The last time I ever see my Tablet Gt N8000 (Made in Vietnam) :crying:
Before it happend I was eating a Hamburger, I just use my camera and made a video...You know, some random videos like crappy stuff.
Then after I stop recording, It just hangs and reboot.
It just got stuck on Samsung Logo, I was not scared that time, I tried to use recovery like pressing Volume Up and Power Button,
you guys all said it was easy to use recovery, but NO, NOT FOR ME.
My tablet is so different that he wont let me use Recovery.
When I pressed the Power Button + Volume Up, It boots. I was waiting for the recovery screen but NO! Something bad happend It boots again.
Whenever I try to use recovery, it boots again like
I pressed the key to go to Recovery Mode
it says "Samsung Galaxy Note 10.1"
Then OFF then there goes again "Samsung Galaxy Note 10.1"
But it didnt go recovery mode, it goes to "Samaung Logo" now.
Its like denying my Recovery Command.
Then I have no choice but to use Odin and the Samsung N8000 Firmware.
I used Vietnam, go to odin then put the md5 then start.
THEN SOMETHING HAPPEND! It FAILED! I did it again, I unplugged and plugged the USB then FAILED! FAILED! FAILED! F*CKING FAILED!
F*CK THIS SH*TTY TABLET.
I try to find a way but no! Nothing. Only a Legend can solve this problem.
If you comment about more firmwares..No! Just No! I Tried It.
I Even USED 2 DIFFERENT FIRMWARES! ALL VIETNAM!
This is harder than you think.
R.I.P Samsung Galaxy Note 10.1 GT-N8000. :crying:
Some information may help .
What firmware what fail error in Odin .
Or see multiple identical Odin / firmware fail posts .
Mine is made in viet too. Fortunately, i dont have any issue at all. I suggest to bring your tablet to your trusted phone repairer and tell them what's your problem. Because it's hard to predict(diagnose) what's going on whit your tablet. It may caused by emmc/camera sensor error, so you need to replace one/both of them. if you lucky enough, it well be just firmware failure.
Related
Hello,
I'm new to the community. I generally work on PC but a friend brought me this Samsung Galaxy tab 7.0 Plus that turns on but is stuck at the "Samsung Galaxy tab 7.0 Plus" splash screen when it first turns on. I have tried the" Power+Vol up" to reset to factory but it seems to go too-quickly and then I am back to square one because nothing changed. I dont know if my friend or his kids tried to do anything crazy with this so I don't have much more info.
What I am asking... I want to get this tab back to factory, or at least a working ROM. any advice is helpful but please keep in mind I have never really worked on these devices, the one thing I do know is if I jump to conclusions I can brick the device.
Thanks in advance. If more info is needed please ask.
did you try with a retore power + vol down with Odin
http://www.sammobile.com/firmware/?page=3&model=GT-P6210&pcode=XAR&os=1&type=3#firmware
choose between 3.2 honeycomb or 4.0.4 ICS
I got the same problem before !!!
http://forum.xda-developers.com/showthread.php?t=1827942
There is my solution
I had a very similar problem to both of you and noticed that the /data (instead of /efs) directory/partition "didn't exist" according to the boot screen when i entered the default recovery mode. i partitioned it and ran a factory reset and it finally booted.
and all just in time to pull the factory US ICS update
Hi,
I installed CEBERUS V5 ROM in my Galaxy Ace without any problem, it works perfectly, when installing it on my brother's phone, it did everything OK until the last reboot in ClockWorkRecovery, the phone restarted as spected but it got stuck with the Samsung Galaxy Ace logo, it doesn't do anything else. I can't access recovery or download mode, it shows exactly the same samsung screen when doing the key combinations for each case.
When I plug it to power it doesn't show the battery image, it automatically turns on and shows samsung logo again. If I plug it to my PC it's the same and the PC doesn't recognize any plugged device. I took the battery and tried again thousand of times, and nothing seems to get that screen out.
Is there anyway I can solve this?
In case there's no chance to fix it, I have a warranty for the phone, is there anyway my provider can notice I tried to install a custom ROM?
Anyway I would prefer fixing it myself, please can you give me some advice?
Thanks a lot!
