Database Info

Is there a way to root on 5.1.1 23.4.A.1.200 ?

Hello there,
have been trying to root my new xperia z3 for 3 weekends now with no luck.
My bootloader has been unlocked through sony website, then relocked and unlocked many times using flashtool.
Looks like all the recoveries (doomlord, twrp) I could find work only on 4.4.4. Then I use flashtool to flash lollipop 5.1.1 23.4.A.1.200 and either wipe and loose the root or don't wipe all and enter a bootloop.
Flashing those recovery kernels straight on lollipop make the phone enter bootloop.
Are you guys able to root those Z3 under 5.1.1 ?
thank you

Sure shot easy way is flash kitkat firmware and use giefroot or flash 5.0 firmware and use kingroot.

Mate, you have to flash a prerooted version of 5.1.1 you can't just flash a stock rom and expect to stay rooted.
Downgrade to Kitkat then root and install a custom recovery. Then you download 5.1.1, Super Su and a custom recovery, create a pre rooted flashable zip with PRFcreator . Then flash it in your custom recovery and you're done. Rooted 5.1.1 with a custom recovery ready to rock.

Kingroot isn't recommendable, your IMEI is sent to China. Downgrade to 4.4, root with giefieroot, upgrade with pre-rooted ROM.
Btw: did you make a backup of your TA partition before unlocking bootloader?

Thanks a lot for your answer guys.
Am unusually struggling with this device.
lol1rfs said:
Mate, you have to flash a prerooted version of 5.1.1 you can't just flash a stock rom and expect to stay rooted.
Downgrade to Kitkat then root and install a custom recovery. Then you download 5.1.1, Super Su and a custom recovery, create a pre rooted flashable zip with PRFcreator . Then flash it in your custom recovery and you're done. Rooted 5.1.1 with a custom recovery ready to rock.
Click to expand...
Click to collapse
Have already downgraded to kitkat, installed custom recovery and rooted. But the 5.1.1 stock flash indeed wipe everything.
Haven't found yet a custom recovery for 5.1.1 that doesn't make the phone enter a bootloop. Would you happen to have a link ?
I'll give a look to that PRFcreator, didn't know about it.
Jkay7 said:
Kingroot isn't recommendable, your IMEI is sent to China. Downgrade to 4.4, root with giefieroot, upgrade with pre-rooted ROM.
Btw: did you make a backup of your TA partition before unlocking bootloader?
Click to expand...
Click to collapse
This is what I read about kingroot and haven't found any other way to root a 5.1.1 stock.
Where could I find a pre-rooter ROM then ? My wish was to be stock and rooted to be able to use apps like titanium backup and adblockers. Used to try custom roms every other day on my old SGS but today I'd be happy with something that just works.
Did not make any backup before unlocking but looked like flashtool was able to relock the device. Am I right guessing I didn't loose my DRM keys then ?
Thanks again for your answers.
Edit: looks like am missing sthg, what's the point in rooting a kitkat to upgrade with a pre-rooted lollipop right after ?

After KitKat root you get a Lollipop pre-rooted image and flash it: http://forum.xda-developers.com/z3/general/d6603-5-0-2-flashable-stock-23-1-0-690-t3056361
Here are the steps: http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056

I hope you made a TA backup before unlocking your bootloader, otherwise you have lost your DRM keys forever.
Anyway, if your bootloader is now locked, follow the guide that Licaon_Kter linked in the above post.
The exploit that lets us root our Z3 only works on Kitkat, so downgrade first, run the exploit to obtain root, and install recovery.
You will then have stock, rooted, KitKat.
To get to 5.1.1, you will then need to either create your own pre rooted firmware, or download one that someone has kindly posted on here.
If you want to learn how to do it, read this --> Create your own pre rooted firmware with PRF Creator
PRF Creator will create a zip file that can be flashed from recovery, so once you have recovery installed, it's dead easy.
That will get you where you want to be.
However . . . and there's always a however lol . . .
. . . if you still have an unlocked bootloader, it is much simpler from wherever you are.
Find any custom rom that has recovery built in, and almost all do, then fastboot the kernel only, the boot.img.
Reboot your device and enter recovery.
Install your pre rooted firmware that you have either created with PRF Creator, or downloaded from here.
Job done.
My personal advice is read, read, and then read some more.
It can be very complicated, but you'll get the hang of it.

