Can i root my China phone with android 2.2 (Froyo)?
I want to root it and install some Light ROMS..
Its very laggy and slow like turtle.
If anyone can help me please do. Thanks
If no can i install Android Revolution HD? (I've done it for my DHD tho) lol.
What kind of phone is it?
Its a random china phone with 4.3 Inch touch screen and 512MB of ram.
Coolahmed said:
Its a random china phone with 4.3 Inch touch screen and 512MB of ram.
Click to expand...
Click to collapse
That's not exactly very descriptive. It has to have some more identification than that.
Imagine saying this to us, "I have a random car, can't tell you much about it, but can I easily install a Chevy Corvette engine in it?"
For all we know, the "car" in my metaphor is an AMC Gremlin, lol.
chinese phone
Same problem with my Vodafone/Touch T9199.. upgraded to the latest rom through the system itself but i just simply cant root.. when i use fastboot it stays "waiting for device" even though i installed the drivers and turn on usb debugging.. all info on the phone by Z-Device Test attached
Thanks a lot
Anything new on rooting Chinese T9199C phones? Mine has Android 2.3.5 and tried Gingerbreak but no luck.
Coolahmed said:
Can i root my China phone with android 2.2 (Froyo)?
I want to root it and install some Light ROMS..
Its very laggy and slow like turtle.
If anyone can help me please do. Thanks
If no can i install Android Revolution HD? (I've done it for my DHD tho) lol.
Click to expand...
Click to collapse
On the device...
-tick/on usb debugging
open up cmd prompt,
-enter path to adb.exe files...
-type "adb.exe logcat", don't press enter yet
-reboot the device and wait until screen is black
-Press enter on your pc
-copy all logcat and post it here ^^
CKKnot said:
On the device...
-tick/on usb debugging
open up cmd prompt,
-enter path to adb.exe files...
-type "adb.exe logcat", don't press enter yet
-reboot the device and wait until screen is black
-Press enter on your pc
-copy all logcat and post it here ^^
Click to expand...
Click to collapse
I have android froyo 2.2.2.
Model number is de88plus by ivio mobil.
CDMA baseband M7627-E2_V2.22
GSM says unknown(but it works on both cdma and gsm)
kernel ver [email protected] #2
Build FRG83G
I tried to check it it was recognized by adb but when I type adb devices it doesnt list any devices with the phone attached. Hence when I go for logcats it just says waiting for devices.
How can i upgrade/port a new ROM to my chinese phone?
Hi
i bought a Chinese Note 2 look alike phone.
android version: 4.1.1
Baseband: MAUI.11AMD.w12........
kernel: 3.4.0 [email protected]
build e1901....
CPU quad core 1.2 ghz
5.5" display
i want to change the OS and to port or upgrade to cyanogenMOD
please help me to root it and upgrade.
thanks
how to Root the phone galaxy note II I9220
good afternoon
I'm new here and would like to Root my phone, but not which program to use
he and a replica of galasy II Replica note.
can someone help me?
please
this configuration and it
C5b
I PAD 9220
Model: A520
android 4.0.3
kernel 2.6.32.9
the version number 20120926
sarjeyll said:
Hi
i bought a Chinese Note 2 look alike phone.
android version: 4.1.1
Baseband: MAUI.11AMD.w12........
kernel: 3.4.0 [email protected]
build e1901....
CPU quad core 1.2 ghz
5.5" display
i want to change the OS and to port or upgrade to cyanogenMOD
please help me to root it and upgrade.
thanks
Click to expand...
Click to collapse
Hi All,
I have a Nokia Lumia 820 Developer device with a buggy and old firmware installed, here are the details:
Model: NOKIA id101
Carrier: Developper v3
Software: Windows Phone 8
RAM: 851
Screen resolution: 480:800
OS version: 8.0.9827.70
Firmware revision number: 1232.12.1235.5
Because this firmware is buggy I would like to update to a new firmware. For this I have installed the Nokia Care Suite and run the Nokia Product Support Tool 5.0 to get more device information, here it is:
Type Designator: RM-825
Model Name: Nokia Lumia XXX
Product Code: 059P710
Software Version: 1232.12.1235.5
Using this information I have downloaded the latest firmware from Nokia servers using NaviFirm+ 1.7. The only problem was that I couldn't find a firmware that matches my Product Code: 059P710.
