Related
Hi guys android newbie here! My friend rooted my Nexus 5 and it was working fine for a couple of weeks. Yesterday I tried to open SuperSU and it didn't work! Other apps that required root didn't work either.
I have been looking around and it seems OTA updates may have screwed up my root. Every time I try to open SuperSU it says: "There is no SU binary installed, and SuperSU cannot install it. This is a problem!" If you just upgraded to Android 4.3 (I have 4.4), you need to manual re-root. Consult the relevant forums for your device!" I have used root checker by joeykrim and it says "Sorry! this device does not have proper root access" (to confirm my root is busted).
My question is, is there any way to fix this without re-rooting? If I have to re-root, can I just directly re-root it again using something like Wugs rootkit?
Thank you very much in advance!
Just flash the newest version of supersu and you'll be good to go..... http://download.chainfire.eu/370/SuperSU/UPDATE-SuperSU-v1.80.zip
go to the play store, find supersu, install/update it, open tbe app and update your binaries.
simms22 said:
go to the play store, find supersu, install/update it, open tbe app and update your binaries.
Click to expand...
Click to collapse
I've tried to insyall /uninstall, wiping the cache and data with no luck. Right when I open the app the supersu binary problem comes up and I can't even get into it!
seyba said:
I've tried to insyall /uninstall, wiping the cache and data with no luck. Right when I open the app the supersu binary problem comes up and I can't even get into it!
Click to expand...
Click to collapse
cant even get into it?
Yea it says there is no SU binary installed. I think I've lost root access
seyba said:
Yea it says there is no SU binary installed. I think I've lost root access
Click to expand...
Click to collapse
flash this with your custom recovery, its the latest supersu http://download.chainfire.eu/supersu
bodooo said:
Just flash the newest version of supersu and you'll be good to go.....
Click to expand...
Click to collapse
I can install/update to v1.8! I just can't open it. Gives me a "SU binary not installed" when I do!
Did you install/update from the playstore or flashed the new update?
simms22 said:
flash this with your custom recovery, its the latest supersu
Click to expand...
Click to collapse
Sorry if this is a stupid question .. but how/ do I flash this or what program do i use?
My friend helped me root it so i have no idea on how to do this @@ Very sorry.
Hmmm... from the link I posted in one of my last post, you can just use a useful app called "flashify" and flash it that way (the easiest way) but you need that file that is in the link obviously to do so haha. So afterwards when in flashify you'll get 3 simple options, boot image, recovery image, and zip file. choose zip file, go into your downloads folder from the file explorer from the app (which it should be there if you downloaded it off your phone) and let the app do the rest
bodooo said:
Hmmm... from the link I posted in one of my last post, you can just use a useful app called "flashify" and flash it that way (the easiest way) but you need that file that is in the link obviously to do so haha. So afterwards when in flashify you'll get 3 simple options, boot image, recovery image, and zip file. choose zip file, go into your downloads folder from the file explorer from the app (which it should be there if you downloaded it off your phone) and let the app do the rest
Click to expand...
Click to collapse
Ok so I can't open flashify either. It also says I have lost root access and my superuser is busted. I have attached a screenshot!
http://i42.tinypic.com/2mgw0v6.png
Of course, you don't have root access, silly me lol Well guess we'll have to do it the hard way (it's not really that complicated) ok read carefully. Power off your phone, afterward hold the power and volume down buttons which should get you into the bootloader, cycle trough the options with the volume buttons and when you see recovery mode select it with the power button, now depending on which Recovery you have you'll have to choose the option that says install or install from sd card, again, depending on which one you have this will be slightly different. After doing i believe the paths will be the same, chose 0/ then look for the download/ folder which you should have that supersu.zip file, if you're using twrp recover it should be touch screen and you simply select it and swipe to install, if you're using cwm (which i do) you'' have to scroll with the volume buttons and select the file with the power button to install. I hope I was as clear as i could be, good luck
after going into recovery mode, there is just a android robot with his chest open and an exclamation mark! can't proceed after that.
Ouhhh you don't have a recovery then, do you have adb or any kind of toolkit?
I have wugs toolkit. but every time i try to do anything at all on it. It says ADB device not found? That seems to be preventing me from doing anything as well.
Do you have the adb drivers installed or/and usb debug turned on in developer settings?
how/where do i install adb drivers? I have not done so, and i doubt my friend did it when he rooted.
I do turn on usb debugging when i tried to unroot/root on wugs toolkit
In wugs toolkit it has a walk-through on how to do so, i suggest you use the RAW drivers option
I must be blind to not have seen this before. Thank you very much for your help I'll let you know how it goes!
Someone help me to root this brand-new smartphone, i tryed framaroot, kingo root and mtk droid root but with no sucess... Someone help me please
M3tt said:
Someone help me to root this brand-new smartphone, i tryed framaroot, kingo root and mtk droid root but with no sucess... Someone help me please
Click to expand...
Click to collapse
i looked around for some suggestions that might work, but sorry, i cant find any.
M3tt said:
Someone help me to root this brand-new smartphone, i tryed framaroot, kingo root and mtk droid root but with no sucess... Someone help me please
Click to expand...
Click to collapse
Just picked up a Neo 4.5 as a gift for someone today. Rooted & installed SuperSU binary & App w/ Framaroot v1.9.4. Maybe the version you tried didn't have the correct strings for the MT6572 yet. I believe it worked with Boramir.
i need root too
Need4Sneed said:
Just picked up a Neo 4.5 as a gift for someone today. Rooted & installed SuperSU binary & App w/ Framaroot v1.9.4. Maybe the version you tried didn't have the correct strings for the MT6572 yet. I believe it worked with Boramir.
Click to expand...
Click to collapse
I try but not work.
Can someone give me some advice or point me in the right direction please
M3tt said:
Someone help me to root this brand-new smartphone, i tryed framaroot, kingo root and mtk droid root but with no sucess... Someone help me please
Click to expand...
Click to collapse
Hi sir its been four months, did you find a way to root your blu neo 4.5? i desire to also, thanks in advance.
