Hey Everybody,
I finally made a TWRP Recovery for Intex Aqua Star 2 HD and i know many of you want to install custom recovery like twrp,cwm etc but its not available on internet so i made one for my phone and i wanna share it with you guys to flash this you can use FLASHIFY APP if you have root access or you can replace this with stock recovery while flashing stock firmware you can download it from here soon i'll be sharing the method of flashing it till then try it on your own!
TWRP RECOVERY V2.8.5.0
FLASHIFY
Drivers
Flash Tool
1.Flash Recovery With Flashify!(Root Method)
https://image.ibb.co/emkAF6/Giver_Root_Access.png/[IMG]
Give Root Access!
[IMG]https://image.ibb.co/d10z8R/Select_Recovery_Image.png
Select Recovery Image
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Choose recovery.img
Flash IT!
Flashing Recovery!
Boot into recovery from here or just turn off your phone then press power button and volume up and release power button as you see boot logo and keep holding volume up and in a moment you"ll see TWRP logo and you"ll be in Recovery!
2.Replace Recovery In Flash Tool
Download your device firmware from internet it must be in .pac format
Download This Flash Tool For Here
Open Your Firmware In Flash Tool
Wait till your Firmware loads!
Go to the location where your flash tool was, there you'll find ImageFiles folder
Rename the TWRP recovery same as the name of your stock recovery in ImageFiles Folder usually recovery.img
And Then Replace The Stock Recoery With TWRP recovery!
And Now Flash Your Firmware, and remember for flashing your firmware you need to have all the drivers installed it could be of your phones chipset and of your phone i 've provided driver for Intex Aqua Star 2 HD and this for all the spreadtrum devices
WAY FOR ENTERING RECOVERY MODE
1.Use any App Like Rom Manager
2. Turn Off your phone and press powe+voloume up button and release only power button as you see the boot logo and keep holding volume up key and in a moment you'll see the TWRP Logo and Congrats you are in Recovery MODE!
ENJOY!
Great job bro....but I have a newer version of twrp(3.0.2) in my thread..
Link: https://forum.xda-developers.com/android/development/custom-rom-intex-aqua-star-2-hd-sc7731-t3684471
Related
Root your android with unlocked bootloader via stock recovery easily.
Working from eclair to jellybean.
HOW TO:-
1.)Download file BELOW.
2.)Place update.zip in / folder (main folder) of your Internel Sd card.
3.)Switch off phone and boot in Recovery (you should know how to).
[Power on + volume up +volume down for micromax canvas phones.]
4.)Choose option to
Apply update.zip from sdcard.
To change options, press volume up and down.
To select any option, press power buttons .
5.)Let it complete.
A yellow line will appear and thean a message will come "Installation complete"
DOWNLOADS:-
How to unroot:-
1.)Download this file and place in sdcard.
2.)Flash via recovery like you rooted.
Flash recovery in mediatek devices
How to flash recovery on mediatek devices:-
1.)Download the Recovery meant for your device.
2.)Rename it to recovery.img(or whatever) and transfer it to your sdcard.
3.)Download MobileUncle MTK Tools from play store.
4.)Select the option "Recovery Update" from the app, and then when it ask for path, guide it to where you transferred the file to your sdcard.
5.)Your phone will reboot into recovery. Congrats.
6.)You can boot into the recovery at any time by switching off your mobile, and then pressing and holding volume down, volume up and power button till the screen lights up. From there you will have the option to go the the recovery mode.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OR
Credits= http://www.droidiser.com/2012/11/clockworkmod-port-micromax-a110-how-to.html
r32222222
2222222222222222
How to use boot in recovery mode?
There is no zip file for download?
Shambumon555 said:
How to use boot in recovery mode?
There is no zip file for download?
Click to expand...
Click to collapse
I guess you need to flash a CWM / TWRP recovery using SP Flash tool.
Correct me if i am wrong.
Shambumon555 said:
How to use boot in recovery mode?
There is no zip file for download?
Click to expand...
Click to collapse
Check again, its there to download. btw, use power button+volume up+volume down
eagledipesh said:
I guess you need to flash a CWM / TWRP recovery using SP Flash tool.
Correct me if i am wrong.
Click to expand...
Click to collapse
method given in post no.2 can also be used.
Please help me to root Intex Aqua Wonder2 ....
Sent from my Spice Mi-425 using xda app-developers app
I have made ClockWorkMod Recovery with help of MTK Droid Tool.
ClockworkMod Recovery for Karbonn Ta-Fone A37 MT6577 Download
Installation :-
0.Root you A37 with Framaroot
1.Download the CWM recovery ^^^ and put in Sdcard [any internal or Ext.]
2.Download Mobileuncle MTK Tools and Install.
3.In app go to Update Recovery.
4.Select Recovery Img.
5.Update it .It will take some time.
6.After it will Automatically boot in Recovery or In app go to Reboot recovery.
7.Done !!! Enjoy!!! Happy Flashing!!!
Credits :-
ThunderSky7 for porting.
SBL777 aka Sharad for his TA-Fone A37.
rua1 for MTK Droid Tool.
Screenshots :-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you like my work then press thanks button.
I tried to install this on my Ta-Fone A37 HD and when i booted into the recovery mod... all I could see was white lines and and overall glitchy look of a bricked recovery. This IMG has bricked my reocvery. The device is working fine though. Could you please upload the stock recovery for the tab?
D4mR said:
I tried to install this on my Ta-Fone A37 HD and when i booted into the recovery mod... all I could see was white lines and and overall glitchy look of a bricked recovery. This IMG has bricked my reocvery. The device is working fine though. Could you please upload the stock recovery for the tab?
Click to expand...
