Related
[Q&A] [ROM] InsertCoin 3.0.6 for DLXUB1 | Android 4.4.2 | HTC Sense 6 | | IC PerApp
Q&A for [ROM] InsertCoin 3.0.6 for DLXUB1 | Android 4.4.2 | HTC Sense 6 | | IC PerApp Theme
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] InsertCoin 3.0.6 for DLXUB1 | Android 4.4.2 | HTC Sense 6 | | IC PerApp Theme. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Stuck on Boot screen while trying to flash [ROM] InsertCoin 3.0.6 for DLXUB1 | Androi
Hi,
I tried to flash the [ROM] InsertCoin 3.0.6 for DLXUB1 | Android 4.4.2 | HTC Sense 6 | | IC PerApp Theme and got stuck on the boot screen.
I have TWRP 2.5 installed, Hboot 1.41.0000 and bootloader unlocked.
I simply went into recovery and installed the zip file.
Please help. It is much needed and appreciated.
Capt Vikram Sandhu said:
Hi,
I tried to flash the [ROM] InsertCoin 3.0.6 for DLXUB1 | Android 4.4.2 | HTC Sense 6 | | IC PerApp Theme and got stuck on the boot screen.
I have TWRP 2.5 installed, Hboot 1.41.0000 and bootloader unlocked.
I simply went into recovery and installed the zip file.
Please help. It is much needed and appreciated.
Click to expand...
Click to collapse
Might be because you did not use this TWRP Made by Kairi.
Thanks a ton sir. The room had been flashed and I'm living it.?
Sent from my HTC Butterfly using XDA Free mobile app
Hi,
How to S-Off my devices now. Its HTC x920d, CID: HTC_038, Rooted and other info as attached thumbnails.
Your advice is needed and much appreciated.
Capt Vikram Sandhu said:
Hi,
How to S-Off my devices now. Its HTC x920d, CID: HTC_038, Rooted and other info as attached thumbnails.
Your advice is needed and much appreciated.
Click to expand...
Click to collapse
I personally used Rumrunner to do my S-OFF. Perhaps did you enable usb debugging in developer options?
xunus said:
I personally used Rumrunner to do my S-OFF. Perhaps did you enable usb debugging in developer options?
Click to expand...
Click to collapse
Dear Xunus,
Yes I had the debugging mode on and fastboot off in the dev. options & power settings respectively. Also I don't have HTC Sync. Set up my ASUS ROG G750JMhttp://www.asus.com/in/Notebooks_Ultrabooks/ASUS_ROG_G750JM/according to this guide - http://forum.xda-developers.com/showthread.php?t=2256359 for device recognition in adb/fastboot mode after completly setting up JDK (& enviorment fully with path setting in system enviornment) and Android SDK as per this link - http://developer.android.com/sdk/index.html
But I'm in a thicker soup now. (in between my query and your reply).
Actually this device was initially my first x920d HTC_038.
On this intial device I was S-on, unlocked, maybe rooted or rooted then unrooted ( bootloader displayed *** TAMPERED *** ***UNLOCKED*** ,S-On, Hboot 1.41.00 - if required i can post the image) & definitely had a custom rom installed on it & TWRP 2.5 (don't remember which custom rom {somewhere around Android JB initial versions & subsequently upgraded to JB 4.2, but was not able to update to 4.3});
Last week I came across InsertCoin Kitkat Roms and tried to upgrade by flashing TWRP 2.8 & then flashing the zip through recovery TWRP 2.8 and got stuck at boot screen. You were kind enough to help me out - http://forum.xda-developers.com/showpost.php?p=56987280&postcount=3
Then I flashed Kairi's Twrp and flashed Insert Coin 3.0.6. Then rooted by flashing 'UPDATE-SuperSU-v2.02.zip'. My device info after this was as - http://forum.xda-developers.com/showpost.php?p=57107853&postcount=5
Then I tried to s-off through rumrunner 0.5.xx following this guide - http://rumrunner.us/instructions/ but it never finished - (attached image). Then I relocked the bootloader by fastboot oem lock command in fastboot mode. It did relock my bootloader, then i retried rumrunner through fastboot, but it came up with this - 'attached image 1'. Nnow I'm stuck with relocked bootloader, rooted device running insert coin 3.0.6, cannot boot into recovery, cannot flash PL99IMG.img/TWRP 2.7 Kairi (attached images). But my fastboot/adb is fully up and the IC rom is running good.
Kindly try to help me if you get some time.
Also I want to contribute (though am not able to contribute financially at the moment) to our forum , but sure can commit/devote minimum 6 to 10 hours a week for any job the forum/members' want or can be understudee to any member. Just bear in mind that I'm a noobie
I hope+wish to contribute+learn simultaneously to+from our forum.
Thanks.
:good:
Capt Vikram Sandhu said:
Dear Xunus,
Yes I had the debugging mode on and fastboot off in the dev. options & power settings respectively. Also I don't have HTC Sync. Set up my ASUS ROG G750JMhttp://www.asus.com/in/Notebooks_Ultrabooks/ASUS_ROG_G750JM/according to this guide - http://forum.xda-developers.com/showthread.php?t=2256359 for device recognition in adb/fastboot mode after completly setting up JDK (& enviorment fully with path setting in system enviornment) and Android SDK as per this link - http://developer.android.com/sdk/index.html
But I'm in a thicker soup now. (in between my query and your reply).
Actually this device was initially my first x920d HTC_038.
On this intial device I was S-on, unlocked, maybe rooted or rooted then unrooted ( bootloader displayed *** TAMPERED *** ***UNLOCKED*** ,S-On, Hboot 1.41.00 - if required i can post the image) & definitely had a custom rom installed on it & TWRP 2.5 (don't remember which custom rom {somewhere around Android JB initial versions & subsequently upgraded to JB 4.2, but was not able to update to 4.3});
Last week I came across InsertCoin Kitkat Roms and tried to upgrade by flashing TWRP 2.8 & then flashing the zip through recovery TWRP 2.8 and got stuck at boot screen. You were kind enough to help me out - http://forum.xda-developers.com/showpost.php?p=56987280&postcount=3
Then I flashed Kairi's Twrp and flashed Insert Coin 3.0.6. Then rooted by flashing 'UPDATE-SuperSU-v2.02.zip'. My device info after this was as - http://forum.xda-developers.com/showpost.php?p=57107853&postcount=5
Then I tried to s-off through rumrunner 0.5.xx following this guide - http://rumrunner.us/instructions/ but it never finished -http://dl-1.va.us.xda-developers.com/3/0/3/7/9/2/7/Rumrunner_Error.png?key=vEm3NkbgFBSwUpCE1I-SYQ&ts=1417206844 . Then I relocked the bootloader by fastboot oem lock command in fastboot mode. It did relock my bootloader, then i retried rumrunner through fastboot, but it came up with this - 'attached image 1'. Nnow I'm stuck with relocked bootloader, rooted device running insert coin 3.0.6, cannot boot into recovery, cannot flash PL99IMG.img/TWRP 2.7 Kairi (attached images). But my fastboot/adb is fully up and the IC rom is running good.
Kindly try to help me if you get some time.
