Related
As I was getting low on my LG-P500 phone, I tried looking for some app2sd solution, doing the following steps:
- Backup all SD card content to PC
- Boot into recovery (CWM5.0.2.7)
- From recovery, create sd-ext partition
- From recovery, format the new partition
- From recovery, mount usb device, restore all SD card content from PC.
- Reboot device, installed link2sd and managed to link applications to sd.
Now link2sd seems to work fine- I tried linking quite a few applications and all of them work fine, no complaints. It only gave me an error with some apps which I have previously *moved* to SD using Titanium backup, but upon moving them to internal storage link2sd picked them okay.
However, I noticed that using file explorer, root explorer etc- they all show the sd-ext partition as empty, with size of 0 bytes??
Then, I booted into recovery and tried to mount the sd-ext partition, but I get an error message... (all other partitions I can mount/unmount just fine).
To be sure, after each reboot it looks like all the applications linked2sd work appropiately, so everything looks fine.
However, now I am concerned whether I can create (and restore, of course) nandroid backups- what will happen with all these apps linked to sd? Am I right that CWM may not be able to backup (and therefore restore) anything that is on this partition?
Am I going to lose all these apps and data? Does TiB backup these apps+data and be able to restore them fine to sd-ext? I'm asking about TiB as a mediocre workaround of restoring applications that were in sd-ext (and thus omitted by CWM backup). That is, after restoring nand backup- doing an additional restore from TiB??
Any help/insight is welcome
Ah, yes, some more info:
Phone: LG optimus P500
ROM: Lupohirps CM9 4.0.3 from this thread http://forum.xda-developers.com/showthread.php?t=1558213
Recovery: CWM 5.0.2.7 (By the way, whenever I try to flash 5.0.2.0 I get an error...)
that's weird since the app working. what ekstension do you have on sd card fat? fat32?
Can you open Android Terminal (https://play.google.com/store/apps/details?id=jackpal.androidterm) and issue these commands:
su
busybox ls -la /sd-ext/
busybox mount
If /sd-ext doesn't show up in mount, then it is not mounted.
Actually CM9 for P500 lacks file /system/etc/init.d/05mountsd (this file is responsible for mounting /sd-ext). IMHO You should ask ROM developer about sd-ext support.
If you want to test (and potentially restore your Nandoid backup or reflash CM9 afterwards) I can give you this script from CM7 (actually modified version that allows any ext version).
Your sd-ext files are actually in data/sdext2, not in /sd-ext.
Also Try using Amonra 3.0.6, overall it has better sd-ext support, I find it mounts and wipes things like dalvick cache inside the sd-ext partition as well , which is handy, unlike CWM.
Thanks for all your replies!
Sdcard file system is fat32. For the partition I have no idea as cwm didn't ask for any specific (e.g. ext2/3/4) and I haven't seen any way to get this Info...
Anyway, following this thread, I did find that all the app/data is in /data/sdext2- not sure what it means in terms of nandroid backup& recovery but it looks more reassuring..
As to RA recovery, I'm not in particular in love with cwm- it is just what I'm used to from other android devices I've been using. Actually on my htc mt4g I was using ext4 touch recovery and that one I really liked, but it is not supported in lots of devices. That phone was stolen, unfortunately. I'll give it a try, though.
Sent from my GT-P7510 using Xparent Cyan Tapatalk 2
DavisNT said:
Can you open Android Terminal (https://play.google.com/store/apps/details?id=jackpal.androidterm) and issue these commands:
su
busybox ls -la /sd-ext/
busybox mount
If /sd-ext doesn't show up in mount, then it is not mounted.
Actually CM9 for P500 lacks file /system/etc/init.d/05mountsd (this file is responsible for mounting /sd-ext). IMHO You should ask ROM developer about sd-ext support.
If you want to test (and potentially restore your Nandoid backup or reflash CM9 afterwards) I can give you this script from CM7 (actually modified version that allows any ext version).
Click to expand...