Good day. everyone. My Tab ( Samsung Galaxy Tab 3 7.0 [SM-T210 ] ) have been frozen in the logo after i restart it by holding the power button when it started to freeze after I connected it to the internet one day. After that it still stuck in the samsung logo so I decided to drain the battery then charge it again, and the screen shows a loading battery and still stuck in there. I researched online about how to fix it and tried to flash a tar.md5 file ( I knew it was a firmware or a kitkat update for my tab ) and says complete write something, then i found a video online to use twrp to flash the kitkat update. So I flash it, ended successfully and ended up stuck again in the same situation but cannot go to download mode anymore, tried to search online about this, found nothing the same situation I have. My question is, if my tab is hard brick or just frozen, and how can it be fixed.
Sorry for my bad english and for being noob about this topic. Thank you.
Hi everyone
I have GT-N8000 2012 version. A week ago it suddenly went off and I am no longer able to turn it on, i.e. after showing the Samsung white logo, it is restarted. I have tried flashing different firmware versions but it doesn't help. Also the Power+VolumUp combination does not show any menu (I think it usually boots a menu for factory reset). What can I do? (I prefer being able to recover my data).
Thanks in advance
Same problem here, on same device type (N8000 2012, standard stock samsung firmware).
Mine doens't even reach the Samsung logo. It just gets to the 1st screen (Galaxy Note 10.1 white message) and reboots after a couple of seconds.
Also can get to any menu using Power & VolumeUp (doesn't seen to have any effect). Only Power &VolumDown gets to the Download menu.
Unless this is a Hardware problem I wanted to factory reset the device, hopping this would clean "everything" but put it running again.
Thanks
Suggest flash stock rom via Odin ,and download mode.
try this one
jchicau said:
Same problem here, on same device type (N8000 2012, standard stock samsung firmware).
Mine doens't even reach the Samsung logo. It just gets to the 1st screen (Galaxy Note 10.1 white message) and reboots after a couple of seconds.
Also can get to any menu using Power & VolumeUp (doesn't seen to have any effect). Only Power &VolumDown gets to the Download menu.
Unless this is a Hardware problem I wanted to factory reset the device, hopping this would clean "everything" but put it running again.
Thanks
Click to expand...
Click to collapse
no worries. it happens. soft brick situation
you need a stock rom for your device or back up rom.
go back to PC and start ODIN, cable in, then boot your device under download mode not recovery.
once it is in download mode, flash your device using ODIN.
allow to reboot.
un-bricked device.:good:
stock ROMs are here in case you are looking
https://www.sammobile.com/firmwares/
https://www.stockrom.net/samsung
let me know how it goes.
Hey, I bought a galaxy note 4 which as the seller said "doesnt turn on anymore or gets stuck on boot logo".
I can confirm this issue. first time it booted up and said something with "reactivation lock" I couldn't read all cz it just rebooted and is now either stuck on boot logo or shows "recovery booting" in a blue font in the upper left corner but nothing happens. Also I can not boot into recovery mode. The hardware buttons are ok as I can click volume up during booting into download mode. I searched the whole internet and found this unbrick thread: https://pastebin.com/7KQxRRNF which I followed exactly. not the first time I'm fixing such issues but this time I'm out of knowledge. this thread didn't work it ended up in boot loop. I used the correct firmware I guess?..
there are plenty of firmwares. my model: N910F (vodafone branded I think cz it was showing a vodafone screen before it got this issue).
I tried using Samsung Kies but it says my model is not supported. same in SmartSwitch (not supported model). then I downloaded an older version of Kies 2.7 and it says connecting but even after 20 minutes or so nothing happens. I reinstalled the drivers several times, I'm using the OG Cable plugged into the motherboard directly. no hubs or frontpanel things (laptop). the only thing I can do with this phone is go into download mode. I don't know if this has something to do with this stupid reactivation lock in Download Mode it says "on". but I find only tutorials how to bypass this when you can boot the phone "aka samsung account trick". so useless for me.
Can I flash stock firmware with reactivation lock=on at all? or is that impossible? If so how can I disable this stupid lock? I never had a phone which broke my mind as hard as the note 4.. and I had many phones from many different brands and actually thought china phones like xiaomi are hard to crack or set back to stock n stuff..
Please help. I can not power it on nothing happens. battery removed for 5 minutes while holding the power key. nothing. only download mode is possible. and only if it's plugged into my pc. what the heck is wrong with this phone? sending it to support center is no option.