Related
Hi, I want to flash a development RUU, but everytime I try, I get Error [155]. This RUU is supposed to have 1.13.0000 bootloader version, but I don't know how to update from 1.06.0000 and if it may cause the error.
Any suggestion about it? Thanks in advance.
You're talking about ONE S, right?
Right, HTC One S
Well first of all is the chosen RUU compatible with your CID ?? If it isnt it will fail so you need to download one that is compatible, Or change your CID to match the one inside the RUU..
Secondly, If you haver done this and still get the error, Try to run the RUU from fastboot.
Oh and also, RUU requires a LOCKED / RELOCKED bootloader and sometimes stock recovery too !
azzledazzle said:
Well first of all is the chosen RUU compatible with your CID ?? If it isnt it will fail so you need to download one that is compatible, Or change your CID to match the one inside the RUU..
Secondly, If you haver done this and still get the error, Try to run the RUU from fastboot.
Oh and also, RUU requires a LOCKED / RELOCKED bootloader and sometimes stock recovery too !
Click to expand...
Click to collapse
Yes, I have the same CID that is inside the RUU.
Could you tell me how to run it from fastboot?
I'm trying almost everything I can (locked, relocked, unlocked, stock recovery...), even I'm trying now to update to the latest OTA_Ville_U_HTC_Europe_1.78.401.2-1.53.401.2 (now I have 1.53.401.2 from Orange Spain) as it has a firmware update (maybe hboot 1.13.0000?) what I think that can be one of the reasons why I can't flash the rom I need.
Thanks in advance!
boot into bootloader and connect USB cable, Select fastboot and then run the RUU on your PC.
Make sure bootloader is locked BEFORE running the ruu
azzledazzle said:
boot into bootloader and connect USB cable, Select fastboot and then run the RUU on your PC.
Make sure bootloader is locked BEFORE running the ruu
Click to expand...
Click to collapse
Yes, it's something I've already tried. Another problem I'm trying to solve is when installing from stock recovery, cause it says sdcart can't be mounted...
What are you trying to install from Stock Recovery ?? you cant flash an RUU and all flashable zip files MUST be signed otherwise it will fail..
I also had the cant mount sd card error in stock recovery, But when i tried CWM i didnt.. Dont know much about how stock recovery works, I just know i dont like it lol
lol, me neither!!!
I'm trying to install a stock rom, so I am supposed to do it from stock recovery, that's the matter. But I can't do it because it can't mount sdcard. I'm getting crazy, but now it is something personal, between the phone and me!!! I'll try to be patient and find the solution.
Stock ROM ?? How have you obtained this ? has someone posted it in a flashable .zip file ? If so, You need to flash it via CWM Recovery THEN flash stock recovery through fastboot.
If the Stock ROM is a Nandroid you will also need to restore this using CWM Recovery. THEN flash stock recovery after.
If the Stock ROM is dissected from an RUU you will need to flash this via bootloader, BUT unless you have a S-OFF phone (which i doubt you do cause there is no S-OFF yet) It wont work.
azzledazzle said:
Stock ROM ?? How have you obtained this ? has someone posted it in a flashable .zip file ? If so, You need to flash it via CWM Recovery THEN flash stock recovery through fastboot.
If the Stock ROM is a Nandroid you will also need to restore this using CWM Recovery. THEN flash stock recovery after.
If the Stock ROM is dissected from an RUU you will need to flash this via bootloader, BUT unless you have a S-OFF phone (which i doubt you do cause there is no S-OFF yet) It wont work.
Click to expand...
Click to collapse
Ok, it is the third option, and evidently, I'm not S-OFF. I had read a thread where they dissected this zip and I thought it was useful. Now I have found the RUU, I will try to install it. I've changed the zip and relocked it but I'm still finding Error [155]
Its useful if you are S-OFF, You just extract the ROM.zip from the RUU, Rename it to the phones model number, So in our case it would be PG40100.img ( i think) and then flash it in bootloader. However ignore this option as it wont work with a S-ON device...
If you still get the Error 155 message and you're positive you've done everything correctly, Maybe download the same / another RUU, Chances are it could have been a bad / corrupted download It happens to us all !
Ok, finally I solved it. I found original RUUs for HTC_Europe 1.53 and 1.78
Firstly, I changed my CID to HTC__001, extracted recovery.img from 1.53 RUU, flashed it, relocked the bootloader and installed the 1.53 RUU... and it worked!!! After that, nothing special to say installing 1.78 (hboot and radio updated!)
rpachecoh said:
Ok, finally I solved it. I found original RUUs for HTC_Europe 1.53 and 1.78
Firstly, I changed my CID to HTC__001, extracted recovery.img from 1.53 RUU, flashed it, relocked the bootloader and installed the 1.53 RUU... and it worked!!! After that, nothing special to say installing 1.78 (hboot and radio updated!)
Click to expand...
Click to collapse
I have done exactly (!!) the same, but you know, I have Hboot in version 2.15. And I can run none of RUUs, because I think they are not compatible with this version of Hboot (And this is that Error 155 for me). Well, so what can I do for installing the Stock RUU to my One S ?
cheers!
Status of my HTC:
Now it's RELOCKED
It has the original Recovery and Super CID (11111111)
BUT:
I can't flash any Stock rom! I always get the error 155! The bad thing is, I am not able to use a custom rom because, some of the Stock rom erased my flash!
but but but! the best thing is , I can't unlock the bootloader now! With the old unlock_boot.bin I will get an error and if I want to get a new Code from HTCDEV.com I also get an Error on the side, and they say, that the code is too long or not right (but I know how to copy and paste the text )
Why I want to go back to Stock?
