Related
- DISCLAIMER -
Code:
This Is For Educational Purposes Only
You Shall Not Use This On Other People Phones Without Permission Under Any Circumstances
I'm Not Responsible For Any Eventual Errors And Misbehaving Of Your Devices
Files And Tutorials Are Used And Partially Created According My Expirience And Also Collected From Internet & XDA Forums
All Regards Are Going To Their Authors
If Just Google Ask you For Password (Credentials) - You Can Turn On WIFI Via ADB In Order To Google Accept Your Device Via this Command:
Code:
adb shell svc wifi enable
Click to expand...
Click to collapse
Requirements:
The Device Needs To Have Usb Debugging Enabled
In Case Usb Debugging Isn't Enabled And You Have Recovery,you Can Run The Same Instructions From Recovery
For Some Methods Root Is Not Required (Though It Will Be Better If Device Is Rooted)
If None Of This Methods Works For You - Unfortunally You Probably Must Full Wipe Your Device
METHOD I
Solution For Everyone With Recovery (Cwm, Twrp, Xrec,Etc...) Installed:
INSTRUCTIONS:
1. Download this zip Pattern Password Disable (Download from attachments) on to your sdcard (using your PC, as you cant get into your phone, right )
2. Insert the sdcard into your phone
3. Reboot into recovery mode
4. Flash the zip
5. Reboot
6. Done!
Note : If You See The Gesture Pattern Grid Or Password After Restarting, Don't Worry. Just Try Any Random Pattern Or Password And it Should Unlock.
METHOD 2
Solution For Everyone Without Recovery Installed - ADB :
What You Need:
=>A computer running a Linux distro or Windows+Cygwin
=>USB cable to connect your phone to the PC
=>Adb installed
How to install adb:
1. Open Terminal
2. Type:
Code:
sudo apt-get install android-tools-adb
Hit [Enter]
3. Follow the instructions until everything is installed.
INSTRUCTIONS:
1. Connect you (turned on) Phone to the Computer via USB.
2. Open a terminal window.
3. Type:
Code:
adb devices
adb shell
cd data/system
su
rm *.key
4. Done...Now You Just Have To Reboot.
Note : If You See The Gesture Pattern Grid Or Password After Restarting, Don't Worry. Just Try Any Random Pattern Or Password And it Should Unlock.
METHOD 3
Solution For Everyone Before Lock Accident :
SMS Bypass - Download Link - Install It On Your Device (Download from attachments)
This App Allows You To Remotely Bypass Your Phone's Screen Lock By Sending A SMS.
It Removes Your Gesture Pattern Or Password After Receiving A Preset Keyword Along With A Secret Code Via SMS.
SMS Bypass App Requires Root.
INSTRUCTIONS:
1.First, make sure you give permanent root access to the app.
2.Change the secret code to your preferred choice. The default password is : 1234
3.To reset your screen lock, send the following message from another phone:
Code:
secret_code reset
Example:
Code:
1234 reset
Note 1 : There is a space between your secret code and reset. Also the secret code is case sensitive.
Note 2 : There is an option available to change the preset keyword. Default is : reset - Your phone will restart and your lock screen will be reset.
Note 3 : If You See The Gesture Pattern Grid Or Password After Restarting, Don't Worry. Just Try Any Random Pattern Or Password And it Should Unlock.
METHOD 4
Solution For Everyone Via Adb - SQL Command :
INSTRUCTIONS:
=>Type This Commands Separated In Your Terminal (CMD Prompt) :
Code:
adb shell
cd /data/data/com.android.providers.settings/databases
sqlite3 settings.db
update system set value=0 where name='lock_pattern_autolock';
update system set value=0 where name='lockscreen.lockedoutpermanently';
.quit
=>Now You Just Have To Reboot.
Note : If You See The Gesture Pattern Grid Or Password After Restarting, Don't Worry. Just Try Any Random Pattern Or Password And it Should Unlock.
METHOD 5
Solution For Everyone Via Adb - File Removal :
INSTRUCTIONS:
=>Type This Command In Your Terminal (CMD Prompt) :
Code:
adb shell rm /data/system/gesture.key
Note : If You See The Gesture Pattern Grid Or Password After Restarting, Don't Worry. Just Try Any Random Pattern Or Password And it Should Unlock.
METHOD 6
Solution For Everyone With USB Debugging Enabled :
INSTRUCTIONS:
Primary Step for all method:
Download & Extract to anywhere - Bypass Security Hack (Download from attachments)
Open SQLite Database Browser 2.0.exe in SQLite Database Browser.
Run pull settings.db.cmd inside By-pass security Hacks folder to pull out the setting file out of your phone.
Drag settings.db and drop to SQLite Database Browser 2.0.exe program.
Navigate to Browse data tab, At table there, click to list down the selection & selete secure
Instruction To Remove Pattern Lock:
Now, find lock_pattern_autolock, Delete Record
Close & save database
Run push settings.db.cmd and reboot your phone
Instruction To Remove PIN Lock:
Now, Find Or Create lockscreen.password_type, double-click & change it's value to 65536, Apply changes!
