Database Info

Restore files problem

Discoverd today that my videocamera map in Quickpic was lost, must be deleted in some way
My OPO is not rooted.
So when Im connecting my OPO to my PC it finds the telephone but not as e:,f:... It find the device name, so Recuva or ohter recoveryprograms wont recognize it.
So I downloaded this https://www.recovery-android.com/oneplus-phone-photo-recovery.html
The problem is when Im going to use this program is that the phone restart itself all the time.
I have read that it is much easier to recover files while OPO is root, but I find to problems:
1. If I root the phone all data will be erased.
2. If I root some programs might overwrite lost data...
Anyone know any other solution to this problem?

@Peterrrrr said:
Discoverd today that my videocamera map in Quickpic was lost, must be deleted in some way
My OPO is not rooted.
So when Im connecting my OPO to my PC it finds the telephone but not as e:,f:... It find the device name, so Recuva or ohter recoveryprograms wont recognize it.
So I downloaded this https://www.recovery-android.com/oneplus-phone-photo-recovery.html
The problem is when Im going to use this program is that the phone restart itself all the time.
I have read that it is much easier to recover files while OPO is root, but I find to problems:
1. If I root the phone all data will be erased.
2. If I root some programs might overwrite lost data...
Anyone know any other solution to this problem?
Click to expand...
Click to collapse
What android version are you on??
If it is 6.0.1 then after connecting device to PC you need to go in notification drawer and click on USB options and click on MTP.

kunal1540 said:
What android version are you on??
If it is 6.0.1 then after connecting device to PC you need to go in notification drawer and click on USB options and click on MTP.
Click to expand...
Click to collapse
Yes, I have to do that the whole time after It has restarted. Is there anyway to choose in the settings to make it do it on auto?

@Peterrrrr said:
Yes, I have to do that the whole time after It has restarted. Is there anyway to choose in the settings to make it do it on auto?
Click to expand...
Click to collapse
Is it possible to root OPO without unlocking bootloader?

@peterrrrr said:
is it possible to root opo without unlocking bootloader?
Click to expand...
Click to collapse
no.
If you try , you may brick your phone

drmuruga said:
no.
If you try , you may brick your phone
Click to expand...
Click to collapse
Dont know how to svolve this, because if I unlock the boatloader I must wipe everything. Is it still possible to recovery deleted pictures and videos after an wipe is done with recuva? Isnt a wipe actually the same thing when you format?
I also find this, someone know if this is a safe way to root?
https://forums.oneplus.net/threads/...install-twrp-without-losing-your-data.396385/

@Peterrrrr said:
Dont know how to svolve this, because if I unlock the boatloader I must wipe everything. Is it still possible to recovery deleted pictures and videos after an wipe is done with recuva? Isnt a wipe actually the same thing when you format?
I also find this, someone know if this is a safe way to root?
https://forums.oneplus.net/threads/...install-twrp-without-losing-your-data.396385/
Click to expand...
Click to collapse
In one plus one, no bootloader unlock zip like tool needed as per above forum thread , because fastboot oem unlock command only unlock OPO. Above thread for bricked phones.
You can store photos, videos and other files in pc, then unlock then transfer all data again to your mobile, for apps use es file explorer and backup your apps as apk filesand transfer them to pc, then restore
Only 3 steps
1.unlock bootloader
2.flash or boot twrp recovery
Flash permanant recovery change
Boot one time recovery change, after boot into system recovery changed again to stock
3. Root with supersu or not.

An OPO-owner's pc recognize his OPO as a cd-unit and he can access it to copy and delete files on it
So my question is, are here other owners that have the same thing on their pc when they connect their opo and is it possibile somewhere in the settings to make my pc to recognize it like that?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Please, please could anyone help me. I have so many videos on my children in the lost map so I really need to get help.
@Peterrrrr said:
An OPO-owner's pc recognize his OPO as a cd-unit and he can access it to copy and delete files on it
So my question is, are here other owners that have the same thing on their pc when they connect their opo and is it possibile somewhere in the settings to make my pc to recognize it like that?
Click to expand...
Click to collapse