First of all, I had an Wlan problem, which I solved but after that, i always got the Error (with Custom Roms) that the Android Keyboard (AOSP) will be closed, so I had no keyboard to work with
What can I do?
I only want to go back to my Custom Rom or the Stock ROM!!!!!
thesoldier16 said:
cheers!
Status of my HTC:
Now it's RELOCKED
It has the original Recovery and Super CID (11111111)
BUT:
I can't flash any Stock rom! I always get the error 155! The bad thing is, I am not able to use a custom rom because, some of the Stock rom erased my flash!
but but but! the best thing is , I can't unlock the bootloader now! With the old unlock_boot.bin I will get an error and if I want to get a new Code from HTCDEV.com I also get an Error on the side, and they say, that the code is too long or not right (but I know how to copy and paste the text )
Why I want to go back to Stock?
First of all, I had an Wlan problem, which I solved but after that, i always got the Error (with Custom Roms) that the Android Keyboard (AOSP) will be closed, so I had no keyboard to work with
What can I do?
I only want to go back to my Custom Rom or the Stock ROM!!!!!
Click to expand...
Click to collapse
Well, I imagine with the RUU you got back to a stock ROM... At any rate, you could try reflashing the RUU, or attempt to flash a different RUU (since you have SuperCID) and then see if your still having issues with getting a new unlock_boot.bin.
I imagine your 100% sure you know how to cut and paste? LOL I have to ask (even though you said it)... I was able to unlock my bootloader after flashing a newer RUU and didnt have this issue.
AKToronto
Well, I imagine with the RUU you got back to a stock ROM... At any rate, you could try reflashing the RUU, or attempt to flash a different RUU (since you have SuperCID) and then see if your still having issues with getting a new unlock_boot.bin.
Click to expand...
Click to collapse
Good aspect, but (now I love this word ) I tested nearly every Europe RUU and I always get the 155!
Some people said, that one of the latest RUU works with the CID :
RUU_Ville_U_HTC_Europe_1.78.401.2_Radio_0.16.31501S.17_2_10.23.31501S.10L_release_258480_signed
At tis moment I found this rom, I will test it tomorrow!
I imagine your 100% sure you know how to cut and paste? LOL I have to ask (even though you said it)... I was able to unlock my bootloader after flashing a newer RUU and didnt have this issue.
Click to expand...
Click to collapse
Come on man! I unlocked the bootloader Soooo this is not the problem for me!
I read in some threads, that you can't generate a new .bin file with htcdev when you have on working Rom on your phone haha funny, yeah and I am not able to put a normal stock rom on the phone
This is a long shot, but if you still have a custom recovery, try loading it up and flashing this: http://www.mediafire.com/?l35x37414jhwual
That package will set your mainver to the lowest possible number, which combined with SuperCID will allow flashing of any RUU.
If that doesn't work, you'll have to keep trying the htcdev to get your unlock code. It's possible that the website could be having some temporary problems. If all else fails, shoot an e-mail to HTC Support with screenshots of the errors on the website, the fastboot errors, a picture of your phone's HBOOT, your old unlock_code.bin and your identifier token.
Edit: Oops, just read that you had the original recovery :/ Yeah, try the absolute latest RUU and if that doesn't work, you'll need a new unlock code to have any progress.
what is your hboot version?
thesoldier16 said:
I only want to go back to my Custom Rom or the Stock ROM!!!!!
Click to expand...
Click to collapse
The unlock_code.bin file you get from HTC is generated using fingerprints on your phone. When you changed your CID it's like changing a fingerprint. All you have to do is go through the unlocking process again and get a NEW unlock_code.bin from HTC Dev.
thesoldier16 said:
I always get the error 155! The bad thing is, I am not able to use a custom rom because, some of the Stock rom erased my flash!
Click to expand...
Click to collapse
Most likley you are trying to use a RUU that have a lower hboot then yours. You can only use an RUU that has the same version or a higher hboot.
thesoldier16 said:
It has the original Recovery and Super CID (11111111)
I can't flash any Stock rom!
Click to expand...
Click to collapse
If you have the original recovery you need to flash a custom recovery first. Find TWRP and flash that.
what is your hboot version?
Click to expand...
Click to collapse
It's the version 1.14.0002
Ok these roms don'tt work for me:
RUU_Ville_U_H3G_UK_1.53.771.4_Radio_0.15.31501S.19_2_10.13.31501S.06L_release_251870_signed.exe -> I tried this rom with my old CID , it was H3G__106
RUU_Ville_U_HTC_Europe_1.53.401.2_Radio_0.15.31501S.19_10.12.31501S.06L_release_251412_signed.exe
RUU_Ville_U_HTC_Europe_1.78.401.2_Radio_0.16.31501S.17_2_10.23.31501S.10L_release_258480_signed.exe
EDIT EDIT EDIT:
I got a new code from htcdev!
my problem was, I paste the text with the "info" . ok it was my fault, but now i have to try, to get my custom Recovery back!
One question, if I replace the SUPER CID with the HTC__001 one, can I flash the HTC Europe ones? (the 1.53 or the 1.78?)
Click to expand...
