Hello friends, I recently came across this firmware for the lg k371 of att https://www.mylgphones.com/lg-k371-stock-firmware-v10b.html
I would like to know if it will serve me to flash a k371 ATT that has software version k37111n or if it would damage the phone
yes
Campero said:
yes
Click to expand...
Click to collapse
thanks for responding, so can I flash that kdz v10b on my k37111n without risk of damage? As it says it is only for the v10b and v10a version I had the doubt.
so can I flash that kdz v10b on my k37111n without risk of damage?
No
Campero said:
so can I flash that kdz v10b on my k37111n without risk of damage?
No
Click to expand...
Click to collapse
in another post I read that a user managed to go down from 11n to 10b using the refurbish option of lg UP you know something like that or it would kill him with the error 9008
marzhall24 said:
in another post I read that a user managed to go down from 11n to 10b using the refurbish option of lg UP you know something like that or it would kill him with the error 9008
Click to expand...
Click to collapse
I was the one who commented that, that's why I have it as a brick
Campero said:
I was the one who commented that, that's why I have it as a brick
Click to expand...
Click to collapse
Hi, I also have the same problem. I used that option "Refurbish" instead of "Upgrade". Have you found a solution?
Asuaz said:
Hi, I also have the same problem. I used that option "Refurbish" instead of "Upgrade". Have you found a solution?
Click to expand...
Click to collapse
ask what do you think a hard brick ?
qualcom code 9008
Campero said:
ask what do you think a hard brick ?
qualcom code 9008
Click to expand...
Click to collapse
I had the same error. I did the following:
1) I installed the rom Nougat K37111n-K37120j using FOTA upgrade and error appeared.
2) I reinstalled the rom V10b using Upgrade. And it settled without problems.
The system starts perfect, but now I do not have Imei. "Null Null" appears.
Asuaz said:
I had the same error. I did the following:
1) I installed the rom Nougat K37111n-K37120j using FOTA upgrade and error appeared.
2) I reinstalled the rom V10b using Upgrade. And it settled without problems.
The system starts perfect, but now I do not have Imei. "Null Null" appears.
Click to expand...
Click to collapse
you have to repair the imei,
use chimera tool to repair the imei
Campero said:
you have to repair the imei,
use chimera tool to repair the imei
Click to expand...
Click to collapse
did u repaired from the brick ? in case of yes please tell me how, had bricked mine after flash
Related
Hi everybody..
I'm in desperate need of help. After attempting to root my g4 somehow something went wrong and the phone is completely dead with no sign of life . I know there isn't a way yet to unbrick the g4 but I'm hoping somebody out there is working on it and maybe can help me out.. I'm willing to donate for the help Thank you !
What exactly are your symptoms? Does it not even turn on? Have you tried getting into download mode? How exactly did you try to root it? What were your steps and are you able to identify where you went wrong exactly?
petermg said:
What exactly are your symptoms? Does it not even turn on? Have you tried getting into download mode? How exactly did you try to root it? What were your steps and are you able to identify where you went wrong exactly?
Click to expand...
Click to collapse
I was trying to gain root access following this method : http://forum.xda-developers.com/g4/orig-development/root-tmo-vzw-intl-variants-soon-root-lg-t3164765. everything seemed to go well but after it was complete the phone wouldn't start and it booted only to a message on the LG LOGO with something failed. At that point I was still able to get to download mood so I tried to restore it to stock doing this : http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848. again the process went like it should but at the end the phone went dead with no signs of life, No led light, No vibration, can't turn on to anything and only gets detected on the computer as " qhsusb bulk ". My guess is I used the wrong KDZ files
I would appreciate it if you can help.
It indeed sounds like you have a hard brick, in which case the device can't be brought back to life.
However for chance, and for future reference. Which kdz did you try to flash? Assuming your device is the ATT model, then did you download the Puerto Rico kdz?