I'm also looking for help
Need4Sneed said:
Just picked up a Neo 4.5 as a gift for someone today. Rooted & installed SuperSU binary & App w/ Framaroot v1.9.4. Maybe the version you tried didn't have the correct strings for the MT6572 yet. I believe it worked with Boramir.
Click to expand...
Click to collapse
Could u possibly do a step by step walk through. That would really help .
Kingo Root instructions
mar_sm said:
Could u possibly do a step by step walk through. That would really help .
Click to expand...
Click to collapse
I´'ve rooted several BLUs with Kingo Root (just Google search for it and install it on your laptop). The challenge if you are a noobie is that sometimes you miss a step OR people assume that you know the basics, so they forget to tell you about some important steps that you must take before you root.
Instructions:
1. Install Kingo Root.
2. On your BLU, open Settings (make sure you have allowed applications to be installed from Unknown Sources...you'll find this option under Security in the Settings)..
3. In Settings, go to About Phone and rapidly click on the "Build Number" as many times as it takes to say, "You are now a developer". This will open a new option in the Settings called Developer Options.
4. In Settings, now go to Developer Options and make sure it is ON and also turn on the USB Debugging. VERY IMPORTANT!
5. Now connect your BLU to your computer via a USB cable and wait till all the drivers are installed and the device is READY TO USE.
6. Disconnect your phone from the computer.
7. Run the Kingo Root software.
8. Connect your phone to the computer (Kingo will eventually connect to the phone and then will show you a big ROOT button.
9. Click the big ROOT button and sit back till it does its thing.
10. Wait till Kingo gives you the "ROOTED!" message and then you are done (so go ahead and unplug your phone from USB and close Kingo Root software).
11. Reboot your phone and confirm root (download Busy Box Checker from Play Store). You might also want to download Busy Box X and install the busybox binaries..
OPTIONAL SUPERUSER:
You don't have to do this next part if you're happy with Kingo User.
Note that these days, Kingo Root will install a superuser (su) binary that is controlled by their own app called Kingo User instead of the SuperSU app. If you want SuperSU by Chainfire, you have to search XDA for BETA SuperSU 2.49. You'll find a zip file with a beta version of SuperSU and a script that will eliminate Kingo User and replace it with SuperSU.
Install BUSY BOX X on your phone (download from Play Store).
Place the SuperSU v2.49 zip on your SD card in the phone (IT MUST BE THE VERSION 2.49 NOT THE OFFICIL 2.46 OR THIS IS NOT GOING TO WORK). Then boot into recovery (to do that you turn your phone off and then after it is off, you restart it with the power button while you are holding down the volume UP button). Then you use the menu you find there to "Install a zip from SD card". Select the zip you just put on the SD card, and it will flash the SuperSU program and binaries to your phone, while deleting the Kingo User app and it's binaries. Now select Reboot System at the top of the menu and you're all done.
Need4Sneed said:
Just picked up a Neo 4.5 as a gift for someone today. Rooted & installed SuperSU binary & App w/ Framaroot v1.9.4. Maybe the version you tried didn't have the correct strings for the MT6572 yet. I believe it worked with Boramir.
Click to expand...
Click to collapse
Any chance you could PM me or mirror the 1.9.4 apk? I can't find it from a reliable resource online, and 1.9.3 did not root my new Neo 4.5. Tried several other rooting tools, none of which worked, so I'd love to be able to get my hands on the apk you used to do the root.
Thanks!
CVAngelo said:
I´'ve rooted several BLUs with Kingo Root (just Google search for it and install it on your laptop). The challenge if you are a noobie is that sometimes you miss a step OR people assume that you know the basics, so they forget to tell you about some important steps that you must take before you root.
Instructions:
1. Install Kingo Root.
2. On your BLU, open Settings (make sure you have allowed applications to be installed from Unknown Sources...you'll find this option under Security in the Settings)..
3. In Settings, go to About Phone and rapidly click on the "Build Number" as many times as it takes to say, "You are now a developer". This will open a new option in the Settings called Developer Options.
4. In Settings, now go to Developer Options and make sure it is ON and also turn on the USB Debugging. VERY IMPORTANT!
5. Now connect your BLU to your computer via a USB cable and wait till all the drivers are installed and the device is READY TO USE.
6. Disconnect your phone from the computer.
7. Run the Kingo Root software.
8. Connect your phone to the computer (Kingo will eventually connect to the phone and then will show you a big ROOT button.
9. Click the big ROOT button and sit back till it does its thing.
10. Wait till Kingo gives you the "ROOTED!" message and then you are done (so go ahead and unplug your phone from USB and close Kingo Root software).
11. Reboot your phone and confirm root (download Busy Box Checker from Play Store). You might also want to download Busy Box X and install the busybox binaries..
OPTIONAL SUPERUSER:
You don't have to do this next part if you're happy with Kingo User.
Note that these days, Kingo Root will install a superuser (su) binary that is controlled by their own app called Kingo User instead of the SuperSU app. If you want SuperSU by Chainfire, you have to search XDA for BETA SuperSU 2.49. You'll find a zip file with a beta version of SuperSU and a script that will eliminate Kingo User and replace it with SuperSU.
Install BUSY BOX X on your phone (download from Play Store).
Place the SuperSU v2.49 zip on your SD card in the phone (IT MUST BE THE VERSION 2.49 NOT THE OFFICIL 2.46 OR THIS IS NOT GOING TO WORK). Then boot into recovery (to do that you turn your phone off and then after it is off, you restart it with the power button while you are holding down the volume UP button). Then you use the menu you find there to "Install a zip from SD card". Select the zip you just put on the SD card, and it will flash the SuperSU program and binaries to your phone, while deleting the Kingo User app and it's binaries. Now select Reboot System at the top of the menu and you're all done.
Click to expand...
Click to collapse
I've tried Kingo Root, One Click Root, iRoot, towelroot, framaroot.... I tried lots of rooting methods
... Watched a lot of YouTube videos. I saw one in Spanish and the neo 4.5 is rooted, but I don't understand, and I'm sure its just a show n not a tutorial on how to root... Any help?