Click to collapse
Thanks! Looks likeb system/ cache/ data are all yaffs2, /mnt/Sdcard is vfat and /data/sdext2 is ext4. Not sure what all the output means (relatime, barrier=1, data= ordered etc. etc.)
So, can I figure out where the /data/sdext2 is physically stored? Is it actually the sd-ext/ext4 partition? Looks like must have, as its contents are way bigger than phone's 200MB internal storage...
Thank you all again
Sent from my GT-P7510 using Xparent Cyan Tapatalk 2
jaibar said:
Thanks! Looks likeb system/ cache/ data are all yaffs2, /mnt/Sdcard is vfat and /data/sdext2 is ext4. Not sure what all the output means (relatime, barrier=1, data= ordered etc. etc.)
So, can I figure out where the /data/sdext2 is physically stored? Is it actually the sd-ext/ext4 partition? Looks like must have, as its contents are way bigger than phone's 200MB internal storage...
Thank you all again
Sent from my GT-P7510 using Xparent Cyan Tapatalk 2
Click to expand...
Click to collapse
/data/sdext2 is the mountpoint for the ext4 partition thats on your sd card, physically its obviously on your sd card, but If you use linux, data/ is where the all partitions other then home partition get "attached"/mounted to, the 11link2sd script made by link2sd in yout init.d folder actually mounts it sdext2, the name means nothing, just something link2sd names it as.
---------- Post added at 08:40 PM ---------- Previous post was at 08:30 PM ----------
So Basically nandroid will not back it up under /data/sdext2 as the script runs after recovery, the best way to backup apps that are on the ext partion is back them up using Titanium Backup, as that saves the real apks, and when you restore all your apps, select link2sd to automatically move them to sd-ext partition.
Hi at all,
at first sorry for my bad english.
I had a similar case. If I made a backup with cwm 5.0.2.7, cwm cant mount/read the sd-ext.
In a other thread a user wrote, that cwm 5.0.2.8 had problems with the sd-ext.
And he does downgrade to cwm 5.0.2.0, and than cwm will work.
So, I did this:
I open the rommanager and choose the option "install Clockworkmod", now I choose the "LG Optimus One (old BB)".
But i have the new baseband on my O1.
The basis of this is, if you choose the new baseband in the rommanager, he will install cwm 5.0.2.7. For the old is it the 5.0.2.0 version.
Now, Rommanger made the installation with cwm 5.0.2.0. to my phone.
After this i go in to the recovery and made my nand-backup. It works perfekt!
No problems with the sd-ext, after I did this.
May be this will help.
Fietz said:
Hi at all,
I open the rommanager and choose the option "install Clockworkmod", now I choose the "LG Optimus One (old BB)".
But i have the new baseband on my O1.
The basis of this is, if you choose the new baseband in the rommanager, he will install cwm 5.0.2.7. For the old is it the 5.0.2.0 version.
Click to expand...
Click to collapse
Thanks for the tip..
I have tried in the past to flash cwm 5.0.2.0 via Rom Manager, but I kept getting an error message, so I gave up.
Now I thought to give it a second chance, but as it fails to flash with Rom Manager (in the menu when I choose LG optimus one I don't get any choice between old BB or new or anything- it just reflashes 5.0.2.7) and from the "all recoveries menu I can only choose 5.0.2.0 but it gives an error message), so I downloaded the zip files from this thread http://forum.xda-developers.com/showthread.php?t=1523050 (including also Amon Ra 3.06) and tried to manually flash from recovery.
It flashed and showed recovery as "5.0.2.0" but nothing worked- every submenu that I tried to enter was black screen (with the CWM logo on background) and it gave me the creeps- I don't like being stuck without a functional recovery so I rebooted and flashed 5.0.2.7 again from Rom Manager.
I'll try to flash Amon Ra and see how it works.
[EDIT] flashed AmonRa 3.06 and it seems to work fine- able to mount/unmount all partitions including sd-ext, and it also has an option to check each of them in separate during nandroid backups.