Because there is not a KDZ or TOT for the ATT H810 model the Puerto Rico KDZ from Claro will recover an ATT soft brick. These are labeled H810PR.
xxxwalo said:
I was trying to gain root access following this method : http://forum.xda-developers.com/g4/orig-development/root-tmo-vzw-intl-variants-soon-root-lg-t3164765. everything seemed to go well but after it was complete the phone wouldn't start and it booted only to a message on the LG LOGO with something failed. At that point I was still able to get to download mood so I tried to restore it to stock doing this : http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848. again the process went like it should but at the end the phone went dead with no signs of life, No led light, No vibration, can't turn on to anything and only gets detected on the computer as " qhsusb bulk ". My guess is I used the wrong KDZ files
I would appreciate it if you can help.
Click to expand...
Click to collapse
Maybe you downloaded the wrong img file from the first post? It has to not only match your phone, but ALSO match the version of the firmware you're currently running. That's why this method here is better:
http://forum.xda-developers.com/g4/general/lg-g4-100-root-success-directives-root-t3180586
Because you just make a backup img of your system partition and then inject root into that and you have a new rooted system partition img file along with your original system partition image file so you can go back to stock if you want some time later. I'm guessing you tried flashing the wrong version of your firmware. Do you know what version you were on? Looks like the only one listed on that thread is version g. I'm on version b, so if I were to have tried that, I would also have had an error when trying to boot. Had you made a backup of your original system partition as mentioned here you should have simply been able to dd it back and you'd be up and running. However now it looks like you've "hard bricked" your phone indeed. Out of curiosity, which KDZ file did you use? What's the file name that downloaded?
It looks like there are some utilities created that can UNBRICK some phones when they get into this state, but it looks like they have had custom scripts written for the partitions of those phones, for example:
https://www.youtube.com/watch?v=ERZvlJIC9dE
https://forums.oneplus.net/threads/solution-recover-from-hard-bricked-oneplus-one.104943/
Maybe someone familiar with how those apps run could modify that app for unbricking the G4s? Currently however, there doesn't seem to be anything you can currently do to immediately fix your phone. So ... can you get it exchanged or replaced????
xxxwalo said:
I was trying to gain root access following this method : http://forum.xda-developers.com/g4/orig-development/root-tmo-vzw-intl-variants-soon-root-lg-t3164765. everything seemed to go well but after it was complete the phone wouldn't start and it booted only to a message on the LG LOGO with something failed. At that point I was still able to get to download mood so I tried to restore it to stock doing this : http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848. again the process went like it should but at the end the phone went dead with no signs of life, No led light, No vibration, can't turn on to anything and only gets detected on the computer as " qhsusb bulk ". My guess is I used the wrong KDZ files
I would appreciate it if you can help.
Click to expand...
Click to collapse
Honestly, bring the phone to ATT and tell them it said an update was available, and upon accepting it...the phone ended up in this state. They will most likely exchange it for you.
warri said:
Honestly, bring the phone to ATT and tell them it said an update was available, and upon accepting it...the phone ended up in this state. They will most likely exchange it for you.
Click to expand...
Click to collapse
not an option because I bought it from somebody on craigslist... I already bought another one so I'll just wait and see if somebody comes up with a solution if not I'll sell it for parts.
xxxwalo said:
not an option because I bought it from somebody on craigslist... I already bought another one so I'll just wait and see if somebody comes up with a solution if not I'll sell it for parts.
Click to expand...
Click to collapse
Any chance they can give you the original receipt and that way you could possibly send it in for warranty work.
CAG-man said:
It indeed sounds like you have a hard brick, in which case the device can't be brought back to life.
However for chance, and for future reference. Which kdz did you try to flash? Assuming your device is the ATT model, then did you download the Puerto Rico kdz?
Because there is not a KDZ or TOT for the ATT H810 model the Puerto Rico KDZ from Claro will recover an ATT soft brick. These are labeled H810PR.
Click to expand...
Click to collapse
Yep that what I did now I need help
---------- Post added at 07:47 PM ---------- Previous post was at 07:44 PM ----------
Can't some upload the complete eMMC IMAGE for the lg g4 at&t to see we can't this to work thanks
same here
i have the same problem any solucions yet?