Now, find lock_pattern_autolock, Delete Record, If doesn't exist, Ignore
Close & save database
Run push settings.db.cmd and reboot your phone
Instruction To Remove Password Lock:
Now, find lockscreen.password_salt, Delete Record
Now, find lockscreen.password_type, Delete Record
Close & save database
Run push settings.db.cmd and reboot your phone
Note : If You See The Gesture Pattern Grid Or Password After Restarting, Don't Worry. Just Try Any Random Pattern Or Password And it Should Unlock.
METHOD 7
Solution For Everyone With Recovery Installed :
INSTRUCTIONS:
1.Download and Copy Aroma File manager.zip (Download from attachments or http://forum.xda-developers.com/showthread.php?t=1646108) to your memory card.
2. Open your recovery (press volume Down + Power button or it can be different according to the phones. Generally the phones who have press able button on the middle they have to press all three buttons. Google for you pattern there are lots)
3. There’ll b an option in recovery called “mount”. Go in that option and then mount all the cache and everything it is there.
4. Then select “update” and select “apply update from SD/external” and select aroma file manger.zip file that you downloaded using above QR code above.
5. After Flashing or updating, the aroma file manger will open. Use volume keys for up/down and power button 2 select like you use to get into recovery.
6. In aroma File manager , Go to menu , which is located in bottom strip and then select Settings.
7. Go to bottom n select “mount all partition in startup ” then exit from aroma file manger.
8. Now after exit , re-update that aroma file again and it will open again.
9. Go to data >> and then System.
Then find ‘gesture.key’ (for pattern lock) and ’password.key’ (for password lock) then long touch on gesture.key or password.key and sum option will be prompted , choose delete and delete that file and restart.
Note : If You See The Gesture Pattern Grid Or Password After Restarting, Don't Worry. Just Try Any Random Pattern Or Password And it Should Unlock.
Credits:
PHP:
iamareebjamal(http://forum.xda-developers.com/member.php?u=4782403)
amarullz(http://forum.xda-developers.com/member.php?u=402300)
me myself (@piraterex) :D (http://forum.xda-developers.com/member.php?u=5002224)
I don't know all Devs so pls PM me and ask for credits for their tools/app
I LOVE YOU sooooooooo much
Super sharing Dear Big Thanks.. :thumbup:
Sent from my GT-I9300 using Tapatalk 2
Nice. Method 2 worked on my S2 plus
a million thanks my FRIEND:victory::victory::victory::victory::victory::victory::victory::angel:
you saved my day :good::good:
I LOVE YOU :laugh::laugh::laugh:
I AM SO HAPPY
me1mon said:
I LOVE YOU sooooooooo much
Click to expand...
Click to collapse
cheetah81 said:
Super sharing Dear Big Thanks.. :thumbup:
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Gibz97 said:
Nice. Method 2 worked on my S2 plus
Click to expand...
Click to collapse
Mohdsultan said:
a million thanks my FRIEND:victory::victory::victory::victory::victory::victory::victory::angel:
you saved my day :good::good:
I LOVE YOU :laugh::laugh::laugh:
I AM SO HAPPY
Click to expand...
Click to collapse
thanx guyz..
Thank you very much, you saved me from factory resetting my device.
Sent from my Nexus 5 using Tapatalk
I believe this thread deserves more, it's help is so valuable.
Sent from my LG-P500 using XDA Free mobile app
Worked great.. did the Aroma method because I already had that installed... just a note. at&t Galaxy S4 4.4.2 mine was sparepassword.key and there was not password.key and I was using a password.
tnx dude
is there any way to bypass email verification???
if not...can you make it ...??
Note 3. 1,4,5 and 6 didnt work. Kept getting settings.db permission denied error.
Method 7 didnt work either. all I could see was gesture.key, deleted it but it ddint get rid of my pin lock.
piraterex said:
METHOD 7
Solution For Everyone With Recovery Installed :
INSTRUCTIONS:
1.Download and Copy Aroma File manager.zip (Download from attachments) to your memory card.
Click to expand...
Click to collapse
Thank you, thank you, thank you! You saved my day! :laugh::laugh:
This worked BUT: The aromafilemanager.zip didn't work, I had to download it from here: http://forum.xda-developers.com/showthread.php?t=1646108
So, please update the link, with the zip linked above it worked perfectly! :good:
//edit: And there is one more very simple way, if you have activated the device manager as device administrator (for some odd reason my phone deactivated all device admins, that's why I locked myself out in the first way, I use TimePIN and suddenly my code and the failsafe didn't work ) :
Go to https://www.google.com/android/devicemanager klick on "lock" and enter some pin like 1234, the current lockscreen will be overwritten by the 1234-lock.