CVAngelo said:
I´'ve rooted several BLUs with Kingo Root (just Google search for it and install it on your laptop). The challenge if you are a noobie is that sometimes you miss a step OR people assume that you know the basics, so they forget to tell you about some important steps that you must take before you root.
Instructions:
1. Install Kingo Root.
2. On your BLU, open Settings (make sure you have allowed applications to be installed from Unknown Sources...you'll find this option under Security in the Settings)..
3. In Settings, go to About Phone and rapidly click on the "Build Number" as many times as it takes to say, "You are now a developer". This will open a new option in the Settings called Developer Options.
4. In Settings, now go to Developer Options and make sure it is ON and also turn on the USB Debugging. VERY IMPORTANT!
5. Now connect your BLU to your computer via a USB cable and wait till all the drivers are installed and the device is READY TO USE.
6. Disconnect your phone from the computer.
7. Run the Kingo Root software.
8. Connect your phone to the computer (Kingo will eventually connect to the phone and then will show you a big ROOT button.
9. Click the big ROOT button and sit back till it does its thing.
10. Wait till Kingo gives you the "ROOTED!" message and then you are done (so go ahead and unplug your phone from USB and close Kingo Root software).
11. Reboot your phone and confirm root (download Busy Box Checker from Play Store). You might also want to download Busy Box X and install the busybox binaries..
OPTIONAL SUPERUSER:
You don't have to do this next part if you're happy with Kingo User.
Note that these days, Kingo Root will install a superuser (su) binary that is controlled by their own app called Kingo User instead of the SuperSU app. If you want SuperSU by Chainfire, you have to search XDA for BETA SuperSU 2.49. You'll find a zip file with a beta version of SuperSU and a script that will eliminate Kingo User and replace it with SuperSU.
Install BUSY BOX X on your phone (download from Play Store).
Place the SuperSU v2.49 zip on your SD card in the phone (IT MUST BE THE VERSION 2.49 NOT THE OFFICIL 2.46 OR THIS IS NOT GOING TO WORK). Then boot into recovery (to do that you turn your phone off and then after it is off, you restart it with the power button while you are holding down the volume UP button). Then you use the menu you find there to "Install a zip from SD card". Select the zip you just put on the SD card, and it will flash the SuperSU program and binaries to your phone, while deleting the Kingo User app and it's binaries. Now select Reboot System at the top of the menu and you're all done.
Click to expand...
Click to collapse
I've attached a photo of my device info. Currently the device is locked to GT&T.
AgentNash said:
I've attached a photo of my device info. Currently the device is locked to GT&T.
Click to expand...
Click to collapse
I really hope that someone can show me how to root this phone
Stone Fist said:
I really hope that someone can show me how to root this phone
Click to expand...
Click to collapse
You still have not rooted your Neo 4.5? Can you give us a little more information? Respond to the following questions:
1. Have you turned on Developer Options on the phone?
2. Have you turned on USB Debugging in the Developer Options?
3. Have you installed the USB drivers for your phone?
4. Download and run MTK Droid Tools (as administrator). Just Google it and you will find lots of sources for the software (including here on XDA). Then connect your phone via USB cable. What message is shown on the bottom left corner of the MTK Droid window? Take a screenshot of your computer screen if possible and post it here.
Once you've answered these questions, we'll be able to help you.
Angelo
It is done
i root it
You have to use the latest version of Kingo root apk. and install it on your phone
Make sure u have the usual Debug mode on and to allow unknown apps ......it is simple and easy
try 360 Roo
Hi, for everyone trying to root blu neo 4.5, I have recently got my phone rooted and had tried all the other root apps out there, but the one that did the job is 360 Root, you can download it from google play store or just google it online and download. you should watch the video on youtube also, it's not in English but will still help you to understand the step by step process.
---------- Post added at 04:36 PM ---------- Previous post was at 04:30 PM ----------
drmarc said:
Hi, for everyone trying to root blu neo 4.5, I have recently got my phone rooted and had tried all the other root apps out there, but the one that did the job is 360 Root, you can download it from google play store or just google it online and download. you should watch the video on youtube also, it's not in English but will still help you to understand the step by step process.
Click to expand...
Click to collapse
so I've got my blu neo 4.5 rooted but there is no custom ROMs online to download, especially lollipop. if anyone knows where I can get custom Rom for blu neo 4.5 please let me know.
I was able to root my Blu Neo 4.5 with KINGROOT
http://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461
Lol. I rooted my phone with 360 root. A Chinese app and soon after the phone died because of a faulty charger.
Ways to root your Samsung Galaxy Tab 4 7.0All of the guys on the list is tested by me and it's working
For those guys who can't root their tablet, this thread is the right place for you
1. This is the Easiest Way to Root your tablet
KingRoot App Download it here
http://www.appsandroidapk.com/apk/kingroot-v4-6-2-apk-file-for-android/
Download the app
Before installing it Go to Settings > General Tab > Security > and Enable "Unknown Sources"
Install the app and Root your phone.
You might wanting to have a SuperSU instead of kingroot's SU
Google it SuperSU Me Download the latest version or you can find it here in this link
http://forum.xda-developers.com/general/paid-software/supersu-please-t3110954
Update the SUBinary
Reboot
2. KingoRoot App apk version
Download Link
https://root-apk.kingoapp.com/
Download the app
Before installing it Go to Settings > General Tab > Security > and Enable "Unknown Sources"
Set your device atleast 10 minutes before sleep due to inactivity
Install and Root your Device
Do nothing while rooting "Like tapping or bringing down the notification bar" this is why i make you set the 10minute-sleep
1st/2nd attempt might fail but on the other hand it will succeed
You might wanting to have a SuperSU instead of kingoroot's SU
Google it SuperSU Me Download the latest version or you can find the link here
http://forum.xda-developers.com/general/paid-software/supersu-please-t3110954
Update the SUBinary
Reboot
3. Root Using TWRP (old)
Requirements
TWRP link is here
http://forum.xda-developers.com/attachment.php?attachmentid=3128455&d=1421957427
Important: Odin3 v1.85 Direct download Link
http://forum.xda-developers.com/attachment.php?attachmentid=581913
PC
On your pc Open Odin3 v1.85
Click PDA and choose the tar file that you've downloaded
Tick Auto Reboot and F. Reset time
Now go to your device, Boot into download mode ( Power it off wait until it vibrates then press Home,Power and Volume Down Simultaneously)
Plug your device into your Computer (Install drivers here's the link http://www.mediafire.com/download/o3exocwabcxax3b/SAMSUNG_USB_Driver.exe)/ Some Pc install drivers automatically just wait them to install or if you already install the drivers skip driver installation procedure)
Click Start if the Odin detects your phone, your phone will automatically reboot
Now Boot your phone into Recovery Mode by (Turning it off and Press Power + Home + Volume up)
It will boot into TWRP
Press Reboot > System and it will ask you if you want to get root and swipe it to install
Update SuperSU and make another reboot
You can also update your TWRP using this zip file
https://www.androidfilehost.com/?fid=24052804347818249
Now if you really can't root your tablet and you're desperate, try another version of your stock firmware, you can find your stock firmware on Google, after that do this procedure again
Done.