Licaon_Kter said:
After KitKat root you get a Lollipop pre-rooted image and flash it: http://forum.xda-developers.com/z3/general/d6603-5-0-2-flashable-stock-23-1-0-690-t3056361
Here are the steps: http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056
Click to expand...
Click to collapse
I still have an unlocked bootloader since flashtool can lock and unlock it in a matter of a second.
Went back again in KK rooted with twrp recovery.
Wiped data, cache, dalvik.
Flashed D6603_23.4.A.1.232_Customized_US_SuperSU_XZDR2.8.2 1 from the link above and ... CWM recovery report install from sdcard completed after 1s and nothing more. Am still booting in KK after that.
This didn't work for me. Am losing it now with this phone.
Am I missing sthg ? Any advice ?
Can't use PRFCreator, am under mac os...
Thanks to all for your help

Try with TWRP too

Licaon_Kter said:
After KitKat root you get a Lollipop pre-rooted image and flash it: http://forum.xda-developers.com/z3/general/d6603-5-0-2-flashable-stock-23-1-0-690-t3056361
Here are the steps: http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056
Click to expand...
Click to collapse
Licaon_Kter said:
Try with TWRP too
Click to expand...
Click to collapse
tried twrp found there http://forum.xda-developers.com/z3/development/recovery-z3-twrp-2-8-4-0-t3028846
phone is not booting anymore.
twrp post says it doesn't work on stock room.
---------- Post added at 02:16 PM ---------- Previous post was at 02:05 PM ----------
Is there really anyone out there with a rooted stock lollipop ?
or you are all using customs ?
am seriously questionning the thing now

Why would you NOT follow the steps?
GO AGAIN from the start: http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056

Licaon_Kter said:
Why would you NOT follow the steps?
GO AGAIN from the start: http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056
Click to expand...
Click to collapse
I just can't, I don't have access to a window machine

Both giefroot and FlashTool are for Win/Mac/Linux.

Licaon_Kter said:
Both giefroot and FlashTool are for Win/Mac/Linux.
Click to expand...
Click to collapse
I appreciate your still trying to help me.
I do use flashtool and am able to root a Kitkat 23.0.A.2.93, so I don't see the point in using giefroot unless it could root a lollipop.
I have read thoroughly and downloaded pre-rooted lollipop stock roms from the link you provided.
Once under KK, rooted, with all settings set properly (debug, security, etc...), and all caches/dalvik/data wiped, the CMW recovery just don't flash those lollipop roms. After just one sec, it says install completed but then the device still boot under KK.
TWRP doesn't even intall, so am wondering if this is even possible to get a TWRP on stock rom.
Have tried all of those with bootloader unlocked and locked, or a mix like unlocked first to be able to root a KK, then relock to flash a stock prerooted 5.1.1 (as stated in the post) but then I get a device that doesn't even boot.
Tried dualrecovery too, flash the zip, and nothing.
I suspect all of you guys have used some sort of .bat windows utility to get through this.
Once again, thanks for your help and patience.

ikho said:
I do use flashtool and am able to root a Kitkat 23.0.A.2.93, so I don't see the point in using giefroot unless it could root a lollipop.
Click to expand...
Click to collapse
The point is to go from the BEGINing _again_: Flash stock KK, giefroot, XZ, pre-rooted LP
I have done it in Linux w/ locked bootloader and stock ROM, hence my pointers.
XZDualrecovery has TWRP 2.8.7.0. But, do take note that you use Volume Down to enter PhilzTouch Recovery and Volume Up to enter TWRP.

Licaon_Kter said:
Both giefroot and FlashTool are for Win/Mac/Linux.
Click to expand...
Click to collapse
am sorry, can't find how to use giefroot on a mac.
read quite a few post of people saying that was not working for them.

Run the INSTALL.SH file in a console (just like they instruct you for the .BAT file for Windows), it detects OS and runs either adb for Linux or for Mac.
Well, like I said, it worked fine in Linux, I guess it should work on Mac, providing the device is detected ok beforehand and such. ( what does "adb devices" outputs with the phone connected ? )

Licaon_Kter said:
Run the INSTALL.SH file in a console (just like they instruct you for the .BAT file for Windows), it detects OS and runs either adb for Linux or for Mac.
Well, like I said, it worked fine in Linux, I guess it should work on Mac, providing the device is detected ok beforehand and such. ( what does "adb devices" outputs with the phone connected ? )
Click to expand...
Click to collapse
yaaay, houray it finally worked
big thanks man, you saved me $500 on that one !