Here's a simple windows app I made that will do all that with just one click over ADB http://youtu.be/NxzGxb73CQE
CM11 file to delete
this guide is cool
those who using CM11 the file to be deleted is cm.gesturekey
and the pattern is delted
i m using CM11
so just wanted to share
Thank you so much!
My Galaxy S2 slipped from my hand and battery popped out. After turning the device on, the phone would not accept my PIN! Strange as it seems.
Tried method 6 initially, but did not work. However went for Method 7 and profit!
I had TWRP recovery already in place, so didn't actually had to use the aroma file manager.
Thank you so much again. Weird days!
k.janku1 said:
Here's a simple windows app I made that will do all that with just one click over ADB http://youtu.be/NxzGxb73CQE
Click to expand...
Click to collapse
where is download link of tools?
i locked my phone with password lock..
I want to try option one
I have a ATT galaxy note 3 using Knoxraid v5.6 jb rom .. when i go into recovery it doesnt give me an option to select file from storage
only options to upgrade from ADB
upgrade from Storage
wipe cache
Any idea?
Ma$etas said:
i locked my phone with password lock..
I want to try option one
I have a ATT galaxy note 3 using Knoxraid v5.6 jb rom .. when i go into recovery it doesnt give me an option to select file from storage
only options to upgrade from ADB
upgrade from Storage
wipe cache
Any idea?
Click to expand...
Click to collapse
Try the option "upgrade from storage"
Normally it's called install zip from sd card. If it's not working, change the recovery.
simmac said:
Thank you, thank you, thank you! You saved my day! :laugh::laugh:
This worked BUT: The aromafilemanager.zip didn't work, I had to download it from here: http://forum.xda-developers.com/showthread.php?t=1646108
So, please update the link, with the zip linked above it worked perfectly! :good:
//edit: And there is one more very simple way, if you have activated the device manager as device administrator (for some odd reason my phone deactivated all device admins, that's why I locked myself out in the first way, I use TimePIN and suddenly my code and the failsafe didn't work ) :
Go to https://www.google.com/android/devicemanager klick on "lock" and enter some pin like 1234, the current lockscreen will be overwritten by the 1234-lock.
Click to expand...
Click to collapse
thanx buddy...I have added that link :good::angel:
what one will do if he has stock recovery with usb debugging disabled and has forgotten lock screen pattern or pin ? Is there anyway to enable usb debugging in fastboot or stock recovery or any other way?
Yesterday i sent an email to huawei asking for the bootloader codes to my huawei g6-l11 and today they reply that they dont have the codes for this phone. Looked deeper into google and find out that dc unlocker already supports reading bootloader codes for this phone instantly
Here are the steps:
1. Download the last DC Unlocker Software
2. Install ADB drivers or Hisuite ( search forum )
3. Enable Manufacturer Mode, This is done by entering in dial pad code *#*#2846579#*#*, select "Project Menu", "Background settings", "USB ports settings", "Manufacturer mode".
4. Connect Phone to usb and open DC UNLOCKER
5. Open DC UNLOCKER and select Huawei Phones in manufacturer and leave the model Auto detect
6. Click on the magnifing glass and wait for detection
7. Voilá, the bootloader code appears in the BOX
8. Download Unlock Huawei Device GUI ( I cant leave links here but google is you friend )
9. Put the code generated by DC UNLOCKER in The field and click unlock
10. TADAAAAAAAA Unlocked Instantly
Remember, you can use this method to get the unlock code and you can use other methods to unlock the boot loader, just search the forum :good:
Not working for me:
DC - Unlocker 2 Client 1.00.1201
Detecting modem :
selection :
manufacturer - Huawei modems
model - Auto detect (recommended)
Found Applications port COM5
Found Diagnostics port COM4
Found USB interface {3F966BD9-FA04-4EC5-991C-D326973B5128}
Found modem : HUAWEI G6-L11
IMEI : 864037024395912
Firmware : 8226C00B109
SIM Lock status : unknown(read failed)
modem not found !
Click to expand...
Click to collapse
Diogo Glória said:
Yesterday i sent an email to huawei asking for the bootloader codes to my huawei g6-l11 and today they reply that they dont have the codes for this phone. Looked deeper into google and find out that dc unlocker already supports reading bootloader codes for this phone instantly
Here are the steps:
1. Download the last DC Unlocker Software
2. Install ADB drivers or Hisuite ( search forum )
3. Enable Manufacturer Mode, This is done by entering in dial pad code *#*#2846579#*#*, select "Project Menu", "Background settings", "USB ports settings", "Manufacturer mode".
4. Connect Phone to usb and open DC UNLOCKER
5. Open DC UNLOCKER and select Huawei Phones in manufacturer and leave the model Auto detect
6. Click on the magnifing glass and wait for detection
7. Voilá, the bootloader code appears in the BOX
8. Download Unlock Huawei Device GUI ( I cant leave links here but google is you friend )
9. Put the code generated by DC UNLOCKER in The field and click unlock
10. TADAAAAAAAA Unlocked Instantly
Remember, you can use this method to get the unlock code and you can use other methods to unlock the boot loader, just search the forum :good:
Click to expand...