Also I want to contribute (though am not able to contribute financially at the moment) to our forum , but sure can commit/devote minimum 6 to 10 hours a week for any job the forum/members' want or can be understudee to any member. Just bear in mind that I'm a noobie
I hope+wish to contribute+learn simultaneously to+from our forum.
Thanks.
:good:
Click to expand...
Click to collapse
I'm not really a pro on this stuff, just sharing my experience on the Butterfly. Since your current situation is a Relocked bootloader and unfortunately its still S-ON. The only thing you could do was to unlocked your bootloader again via every possible ways. I did see you tried to unlock with the 1st unlock_code.bin. But it gave you error. How about getting a new Unlock_code from HTC? Hopefully it will work this round. Without a unlocked bootloader there's pretty much nothing else you could do.( Caution: unlocking your bootloader again will wipe your data. Recommended to backup your stuffs if you need them)
If you are able to unlock your bootloader, things to do and try out.
1st: Flash Kairi's 270X twrp
2nd: Flash Kairi's reset kernel (Because its a unsecured stock kernel)
3rd: Turn on usb debug, HTC fast boot turn off
4th: Try rumrunner again.
The real developers for x920d left here in xda would be kairi_zeroblade and xXminiWHOOPERxX. Its only them that can make a change to the X920D xda community.
xunus said:
I'm not really a pro on this stuff, just sharing my experience on the Butterfly. Since your current situation is a Relocked bootloader and unfortunately its still S-ON. The only thing you could do was to unlocked your bootloader again via every possible ways. I did see you tried to unlock with the 1st unlock_code.bin. But it gave you error. How about getting a new Unlock_code from HTC? Hopefully it will work this round. Without a unlocked bootloader there's pretty much nothing else you could do.( Caution: unlocking your bootloader again will wipe your data. Recommended to backup your stuffs if you need them)
If you are able to unlock your bootloader, things to do and try out.
1st: Flash Kairi's 270X twrp
2nd: Flash Kairi's reset kernel (Because its a unsecured stock kernel)
3rd: Turn on usb debug, HTC fast boot turn off
4th: Try rumrunner again.
The real developers for x920d left here in xda would be kairi_zeroblade and xXminiWHOOPERxX. Its only them that can make a change to the X920D xda community.
Click to expand...
Click to collapse
Voila
I have just unlocked again through flashing unlock token.
Actually if you see in the image in my previous post I had erronouslt typed "fastboot unlocktocken Unlock_code.bin". It should had been "fastboot unlocktoken Unlock_code.bin".
The device is setting up for the first time as I type.
Thanks XUNUS.
Now should I follow your the steps you mentioned or first of all change my CID HTC_038 to CID: 11111111 by "fastboot oem writecid 11111111" and then continue to your steps.
Also can you provide me the link to kairi's reset kernel?
I cannot do a "fastboot oem writecid 11111111" as I'm S-On.
meanwhile I've successfully flashed Kairi's TWRP and now am searching for his Reset Kernel.
Capt Vikram Sandhu said:
Voila
I have just unlocked again through flashing unlock token.
Actually if you see in the image in my previous post I had erronouslt typed "fastboot unlocktocken Unlock_code.bin". It should had been "fastboot unlocktoken Unlock_code.bin".
The device is setting up for the first time as I type.
Thanks XUNUS.
Now should I follow your the steps you mentioned or first of all change my CID HTC_038 to CID: 11111111 by "fastboot oem writecid 11111111" and then continue to your steps.
Also can you provide me the link to kairi's reset kernel?
I cannot do a "fastboot oem writecid 11111111" as I'm S-On.
meanwhile I've successfully flashed Kairi's TWRP and now am searching for his Reset Kernel.
Click to expand...
Click to collapse
Oh ya i forgot to add that in Here it is
xunus said:
Oh ya i forgot to add that in Here it is
Click to expand...
Click to collapse
Finally --- SUCCESS in S-Off thru rumrunner (attached thumbnail)
What I did was downgraded to [ROM]|8.15.2013|NOS M7 v3.0.0|(Sense 5.0 JB 4.2.2)Butterfly - http://forum.xda-developers.com/showthread.php?t=2193912
and ran rummrunner. VOILA.
Will definitely share the steps with you in my next post.
Thanks for all your support. I owe you, NOS, rumrunner, insertcoin and xda a big 'IOU'.
:good::good:
Capt Vikram Sandhu said:
Finally --- SUCCESS in S-Off thru rumrunner (attached thumbnail)
What I did was downgraded to [ROM]|8.15.2013|NOS M7 v3.0.0|(Sense 5.0 JB 4.2.2)Butterfly - http://forum.xda-developers.com/showthread.php?t=2193912
and ran rummrunner. VOILA.
Will definitely share the steps with you in my next post.
Thanks for all your support. I owe you, NOS, rumrunner, insertcoin and xda a big 'IOU'.
:good::good:
Click to expand...
Click to collapse
Haha enjoy! Don't forget to update your firmware to the latest from HTC official. (I supposed you have Super-CID)
xunus said:
Oh ya i forgot to add that in Here it is
Click to expand...
Click to collapse
Hi Xunus,
I was running InsertCoin 3.0.6 on my x920d HTC_038, unloocked (thru HTCDev), S-Off (thru rumrunner) and rooted by flashing 'UPDATE-SuperSU-v2.02' from recovery after flashing the ROM a couple of days earlier.
I had also flashed Kairi's firmware-kk (which is for HTC_061) as I had Super CID 11111111.
There was some problem with the htc backup/restore function, so I reflashed the rom acouple of times thru recovery(TWRP 2.7 by Kairi).
I happened to flash '[ROM] FireKatN4 Deodex V5 TW 4.4.4' from http://forum.xda-developers.com/note...emely-t2916463. Which did not flashed properly; so I re-flashed IC3.0.6 thru recovery and it showed successful at the end.
Now when I tried to reboot it got stuck in bootloop.
Since yesterday I have been trying various steps:
Unlocked the bootloader thru HTCDev once again.
Flashing the firmware-kk thru oemRUU after changing the CID to 11111111 in the adroid-info file of this zip. (it gave Remote90 error and after repeating fastboot flash zip firmware-kk.zip it flashed. Although in between it said "signature checking, verified fail - Bypassing and after that successful at the end. However on my device the green bar moved only to 90% and remained there.)
Rebooted into bootloader, tried flashing the same firmware with Error :
"C:\Fastboot>fastboot flash zip firmware-kk.zip
target reported max download size of 1514139648 bytes
sending 'zip' (19401 KB)...
OKAY [ 1.975s]
writing 'zip'...
FAILED (remote: not allowed)
finished. total time: 2.011s"
Although I'm able to flash recovery img thru fastboot.
My Getvar all read as :
C:\Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 3A.32.306.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.04.709.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxxxxxx
(bootloader) imei: xxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: deluxe_ub1
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PL9911000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4196mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-ae8bbb39
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Re flashed IC3.0.6 thru recover once again. when rebooting, get stuck in bootloop again.
PLEASE HELP
P.S. I have some pics also if required.
I am also S-Off, Relocked/Unlocked and not sure about root status.