CAG-man said:
It indeed sounds like you have a hard brick, in which case the device can't be brought back to life.
However for chance, and for future reference. Which kdz did you try to flash? Assuming your device is the ATT model, then did you download the Puerto Rico kdz?
Because there is not a KDZ or TOT for the ATT H810 model the Puerto Rico KDZ from Claro will recover an ATT soft brick. These are labeled H810PR.
Click to expand...
Click to collapse
Sir my lg g4 ATT start problem of bootlooping on factory (stock) rom .yesterday night when i was playing game on it automatically it restarted and starting this problem..
Can i fix it by installing H810PR kdz to my lg g4 H810.
Can this H810PR kdz hardbrick my ATT lg g4? ?
possible to fix
Hi able to recover the phone . Just should do what I tell right
First we need a 16GB or larger memory card...
Phone Orginal KDZ/TOT
your Phone EMMC Dump
please tell how what software are you using and step by step please
---------- Post added 10th January 2017 at 12:00 AM ---------- Previous post was 9th January 2017 at 11:58 PM ----------
regtoyme said:
Hi able to recover the phone . Just should do what I tell right
First we need a 16GB or larger memory card...
Phone Orginal KDZ/TOT
your Phone EMMC Dump
Click to expand...
Click to collapse
did it worked for h810?
its work on lg h810 At&t
first thing is that you need a backup.img of mmcblk partition from running h81020n firmware (Because DOwngrade baeband not support)
you just follow the step to create backup.img
https://forum.xda-developers.com/att-g4/general/att-h810-qualcomm-hs-usb-qdloader-9008-t3539554
http://gsmmarhaba.com/threads/unbrick-lg-g4-brick-hs-usb-qdloader-9008-without-box.612/
Plz someone provide backup file
please someone give backup file who are using rooted lollipoopp
Hi. I'm lost. I've bricked my freshly purchased H950 because of being in haste to update the firmware to 5.1.1. I've accidentally installed a H955 KDZ over my stock 5.0.1 AT&T H950 firmware. As expected, the device is bricked (everything works except the cell network). I've tried everything, spent about 8 hours with no result. Can't root it as well.
The IMEI and Baseband status is "Unknown" (lost EFS partitions).
Please, if it;s possible, give me an advice how to restore it to its original ATT firmware. I know that ATT hasn't published the TOT file of their firmware. Maybe I could restore it using someone's backed up files?
I'm outside of the US for the next 7 months so I won't be able to return it
Please help me, this is urgent.
okornel said:
Hi. I'm lost. I've bricked my freshly purchased H950 because of being in haste to update the firmware to 5.1.1. I've accidentally installed a H955 KDZ over my stock 5.0.1 AT&T H950 firmware. As expected, the device is bricked (everything works except the cell network). I've tried everything, spent about 8 hours with no result. Can't root it as well.
The IMEI and Baseband status is "Unknown" (lost EFS partitions).
Please, if it;s possible, give me an advice how to restore it to its original ATT firmware. I know that ATT hasn't published the TOT file of their firmware. Maybe I could restore it using someone's backed up files?
I'm outside of the US for the next 7 months so I won't be able to return it
Please help me, this is urgent.
Click to expand...
Click to collapse
Well the good new is that your cell phone works so it is not brick. Cell network probably doesnt work because H955 use different bands than H950. I dont think you will be able to go back to ATT rom because like you mentioned there is no kdz for it. But on the bright side you can try to use the H950PR KDZ to flash your cell. this is totally compatible with the H950 from ATT. You can always wait for the someone more knowledgeable to answer but I am almost sure that it should work.
http://forum.xda-developers.com/g-flex2/general/kdz-compatible-att-h950-t3180847
I've installed the h950pr and there the cell network is still not working
In case if i find a person who has a similar device with Att firmware, how can i make a backup of it in order to flash my device?
I've managed to root my semi-bricked H950. But the imei and baseband version are still unknown. What should I do?
baseband ok. just the imei has 0 value. help please
okornel said:
baseband ok. just the imei has 0 value. help please
Click to expand...
