Database Info

[KERNEL][64-BIT]Zapdos Kernel 1.1 || 26 July 2015

Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
Features
Compiled from latest CM source.
64-BIT.
Used official GCC toolchain for 64-BIT.
Disabled GFS.
Enabled ARCH_POWER.
Disabled CRC check.
Optimized SLUB.
Optimized Square Root Algorthm.
FIOPS I/O Scheduler.
Added PowerSuspend drivers.
Added Dynamic Fsync v2.0.
Uses AnyKernel configuration (enhanced compatibility theoretically)
Added ThunderPlug, a hotplug driver originally written by Varun Chitre, ported (tuned) to quad core devices by me.
In-App updates.
Merged latest CM changes.
Thermal throttle temperature made configurable.
Add BFQ IOScheduler.
Enabled HMP aware task scheduling.
Upgraded ondemand to Linux 3.18.
Implemented sysfs for Vibrator Intensity.
Added KCAL.
Added Dynamic Readahead Support.
Lowered VFS Cache Pressure.
Added LCD Notifier drivers to support ThunderPlug.
Installation Instructions
From PC
Download zip.
Put it in phone.
Flash .zip through recovery.
Done.
From phone
Download Gesture Control App (v1.7-r2) (Link Below)
Open app, go to Updater section.
Download and flash and enjoy.
Compatibility
It will work on all CM based ROMs (CM and Exodus confirmed).
May work on AOSP based ROMs as it uses AnyKernel, but confirmation required.
Download
Kernel - Direct
App- Gesture Control 1.7-r2
Kernel will soon support in-app updates
Credits
mr_illusionist - For testing, without whom Kernel release would be impossible.
faux123 and Varun Chitre - For their works and ports.
DoomLord - For providing the platform.
XDA:DevDB Information
Zapdos Kernel, Kernel for the YU Yuphoria
Contributors
corphish
Source Code: https://github.com/corphish/zapdos_lettuce
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2015-07-18
Created 2015-07-18
Last Updated 2015-07-26

Reserved

Reserved

Update v1.1
Changelog
1. Added ThunderPlug, tuned to quad-core devices by me.
2. Added LCD Notifier drivers to support ThunderPlug.
3. Lowered VFS Cache Pressure.
4. Added Dynamic Readahead Support.
5. Added KCAL.
6. Implemented sysfs for Vibrator Intensity.
7. Upgraded ondemand to Linux 3.18.
8. Enabled HMP aware task scheduling.
9. Add BFQ IOScheduler.
10. Thermal throttle temperature made configurable.
11. Merged latest CM changes.
12. In-App updates.
Download updated in OP.
This fixes Accelerometer issues in latest CM builds.

One of the most stable kernel for yuphoria.
I recommend everyone to try it.
Cheers!
Sent from my YU5010 using Tapatalk

[Kernel] [Uber 5.2] Butter kernel {GPe 5.1} {01/09/2015}

Butter Kernel​
Presenting Butter kernel, a custom kernel built with many optimizations and tweaks. This kernel will work on Stock lollipop GPe devices. The main aim is to provide a stable kernel with optimizations and some features.
Custom Features:
- Updated to latest GPe Sources
- Bumped to 3.4.108
- Compiled With Custom Uber 5.2 Toolchain
- Compiled With -O3 & Graphite Flags
- Compiled With Strict-Aliasing & Cortex A7 Tweaks
- Various Other Build Optimizations
- Replaced Qcom's hotplug binary with mpdecision
- GPU underclock/overclock(Min:100 MHz & Max:533 MHz)
- Add dev/frandom
- Added Support for Kernel Neon Mode
- Enabled Pipe Flag
- IntelliThermal V2 by Faux
- Simple GPU Algorithm
- Add BioShock/DanceDance Govs
- Added SmartMax/LionHeart Govs
- LCD Kcal Control by Savoca
- Faux's Sound Control
- CpuFreq and CpuBoost Optimizations
- Disabled Gentle Fair Sleepers
- Enabled Many TCP Congestions
- Added SIO,VR & ZEN IO Scheduler
- Sched & Mutex Tweaks
- Pushed Read Ahead value to 512
- Enabled FSync by default
- SELinux set to PERMISSIVE
- Power Efficient WorkQueues
- Reclaimed RAM from loggers
- Many more things (Check Github)
Disclaimer:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.​
DOWNLOADS:
AndroidFileHost
How to Flash:
1. Download the kernel and place it into your phone storage
2. Reboot into recovery
3. Install the kernel
4. Wipe Dalvik/ART Cache and Cache partitions
5. Reboot and enjoy![/B][/U]
I would like to thank @Flashhhh for this kernel. He has and promises to continue helping me with kernels. This wouldn't have been possible without him at all. Besides, I've also kanged commits from him (with his permission)
PLEASE DON'T MIRROR THE LINK
XDA:DevDB Information
Butter kernel for GPe 5.1, Kernel for the Moto G
Contributors
Aayushya, Flashhhh
Source Code: https://github.com/Aayushya/kernel-msm
Kernel Special Features:
Version Information
Status: Alpha
Created 2015-09-01
Last Updated 2015-09-01