A noobish question: it has also an option to include the ".android_secure" . Isn't this one a redundancy with sd-ext (e.g. contains all the apps/data that has been moved/linked2sd)?
jaibar said:
As I was getting low on my LG-P500 phone, I tried looking for some app2sd solution, doing the following steps:
- Backup all SD card content to PC
- Boot into recovery (CWM5.0.2.7)
- From recovery, create sd-ext partition
- From recovery, format the new partition
- From recovery, mount usb device, restore all SD card content from PC.
- Reboot device, installed link2sd and managed to link applications to sd.
Now link2sd seems to work fine- I tried linking quite a few applications and all of them work fine, no complaints. It only gave me an error with some apps which I have previously *moved* to SD using Titanium backup, but upon moving them to internal storage link2sd picked them okay.
However, I noticed that using file explorer, root explorer etc- they all show the sd-ext partition as empty, with size of 0 bytes??
Then, I booted into recovery and tried to mount the sd-ext partition, but I get an error message... (all other partitions I can mount/unmount just fine).
To be sure, after each reboot it looks like all the applications linked2sd work appropiately, so everything looks fine.
However, now I am concerned whether I can create (and restore, of course) nandroid backups- what will happen with all these apps linked to sd? Am I right that CWM may not be able to backup (and therefore restore) anything that is on this partition?
Am I going to lose all these apps and data? Does TiB backup these apps+data and be able to restore them fine to sd-ext? I'm asking about TiB as a mediocre workaround of restoring applications that were in sd-ext (and thus omitted by CWM backup). That is, after restoring nand backup- doing an additional restore from TiB??
Any help/insight is welcome
Ah, yes, some more info:
Phone: LG optimus P500
ROM: Lupohirps CM9 4.0.3 from this thread http://forum.xda-developers.com/showthread.php?t=1558213
Recovery: CWM 5.0.2.7 (By the way, whenever I try to flash 5.0.2.0 I get an error...)
Click to expand...
Click to collapse
Hi, Jaibar
I have LG Optimus One with JB 4.2.2, CM 10.1.
Here what I have done in order to gain extra space on my internal memory. All the steps that you have followed are the same as I did. BUT! There are two important things that I have followed that had greatly helped to succeed:
1) For every 100Mb internal memory - NO MORE than 512Mb of SD card memory(for my LG I have separated 965Mb on the SD card)
2) INT2EXT+ works with EXT2/3/4 partitions BUT INT2EXT4+ works with ONLY EXT4 partition. After I have watched this short video, and this blog post I have been able to restart my phone with extended internal memory.
Believe me, for three days I have been flashing my phone, trying to find the correct way. At the end I have noticed that the problem was that I couldn't mount /sd-ext I thought that maybe following this two rules will help - and it did!
I hope that it will help! Good luck
I recently managed to successfully root my TF101.
I installed CWM (Via ROM Manager) and downloaded CM9
I boot into CWM and attempt to do a nandroid...can't find path.
I attempt to just install from SDCard...can't find path
Realization (and research) hits that CWM can't see the external sd, and the system doesn't see it as SDCARD but EXT-.
CWM can't see the internal SDCard because apparently on the Tablet the ICS encryption locks that down (but doesn't on my EVO since the SC Card isn't part of the internal storage)
I attempt to perform a factory data wipe to clear out the encrtyption , but upon reboot CWM loads. I try to perform the boot-launcher data wipe, but then CWM loads.
I try to use CWM to factory reset but since it can see the damned SDCard because of the encryption, no dice.
My machine is not bricked, as I can still boot into the previous install but I can't seem unable to format the thing to install CM9.
What to do, and thanks.
It has been said multiple times before DO NOT USE ROM MANAGER.
Either use Thing O Doom's peri to install a different CWM or Gnufabio's Recovery installer or NVFlash a rom to completely wipe. And don't use encryption there is no point 99% of the time
I didn't check here first, which is obviously what was my first mistake.