[update] Finalllly !!!!! Root Nougat S6 Verizon

Finally I Get Root On S6 Verizon with nougat :laugh: :laugh:
Edit For those didn't work with them use this
https://forum.xda-developers.com/ve...al/rom-offical-nougat-pre-rooted-rom-t3718155
There Is a Proof In Attachments
My Rom DQD1
*Do It AT YOUR OWN RISK!* I am not responsible for ANY damage to your device
Edit :
A Video Proof And How To Do
In Description Of Video I add link to my rom
To Root You Will Need The Following Files :
G920V_ENG_ROOT_B4_ 7.0 , Root Files and Odin In The Attachments
First Extract G920V_ENG_ROOT_B4_ 7.zip
Flash G920V_ENG_ROOT_B4_ 7.0.tar with odin in AP
After Reboot make Sure You enabled usb debugging go to Settings and tap on About Phone. Tab Software Info Find the Build Number and tap on it 7 times to enable Developer Options.
Now enter Developer Options and find USB Debugging. Enable it
Plug Your Device To Pc
Now Extract S6Root_Unroot_SU_2_79.zip
Plug your phone into the computer
Enter The Folder S6Root_Unroot_SU_2_79 And Double Click On root.bat
If this is your first time running ADB, you will see a prompt on your phone asking you to authorize a connection with the computer. Grant it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
wait for minute your phone will reboot automatically
Your Phone Will reboot 2 time on 3 will boot
Every Time You will reboot your device it will reboot 2 time on 3 will boot because we have loocked bootloader
Dont Forget To hit Thanks Button
sorry For My Bad English

where is the proofs?
Dude.... and, where is the proofs? Wich nougat version did you use? Some screenshot? I dont know but a root for this phone sounds really amazing and surprising.

NerdTronik said:
Dude.... and, where is the proofs? Wich nougat version did you use? Some screenshot? I dont know but a root for this phone sounds really amazing and surprising.
Click to expand...
Click to collapse
You Are Right I will Post ScreenShot

NerdTronik said:
Dude.... and, where is the proofs? Wich nougat version did you use? Some screenshot? I dont know but a root for this phone sounds really amazing and surprising.
Click to expand...
Click to collapse
I Added Proof In Attachments Check them

Ok, I have a problem with the adb, I tried many times but it still freezing and my cellphone screen too, I searched in the internet many ways to mount the system partition as read and write but all failed. Im thinking that the problem is the nougat version, I have the J1 and Im downloading the D1. Pst, the drivers and the cables are ok, I used another adb codes and they worked.

Seems like it only works on Qd1, so if have updated QI1 or QJ1, got to flash back to Qd1 to get it to work
...

I flashed DQD1 via Odin and after that, I flashed the .tar, but it still freezing my screen, I tried first without flashing the .tar because after flashing the firmware, the custom logo appeared. But again, the adb process failed, itsn freezed like the other but was unable to copy the su.img
---------- Post added at 07:06 PM ---------- Previous post was at 06:13 PM ----------
I did the same process that you made, so, I don't know why this happen, can you please assist this?? The phone doesn't matter, I just want to prove if this really work. I'll be amazed if this really do.

I´m facing the same problem on my device as @NerdTronik , just frezes when try to remount system as rewritable.. No succes as yet and I'm on Qd1 with the same kernel version.. Dont know How you Got to succesfully Remounted the system..

Another one stuck scratching my head with the phone locking when the batch script gets to the first adb shell mount command. The flash to DQD1 (from here, all 4 files) went fine. Flashed the new boot image without issue, reboot reflects custom image. Enabled debugging, connected with ADB, but that mount would be the final thing that would occur. Hoping this is just something we need clarified in the instructions.

Ok for all of your problem tonight i will make a youtube video learn how to root with the proof of it ☺?

Thanks for the root! Tell me, after I get the root of what custom firmware I can put? I understand you only need the development of verizon?

I did a Google for the the boot image file name and came across this link:
http://www.techzai.com/eng-root-file-samsung-android-7-nougat/
NOTE: I accessed this via Google's cache, and with NoScript plugin in Firefox. The firewall I was accessing through blocked the site for a reason... unsure if that could be that it isn't safe, work just didn't want me going there during business, etc. Go at your own risk.
But one thing that was noted in those instructions was to not only enable USB Debugging, but to also enable OEM Unlock in the developer options.
The thread for the S7 (which I think would apply but we just need to use the later released S6 boot image) mentions disabling secure startup. https://forum.xda-developers.com/ve...-to-notes-root-install-xposed-unroot-t3411039
Might have time to play around with this more during the coming weekend, but maybe @faw_wal or another member will get additional info before then.