Reserved.
P.S: Looking for someone to make me a good banner to go with this Kernel. If interested, please PM me

Nice work

Flashed it on non-GPE Stock Brazil 5.1. Successfully booted with /f2fs partition.

iDynamics said:
Flashed it on non-GPE Stock Brazil 5.1. Successfully booted with /f2fs partition.
Click to expand...
Click to collapse
Was it a single sim or dual one?

yeshwanthvshenoy said:
Was it a single sim or dual one?
Click to expand...
Click to collapse
Single sim.

iDynamics said:
Flashed it on non-GPE Stock Brazil 5.1. Successfully booted with /f2fs partition.
Click to expand...
Click to collapse
Idem here!.

Well congrats on this new beauty. After long time i see faux stuff for official ROMs. lolz but you forgot to thanx faux for his hotplug

MP Decision options are missing in kernel tweaker. All cores stay online. Thanks for the wonderful work.

O that note...the battery is killing itself.
Waiting for a fix.

iDynamics said:
MP Decision options are missing in kernel tweaker. All cores stay online. Thanks for the wonderful work.
Click to expand...
Click to collapse
in synapse it appears. But some options do not appear as intellithermal

@Aayushya any updates to this

[KERNEL]☭✯ Soviet Star Kernel ☭✯ MIDO[LINARO][CAF]

Disclaimer​
Code:
/*
* Your Warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, dead dogs, or cats,
* but i'm very interest in thermonuclear war, so if you point the finger
* at me for messing up your device just because this kernel, I will
* send you to the mars with Nuclear Rocket. Act accordingly.
* I know this paragraph is conspiracy-included, so
* dont ask about it. Welcome.
*/
☭✯ Soviet Star Kernel ☭✯ ​RED MI NOTE 4 SD​
Features:
Upstream to 3.18.70 & CAF September 07, 2017 LA.UM.5.6.r1-05800-89xx.0
Android O support
Compiled with Linaro 7.x A53 tool-chain
Optimized for msm8953 chip
KCAL color control
Sound control
GPU boost
KSM,ZRAM, ZCACHE & FONT SWAP
Dynamic Fsync, Arch Power,CRC & Gentle fair sleepers toogle
Added Intelitermal solution
FIOPS, ZEN,MAPLE,SIO,BFG,CFQ,deadline,noop I/O schedulers
ioswitcher
OC to 2.2 ghz
Blue_active,despair,chill,electron,relaxed,alucard,darkness,nightmare,zzmoveconservative, ondemand, userspace, powerspace, interactive(default), performance
Tweaked interactive governor
Early suspend driver
Vibration intensity control
F2FS support
Fingerprint sensor boost driver
exFAT Support
Disabled CRC check (up to 30% faster I/O)
Blocked many wakelocks
USB fast charge
KSM optimization
Zram optimization
random updated to 4.2
Frandom number generator
HZ 100 for best performance
HW 32,chacha20poly1305,poly1305 & SHA256 cypto support
Load average fix
Optimized SHA256
Nvidia power saving tunnigs
Ardeno idler
Lazyplug hotplug
Power suspend
Quick wakeup
USB fast charge 2.0
KCAL color control
Works in both AOSP/LineageOS based ROMs
General Performance & Battery life optimizations
And more you can find on my GitHub in commits
DOWNLOADS ​
Credits:
- LINUS for the sources
- @LordArcadius
- @DroidTug
[email protected]
- @franciscofranco
[email protected]
[email protected]
- @Arnav Gosain​-all the other developers from i cherry-picked commits
-all the other testers
XDA:DevDB Information
☭✯ Soviet Star Kernel ☭✯ MIDO, Kernel for the Xiaomi Redmi Note 4
Contributors
NATO66613, NATO66613
Source Code: https://github.com/kondors1995/android_kernel_xiaomi_msm8953
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R6
Stable Release Date: 2017-09-10
Created 2017-09-10
Last Updated 2017-09-10