Click to collapse
follow THIS guide and you should be ok.
Use your own imei embedded in the back of the phone or the original box.
Alex_XV6700 said:
follow THIS guide and you should be ok.
Use your own imei embedded in the back of the phone or the original box.
Click to expand...
Click to collapse
tried that, but i get stuck. when adding my port in QPST it says "No phone".
https://onedrive.live.com/redir?res...authkey=!AD1mJswhhQlnJMM&v=3&ithint=photo,png
okornel said:
tried that, but i get stuck. when adding my port in QPST it says "No phone".
https://onedrive.live.com/redir?res...authkey=!AD1mJswhhQlnJMM&v=3&ithint=photo,png
Click to expand...
Click to collapse
Check your PM.
Does anybody know how to write IMEI on the H950 without octopus box? Can't do it in QPST, DFS, EFS pro because it sn't recognized as a phone / doesn't answer.
Everything works, I can even make calls, just the imei value is 0.
Finally I did it!!!
okornel said:
Finally I did it!!!
Click to expand...
Click to collapse
Did you use qpst? Or which tool?
Alex_XV6700 said:
Did you use qpst? Or which tool?
Click to expand...
Click to collapse
Yeah. I used QPST. I had to open cmd, enter "adb shell", then " su", then "echo 1 > /sys/devices/platform/lg_diag_cmd/diag_enable". After that you can backup Nv via QPST.
Im glad you informed yourself and solved your own issue. ?
I need your help please , what happens is that my phone imei = 0 in android system, in fastboot imei shows Correctly, i flashed MM stock and 5.1.1, but still the same problem, any solution?
7ak170 said:
I need your help please , what happens is that my phone imei = 0 in android system, in fastboot imei shows Correctly, i flashed MM stock and 5.1.1, but still the same problem, any solution?
Click to expand...
Click to collapse
Did you use fastboot erase all ?
Mendelyeev said:
Did you use fastboot erase all ?
Click to expand...
Click to collapse
Yes I did, yet I have wifi and bluetooth mac.
7ak170 said:
Yes I did, yet I have wifi and bluetooth mac.
Click to expand...
Click to collapse
Sorry friend.. You erased your imei partition. I did the same thing on my XT1543 four months ago, and until now, didn't find solution. I am using it as a tablet.
Mendelyeev said:
Sorry friend.. You erased your imei partition. I did the same thing on my XT1543 four months ago, and until now, didn't find solution. I am using it as a tablet.
Click to expand...
Click to collapse
I wanted to be "smart" and taped "fastboot erase all" instead of doing it more than once "as it should be done". Guess I erased my IMEI too (on XT1541). Hope someone will come with a solution like those for MTK devices. Also using my phone as a tab/mp3 player.
Thanks
TTof01 said:
I wanted to be "smart" and taped "fastboot erase all" instead of doing it more than once "as it should be done". Guess I erased my IMEI too (on XT1541). Hope someone will come with a solution like those for MTK devices. Also using my phone as a tab/mp3 player.
Thanks
Click to expand...
Click to collapse
I got my cellphone signal back. Up to now, I can make and receive calls and SMS, but not connect on cellular data network. I flashed brazilian radio/modem.
If your IMEI is 0, you don't have any real option but to have it repaired. You should contact Moto customer service, there is nothin you can do to restore the IMEI to your device.
Mendelyeev said:
I got my cellphone signal back. Up to now, I can make and receive calls and SMS, but not connect on cellular data network. I flashed brazilian radio/modem.
Click to expand...
Click to collapse
if u can register into a cellular network and send/receive SMS that means that u changed ur 0 IMEI. If i quite understand, this binary file that u flashed into your device did that task (of updating IMEI) ?
Can u give put the link plz?
Thanks!
---------- Post added at 12:35 AM ---------- Previous post was at 12:31 AM ----------
acejavelin said:
If your IMEI is 0, you don't have any real option but to have it repaired. You should contact Moto customer service, there is nothin you can do to restore the IMEI to your device.