Click to collapse
What phone model do you have???? Dont work in L11 LTE ...
I have the l11 4G LTE
Dont foget to enable manufacturer mode, it is necessary for qualcom phones
and make sure that you have the correct drivers
bugggmenot said:
Not working for me:
Click to expand...
Click to collapse
That is because you have modem in the field, you must select HUAWEI PHONE and not HUAWEI MODEM, hope it helps
Hi! I have the drivers, I try with debug mode on and off, I change the connection in engineering menu like you say, try all the usb types and nothing....
persona78 said:
Hi! I have the drivers, I try with debug mode on and off, I change the connection in engineering menu like you say, try all the usb types and nothing....
Click to expand...
Click to collapse
What error dc unlocker shows?
Thanks!!
Diogo Glória said:
What error dc unlocker shows?
Click to expand...
Click to collapse
no device.
but i think i need to reboot the phone when i choose Manufacturer mode, i dont try yet....
Do you have done any reboots?
Diogo Glória said:
Yesterday i sent an email to huawei asking for the bootloader codes to my huawei g6-l11 and today they reply that they dont have the codes for this phone. Looked deeper into google and find out that dc unlocker already supports reading bootloader codes for this phone instantly
Here are the steps:
1. Download the last DC Unlocker Software
2. Install ADB drivers or Hisuite ( search forum )
3. Enable Manufacturer Mode, This is done by entering in dial pad code *#*#2846579#*#*, select "Project Menu", "Background settings", "USB ports settings", "Manufacturer mode".
4. Connect Phone to usb and open DC UNLOCKER
5. Open DC UNLOCKER and select Huawei Phones in manufacturer and leave the model Auto detect
6. Click on the magnifing glass and wait for detection
7. Voilá, the bootloader code appears in the BOX
8. Download Unlock Huawei Device GUI ( I cant leave links here but google is you friend )
9. Put the code generated by DC UNLOCKER in The field and click unlock
10. TADAAAAAAAA Unlocked Instantly
Remember, you can use this method to get the unlock code and you can use other methods to unlock the boot loader, just search the forum :good:
Click to expand...
Click to collapse
When i open DC unlocker the Ports Section is always blank any solution?
Tutorial in next post works.
#HuaweiBootloaderUnlock
Hi! To Unlock the bootloader, first try this site, but if you don´t have you need to create a account ( free ):
https://emui.huawei.com/en/plugin.php?id=unlock&mod=detail
Insert your data like this example for U10:
http://postimg.org/image/6kddvoboj/
U10-G6, huawei G6-U10, etc..., DON´T WORK! Insert it like image shows.
Example for L11 model:
http://postimg.org/image/wha6ixm85/
Be sure from the data you are inserting...
If the Huawei site don´t work than try the next tutorial...
About the DC - Unlocker client and how to get the bootloader code.
It WORKS and i found how it works.
Here are the steps:
1. Need a internet connection and don´t use a proxy server, download DC-Unlocker but only this version works, install it and reboot :
https://mega.nz/#!ykxjiRia!ppWG22acgv35N5j1VMTsZlKMi0i0JQB9v8BVn5l98WI
DC-unlocker-client-software-V1_00_1201
2. Turn ON debug mode
Go to Settings -> About phone -> Press several times Build number it will say "you are a developer now" -> go back and open Developer options ->Turn ON USB debugging -> DONE
3. Install ADB drivers with Hisuite ( best way ):
http://consumer.huawei.com/minisite/HiSuite_en/
The first time HiSuite try to connect with the phone, in the screen phone it will pop up a Windows requesting permissions for the connection with PC, MUST GIVE IT!
4.With the phone >>>> UNPLUGED<<<<:
Enable USB Manufacturer Mode in phone:
In dial pad type code *#*#2846579#*#*
select "Project Menu"
"Background settings"
"USB ports settings"
"Manufacturer mode"
"CORFIRME"
5. Connect the Phone to usb, check if PC is installing the phone, wait to finish to install it. It will pop up a window in phone to choose connection, DON´T DO ANY THING, let it be like it is, in charge mode.
6. Execute, OPEN DC- UNLOCKER FOLDER A EXECUTE THE EXE FILE WITH ADMINISTRATIVE PRIVILEGES, DC UNLOCKER and Select Huawei Phones in manufacturer and leave the model in Auto detect
7. Click on the magnifing glass and wait for detection. Ignore any advise that you are using a old version of dc-unlocker, in new version to use this option you need to pay.