Click to collapse
thesoldier16 said:
It's the version 1.14.0002
Ok these roms don'tt work for me:
RUU_Ville_U_H3G_UK_1.53.771.4_Radio_0.15.31501S.19_2_10.13.31501S.06L_release_251870_signed.exe -> I tried this rom with my old CID , it was H3G__106
RUU_Ville_U_HTC_Europe_1.53.401.2_Radio_0.15.31501S.19_10.12.31501S.06L_release_251412_signed.exe
RUU_Ville_U_HTC_Europe_1.78.401.2_Radio_0.16.31501S.17_2_10.23.31501S.10L_release_258480_signed.exe
EDIT EDIT EDIT:
I got a new code from htcdev!
my problem was, I paste the text with the "info" . ok it was my fault, but now i have to try, to get my custom Recovery back!
One question, if I replace the SUPER CID with the HTC__001 one, can I flash the HTC Europe ones? (the 1.53 or the 1.78?)
Click to expand...
Click to collapse
The problem is that you trying to use RUU's with a lower Hboot then what you got it will never work without a downgrade. Its has to be the same or higher then what you got.
I have a couple questions.
I am on the 1.16 hboot with cid111111 and s-off unlocked tampered. twrp and maximus rom.
I finally did super cid and s-off on my one-s. Shortly after I recieved a notification that ota update 3.16.401.8 (612.27 mb) was available.
I was wondering if it would even work if i attempted to update. or would i have to update manually. Or would it brick it.
The main reason i would want to update is because the JB Sense roms just dont seem to run smoothly on my phone.
I was thinking this would update everything so the custom roms run smoother.
And Should i even update my hboot. does it make a difference.
I would usually be against it(ive had to downgrade other phones before).
Never take an OTA if you are on a custom rom with a custom recovery. Especially if you have SuperCID, unless you want a paperweight. If you want that OTA, you need to get you original CID, flash stock recovery, relock bootloader, then flash an RUU for your carrier.
impostle said:
Never take an OTA if you are on a custom rom with a custom recovery. Especially if you have SuperCID, unless you want a paperweight. If you want that OTA, you need to get you original CID, flash stock recovery, relock bootloader, then flash an RUU for your carrier.
Click to expand...
Click to collapse
Ok. ill look into that. sounds easy enough. last time i tried to update, i couldnt because of my cid. now i guess since there is an official t-mob i can do it?
You cant flash an ruu with super cid?
Oh and also, Once i update my hboot am i able to install the older ICS roms like maximus. thats just the most stable one i have found for my particular phone.
One more. Will i be able to restore my cid with s-off
ruu update
i relocked, then changed my cid to HTC__001
I triedto update via ruu exe file. but i got an error 155.
Im not sure how to update via the zip of the ruu. if its possible.
Also cant find any instruction or files for the original recovery.
I will try to install ota. hopefully i dont end up with a new frisbee.
If i were to extract the framwork.zip frim the ruu zip then install it via fastboot. would that give me the latest hboot. then maybe i could install the updates.
myphonesbetter said:
i relocked, then changed my cid to HTC__001
I triedto update via ruu exe file. but i got an error 155.
Im not sure how to update via the zip of the ruu. if its possible.
Also cant find any instruction or files for the original recovery.
I will try to install ota. hopefully i dont end up with a new frisbee.
If i were to extract the framwork.zip frim the ruu zip then install it via fastboot. would that give me the latest hboot. then maybe i could install the updates.
Click to expand...
Click to collapse
If you update your Hboot that kind makes it more difficult to flash custom roms. You should just find a nice custom jellybean rom, there are some good ones out there.
impostle said:
If you update your Hboot that kind makes it more difficult to flash custom roms. You should just find a nice custom jellybean rom, there are some good ones out there.
Click to expand...
Click to collapse
updating your hboot makes no significant difference (its a myth that its more difficult to flash custom roms on a later hboot).
im on latest hboot and can flash all things i want.
and if your device is S-off dont bother to relock your device/reinstall stock recovery. It will get overwritten anyways.
only thing important is to change the cid. you can always install a older hboot if s-off
have you tried the ruu.exe while in fastboot-usb?
real187 said:
updating your hboot makes no significant difference (its a myth that its more difficult to flash custom roms on a later hboot).
im on latest hboot and can flash all things i want.
and if your device is S-off dont bother to relock your device/reinstall stock recovery. It will get overwritten anyways.
only thing important is to change the cid. you can always install a older hboot if s-off
have you tried the ruu.exe while in fastboot-usb?
Click to expand...
Click to collapse
When I said it was more difficult I meant it was more work, having to flash the boot.img separately. If you are on a lower Hboot you don't have to do that. Also if you are going to suggest he do S-Off you should at least give him a warning about some of the issues people have ran into after doing it.
EDIT: Thats what I get for watching too many threads, I miss stuff.
impostle said:
When I said it was more difficult I meant it was more work, having to flash the boot.img separately. If you are on a lower Hboot you don't have to do that. Also if you are going to suggest he do S-Off you should at least give him a warning about some of the issues people have ran into after doing it.
Click to expand...
Click to collapse
he is already S-off. (see first post)
but anyways, if you dont do research before you do something, and it fuks up your device, its still gonna be your own fault.
what issues your talking about?
real187 said:
he is already S-off. (see first post)
but anyways, if you dont do research before you do something, and it fuks up your device, its still gonna be your own fault.
what issues your talking about?
Click to expand...
Click to collapse
I saw a thread about people losing 3g/4g data after an S-Off.