Please Help
Here's what I repeated. Step - by -step
1. First of all got the getvar all details:
C:\Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 3A.32.306.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.04.709.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: ------------------
(bootloader) imei: -----------------------
(bootloader) meid: 00000000000000
(bootloader) product: deluxe_ub1
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PL9911000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4195mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-ae8bbb39
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.089s
QUERY : Should I be concerned regarding
i. (bootloader) platform: HBOOT-8064
ii. (bootloader) hbootpreupdate: 11, because in Kairi's firmware zip the android-info reads
1) CID H_061 (I changed it to 11111111)
2) hbootpreupdate:3 (This I did not change)
2. Relocked the boot loader (after checking if I could unlock it again through the previous code.bin. I did this successfully but without Selecting 'Yes' option at the end of the process on my device)
C:\Fastboot>fastboot oem lock
...
(bootloader) Lock successfully...
(bootloader) mipi display off
(bootloader) mipi_dsi_cmds_tx_ext
(bootloader) pm8921_vreg_disable function, vreg_id = 1
(bootloader) pm8921_vreg_disable function, vreg_id = 38
(bootloader) TZ_HTC_SVC_DISABLE ret = -2228225 (0xFFDDFFFF)
(bootloader) [HTC]PS_HOLD resets device!
FAILED (status read failed (Too many links))
finished. total time: 1.246s
C:\Fastboot>fastboot flash unlocktoken Unlock_code.bin
< waiting for device >
target reported max download size of 1514139648 bytes
sending 'unlocktoken' (0 KB)...
OKAY [ 0.136s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.009s]
finished. total time: 0.148s
NOTE: Both the times device booted into bootloop.
3. Flashing Kairi's firmware-kk.zip through RUU
a. Rebooted in RUU
C:\Fastboot>fastboot oem rebootRUU
...
(bootloader) Start Verify: 0
OKAY [ 0.053s]
finished. total time: 0.055s
b. Flashed firmware-kk (remember the file CID changed to 11111111
C:\Fastboot>fastboot flash zip firmware-kk.zip
target reported max download size of 1514139648 bytes
sending 'zip' (19401 KB)...
OKAY [ 2.007s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[hboot] unzipping for pre-update check...
(bootloader) start image[hboot] flushing...
(bootloader) [RUU]WP,hboot,0
(bootloader) [RUU]WP,hboot,99
(bootloader) [RUU]WP,hboot,100
(bootloader) ...... Successful
FAILED (remote: 90 hboot pre-update! please flush image again immediately)
finished. total time: 3.490s
C:\Fastboot>
C:\Fastboot>fastboot flash zip firmware-kk.zip
target reported max download size of 1514139648 bytes
sending 'zip' (19401 KB)...
OKAY [ 2.016s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[sbl1-1] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-1,0
(bootloader) [RUU]UZ,sbl1-1,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-2] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-2,0
(bootloader) [RUU]UZ,sbl1-2,100
(bootloader) signature checking...
(bootloader) [RUU]WP,sbl1-2,0
(bootloader) [RUU]WP,sbl1-2,100
(bootloader) ...... Successful
(bootloader) start image[sbl2] unzipping & flushing...
(bootloader) [RUU]UZ,sbl2,0
(bootloader) [RUU]UZ,sbl2,100
(bootloader) [RUU]WP,sbl2,0
(bootloader) [RUU]WP,sbl2,100
(bootloader) ...... Successful
(bootloader) start image[sbl3] unzipping & flushing...
(bootloader) [RUU]UZ,sbl3,0
(bootloader) [RUU]UZ,sbl3,100
(bootloader) [RUU]WP,sbl3,0
(bootloader) [RUU]WP,sbl3,100
(bootloader) ...... Successful
(bootloader) start image[radio] unzipping & flushing...
(bootloader) [RUU]UZ,radio,0
(bootloader) [RUU]UZ,radio,8
(bootloader) [RUU]UZ,radio,13
(bootloader) [RUU]UZ,radio,22
(bootloader) [RUU]UZ,radio,31
(bootloader) [RUU]UZ,radio,40
(bootloader) [RUU]UZ,radio,49
(bootloader) [RUU]UZ,radio,58
(bootloader) [RUU]UZ,radio,67
(bootloader) [RUU]UZ,radio,75
(bootloader) [RUU]UZ,radio,80
(bootloader) [RUU]UZ,radio,89
(bootloader) [RUU]UZ,radio,99
(bootloader) [RUU]UZ,radio,100
(bootloader) [RUU]WP,radio,0
(bootloader) [RUU]WP,radio,35
(bootloader) [RUU]WP,radio,71
(bootloader) [RUU]WP,radio,100
(bootloader) ...... Successful
(bootloader) start image[rcdata] unzipping & flushing...
(bootloader) [RUU]UZ,rcdata,0
(bootloader) [RUU]UZ,rcdata,42949671
(bootloader) [RUU]WP,rcdata,0
(bootloader) [RUU]WP,rcdata,42949671
(bootloader) ...... Successful
OKAY [ 10.628s]
finished. total time: 12.650s
Note: In the device the green bar did not reach the end. And did not reboot.
c. 'fastboot reboot bootloader' - command not recognized
d. 'fastboot reboot' - rebooted into bootloop
e. Manually booted the device into bootloader.
4. Getvar all - Same as previous.
5. Unlocked the bootloader.
C:\Fastboot>fastboot flash unlocktoken Unlock_code.bin
target reported max download size of 1514139648 bytes
sending 'unlocktoken' (0 KB)...
OKAY [ 0.136s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.010s]
finished. total time: 0.149s
Note: The device automatically rebooted into bootloop yet again. Manually rebooted to bootloader it shows *** UNLOCKED ***
6. Re flashed Kairi's TWRP
C:\Fastboot>fastboot flash recovery TWRP-2-7-Kairi.img
target reported max download size of 1514139648 bytes
sending 'recovery' (10572 KB)...
OKAY [ 1.564s]
writing 'recovery'...
OKAY [ 0.977s]
finished. total time: 2.546s
7. Entered Recovery from the device. (To install Kairi's reset kernel) Did not wipe cache/dalvik after installation
Note: - 'adb reboot bootloader' did not work at recovery, thou
C:\Fastboot>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
FA34HPN00627 recovery
C:\Fastboot>adb reboot bootloader
8. Entered bootloader thru TWRP options on the device.
9. Flashed boot.img (extracted from InsertCoin 3.0.6 Zip). Did not erase cache after this.
C:\Fastboot>fastboot flash boot boot.img
target reported max download size of 1514139648 bytes
sending 'boot' (6500 KB)...
OKAY [ 0.926s]
writing 'boot'...
OKAY [ 0.747s]
finished. total time: 1.677s
10. Entered recovery to install InsertCoin Rom.
a. Selected - Perform a full wipe in the installer.
b. Deselected all the checkmarks (for HTC + Google)
c. Selected - 'Enable Cache - All times' in the end
d. Install. (Please refer the attached screen shots)
e. Reboot your Device now from the installer. (HOPE TO boot into android. Fingers crossed).
f. Again Bootloop.
g. Rebooted into bootloader
h. Fastboot the boot image once again erased cache after that.
C:\Fastboot>fastboot flash boot boot.img
target reported max download size of 1514139648 bytes
sending 'boot' (6500 KB)...
OKAY [ 0.926s]
writing 'boot'...