8. You will see the bootloader code appears in the BOX bellow.
9. Use this software and the unlock bootloader option, 18 option:
https://mega.nz/#!WgoVWLjQ
Key:
!YV1JLOGvXX4rvYreDXP1Twwh-V5O65NjmMxBH_7unUI
Read this- BOOTLOADER Unlocking-Relocking Procedure:
https://www.facebook.com/download/1560613864260023/BOOTLOADER Unlocking-Relocking Procedure.docx
If still don´t work, go here:
https://www.facebook.com/groups/huawei.g6.development/permalink/457458214413436/
Hi, thanks for this tutorial. I have followed these steps:
persona78 said:
Hi!
This is how i made it:
Here are the steps:
1. Download DC-Unlocker but only this version works, install it and reboot :
2. Turn ON debug mode
Go to Settings -> About phone -> Press several times Build number it will say "you are a developer now" -> go back and open Developer options ->Turn ON USB debugging -> DONE
3. Install ADB drivers with Hisuite ( best way ):
The first time HiSuite try to connect with the phone, in the screen phone it will pop up a Windows requesting permissions for the connection with PC, MUST GIVE IT!
4. It need to enable USB Manufacturer Mode in phone:
In dial pad type code *#*#2846579#*#*
select "Project Menu"
"Background settings"
"USB ports settings"
"Manufacturer mode" (IF OPEN THE MENU TO CHOOSE THE USB CONNECTION PRESS RETURN TO GO BACK TO CONFIRME)
"CORFIRME"
And Reboot the phone,.
5. Connect Phone to usb (MY DEBUG MODE WAS ON AND USB FLASH DRIVE WAS SELECTED) and open DC UNLOCKER.
6. Select Huawei Phones in manufacturer and leave the model Auto detect
7. Click on the magnifing glass and wait for detection
8. You will see the bootloader code appears in the BOX bellow.
Click to expand...
Click to collapse
In step 8, I get some information about my phone but the bootloader code is not there. All the information I get is the following:
selection :
manufacturer - Huawei phones
model - Auto detect (recommended)
Found Applications port COM5
Found Diagnostics port COM7
Found Phone : HUAWEIG6-L11
Model : Huawei Qualcomm Android phone
IMEI : XXXXXXXXXXXXXXX
Serial NR. : T7L7N1XXXXXXXXXX
Firmware : MSM8226C00B119_AMSS Sep 15 201410:04:11
Hardware ver. : HL1G6L22M
Wi-Fi MAC : XX:XX:XX:XX:XX:XX
BlueTooth MAC : XX:XX:XX:XX:XX:XX
SIM Lock status : unlocked
I suppose that the bootloader unlock code should be there but it is not. Is it possible that this method doesn't work for my phone? Or have I done something wrong?
Thanks for your help.
jjjuuann said:
Hi, thanks for this tutorial. I have followed these steps:
In step 8, I get some information about my phone but the bootloader code is not there. All the information I get is the following:
selection :
manufacturer - Huawei phones
model - Auto detect (recommended)
Found Applications port COM5
Found Diagnostics port COM7
Found Phone : HUAWEIG6-L11
Model : Huawei Qualcomm Android phone
IMEI : XXXXXXXXXXXXXXX
Serial NR. : T7L7N1XXXXXXXXXX
Firmware : MSM8226C00B119_AMSS Sep 15 201410:04:11
Hardware ver. : HL1G6L22M
Wi-Fi MAC : XX:XX:XX:XX:XX:XX
BlueTooth MAC : XX:XX:XX:XX:XX:XX
SIM Lock status : unlocked
I suppose that the bootloader unlock code should be there but it is not. Is it possible that this method doesn't work for my phone? Or have I done something wrong?
Thanks for your help.
Click to expand...
Click to collapse
Your DC-Unlocker is this version V1_00_1201????? Only this one shows the code, the new versions dont!
The link i post is for V1_00_1201 version, the only one that works on G6!
-----
F...k the download link for that version is not there any more.... I think i have it, i will upload and post it!
--------------
This is the right version
https://mega.nz/#!ykxjiRia!ppWG22acgv35N5j1VMTsZlKMi0i0JQB9v8BVn5l98WI
DC-unlocker-client-software-V1_00_1201
persona78 said:
Your DC-Unlocker is this version V1_00_1201????? Only this one shows the code, the new versions dont!
The link i post is for V1_00_1201 version, the only one that works on G6!
-----
F...k the download link for that version is not there any more.... I think i have it, i will upload and post it!
--------------
This is the right version
DC-unlocker-client-software-V1_00_1201
Click to expand...
Click to collapse
As you said, the problem was the version of DC-Unlocker (I was trying with version 1.00.1214).
I finally got my bootloader code with version 1.00.1201
Thank you very much for your help!!!
The new versions have that option to but need to activate the paid version... to many downloads made a opportunity for the creator, I think.
WOW finally it worked!! Tnx persona :X
notice that after installing HiSuit and ADB drivers, you need to recheck "Manufacturer mode" again. that was the part that took a lot of time for me to realize. even no restart needed!!
I had "Debug mode" on , Mass Storage and used DC Unlocker V1_00_1201 .
it seems DC Unlocker gets BL code frome a server, so make sure your anti virus allows DC Unlocker to connect.