Other Links to make your tab Rooted
http://forum.xda-developers.com/showthread.php?t=3111934
http://forum.xda-developers.com/tab-4/help/twrp-install-twrp-root-samsung-galaxy-t3095736
Developers that has credit on all of this
@BRoy_98
@pinksworld
@gatesjunior
and sorry if i haven't mentioned the others, i dont know who to give credits
SORRY SOME OF MY ENGLISH IS REALLY BAD
Yay another one, I think this is the fourth of this same exact thread
You might want to mention how kingroot/kingoroot send your personal data to Chinese servers and the twrp builds you linked to only work fur the SM-T230, SM-T230NU, and SM-T231, and will not work for any of the several other Tab 4 7" variants
Just imagine that I just put all those threads together ahaha: )
thisisapoorusernamechoice said:
Yay another one, I think this is the fourth of this same exact thread
You might want to mention how kingroot/kingoroot send your personal data to Chinese servers and the twrp builds you linked to only work fur the SM-T230, SM-T230NU, and SM-T231, and will not work for any of the several other Tab 4 7" variants
Click to expand...
Click to collapse
I dunno if that issue is real, but no worries we have supersu me
thisisapoorusernamechoice said:
Yay another one, I think this is the fourth of this same exact thread
You might want to mention how kingroot/kingoroot send your personal data to Chinese servers and the twrp builds you linked to only work fur the SM-T230, SM-T230NU, and SM-T231, and will not work for any of the several other Tab 4 7" variants
Click to expand...
Click to collapse
I dont think that if you install first supersu me and then kingroot your tab, after root turn wifi off and use supersu me, no data sent to anyone........ anyways it doesnt send your passowords etc to china, just like browser data and few app datas.... but theres no way to get passwords.... all are crypted or hidden well in smali
thelous said:
I dont think that if you install first supersu me and then kingroot your tab, after root turn wifi off and use supersu me, no data sent to anyone........ anyways it doesnt send your passowords etc to china, just like browser data and few app datas.... but theres no way to get passwords.... all are crypted or hidden well in smali
Click to expand...
Click to collapse
I wouldn't be sure about that. If you type in your password, once rooted, anything can easily capture the keyboard input and log it or send it out. Let me elaborate. It's like the guys who say, "Hey I have a firewall installed so it cannot communicate out." Yeah, o.k., so all the firewalls do is manage IPTABLES, so if I am an application and have root access, I can do what I want to avoid your firewall rules quite easily. Just a thought.
Hmm, updating the binary will remove the @#$%&* thing , we're just going to use the app to root our phone, and I guess wiping cache and dalvik is necessary
BTW tab 4 is best for gaming because of it looks and size but due to a stupid Samsung company, 1.2ghz + vivante gc1000 expect lagging, I hope some kind hearted will make a custom kernel for overclocking this tab.
BTW There's no Tex plugin on gltools, installing default will not work, so you have to find a cracked version of gltools, well if you do that... R.I.P expect force closes
gatesjunior said:
I wouldn't be sure about that. If you type in your password, once rooted, anything can easily capture the keyboard input and log it or send it out. Let me elaborate. It's like the guys who say, "Hey I have a firewall installed so it cannot communicate out." Yeah, o.k., so all the firewalls do is manage IPTABLES, so if I am an application and have root access, I can do what I want to avoid your firewall rules quite easily. Just a thought.
Click to expand...
Click to collapse
Well i didnt say anything about firewalls i was daying if you manually disable wifi and use king root, it wont be able to connect anywhere to send any data.... also you can search by date and time files made during root session and remove everything to prevent any keyloger to work
Have ODIN and a stock image ready!!!
Be careful with this root process! The sm-t237p 5.1.1 OH7 boot loops and won't hold the root or Philz recovery... Yet!:cyclops:
thelous said:
Well i didnt say anything about firewalls i was daying if you manually disable wifi and use king root, it wont be able to connect anywhere to send any data.... also you can search by date and time files made during root session and remove everything to prevent any keyloger to work
Click to expand...
Click to collapse
No. I can easily change the file and date stamp to match any given system file you already have so that it is not easy to find. Also, Kingroot will not run correctly and root your device properly if it cannot contact it's servers to download the proper exploit for your device. Now, if you are talking about disabling wifi only so that Kingroot cannot contact it's servers after you are rooted, well, if you use any data what so ever, it can use that same data connection. As an example, I have to have data of some type to login to my bank site, etc..
SM-T237P Specific maybe others with PhilZ recovery...
Root Success! Check this out... http://forum.xda-developers.com/showpost.php?p=64182938&postcount=15
gatesjunior said:
No. I can easily change the file and date stamp to match any given system file you already have so that it is not easy to find. Also, Kingroot will not run correctly and root your device properly if it cannot contact it's servers to download the proper exploit for your device. Now, if you are talking about disabling wifi only so that Kingroot cannot contact it's servers after you are rooted, well, if you use any data what so ever, it can use that same data connection. As an example, I have to have data of some type to login to my bank site, etc..
Click to expand...