The good news is that I have found another Nokia Lumia 820 Developer Device firmware version 1232.2110.1244.3002 but the Product Code is different than mine, it's 059R4L7.
Now, in order to install this new firmware I have followed these 2 steps:
1)Renamed the files from the firmware directory c:\ProgramData\Nokia\Packages\Products\RM-825\ by replaceing the new product code 059R4L7 with the code that my phone has 059P710.
2)Opened Nokia Product Support Tool 5.0 and begin the Refurbish procedure, this procedure will replace my old firmware 1232.12.1235.5 with the new firmware 1232.2110.1244.3002.
Things seem to work, my phone is restarted and moved to Flash Mode but then I get this error:
Refurbish Failed
Signed FFU programing operation has failed with error code: 1313819477
See the attached image: Lumia820_Refurbish_Error.png
Can someone please help?
Is there another way to put a new firmware on my phone?
Please help!!!
Thanks,
Mircea
I have to use Recovery for changing firmware with difer Product Code. Refurbish is only to able flash the firmware with same PC.
I have tried Recovery also but I still get an error:
Recovery Failed
Unable to get error message
See attached image: Lumia820_Recovery_Error.jpg
I think that Windows Phone 8 has secured the firmware update process and is now checking the Product Code just before it starts the firmware install.
Can you please help?
Did you change your firmware with one that has a diferent Product Code? If so, did you change it on a Windows Phone 8 device?
Please help!
Thanks
mirceadeliu said:
Hi All,
I have a Nokia Lumia 820 Developer device with a buggy and old firmware installed, here are the details:
Model: NOKIA id101
Carrier: Developper v3
Software: Windows Phone 8
RAM: 851
Screen resolution: 480:800
OS version: 8.0.9827.70
Firmware revision number: 1232.12.1235.5
Because this firmware is buggy I would like to update to a new firmware. For this I have installed the Nokia Care Suite and run the Nokia Product Support Tool 5.0 to get more device information, here it is:
Type Designator: RM-825
Model Name: Nokia Lumia XXX
Product Code: 059P710
Software Version: 1232.12.1235.5
Using this information I have downloaded the latest firmware from Nokia servers using NaviFirm+ 1.7. The only problem was that I couldn't find a firmware that matches my Product Code: 059P710.
The good news is that I have found another Nokia Lumia 820 Developer Device firmware version 1232.2110.1244.3002 but the Product Code is different than mine, it's 059R4L7.
Now, in order to install this new firmware I have followed these 2 steps:
1)Renamed the files from the firmware directory c:\ProgramData\Nokia\Packages\Products\RM-825\ by replaceing the new product code 059R4L7 with the code that my phone has 059P710.
2)Opened Nokia Product Support Tool 5.0 and begin the Refurbish procedure, this procedure will replace my old firmware 1232.12.1235.5 with the new firmware 1232.2110.1244.3002.
Things seem to work, my phone is restarted and moved to Flash Mode but then I get this error:
Refurbish Failed
Signed FFU programing operation has failed with error code: 1313819477
See the attached image: Lumia820_Refurbish_Error.png
Can someone please help?
Is there another way to put a new firmware on my phone?
Please help!!!
Thanks,
Mircea
Click to expand...
Click to collapse
Hi I personally don't do "refurbish" method, but instead I use "recovery" with the phone turned off. Try it and I hope it won't kill your phone.
recovery mode
How do you put the phone in recovery mode?
mmuntean2 said:
How do you put the phone in recovery mode?
Click to expand...
Click to collapse
i think you must keep pressed vol down+power button until the Phone vibrate.
Sent from my Lumia 820 using XDA Windows Phone 7 App
I have just updated my Lumia 820 product code 059Q8W4 (Vodafone DE).
I used Nokia Care Suite 5.0 2012.45.4.5 to flash the phone with RM-825 VAR EURO2 CH ORANGE BLACK (059R2S0) downloaded with NaviFirm+ v1.7
I used the "Recovery" mode in Product Support Tool for Store, to do the update.
I have not found any problems with the update jet. The restore of settings and app from the cloid was very smooth, only neede to redo my startscreen and setup wifi.
MortenRJ said:
I have just updated my Lumia 820 product code 059Q8W4 (Vodafone DE).