Reserved

Reserved

Important Information
You will need EX Kernel Manager to use Sound Control or use this Modded Kernel adiuter adiuter!
Getting Fruitloops(bootloop)? Bugs? Or any other issue? Then post here with logs! cause LOGS or GTFO.
Do read the OP before posting any question or any issue.
Do not ask same question again
Every included feature of this kernel will be given in the features section or in change-logs. Do not ask whether this kernel have this and that feature.
If you do not read OP or ask same question again then you'll be ignored.

CHANGE LOG
R6 release
https://pastebin.com/UqBVGQAn

wow

Kernel looks awesome!

For Mother Russia !

Awesome work. Does this kernel support AOSP & Lineage?

For miui 8/9 Nougat or only for LOS and Aosp based custom ROMs.. ??! [emoji848]
And what's the difference between usb fast charge and usb fast charge 2.0.. ?! [emoji848]
Sent from my Redmi Note 4 using Tapatalk

Dear sir NATO66613, does kernel support generic USB joystick, I trying so many kernels but nothing support joystic, someone people saying its problem of drivers please sir fix this problem
Redmi note 4 not detecting joystick via otg :'(
---------- Post added at 06:31 PM ---------- Previous post was at 06:30 PM ----------
Dear sir NATO66613, does kernel support generic USB joystick, I trying so many kernels but nothing support joystic, someone people saying its problem of drivers please sir fix this problem
Redmi note 4 not detecting joystick via otg :'(

Somebody testing this kernel?
Enviado desde mi Redmi Note 4 mediante Tapatalk

dunklesgemut said:
Somebody testing this kernel?
Enviado desde mi Redmi Note 4 mediante Tapatalk
Click to expand...
Click to collapse
Just installed on los 15 which is a secondary with dual boot patcher. It booted and ran ok but kernel info in settings said unknown. Will report later on how well it runs.

zzmoove does not work as it should.
It does not have the functions of HOTPLUG.
Do not scale frequencies as you should.
Does not automatically disable cores.
Bad zzmoove.-
* Lazyplug hotplug also have bugs

mastersaitek said:
Awesome work. Does this kernel support AOSP & Lineage?
Click to expand...
Click to collapse
This is what the OP said
Every included feature of this kernel will be given in the features section or in change-logs. Do not ask whether this kernel have this and that feature.
If you do not read OP or ask same question again then you'll be ignored.
Click to expand...
Click to collapse

Finally kernel that is focusing on performance , wish you best of luck and im going to test this asap..

Awesome kernel ! Works pretty fine. The performance is same but I did notice faster game response in asphalt 8.... Overall smooth kernel

Would you make version of MIUI sir, i am willing to testing for you

Awesome one..maybe any plan 4 stock miui?