With S-Off you are made in the shade, you can downgrade your Hboot just by running the appropriate RUU. But you have to change your CID back to what is was before you try to flash the RUU.
impostle said:
I saw a thread about people losing 3g/4g data after an S-Off.
With S-Off you are made in the shade, you can downgrade your Hboot just by running the appropriate RUU. But you have to change your CID back to what is was before you try to flash the RUU.
Click to expand...
Click to collapse
I have seen the tread. But im scepitical, because if it really was only because of the s-off more people should have it. Might be hardware related.
Eh you do not have tot change back your Cid to original (if its a branded Cid the ruu still wont run), just a valid HTC Cid.
Verstuurd van mijn One S met Tapatalk
He could flash from recovery or fastboot flash any hboot he wants with s-off. No RUU needed for downgrade or upgrade. That's only needed to go back to stock for warranty purposes.
@myphonesbetter
If you want the red warning text overlay to be gone as well choose any of the files here and flash it within recovery. S-Off needed to do so!
To remove ***Tampered*** as well download hboot 1.140004. You will need to come from a lower hboot version so if you're already on >1.140004 flash one <1.140004 first.
--- edit ---
You can lock/unlock your phone as well by flashing. Read more in [how to] reset your lock status flag. Also it's in the Droid DNA forums it's valid for One S. Remember: You need s-off for this to work.
--- and one more ---
You can change your CID pretty simple on rootet devices. Just enter fastboot mode and type:
'fastboot oem writecid HTC__001'
Reboot bootloader then. You can find a collection of HTC ONE S CID's here
^^^^^Very helpful post. thank you. I wouldve never found that.
When you run the ruu .exe, do you have to be in fastboot or in android? The install app told me just to turn the phone on so i figured it would automatically go into bootloader. but it did nothing at all to my phone and gave me an error 115.
When i tried the ota it tells me that I am runnning an altrered OS and i will have to install it a different way.
Sorry for the easy questions. but i just cant seem to find any threads that say how to. I found the ruu and a zip of the ruu. but not how to install it.
The best sense rom has instructions on flashing a newer hboot. .but i want to install a completely stock rom.
myphonesbetter said:
^^^^^Very helpful post. thank you. I wouldve never found that.
.
Click to expand...
Click to collapse
guess you run out of thanks, no?
Never even noticed the thanks meter. I have more of a direct thank you approach.
I tried to flash the ruu .exe in fastboot. and it actually rebooted into the black htc screen, so i figure thats the way to do it.
Unfortunately I got another error. image error (159) use the correct rom and flash again.
I am attempting to flash 3.16.401.8 onto hboot 1.16 (relocked) i am s-off and i changed my cid to HTC__001 via fastboot.
Is there another way. or can i flash the zip in twrp or cwm? Again i just want an oem jelly bean with the proper hboot and radio and everything that the OTA would change. so i can be up to date before i move on to the JB roms.
Ive tried all of the custom ones, and the wifi cuts in and out. i used the wifi partition fix. and i flashed the latest radio. nothing helped for more than a few hours.
don't know what to say; normally you can flash whatever rom you want without problems;
guess 99% of users here did it.
however I can not understand what do you want to be full stock? warranty problems?
ultimul said:
don't know what to say; normally you can flash whatever rom you want without problems;
guess 99% of users here did it.
however I can not understand what do you want to be full stock? warranty problems?
Click to expand...
Click to collapse
Yah thats usually how it works for me. if it works for 99% of people with one step. ill have to do it manually with 20 steps. I guess its made me learn alot about adb and fastboot. I could never get adb to work untill i upgraded to windows 7 recently. until then i had to exract everything to my sdcard via terminal emulator and then drag it to my computer form the card and modify things. but ive been forced to learn quite a bit.
Its weird. I bought my phone off of craigslist from someone who had no idea how to root. But when i opened it into hboot it said Tampered and locked. with no signs of ever being unlocked. completely stock rom and no red warning text on the splash screen.
The reason i want to be stock it so i know all the correct partitions and everything are set up right. (that part i dont understand yet).
I know that a normal system wipe in twrp or cwm doesnt wipe everything. If i wipe and install the same rom i am using(just to clear it up and start over) it doesnt even wipe the app data. (at least on my phone)
Im thinking that its because i am installing a euro rom with a HTC__001 cid and mine was originally TMUS T-MOB010 .
one thing i noticed also is that windows could not verify either of the ruus i downloaded from shppied roms
How do i flash the ruu.zip that i downloaded? Do i need to rename it update.zip like the older phones? Its been a while.
Ok so i know im pretty much helping myself here but i hate when i come across threads with no conclusion.
I was able to succesfully update with the t-mob 2.35 ruu .exe thats on shipped roms .com so i know its not a problem with my computer.
still on hboot1.14 (thought i was on 1.16).
I changed my cid back to t-mob010.
Im just not sure why i cant update with the htc__001 with the 3.16 update.
Any help would be appreciated.
Ahh, things go on here! Nice! :laugh:
It's not quite clear if the RUU is the right one on this phone as many people report problems... So let's go OTA.
To flash the 3.16 OTA update your hboot needs to be < 2.15, your recovery needs to be the HTC stock one , your device needs to be relocked (not totally shure as mine wasn't at that time and it worked, but please remember that) and you need to have HTC stock system/ and stock data/ (ICS) files on your phone (you'll have to unroot as well, if rootet), as the OTA seems to check if certain files are present before working.
