Before anything please note to disable Driver Signature Verifications in Windows (Google how to disable them in whatever version of windows you are using).
Then download Universal Naked Drivers
from--
http://www.xda-developers.com/universal-naked-driver-solves-your-adb-driver-problems-on-windows/
NOW THE PLAY BEGINS.....
Step 1. Enable the USB debugging on your phone. Go to Settings > About Phone > Scroll down and tap build number 7 times until you will see a popup stating ‘You are now a developer.
Step 2. Now go back and you will see the Developer option on the settings just above About Phone. Open it and enable it and turn on Advanced Reboot option, Now scroll down and turn off Update Cyanogen recovery.
Step 3. Now install the ADB and Fastboot file on your windows desktop from [here ](http://forum.xda-developers.com/showthread.php?t=2588979)and the setup will create a ADB folder on your C Drive (C:\adb)
Step 4. Connect your phone with PC/Laptop.
Step 5. Press and Hold Power button, then select and hold Reboot. You will get four options. Select the one stating Fastboot Mode.
In the Device Manager locate your Android device. Then right-click on it and select "Update Driver Software".
Select "Browse my computer for driver software".
Select "Let me pick from a list of device drivers on my computer".
Select "Show All Devices".
Press the "Have Disk" button.
Enter the path to the Google USB driver. (path where you have extracted universal naked drivers)
Select "Android bootloader Interface" from the list of device types.
Confirm the installation of the driver by pressing "Yes".
Confirm the installation again by pressing "Install".
When the installation is done, press "Close".
50 % done :good:
**NOW BEGINS THE ROOTING**
Now open the ADB folder on your desktop the same folder that you created in Step 3. In the folder press the Shift key on your keyboard, right click in the folder in blank area and select Open Command Prompt Here.
Now run the following command to confirm if your YUphoria is detected by PC in Fastboot Mode or not:
fastboot -i 0x2A96 oem devices
Now Run the following command to unlock bootloader:-
fastboot -i 0x2A96 oem unlock
After that to reboot the phone run the following command:-
fastboot -i 0x2A96 reboot
Now the bootloader is unlocked and next step is to install TWRP and root the phone.
INSTALL TWRP AND ROOT YU YUPHORIA
Download the TWRP file for the phone here(https://app.box.com/s/3e5ofvi9xtbadbysrp3ytkshl45k3shb) and paste the same on the ADB folder on your C drive.
Download the SuperSU zip file here(http://forum.xda-developers.com/showthread.php?t=1538053) and save on your phone internal SD card.
Press and Hold Power button, then select and hold Reboot. You will get four options. Select the one stating Fastboot Mode.
Now again open the ADB folder and press the Shift key on your keyboard, right click in the folder in blank area and select Open Command Prompt Here.
Step 7. Now run the following command on your phone to install TWRP:-
fastboot -i 0x2A96 flash recovery twrp.img
Step 8. Once flashed phone will restart and boot it into Recovery mode. Press Volume Up+Volume Down+Power button altogether. YUphoria will boot into recovery mode TWRP which was flashed by you.
Step 9. Once you are on recovery mode. Select Install zip >> Choose zip from /sdcard >> 0/ >> Select Supersu.zip >> Yes – Install Supersu.zip
Step 10. Go Back and Select Wipe Cache Partition >> Yes Wipe. >> It will take 2-3 minutes to wipe.
Step 11. After this select advanced and select Wipe Dalvik Cache >> Yes Wipe.
Step 12. And now select Reboot System Now >> Yes.
Now your phone will reboot and first boot will take some time, So, Be patient. Now, you phone is rooted. Enjoy.
Problem solved
Many people were having problems in the detection of device...i have solved it
Can anyone upload TWRP in Drive or any other place? The box link is all over the internet and is not working as it is out of bandwidth (sucks!). TIA FYI: The box link download button translates to this link
So since no one here seems to have the time or courtesy to provide the link, for the ones who needs it. Here it is.