I used Nokia Care Suite 5.0 2012.45.4.5 to flash the phone with RM-825 VAR EURO2 CH ORANGE BLACK (059R2S0) downloaded with NaviFirm+ v1.7
I used the "Recovery" mode in Product Support Tool for Store, to do the update.
I have not found any problems with the update jet. The restore of settings and app from the cloid was very smooth, only neede to redo my startscreen and setup wifi.
Click to expand...
Click to collapse
It looks like there not support for LTE (Test in Danmark w. Telia) on this firmware.
MortenRJ said:
I have just updated my Lumia 820 product code 059Q8W4 (Vodafone DE).
I used Nokia Care Suite 5.0 2012.45.4.5 to flash the phone with RM-825 VAR EURO2 CH ORANGE BLACK (059R2S0) downloaded with NaviFirm+ v1.7
I used the "Recovery" mode in Product Support Tool for Store, to do the update.
I have not found any problems with the update jet. The restore of settings and app from the cloid was very smooth, only neede to redo my startscreen and setup wifi.
Click to expand...
Click to collapse
Which PC operating system you used and the NCS with which Settings?
I tried this also yesterday with the same firmware without success.
My Nokia Lumia 820 has not even automatically restarted to go into the boot loader.
Also press "On / Off - Volume Down" button does not work.
Addendum:
This day I tray again with this firmware (RM-825 VAR EURO2 CH ORANGE BLACK (059R2S0)) and look that, it works!!!
My Nokia Lumia 820 is now a half-official Orange Switzerland phone, hihihi.
First, is a good firmware with my 1wish/hope: "WLan let activ with activ lockscreen"!!! :good:
Also its true, the 4G is not aviable, but will be updating later with a new firmware for sure.
Cool!!! Testing more this firmware, but till now not bad. :highfive: :good:
Hello all,
I have my Lumia 820 now since 4 weeks and I tried to read all about flashing a new Firmware, like the topics in Lumia 900 and Lumia 920 Section.
I came from the HD2 and I know few things about flashing, but Nokia is new for me.
My Device has at the moment the Firmware 1232.2109.1242.1002
I found out that available for me is: 1232.5951.1249.1004
The name is: 059Q9G6 RM-825_TMO_DE_VAR259454_12491_001_Black_v2_Default
I think the file should fit all my requirements (German T-Mobile Device).
My question now is, how can I backup my old Firmware, because in NCS I can’t find it and it seems that my old one is not available online.. I found some Tuts for flashing the device, I backuped all Settings in my Live-ID online. How can I restore after flashing the new Firmware?
There is also a Developer Firmware available, any improvements for me flashing this?
My device is not unlocked, will it be after flashing?
Maybe someone can help me trying to explain the most points I need to pay attention to so I don’t brick my device.
Thanks
Have you found a solution to your problem as I have exactly the same issue and got stuck. Thanks
mirceadeliu said:
Hi All,
I have a Nokia Lumia 820 Developer device with a buggy and old firmware installed, here are the details:
Model: NOKIA id101
Carrier: Developper v3
Software: Windows Phone 8
RAM: 851
Screen resolution: 480:800
OS version: 8.0.9827.70
Firmware revision number: 1232.12.1235.5
Because this firmware is buggy I would like to update to a new firmware. For this I have installed the Nokia Care Suite and run the Nokia Product Support Tool 5.0 to get more device information, here it is:
Type Designator: RM-825
Model Name: Nokia Lumia XXX
Product Code: 059P710
Software Version: 1232.12.1235.5
Using this information I have downloaded the latest firmware from Nokia servers using NaviFirm+ 1.7. The only problem was that I couldn't find a firmware that matches my Product Code: 059P710.
The good news is that I have found another Nokia Lumia 820 Developer Device firmware version 1232.2110.1244.3002 but the Product Code is different than mine, it's 059R4L7.
Now, in order to install this new firmware I have followed these 2 steps:
1)Renamed the files from the firmware directory c:\ProgramData\Nokia\Packages\Products\RM-825\ by replaceing the new product code 059R4L7 with the code that my phone has 059P710.
2)Opened Nokia Product Support Tool 5.0 and begin the Refurbish procedure, this procedure will replace my old firmware 1232.12.1235.5 with the new firmware 1232.2110.1244.3002.