Hi personna78
It doesn't work with my device.
I use dc-unlocker v1.00.1201
I use debug mode and usb flash drive
I use manufacturer mode
I get this answer:
Found phone : huawei g6-l11
IMEI : xxxx xxxx
Firmware : g6-l11v100r001c900b370
Device may be in wrote mode
Can you help me ?
sleo38 said:
Hi personna78
It doesn't work with my device.
I use dc-unlocker v1.00.1201
I use debug mode and usb flash drive
I use manufacturer mode
I get this answer:
Found phone : huawei g6-l11
IMEI : xxxx xxxx
Firmware : g6-l11v100r001c900b370
Device may be in wrote mode
Can you help me ?
Click to expand...
Click to collapse
Hmmmm, when you change to manufacture mode, confirm and don't reboot try dc unlocker than.
persona78 said:
Hmmmm, when you change to manufacture mode, confirm and don't reboot try dc unlocker than.
Click to expand...
Click to collapse
Hi personna78
OK, it is work non. Thank a lot
This is to show you how to get Google Play on the Huawei Enjoy 5, which standard Chinese Stock ROM does not have Play store enabled.
Note: when unlocking the phone and installing custom recovery, it might mean that the OTA updates don't work anymore.
Since we have not yet had an update since I installed this, I could not check, but this is what is said in the Huawei unlock site...
Credits: my sincere thanks to andrik22, who guided me through the whole process...
Prerequisites:
Huawei Enjoy 5 phone (TIT-AL00)
Huawei Unlock tool (attached)
ADB drivers (attached)
ADB / Fastboot software (attached)
CWM Recovery file (attached)
GAPPS Pico for ARM64, Android 5.1 --> Download from Opengapps.org
Steps to complete:
1. Install ADB Drivers
2. Unzip ADB software in C:\adb
3. Unzip CWM_Recovery.img in C:\adb
4. Copy the GAPPS file into C:\adb
C:\adb should look like this now:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. Now got to the phone and write down:
Settings -->about phone --> Status--> IMEI 1 + Serial Number
6. Connect phone by USB to computer
7. Enable USB debugging on phone --> slide down the notification area and touch "USB connection options", then on the bottom of the screen enable "USB Debugging"
7a. Copy the GAPPS file from C:\adb to the root of the external SD card on your phone
8. Unzip and open the Unlock tool (you might need to disable the virus checker, as this will be flagged and deleted, at least this was the case with me) --> fill in IMEI 1, get Product ID, write that down.
9. Go to the Huawei site to get your unlock code (log in with Facebook, or Huawei ID, fill in the required information product type = Smartphone, product ID = TIT-AL00, serial number from the phone, IMEI code, Product ID). Your unlock code will be below in Red)
10. Startup command prompt (Windows key + R, type cmd, enter)
11. In command prompt, type "cd \adb" to get to the adb directory
12. In command prompt check if device is recognized (typing "adb devices" in the command prompt should show you this)
13. Now reboot the phone into fastboot by typing "adb reboot bootloader"
14. This should reboot the phone into fastboot mode (black screen, only showing "fastboot>" on the bottom
15. In the command prompt, type "fastboot devices" to see if the device is recognized.
Your screen should look something like this:
The next command will unlock your phone AND make a hard reset... if any data or settings would need to be preserved, please make a backup!
16. Now type in the command prompt:"fastboot oem unlock XXXXX" where XXXX is the unlock code you got from the website
17. Then type in command prompt: "fastboot reboot". After this, your phone will reboot and reset.
18. When Phone is rebooted, make sure USB debugging is on again (same as point 7)
19. Now reboot the phone into fastboot by typing "adb reboot bootloader"
20. This should reboot the phone into fastboot mode (black screen, only showing "fastboot>" on the bottom
21. In the command prompt, type "fastboot devices" to see if the device is recognized.
22. Now we are going to flash CWM Recovery: type in command prompt: "fastboot flash recovery CWM_recovery.img"
23. reboot into recovery by typeing into command prompt: " "fastboot reboot" while holding VOL+ on the phone.
24. When the options screen on the phone appears, press VOL- to select the recovery mode. This will boot into CWM recovery.
25. In CWM recovery, select "install ZIP" and select "From Memory card" and select the Open Gapps file we have copied there in step 7a.
26 When flashing is done, type into the command prompt: "adb reboot" to reboot the phone.
This should reboot the phone. first 5 minutes it might be very slow as it is optimizing (Google) apps, but then Google Play store should be working on your phone!
Attention!
When installing SuperSU you can NOT get ROOT!!!
You will receive a cyclic reboot. And for the restoration of the phone need flash original recovery, and then install the firmware version B128 from the official site (update.zip).
Links for firmware version B128:
TWRP recovery
Original Recovery
Official page TIT-AL00
Firmware version C00B128 from the official site and mirror. Size: 1,2 Gb (The Chinese have made a mistake, inside the archive file located in the upgrade "dlaod" - is wrong, the folder should be called dload.)