All that is quite a pain in the ass, isn't it?! So do one the following:
- Just make shure your bootloader version is lower 2.15, else flash a lower one.
- Click here and you'll have access to one of my google drive folders.
- Download the 2.31 zip. Unpack and copy these nandroid backup files into the appropriate TWRP folder on your phone, reboot into recovery and restore. Once done, you'll be able to flash the 3.16 OTA update after reboot. Remember to change CID before if you're on 11111111.
- Or download the 3.16 zip, unpack and restore. You'll have stock htc sense JB without the OTA. You don't even need to downgrade your bootloader in case. CID doesn't matter here.
- To root simply download SU_Bbox file and flash in recovery.
Important: With the JB update HTC invented disk write protection by default. This simply means that files deleted within stock sense JB will be back after rebooting the phone, also root was granted and working (still grats to htc for this one!!!). Check out for elemental x kernel at this point, as flar2 is the one offering additional modules for the stock kernel working around this. So you can be on stock JB as close as possible with write protection disabled.
--- edit ---
I nearly forgot: If you're experiencing WiFi troubles afterwards search for flashing wifi partitions.
--- and one more ---
myphonesbetter said:
I was able to succesfully update with the t-mob 2.35 ruu .exe thats on shipped roms .com so i know its not a problem with my computer.
still on hboot1.14 (thought i was on 1.16).
I changed my cid back to t-mob010.
Im just not sure why i cant update with the htc__001 with the 3.16 update.
Click to expand...
Click to collapse
Cause you're on 2.35 US. You need to be on 2.31 EU before, because 3.16 is EU and there is still no JB update to 2.35 US. 3.16 OTA will work with htc__001 (htc worldwide).
The OTA determined my OS was modified.
I could not restore the folder i took directly out of the zip.
There was a folder inside the folder that contained the same files. I was able to flash this.
My hboot is still at 1.14 my cid is not htc--001 relocked. the update was 650 mb of which i could not use wifi for becauese it just said error.
so 650 mb through tmobile. only took a few minutes but used almoast half of my months dl limit.
IDK. i found instructions on how to update the hboot in best sense roms thread. i will try that.
Edit: the restore for 3.16 worked in twrp. shouldve tried that first.
I may still update my hboot. I cant really find any instructions. Apparently the search just finds every thread and lists it.
If you are on the latest TWRP 2.4.3.0 go back to 2.4.1.0 (the latest one seems to have restore problems).
The folder contained in the zip needs to be copied to /TWRP/BACKUPS/HT23whatever/
You should be able to restore then.
--- edit
hehe, ok then.
You can flash any of these hboots from within TWRP. Up or down, it doesn't matter - you're s-off.
---------- Post added at 10:43 AM ---------- Previous post was at 10:32 AM ----------
CID should be HTC__001 not htc--001. Maybe a typo.
Bonjour everyone, here's a little guide on how to unbrand your phone in order to get the OTA updates notifications directly and be able to install them.
If you want to get S-OFF one day on your One SV, read this first. You need to change CID to SuperCID to do so, and it's not possible (for the moment) if you upgrade to JB
Basically this works as long as your phone model is sold unbranded somewhere in the world and that the people having such a phone got an OTA update.
For now, ther's no way to change CID if you're running JB and are S-ON. That means that this only work for One SV's running ICS who want to get the OTA updates.
As far as I know, it works on K2_U and K2_UL, since they both got an OTA update to JB.
The trick is simple, I didn't invent it and haven't been able to find its original founder, but thanks a lot to her or him !
I'm basically just a messenger here since I only tried out some stuff that worked with other phones, so thanks a lot to bkcokota, old.splatterhand and jmztaylor
Don't try it if you're worried, bricks happen, you'd be the only one responsible !
Here we go :
1. First you need to root your phone, here's how.
2. Change you CID using the same method than for the One S.
Personnaly, I changed it to "HTC__203", which is the CID unbranded HTC phones have in France (HTC-FRA).
For example, "HTC__001" is HTC-WWE, which stands for World Wide English.
You can change it to whatever CID you like : choose it well. I can only recommend to use HTC__203 since it's the only one I tried and that it worked, but do as you please !
3. Flash stock recovery back. You'll find it here or here. Flash it like you flashed CWM recovery (into fastboot, using fastboot flash recovery xxxxxx.img).
4. Relock your bootloader. It's possible that it's not necessary, but it can't hurt ("fastboot oem lock", when in fastboot usb)
5. Run a RUU that matches you unbranded CID to get an "unbranded" rom.
You'll find them here, for example. The "RUU_K2_UL_ICS_40_HTC_Europe_1.17.401.5_R....exe" one will work with HTC__203 and HTC__001 CIDs.
6. Go ask your phone if he can find any updates
WARNING : for the moment there's no way to change CID if you upgrade to JB since the newer HBOOT (v2.00) don't let you do it. That means that for now you won't be able to S-OFF if you upgrate to JB using this method. For now...
Nice one!
Only thing i would add for people to know:
if somebody want to get S-Off, they should change the CID to SuperCID 11111111 (or if you want 22222222,...).
old.splatterhand said:
Nice one!
Only thing i would add for people to know:
if somebody want to get S-Off, they should change the CID to SuperCID 11111111 (or if you want 22222222,...).
Click to expand...
Click to collapse
Done, sir.
It was only said at the bottom of the message at first, but now I put it at the beginning as well.