Click to collapse
Well, atleast my bank account cant be logged with different ip and if its tried i recice message wheres code that you need write to bank website to access account.... however i havent lodt any accounts yet after rooting with kingroot, it has so manynusers that they cant check all information they recive, just like facebook and whatsapp... (they're spying watnu do but they have too many users so it would take like unlimited time to check all accounts and keybindings thru.....
K94U said:
Root Success! Check this out... http://forum.xda-developers.com/showpost.php?p=64182938&postcount=15
Click to expand...
Click to collapse
You can use any kind of cwm to flash a zip file that can root your device, This was an alternative way, just find a cwm to flash hehe
Siegharf said:
You can use any kind of cwm to flash a zip file that can root your device, This was an alternative way, just find a cwm to flash hehe
Click to expand...
Click to collapse
Flashing recovery trips KNOX (no warranty or OTA updates) and the other method sometimes doesn't... Also, the recovery/zip method stopped working on lollipop and marshmallow with the older SuperSU builds but... Chainfire has a new BETA SuperSU 2.6X that is a systemless root and now working on the newer Android builds using the recovery/zip method. This seems to work for mostly ALL Samsung and Nexus devices... Read about it here:
http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
I restored my nandroid backup in recovery just to try this on my sm-t237p lollipop and it worked the first time!!! All apps get root access OK except es file explorer(now bloatware anyway)... You might need to install busybox for things to work... :good: :laugh:
K94U said:
Flashing recovery trips KNOX (no warranty or OTA updates) and the other method sometimes doesn't... Also, the recovery/zip method stopped working on lollipop and marshmallow with the older SuperSU builds but... Chainfire has a new BETA SuperSU 2.6X that is a systemless root and now working on the newer Android builds using the recovery/zip method. This seems to work for mostly ALL Samsung and Nexus devices... Read about it here:
http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
I restored my nandroid backup in recovery just to try this on my sm-t237p lollipop and it worked the first time!!! All apps get root access OK except es file explorer(now bloatware anyway)... You might need to install busybox for things to work... :good: :laugh:
Click to expand...
Click to collapse
There's kies or custom ota flashing
K94U said:
Flashing recovery trips KNOX (no warranty or OTA updates) and the other method sometimes doesn't... Also, the recovery/zip method stopped working on lollipop and marshmallow with the older SuperSU builds but... Chainfire has a new BETA SuperSU 2.6X that is a systemless root and now working on the newer Android builds using the recovery/zip method. This seems to work for mostly ALL Samsung and Nexus devices... Read about it here:
http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
I restored my nandroid backup in recovery just to try this on my sm-t237p lollipop and it worked the first time!!! All apps get root access OK except es file explorer(now bloatware anyway)... You might need to install busybox for things to work... :good: :laugh:
Click to expand...
Click to collapse
235 LTE 5.1.1 rooted as well
http://forum.xda-developers.com/showpost.php?p=64255121&postcount=1
(not spamming in case anyone got the idea)
Hello everyone!
I would like to ask you something and i REALLY HOPE someone will be able to help me out.
I have a samsung s5 sm-g900f with Android 6.0.1 and i'm trying to root it.
Actually it was supposed to be rooted when i got it -it's my bf's phone. And...aaam i don't know if it's called "rooted" when it just have custom recovery and rom? I just call it that way-. Yesterday i installed root checker and Super SU and the Super SU keeps saying that "There is no SU binary installed and SuperSU cannot install it" and that if i have Android 5 i should re root manually and stuff.
I have tried like everything i have found on the net since yesterday, flashing with Odin, changing recovery from twrp to cwm, and all the time the steps are made by letter, all seems fine, i see the red pirate android after the recovery reboot and all that, have tried to install the UPDATE-zip and the BETA-zip and all i could find. I tried to install Kingroot but i couldn't figure out how. My recovery nor Odin can see the file to install it and then i try to do it manually, like all apps, it says could not be installed. :crying:
I got really tired and i cave in to ask for help here. I hope the post is in the right place and if it's not please move it where it should be!
Thank you in advance!
CloeNi said:
Hello everyone!
I would like to ask you something and i REALLY HOPE someone will be able to help me out.
I have a samsung s5 sm-g900f with Android 6.0.1 and i'm trying to root it.
Actually it was supposed to be rooted when i got it -it's my bf's phone. And...aaam i don't know if it's called "rooted" when it just have custom recovery and rom? I just call it that way-. Yesterday i installed root checker and Super SU and the Super SU keeps saying that "There is no SU binary installed and SuperSU cannot install it" and that if i have Android 5 i should re root manually and stuff.
I have tried like everything i have found on the net since yesterday, flashing with Odin, changing recovery from twrp to cwm, and all the time the steps are made by letter, all seems fine, i see the red pirate android after the recovery reboot and all that, have tried to install the UPDATE-zip and the BETA-zip and all i could find. I tried to install Kingroot but i couldn't figure out how. My recovery nor Odin can see the file to install it and then i try to do it manually, like all apps, it says could not be installed. :crying:
I got really tired and i cave in to ask for help here. I hope the post is in the right place and if it's not please move it where it should be! Thank you in advance!
Click to expand...
Click to collapse
Since you can flash custom recovery then your bootloader is already unlocked so....
Do a search for "flashing SuperSU.zip Galaxy S5" or you might need to search for "flashing SuperSU.zip in systemless mode galaxy s5". Flashing one of those should give you root and su binaries, after flashing, boot the device and open the SuperSU app and update the su binaries then reboot the device. Then after rebooting, you need to go to system settings>developer options>root access and set it to "apps and adb", then install a file manager that has a root explorer such as ES File Explorer, then open it, tap the menu button, go to the "TOOLS" tab, find "Root Explorer" and turn it on, then when you see the next menu, tap "Mount R/W", then set all listed partitions to "rw".
If you can access your SELinux profile, make sure it's set to "permissive" mode.
If you can get all of that set then you'll have access to modify and control pretty much anything you want about the device.
I DO NOT PROVIDE HELP IN PERSONAL MESSAGE, I DO NOT TAKE REQUESTS IN PERSONAL MESSAGE, YOU WILL BE IGNORED. KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
thank you!!!
i wont be able to try it for a few days but i'll try it as soon as i can and give you feedback on this!
