Yuphoria stuck on yu logo - YU Yuphoria

I tried to solve the problem by your previous solutions by downloading all the files...after starting flash all batch file in command window it is not moving forward from "sending 'boot' command, I waited for more than hour but flashing not completed. Please help me out to recover my phone.

shash.hn said:
I tried to solve the problem by your previous solutions by downloading all the files...after starting flash all batch file in command window it is not moving forward from "sending 'boot' command, I waited for more than hour but flashing not completed. Please help me out to recover my phone.
For your reference I am attached image of command window
Click to expand...
Click to collapse

Related

[Q] wifi Xoom 3.1 unlocking bootloader error...

I've followed all the guides to a T. and my SDK is able to run nicely. However, once I've made contact w/ my device in 'usb debugging mode', tested the connection w/ "adb devices" in command prompt, and set the device to bootloader w/ the "adb reboot bootloader" command, and finally I give it the command to "fastboot oem unlock", I get an unknown error!! Please help. I have all the path variables set, and my SDK is running good, and has all the newest updates.
This is a link to a video I made of the problem. Please watch. It'll help if you can see the problem! just copy and paste - youtube.com/watch?v=2bROUZh7GRI
Thanks for your responses. I hope they come quickly!
V0nice said:
I've followed all the guides to a T. and my SDK is able to run nicely. However, once I've made contact w/ my device in 'usb debugging mode', tested the connection w/ "adb devices" in command prompt, and set the device to bootloader w/ the "adb reboot bootloader" command, and finally I give it the command to "fastboot oem unlock", I get an unknown error!! Please help. I have all the path variables set, and my SDK is running good, and has all the newest updates.
This is a link to a video I made of the problem. Please watch. It'll help if you can see the problem! just copy and paste - youtube.com/watch?v=2bROUZh7GRI
Thanks for your responses. I hope they come quickly!
Click to expand...
Click to collapse
Ok. I'm unlocked now. New problem... >.< There's always something!! now when I try to flash the recovery image, I get an unknown error.
"C:\AndroidSDK\tools>fastboot flash recovery recovery-Tiamat-R4c-100611-1150-cwm.
img
sending 'recovery' (3998 KB)...
FAILED (command write failed (Unknown error))
finished. total time: 0.636s
C:\AndroidSDK\tools>"
Anyone recognize why it would do this?
V0nice said:
Ok. I'm unlocked now. New problem... >.< There's always something!! now when I try to flash the recovery image, I get an unknown error.
"C:\AndroidSDK\tools>fastboot flash recovery recovery-Tiamat-R4c-100611-1150-cwm.
img
sending 'recovery' (3998 KB)...
FAILED (command write failed (Unknown error))
finished. total time: 0.636s
C:\AndroidSDK\tools>"
Anyone recognize why it would do this?
Click to expand...
Click to collapse
just copy and paste the command from the OP's instructions. I used the new Clockwork in the thread and just renamed it... which method are you using. I just did mine last Thursday with no issues. I used this method http://forum.xda-developers.com/showthread.php?t=1078019
HTML:
adb reboot bootloader
fastboot flash recovery recovery-Tiamat-R4c-100611-1150-cwm.img
fastboot reboot
Make sure you have the latest fastboot.exe and if all else fails start from the beginning again. Now you are sure your fastboot is unlocked....
playya said:
just copy and paste the command from the OP's instructions. I used the new Clockwork in the thread and just renamed it... which method are you using. I just did mine last Thursday with no issues. I used this method http://forum.xda-developers.com/showthread.php?t=1078019
HTML:
adb reboot bootloader
fastboot flash recovery recovery-Tiamat-R4c-100611-1150-cwm.img
fastboot reboot
Make sure you have the latest fastboot.exe and if all else fails start from the beginning again. Now you are sure your fastboot is unlocked....
Click to expand...
Click to collapse
I did just copy and paste it, and i got that error message.
V0nice said:
I did just copy and paste it, and i got that error message.
Click to expand...
Click to collapse
Did you try to do the fastboot unlock again
How did you manage to get unlock to work? Perhaps if you gave us more info on what you did?