Public_data.zip & Full_HW_da Files Needed

I have the International MHA-L29 version. I require the above files to flash directly after SuperSU.
On the forum all links are dead or broken.
Could someone please send me a working link of where to get them?
I'm currently on stock Nougat rom, however, wish to unlock bootloader, flash recovery, root and flash the latest Oreo rom.
However, I require the above so that I may be rooted with recovery on Oreo.
Many thanks!

kanej2006 said:
I have the International MHA-L29 version. I require the above files to flash directly after SuperSU.
On the forum all links are dead or broken.
Could someone please send me a working link of where to get them?
I'm currently on stock Nougat rom, however, wish to unlock bootloader, flash recovery, root and flash the latest Oreo rom.
However, I require the above so that I may be rooted with recovery on Oreo.
Many thanks!
Click to expand...
Click to collapse
http://pro-teammt.ru/firmware-database/ - that's where I found them a few days ago for my US model.

irony_delerium said:
http://pro-teammt.ru/firmware-database/ - that's where I found them a few days ago for my US model.
Click to expand...
Click to collapse
Thanks.

Phone stuck in "device is booting now" screen after oreo update

Hi guys,
I tried to update my Bln-l21 from emui 5 (nougat) to emui 8 (oreo) using the guide https://forum.xda-developers.com/honor-6x/how-to/guide-update-to-emui-8-t3807806
It worked so I went on to install TWRP from https://forum.xda-developers.com/honor-6x/development/rom-emui-8-0-0-honor-6x-dual-sim-t3794079, as suggested in a comment on the guide.
Only then I realized that in order to install Gapps I needed GSM installer, so I downloaded it, but it didn't work because it loaded TWRP instead of the stock erecovery.
I started to panic real bad
I tried reinstalling the firmware using hwota8 (since i had upgraded i figured i had to use that), but it completely destroyed my phone.
Now it wont boot, recovery wont boot and neither erecovery. I can only get it to enter fastboot.
I know, I am a total noob, but PLEASE help me out on this, i'm desperate.
Thank you so much

If you can enter into fastboot, just install twrp, boot into twrp and flash the ROM using HuRUpdater. Use your external storage for the HuRUpdater and the ROM files. The instructions are here: https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279

Before flashing through Hurupdater wipe system Cache Data Internal and Dalvik/ART Cache.

galapagos said:
If you can enter into fastboot, just install twrp, boot into twrp and flash the ROM using HuRUpdater. Use your external storage for the HuRUpdater and the ROM files. The instructions are here: https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Click to expand...
Click to collapse
Thank you for the answer, I was able to boot in TWRP (the one in the original post) and I downloaded Huru, but I'm unsure of which firmware to use. I want to downgrade back to nougat and rebrand back to europe (since the guide in the original post made me change to china).
Thank you again

Just use China and then install a custom ROM

Mannan Qamar said:
Just use China and then install a custom ROM
Click to expand...
Click to collapse
which one should I choose from firmware finder?
Which rom do you recommend?

Bonny96 said:
which one should I choose from firmware finder?
Which rom do you recommend?
Click to expand...
Click to collapse
Just use the original files you used in the first place. The ones you downloaded from the thread. In terms of a custom ROM there is a thread in Custom ROMS section for Pixys OS. Just search stable Pie ROM for Honor 6x and install it. It's very smooth, etc.
This is a EMUI 8 ROM. If you want to go back to EMUI 5 don't use this. This will only restore EMUI 8. After that flash Custom ROM Don't go back to EMUI 5

Mannan Qamar said:
Just use the original files you used in the first place. The ones you downloaded from the thread. In terms of a custom ROM there is a thread in Custom ROMS section for Pixys OS. Just search stable Pie ROM for Honor 6x and install it. It's very smooth, etc.
This is a EMUI 8 ROM. If you want to go back to EMUI 5 don't use this. This will only restore EMUI 8. After that flash Custom ROM Don't go back to EMUI 5
Click to expand...
Click to collapse
Hi, I successfully flashed with Hurupdater and I'm going trough the installation of the pixys rom. The guide says that i need to flash the stock recovery for my device, where can I find it?
Can I pull it from the firmware I used for Huru? If that's the case, how?
Thank you again

I do have instructions over there but cause you asked I will tell.
Extract the Update.zip the large file. In it you will have an Update.app. Now serach for Huawei Update Extractor on XDA and Download it. Run the application and navigate to Update.app. Select it and in settings of Extractor uncheck the first option. Now extract Recovery_Ramdis.img and flash it. Luck.