There's one thing that I'm trying to get though : according to a lot of people and forums, you don't get OTA when you have SuperCID... but some poeple say they do.
It probably changes depending on the type of HTC phone, but also depending on the OTA (some got the first ones, but not the latest...).
I got the ota notification with SuperCID, i think it depends on more things.
But there i'm not far enough into it.
I have had no success at all. My story:
Updated a branded phone to JB, rooted. Then I did a moonshine S-off and changed CID to HTC__001 (even tried 11111111).
I have downloaded a ICS RUU (couldn't find stock K2_UL so I thought that I would download ICS first and then do OTA to JB) but I am getting error 158. I have checked md5 sum and it matches (http://androidfiles.org/ruu/getdown...0.14_2_10.49.40.11L_release_301902_signed.exe). Any ideas?
If you're on jb and hboot 2.00, that's normal... and written in the first post.
There is information that it is impossible to change CID while on JB and with 2.0 hboot, but I guess that I have had success in changing to superCID (at least this is what I can read in bootloader and using fastboot oem readcid command.
So, as far as I understand newer hboot won't let me use older RUU as well, right?
Is there any chance to make this for the k2cl ( boost mobile ) version?
idr666 said:
Is there any chance to make this for the k2cl ( boost mobile ) version?
Click to expand...
Click to collapse
Can you be more specific, what you mean with "this".
old.splatterhand said:
Can you be more specific, what you mean with "this".
Click to expand...
Click to collapse
Sorry, I was wondering if there is a way to update this phone ( the k2cl ) to JB
idr666 said:
Sorry, I was wondering if there is a way to update this phone ( the k2cl ) to JB
Click to expand...
Click to collapse
Boost has no official jb, but i know that there is work for an custom jb rom for boost.
Oh, thank you for the info. Is there any link about this work in progress?
idr666 said:
Oh, thank you for the info. Is there any link about this work in progress?
Click to expand...
Click to collapse
Look here
szympro said:
There is information that it is impossible to change CID while on JB and with 2.0 hboot, but I guess that I have had success in changing to superCID (at least this is what I can read in bootloader and using fastboot oem readcid command.
So, as far as I understand newer hboot won't let me use older RUU as well, right?
Click to expand...
Click to collapse
old.splatterhand, you seem to know this and that about One SV. No chance for older RUU, right? I can't seem to find a clean WWE JB OTA update. I just want a clean, stock, not modified ROM from HTC and I thought RUU is the only way to go :crying: Any advices?
szympro said:
There is information that it is impossible to change CID while on JB and with 2.0 hboot,...
Click to expand...
Click to collapse
This was before moonshine was available. With S-Off i think it should be possible.
So, as far as I understand newer hboot won't let me use older RUU as well, right?
Click to expand...
Click to collapse
I think so.
szympro said:
old.splatterhand, you seem to know this and that about One SV. No chance for older RUU, right? I can't seem to find a clean WWE JB OTA update. I just want a clean, stock, not modified ROM from HTC and I thought RUU is the only way to go :crying: Any advices?
Click to expand...
Click to collapse
To get it a bit clearer.
At this point i'm not very up to date, thats why i didn't answer til now.
I think (but i'm not sure) you can flash the ruu, if you are on hboot 1.0.
And as you are S-Off you should be able to downgrade hboot. But this is a very risky point, you can easily brick your device. Here is, how you have to do:
rollon76 said:
To change hboot you will need a PL80IMG.zip on sdcard with android-info.txt and hboot.img inside it.
reboot to bootloader and flash.
Click to expand...
Click to collapse
The thing what makes it difficult, is to get the hboot.img (its inside ics ruu), cause the htc ruu's encrypted and i only have heard about tools for linux which can decrypt it.
Thanks to your reply I did some research and I have managed to do what I wanted. I have downgraded hboot first (by extracting and encrypting ICS RUU using linux), then I could run RUU and now I am stock ICS with S-off and superCID
Should I post some files from RUU? 1.0 hboot or stock recovery? You guys need something?
Thanks for your helping hand old.splatterhand!
szympro said:
Thanks to your reply I did some research and I have managed to do what I wanted. I have downgraded hboot first (by extracting and encrypting ICS RUU using linux), then I could run RUU and now I am stock ICS with S-off and superCID
Should I post some files from RUU? 1.0 hboot or stock recovery? You guys need something?
Thanks for your helping hand old.splatterhand!
Click to expand...
Click to collapse
Glad, it worked for you.
Yes, of course, everything is appreciated! You can use this thread, please post ruu name too. You can look at my posts there. Hboot, boot.img, recovery, radio, would be fine.
HERE have other ruu
https://www.dropbox.com/sh/1t2zswod7tc97az/5hbzEgTv80
szympro said:
I have downgraded hboot first (by extracting and encrypting ICS RUU using linux)
Click to expand...
Click to collapse
Wow, that's cool !
Did you use rollon's method and flashed PL80IMG.zip in bootloader mode ?
If yes, which android-info.txt did you use ?
If not, how did you do it ?
szympro said:
then I could run RUU and now I am stock ICS with S-off and superCID
Click to expand...
Click to collapse
Even cooler for you.
Did you get the ota update notification for JB then ?
Did you manage to apply it ?
Thanks and congratulations !
Hi everyone.
Just a quick message to confirm that rollon's method works.