[Q] Phone only starts in AP Fastboot after flash failure!

Hi,
Can someone please tell me how to repair this? I was trying to flash a new boot logo via moto fastboot and it accepted the logo.bin but failed writing the new file. My phone will only start to AP Fastboot and it says at the bottom: "Fastboot Reason: Flash Failure".
How do I correct this? Thanks in advance and your help is appreciated
Deckard_9732 said:
Hi,
Can someone please tell me how to repair this? I was trying to flash a new boot logo via moto fastboot and it accepted the logo.bin but failed writing the new file. My phone will only start to AP Fastboot and it says at the bottom: "Fastboot Reason: Flash Failure".
How do I correct this? Thanks in advance and your help is appreciated
Click to expand...
Click to collapse
Sorry to hear you are having problems. Can you please try to flash using this file.
http://forum.xda-developers.com/showthread.php?t=2161855
Let me know how it goes.
Brad
Thanks for the quick reply! Here is some more info
"This utility changes the Motorola boot logo before the boot animation.
Make sure you are in AP Fastboot mode before you begin
Enjoy!
Press any key to continue . . .
sending 'logo.bin' (854 KB)... OKAY [ 0.109s]
writing 'logo.bin'... INFOInvalid partition name logo.bin
FAILED (remote failure)
rebooting...
Which option should I try in the tools?
OMG...Thank you so much for the link and correcting my issue!!!!!
I used #2 to reflash the Flash_Moto_Logo.bat and it worked perfectly...
I will pass this along if I see someone else who is in need.
Deckard_9732 said:
OMG...Thank you so much for the link and correcting my issue!!!!!
I used #2 to reflash the Flash_Moto_Logo.bat and it worked perfectly...
I will pass this along if I see someone else who is in need.
Click to expand...
Click to collapse
Thats, ok. Glad I could be of Help.
Brad
Have the same trouble. Can boot only Fastboot / Recovery
Moved to http://forum.xda-developers.com/showthread.php?p=38778968

Stuck In Boot Loop

I used the toolkit to flash the stock CM image as phone is stuck at one plus one logo . Flashing the stock worked without any errors after phone rebooted it's still stuck in bootloop. Is that means phone needs RMA, I can get into fastboot and recovery ..
I think you should come take a peak at my thread. Your issue sounds familiar
http://forum.xda-developers.com/showthread.php?p=55488755
So by issuing these commands
fastboot erase persist
fastboot flash persist persist.img
and flashing OS will fix the bootloop issue ??
I am getting this error " finished. total time: 0.009s
error: failed to load 'cm-11.0-XNPH30O-bacon-signed-fastboot.zip': No such file
or directory" but the file is in the location ..
sguy156 said:
I am getting this error " finished. total time: 0.009s
error: failed to load 'cm-11.0-XNPH30O-bacon-signed-fastboot.zip': No such file
or directory" but the file is in the location ..
Click to expand...
Click to collapse
Did you try rebooting after flashing the persist?
If yes and you still have no is download 38r and flash it instead
https://forums.oneplus.net/threads/38r-factory-images-now-available.147875/

When I try to flash via fastboot system.img to YU Yuphoria I get the following error.