Don't work in my phone

So has any one else been able to confirm this as a working method?

DonaldAnderson said:
So has any one else been able to confirm this as a working method?
Click to expand...
Click to collapse
@DonaldAnderson
I was made a video about method but from begin when i flash the reactivation lock was on and now it's locked if you want a video with a proof i can post it for you and tomorrow i will post the full video do you want a proof video now ?

faw_wal said:
Finally I Get Root On S6 Verizon with nougat :laugh: :laugh:
There Is a Proof In Attachments
My Rom DQD1
*Do It AT YOUR OWN RISK!* I am not responsible for ANY damage to your device
To Root You Will Need The Following Files :
G920V_ENG_ROOT_B4_ 7.0 , Root Files and Odin In The Attachments
First Extract G920V_ENG_ROOT_B4_ 7.zip
Flash G920V_ENG_ROOT_B4_ 7.0.tar with odin in AP
After Reboot make Sure You enabled usb debugging go to Settings and tap on About Phone. Tab Software Info Find the Build Number and tap on it 7 times to enable Developer Options.
Now enter Developer Options and find USB Debugging. Enable it
Plug Your Device To Pc
Now Extract S6Root_Unroot_SU_2_79.zip
Plug your phone into the computer
Enter The Folder S6Root_Unroot_SU_2_79 And Double Click On root.bat
If this is your first time running ADB, you will see a prompt on your phone asking you to authorize a connection with the computer. Grant it.
wait for minute your phone will reboot automatically
Your Phone Will reboot 2 time on 3 will boot
Every Time You will reboot your device it will reboot 2 time on 3 will boot because we have loocked bootloader
Dont Forget To hit Thanks Button
sorry For My Bad English
Click to expand...
Click to collapse
Don't you think your omitting a step??, we all follow each step you pointed in the instructions and got the same problem, devices just freezes when execute the root.bat

faw_wal said:
@DonaldAnderson
I was made a video about method but from begin when i flash the reactivation lock was on and now it's locked if you want a video with a proof i can post it for you and tomorrow i will post the full video do you want a proof video now ?
Click to expand...
Click to collapse
I think that it will be nice, I'll be waiting for it in a few hours. We just want to solve the errors, exactly the mounting system partition process.

can you tell me how to do that? when i double click root.bat my homegreen freezy?
can you tell me how to do that? when i double click root.bat my homegreen freezy
motorec said:
Thanks for the root! Tell me, after I get the root of what custom firmware I can put? I understand you only need the development of verizon?
Click to expand...
Click to collapse

I was doing a research and found this thread with the same problem as us ,seems like its knox that blocking the system remount.https://forum.xda-developers.com/att-galaxy-s6/general/root-att-samsung-g920a-s6-g925a-s7edge-t3564637

DDwhite said:
I was doing a research and found this thread with the same problem as us ,seems like its knox that blocking the system remount.https://forum.xda-developers.com/at...ot-att-samsung-g920a-s6-g925a-s7edge-t3564637
Click to expand...
Click to collapse
Oh nice, it's just seems impossible until somebody find the method to write in the system partition, in the thread you posted here, there was a man saying that we need to flash or do something before run root.bat, he didn't checked before but, sounds like a development.
http://rootjunkysdl.com/files/?dir=Gates/DeBloater

[TOOL][BERYLLIUM] TOOL ALL IN ONE (Drivers|TWRP|Factory Image|Stock Recovery)

This is the Xiaomi PocoPhone F1's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
​

I want to specify that this tool can't bypass Xiaomi Bootloader Unlock procedure but all others function are working

Whoa... It's here already... Gonna make life easier for a lot of people like me ^_^
Thanks for the efforts ? Much Love.

