong10 said:
Here you go:
https://www.androidfilehost.com/?fid=818070582850495467
---------- Post added at 09:48 PM ---------- Previous post was at 09:45 PM ----------
I have it listed under sawshark on AFH b/c there is no sawfish option. It is for sawfish.
Click to expand...
Click to collapse
Awesome, thanks

cdkg said:
Awesome, thanks
Click to expand...
Click to collapse
Here are the boot, recovery, and system images in case you want them.
https://www.androidfilehost.com/?fid=818070582850494249

Thank you @billybong10 the .img were exactly what I was looking for

cdkg said:
Thank you @billybong10 the .img were exactly what I was looking for
Click to expand...
Click to collapse
I figured

billybong10 said:
I figured
Click to expand...
Click to collapse
Hi, I just got my sawfish today. And this is my first Android wear device.
I want to update my watch to OREO, now it's still on 2.9, 7.1.1.
But everytime I open my system update menu, it shows a blue screen with a circle, but I think it's not progressing. Don't know why. The previous update process from 2.0 to 2.9 did run very well.
So, do I need to update it manually? Which files do I need? Update.zip? Or boot, recovery and system image files? What is the different between them?
And how to do it?
Thank you very much
Edit: just found the solution in another thread. That is to turn off BT and connect to WiFi. Now the update process is starting to work

great. Mine always fail with auto update, hope this one will do.
---------- Post added at 11:32 AM ---------- Previous post was at 10:58 AM ----------
thank you. Is the file sth like this? HUAWEI WATCH 2 BT_Update_NXH20B_release.exe, as mine always failed with the auto update?
Update: Just download and find the update.zip, what step should I do to update with it?