looks good. thanx very much

[Kernel][surnia] SomeFeaK 2 for Moto E 2015

Because you all loved SomeFeaK 1 (no1 cur if you didn't), here it comes SomeFeaK 2 kernel for device codename "surnia".
The kernel should work in any Android Oreo (8.0) custom ROM.. Tested and working in XT1601 (LATAM).
Disclamier:
Code:
[COLOR="red"]* Include <std_disclaimer.h>
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*[/COLOR]
Features:
Added by me:
Upstreamed to Linux v3.10.108!
Governors: impulse and elementalX, yankactive, zzmoove, darkness and bioshock.
Double tap to wake (DT2W).
Enabled advanced TCP congestion managers: veno, westwood, vegas, illinois, and more.
Automatic thermal throttling and CPU cooling driver added and enabled.
Enabled CPU current throttling driver
Fixed temperature handling.
Dev info:
In order to make use of the new hidden LED's available behavior, it's needed that some Java developer (not me, I don't know a thing about Java) to develop an application. Here I'll give you a sort of "API" that you should use to wake up the required triggers for "if there's a notification or not".
To turn on the LED set trigger to default-on:
Code:
su -c "echo default-on > /sys/devices/soc.0/leds-atc-e3be1600/leds/charging/trigger"
To turn off the LED set trigger to none:
Code:
su -c "echo none > /sys/devices/soc.0/leds-atc-e3be1600/leds/charging/trigger"
I've also added the required modules for the LED to be able to process a hold on during "x" milliseconds and keep off during "x" milliseconds. To set it do it like as follows.
Switch trigger to timer:
Code:
su -c "echo timer > /sys/devices/soc.0/leds-atc-e3be1600/leds/charging/trigger"
Now, set time on during 0,5 seconds (500 milliseconds):
Code:
su -c "echo 500 > /sys/devices/soc.0/leds-atc-e3be1600/leds/charging/delay_on"
Now, set time off during 1 second (1000 milliseconds):
Code:
su -c "echo 1000 > /sys/devices/soc.0/leds-atc-e3be1600/leds/charging/delay_off"
For now, you must have a charger connected. It seems to be a hardware issue but I'll try to investigate it anyways.
Click to expand...
Click to collapse
Downloads:
Click here or go to Downloads tab at the top of the thread, if something goes wrong, just go for AFH here.
Bugs:
No known issues.
Bugs marked with a "*" will be fixed in the next release.
Testing: (by users and me)
UltraAOSP: no bugs found.
XDA:DevDB Information
SomeFeaK 2 for Moto E 2015, Kernel for the Moto E 2015
Contributors
facuarmo, ishubhamsingh, infinite4ever, squid2, ElDainosor
Source Code: https://github.com/FacuM/android_kernel_motorola_msm8916-3
Kernel Special Features: everything from r20 Squid2's build, advanced LED control, DT2W, impulse and elementalX governors and much more!
Version Information
Status: Stable
Created 2018-01-10
Last Updated 2018-01-09

Changelog (v5.00):
Kernel changes:
Finally corrected sdcardfs! Thanks to @ishubhamsingh .
Now working with 8.1.x!
Updated binder.
General performance improvements.
Other changes:
None.
Download:
Main link: https://forum.xda-developers.com/devdb/project/dl/?id=28026
Alternative link: https://www.androidfilehost.com/?fid=817906626617957399
MD5: d934b46cd7061380357b996a769e2f73
Bugs:
No known issues.

Changelog (v5.50):
Kernel changes:
Get rid of softvfp+vfp and start using neon (hardware FPU).
Significantly improve performance!
fs: improve overall i/o performance.
Other changes:
Removed almost all warnings during compilation related to false positives.
Corrected source indentation mistakes.
Download:
Main link: n/a
Alternative link: https://www.androidfilehost.com/?fid=962157660013070494
MD5: c5f050b04d1e3dc5f8fdf0f3093480cf
Bugs:
No known issues.

CypherOS v5.1(android 8.1) beta ended up to bootloop after flashing latest one kernel but on i also tried it with validusOS v16.5 (android 8.0) it booted and work quite nice but on opening some social apps like facebook or etc. It lags a bit !!

hamxa266 said:
CypherOS v5.1(android 8.1) beta ended up to bootloop after flashing latest one kernel but on i also tried it with validusOS v16.5 (android 8.0) it booted and work quite nice but on opening some social apps like facebook or etc. It lags a bit !!
Click to expand...
Click to collapse
and the camera does not work anymore with the kernel on validus

mik2929 said:
and the camera does not work anymore with the kernel on validus
Click to expand...
Click to collapse
Nope camera does not work you still need footej camera to get it working.
EDIT: Sorry but camera is not working while using footej.

A fixed build will be available soon! Sorry for any inconvenience.

5.0 on resurrection remix boots straight into fastboot as a fallback method, 5.5 bootloops on the same rom

facuarmo said:
A fixed build will be available soon! Sorry for any inconvenience.
Click to expand...
Click to collapse
No more news?

Amazing work! This kernel works on 7.1.2 roms?

@facuarmo did you still developing this kernel?

I can't find the download link for surnia, where is it?