Nice thing

mauronofrio said:
this is the xiaomi pocophone f1's tool all in one discussion thread more info and download go to the original thread
tool all in one
advanced options
functions
install drivers
unlock bootloader
lock bootloader (use carefully)
flash twrp recovery
flash stock recovery
flash stock factory image
install apks
uninstall apks
take a screenshot
flash partitions
erase all data (this function can decrypt the phone)
reboot phone
update the tool to latest version
update adb and fastboot to latest version
set adb and fastboot priviliges in system wide
install zip directly from pc (required twrp on phone)(these functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect twrp on my phone)
flash fastboot rom
delete downloaded files
adb file manager
device list
if you want you can send a request to add a new device here:
new device request form
device list
download
original thread
donate link
if you want to support the project please consider making a donation, thanks.
​
Click to expand...
Click to collapse
thank you very much it was much awaited tool .

bravo2526 said:
thank you very much it was much awaited tool .
Click to expand...
Click to collapse
Please don't quote the OP.
Sent from my POCO F1 using XDA Labs

Good tool. Please do make provision to select multiple apps at a time under 'install apk' option. Otherwise it is difficult to select a single app, then waiting it to install and then selecting the next app then waiting and so on...

mauronofrio said:
I want to specify that this tool can't bypass Xiaomi Bootloader Unlock procedure but all others function are working
Click to expand...
Click to collapse
EDL too?

itsmuhammedmuneer said:
Good tool. Please do make provision to select multiple apps at a time under 'install apk' option. Otherwise it is difficult to select a single app, then waiting it to install and then selecting the next app then waiting and so on...
Click to expand...
Click to collapse
Good idea, i will do it

mauronofrio said:
Good idea, i will do it
Click to expand...
Click to collapse
Happy to hear that

Boot to edl working?

Puneeth 676797 said:
Boot to edl working?
Click to expand...
Click to collapse
I have not tested it

How to root using this tool? I select root after flashing the recovery but it just flashes the recovery and boots into it. What's the next step?

jperkovic said:
How to root using this tool? I select root after flashing the recovery but it just flashes the recovery and boots into it. What's the next step?
Click to expand...
Click to collapse
Have you choose the magisk version? Can you see when you are in TWRP the device is recognized in adb mode?

itsmuhammedmuneer said:
Happy to hear that
Click to expand...
Click to collapse
Updated the tool with a new Apk Installer that support multiple apk install at the same time

mauronofrio said:
Updated the tool with a new Apk Installer that support multiple apk install at the same time
Click to expand...
Click to collapse
Wow...!!! Thanks for hearing. I wil test and report.:good:

mauronofrio said:
Updated the tool with a new Apk Installer that support multiple apk install at the same time
Click to expand...
Click to collapse
I was busy for a while and I tested it.
Cannot install apks as bulk (30+ apks) by selecting all. I tried to install 68 apks at time, failed, again tried half of it, failed.
No issues with 20-25 apks.
Please do have a note of it and try to fix it.

itsmuhammedmuneer said:
I was busy for a while and I tested it.
Cannot install apks as bulk (30+ apks) by selecting all. I tried for install 68 apks at time, failed, tried half of it, failed.
No issues with 20-25 apks.
Please do have a note of it and try to fix it.
Click to expand...
Click to collapse
Oh god, i tried with 10-15 apks, i will try with more of them, can you tell me which problem gived you?

mauronofrio said:
Oh god, i tried with 10-15 apks, i will try with more of them, can you tell me which problem gived you?
Click to expand...
Click to collapse
No response after selecting the apks. Usually a command window should open, but not in this case. Installing is shown only for a fraction of second and then it disappears and back to "Install selected Apks".

mauronofrio said:
Oh god, i tried with 10-15 apks, i will try with more of them, can you tell me which problem gived you?
Click to expand...
Click to collapse
No issues with 25+ apks. Try with 50+apks.

How To Guide Two ways to backup TB-J706F without unlocking bootloader.

For many users, unlocking the bootloader is unacceptable, because the tablet will stop updating via OTA. However, there are ways to save important partitions without unlocking them, which can be useful in case of damage during flashing or update.
1. The first method is described here. It works, I tested it. The Read button reads the partition to a file, the Load button writes from the image file to the partition.
Disadvantages: you can't copy the whole FS of the tablet at once, you have to copy the partitions one by one.
2. The second way goes here. It works on Linux, Windows, and MacOS. I checked it on the Live CD Mint 20.2. The tablet was recognized, the partition table was read and I successfully copied one boot partition.
Disadvantages: Difficult for Windows users.
Cons: You can copy selected partitions in any combination or the whole tablet at once.
---
It is very likely that these 2 methods will work for other models of tablets as well...