Click to expand...
Click to collapse
Repair means writing a new IMEI in the device NVM.
As it was written/deleted the first time it can be refreshed again, just need to find the IMEI @ in the NVM (quite easy to say u'll tell me).
Do you have any idea how much Moto customer service charges that ?
Thanks
Hello bro idk if it's useful but u can use Xposed Framework's "IMEI CHANGER" modules.. Maybe those help..! Also try flashing modem images again..!
Forever Alone said:
Hello bro idk if it's useful but u can use Xposed Framework's "IMEI CHANGER" modules.. Maybe those help..! Also try flashing modem images again..!
Click to expand...
Click to collapse
Thanks bro! The thing is that i'm on Marshmallow that cannot be rooted yet, if u got a clue on how to root it please let us know!
Does flashing the modem allows to change the IMEI ? is there a trick like hacking the source of the modem image and compiling it with a specific IMEI ?
TTof01 said:
Thanks bro! The thing is that i'm on Marshmallow that cannot be rooted yet, if u got a clue on how to root it please let us know!
Does flashing the modem allows to change the IMEI ? is there a trick like hacking the source of the modem image and compiling it with a specific IMEI ?
Click to expand...
Click to collapse
Pls unlock bl and install twrp.. Then install the supersu zip n try Xposed thing..
TTof01 said:
Thanks bro! The thing is that i'm on Marshmallow that cannot be rooted yet, if u got a clue on how to root it please let us know!
Does flashing the modem allows to change the IMEI ? is there a trick like hacking the source of the modem image and compiling it with a specific IMEI ?
Click to expand...
Click to collapse
If you flash modem files for your device , you will get back your imei and baseband, I already got by this.
Mendelyeev said:
Sorry friend.. You erased your imei partition. I did the same thing on my XT1543 four months ago, and until now, didn't find solution. I am using it as a tablet.
Click to expand...
Click to collapse
change the card was my solution , my xt1543 16gb now a xt1540 8gb
Hi All,
I have a P40 Pro which i upgraded to 10.1.0.155 firmware.
after the instalation the phone keeps rebooting after every 20seconds.
I tried:
* reset
*hard reset
*downgrade or upgrade with HiSuite but the phone keeps rebooting so unable to do nothing
*using memory card /OTG no matter if i user firmware.114 or .154 it says that the firmware is not for this device, but it is
*using safe mode keeps rebooting
*using eRecovery i get message that no firmware found
I updated the apps.
I tried to disable and uninstall what is not required.
But everytime after 20 seconds the phone keeps rebooting.
Does anyone knows any fix?
Or from where to download firmware 10.1.0.155 or higher to try?
most likely, if you updated via hisuite.proxy or did a rollback, you installed the wrong firmware. i had the same problem. none of the methods helped me to fix the problem. only the replacement of the motherboard in the service center helped.
KINGZ_ said:
most likely, if you updated via hisuite.proxy or did a rollback, you installed the wrong firmware. i had the same problem. none of the methods helped me to fix the problem. only the replacement of the motherboard in the service center helped.
Click to expand...
Click to collapse
replacement of the motherboard? really??
hardware failed if software?
damn.. anyway it will be retuned to seller because i only have it for 2 weeks.
thanks for the reply!
cheers
accidently installed wrong version of OS even Firmware Finder approved it for installation, now my mobile reboots after every 20 seconds ....
any solution ????
Hi guys
Did you find a solution to share for this issue??
Thanks
catalinprocovanu said:
Hi guys
Did you find a solution to share for this issue??
Thanks
Click to expand...
Click to collapse
U May repair your imei with à Paid software like MRT dongle tool or sigmakey tool
if u check iemi u find your imei null
hafid69 said:
U May repair your imei with à Paid software like MRT dongle tool or sigmakey tool
if u check iemi u find your imei null
Click to expand...
Click to collapse
Is this possible? How to connect the phone if is restarting every 2 min?
go to Huawei service center and change motherboard if its under warranty, it will be free of charge .... till now only this is the solution.