OKAY [ 0.745s]
finished. total time: 1.675s
C:\Fastboot>fastboot erase cache
******** Did you mean to fastboot format this partition?
erasing 'cache'...
OKAY [ 0.068s]
finished. total time: 0.070s
I. Still in bootloop.
Please help/advice.
Please share the link to the HTL21 ROM with NFC support...
Please share the link to the HTL21 ROM update with NFC support... Using now Butterfly_Sense6.0_KK4.4.2_Soul16.0
Thank you!
my dlxu x920e japan (i think version) cant get the insertcoin 2.4.0 release to work can you post how you did it
Lollilop update for Butterfly
Is there any possibility of getting Lollilop update via Insertcoin Rom for M7 on Butterfly?
Thanks
No !
jayc007 said:
Is there any possibility of getting Lollilop update via Insertcoin Rom for M7 on Butterfly?
Thanks
Click to expand...
Click to collapse
No ! i dont think so.. I earlier talk with official mentor of IC ROMS. and he told me that development for x920d has been stopped because they dont have a Butterfly now.
lollipop or at least kk 4.4.4 update for htc butterfly
i am running IC 3.0.6 its running ok, but i have some GPU lag in some games that i didnt have issues with when i was running htc stock 4.3 it not a deal breaker everything else works better, but i was hoping IC update this ROM to a newer version like on HTC DNA, at least KK 4.4.4
thanks
thanks for ur sharing.
My power button quit working, I'm within the 1 year warranty period, and I need to go back to stock after I get my replacement.
Before I call VZW, since I'm rooted and using nV ROM, and I know they ask about the Software, does anyone have a screen shot of the Stock Software screen, Kit Kat unless LP has been pushed?
Thanks!
Sent from my HTC6525LVW using XDA Premium 4 mobile app
EvoNotion said:
My power button quit working, I'm within the 1 year warranty period, and I need to go back to stock after I get my replacement.
Before I call VZW, since I'm rooted and using nV ROM, and I know they ask about the Software, does anyone have a screen shot of the Stock Software screen, Kit Kat unless LP has been pushed?
Thanks!
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
They can see more information than you can tell them. Best bet is to be stock during that call.
Thanks for that input.
So, since the new phone arrived, I've been trying to restore my old phone to stock, S-OF, Unroot and Locked boot loader, etc.
I'm able to ADB into fastboot, however for whatever reason I cannot load the 06BIMG.zip(not at my computer)
Fastboot simply reboots immediately when I adb reboot boatloader.
Is there another way to get a stock image on the phone, remove the red text at boot up, s-off, lock boot loader with stock recovery and unroot?
Everything I've tried seems to be hinged on that fastboot rebooting issue.
Thanks
Sent from my HTC6525LVW using XDA Premium 4 mobile app
EvoNotion said:
Thanks for that input.
So, since the new phone arrived, I've been trying to restore my old phone to stock, S-OF, Unroot and Locked boot loader, etc.
I'm able to ADB into fastboot, however for whatever reason I cannot load the 06BIMG.zip(not at my computer)
Fastboot simply reboots immediately when I adb reboot boatloader.
Is there another way to get a stock image on the phone, remove the red text at boot up, s-off, lock boot loader with stock recovery and unroot?
Everything I've tried seems to be hinged on that fastboot rebooting issue.
Thanks
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
0P6BIMG.zip ?
I typed it from my phone whilst I was enjoying the evening outside. Just the only numbers in my head.
I'm downloading your RUU exe right now Dottat. Didn't realize you're local by an hour to me.
thanks!
dottat said:
0P6BIMG.zip ?
Click to expand...
Click to collapse
So I downloaded your EXE, and I get a failure in regard that it reboots to the HTC logo and the phone reboots immediately, causing the program to fail.
Error 155: unknown error
This is the same problem i was having when trying to do the fastboot push of the RUU I had downloaded previously.
Image version is 1.54.401.10
What ever can i do?
EvoNotion said:
So I downloaded your EXE, and I get a failure in regard that it reboots to the HTC logo and the phone reboots immediately, causing the program to fail.
This is the same problem i was having when trying to do the fastboot push of the RUU I had downloaded previously.
Image version is 1.54.401.10
What ever can i do?
Click to expand...
Click to collapse
Try flashing official stock vzw firmware via SD card. Are your mid and cid stock?
401 isn't vzw firmware BTW
dottat said:
0P6BIMG.zip ?
Click to expand...
Click to collapse
dottat said:
Try flashing official stock vzw firmware via SD card. Are your mid and cid stock?
401 isn't vzw firmware BTW
Click to expand...
Click to collapse
I just remember last year downloading and installing the nV Rom which was 4.4.2. and updating the radios.
I've tried the 0p6bimg.zip method in fastboot, but it fails as well. Maybe I'm doing it wrong, but it's in the root of the SD card.
EvoNotion said:
I just remember last year downloading and installing the nV Rom which was 4.4.2. and updating the radios.
I've tried the 0p6bimg.zip method in fastboot, but it fails as well. Maybe I'm doing it wrong, but it's in the root of the SD card.
Click to expand...
Click to collapse
I can do a team viewer session with you this weekend to take a look with you if you want
dottat said:
I can do a team viewer session with you this weekend to take a look with you if you want
Click to expand...
Click to collapse
That would be tits man. I'll be in Dover tomorrow night if you want to check it out live....LMK
EvoNotion said:
That would be tits man. I'll be in Dover tomorrow night if you want to check it out live....LMK
Click to expand...
Click to collapse
Depends on what time...lol. I work in Lancaster during the week a lot.
dottat said:
Depends on what time...lol. I work in Lancaster during the week a lot.
Click to expand...
Click to collapse
You tell me, I'll probably get out of work around 3pm and head down to York. I have to pick up tools from a friend that's borrowing them for work around 5/530, so whenever.
Since the PWR buttons not working, I'm not able to select HBOOT at the bootloader screen, and the commands I was using to get the HTC black screen fail to push. However, I just renamed your ZIP file and will try again and report back
EvoNotion said:
You tell me, I'll probably get out of work around 3pm and head down to York. I have to pick up tools from a friend that's borrowing them for work around 5/530, so whenever.
Since the PWR buttons not working, I'm not able to select HBOOT at the bootloader screen, and the commands I was using to get the HTC black screen fail to push. However, I just renamed your ZIP file and will try again and report back
Click to expand...
Click to collapse
BTW...from a booted ROM the command adb reboot oem-78
Will land you in ruu mode.
dottat said:
BTW...from a booted ROM the command adb reboot oem-78
Will land you in ruu mode.
Click to expand...
Click to collapse
well now, learn something new everyday. Got me to the HTC screen, and then it rebooted though.
EvoNotion said:
well now, learn something new everyday. Got me to the HTC screen, and then it rebooted though.
Click to expand...
Click to collapse
Can you adb reboot-bootloader and get a fastboot getvar all.
X out your imei and sn
dottat said:
Can you adb reboot-bootloader and get a fastboot getvar all.
X out your imei and sn
Click to expand...
Click to collapse
C:\Users\Abraham\Documents>adb kill-server
C:\Users\Abraham\Documents>adb reboot bootloader
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
C:\Users\Abraham\Documents>fastboot oem rebootRUU
...