Firmware version C00B132 from the official site and mirror. Size: 1,2 Gb
Firmware version C00B135 from the official site and mirror. Size: 1,2 Gb
Firmware from the official site installed only from original recovery, so if you have installed CWM recovery, you must first restore the original as it is written above, and already from it to make a clean install.
Can't open the Huawei Unlock tool...
Thanks for the guide but there's a crucial step that seems not to work: the "Huawei Unlocker.zip" tool only contains an adb.exe, fastboot.exe, and a few non-Windows-executable files (busybox and 2 .dll's) so how do we execute this tool?
gordonnorth said:
8. Unzip and open the Unlock tool (you might need to disable the virus checker, as this will be flagged and deleted, at least this was the case with me) --> fill in IMEI 1, get Product ID, write that down
Click to expand...
Click to collapse
=> How to "open the Unlock tool"? It seems to be missing from the .zip file... could you re-upload somehow?
Thanks again!
tomvanbraeckel said:
Thanks for the guide but there's a crucial step that seems not to work: the "Huawei Unlocker.zip" tool only contains an adb.exe, fastboot.exe, and a few non-Windows-executable files (busybox and 2 .dll's) so how do we execute this tool?
=> How to "open the Unlock tool"? It seems to be missing from the .zip file... could you re-upload somehow?
Thanks again!
Click to expand...
Click to collapse
Hi!
I see that I attached the wrong file here. have corrected in the meantime.
Please try the unlocker tool that is attached now.
gordonnorth said:
Hi!
I see that I attached the wrong file here. have corrected in the meantime.
Please try the unlocker tool that is attached now.
Click to expand...
Click to collapse
It worked perfectly now. Google Apps are installed. Thanks a lot, guys!
One more gotcha: the Huawei Unlocker.exe didn't work for me when executed directly from the .zip file, even though it's only one file so I expected that to work... Perhaps it self-extracts... Anyway, you need to unpack the .zip file first and then execute the unlocker .exe
; said:
when I flash the gapps.zip from sdcard.
cwm told me the signature verification faild...
maybe I should try another gapps?
Click to expand...
Click to collapse
; said:
I tried 5 gapps blow but none of them works...
Click to expand...
Click to collapse
Found the problem. and finnaly it works.
The first time of the CWM installation failed. ( but adb told me OK).
so I just flash CWM again to solve the problem.
Many thanks.
so many chinese user also wanna to use gapps, even the Gov. banned google services here.
Hope there's a way to root the device , to delete those useless pre-installed apps.
Thanks again.
different huawei emuı page
hi my friends,
there is a problem about huawei emui page
I check the your advice but When I want to appliacaiton this step, I see different page in web site
and than I can not submit this step I don't take unlock code.
what is the problem pls help me !!
thanks
petere15 said:
hi my friends,
there is a problem about huawei emui page
I check the your advice but When I want to appliacaiton this step, I see different page in web site
and than I can not submit this step I don't take unlock code.
what is the problem pls help me !!
thanks
Click to expand...
Click to collapse
Hi petere15,
did you go to this website? it still seems fine to me?
https://emui.huawei.com/en/plugin.php?id=unlock&mod=detail
The same model TIT-AL00 announced to India with the name of Honor Holly 2 Plus.
Review
This means that you can install the firmware, which has services Googe.
andrik22 said:
The same model TIT-AL00 announced to India with the name of Honor Holly 2 Plus.
Review
This means that you can install the firmware, which has services Googe.
Click to expand...
Click to collapse
Hey Andrik,
do you know where we can download that firmware?
and did you test that already? might be good to have a more westernized ROM available, so also the EMUI badges might work for whatsapp for example...
gordonnorth said:
Hey Andrik,
do you know where we can download that firmware?
and did you test that already? might be good to have a more westernized ROM available, so also the EMUI badges might work for whatsapp for example...
Click to expand...
Click to collapse
Today just announced!
On sale from 15 February. I think the firmware will be closer to the date of sale.
Firmware appear on this page.
The same phone will be sold in Europe, called Huawei Y6 Pro.
http://www.notebookcheck.com/Huawei...er-unteren-Mittelklasse-geleakt.156905.0.html
http://www.allmobilearea.com/huawei-y6-pro/
User guide in English and Mirror.
hi,
im not expert for phones so i need little help. Problem begine on geting unlock key.
My Huawei page look diferent , don't have product type.
Cant paste link coz im new here: h t t p://imgur.com/nGkL3R1.
Any idea what to do next?
in product model i try to write" huawei tit-al00", only "tit-al 00" and i get the same message.
Sorry on my bad english, hope someone will understand my problem.
thx
GONF said:
hi,
im not expert for phones so i need little help. Problem begine on geting unlock key.
My Huawei page look diferent , don't have product type.
Cant paste link coz im new here: h t t p://imgur.com/nGkL3R1.