SImilar issue here, I did all step by step with all the care, and phone got bricked
and then try multiple steps to recover it back with not success.
Huawei refused to repair it. Was sent back
catalinprocovanu said:
Huawei refused to repair it. Was sent back
Click to expand...
Click to collapse
What really? I'm about to call the after sale. What did you say to them?
grand_deluxe said:
What really? I'm about to call the after sale. What did you say to them?
Click to expand...
Click to collapse
I've used the collection service but sadly, the phone was sent back as the fault is caused by "unauthorised repairs or modification of the software".
catalinprocovanu said:
I've used the collection service but sadly, the phone was sent back as the fault is caused by "unauthorised repairs or modification of the software".
Click to expand...
Click to collapse
Can I ask you what did you say when you give the phone to them? Did u say you used third party software? Did u say u tried to install new version or try to downgrade new version?
I'm in the position as you. I'm sending an email to my retailer. I will give you more updates.
Hi mate
This service doesn't involve speaking to anyone. Huawei will organise DHL to collect and return. That's it.
Nobody will call or speak to you. They sent me a form back saying that the phone won't be repaired under warranty because of "unauthorised repair or modification of software"
Nothing else.
that's not good.
I'm from Costa Rica and got the phone from Movistar Telefonica.
They accepted my phone to be checked and the Repair Center replaced the mainboard to fix the issue. I did not tell them what I did, but finally, I got my phone repaired and with the bonus of EMUI 10.1.0 (10.1.0.109) so I can now install Googlefier.
Mine went to insurance however I'm under the impression that was bad luck as most of the other people contacting CS had their mobile repaired under warranty. This is what it's...
Hello so I was using the phone as casual but suddenly during some call the phone cut off and there was no signals or sim card showing so I check the call app and check the IMEI and it was null I don't know how this happened so I reinstall firmware even factory reset but couldn't fix it so plz somebody help me to fix this phone imei the phone is rooted by magisk but twrp is not installed so plz help me what do I do...
If you haven't backed up the /EFS and/or /NVRAM partition where phone's IMEI is stored before re-flashing phone's Stock ROM then you have lost, unless you have the box at your hands with which phone has been delivered: IMEI should be printed on there.
pakwarrior said:
Hello so I was using the phone as casual but suddenly during some call the phone cut off and there was no signals or sim card showing so I check the call app and check the IMEI and it was null I don't know how this happened so I reinstall firmware even factory reset but couldn't fix it so plz somebody help me to fix this phone imei the phone is rooted by magisk but twrp is not installed so plz help me what do I do...
Click to expand...
Click to collapse
I have a ta-1188 variant too and after bootloader unlocking I lost my imei and I managed to fix it by using a tool called modem meta
jwoegerbauer said:
If you haven't backed up the /EFS and/or /NVRAM partition where phone's IMEI is stored before re-flashing phone's Stock ROM then you have lost, unless you have the box at your hands with which phone has been delivered: IMEI should be printed on there.
Click to expand...
Click to collapse
no imei doesn't go to null after unlocking bootloader it was i donno disappear during a call then after it i never see the imei on phone by typing *#06# it was nothing other than serial number not even null
also i saved and have phones box so no worries about imei number bro all i need in this is how to get my imei back fix so i can use it
jwoegerbauer said:
If you haven't backed up the /EFS and/or /NVRAM partition where phone's IMEI is stored before re-flashing phone's Stock ROM then you have lost, unless you have the box at your hands with which phone has been delivered: IMEI should be printed on there.
Click to expand...
Click to collapse
no imei doesn't go to null after unlocking bootloader it was i donno disappear during a call then after it i never see the imei on phone by typing *#06# it was nothing other than serial number not even null
also i saved and have phones box so no worries about imei number bro all i need in this is how to get my imei back fix so
areallydumbperson said:
I have a ta-1188 variant too and after bootloader unlocking I lost my imei and I managed to fix it by using a tool called modem meta
Click to expand...