(bootloader) Start Verify: 0
OKAY [ 0.027s]
finished. total time: 0.037s
C:\Users\Abraham\Documents>fastboot flash zip 0P6BIMG.zip
target reported max download size of 1826418688 bytes
sending 'zip' (1726320 KB)...
FAILED (data transfer failure (Too many links))
finished. total time: 8.723s
C:\Users\Abraham\Documents>adb reboot bootloader
C:\Users\Abraham\Documents>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.0926
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.11.1700.5
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: XXX
(bootloader) imei: XXXXX
(bootloader) imei2: Not Support
(bootloader) meid: 99000429333087
(bootloader) product: m8_wlv
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B20000
(bootloader) cidnum: VZW__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.141s
C:\Users\Abraham\Documents>
EvoNotion said:
C:\Users\Abraham\Documents>adb kill-server
C:\Users\Abraham\Documents>adb reboot bootloader
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
C:\Users\Abraham\Documents>fastboot oem rebootRUU
...
(bootloader) Start Verify: 0
OKAY [ 0.027s]
finished. total time: 0.037s
C:\Users\Abraham\Documents>fastboot flash zip 0P6BIMG.zip
target reported max download size of 1826418688 bytes
sending 'zip' (1726320 KB)...
FAILED (data transfer failure (Too many links))
finished. total time: 8.723s
C:\Users\Abraham\Documents>adb reboot bootloader
C:\Users\Abraham\Documents>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.0926
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.11.1700.5
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: XXX
(bootloader) imei: XXXXX
(bootloader) imei2: Not Support
(bootloader) meid: 99000429333087
(bootloader) product: m8_wlv
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B20000
(bootloader) cidnum: VZW__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.141s
C:\Users\Abraham\Documents>
Click to expand...
Click to collapse
Try flashing this zip the same exact way...
https://www.androidfilehost.com/?fid=95916177934537898
dottat said:
Try flashing this zip the same exact way...
https://www.androidfilehost.com/?fid=95916177934537898
Click to expand...
Click to collapse
Should I rename it to something?
EvoNotion said:
Should I rename it to something?
Click to expand...
Click to collapse
Should not need to
dottat said:
Try flashing this zip the same exact way...
https://www.androidfilehost.com/?fid=95916177934537898
Click to expand...
Click to collapse
Got half way through and now I'm at the four exclamation marks on the corners
My HTC U11 always stuck in bootloader saying I use an unauthorized software everytime I update to Android Oreo ( official OTA update).
Even if I use RUU to 8.0.
The only thing I can boot my phone is when I use Nougat Rom. Even Costum Rom not helping. It;s very weird that I cannot update to 8.0.
I try leedroid Rom, also same, got back to Bootloader. So I need to reflash the 7.1.1 Rom to enable to boot.
My phone is S-Off with Bootloader Unlocked.
When I try to relock bootloader it will say something like
(bootloader) [KillSwitch] : /dev/block/bootdevice/by-name/frp
(bootloader) [KillSwitch] Last Byte is 0X00, disable unlock
(bootloader) [KillSwitch] oem unlock Turn Off!
OKAY [ -0.000s]
finished. total time: -0.000s
In the Menu is greyed out saying bootloader already unlock.
Thanks in advance for any help.
sing2x said:
My HTC U11 always stuck in bootloader saying I use an unauthorized software everytime I update to Android Oreo ( official OTA update).
Even if I use RUU to 8.0.
The only thing I can boot my phone is when I use Nougat Rom. Even Costum Rom not helping. It;s very weird that I cannot update to 8.0.
I try leedroid Rom, also same, got back to Bootloader. So I need to reflash the 7.1.1 Rom to enable to boot.
My phone is S-Off with Bootloader Unlocked.
When I try to relock bootloader it will say something like
(bootloader) [KillSwitch] : /dev/block/bootdevice/by-name/frp
(bootloader) [KillSwitch] Last Byte is 0X00, disable unlock
(bootloader) [KillSwitch] oem unlock Turn Off!
OKAY [ -0.000s]
finished. total time: -0.000s
In the Menu is greyed out saying bootloader already unlock.
Thanks in advance for any help.
Click to expand...
Click to collapse
Am output of a
Code:
fastboot getvar all
might show us some more, to help you with that very problem. Don't forget to delete your IMEI and SN though.
Tell us which RUU you are using that causes this very problem as well.
Sent from my HTC U12+ using XDA Labs
(bootloader) kernel: lk
(bootloader) product: htc_ocnwhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1562400000
(bootloader) serialno: FA76T1802xxx
(bootloader) slot-count: 0
(bootloader) current-slot:
(bootloader) imei: 990007230168xxx
(bootloader) version-main: 1.28.617.6
(bootloader) boot-mode: download
(bootloader) version-baseband: 8998-001791N-1709131257
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PZC50000
(bootloader) cid: BS_US001
all:
finished. total time: 0.016s
Any RUU, any costum Rom based on Android 8.0 give me error.
Other than that, all 7.1.1 Roms / RUU boots just fine.
It's Sprint Unit , S-Off , and change to BS-US001
return to sprint Rom also no use.
I can receive OTA no problem.
After OTA to 8.0 stuck in Bootloader again saying same error.
sing2x said:
Any RUU, any costum Rom based on Android 8.0 give me error.
Other than that, all 7.1.1 Roms / RUU boots just fine.
It's Sprint Unit , S-Off , and change to BS-US001
return to sprint Rom also no use.
I can receive OTA no problem.
After OTA to 8.0 stuck in Bootloader again saying same error.
Click to expand...
Click to collapse
Well that's it actually. The device only accepts CDMA sprint updates. So it would have to be rebranded and RUU'd back to Sprint to receive updates again. But are you really using an HTC U11? The fastboot command mentions a slot which in general only applies to Treble enabled devices.
Sent from my HTC U12+ using XDA Labs
Ruu back to sprint. Also cannot upgrade to 8.0. Even on OTA update. Yes its U11.
Any help ? it only works with 7.0 Rom. I try almost everything.
I'm starting this thread, cause I have been responding on others threads and that's deviates from the main topic and is not fair to the O.P.
This thread is for request help, partial or full ZIP files, single images or just for S-OFF Request.
Please, provide the question and paste your phone info, by typing: fastboot getvar all
Exemple:
My phone doesn't boot, can I go back to stock?
(bootloader) kernel: lk
(bootloader) product: htc_acawhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1141600000
(bootloader) serialno: HT7120403511
(bootloader) imei: please, no IMEI
(bootloader) version-main: 1.32.651.11
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PYB20000
(bootloader) cid: SPCS_001
I will do my part in my time with you to help you resolve the problem.
HELP! I wasn't able to boot after a seemingly harmless TWRP hard reset(the one where it asks to writ "yes" to confirm), it kept restarting into bootloader mode, so decided to flash the ZIP that you provided in the other thread, as it wasn,t meant for 2PYB20000, i changed my MID to 2PYB10000. It flashed fine, phone turned on, but there were no cellular signals or wifi after reboot, phone doesnt shows it imei in system nor does it shows baseband version.
so far i have tried flashing a proper 2pyb20000 ruu zip, formating the persist partion, then directly rebooting to download mode and reflashing the ruu. but the issue stayed the same.