Any idea what to do next?
in product model i try to write" huawei tit-al00", only "tit-al 00" and i get the same message.
Sorry on my bad english, hope someone will understand my problem.
thx
Click to expand...
Click to collapse
Manufacturer again changed the method of obtaining the unlock code.
You need to go to the phone account Huawei. For example, Huawei club, HiApp or Huawei Cloud+.
The report said that you did not go to these applications for more than 14 days.
The second option - for unlock to write their e-mail data (down - contact us).
thx for answering, first solution didnt work, so i sent mail, hope i will get some positive answer.
Hmm, still no answer from huawei tehnical support.
Anyone have some expirience with them?
Or, is ther any other solution for my problem?
pls anyone.... girl will cut my ..... if i don fix her mobile
GONF said:
Hmm, still no answer from huawei tehnical support.
Anyone have some expirience with them?
Or, is ther any other solution for my problem?
pls anyone.... girl will cut my ..... if i don fix her mobile
Click to expand...
Click to collapse
Unfortunately, there is only a version of the installation software VPN, included in the service with Huawei phone with the expectation of 14 days.
I have not tested it should work in theory.
Perhaps you can write in support of Huawei in your country - that they may request an unlock code from colleagues in China.
Hi, I still have not solved my problem, so I have one question.
Will it be possible in the near future root this device?
Or i can trow it in the trash.
GONF said:
Hi, I still have not solved my problem, so I have one question.
Will it be possible in the near future root this device?
Or i can trow it in the trash.
Click to expand...
Click to collapse
Even if it will be able to get root, too, need to unlock the bootloader on it.
You have tried to write an e-mail?
Send an email to [email protected] Email them the following. They usually email you back and tell you to do go online to unlock your bootloader and it should work on the website, or never email you back:
Hello. I keep getting an error when trying to unlock my phone on the unlock page.
Model: TIT-AL00 (Or whatever model you have)
Serial: Put in your phones serial number here. (You get this in About phone, Status)
IMEI: Put in your phones IMEI number here. (You get this in About phone, Status, it's IMEI1)
Product ID: (Go into your phone dialer and dial *#*#1357946#*#* and it will give you your Product ID, or use Huawei Unlocker)
Here's Instructions i made this solution i think it work for all android phones !
1. Enable Developer options and check "OEM Unlocking" (tap 8 times build number in phone info)
2. Go to GOOGLE PLAY STORE, search for DisableService App after that install it
3. Open This APP then go to tab SYSTEM
4. Search for Google Play Services
5. Search for Frp Uncheck Frp Service !
5A. Allow Root Access!
5B. Uncheck FrpUpdateIntentService
6. Now You Have FRP Disabled (YOU CAN'T HAVE ADDED GOOGLE ACCOUNT WHILE DISABLING, THIS INCREASE CHANCE OF BRICKING DEVICE!)
7.After it, you cannot add google account via settings it will say Application "name" Has stopped
8.Download QuickShortCutMaker
9.Search for "Manager"
10.Open IT
11. Search For Enter Email and Password or something
11A. IMPORTANT DON'T SELECT SECOND, THERE'S 2 OPTIONS MAKE SURE YOU HAVE SELECTED 1 ONE
12. Open ... Tab then select Login Using Browser or something
13. Write email address then password, Wait for logging in Window will close and you will go back to quickshortcutmaker
FINISHED ! Your Phone is now FRP Unlocked With Google Account ! You can check FRP Lock Status with google account in DownloadMode , Enjoy Your Custom Roms etc
No more Custom Binary Blocked By FRP Lock
you can have custom recovery with google account, IMPORTANT: don't delete your google account ! if you delete you need to go back to 8. section !, have fun -Tested On My SM-G531F Samsung Galaxy Grand Prime lollipop 6.1.1 Rooted Unlocked Now FRP Unlocked-- Tested 5 times! Warning:You need to do same if you install Custom OS !
NOTES ! READ IT !
You Need Rooted Device!
You don't need Check USB Debugging
You don't need custom recovery !
i haven't seen anywhere way to disable FRP Lock with google account (after uninstall app disableservice frp will re-enable make sure you installed it to \system\app If you not you can't have custom OS !)
-------------------------------------------------------
PRESS THANKS BUTTON IF MY SOLUTION WORK
root access??
I get caught up at number 5. I get a pop-up saying "failed to gain root access"
what do I do ??
Hi
I will show how to disable FRP Lock on any Samsung device for Root/No-Root user
For No-Root user:
Go to Settings/About phone&Tablet/Build number
Tap on 5 times or 10 times
Then,return on home Settings
Go to Developper options
Enable OEM unlocking
If it don't work you will try on root
For root, download root file for your device and flash it with Odin
For Root user :
Download "DisableService" on Google Play Store
Then, allow root access and go to the section "System"
Scroll down and tap on Google Play Service
Then scroll down again and when you see "FrpService" click and wait
Enjoy
Sorry for my bad English i've 13 years old
??