Thanku soon much bro....just got my YU..will try it later
---------- Post added at 11:55 AM ---------- Previous post was at 11:53 AM ----------
Just one question.... Can stock recovery install superuser?
http://forums.yuplaygod.com/#yuphoria.34
Actually why don't you'll try out the forums on YUPLAYGOD....
They have ALL THE POSSIBLE LINKS THERE and everything is functioning properly including links to TWRP and the rooting etc etc...
And it is better to have TWRP installed to flash SUPERSU..
Cheers
Greg
great thanks you for sharing this method, definately i will try :good:
Great work ?
there is no option for new yuphria
Sent from my YU5010A using Tapatalk
i have a yuphoria which has stock android and i want to instal cm12.1 . When i tried to unlock oem it didnt wipe data
and im not able to boot or flash twrp
Pls help guys
RoyalBhati said:
Before anything please note to disable Driver Signature Verifications in Windows (Google how to disable them in whatever version of windows you are using).
Then download Universal Naked Drivers
from--
http://www.xda-developers.com/universal-naked-driver-solves-your-adb-driver-problems-on-windows/
NOW THE PLAY BEGINS.....
Step 1. Enable the USB debugging on your phone. Go to Settings > About Phone > Scroll down and tap build number 7 times until you will see a popup stating ‘You are now a developer.
Step 2. Now go back and you will see the Developer option on the settings just above About Phone. Open it and enable it and turn on Advanced Reboot option, Now scroll down and turn off Update Cyanogen recovery.
Step 3. Now install the ADB and Fastboot file on your windows desktop from [here ](http://forum.xda-developers.com/showthread.php?t=2588979)and the setup will create a ADB folder on your C Drive (C:\adb)
Step 4. Connect your phone with PC/Laptop.
Step 5. Press and Hold Power button, then select and hold Reboot. You will get four options. Select the one stating Fastboot Mode.
In the Device Manager locate your Android device. Then right-click on it and select "Update Driver Software".
Select "Browse my computer for driver software".
Select "Let me pick from a list of device drivers on my computer".
Select "Show All Devices".
Press the "Have Disk" button.
Enter the path to the Google USB driver. (path where you have extracted universal naked drivers)
Select "Android bootloader Interface" from the list of device types.
Confirm the installation of the driver by pressing "Yes".
Confirm the installation again by pressing "Install".
When the installation is done, press "Close".
50 % done :good:
**NOW BEGINS THE ROOTING**
Now open the ADB folder on your desktop the same folder that you created in Step 3. In the folder press the Shift key on your keyboard, right click in the folder in blank area and select Open Command Prompt Here.
Now run the following command to confirm if your YUphoria is detected by PC in Fastboot Mode or not:
fastboot -i 0x2A96 oem devices
Now Run the following command to unlock bootloader:-
fastboot -i 0x2A96 oem unlock
After that to reboot the phone run the following command:-
fastboot -i 0x2A96 reboot
Now the bootloader is unlocked and next step is to install TWRP and root the phone.
INSTALL TWRP AND ROOT YU YUPHORIA
Download the TWRP file for the phone here(https://app.box.com/s/3e5ofvi9xtbadbysrp3ytkshl45k3shb) and paste the same on the ADB folder on your C drive.
Download the SuperSU zip file here(http://forum.xda-developers.com/showthread.php?t=1538053) and save on your phone internal SD card.
Press and Hold Power button, then select and hold Reboot. You will get four options. Select the one stating Fastboot Mode.
Now again open the ADB folder and press the Shift key on your keyboard, right click in the folder in blank area and select Open Command Prompt Here.
Step 7. Now run the following command on your phone to install TWRP:-
fastboot -i 0x2A96 flash recovery twrp.img
Step 8. Once flashed phone will restart and boot it into Recovery mode. Press Volume Up+Volume Down+Power button altogether. YUphoria will boot into recovery mode TWRP which was flashed by you.