Please help me solve this issue.
Here are the details.
(bootloader) kernel: lk
(bootloader) product: htc_acawhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1141600000
(bootloader) serialno: HT6AX0401703
(bootloader) current-slot:
(bootloader) imei: Removed
(bootloader) version-main: 1.33.425.6
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.02_U114401031_125.01.70524G_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PYB20000
(bootloader) cid: 11111111
zain rizvi said:
HELP! I wasn't able to boot after a seemingly harmless TWRP hard reset(the one where it asks to writ "yes" to confirm), it kept restarting into bootloader mode, so decided to flash the ZIP that you provided in the other thread, as it wasn,t meant for 2PYB20000, i changed my MID to 2PYB10000. It flashed fine, phone turned on, but there were no cellular signals or wifi after reboot, phone doesnt shows it imei in system nor does it shows baseband version.
so far i have tried flashing a proper 2pyb20000 ruu zip, formating the persist partion, then directly rebooting to download mode and reflashing the ruu. but the issue stayed the same.
Please help me solve this issue.
Here are the details.
(bootloader) kernel: lk
(bootloader) product: htc_acawhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1141600000
(bootloader) serialno: HT6AX0401703
(bootloader) current-slot:
(bootloader) imei: Removed
(bootloader) version-main: 1.33.425.6
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.02_U114401031_125.01.70524G_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PYB20000
(bootloader) cid: 11111111
Click to expand...
Click to collapse
What a mess!
for 2PYB20000, i changed my MID to 2PYB10000. It flashed fine, phone turned on, but there were no cellular signals or wifi after reboot, phone doesnt shows it imei in system nor does it shows baseband version
Click to expand...
Click to collapse
So... you try to convert a BOLT to EVO.
Need to change ID model to 2PYB10000;
Flash latest Europe Version 1.31.404.1;
Flash radio.img from latest Sprint WWE 1.32.651.11 in bootloader.
You just nedded to flash the radio.img from Sprint through fastboot mode to get back the IMEI.
b8engl said:
What a mess!
So... you try to convert a BOLT to EVO.
Need to change ID model to 2PYB10000;
Flash latest Europe Version 1.31.404.1;
Flash radio.img from latest Sprint WWE 1.32.651.11 in bootloader.
You just nedded to flash the radio.img from Sprint through fastboot mode to get back the IMEI.
Click to expand...
Click to collapse
Sort of did that, but flashed the latest sprint stock FW first, so had to do the whole unlocking procedure myself to get it sim unlocked. Then flashed the european latest WWE FW and flashed the Sprint radio on top of it.
Thank a lot for the help man.
zain rizvi said:
Sort of did that, but flashed the latest sprint stock FW first, so had to do the whole unlocking procedure myself to get it sim unlocked. Then flashed the european latest WWE FW and flashed the Sprint radio on top of it.
Thank a lot for the help man.
Click to expand...
Click to collapse
No problem! I'm glad you figured it out.
S-OFF help
Code name: htc_aca
Model 2PYB2
Bootloader version: 1.0.0.0000
CID: SPCS_001
MID: 2PYB20000
Radio: [email protected]
Firmware: ACADIA_WHL_N70_SENSE80GP_SPCS
Kernel: Linux version 3.10.84-perf-gd701a0
Android version: 7.0
HTC Sense: 8.0
SDK Version: 24
Base: 1.32.651.11 8.0_g CL863776 release-keys
Firmware name: Bad Boyz Sprint HTC BOLT v2.1
---------- Post added at 02:06 AM ---------- Previous post was at 02:03 AM ----------
Code name: htc_aca
Model 2PYB2
Bootloader version: 1.0.0.0000
CID: SPCS_001
MID: 2PYB20000
Radio: [email protected]
Firmware: ACADIA_WHL_N70_SENSE80GP_SPCS
Kernel: Linux version 3.10.84-perf-gd701a0
Android version: 7.0
HTC Sense: 8.0
SDK Version: 24
Base: 1.32.651.11 8.0_g CL863776 release-keys
Firmware name: Bad Boyz Sprint HTC BOLT v2.1
b8engl said:
I'm starting this thread, cause I have been responding on others threads and that's deviates from the main topic and is not fair to the O.P.
This thread is for request help, partial or full ZIP files, single images or just for S-OFF.
Please, provide the question and paste your phone info, by typing: fastboot getvar all
Exemple:
My phone doesn't boot, can I go back to stock?
(bootloader) kernel: lk
(bootloader) product: htc_acawhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1141600000
(bootloader) serialno: HT7120403511
(bootloader) imei: please, no IMEI
(bootloader) version-main: 1.32.651.11
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PYB20000
(bootloader) cid: SPCS_001
I will do my part in my time with you to help you resolve the problem.
Click to expand...
Click to collapse
Please help. I installed my twrp backup and now the sound, video playback, and the home/fingerprint sensor don't work. I guess it didn't backup right, to begin with. I really don't know. I'm new to this stuff, but its fun when it works. It's really kinda sad when it doesn't. My Mom just gave me this phone because it needed the screen replaced, but was in perfect condition otherwise and I really don't want her to know I wrecked it. I've been looking for days for a download. I pretty much understand the concept of how to make it work if I had the download. I have adb installed and working and the phone is detected.
Htc 10 Evo UNLOCKED S-ON
(bootloader) kernel: lk
(bootloader) product: htc_acawhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1141600000
(bootloader) serialno: HT6C30401953
(bootloader) current-slot:
(bootloader) imei: removed
(bootloader) version-main: 1.38.615.7
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PYB20000
(bootloader) cid: BS_US001
MaxGor80 said:
Code name: htc_aca
Model 2PYB2
Bootloader version: 1.0.0.0000
CID: SPCS_001
MID: 2PYB20000
Radio: [email protected]
Firmware: ACADIA_WHL_N70_SENSE80GP_SPCS
Kernel: Linux version 3.10.84-perf-gd701a0
Android version: 7.0
HTC Sense: 8.0
SDK Version: 24
Base: 1.32.651.11 8.0_g CL863776 release-keys
Firmware name: Bad Boyz Sprint HTC BOLT v2.1
Click to expand...
Click to collapse
I can see that you have a custom ROM, why do you need security-off?
kentuckylovely said:
Please help. I installed my twrp backup and now the sound, video playback, and the home/fingerprint sensor don't work. I guess it didn't backup right, to begin with. I really don't know. I'm new to this stuff, but its fun when it works. It's really kinda sad when it doesn't. My Mom just gave me this phone because it needed the screen replaced, but was in perfect condition otherwise and I really don't want her to know I wrecked it. I've been looking for days for a download. I pretty much understand the concept of how to make it work if I had the download. I have adb installed and working and the phone is detected.
Click to expand...
Click to collapse
Well...let me see if I can help you with that!
kentuckylovely said:
Htc 10 Evo Bolt UNLOCKED S-ON
(bootloader) kernel: lk
(bootloader) product: htc_acawhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1141600000
(bootloader) serialno: HT6C30401953
(bootloader) current-slot:
(bootloader) imei: removed
(bootloader) version-main: 1.38.615.7
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PYB20000
(bootloader) cid: BS_US001
Click to expand...