Mannan Qamar said:
I do have instructions over there but cause you asked I will tell.
Extract the Update.zip the large file. In it you will have an Update.app. Now serach for Huawei Update Extractor on XDA and Download it. Run the application and navigate to Update.app. Select it and in settings of Extractor uncheck the first option. Now extract Recovery_Ramdis.img and flash it. Luck.
Click to expand...
Click to collapse
Thank you so much! Now the phone is working again, I'm only having trouble flashing magisk (it doesn't show up among the apps) but i guess i can live without it for now...
Have you got a paypal or something? I wanna buy you a coffe, it seems the least I can do to repay your kindness and patience!

Bonny96 said:
Thank you so much! Now the phone is working again, I'm only having trouble flashing magisk (it doesn't show up among the apps) but i guess i can live without it for now...
Have you got a paypal or something? I wanna buy you a coffe, it seems the least I can do to repay your kindness and patience!
Click to expand...
Click to collapse
Really there is no need for that. I did what anyone would do. Your thanks is enough.
Can you tell me what version you flashed. What TWRP did you use and what was the message after flashing.Now regarding Magisk, I am gonna assume you flashed the ZIP and the Magisk Manager app didn't show up, correct? To solve that just download Magisk Manager v6.0.1 and install the apk.
If that's not the issue then download any Root Checker app to see if device is rooted. Although I guess you need Magisk Manager to validate Root access. So just install Magisk Manager and let me know what it says. If it says device is unrooted then you probably need to flash Magisk again.
P.S: I don't have a PayPal. Not yet available in my country.

Mannan Qamar said:
Really there is no need for that. I did what anyone would do. Your thanks is enough.
Can you tell me what version you flashed. What TWRP did you use and what was the message after flashing.Now regarding Magisk, I am gonna assume you flashed the ZIP and the Magisk Manager app didn't show up, correct? To solve that just download Magisk Manager v6.0.1 and install the apk.
If that's not the issue then download any Root Checker app to see if device is rooted. Although I guess you need Magisk Manager to validate Root access. So just install Magisk Manager and let me know what it says. If it says device is unrooted then you probably need to flash Magisk again.
P.S: I don't have a PayPal. Not yet available in my country.
Click to expand...
Click to collapse
I really appreciate your kindness,
I flashed the latest version of magisk available from the official thread using the same TWRP from before (king of mezi TWRP from elemental rom thread) and it looked fine... Yes, the app didn't show up, I will try with the manager and I'll let you know.
[edit] I installed the manager and turns out it actually worked the first time and I'm already rooted!
Thank you again, you've been wonderful!

Glad to help.

Can only install official binaries message when flashing TWRP with Odin3 on A750FN U4

Hi, I'm having a lot of trouble trying to install a custom recovery. I had it working a couple months back but wanted to go with official again for dumb reasons and now i want to go back but it won't let me flash TWRP, i can't find a TWRP specifically for this version either. It's Android 10 with March security patch.
I hope someone can help me.
Thanks.

Please only create one thread per topic. I've removed the duplicate thread you started on this topic.
As far as your issue goes, I don't actually know much about Samsung specifics, but I believe that particular message means you haven't unlocked your bootloader. You'll need to do that before you can flash custom stuff.

Didgeridoohan said:
Please only create one thread per topic. I've removed the duplicate thread you started on this topic.
As far as your issue goes, I don't actually know much about Samsung specifics, but I believe that particular message means you haven't unlocked your bootloader. You'll need to do that before you can flash custom stuff.
Click to expand...
Click to collapse
actually Im also having the same problem even though i have unlocked my bootloader.. I had previously installed twrp and was trying custom os until one os (evolution x) for some bricked my phone and i had to flash the stock firmware and after that when i try to re-flash twrp through odin it is saying officail binary can be flashed.

Parthiv Shaji said:
actually Im also having the same problem even though i have unlocked my bootloader.. I had previously installed twrp and was trying custom os until one os (evolution x) for some bricked my phone and i had to flash the stock firmware and after that when i try to re-flash twrp through odin it is saying officail binary can be flashed.
Click to expand...
Click to collapse
Like I said, I'm not 100% on Samsung shenannigans, but have you checked to verify that you didn't lock the bootloader as a part of flashing the stock firmware?