To downgrade you need to be S-OFF, extract and decrypt (with ruuveal, using linux or a linux virtualbox runned in windows) hboot and androidinfo from ICS RUU, put them in a zip named PL80IMG.zip, put it on your sd card and boot into bootloader. Then you can run the ICS RUU normally and you'll be back to stock ICS, with a "*** LOCKED ***" bootloader (not relocked !), will be able to go back to S-ON using "fastboot oem writesecureflag 3" (thanks to JMZ)...
You'll then have a locked S-ON out of box phone running 100% stock ICS with original boot, recovery and all that... who'll get the 2 JB OTA's...
In case anyone's interested
Hey All,
Apologies if this is obvious but I couldn't figure it out myself looking at the FAQ's etc.
I just purchased a new HTC One A9 which was carrier unlocked by AT&T, and I want to convert from the RUU version they use (1.27.502.5) to the latest version that HTC has released on their website - 2.18.617.10 .
However, when I go to do this using that RUU, I get signature error 132. My phone is bootloader locked and S-ON, but from reading a little, I thought that shouldn't matter because I have a US phone, and you only need to change the CID/MID stuff (whatever those are) if you're in a different region?
How would I go about doing this? From reading through a bunch of posts, do I first need to switch to an unlocked version of Marshmallow, before then upgrading to Nougat?
Edit: Upon further reading, does the fact that the 502 in my current version does not match 617 in the one I wish to upgrade to mean that I can't do this with S-on? Do I need S-off? If so, how do I do that? Is it only by purchasing sunshine?
Thank you for your time!
Best,
-BBsmitz
bbsmitz said:
Hey All,
Apologies if this is obvious but I couldn't figure it out myself looking at the FAQ's etc.
I just purchased a new HTC One A9 which was carrier unlocked by AT&T, and I want to convert from the RUU version they use (1.27.502.5) to the latest version that HTC has released on their website - 2.18.617.10 .
However, when I go to do this using that RUU, I get signature error 132. My phone is bootloader locked and S-ON, but from reading a little, I thought that shouldn't matter because I have a US phone, and you only need to change the CID/MID stuff (whatever those are) if you're in a different region?
How would I go about doing this? From reading through a bunch of posts, do I first need to switch to an unlocked version of Marshmallow, before then upgrading to Nougat?
Edit: Upon further reading, does the fact that the 502 in my current version does not match 617 in the one I wish to upgrade to mean that I can't do this with S-on? Do I need S-off? If so, how do I do that? Is it only by purchasing sunshine?
Thank you for your time!
Best,
-BBsmitz
Click to expand...
Click to collapse
In order to convert to another carrier version, you must change your CID and MID to match the RUU version you want to flash. .617 uses the same MID as .502 so you'll need to change your CID only from CWS__001 to BS_US001. Changing CID does requires S-OFF (Sunshine is the best way unless you know someone with a XTC2Clip box).
You'll also need to update your firmware to Nougat before flashing the Nougat RUU because of the signature change implemented in Nougat.
Everything explained here:
https://forum.xda-developers.com/showpost.php?p=63640734&postcount=2
Read faq 1-2-3-4
alray said:
In order to convert to another carrier version, you must change your CID and MID to match the RUU version you want to flash. .617 uses the same MID as .502 so you'll need to change your CID only from CWS__001 to BS_US001. Changing CID does requires S-OFF (Sunshine is the best way unless you know someone with a XTC2Clip box).
You'll also need to update your firmware to Nougat before flashing the Nougat RUU because of the signature change implemented in Nougat.
Everything explained here:
https://forum.xda-developers.com/showpost.php?p=63640734&postcount=2
Read faq 1-2-3-4
Click to expand...
Click to collapse
Okay thanks so much Two more quick questions.
1) Does changing to S-off have any consequences in terms of a future update? I'm guessing it will void my warranty, but say I wanted to go back to using AT&T's version of android. Would the fact that my phone is now S-off prevent me from using their RUU (assuming I change the CID back.) I guess my question is, warranty aside, is there really any negative to turning S-off?
2) This is more out of curiosity. HTC One Phones that were sold unlocked/developer that are currently running Marshmallow can be upgraded to Nougat without flashing the firmware to 2.xx.xxx.x right? So if I was to change my current CID to that of a developer One A9, and install that Marshamallow RUU say (1.57.617.60), why wouldn't I be able to simply update from within the OS as they do?
Thanks again for your time.
Best,
Bbsmitz
bbsmitz said:
Okay thanks so much Two more quick questions.
1) Does changing to S-off have any consequences in terms of a future update?
Click to expand...
Click to collapse
No, after converting to another version, you'll receive ota updates for that version.
I'm guessing it will void my warranty,
Click to expand...
Click to collapse
Yes an no. There's always the possibility to revert back to your original version and hide everything you've done.
but say I wanted to go back to using AT&T's version of android. Would the fact that my phone is now S-off prevent me from using their RUU (assuming I change the CID back
Click to expand...
Click to collapse
You would simply have to revert your CID back to CWS__001 and flash the at&t ruu. Changing the cid is easily done.
I guess my question is, warranty aside, is there really any negative to turning S-off?
Click to expand...
Click to collapse
S-off gives you full control and access to all partitions which mean there is no more mechanism preventing you to flash incompatible software/firmware on your phone. Once s-off, be sure to understand what you're doing before flashing files. The risk is limited if you'll only be converting to another version or flashing custom roms but if you're going to explore a little deeper yeah it can be dangerous.