Click to collapse
So, for BOLT version. Download link here.
b8engl said:
Well...let me see if I can help you with that!
So, for BOLT version. Download link
Had to remove download link before I could post.
Thank you trying to help so far, but I'm still having problems.
PS C:\WINDOWS\System32\WindowsPowerShell\v1.0> fastboot flash recovery "C:\Users\sherry\Downloads\2PYBIMG_ACADIA_WHL_N70
_SENSE80G[email protected]70303_CNV_1.78_003_release_518263_signed_2_4.zip"
Invalid sparse file format at header magic
error: write_sparse_skip_chunk: don't care size 664647066 is not a multiple of the block size 4096
Sending sparse 'recovery' 1/2 (1048573 KB) error: write_sparse_skip_chunk: don't care size 664647066 is not a mu
ltiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 664647066 is not a multiple of the block size 4096
OKAY [ 93.072s]
Writing sparse 'recovery' 1/2 (bootloader) HOSD CL#992875
(bootloader) [email protected]
(bootloader) ERR image is not valid
(bootloader) [email protected]
(bootloader) [email protected]
Finished. Total time: 173.905s
Finished. Total time: 1
Click to expand...
Click to collapse
kentuckylovely said:
PS C:\WINDOWS\System32\WindowsPowerShell\v1.0> fastboot flash recovery "C:\Users\sherry\Downloads\2PYBIMG_ACADIA_WHL_N70
_SENSE80G[email protected]70303_CNV_1.78_003_release_518263_signed_2_4.zip"
Invalid sparse file format at header magic
error: write_sparse_skip_chunk: don't care size 664647066 is not a multiple of the block size 4096
Sending sparse 'recovery' 1/2 (1048573 KB) error: write_sparse_skip_chunk: don't care size 664647066 is not a mu
ltiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 664647066 is not a multiple of the block size 4096
OKAY [ 93.072s]
Writing sparse 'recovery' 1/2 (bootloader) HOSD CL#992875
(bootloader) [email protected]
(bootloader) ERR image is not valid
(bootloader) [email protected]
(bootloader) [email protected]
Finished. Total time: 173.905s
Finished. Total time: 1
Click to expand...
Click to collapse
I don't know what you are trying to do...
Just rename the file to 2PYBIMG, place in a formated fat32 microSD card, then after inserted the card to phone reboot to download mode. It will update it self!
No matter what I do it says the file is corrupt. Am I doing something wrong? I named it 2PYBIMG.zip and added it to my card but it doesn't start when I boot into download mode. I tried flashing it with twrp and it says it's corrupted.
Sent from my HTC Bolt using XDA Labs
kentuckylovely said:
No matter what I do it says the file is corrupt. Am I doing something wrong? I named it 2PYBIMG.zip and added it to my card but it doesn't start when I boot into download mode. I tried flashing it with twrp and it says it's corrupted.
Click to expand...
Click to collapse
You have TWRP, so bootloader unlocked... then, you need to lock it! You can only do this if you have security off, which is not the case here!
- fastboot oem lock ( this will relock the bootloader );
- fastboot oem rebootRUU ( switch the state to update firmware trough USB );
- fastboot flash zip 2PYBIMG.zip.
You need to verify if you don't have ex: 2PYBIMG.zip ( if that is the case, just select the file press F2 and rename it again to 2PYBIMG ).
b8engl said:
You have TWRP, so bootloader unlocked... then, you need to lock it! You can only do this if you have security off, which is not the case here!
- fastboot oem lock ( this will relock the bootloader );
- fastboot oem rebootRUU ( switch the state to update firmware trough USB );
- fastboot flash zip 2PYBIMG.zip.
You need to verify if you don't have ex: 2PYBIMG.zip ( if that is the case, just select the file press F2 and rename it again to 2PYBIMG ).
Click to expand...
Click to collapse
So I can't even get my phone to go into android now to atempt to get s-off state. Is it a hopeless case now?
Sent from my HTC Bolt using XDA Labs
---------- Post added at 11:46 AM ---------- Previous post was at 11:42 AM ----------
kentuckylovely said:
So I can't even get my phone to go into android now to atempt to get s-off state. Is it a hopeless case now?
Click to expand...
Click to collapse
Also, your download would not unzip, but I found the file somewhere else and bought it and it unzipped ok so I think your file is corrupted somehow. If anyone needs the file I can upload it sometime, my internet is pretty slow so I'm not sure when. But if someone sees this and needs it let me know. I'm just totally at a loss here with my phone though.
Sent from my HTC Bolt using XDA Labs
kentuckylovely said:
Also, your download would not unzip, but I found the file somewhere else and bought it and it unzipped ok so I think your file is corrupted somehow.
Click to expand...
Click to collapse
Because the file is encrypted, that's normal!
b8engl said:
Because the file is encrypted, that's normal!
Click to expand...
Click to collapse
I'm sorry if I offended you. I didn't know it wouldn't open because of that. But is my phone hopeless now?
Sent from my HTC Bolt using XDA Labs
---------- Post added at 11:55 AM ---------- Previous post was at 11:55 AM ----------
kentuckylovely said:
I'm sorry if I offended you. I didn't know it wouldn't open because of that. But is my phone hopeless now?
Click to expand...
Click to collapse
Thank you for trying to help me.
Sent from my HTC Bolt using XDA Labs
kentuckylovely said:
I'm sorry if I offended you. I didn't know it wouldn't open because of that.
Click to expand...
Click to collapse
Take it easy! You didn't offend me in any way.
kentuckylovely said:
Thank you for trying to help me.
Click to expand...
Click to collapse
Well... this is difficult because you don't compreend some basic functions. I recomend that you search purhaps youtube or read some more on some forum. Because I alredy sent the correct file! You only need to do the steps correctly to get back the phone again.
Please, don't repost the same issue on the thread. Just send me a private message, I will respond through there.
b8engl said:
What a mess!
So... you try to convert a BOLT to EVO.
Need to change ID model to 2PYB10000;
Flash latest Europe Version 1.31.404.1;
Flash radio.img from latest Sprint WWE 1.32.651.11 in bootloader.
You just nedded to flash the radio.img from Sprint through fastboot mode to get back the IMEI.
Click to expand...
Click to collapse
what will be the command to flash the radio.img ?????
---------- Post added at 03:49 PM ---------- Previous post was at 03:28 PM ----------
how to get S-OFF because it in S-ON HTC 10 evo
no fastboot flashing possible friends
CID-HTC__059
MID-2PYB20000
OS-1.33.425.6
Sanaullahshuaib said:
how to get S-OFF because it in S-ON HTC 10 evo
no fastboot flashing possible friends
CID-HTC__059
MID-2PYB20000
OS-1.33.425.6
Click to expand...
Click to collapse
If you have # you could try dd command!
Also you can get S-OFF easily with this service on eBay.
No root so how dd method
Hi all,
Maybe someone could push me in the right direction here. I unlocked my HTC U11 and went searching for a good CFW with MHL support. Sadly many don't have decent MHL support, thanks Google! I went into recovery steps, locked the bootloader and flashed official 3.34.401.1 rom. That went fine, but now the phone is stuck at the pattern screen.