Were you able to use the --skip parameter with edl?
I used --skip=super,userdata the other day but it still backed up those partition (long wait for userdata )

MrCrayon said:
Were you able to use the --skip parameter with edl?
I used --skip=super,userdata the other day but it still backed up those partition (long wait for userdata )
Click to expand...
Click to collapse
Sorry, not tried this option. Will to try later.

MrCrayon said:
Were you able to use the --skip parameter with edl?
I used --skip=super,userdata the other day but it still backed up those partition (long wait for userdata )
Click to expand...
Click to collapse
Yes, you are right. This command not works, it made backup of all partitions. I made issue for author.

f1tm0t said:
Yes, you are right. This command not works, it made backup of all partitions. I made issue for author.
Click to expand...
Click to collapse
My PR has been merged, skipping should work now.

MrCrayon said:
My PR has been merged, skipping should work now.
Click to expand...
Click to collapse
Yes, my issue is same. Can't try this just now, so sad.

Tested fixed version some days ago - now --skip option works fine. Dump of all partitions in one folder (except biggest userdata:
Spoiler: Scr
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I have a question, what about userdata when it is encrypted?
How to get/set the key from the TEE?
Or are the chinese ROMs are unencrypted?
Best regards

CryptMan said:
I have a question, what about userdata when it is encrypted?
Click to expand...
Click to collapse
My userdata permanently unencrypted with no-verity-opt-encrypt. TWRP says "Decrypted with default password"

f1tm0t said:
For many users, unlocking the bootloader is unacceptable, because the tablet will stop updating via OTA. However, there are ways to save important partitions without unlocking them, which can be useful in case of damage during flashing or update.
1. The first method is described here. It works, I tested it. The Read button reads the partition to a file, the Load button writes from the image file to the partition.
Disadvantages: you can't copy the whole FS of the tablet at once, you have to copy the partitions one by one.
2. The second way goes here. It works on Linux, Windows, and MacOS. I checked it on the Live CD Mint 20.2. The tablet was recognized, the partition table was read and I successfully copied one boot partition.
Disadvantages: Difficult for Windows users.
Cons: You can copy selected partitions in any combination or the whole tablet at once.
---
It is very likely that these 2 methods will work for other models of tablets as well...
Click to expand...
Click to collapse
Hi mate,
I've used the method #1 that you linked, to take a full backup of my pad pro (thanks for sharing this, helped a lot since I really wanted to have a backup to restore to out-of-box if needed in the future).
I ended up with 91 partitions saved, but it seems a lot of these partitions would never really get touched or changed, no matter what you do to your tablet (in terms of rooting, custom roms etc), so I wanted to ask you if you could give a break down of what you think are the essential ones that would need to be restored to revert back to "out of the box". For example. I suspect a lot of the partitions house data such as serials, mac addresses, component firmware etc, etc, and such-like which would not need to be written back to the device during a restore.
I'm attaching a pdf I made showing all the partitions available through use of QFIL, if you could reference it in any advice/help with your answer I would be grateful. Thanks

The firmware writes to different sections, in particular to frp and frpinfo and others. If you want to get the tablet back to the same state as you backed it up, you must have a copy of all partitions.
For a regular backup you don't need a copy of all partitions, just the ones you need.
Besides, I recommend to have backups of those partitions that are not in the firmware in case the internal memory fails or human errors (like ticking "Erase all before download" in QFil settings)

f1tm0t said:
The firmware writes to different sections, in particular to frp and frpinfo and others. If you want to get the tablet back to the same state as you backed it up, you must have a copy of all partitions.
For a regular backup you don't need a copy of all partitions, just the ones you need.
Besides, I recommend to have backups of those partitions that are not in the firmware in case the internal memory fails or human errors (like ticking "Erase all before download" in QFil settings)
Click to expand...
Click to collapse
thanks, great explanation, i appreciate it

f1tm0t said:
1. The first method is described here. It works, I tested it. The Read button reads the partition to a file, the Load button writes from the image file to the partition.
Disadvantages: you can't copy the whole FS of the tablet at once, you have to copy the partitions one by one.
Click to expand...
Click to collapse
Hi @f1tm0t ,
i'm going to use method 1), can you please share me how to get the firehose that was mentioned in that article?
Thank you!

khanhj said:
how to get the firehose
Click to expand...
Click to collapse
You need to download rom (firmware) for your device, unzip it in separate folder and point to folder from QPST.