2) This is more out of curiosity. HTC One Phones that were sold unlocked/developer that are currently running Marshmallow can be upgraded to Nougat without flashing the firmware to 2.xx.xxx.x right? So if I was to change my current CID to that of a developer One A9, and install that Marshamallow RUU say (1.57.617.60), why wouldn't I be able to simply update from within the OS as they do?
Click to expand...
Click to collapse
All A9 can simply be updated from the OS, not only the unlocked/dev version. The reason why you need to flash the firmware first before flashing a RUU is that HTC changed their encryption signature in Nougat. That mean your phone need the new decryption key to be able to flash Nougat RUU. Flashing the firmware first will update your phone with the new key, making it able to flash Nougat RUU.
There is a firmware.zip file inside ota updates. When you install an ota update from the OS, the first thing that is flashed on your phone is that firmware.zip. So no you don't need to manually flash the firmware because it's done automatically in the ota process.
Yes you could flash the 1.57.617.30 ruu and do the ota update after. It's just faster to flash the Nougat firmware first and the Nougat RUU instead of flashing the Marshmallow RUU and downloading + installing 2 ota udpates, well that's my opinion. Both methods will give the same result.
alray said:
No, after converting to another version, you'll receive ota updates for that version.
Yes an no. There's always the possibility to revert back to your original version and hide everything you've done.
You would simply have to revert your CID back to CWS__001 and flash the at&t ruu. Changing the cid is easily done.
S-off gives you full control and access to all partitions which mean there is no more mechanism preventing you to flash incompatible software/firmware on your phone. Once s-off, be sure to understand what you're doing before flashing files. The risk is limited if you'll only be converting to another version or flashing custom roms but if you're going to explore a little deeper yeah it can be dangerous.
All A9 can simply be updated from the OS, not only the unlocked/dev version. The reason why you need to flash the firmware first before flashing a RUU is that HTC changed their encryption signature in Nougat. That mean your phone need the new decryption key to be able to flash Nougat RUU. Flashing the firmware first will update your phone with the new key, making it able to flash Nougat RUU.
There is a firmware.zip file inside ota updates. When you install an ota update from the OS, the first thing that is flashed on your phone is that firmware.zip. So no you don't need to manually flash the firmware because it's done automatically in the ota process.
Yes you could flash the 1.57.617.30 ruu and do the ota update after. It's just faster to flash the Nougat firmware first and the Nougat RUU instead of flashing the Marshmallow RUU and downloading + installing 2 ota udpates, well that's my opinion. Both methods will give the same result.
Click to expand...
Click to collapse
Edit2: I figured out the problem. I had to boot into the bootloader and then run
Code:
htc_fastboot oem rebootRUU
before I could run the RUU sucessfully. Am leaving the rest of this post up just so that other people googling this have a touch point.
Okay so I've used Sunshine to turn s-off and unlock my bootloader. I then changed my CID to BS_US001.
I then tried to install the HTC version of Marshmallow (maybe silly, but heard people having issues with Nougat and the battery) using the RUU.exe file. It started successfully, but then halfway though, after it had transferred the ROM over, it threw an ERROR155 and aborted, leaving my phone with an empty progress bar, and that circular green arrow icon in the middle. I used the command line to restart my device and had to factory wipe it, but otherwise not the worse for wear.
I tried googling it; do I need to relock my bootloader for the RUU.exe files to work? I think the Sunshine FAQ recommended against doing that. Is this a risky step?
Edit: Here are some instructions I found from the HTC One M8 firmware flashing thread. My error says "unknown" but I imagine its similar.
For “Error 155 relock bootloader" do:
- Since my thread works only with S-OFF phones anyway, this error can be read as: you need to S-OFF first!
- Error 155 can mean that you need SuperCID. On a few occasions this was shown when the RUU/FUU refused to run because of a wrong region lock.
- Lately, Error 155 has occurred when a FUU was launched from within android. When encountering a FUU error 155 with the process stalling after the rebootRUU (stuck at black screen with silver HTC logo), please just restart the FUU and leave the phone in that mode, or reboot the phone, then reboot to bootloader, then do “htc_fastboot oem rebootRUU” and then launch the FUU again (thanks @anarchychris for pointing it out).
- run the fastboot command “htc_fastboot oem lock" - only applies to S-ON phones that want to update the firmware with a stock OTA package (not offered on this thread!!). Stock OTA files sometimes need a locked bootloader.
Click to expand...
Click to collapse
help
Is this guide convert AT&T bindings factory unlocked htc? I cant access wifi hotspot. also cant run RRU.
hiii i have htc one a9300 by mistak i wipe every thing including internal memory now my fon sows that no "os install are you sure wanto reboot " please tell me wat to do now
AT&T conversion
alray said:
In order to convert to another carrier version, you must change your CID and MID to match the RUU version you want to flash. .617 uses the same MID as .502 so you'll need to change your CID only from CWS__001 to BS_US001. Changing CID does requires S-OFF (Sunshine is the best way unless you know someone with a XTC2Clip box).
You'll also need to update your firmware to Nougat before flashing the Nougat RUU because of the signature change implemented in Nougat.
Everything explained here:
https://forum.xda-developers.com/showpost.php?p=63640734&postcount=2
Read faq 1-2-3-4
Click to expand...
Click to collapse
How do I get started to do this. How do I find out my mid Cid and if I need to change? How do I flash firmware first? I have android 6.0 software 1.27.502.5. I have done a run before but never changed from a carrier. I went to the link above but I don't know what some if this means and where to start and what steps to take in order.