Will any of those recoveries be able to access and format the SD Card area?
Also, I use encryption as I do have sensitive things on my machine that I don't want exposed in case the machine is stolen. First time I've ever had it give me a problem, as the phone encrypts differently.
Team roug's recovery has internal and external sd support and i think the encryption is an ics/tegra 2 bug more than anything
Ok, so I managed to get the new recovery on via Thing O Doom's peri. And I was able to install Revolver via the ext card...but upon boot I was prompted for my encryption pin and got the message that android was updating...My Build number is now Revolver but everything is the same as it was. I still can't factory wipe this damned thing.
Upon request to wipe, it boots back to recovery and says formatting data and cache, data wipe failed.
Tis site states http ://0xfeedface.org/blog/lattera/2012-06-04/installing-cm9-encrypted- android-tablet
The dilemma
When you encrypt your Android device, the /data partition is what gets encrypted. The partition in full is encrypted and cannot be mounted within CWM. CWM also cannot perform a wipe, since it cannot mount the /data partition. And CWM cannot mount the external SD card. This is our dilemma. No access to the internal SD. No access to the external SD. No way to perform a wipe and format the internal SD from CWM.
The Solution
What we need to do, then, is use adb while the tablet is in recovery mode to reformat the internal SD card, thereby removing the encryption. On the US Transformer Prime, the internal SD card is at /dev/block/mmcblk0p8. The partition for our spare SD card will be at /dev/block/mmcblk1p1. You will need to replace those device entries for any other device you might attempt this on. After formatting the internal SD card, we will mount it and then mount the external SD card at /data/media:
In CWM, wipe cache
adb shell
mke2fs -t ext4 /dev/block/mmcblk0p8 # Warning: This can take a while. Be patient.
mount /data
mount /dev/block/mmcblk1p1 /data/media
Now go back to CWM on your device, then go ahead and flash your CM9 and gapps zips like normal. You now have CM9 installed! The /data partition is not encrypted. If you do not need to flash any other ROMs (unlikely if you're reading this article), feel free to re-encrypt your device.
Click to expand...
Click to collapse
I don't know the block numbers for the TF01
you need to undo the encryption before you can wipe anything
You can't. Hence my problem. I cannot mount,delete, or format the SDCard. It sounds like the process in the above post is the solution, but I don't know how to find out what block numbers the tf101 uses.
If you don't mine losing your data NVflashing a rom will resolve all the problems
Yep nvflash will do the trick otherwise as the solution you found yourself explains
Use adb in recovery ( in other words hook it up on a pc ) for this you will need android sdk runnin on your pc
More info about adb u can find here
http://forum.xda-developers.com/showthread.php?t=1751439&highlight=adb+help
Good luck
Thanks to all, I have resolved my issue!
I had to download the stock rom, extract the blob, and use Wheelie for PC to NVFlash everthing abck to stock. I was then able to update over OTA, and use the excellent Thing O Doom's peri to re-root and flash the working recovery.
There should be several items in the Root FAQ up top, such as:
If you are encrypted and going to root, factory reset to get rid of the encryption FIRST since the encryption locks down the SDCARD partition (Unlike on the phone)and none of the recoveries can access it to mount. DON"T use ROM manage on the TF101 and always, always check XDA first.
:good:
darthrater said:
Thanks to all, I have resolved my issue!
I had to download the stock rom, extract the blob, and use Wheelie for PC to NVFlash everthing abck to stock. I was then able to update over OTA, and use the excellent Thing O Doom's peri to re-root and flash the working recovery.
There should be several items in the Root FAQ up top, such as:
If you are encrypted and going to root, factory reset to get rid of the encryption FIRST since the encryption locks down the SDCARD partition (Unlike on the phone)and none of the recoveries can access it to mount. DON"T use ROM manage on the TF101 and always, always check XDA first.
:good:
Click to expand...
Click to collapse
That FAQ is sadly pretty outdated, I wish I could liberate the OP
Glad all is working now though.