I executed fastboot -i 0x2A96 oem unlock before flashing. I also checked fastboot getvar unlocked so result is following.
>fastboot getvar unlocked
unlocked:
finished. total time: 0.002s*
And one more thing when I flashed cache , userdata , recovery , boot. It is all fine, there is no error. But this error occurs only when i tried to flash system. My Phone was stopped working due some decryption error and internal memory is showing as 0Mb in TWRP. I had followed my threads but no luck.
>fastboot -i 0x2A96 flash system system.img
target reported max download size of 268435456 bytes
erasing 'system'...
OKAY [ 0.018s]
sending sparse 'system' 1/4 (261218 KB)...
OKAY [ 8.737s]
writing 'system' 1/4...
**FAILED (remote: flash write failure)**
finished. total time: 9.167s
Might be Because Of Corrupted Data Partion.
atulsam said:
I executed fastboot -i 0x2A96 oem unlock before flashing. I also checked fastboot getvar unlocked so result is following.
>fastboot getvar unlocked
unlocked:
finished. total time: 0.002s*
And one more thing when I flashed cache , userdata , recovery , boot. It is all fine, there is no error. But this error occurs only when i tried to flash system. My Phone was stopped working due some decryption error and internal memory is showing as 0Mb in TWRP. I had followed my threads but no luck.
>fastboot -i 0x2A96 flash system system.img
target reported max download size of 268435456 bytes
erasing 'system'...
OKAY [ 0.018s]
sending sparse 'system' 1/4 (261218 KB)...
OKAY [ 8.737s]
writing 'system' 1/4...
**FAILED (remote: flash write failure)**
finished. total time: 9.167s
Click to expand...
Click to collapse
It Might Possible That Your Data Partition Has Been Corrupted. Download The Official Cynogen OS Zip. Extract it. In That Look For Data. And In same Folder, Press Shift&Right Click in empty Sapce And Open Command window Here. Connect Your Device In Fasboot Mode. Flash That Data Using command. And then Flash System.img by Normal Method. Hope It will Worked For Yu.
Please see the image attached.
Animdk said:
It Might Possible That Your Data Partition Has Been Corrupted. Download The Official Cynogen OS Zip. Extract it. In That Look For Data. And In same Folder, Press Shift&Right Click in empty Sapce And Open Command window Here. Connect Your Device In Fasboot Mode. Flash That Data Using command. And then Flash System.img by Normal Method. Hope It will Worked For Yu.
Click to expand...
Click to collapse
Please see the following image attached which is shared on drive.
Code:
https://drive.google.com/file/d/0B8Dudx72Yu9iamFLUzZOY1Y1TjQ/view?usp=sharing
atulsam said:
Please see the following image attached which is shared on drive.
Code:
https://drive.google.com/file/d/0B8Dudx72Yu9iamFLUzZOY1Y1TjQ/view?usp=sharing
Click to expand...
Click to collapse
Try Out My Method It Should Be Work.
And rather than Using Original USB Cabel, Use Good Original cabel. Sometimes Original USB Become Loose.
It may not be USB problem.
Animdk said:
Try Out My Method It Should Be Work.
And rather than Using Original USB Cabel, Use Good Original cabel. Sometimes Original USB Become Loose.
Click to expand...
Click to collapse
I am using amazon basics cable , this is not usb problem because data is flashing properly but system is not. And Internal memory showing as 0 Mb in TWRP, but SdCard is showing as it is.
I downloaded official tool kit and OS . I tried with two different img but result is same for both.
atulsam said:
I am using amazon basics cable , this is not usb problem because data is flashing properly but system is not. And Internal memory showing as 0 Mb in TWRP, but SdCard is showing as it is.
I downloaded official tool kit and OS . I tried with two different img but result is same for both.
Click to expand...
Click to collapse
Do Yu Tried For The Flasing Of Only Data Partition, It Might Fix Your Problem.....Otherwise, Sorry Bro....I don't Have Any Further Knowledge About This....
Animdk said:
Do Yu Tried For The Flasing Of Only Data Partition, It Might Fix Your Problem.....Otherwise, Sorry Bro....I don't Have Any Further Knowledge About This....
Click to expand...
Click to collapse
Yes I have tried that , data is flashing successfully. Since there is no system flashing so cant start my phone.
I am having the exact same problem
how did you resolve the issue
BOTDeveloper said:
I am having the exact same problem
how did you resolve the issue
Click to expand...
Click to collapse
Sorry, I did not solve yet.
How did it happened?? I'm scared if i overcome this. Cuz recently i unbricked my device from dead hardbrick
exact same issue
atulsam said:
Sorry, I did not solve yet.
Click to expand...
Click to collapse
exact same problem here please update here if you abe to fix it.
Same problem.............. Is there no one from this group to help us........... :'(
Same Probelm
Please someone help , if you have resolved the same . TIA
Guys ..ur problem solved ? Post reply
@ Heartstoler1991 - Not yet .. Please help someone ..
Same problem. Please share the solution if anyone solved it.
I found a pretty easy method but it doesn't let me post the link so send a mail to [email protected] and I give you the link!
Edit: it finally let me post it: https://forum.xda-developers.com/yu-yuphoria/help/bricked-t3174710
Good luck mates
Razor10707 said:
I found a pretty easy method but it doesn't let me post the link so send a mail to [email protected] and I give you the link!
Edit: it finally let me post it: https://forum.xda-developers.com/yu-yuphoria/help/bricked-t3174710
Good luck mates
Click to expand...
Click to collapse
Tried this method already.
Doesn't work, it gives the same exact error.
I have same problem
help me any body any solution