So i'm trying to follow your instructions right now. I guess it's ok if i install recovery upon recovery and SU upon SU without first removing the "faulty" one?
Cause i have done the first steps a lot these days
edit: i flashed again aaaaaand nothing new happened. The SU binary is nowhere to be found :/
some say it could be a problem of the cable or the computer?
Should i try from a different pc and cable? I do not really understand it but i'll give it a try later
edit 2: i retried from another pc and another usb cable, the same happens. Does not install the SU through the recovery
I installed the SuperSU (actually enebled it again and updated it) from playstore and opened it and it says the sme thing again. Can't find su binaries and stuff.
What should i do? Is format a solution or can avoid it?
Hi.
This is my first post, I hope i'm in the correct forum.
I have a friend whom I requested to Root, Flash TWRP and Install LineagOS and GAAP on my OnePlus One phone.
He successfully flashed TWRP and installed LineagOS & GAAP but could not root my OnePlus One using SuperSu. He mentioned permission issue trying to root.
He went back to his country, so I am stuck trying to root my phone.
I would like to root my LineagOS (formally OnePlus One) using SuperSU.
I have downloaded/copied the latest SuperSu zip file into the Phone Sd/Download folder.
I went into custom recovery (TWRP).
Click on the Install button and verified I can see my SuperSu zip file.
Since this is my first time performing a phone root, I did not click SuperSu zip to install, until some experts can assist. me.
Just a few (Q's).
Questions:
a) Should I run any preliminary steps prior to clicking install SuperSu.zip?
b) Since I have LineagOS, GAAP apps already installed, will they be wiped after rooting SuperSu. If (Yes), any software available to backup/restore LineagOS & GAAP prior to the root process?
c) My friend mention “Permission problems with OPO”. Are there some options to open OPO and allow rooting SuperSu?
BTW: I do have the adb & fastboot installed if I need to enter some commands to get this done.
Thanks.
Tom.
a) No.
Download flashable supersu zip and flash it from here and flash it via TWRP https://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
b) No.
But you can take nandroid backup through twrp in case something goes wrong.
c) As far as I know there is no problem with "permission" for rooting.
Happy flashing
Hi psxda97.
I did your requested instructions, but still not Rooted.
Here are the steps I did:
1) Downloaded the latest SuperSu zip from XDA and copied to Sd/Download folder on my phone.
2) Went into Custom Recovery TWRP) on my phone.
3) Click Install, selected SuperSu.zip Swipe bar to continue.
Completed 181 seconds did not see errors.
4) Wiped Dalvic & Cache. Reboot the Phone.
When phone restarted I went into Titanium backup apps to test if Root was successful. Received error msg from Titanium "Could not acquire root privileges. This app will not work Verify your Rom is rooted and try again"
Not sure if this makes a difference: in Developers Option I had root access ADP Only enabled & allow Unknown Sources set off.
Since this is the second time running SuperSu should I needed to wipe any files before rooting?
I'll await you reply.
Thanks.
Tom.
tomx2x said:
Hi psxda97.
I did your requested instructions, but still not Rooted.
Here are the steps I did:
1) Downloaded the latest SuperSu zip from XDA and copied to Sd/Download folder on my phone.
2) Went into Custom Recovery TWRP) on my phone.
3) Click Install, selected SuperSu.zip Swipe bar to continue.
Completed 181 seconds did not see errors.
4) Wiped Dalvic & Cache. Reboot the Phone.
When phone restarted I went into Titanium backup apps to test if Root was successful. Received error msg from Titanium "Could not acquire root privileges. This app will not work Verify your Rom is rooted and try again"
Not sure if this makes a difference: in Developers Option I had root access ADP Only enabled & allow Unknown Sources set off.
Since this is the second time running SuperSu should I needed to wipe any files before rooting?
I'll await you reply.
Thanks.
Tom.
Click to expand...
Click to collapse
I think I'm missing something. Did you tried any other method to root? I recommend a clean flash.
1. Download Sultanxda's unofficial lineageOS from here
2. Download Gapps from here. ( ARM-7.1-nano)
3.Download SuperSU from here
4. [Optional] take back up of your apps (No need to back up medias like photo,video,etc)
5.Got Recovery>wipe>advanced wipe
select system,data,cache and dalvik cache (DO NOT SELECT INTERNAL)
6.flash the zips you already downloaded in this order - ROM- Gapps - SuperSU
do not wipe anything after this step
7.Reboot
1st reboot will take some time (10-20 min ). Do not interrupt this process.
PS: I totally recommend Sultan's LineageOS over official LOS. You can actually feel the difference in smoothness and performance. Especially the Camera.
Feel free to check device specific forum for OnePlus One
Happy flashing!
@psxda97.
Thanks for the quick reply.
OK, I'm going to start from scratch as you requested.
When I try to download SuperSu (from your link above) located in Google Play, I get “supersu already installed for your device”.
Did not find SuperSu in Phone Apps settings.
Went into TWRP File Manager \ supersu folder. Deleted all (4) entries.
Rebooted.
Went back into TWRP. The 4 entries reappear.
Google Play continues to gray out my device name. SuperSu is already installed.
I do have a SuperSu zip file on my PC. I installed this on my last attempt. It appears to be the same as Google Play.
Here is the name:
“C:\Users\Tomx\Downloads\SR1-SuperSU-v2.82-SR1-20170608224931.zip\”
Should I go with this?
Tom.
tomx2x said:
@psxda97.
Thanks for the quick reply.
OK, I'm going to start from scratch as you requested.
When I try to download SuperSu (from your link above) located in Google Play, I get “supersu already installed for your device”.
Did not find SuperSu in Phone Apps settings.
Went into TWRP File Manager \ supersu folder. Deleted all (4) entries.
Rebooted.
Went back into TWRP. The 4 entries reappear.
Google Play continues to gray out my device name. SuperSu is already installed.
I do have a SuperSu zip file on my PC. I installed this on my last attempt. It appears to be the same as Google Play.
Here is the name:
“C:\Users\Tomx\Downloads\SR1-SuperSU-v2.82-SR1-20170608224931.zip\”
Should I go with this?
Tom.