Step 9. Once you are on recovery mode. Select Install zip >> Choose zip from /sdcard >> 0/ >> Select Supersu.zip >> Yes – Install Supersu.zip
Step 10. Go Back and Select Wipe Cache Partition >> Yes Wipe. >> It will take 2-3 minutes to wipe.
Step 11. After this select advanced and select Wipe Dalvik Cache >> Yes Wipe.
Step 12. And now select Reboot System Now >> Yes.
Now your phone will reboot and first boot will take some time, So, Be patient. Now, you phone is rooted. Enjoy.
Click to expand...
Click to collapse
Can I flash the SU zip using adb?
Hi where can I find twrp for YU5010a ?
PS :- Is there any guide to root Yu010a ?
Root YU andriod 5.1.1
RoyalBhati said:
Many people were having problems in the detection of device...i have solved it
Click to expand...
Click to collapse
i have the problem to detect it
hi thanks for the post now i can root my yuphoria mobile thank you
guys i tried this method before coming to this website i did everything including unlocking bootloader but i could not launch twrp thingy on my phone ......any other method
that yu forums website is also same way
When i am input the command in the pc then he reply waiting for devices,
How to solve this problum??
Is there any way to root without unlock boot loader?
New Yuphoria 5010A with android no cyanogen , HELP
Hi
I have pruchased new Yuphoria 5010A with android os no cyanogen. I have tried all the methods to unlock oem and bootloader. I enabled allow oem unlock from developer options followed by using fastboot oem unlock method . ( fastboot does detect the device using fastboot devices" . but I get an error "remote em unlock not allowed" . Is there any fix for this. I would be grateful if you can help me .
Thank you
can't unlock the bootloader of yu5010a please help
I have followed the steps but its showing oem unlocking not allowed please help me
Temperory recovery
Sir can I temporarily boot into a custom recovery like twrp ...
And still have the stock recovery intact like hotboot .....
Someone told me doing hotboot saves ur ota updates ....
I have done this once and unlocked my bootloader and having stock recovery too.....
Twrp vanishes on reboot ....
Can this temporary recovery methods is good and can i use this same method to install xposed and make nandroid backup...
Thank you sir regards
Hi there!!
Well I was trying to root this phone since a month but due to lack of developers, it wasn't possible. So I tried and at last succeeded in rooting and porting TWRP recovery for Intex Aqua Music.
I tried to elaborate every step as much as I can so the tutorial becomes user friendly for everyone.
Disclaimer: Rooting immediately voids your phone's warranty, you should consider very carefully whether you need to gain root privileges. And this tutorial will format your phone. So backup you important files at the very first.
Tutorial
First download all the files which i left and the end of the thread and proceed with the tutorial.
First of all you need to install ADB Drivers.
Once drivers are installed, you need to enable USB Debugging in your phone.
(goto phone settings->About phone->scroll down and you’ll see an entry labelled ‘Build number.’ Keep on tapping till you see a prompt that says ‘You are now a developer)
Now in phone settings you will see a new option called Developer Options.
Now goto Developer Options and enable OEM Unlocking(for unlocking the bootloader so you can flash the TWRP recovery) and USB Debugging.
Now connect you phone with usb cable to computer and open the adb and fastboot folder which you downloaded.
Then open command prompt there(shift+right click) and type:
Code:
adb devices
You will see a popup on you phone screen, Select allow and ok
Now you will see your device listed there in command prompt.
Now type the following commands:
Code:
adb reboot bootloader
Phone will switch off and go into bootloader. Then type
Code:
fastboot oem unlock
Now you phone will ask for confirmation. Use Volume UP Button to select yes then type
Code:
fastboot continue
.
Now your device will reboot(it will take some time so don't worry)
Now once your phone boot up you will see its formatted and bootloader will be unlocked.
Now again goto setting and enable USB Debugging like before and connect you phone with pc.
Now copy the recovery.img from recovery zip which you downloaded to adb and fastboot folder.