@f1tm0t thank you for your reply.
The reseller send it (TB-J716F) to me with custom global rom and unlock bootloader, so i follow the guide to flash stock Chinese rom and lock bootloader, it worked but widevine L3. Then i put the update.zip to push it through version 14.0.127 with locked bootloader but still widevine L3.
I'm going to backup 5 important partitions: fpinfo, persist, uefivarstore, secdata, frp, then redo all processes again.
BTW do you have any idea what is this: https://github.com/zenlty/Qualcomm-Firehose

in the extracted ROM (ZUI 12) there is 2 firehose which one should i use?

khanhj said:
which one should i use?
Click to expand...
Click to collapse
You must to use prog_firehose_ddr.elf
khanhj said:
BTW do you have any idea what is this: https://github.com/zenlty/Qualcomm-Firehose
Click to expand...
Click to collapse
Sometimes I use this with Linux: https://github.com/bkerler/edl

f1tm0t said:
You must to use prog_firehose_ddr.elf
Sometimes I use this with Linux: https://github.com/bkerler/edl
Click to expand...
Click to collapse
i tried to flash ROM ZUI 12 now i got this
Can you advise what should i do?

As my expirience say - you need unlock bootloader.

f1tm0t said:
As my expirience say - you need unlock bootloader.
Click to expand...
Click to collapse
yes but i dont know how to unlock bootloader at this state.
Thank you for your replies!
--
Edit: oh well, i flash the ROM ZUI 12 again, stick on option Reset State machine and Delete before download, my device able to boot up again to ZUI with unlocked bootloader.
I hope anyone had the same issue can fix it.

Question How can I root the Motorola Edge 30?

All i can find are tutorials for the Neo and Pro versions of this device. Can this version be rooted? How?

recovery sideload+magisk

alekksander said:
recovery sideload+magisk
Click to expand...
Click to collapse
Hey, thanks for the reply. I'm still new, can you elaborate? Maybe possibly link a tut? Appreciate it regardless.

alekksander said:
recovery sideload+magisk
Click to expand...
Click to collapse
What is recovery sideload?

useroso987 said:
What is recovery sideload?
Click to expand...
Click to collapse
Well, don't get me wrong, but if that's all unknown to you ... you'd better don't root your device ;-).
The risk to brick your device or open unforseen security wholes is quite too large, you'd better read some tutorials about flashing roms and customizations before trying to get into the world of Magisk.
Cheers
Kurt

Kurt Krummbein said:
Well, don't get me wrong, but if that's all unknown to you ... you'd better don't root your device ;-).
The risk to brick your device or open unforseen security wholes is quite too large, you'd better read some tutorials about flashing roms and customizations before trying to get into the world of Magisk.
Cheers
Kurt
Click to expand...
Click to collapse
Well, i've been reading past days...
I've installed Delta Magisk through adb on Lineage OS 20. It was quite a fast and interesting process!
Thank you.

Kurt Krummbein said:
Well, don't get me wrong, but if that's all unknown to you ... you'd better don't root your device ;-).
The risk to brick your device or open unforseen security wholes is quite too large, you'd better read some tutorials about flashing roms and customizations before trying to get into the world of Magisk.
Cheers
Kurt
Click to expand...
Click to collapse
Instead of being helpful you give some strange lessons it seems to me that you are useless here. If someone asks you politely for help, explain it to them. Every phone unlocks differently.

Kasjopea73 said:
Instead of being helpful you give some strange lessons it seems to me that you are useless here. If someone asks you politely for help, explain it to them.
Click to expand...
Click to collapse
Well, i tried to figure out, that not knowing the basics of running the phones recovery and using sideload is a bad starting point to open root access on the device.
Kasjopea73 said:
Every phone unlocks differently.
Click to expand...
Click to collapse
Well, that's not the core of my answer and i do not disagree ... just wanted to prevent a newbee from bricking his device and not beeing able to recover ;-) or walking around with a spy-phone recording and sharing his whole live-data with someone who should not know anything of it at all.
@Kasjopea73 : if you volonteer to answer request like "i tryied to root and bricked my device" in personal chat, then it's ok ... i've seen too many chats on other devices beeing flooded by those kind of requests, rendering these chats useless for developers who tried to exchange information on fixing problems.
Ciao
Kurt

