Does anyone have some different versions of the MTCRadio app for PX5 units?
I'm currently on Malaysk PX5 rom and the radio app works well but I'm just not feeling the color scheme as it doesnt really match my interior (VW Jetta). Does anyone have any other Radio apks with other skins that also support PX5 units which you can share?
as far as i remember there are 3 color to choose from, via the "OEM" icon.
blue, red & green. i dont think there are any alternatives, as this runs from the MCU and are not an normal APP like google maps.
I checked the OEM folder but didnt see any color options though perhaps its just not available for version 5 of the firmware. It was just specific to having the panel above with buttons to other apps. I'm mainly just wanting a different color scheme for the app though it needs to be compatible with PX5. There's some skins floating around for older units, I havent tried to install on my PX5 yet.
View attachment 4328699
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
Hi, i got erisin unit for my e39, it was good, but got boored, so i flashed now malaysk rom and updated mcu, from kgl1 v1,77 to kgl1 v2.55 i guess. Now i got some things i want to whange, can someone help me with them?
1: the 1/0 button on right top screen i want to remove it.
2: FM and SCR buttons does nothing, just scr force swiches unit off an goes to bootloader(to get buttons work as original)
3: in RGB menu blue is red and red is blue
4: remove the weather wiget which one is under clock, because it doesnt work
5: Is it possible for unit to go to sleep mode when the key is turned off, or make it to boot up much faster
6: whith CanBus i need ro chose? Bmw e39 1998 530d
Thanks for attention. Hoping that someone can help me with these issues not much to complaun about update, thanks to malaysk for this firmware.
P.S. Jus a newbie in customizing, sorry for my english. Any questions just ask. See link above for the photo.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi I just bought and px6 for my 4Runner and the display is very pixelated. Everything else works great. I am pretty new to this so I need some help on what to do. Any help would be much appreciated.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is it an MTCD/E?
What does reseller suggest when contacted for support?
Its MTCD/E. They told me to upgrade the MCU to 3.69 and also the android 10 11/13 which I did both and the screen looks exactly the same. I’m wondering if mine didn’t get damaged in shipping. Here is a link to what I bought.
https://www.amazon.com/gp/aw/d/B08F9LZLLB?ref=ppx_pt2_mob_b_prod_image
I have the same problem. It's a configuration issue. After updating MCU the screen start flickering and is pixelated. I guess the solution stays in upgrading the dmcu.img with the correct dmcu.ext screen#. I tried to ask the manufacturer which is the correct screen# for this unit but never heard back from them.
My screen looks good for a different resolution (1280x720 screen:18) but of course doesn't fit the physical screen.
@duttin26 Could you please share the dmcu.cfg file of your unit?
From Settings->Car->Factory Settings (code 126)->Export button -save to USB-A
I want to compare to see what is different between yours and mine
Here is mine
Hi, guys I'm new at this, so bear with me, I got a new android 10 unit from AliExpress, https://a.aliexpress.com/_mLwdGdk, the t7 with 4gb 64gb storage. I got here and checked and it's fine, same specs. My car is a Peugeot 508 2013.
Everything is working according to the specs, but the canbus setting are very different from what I've seen in other units alike this one. The seller has been trying to help me, but is hard due the language barrier and the time difference, 12 hours. I have the code for the factory settings. 3368, dunno if that is helpful.
First I can't seem to find how to put the front camera after reverse with the lines, I tried one option and swaps, but stays on it doesn't automatically turns off. Also there is no option to change the resolution of the camera in the radio.
I saw another video and that unit got messages from the car into the unit.
That's a canbus problem, if it is can I buy another one? Or can it be upgraded without bricking it. Is a launcher issue?, I'm lost.
Also is it safe to install any other launcher via the playstore?
Any tips are really appreciate it.
Thanks
This is the canbus I have installed...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After upgrading to GS 3.40 MCU / Android 9
Steering wheel remote control does not work.
No bluetooth either.
The yellow circle part of the touch screen does not light up.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Upgrading the MCU seems to have removed the factory settings.
I would like to receive factory setting data.
product link: https://www.aliexpress.com/item/32908064769.html?spm=2114.13010708.0.0.3a994c4dI5PrEd
suik choe said:
After upgrading to GS 3.40 MCU / Android 9
Steering wheel remote control does not work.
No bluetooth either.
The yellow circle part of the touch screen does not light up.
View attachment 5558293
View attachment 5558289
View attachment 5558291
Upgrading the MCU seems to have removed the factory settings.
I would like to receive factory setting data.
product link: https://www.aliexpress.com/item/32908064769.html?spm=2114.13010708.0.0.3a994c4dI5PrEd
Click to expand...
Click to collapse
What happens when you configure factory settings or apply the config backup you took before applying an MCU update file.
The crickets
I would like to modify the notification panel a bit.
I use a custom Rom, and are able to compile it my self (done it already), but never really changed anything.
Since I looked at some code, I would guess that I have to tinker around with xml files.
My Problem, where do I find them(to change the notification panel, directory would be helpful).
Are there other things I have to look out for when changing them(like file size, editing make files, etc.)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Making the grey background transparent
2.Only if I am able to, but I think that it would look better with the curves following the blue line.
3. I do not have a camera there, so it's unused space.
hey, i have a rooted galaxy with android 13, can i replace the notification panel files to have the stock notification panel, im new at modding so i dont know how to edit it
What Android OS is currently running?
xXx yYy said:
What Android OS is currently running?
Click to expand...
Click to collapse
android 13 one ui 5.1