I am not new to ROM's I have dabbled here and there with my phones and the xoom. I followed the directions to a t for the Omni 4.4.2. I did the first part for putting bigPart TWRP on my xoom. I have the recovery on there and I can find my SD card with the rom and other files on there needed but it will not load after I install everything. The internal storage still shows at 0. I get the Omni bootloader and then a message from google pops up saying encryption unsuccessful and I need to perform a factory reset. When I try that it just brings me back to recovery. I don't know what I did wrong but the only thing that works is recovery. It's like nothing at all is on the internal storage of the xoom. I have tried to copy the files from my sd card over to internal and install, same thing. When I go back to check the files I copied to internal they are gone. The files I have on the sd card are there but it won't load the files on the internal storage to set up android on there. I can't even go back to an old restore cause I was using cwm recovery and the those restore files aren't recognized. I'm at a loss, any help would be greatly appreciated. I can't even get my computer to see so I can push the files over to it and I am pretty rusty with ADB to try and set that up.
I just tried to push the original twrp 2630 through adb and it flashed, I tried to reboot into recovery and it just staid at the twrp screen. Ughhh I'm getting so frustrated cause I had the xoom working perfectly on JB before I started messing around. Any help would be great, Even getting me back to stock and I can take it from there.
update
at0msplat said:
I am not new to ROM's I have dabbled here and there with my phones and the xoom. I followed the directions to a t for the Omni 4.4.2. I did the first part for putting bigPart TWRP on my xoom. I have the recovery on there and I can find my SD card with the rom and other files on there needed but it will not load after I install everything. The internal storage still shows at 0. I get the Omni bootloader and then a message from google pops up saying encryption unsuccessful and I need to perform a factory reset. When I try that it just brings me back to recovery. I don't know what I did wrong but the only thing that works is recovery. It's like nothing at all is on the internal storage of the xoom. I have tried to copy the files from my sd card over to internal and install, same thing. When I go back to check the files I copied to internal they are gone. The files I have on the sd card are there but it won't load the files on the internal storage to set up android on there. I can't even go back to an old restore cause I was using cwm recovery and the those restore files aren't recognized. I'm at a loss, any help would be greatly appreciated. I can't even get my computer to see so I can push the files over to it and I am pretty rusty with ADB to try and set that up.
I just tried to push the original twrp 2630 through adb and it flashed, I tried to reboot into recovery and it just staid at the twrp screen. Ughhh I'm getting so frustrated cause I had the xoom working perfectly on JB before I started messing around. Any help would be great, Even getting me back to stock and I can take it from there.
Click to expand...
Click to collapse
trying to give as much info as I can. I got the original twrp 2630 running, flash twrp big part, followed next step to to wipe everything except sdcard, this is what I got:
Updating partition details...
E:unable to mount '/system'
E:unable to mount '/cache'
E:failed to wipe dalvik
updating partition details...
E:unable to mount '/system'
E:unable to mount '/cache'
just fyi. cm13 has no option to decrypt once you've encrypted it, twrp cannot mount encrypted drives (atleast most of the time i've heard a few say it can that's why i tried it but 2.8.7.0 doesn't even ask for a password or try to decrypt in my case)
so pretty much once you encrypt your stuck with the rom you have unless you have this magical twrp that asks for decrypt password.
also to make things worse, twrp can't format and cm13 changes the sdcard path so although it sees the external sd it can't flash files from it (atleast on g3)
so the only way to fix is to boot into android, backup your internal storage to sdcard or computer
reboot into twrp run a manual format on /data/ from terminal command, then reboot, copy your twrp backup to internal sd, go back to recovery and flash backup, then copy internal sdcard files back to internal drive (from sd or computer backup)
the command to format is the following
mke2fs -T ext4 /dev/block/mmcblkXpXX (NOTE: REPLACE THE XpXX with the proper values for your device) you can find these values by asking in your device forums, or downloading a partition info app that will tell you and i'm sorry i can't remember the one i used, but this is the best way to be sure because even diff device variants sometimes have diff partition tables based on phone provider.