Kurt Krummbein said:
Well, i tried to figure out, that not knowing the basics of running the phones recovery and using sideload is a bad starting point to open root access on the device.
Well, that's not the core of my answer and i do not disagree ... just wanted to prevent a newbee from bricking his device and not beeing able to recover ;-) or walking around with a spy-phone recording and sharing his whole live-data with someone who should not know anything of it at all.
@Kasjopea73 : if you volonteer to answer request like "i tryied to root and bricked my device" in personal chat, then it's ok ... i've seen too many chats on other devices beeing flooded by those kind of requests, rendering these chats useless for developers who tried to exchange information on fixing problems.
Ciao
Kurt
Click to expand...
Click to collapse
The best thing to do is not to write anything anymore, you are no help here and it is better to disappear. This is a forum for development, not for throwing obstacles under someone's feet. Rooting this phone is trivial, just extract the boot.img from the rom you are using, not from any other, and in magisk make a patch, instructions you will find below the post. If you don't know what is going on don't write nonsense to anyone.

Instructions Steps: Unlock Bootloader and Root​Platform Tools:
For Windows:​
Download File: Download
For macOS​
Download File: Download
For Linux​
Download File: Download
At first, you need to connect your device to PC via USB cable.
Next, head over to the platform-tools folder, then you have to type in CMD in the address bar and click enter. Command Prompt window will popup.
Now type the below command to boot your device into fast boot mode:
adb reboot bootloader
Next, you will need to get your device-specific unlock token. For that, execute the below command:
fastboot oem get_unlock_data
You will now get an alphanumeric character, that you have to copy all of the codes without the bootloader prefix. To follow this step, you may copy all the commands, paste it in a Notepad, and then delete the bootloader prefix. Further, make sure that there isn’t any space between any line of codes.
Now go to Motorola Unlock page and sign-in with your account. After this, copy that code and paste that into provided space. Then tap on the “Can my device be unlocked button”
Then, you will receive a Unique Key on your email. In normal scenerio, the code usually takes a few minutes to reach your email. But if not wait for few more minutes and you will get the code.
Go back the command prompt window and execute the below command. In the following command replace the UNIQUE_KEY with the key that you have received from Motorola.
fastboot oem unlock UNIQUE_KEY
Your bootloader is unlocked, after the whole process is done which will take few minutes. Now if your device doesn’t reboot to the system then you can use the below command to do it manually.
fastboot reboot
CONGRATULATIONS! YOU HAVE UNLOCKED THE BOOTLOADER OF YOUR DEVICE. NOW LET’S PROCEED TO ROOT THE DEVICE
2. ROOT MOTOROLA EDGE 30, PLUS ecc......​Thera are two ways root motorola edge plus: one is flashing SuperSu Zip with TWRP Recover and another one patching the boot.img file. Currerntly, there is no TWRP Recovery for motorola edge plus, so we will be choosing the latter (patching) option.
Instructions Steps:​
First download the stock firmware and extract the firmware file. Now search the stock boot file which would be named as boot.img. Copy this file to your Motorola edge plus.
Install Magisk Manager which you have downloaded earlier.
After installation, open magisk manager and tap on Install > Install > Select and Patch file (Here you have to select the boot.img file)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Magisk will start the patching process which will take just a few seconds.
After the patching process is done, you should see the magisk_patched.img in your internal storage’s Downloads folder.
Now you have to transfer magisk_patched.img to your platform-tools folder. Open CMD in this folder by searching “CMD” in the address bar and hit Enter.
Connect Motorola edge plus with PC via USB Cable and type the following command:
adb reboot bootloader
Now you have to flash magisk_patched.img and for that type the following command:
fastboot flash boot magisk_patched.img
The process will take only a few seconds. Once its complete, you may reboot your device via the following command:
fastboot reboot
Now you can open magisk manger and very the root as well.
CONGRATULATIONS! YOU HAVE SUCCESSFULLY ROOTED YOUR MOTOROLA EDGE PLUS.

There is another solution for making Root on Telegram groups. Unlock the bootloader and install TWRP then Magisk.

I did this as described, it works fine. I tried a couple of days with root and stock ROM but revert back to the original because of google wallet that didn't work suddenly.

hans3103 said:
I did this as described, it works fine. I tried a couple of days with root and stock ROM but revert back to the original because of google wallet that didn't work suddenly.
Click to expand...
Click to collapse
SafetyNet fix install