Hi,
Today i got stuck updating my rotted E6653.
So i used EMMA with the latest firmware to resque.
Everything wokrs fine the Z5 botted like it should in the first steps guide.
But i got sick of it and turned of the phone in mind to restore my twrp backup.
But from now it seems the bootloader is corrupted and if i plug the phone to the an energy source the Satus LED flashs RED.
I already read it could only be fixed with a new motherboard.
Is that wright?
And why in the hell quit the first steps into bricks my device?
Yep. I work in telephone repair service and i know red led mean dead motherboard.
I gave it today to my Vodafone store.
I hope Sony will fix it and in case they don´t the insurance should do it,
Related
hi guys I want to ask something regarding my phone state
I got stuck with endless bootloop, when I turn on my z3 it shows red led and sony logo then proceed to reboot again,
charging also seems not working because when I insert the cable it always proceed to state that I mentioned earlier
(sony logo endless reboot etc) and not showing charging animation like it supposed to be
Just to let you know I got UBL and seems to have working fastboot and recovery mode,
also flashing with emma + flashtool not working it shows no error when flashing but my problem still persists ,
any idea how to fix my phone? any answers are appreciated, and thanks
Hello!
I recently flashed my Moto G with the unofficial LineageOS 16 rom by allstargaurav. Kudos to him for his work.
I unlocked my bootloader, got TWRP, flashed the rom, flashed Gapps,Magisk and started using it normally.
One night, after using it with the battery at 30%, I left it as it was and did not charge it.
The next day, I saw that it was not booting up at all. I plugged it in and the white led light started and did not go off.
The light was constantly on. I searched on google to no avail.
Nothing works and I have pressed the power button and power+volume down for more than 5 minutes.
I cant get to the fastboot menu or the TWRP, the phone doesnt power on at all so I cant do anything or get a logcat.
Please help!!!!
I also got the watchdogs boot animation. That is all I have modified.
Please tell me what is wrong and how to rectify it.
Please help quickly.
I am at wit's end and helpless. I should also mention that this was my first time flashing a rom on any device, but I followed the instructions very carefully.Before this the phone was on stock Lollipop rom, stock recovery and locked bootloader.
Thanking anyone who helps or even replies in advance.
:crying::crying::crying::fingers-crossed::fingers-crossed:
Also
Alphacube111 said:
Hello!
I recently flashed my Moto G with the unofficial LineageOS 16 rom by allstargaurav. Kudos to him for his work.
I unlocked my bootloader, got TWRP, flashed the rom, flashed Gapps,Magisk and started using it normally.
One night, after using it with the battery at 30%, I left it as it was and did not charge it.
The next day, I saw that it was not booting up at all. I plugged it in and the white led light started and did not go off.
The light was constantly on. I searched on google to no avail.
Nothing works and I have pressed the power button and power+volume down for more than 5 minutes.
I cant get to the fastboot menu or the TWRP, the phone doesnt power on at all so I cant do anything or get a logcat.
Please help!!!!
I also got the watchdogs boot animation. That is all I have modified.
Please tell me what is wrong and how to rectify it.
Please help quickly.
I am at wit's end and helpless. I should also mention that this was my first time flashing a rom on any device, but I followed the instructions very carefully.Before this the phone was on stock Lollipop rom, stock recovery and locked bootloader.
Thanking anyone who helps or even replies in advance.
:crying::crying::crying::fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
Being unsure what the problem is, I also followed FabioSan's guide on unbricking the phone, but I got stuck on the part where we go to the device manager console as my PC would not recognise the phone no matter what I did.
Also, the warranty has expired long ago as the phone was bought in 2014 and it was only a 1year warranty.
Therefore, I am considering giving the phone to the moto support centre. I will also try replacing the battery as it may be a battery problem considering my symptom of the white light does not fit any hardbricked phone's symptoms. Will notify if it works.
Till then, please help and suggest what the problem might be.