OnePlus 6 No OS No TWRP, stuck on fastboot screen

Hello,
I'm a young user of a OP6, I did root it well, installed TWRP but everything ****ed up when I did erase everything w/ TWRP.
My situation now: No OS, no TWRP, stuck on fastboot mode.
What I've tried:
1- Flashing TWRP.img again, getting this error code :
C:\WINDOWS\system32>fastboot flash recovery "D:\Users\Documents\Rooter\twrp-3.2.3-1-enchilada.img"
target reported max download size of 536870912 bytes
sending 'recovery' (28728 KB)...
OKAY [ 0.618s]
writing 'recovery'...
FAILED (remote: (recovery_b) No such partition)
finished. total time: 0.624s
2- Tried to write it on boot_b (fastboot flash boot_b twrp-3.2.3-1-enchilada.img)
Works but while booting getting :
C:\WINDOWS\system32>fastboot boot "D:\Users\Documents\Rooter\twrp-3.2.3-1-enchilada.img"
downloading 'boot.img'...
OKAY [ 0.620s]
booting...
FAILED (remote: Failed to load/authenticate boot image: Load Error)
finished. total time: 0.641s
3- Same steps with OP6 OS, same problems
I'm stuck and begging for help (french/english) and not a simple redirect.
I can't access to adb devices and neither to /sdcard/ .
Thanks a lot for your advices to save my phone
Reyz
Reyzhia said:
Hello, I'm a young user of a OP6,.........
Click to expand...
Click to collapse
I don't have this device but, I believe that one or more of the following threads should be helpful for what you are looking for that's specific to your device. Don't be afraid to ask for some member guidance within one of them too.
https://forum.xda-developers.com/showthread.php?t=3851802
https://forum.xda-developers.com/showthread.php?t=3828416
https://forum.xda-developers.com/showthread.php?t=3792643
https://forum.xda-developers.com/showthread.php?t=3796051
Good Luck!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my SM-G900T device.
Ibuprophen said:
I don't have this device but, I believe that one ..
Click to expand...
Click to collapse
Thanks you much for your reply, I did set my slot on A and i m now trying to reboot normally (it s taking long but wil wait 1/2 h), I dont really know if I should flash TWRP..
Reyzz
Reyzhia said:
Thanks you much for your reply, I did set my slot on A and i m now trying to reboot normally (it s taking long but wil wait 1/2 h), I dont really know if I should flash TWRP..
Reyzz
Click to expand...
Click to collapse
Closing thread, my phone is alright now
Thanks for helping <3
Reyz
Reyzhia said:
Closing thread, my phone is alright now
Thanks for helping <3
Reyz
Click to expand...
Click to collapse
Hey how do u solve it? i have the same problem as you,
Thanks,
Best Regards,
Haikal Rahman
xxhyekal said:
Hey how do u solve it? i have the same problem as you,
Thanks,
Best Regards,
Haikal Rahman
Click to expand...
Click to collapse
I hope you've solved the problem by now, but if not, you can use fastboot to load twrp directly by typing
fastboot boot twrp.img
(replace twrp.img with the actual filename).
Once twrp loads, you can sideload or use adb push to transfer the twrp.img file to the phone and install it from twrp.
You don't flash the twrp.img file ... instead boot twrp.img temporarily .... 'fasboot boot twrp.img' ... then you can flash the zip file in TWRP
Go to this post to unbrick your device
https://forum.xda-developers.com/oneplus-6/how-to/op6-collection-unbrick-tools-t3914109
Good luck

Categories

Resources