Then in adb command prompt type the following commands like before
Code:
adb reboot bootloader
Wait for the phone to go into bootloader mode, then
Code:
fastboot flash recovery recovery.img
fastboot continue
Now twrp is flashed in your phone. Now to root your device copy the supersu zip to you phone.
Switch off your mobile, then press Volume Up + Power button together then choose recovery mode with Volume UP Button and
press Volume Down Button.
Now phone will boot into TWRP recovery mode.
Click Install and choose the Super Su zip from file manager then install it.
The click reboot and once your phone boots up its rooted now.
Enjoy!
Thanks button will be appreciated if the tutorial works for you.
Thanks
Thanks man, helpful
How to unlock bootloader & get root for Lenovo K8 Plus
**********Pre-requirements***********
1. Make sure you have 70% charge or more then that.
2. Follow all steps correctly otherwise you will end up with a bricked phone.
3. I'm not responsible for any damage to your phone.
4. Make sure that you have installed usb drivers.
5. Download ADB & Fastboot Drivers
Steps to Unlock Bootloader
1. First of all, enable the Developer Option
To Enable the Developer Option, Go to your Settings -> About -> Software Information -> More -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled"
2. Go back to settings -> Now you need to enable the OEM Unlock by going to Settings -> Developer Option and Enable OEM Unlock and USB Debugging
3. Download and Extract the Downloaded ADB fastboot Zip file on your phone.
4. Now connect your phone to Computer using USB Cable.
When you connect your Phone to Computer, please wait until all the drivers get installed.
5. In your ADB fastboot folder open a command prompt window by pressing Shift Key + Right Mouse Click
Now type the command in your command window
Code:
adb devices
6. If you see a pop up to allow USB Debugging on your phone, Click OK
Now type the command below to reboot your phone to bootloader
Code:
adb reboot bootloader
7. Once your phone reboot into bootloader, make sure your phone shows the bootloader locked and then type the command below to make sure fastboot drivers are installed properly.
Code:
fastboot devices
8. This command will list the connected devices. If your phones serial number shows up you are good to go and may continue. If the phone is NOT listed this indicates that your drivers are not installed correctly. In order for you to continue, you must fix your drivers so that your phone is listed under fastboot devices.
9. If the phone has been recognized by the command above, proceed to unlock the bootloader with the following command:
Code:
Remember that this step will wipe EVERYTHING off the phone
Code:
fastboot oem unlock
10. After the above command has finished executing, run the following
Code:
fastboot reboot
The phone will reboot. Wait until the phone has fully booted up into Android.
Root method
Note:- All credits for it goes to @topjohnwu for his amazing magisk
Requirements:-
1. Make sure you are on latest September patch firmware.
2. Download patched_boot.img created from magisk mangaer.
Instructions:-
1. Connect up your phone then type:-
Code:
adb reboot bootloader
2. Copy patched_boot.img in adb folder.
Now type
Code:
fastboot flash boot patched_boot.img[/url]
3. Open up you device & install magisk manager from [url=https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445]here[/url]
Voilla you're rooted.
Mod Edit
Duplicate thread is closed
malybru
Senior Moderator
How to unlock bootloader & get root for Lenovo K8 Plus
**********Pre-requirements***********
1. Make sure you have 70% charge or more then that.
2. Follow all steps correctly otherwise you will end up with a bricked phone.
3. I'm not responsible for any damage to your phone.
4. Make sure that you have installed usb drivers.
5. Download ADB & Fastboot Drivers
Steps to Unlock Bootloader
1. First of all, enable the Developer Option
To Enable the Developer Option, Go to your Settings -> About -> Software Information -> More -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled"
2. Go back to settings -> Now you need to enable the OEM Unlock by going to Settings -> Developer Option and Enable OEM Unlock and USB Debugging
3. Download and Extract the Downloaded ADB fastboot Zip file on your phone.
4. Now connect your phone to Computer using USB Cable.
When you connect your Phone to Computer, please wait until all the drivers get installed.