Hello there. I own a Z3 model D6603. It is unlocked bootloader and Before it had got the bootloop i had Lineage OS 16 custom rom installed on it (Android 9). I was watching some videos on chrome and then the phone heated a little and then restarted. I thouhgt it was maybe some sort of instability but then it started just bootlooping.
Current Status right now is :
Once connected to pc goes to flash mode.
I can get it to fastboot.
When connected to charger just goes into endless bootloop where only SONY logo appears and then quickly restarts
In attempt to fix it I flashed stock FTF using multiple versions of Flashtool which was fruitless. I also Tried with EMMA but nothing helped still. And then after looking I think it might be damaged TA and I've seen so many say that if that's the case then the phone is bricked forever unless you have had a backup from a previous working state which I actually do. The problem is that I don't know how to flash this TA back since the phone doesn't boot to restore it through ADB. I saw that S1tool works with older devices and doesn't work with Z3 models so I wonder if there is a way to fix this. Thank you for your time.
PS : My power button doesn't work I used to use fastboot to boot it when necessary
Issues of that kind may be a hint for a dead battery, this should be ruled out first. Note: In that case your phone might not boot even if connected to a charger!
After that is ruled out, one should try to install LineageOS 16 or later following the official installation routine from scratch.
Hi team, how are u doing?
Happy new year for everyone, and I hope everybody gets very well in this year.
So I've came to try as last chance to recover my old Z5. This phone I gave to my mom and she uses every day and she loves
But a few weeks ago she tells me the phone start appear some glitches in camera, the battery discharge too fast...
My father goes to a phone center and change the battery and after that the phone don't turn it on anymore, just blinked 3 red lights and shut off.
I tooked the phone and trye to recover as I mentioned the phone was old version of some custom ROM from this forum and with all my old old knowledge hehe I've tryed to recover through TWRP but nothing happens.
So I came back to this forum and start read all the information again and how we can resolve this.
I already did:
1-wipe entire cellphone (wipe data, system, cache, kernel)
2-flahs old stock roms, and lastest stocked roms
3-I've BL locked again to try to use the Xperia Companion repair.
All this I've already did and nothing turn it back. The difference until now I could look is: "now the phone starts with xperia logo and after that android logo start loading and boot again blinking 3 red lights.
I can easy enter into flash mode and fastboot mode.
What I'm trying to do:
BLU unlocked again (I can't flashtool shows me an error "cant find loading.sin .. bla bla bla")
I've downloaded the EMMA Tool (it's the same of flashtool but created by SONY I guess - but I can't use because my BL it's locked and I don't know how to unlocked again.
I dont know if its the battery, because the phone appear to start turn on again, I think it's a software brick .. but I really don't know what I need to do.
Somebody can help me?
OH (unfortunally we have in this forum old tutorials and some of them are off already ... so it's being very hard to get more info to do this.)
I hope some kindless soul could help me in this revival
Wish you best!
Anyone?
Hi guys,
Hope someone can give me some light about diagnosing flash memo device hardware damage.
I have an OnePlus 6 A6003 that entered for sudden in CrashDump Mode. It stopped to run the OS, although the bootloader mode still worked.
Guided by some tutorials I tried to unlock trough fastboot and adb in CMD panel without success in unlocking the device.
After that, I started trying Msm Downloading tool to flash a Oxygen firmware and make it brand new. I couldn't.
The process stopped somehow in the middle of downloading to system_a. I lost hope big time here and went to SMT flashing. The tutorial advised that i could lose IMEI if i did not backed up my EFS. I didn't, but i figured i could use some downloaded backup and change my IMEI back to original, as I have the original box and data of the phone. I did it and the process of flashing the device stopped the same spot it did before.
From there I repeated the process in loop until finally I got it done. Once the original oxygen firmware was succefully flashed I was happy, till i discovered the phone still doesn't turn on. it always blurs the initial logo screen after some seconds and freezes.
At this point I think there is some hardware problem at the flashdrive device. Anyone have any idea if this still can be a software problem or can assure me how i could definitly diagnose it?
I 'd be thankful with any help.