Things seem to work, my phone is restarted and moved to Flash Mode but then I get this error:
Refurbish Failed
Signed FFU programing operation has failed with error code: 1313819477
See the attached image: Lumia820_Refurbish_Error.png
Can someone please help?
Is there another way to put a new firmware on my phone?
Please help!!!
Thanks,
Mircea
Click to expand...
Click to collapse
whats in a developer firmware? if u compare to a regular one?
Any updates on this thread? because i have also a dev firmware. I need to fix this before i sell this phone.
Ive chang me Digitizer as the previos cracked it worked without problems untill i updated to Amber, i have the previous Rom but i cant get it to any mode where NCS recognizes a connection is there away to put the phone into a Download mode? Ive tried also but nothing will recognoze it.
TO DELETE
Solution for Touch not working after Amber update
When your touch screen is not responding after updating to Amber (&GDR2) it is likely due to a non-original digitizer.
You have probably changed your digitizer after it cracked, right?
Non original digitizers directly from Nokia or trusted resellers do not work!
There is no solution other than finding an original digitizer and swap it with the cheap china version, you installed.
Then everything works as it should.
Greetings for all xda members,
I need your generous support regarding my Freetel Kiwami FTU152D.
It was working well on android 5.1 but i made a blunder by flashing a custom android 6.0 rom from needrom.com made for FTJ152D. I supposed that the FTU152D is having same hardware as FTJ152D , and its just and american version of the Japanese model.
But unfortunately things went wrong and i phine lost the IMEI after flashing.
Steps done to restore/Write IMEI:
1: Engineering mode:
CDS information is not available in engineering mode, tired to install CDS but failed.
2:Maui Meta Mode:
Phone reboots and doesnt enter inter meta mode.
3: SN Writing tool:
Phone simply reboots and fails to write the IMEI.
4:Rooting
almost all android and PC rooting apps(Kingo,King,Farmaroot, Root Genious etc.) failed to root the device.
please guide me how to get the IMEI working on android 6 or how can i got back to stock android 5 rom, haven't find and stock rom yet.
looking forward to experts opinion.
thanks.
Hi. Can somebody help me with that i try everything ,but nothing works.
So couple year ago i try to root my Phone Huawei P9 , and i didn't done it properly and now i have phone unlocked and FRP lock.
I want to download original firmware, but i cant. When i download to my phone and after i want to install its reboots i getting message"Your device is booting now..." and that's it .
Here some photos
Can you please mention the exact model of your device so that I can provide the correct firmware of your Huawei mobile device. You can also download Huawei P9 firmware from here or browse flashfilepro.com site categories for your specific device model.
Model number: EVA-L09C432B395
EMUI version: 5.0.1
Android version 7.0
zcode4u said:
Model number: EVA-L09C432B395
EMUI version: 5.0.1
Android version 7.0
Click to expand...
Click to collapse
I hope this link content will help you to find out your device issue
Error when updating from EVA-L09C432B395 to EVA-L09C432B397 through TWRP
Error when updating from EVA-L09C432B395 to EVA-L09C432B397. Error when updating.
forum.xda-developers.com
Hi everyone
I have a Oneplus 8t. Today morning when I woke up and opened my phone. It showed "Your device is corrupt. It can't be trusted and will not boot. visit this link on another device: g.co/ABH ".
I didn't try to install any kind of custom ROM and didn't download any apps directly from google.
I have really important documents on my phone and don't want to lose them.
When I opened fastboot, I got the following message
Product name: kona
variant: sm8 ufs
bootloader version:
baseband version:
serial number: 4274859a
secure boot: yes
device state: Locked
Please tell me how to proceed.
Kindly help.
You can also contact me at [email protected]
Wow this is weird one . so no recovery , custom kernel or roms or anything ha ?
and your bootloader is locked . how this happend is a mystery to me but i think you'll be able to
fix it with MSM tool and the unbrick guide which is availabe in the forums.
dlb4all said:
Wow this is weird one . so no recovery , custom kernel or roms or anything ha ?
and your bootloader is locked . how this happend is a mystery to me but i think you'll be able to
fix it with MSM tool and the unbrick guide which is availabe in the forums.
Click to expand...
Click to collapse
the phone switched back on its own after 1 day but now it keeps on switching off for no reason and sometimes it takes a day or two to switch back on