[CLOSED][KERNEL][MIDO] Octopus Kernel

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at yo
*/
Features:
• CPU Freq 652-2208MHz
• GPU Freq 133-700MHz
• CPU Governors: Interactive, Conservative, Ondemand, Userspace, Powersave, Performance, Electron and Intelliactive
• I/O schedulers: bfq, noop, deadline, cfq, maple
• Sound Control, KCAL, Vibration Strenght
• SafetyNet bypass by Sultanxda
• Boeffla wakelock blocks
• Spectrum Support
• Etc........
Installation Steps:
- Backup your current kernel!
- Download latest kernel
- Boot into TWRP Recovery
- Select the package
- Reboot (no need to wipe anything)
Download, Update and Changelog:
POST 16
Thanks to:
- abhishek987
- akhilnarang
- TheHitman7
- flar2
- frap129
- franciscofranco
- Adesh15
- krasCGQ
- More on my github commit
​
XDA:DevDB Information
Octopus Kernel, Kernel for the Xiaomi Redmi Note 4
Contributors
ocoot
Source Code: https://github.com/ocoot/android_kernel_xiaomi_msm8953
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V1.0
Stable Release Date: 2018-12-29
Created 2018-12-29
Last Updated 2019-01-22

Seems working great

Need a performance kernel like eXtremeKernel
Anyways good work ?

Hey @ocoot is this kernel support spectrum???

Are this kernel good for battery save and gaming?

Question: Does this kernel support exfat, ntfs, f2fs?
Request: I don't know whether or not you accept feature requests but I'd love to have intelliactive cpu governor which saves tons of battery while maintaining balanced performance.

Lucciferr said:
Hey @ocoot is this kernel support spectrum???
Click to expand...
Click to collapse
Not yet, soon!
falzrx said:
Are this kernel good for battery save and gaming?
Click to expand...
Click to collapse
Its good for daily use, and for gaming i'll do my best to improve for reaching the best
greenys' said:
Question: Does this kernel support exfat, ntfs, f2fs?
Request: I don't know whether or not you accept feature requests but I'd love to have intelliactive cpu governor which saves tons of battery while maintaining balanced performance.
Click to expand...
Click to collapse
f2fs,exfat,ntfs its support (i think, forgot about that. too many commit). i'll do my best btw, thankyou

ocoot said:
Not yet, soon!
Its good for daily use, and for gaming i'll do my best to improve for reaching the best
f2fs,exfat,ntfs its support (i think, forgot about that. too many commit). i'll do my best btw, thankyou
Click to expand...
Click to collapse
I've found a bug. Device isn't connecting to Android auto in my car.

ocoot said:
f2fs,exfat,ntfs its support (i think, forgot about that. too many commit). i'll do my best btw, thankyou
Click to expand...
Click to collapse
Awesome. Thank you.

This kernel $**kz Full Lag in PUBG

Kuttuzzzz said:
This kernel $**kz Full Lag in PUBG
Click to expand...
Click to collapse
Being a senior member, you should act like one. You have no right to say such thing to a developer until and unless he lives on your pennies. You could just simply report an issue but instead you show how 'human' you are with that post. Keep in mind that the developer has feelings and sentiments too.

Walden0 said:
Being a senior member, you should act like one. You no right to say such thing to a developer until and unless he lives on your pennies. You could just simply report an issue but instead you show how 'human' you are with that post. Keep in mind that the developer has feelings and sentiments too.
Click to expand...
Click to collapse
Finally i can meet this type of people again since 4 years ago...

Nicklas Van Dam said:
Finally i can meet this type of people again since 4 years ago...
Click to expand...
Click to collapse
? _/\_

This should be potential custom kernel
More OC and UC so we have more option
Add display setting profile preset so easy to use without tinkering with every value in display setting
Sent from my Redmi Note 4 using XDA Labs

Are this kernel support spectrum?
Sent from my Redmi Note 4 using XDA Labs

Octopus Kernel Build 22-01-2019
Changelog:
• Upstreamed to linux 3.18.132
• OC GPU to 700MHz
• Intelliactive Governor Added
• Treble (AOSP Oreo/Pie, GSI Oreo/Pie) and Pure MIUI Nougat Support now
Download
Octopus Kernel MIUI: https://androidfilehost.com/?fid=11410963190603905969
Octopus Kernel Treble: https://androidfilehost.com/?fid=11410963190603905968

Thread closed at OP request