Click to collapse
i will check it and tell you wut happens btw thnx for replying other guy also thnx for replying
pakwarrior said:
no imei doesn't go to null after unlocking bootloader it was i donno disappear during a call then after it i never see the imei on phone by typing *#06# it was nothing other than serial number not even null
also i saved and have phones box so no worries about imei number bro all i need in this is how to get my imei back fix so
i will check it and tell you wut happens btw thnx for replying other guy also thnx for replying
Click to expand...
Click to collapse
I did an incorrect read back in sp tool and lost my imei and sn
areallydumbperson said:
I did an incorrect read back in sp tool and lost my imei and sn
Click to expand...
Click to collapse
i will make sure everything thnx
areallydumbperson said:
I have a ta-1188 variant too and after bootloader unlocking I lost my imei and I managed to fix it by using a tool called modem meta
Click to expand...
Click to collapse
bro i tried all version its one version its stucks to 79% and in other version it stucks to 99% plz help
pakwarrior said:
bro i tried all version its one version its stucks to 79% and in other version it stucks to 99% plz help
Click to expand...
Click to collapse
look in device manager for missing drivers
areallydumbperson said:
look in device manager for missing drivers
Click to expand...
Click to collapse
like can you tell me which which driver i have to install that will be great help sir
areallydumbperson said:
look in device manager for missing drivers
Click to expand...
Click to collapse
here check this this error comes ater 79% is done and here is the device manager i think i installed all drivers
pakwarrior said:
here check this this error comes ater 79% is done and here is the device manager i think i installed all drivers
Click to expand...
Click to collapse
hmm the drivers have a yellow exclamation mark
areallydumbperson said:
hmm the drivers have a yellow exclamation mark
Click to expand...
Click to collapse
cuz they are unsigned driver
pakwarrior said:
cuz they are unsigned driver
Click to expand...
Click to collapse
try installing some signed drivers im afraid that it might not be used because of the driver being unsigned
areallydumbperson said:
try installing some signed drivers im afraid that it might not be used because of the driver being unsigned
Click to expand...
Click to collapse
hmm i will check if i find some
If Windows Device Manager shows you an unusable driver is installed then this has nothing to do whether driver is signed or not. It simply means the driver isn't suitable.
You have to install the USB-driver suitable to your NOKIA device:
Download Nokia USB Driver for Windows (Latest Driver)
Download the latest and original Nokia USB Driver to quickly connect any Nokia Smartphone and tablet to the Windows Computer.
androidmtk.com
jwoegerbauer said:
If Windows Device Manager shows you an unusable driver is installed then this has nothing to do whether driver is signed or not. It simply means the driver isn't suitable.
You have to install the USB-driver suitable to your NOKIA device:
Download Nokia USB Driver for Windows (Latest Driver)
Download the latest and original Nokia USB Driver to quickly connect any Nokia Smartphone and tablet to the Windows Computer.
androidmtk.com
Click to expand...
Click to collapse
ok I understood i will try it and tell you thnx
areallydumbperson said:
I did an incorrect read back in sp tool and lost my imei and sn
Click to expand...
Click to collapse
can you help me the software is stucking at 99% please help !!
pakwarrior said:
Hello so I was using the phone as casual but suddenly during some call the phone cut off and there was no signals or sim card showing so I check the call app and check the IMEI and it was null I don't know how this happened so I reinstall firmware even factory reset but couldn't fix it so plz somebody help me to fix this phone imei the phone is rooted by magisk but twrp is not installed so plz help me what do I do...
Click to expand...
Click to collapse
Did you git solution as i download firmware from this website :
jwoegerbauer said:
If Windows Device Manager shows you an unusable driver is installed then this has nothing to do whether driver is signed or not. It simply means the driver isn't suitable.
You have to install the USB-driver suitable to your NOKIA device:
https://androidmtk.com/download-nokia-usb-drivers-nutshell
Click to expand...
Click to collapse
It stuck at 50% and then show error.
pakwarrior said:
can you help me the software is stucking at 99% please help !!
Click to expand...
Click to collapse
Driver fault probably