*edit* just for personal peace of mind i remind everyone that every device is diff and i cannot guarantee positive results but this 100% worked for me everything is back to normal.
I did this a few months back and ended up flashing factory images via adb and starting all over again which sucked
Very useful information. :good:
TWRP v3.0.0 can use the adopted storage device (encrypted SD card) now.
Seems it's been fixed because I am successfully using cm13 with twrp 3.0, albeit with visible performance loss.
I just want to say thanks a lot for this. I can once again mount my /data partition.
Hi guys,
I'll share some scripts (flashable) that I've made to help with xperia l internal memory shortage.
1. First one is the link2sd-enabler.zip: http://www24.zippyshare.com/v/UduJGjqJ/file.html.
For this to work you'll need a second partition on the external sdcard formated as ext4. So first partition is the vfat one, the second primary partition on the external sd card is the ext4 one. Currently I have a 8Gb ext4 second partition.
Installation procedure: prepare your external sdcard, flash the zip, install link2sd application.
2. Second is the 01link2sdmm: http://www86.zippyshare.com/v/9DSgorlH/file.html.
The link2sd application does not automatically link the oat directory of the application. This directory contains the compiled application in the form of an odex file. For big apps this file is pretty big. So this script will automatically link this directory to the sdcard second partition for the applications that are linked to the sdcard. This works in conjunction with the link2sd-enabler.zip script.
Installation procedure: put this script in the /etc/init.d directory with the proper permissions. This way it will run at boot. If you want to run this directly after you link an app you'll need to use automagic and make a rule to run this script after you exit the link2sd application.
Observations: This script is not needed if you switch the internal partitions because you'll have enough space to keep the odex file internally. It's your choice.
3. Third script is the mm-partition-swapper.zip: http://www10.zippyshare.com/v/eyRO7gLw/file.html.
This one will switch your sdcard and userdata partition on your current mm rom. This was tested on rr573 that I have installed, but it should work in other mm roms as well.
Installation procedure: Make sure you have enough space on the external sd card so the script will be able to save your current data partition files. Save the files that you need from your internal partition to your external sd card. Make a backup of your current rom from twrp in case something wrong happens. Format from TWRP the internal sd card as ext4. Flash the zip. If everything works ok then you'll have a rom with the internal partitions swapped and you'll have 4Gb of user data available (minus your space for the already installed apps).
!!!!!!!!!!!!!!!!!!Very important!!!!!!!!!!!!!!!!!!
Don't try formatting the internal sdcard as ext4 with twrp version 3.0.2! It seems that his twrp version does not support this. I'm using twrp 2.8.7.0 by Barbarosa.
Observations: Twrp does not support backing up/restoring internal sd. If you swap partitions you'll have to backup your ext4 internal sd manually from within twrp connected through adb (with a simple tar command)
4. I think 256 ZRAM for the rr573 rom is too big so this zip will change this to 128MB:
mm-128Mb-zram.zip:http://www103.zippyshare.com/v/XjVAnXEl/file.html.
Please make a backup before flashing the swap zip and report if this worked for you.
Hope this helps,
Thanks.
cojocar.andrei said:
Hi guys,
1. First one is the link2sd-enabler.zip:
For this to work you'll need a second partition on the external sdcard formated as ext4. So first partition is the vfat one, the second primary partition on the external sd card is the ext4 one. Currently I have a 8Gb ext4 second partition.
Installation procedure: prepare your external sdcard, flash the zip, install link2sd application.
Click to expand...
Click to collapse
I've been struggeling for quite some time to get the link2sd app working since I flashed MM.
I've done a clean install, flashed the zip, installed link2sd, but I still get a 'mount script error, Cannot create script, mount: no such file or directory.' Anyone got an idea what I do wrong?
thx!
mikelektro said:
I've been struggeling for quite some time to get the link2sd app working since I flashed MM.