Phone works fine, but the pattern is not set by me, almost as if the stock firmware has some secret pattern. It won't ask me to setup my google account and factory defaults doesn't fix the issue.
Current rom file: 2PZCIMG_OCEAN_UHL_P90_SENSE10GP_MR_HTC_Europe_3.34.401.1_Radio_8998-200321-1905141529_release_signed.zip
Device info:
(bootloader) kernel: lk
(bootloader) product: htc_ocnuhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1560000000
(bootloader) serialno: xxxx
(bootloader) slot-count: 0
(bootloader) current-slot:
(bootloader) imei: xxxx
(bootloader) version-main: 3.34.401.1
(bootloader) boot-mode: download
(bootloader) version-baseband: 8998-200321-1905141529
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PZC10000
(bootloader) cid: HTC__034
Thanks in advance!
ristodesign said:
Device info:
(bootloader) kernel: lk
(bootloader) product: htc_ocnuhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1560000000
(bootloader) serialno: xxxx
(bootloader) slot-count: 0
(bootloader) current-slot:
(bootloader) imei: xxxx
(bootloader) version-main: 3.34.401.1
(bootloader) boot-mode: download
(bootloader) version-baseband: 8998-200321-1905141529
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PZC10000
(bootloader) cid: HTC__034
Click to expand...
Click to collapse
To the one/those answering:
How can one have 0 slots?
That's odd, isn't it? I mean there are a/b partitioned devices and 'a' partioned devices out there.
So the slot-count is either 2 (a/b) or 1 (a).
To @ristodesign: Before flashing you had no pattern? And you did a factory data reset with your recovery?
Hi, yes. I tested LineageOS and Goole PixelExperience, but should have known there was no MHL support. Then I tried Viper and LeeDroid, but those didn't enable Wifi somehow.
Then decided to get back to the stock ROM provided by Ziand: https://androidfilehost.com/?fid=1899786940962575313
Locked the bootloader and renamed the rom file to 2PZCIMG.zip so I could restore from booting in download. File was accepted and everything went back to normal. Got a welcome screen, was forced to enable wifi, then suddenly some pattern lock, which does not give any option to escape. Perviously used patterns are certainly not working.
Factory reset does not clear the pattern lock. Which makes me quite unique I guess. ;-)
ristodesign said:
Hi, yes. I tested LineageOS and Goole PixelExperience, but should have known there was no MHL support. Then I tried Viper and LeeDroid, but those didn't enable Wifi somehow.
Then decided to get back to the stock ROM provided by Ziand: https://androidfilehost.com/?fid=1899786940962575313
Locked the bootloader and renamed the rom file to 2PZCIMG.zip so I could restore from booting in download. File was accepted and everything went back to normal. Got a welcome screen, was forced to enable wifi, then suddenly some pattern lock, which does not give any option to escape. Perviously used patterns are certainly not working.
Factory reset does not clear the pattern lock. Which makes me quite unique I guess. ;-)
Click to expand...
Click to collapse
Maybe you can try to boot twrp and see if it asks to decrypt?
The thing is: Passwords, pins, patterns etc. should be stored in the userdata partition. If you wipe this partition, the pattern should be gone.
However, if you manage to boot twrp and to have the userdata partition decrypted (go to /data and see if those entries aren't "randomized" letters), we should be able to delete this manually.
Else I'd like to know whether that pattern has been coded into the update zip you applied... Don't know how to accomplish that, however. But I'll see if I figure out something for the case twrp doesn't work.
You could also try another file like this one from here: https://htcstockrom.com/htc-u11
Will try to get trwp back on the device. It was removed and USB debugging probably disabled.
I did try the rom at https://htcstockrom.com/htc-u11 , after all those Visual C++ x86/x64 fixes it finally worked to start, but at the end it wouldn't accept to downgrade 3.34.401.1 to 2.42.617.7.
ristodesign said:
Will try to get trwp back on the device. It was removed and USB debugging probably disabled.
I did try the rom at https://htcstockrom.com/htc-u11 , after all those Visual C++ x86/x64 fixes it finally worked to start, but at the end it wouldn't accept to downgrade 3.34.401.1 to 2.42.617.7.
Click to expand...
Click to collapse
I see.
You only need to boot twrp temporarily, no need to flash it. Just do:
Code:
fastboot boot twrp.img
EDIT: What if you reflash LineageOS and then the older firmware mentioned above?
LineageOS should allow downgrades.
Good idea, i tried with this result:
downloading 'boot.img'...
OKAY [2.4sec]
booting...
(Then it stops)
Phone screen shows:
Flash image succes
Start downloading (1/1)
It stops there.
ristodesign said:
Good idea, i tried with this result:
downloading 'boot.img'...
OKAY [2.4sec]
booting...
(Then it stops)
Phone screen shows:
Flash image succes
Start downloading (1/1)
It stops there.
Click to expand...
Click to collapse
Oh, well...
That's strange... Then go for the method you already know.
What did you do earlier to flash twrp? Same command but "flash boot"?
EDIT:
I think you flashed it using
Code:
fastboot flash recovery twrp.img
right?
If so, maybe you can boot it somehow similar like this:
Code:
fastboot boot recovery twrp.img
.
Earlier I had to unlock the phone with the HTC Dev website. I created an Unlock_code.bin file. But if I try to flash now it will not accept.
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 1.002s]
writing 'unlocktoken'...
(bootloader) flash unlocktoken
(bootloader) [KillSwitch] : /dev/block/bootdevice/by-name/frp
(bootloader) [KillSwitch] Last Byte is 0X00, disable unlock
(bootloader) [KillSwitch] oem unlock Turn Off!
So USB debugging and the OEM lock seems to have set to default by flashing the stock rom.
ristodesign said:
Earlier I had to unlock the phone with the HTC Dev website. I created an Unlock_code.bin file. But if I try to flash now it will not accept.
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 1.002s]
writing 'unlocktoken'...
(bootloader) flash unlocktoken
(bootloader) [KillSwitch] : /dev/block/bootdevice/by-name/frp
(bootloader) [KillSwitch] Last Byte is 0X00, disable unlock
(bootloader) [KillSwitch] oem unlock Turn Off!
So USB debugging and the OEM lock seems to have set to default by flashing the stock rom.
Click to expand...
Click to collapse
If you do
Code:
fastboot getvar all
do you get something like this?:
(bootloader) unlocked:yes
Click to expand...
Click to collapse
Nope, it does not. When I try to flash it states that the bootloader is locked. The phone screen shows:
HTC download mode
*** RELOCKED ***
*** PRODUCTION ***
htc_ocnuhl PVT S-ON
yada yada yada... ;-)
ristodesign said:
Nope, it does not. When I try to flash it states that the bootloader is locked. The phone screen shows:
HTC download mode
*** RELOCKED ***
*** PRODUCTION ***
htc_ocnuhl PVT S-ON
yada yada yada... ;-)
Click to expand...
Click to collapse
Well, maybe you should research how to unlock an relocked bootloader.
I heard that some bootloader won't unlock again after relocking, which is why I never relocked my devices bootloader...
Hehe, yes it might be not too smart but it was the fastest solution as I could not find a working MHL CFW. I'll give my kids some money if they can find the pattern lol.