Click to expand...
Click to collapse
Yes. Copy all 3 zip (rom,gapps,supersu) to you phone.
Let me know how it goes..
@psxda97
Ok, I followed your steps 1-7.
Instructions completed successfully.
After setting up LineageOS and my Google acct I downloaded Titanium Backup.
Clicked on the app and received same error message stated in my previous post.
Is there another option/app to check if my phone is rooted?
I notice when I logoff from TWRP, I get this message displayed “Your device does not appear to be rooted Install SuperSU now This will root your device?“ There is a button to Install.
XDA put out a notice this is a bogus message and do not install.
“Sometimes, TWRP can’t detect that you already have SuperSU, so it’ll ask to flash its built-in version. But it’s almost always best to flash the latest version of SuperSU yourself “
In TWRP file manager\supersu folder contains 4 files.
99SuperSuDaemon, install-recovery.sh, su, Superuser.apk.
Are these the Built in version of supersu?
If you have other suggestions, let me know – Thanks for your help.
Tom.
tomx2x said:
@psxda97
Ok, I followed your steps 1-7.
Instructions completed successfully.
After setting up LineageOS and my Google acct I downloaded Titanium Backup.
Clicked on the app and received same error message stated in my previous post.
Is there another option/app to check if my phone is rooted?
I notice when I logoff from TWRP, I get this message displayed “Your device does not appear to be rooted Install SuperSU now This will root your device?“ There is a button to Install.
XDA put out a notice this is a bogus message and do not install.
“Sometimes, TWRP can’t detect that you already have SuperSU, so it’ll ask to flash its built-in version. But it’s almost always best to flash the latest version of SuperSU yourself “
In TWRP file manager\supersu folder contains 4 files.
99SuperSuDaemon, install-recovery.sh, su, Superuser.apk.
Are these the Built in version of supersu?
If you have other suggestions, let me know – Thanks for your help.
Tom.
Click to expand...
Click to collapse
Can you send me a screenshot of supersu app?
I'm using the exact settings and I don't have any problem at all.
Do not let TWRP install supersu.
@psxda97
As you know the Supersu is a zip file. When I open/ then extract, the display will show folders & their contents.
I have attached all the folders & contents from supersu extract for your review.
To get a screenshot maybe you can walk me through this step.
The only way I can think of is to find & download the SuperSu apk file (for this version) onto my phone and open it to get a visual screenshot of the app.
Here is the website link where I downloaded SuperSu 2 days ago.
" https://download.chainfire.eu/1114/...r&utm_medium=referral&utm_source=DonanimHaber “
tomx2x said:
To get a screenshot maybe you can walk me through this step.
The only way I can think of is to find & download the SuperSu apk file (for this version) onto my phone and open it to get a visual screenshot of the app.
Click to expand...
Click to collapse
I meant this
Edit : So you've no supersu app on you phone?
@psxda97
Maybe that's my problem. I do not have supersu on my phone application. (see my attached).
Here' what I do.
1. Download supersu zip file from website to my PC.
2. Connect PC to phone.
3. I do not extract the supersu.zip on my PC, I just manually copy the supersu.zip (as is) to Download folder (A0001) of my Phone.
4. Logoff off phone.
5. Get into TWRP. Click Install. Click supersu zip.
6. Reboot, when finish, run Titanium Backup on phone to check for root.
Should supersu app be on my phone after installation/rebooting?
Somehow it's not doing the root, even though it completes successfully in TWRP. Strange.
Tom.
tomx2x said:
[MENTION=7046372]
Should supersu app be on my phone after installation/rebooting?
Tom.
Click to expand...
Click to collapse
Yes.
Go to recover and flash it one more time
Then go to Advanced on twrp and select copy log (without kernel log).
Log will be on root folder of internal. attach the log in your next post
Also send me the screenshot of your about phone settings.
You're still missing something.
tomx2x said:
@psxda97
Maybe that's my problem. I do not have supersu on my phone application. (see my attached).
Here' what I do.
1. Download supersu zip file from website to my PC.
2. Connect PC to phone.
3. I do not extract the supersu.zip on my PC, I just manually copy the supersu.zip (as is) to Download folder (A0001) of my Phone.
4. Logoff off phone.
5. Get into TWRP. Click Install. Click supersu zip.
6. Reboot, when finish, run Titanium Backup on phone to check for root.
Should supersu app be on my phone after installation/rebooting?
Somehow it's not doing the root, even though it completes successfully in TWRP. Strange.
Tom.
Click to expand...
Click to collapse
Go to system settings>developer options>root access and set it to "apps and adb"
If you flash the SuperSU.zip in TWRP on your device then you should have root.
I think you misunderstood from the beginning, did you download the SuperSU.zip and then extract it on PC and then try to install it? If so, that was completely the wrong thing to do. You might have to remove what you've done so far and then try again from a clean start, you might gave to flash your stock firmware to get a clean start.
Have you looked into whether you need normal SuperSU or whether you need systemless SuperSU?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Additional info provided - Anyone with advice.
@psxda97 - No problem about your availability time will put my post in advance reply for others to share their advice. I'm currently in Thailand for awhile, so your PM time is my AM.
@Droidriven.
No I never did an extract of the Supersu zip file. I just raised that as a "Should I".
I have attached screenshots of my About Phone & Developer Options for review.
I found only 1 Recovery log file at the Root. This has been attached.
Normal Supersu or Seamless. Not an expert on this, but the article (see below), implies if you flash supersu it will decide what method to use. I'd prefer seamless if this help. "https://www.howtogeek.com/249162/what-is-systemless-root-on-android-and-why-is-it-better/"
Just curious. What if I ran in this order Supersu, ROM, GAAP.
Would that make any difference?
Tom.
tomx2x said:
@psxda97 - No problem about your availability time will put my post in advance reply for others to share their advice. I'm currently in Thailand for awhile, so your PM time is my AM.
@Droidriven.
No I never did an extract of the Supersu zip file. I just raised that as a "Should I".
I have attached screenshots of my About Phone & Developer Options for review.
I found only 1 Recovery log file at the Root. This has been attached.