5. In your ADB fastboot folder open a command prompt window by pressing Shift Key + Right Mouse Click
Now type the command in your command window
Code:
adb devices
6. If you see a pop up to allow USB Debugging on your phone, Click OK
Now type the command below to reboot your phone to bootloader
Code:
adb reboot bootloader
7. Once your phone reboot into bootloader, make sure your phone shows the bootloader locked and then type the command below to make sure fastboot drivers are installed properly.
Code:
fastboot devices
8. This command will list the connected devices. If your phones serial number shows up you are good to go and may continue. If the phone is NOT listed this indicates that your drivers are not installed correctly. In order for you to continue, you must fix your drivers so that your phone is listed under fastboot devices.
9. If the phone has been recognized by the command above, proceed to unlock the bootloader with the following command:
Code:
Remember that this step will wipe EVERYTHING off the phone
Code:
fastboot oem unlock
10. After the above command has finished executing, run the following
Code:
fastboot reboot
The phone will reboot. Wait until the phone has fully booted up into Android.
Root method
Note:- All credits for it goes to @topjohnwu for his amazing magisk
Requirements:-
1. Make sure you are on latest September patch firmware.
2. Download patched_boot.img created from magisk mangaer.
Instructions:-
1. Connect up your phone then type:-
Code:
adb reboot bootloader
2. Copy patched_boot.img in adb folder.
Now type
Code:
fastboot flash boot patched_boot.img[/url]
3. Open up you device & install magisk manager from [url=https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445]here[/url]
Voilla you're rooted.
Mod Edit
Duplicate thread is closed
malybru
Senior Moderator
How to unlock bootloader & get root for Lenovo K8 Plus
**********Pre-requirements***********
1. Make sure you have 70% charge or more then that.
2. Follow all steps correctly otherwise you will end up with a bricked phone.
3. I'm not responsible for any damage to your phone.
4. Make sure that you have installed usb drivers.
5. Download ADB & Fastboot Drivers
Steps to Unlock Bootloader
1. First of all, enable the Developer Option
To Enable the Developer Option, Go to your Settings -> About -> Software Information -> More -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled"
2. Go back to settings -> Now you need to enable the OEM Unlock by going to Settings -> Developer Option and Enable OEM Unlock and USB Debugging
3. Download and Extract the Downloaded ADB fastboot Zip file on your phone.
4. Now connect your phone to Computer using USB Cable.
When you connect your Phone to Computer, please wait until all the drivers get installed.
5. In your ADB fastboot folder open a command prompt window by pressing Shift Key + Right Mouse Click
Now type the command in your command window
Code:
adb devices
6. If you see a pop up to allow USB Debugging on your phone, Click OK
Now type the command below to reboot your phone to bootloader
Code:
adb reboot bootloader
7. Once your phone reboot into bootloader, make sure your phone shows the bootloader locked and then type the command below to make sure fastboot drivers are installed properly.
Code:
fastboot devices
8. This command will list the connected devices. If your phones serial number shows up you are good to go and may continue. If the phone is NOT listed this indicates that your drivers are not installed correctly. In order for you to continue, you must fix your drivers so that your phone is listed under fastboot devices.
9. If the phone has been recognized by the command above, proceed to unlock the bootloader with the following command:
Code:
Remember that this step will wipe EVERYTHING off the phone
Code:
fastboot oem unlock
10. After the above command has finished executing, run the following
Code:
fastboot reboot
The phone will reboot. Wait until the phone has fully booted up into Android.
Root method
Note:- All credits for it goes to @topjohnwu for his amazing magisk
Requirements:-
1. Make sure you are on latest September patch firmware.
2. Download patched_boot.img created from magisk mangaer.
Instructions:-
1. Connect up your phone then type:-
Code:
adb reboot bootloader
2. Copy patched_boot.img in adb folder.
Now type
Code:
fastboot flash boot patched_boot.img[/url]
3. Open up you device & install magisk manager from [url=https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445]here[/url]
Voilla you're rooted.
twrp please for lenovo k8 +++++
Mod Edit
Duplicate thread is closed
malybru
Senior Moderator