Click to collapse
1. CWM recovery img is working fine.
2. You can try flashing Recovery via Flashify or other img flashing softwares.
3. If then also It's not working for you then make CWM by using MTKdroid tool here" {It's Really Easy.:good:}
4. And here's the Stock Recovery for A37-HD
ThunderSky7 said:
1. CWM recovery img is working fine.
2. You can try flashing Recovery via Flashify or other img flashing softwares.
3. If then also It's not working for you then make CWM by using MTKdroid tool here" {It's Really Easy.:good:}
4. And here's the Stock Recovery for A37-HD
Click to expand...
Click to collapse
Thanks!:good:
*********************Root and twrp For Leagoo Z5*****************
So Guys This the Guide To install twrp Recovery and Root Your Leagoo Z5,
i Don't own any Leagoo Z5 Device, i just Share this Tutorial With you,
Instructions-
twrp Installation-
Download sp tools, twrp, supersu, vcom Driver from Below
install correct vcom Driver on PC
Run Sp Flash Tools, Load MT67XX Scatter from Recovery Folder
Uncheck Everything and then Check Recovery only
under Recovery Section Load Downloaded twrp.img
then click on Download
as soon as connect your Switched of phone to your pc via usb and wait for success, after complete, follow Below Instructions To Root,
Rooting Instructions-
1) first, Download the SuperSu zip file from Below.
2) Now save the SuperSu zip file to your phone.
3) Boot your device into Recovery mode (TWRP) by pressing ‘Volume UP + Power‘ button.
4) In TWRP Recovery navigate to Install Zip and select ‘SuperSu.zip’ to Root Your Device
5) Swipe to install SuperSu and reboot your device.
How to install Xposed framework-
"Search Suitable version for Your Device on forums"
Downloads-
mod edit - link removed
SP TOOLS, twrp, vcom Driver, and supersu[/URL]
Screen Shorts-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/FONT]
doesn't work at all. installed the twrp with no errors, rebooted in recovery mode, and the nothing happens, it only reboots again to normal mode.
Your download links to a ton of different files. some of which are randomly named, i havent a clue which ones to download.
masterx1234 said:
Your download links to a ton of different files. some of which are randomly named, i havent a clue which ones to download.
Click to expand...
Click to collapse
twrp, Superuser and SP flash tools,
I dont have recovery mode when i enter recovery mode it just says no instruction. How can i fix that?
Team Win Recovery Project MICROMAX KNIGHT 2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WHAT IS TWRP?
Oh come on, you know what it is - don't try to fool me!
In case you're serious, though...
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
HOW TO INSTALL
U need a Rooted Device to install this recovery..
Download Recovery From here http://www.mediafire.com/file/05e9vcaf776ljd3/sd.img
1. Boot your Device in fastboot mode and connect to PC.
2. Using fastboot boot sd.img command temporarily boot into twrp.
3. flash this SU zip file https://download.chainfire.eu/969/Su...0630161323.zip
4. Your Device is now rooted. Boot the device.
5. Copy The recovery in your phone.
6. Download flashify and open it. It will ask you for root permission, give it that so flashify can do it's process.
7. Select recovery option and find your sd.img from your explorer.
8. Now just flash it and wait till a dialogue box appears with REBOOT option.
9. Now just reboot your device in twrp recovery and enjoy.
CREDITS..
OFFICIAL TWRP TEAM
Suraj_B for porting it.
Raush for a lot of help
Nikhil( ME ) For writing the thread..
Write below if u have any Query
Don't forget to hit like button
Reserved
Hii Bro small Help pls create micromax q4001 twrp recovery file
Pls bro create this file
Suresh8428 said:
Hii Bro small Help pls create micromax q4001 twrp recovery file
Pls bro create this file
Click to expand...
Click to collapse
Ok i will try, expect to see it if i can make it, for now, the best thing to do is dm me on xda and tele
Download CYANOGENMOD android 4.4.2 for Karbonn a16 custrom rom
Hello friends.
i was working on karbonn a16 device and got success to port cyanogenmod android 4.4.2.
so whats working in it.
#Almost everything....
what not working
#video recoder.
Dual sim support,
wifi
hotspot
bluetooth
radio,
gps,
inbuilt Opera
viper sound fx booster
ROOTED
Boot Logo changed
Boot animation changed
theme
inbuilt xender
inbuilt Flashify
if you found any other bug then please comment below for more support.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirment : -
1) device must be rooted.
2) custom recovery like cwm should be installed (Click here to know how to install CWM in Karbonn a16) or if you want to flash cwm recovery with whole cyanogen then use #method2
3) battery must be charge upto 50%
How to Flash this Custrom ROM
you can flash this ROM with 2 styles...
when your phone is not bricked then use below method
otherwise use #method 2
Download Frimware zip file ---> Download
place this zip file into internal or external SDcard.
make a full wipe/factory reset \
wipe delvik cache
install zip
reboot
Enjoy!
#method 2
This method is usefull when you device is bricked and you want to install cyanogen insted of stock rom
you can also use it to port cwm recovery to your device
download whole caynogenmod form below links
Download Part 1
DOwnload part 2
Download Part 3
place all rar files in single folder
install any unrar or winrar tool to extract this folder.
Right click on "KarbonnA16_cyanogen_a2zandroid.part1.rar" and choose extract here.
now you will get 2 folders and one instruction file.
now open sp flash tool and click on scatter load tab and choose scatter file from downloaded frimware folder
now click on download tab in flash tool
now pull out the battery from your karbonn a16
now press volume up button and connect to computer via usb cable.
flashing will start
done
enjoy
Thanks for CynogenMod!
Will surely try it and your MarioOS rom ?
Will this support to downgrade a device of samsung galaxy note 3 neo sm-n7505
Please reply