OEM unlock toggle in Developer's Options

Hi ¡...
1. You have to reinstall via odin the latest version 9 (AP, BL...etc)
2. On reboot do the entire TWPR flashing process for android 9
The current problem is that there is no TWPR for android 10.
Cheers

Question ROM on Samsung A12 (SM-A127M).

Hello, I have the SM-A127M.
I have been able to do the following:
1.Unlock the Bootloader.
2. Root with Magisk.
But I want to follow this Guide "Installing TWRP and LInageOS" and I have the following questions:
1. Is it possible to install LineageOS on SM-A127M?
2. Is there a version of TWRP for Android 11 on the SM-A127M? Download a version to install with Odin as AP from here: https://eu.dl.twrp.me/a12/
But the only thing it did was go into an infinite loop in Download mode. Lucky that I was able to unbrick it by flashing the full firmware.
3. Is the reason for switching to LineageOS to improve the phone's performance, do those who already have it really feel an improvement in performance or is it the same as using it with Stock Android from Samsung?
Thank you for your answers.

Don't bother bro, nobody responds to the A127M variant, I got the same phone and a few post before yours i wonder to a custom rom and no one reply.

Dark_Cristian said:
Don't bother bro, nobody responds to the A127M variant, I got the same phone and a few post before yours i wonder to a custom rom and no one reply.
Click to expand...
Click to collapse
I think so. Have you tried this model using the installation guides on the forum to install TWRP and/or LineageOS? Have they worked for you? Have they failed you? It does not matter if it is for this specific model.
Thanks in advance.

geocamus said:
I think so. Have you tried this model using the installation guides on the forum to install TWRP and/or LineageOS? Have they worked for you? Have they failed you? It does not matter if it is for this specific model.
Thanks in advance.
Click to expand...
Click to collapse
no my mate, I don't do that for fear to brick the device 'cause it's my main phone and the backup phone have a issue with the battery. Thanks for the suggest.

I have the same phone, but i searched for a12s(sm-a127f) because the specs are the same

The physwizz dev have all on his channel. Twrp kernel etc... I've tried the twrp for this phone and it works well.

Oneplus# said:
The physwizz dev have all on his channel. Twrp kernel etc... I've tried the twrp for this phone and it works well.
Click to expand...
Click to collapse
Would you be so kind as to post the link? I can't seem to find it. :/

onlotus said:
Would you be so kind as to post the link? I can't seem to find it. :/
Click to expand...
Click to collapse
Sure https://t.me/a12schat . It's on telegram.

geocamus said:
Hello, I have the SM-A127M.
I have been able to do the following:
1.Unlock the Bootloader.
2. Root with Magisk.
But I want to follow this Guide "Installing TWRP and LInageOS" and I have the following questions:
1. Is it possible to install LineageOS on SM-A127M?
2. Is there a version of TWRP for Android 11 on the SM-A127M? Download a version to install with Odin as AP from here: https://eu.dl.twrp.me/a12/
But the only thing it did was go into an infinite loop in Download mode. Lucky that I was able to unbrick it by flashing the full firmware.
3. Is the reason for switching to LineageOS to improve the phone's performance, do those who already have it really feel an improvement in performance or is it the same as using it with Stock Android from Samsung?
Thank you for your answers.
Click to expand...
Click to collapse
Hello I have the SM-A127M Android 12 no the Android 11

geocamus said:
Hello, I have the SM-A127M.
I have been able to do the following:
1.Unlock the Bootloader.
2. Root with Magisk.
But I want to follow this Guide "Installing TWRP and LInageOS" and I have the following questions:
1. Is it possible to install LineageOS on SM-A127M?
2. Is there a version of TWRP for Android 11 on the SM-A127M? Download a version to install with Odin as AP from here: https://eu.dl.twrp.me/a12/
But the only thing it did was go into an infinite loop in Download mode. Lucky that I was able to unbrick it by flashing the full firmware.
3. Is the reason for switching to LineageOS to improve the phone's performance, do those who already have it really feel an improvement in performance or is it the same as using it with Stock Android from Samsung?
Thank you for your answers.
Click to expand...
Click to collapse
Twrp is fine but LineageOS no dont you cant call or text at all sometimes the sim isnt recognised even mention it in the sub reddit and everyone screams at you to download the official even though it happens on official builds

Try installing this custom and unofficial twrp for A12 Nacho.
https://androidfilehost.com/?w=files&flid=330751
[ODIN] If you couldn't install it on AP, try to install it on BL.
(No need to disable vbmeta I guess cuz I installed it on my a127m and my phone just booted normal)