I've done a clean install, flashed the zip, installed link2sd, but I still get a 'mount script error, Cannot create script, mount: no such file or directory.' Anyone got an idea what I do wrong?
thx!
Click to expand...
Click to collapse
Check if you have in the /etc/init.d directory the 00link2sd script. For this script to work you need a rom with a working init.d (otherwise this won't work obviously...). If you have the script there, then check if you see a directory /data/sdext2 (if this directory is missing, but you have the 00link2sd script in the /etc/init.d directory, then this means you don't have init.d support in the rom). If you partition your sdcard correctly then the second ext4 partition of you sdcard should me mounted in the /data/sdext2 directory ... All these you need to check before installing the link2sd app...
Awesome! Thank you. I'll try this
cojocar.andrei said:
Check if you have in the /etc/init.d directory the 00link2sd script. For this script to work you need a rom with a working init.d (otherwise this won't work obviously...). If you have the script there, then check if you see a directory /data/sdext2 (if this directory is missing, but you have the 00link2sd script in the /etc/init.d directory, then this means you don't have init.d support in the rom). If you partition your sdcard correctly then the second ext4 partition of you sdcard should me mounted in the /data/sdext2 directory ... All these you need to check before installing the link2sd app...
Click to expand...
Click to collapse
I have the init.d folder, but it seems the sdext2 folder was only created after I installed the link2sd app.
I tried doing it all over again, but it still doesnt work, same messages...
mikelektro said:
I have the init.d folder, but it seems the sdext2 folder was only created after I installed the link2sd app.
I tried doing it all over again, but it still doesnt work, same messages...
Click to expand...
Click to collapse
Then your rom doesn't have init.d support. You need a kernel/rom (more precisely a ramdisk) with init.d support to use this ... The rr573 supports init.d ... Try it with this one ...
cojocar.andrei said:
Then your rom doesn't have init.d support. You need a kernel/rom (more precisely a ramdisk) with init.d support to use this ... The rr573 supports init.d ... Try it with this one ...
Click to expand...
Click to collapse
Thx! Which do you recommend? I've tried several in the last two or three months. Now I'm running AOSP-OMS.
I ran slim, RR and CM 13 beta before without any problems, just the storage issue.
mikelektro said:
Thx! Which do you recommend? I've tried several in the last two or three months. Now I'm running AOSP-OMS.
I ran slim, RR and CM 13 beta before without any problems, just the storage issue.
Click to expand...
Click to collapse
I've just told you. RR573. For a completely working camera on this one just replace a camera library... Search the rr thread...
Sent from the center of the galaxy
3. Third script is the mm-partition-swapper.zip: http://www10.zippyshare.com/v/eyRO7gLw/file.html.
This one will switch your sdcard and userdata partition on your current mm rom. This was tested on rr573 that I have installed, but it should work in other mm roms as well.
Installation procedure: Make sure you have enough space on the external sd card so the script will be able to save your current data partition files. Save the files that you need from your internal partition to your external sd card. Make a backup of your current rom from twrp in case something wrong happens. Format from TWRP the internal sd card as ext4. Flash the zip. If everything works ok then you'll have a rom with the internal partitions swapped and you'll have 4Gb of user data available (minus your space for the already installed apps).
Click to expand...
Click to collapse
I use rom AOSP OMS . file zip working?
Brick and problem other ?
Thx you building script .
Thx advanced
I am on stryflex MM ROM and TWRP 3.0.2.
I formatted internal storage as ext4, then flashed mm-partition-swapper.zip.
Says that there is no ext4fs partition and I tried reboot recovery and my phone is dead now, can't turn it on...
I don't blame you, I blame myself for trying. But please help. Flashtool doesn't recognize flash mode.
Don't use this method. Not safe.
Option58 said:
I am on stryflex MM ROM and TWRP 3.0.2.
I formatted internal storage as ext4, then flashed mm-partition-swapper.zip.
Says that there is no ext4fs partition and I tried reboot recovery and my phone is dead now, can't turn it on...