Normal Supersu or Seamless. Not an expert on this, but the article (see below), implies if you flash supersu it will decide what method to use. I'd prefer seamless if this help. "https://www.howtogeek.com/249162/what-is-systemless-root-on-android-and-why-is-it-better/"
Just curious. What if I ran in this order Supersu, ROM, GAAP.
Would that make any difference?
Tom.
Click to expand...
Click to collapse
The problem might be in the LineageOS ROM that you're using, I've seen others have this issue on other devices using LineageOS.
I don't recall what some of the solutions were.
@Sam Nakamura is pretty knowledgeable about the OnePlus devices, maybe he has some useful input.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
tomx2x said:
@psxda97 - No problem about your availability time will put my post in advance reply for others to share their advice. I'm currently in Thailand for awhile, so your PM time is my AM.
@Droidriven.
No I never did an extract of the Supersu zip file. I just raised that as a "Should I".
I have attached screenshots of my About Phone & Developer Options for review.
I found only 1 Recovery log file at the Root. This has been attached.
Normal Supersu or Seamless. Not an expert on this, but the article (see below), implies if you flash supersu it will decide what method to use. I'd prefer seamless if this help. "https://www.howtogeek.com/249162/what-is-systemless-root-on-android-and-why-is-it-better/"
Just curious. What if I ran in this order Supersu, ROM, GAAP.
Would that make any difference?
Tom.
Click to expand...
Click to collapse
Sorry, it's early in the morning here and I think I haven't been able to get the question yet...
First of all, lineageOS provides a own method of root, found here:
https://download.lineageos.org/extras
If you instead choose to use supersu the order must be -> rom, (custom kernel), supersu, (or rom, custom kernel, gapps, supersu but for gapps it doesn't matter when to flash them as long as it is in the same session and after the rom, supersu intendes to either patch the kernel (hence systemless) or to write in system (partition of the rom), that's why rom and custom kernel (if you choose to use a custom kernel) needs to be flashed before supersu...
The supersu systemless / system detection does not always work properly, in that case you can force supersu systemlessly by going to the terminal option in twrp before flashing supersu and type this:
"echo SYSTEMLESS=true>>/data/.supersu" no quotes, type "false" instead of "true" in this line to force system mode...
If that doesn't solve your problems please elaborate on this again..
Sent from my OnePlus 2 using XDA Labs
Sam Nakamura said:
Sorry, it's early in the morning here and I think I haven't been able to get the question yet...
First of all, lineageOS provides a own method of root, found here:
https://download.lineageos.org/extras
If you instead choose to use supersu the order must be -> rom, (custom kernel), supersu, (or rom, custom kernel, gapps, supersu but for gapps it doesn't matter when to flash them as long as it is in the same session and after the rom, supersu intendes to either patch the kernel (hence systemless) or to write in system (partition of the rom), that's why rom and custom kernel (if you choose to use a custom kernel) needs to be flashed before supersu...
The supersu systemless / system detection does not always work properly, in that case you can force supersu systemlessly by going to the terminal option in twrp before flashing supersu and type this:
"echo SYSTEMLESS=true>>/data/.supersu" no quotes, type "false" instead of "true" in this line to force system mode...
If that doesn't solve your problems please elaborate on this again..
Sent from my OnePlus 2 using XDA Labs
Click to expand...
Click to collapse
I haven't used LineageOS yet so I'm not familiar with its details, I was pretty sure you'd know though. [emoji106]
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
@Sam Nakamura.
Thanks for the info.
I have previously executed the steps in the order you posted. I was just asking if other sequences to flash these apps were plausible.
With the help of member psxda97, he documented similar steps 1-7 for me. (Please read Post #4 on this thread and my results in Post #7). It's basically a snapshot of what you posted regarding the order seq.
Unfortunately, my phone still did not root after applying the ROM, GAAP & Supersu in this order. I'm not sure why the root is declared successful in TWRP, and the phone remain un-rooted.
Do you suggest I rerun steps1-7 from Post#4 and include your echo statement before installing supersu?
The LineageOS extras, (you mentioned) has a built-in root.
I now have LineagOS from Sultanxda's installed on my phone. It is highly recommended by XDA members over the official LOS, for it's smoothness and camera enhancements. Sultanxda' release is 06/25/2017.
LOS extras has a release date of 06/21/2017. My only issues, whether to choose LOS extras. I will subsequently get the next “Official” LOS release for 6/25 and loose LOS Sultanxda installation.
Tom.
Tried Installing LOS extras 14.1
@Sam Nakamura
I downloaded LOS extras from the link you provided.
Went into TWRP
Did the Install
Then rebooted.
Went back to phone\Developers Option
Root Access is still grayed out.
See screenshot attached.
Any suggestions?
Should I just do a TWRP factory reset and start over?
Tom.
tomx2x said:
@Sam Nakamura
I downloaded LOS extras from the link you provided.
Went into TWRP
Did the Install
Then rebooted.
Went back to phone\Developers Option
Root Access is still grayed out.
See screenshot attached.
Any suggestions?
Should I just do a TWRP factory reset and start over?
Tom.
Click to expand...
Click to collapse
Did you choose the correct arm(32) version of lineageOS su? I'd try the following:
Backup all partitions with twrp so you can return to your set-up later on..
Wipe everything except internal storage
Flash rom, (custom kernel), gapps and su
Boot up and check if it's working now
If not restore your backup and check next point
Alternatively:
Have you tried superSU with forced systemless via twrp terminal (by the way, if done correctly there shouldn't fallow a output with this command line..)
Flash supersu from here:
https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
I never had issues with the beta but you can also use the stable version, downloads on post 1
Using Magisk as root and root management tool
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Flashable zip via twrp, if successful go to magisk settings, and check superuser and read the rest of Magisk's potential on the linked thread, my preferred method as it allows you to hide root from certain apps which deny service to rooted devices..
Important, it's not a good idea to flash lineageOS su, then supersu, then magisk after each fails, at least restore your clean boot partition from twrp or flash the boot.img from within your rom zip... Best would be clean of course - but as you have a backup of your previous system you can play around and make errors...
Sent from my OnePlus 2 using XDA Labs