I don't blame you, I blame myself for trying. But please help. Flashtool doesn't recognize flash mode.
Don't use this method. Not safe.
Click to expand...
Click to collapse
Sorry to hear this. If the script gave you this error then the script did nothing to your phone. It just aborted the procedure because it did not find the sdcard formated as ext4. It must be the twrp version. I'm using twrp 2.8.7.0 by barbarosa. I think twrp 3.0.2 does not support formatting the internal sdcard as ext4. Most pobably the twrp version 3.0.2 formated something else as ext4 or whatever instead of internal sd... I did not know this. Sorry again...
Try to search the brick threads. If you still have a blue light when in flashmode I think you still have a chance to resurect it...
Sent from the center of the galaxy
I've modified the post to warn people of this twrp version. So, people, use only twrp 2.8.x.x to format the internal sdcard. I'm using 2.8.7.0 twrp version by Barbarosa. I don't know if other twrp versions support ext4 on internal sdcard.
Sent from the center of the galaxy
Thanks for the solutions. So now if I only need to swap internal sd and /data, i just need to flash 3rd script? I'm quite confusing about partitioning and memory stuffs
newguyknowsnothing said:
Thanks for the solutions. So now if I only need to swap internal sd and /data, i just need to flash 3rd script? I'm quite confusing about partitioning and memory stuffs
Click to expand...
Click to collapse
You have to have twrp 2.8.7.0, then format internal sdcard as ext4 (wipe settings) and then flash the zip...
Sent from the center of the galaxy
Yes, formatting internalSD as ext4 is tricky. My recovery was broken. Probably formatted something else. It wasn't your script.
However I have no volume up button on my phone (fell out) - no fastboot. And just volume down button (flash mode) and a somewhat broken USB cable. Phone not recognized by flashtool at all...
cojocar.andrei said:
You have to have twrp 2.8.7.0, then format internal sdcard as ext4 (wipe settings) and then flash the zip...
Sent from the center of the galaxy
Click to expand...
Click to collapse
Ok thanks! One more question, If I somewhat want to undo this, I need to back up the current MM rom before flashing the script? Will the internal sd and /data automtically be swapped back when I restore the back up?
newguyknowsnothing said:
Ok thanks! One more question, If I somewhat want to undo this, I need to back up the current MM rom before flashing the script? Will the internal sd and /data automtically be swapped back when I restore the back up?
Click to expand...
Click to collapse
After swapping the partitions your old backups of the rom will not work anymore (or probably they would just revert the swapping. Anyway if you want to restore a backup that's been done prior to swap it's better to format back by hand the internal sdcard to vfat and data to ext4)
For backing up a rom with swapped partitions you'll have to select the sdcard instead of data partition in the backup options... I did not try it yet...
Sent from the center of the galaxy
Option58 said:
Yes, formatting internalSD as ext4 is tricky. My recovery was broken. Probably formatted something else. It wasn't your script.
However I have no volume up button on my phone (fell out) - no fastboot. And just volume down button (flash mode) and a somewhat broken USB cable. Phone not recognized by flashtool at all...
Click to expand...
Click to collapse
I don't know, sorry. You have to search the brick threads...
Sent from the center of the galaxy
I ran the the link2sd enabler script on my rr573, works like a charm now.
Thank you so much, I needed this!
Didn't swapped the storages yet.
The dream is real!
Congratulations.
Seeking a long time for a script like mm-partition-swapper.zip
Before seeing your post, I had already made the formatting of SD0 (ext4) to try to install Link2SD to work with SD0 without work.
I used the TWRP 3.0.2.
I could easy return the partition to FAT.
I intend to make a clean installation of ROM on my device to then install your mm-partition-swapper.zip script.
As both the "DATA" as SD0 are empty you still think need to format with TWRP 2.8.7?
No way to change this script without the data transfer?
Only formatting partitions and inverted mounts?
If not necessary then ok...but... please clear this my doubts.
Again without getting tired ... very thank you even for your script.