Related
Hello!
I have a Verizon HTC ONE M8 that no matter what it won't download the new update. I've bought 3 of them (identical) 1 month ago from Ebay. One of them was able to receive the update. On the other two i keep receiving the following message: "We were not able to download this update. To retry, go to Settings > Software update. "
My device is S-off (after a lot of effort). I've tried to get rid of all the bloatware and many more by flashing a new ROM. I have tried flashing ViperROM, ARHD, Clean ROM using TWRP Recovery, without any success. All of my attempts got stuck at the booting screen for more than 30 minutes without any success of booting into the OS. Clean ROM even refused to flash properly. Keep in mind that all the ROMs that I've flashed were based on 4.4.2 firmware, the one that my phone came with, not 4.4.3. I've searched on this forum for a flashable 4.4.3 OTA update, but no success either. What's to be done !?!? All my attempts of installing a new OS failed. Please HELP!
P.S: I'm a newbie when it comes to all of this stuff. First time doing S-off/ installing custom ROMs.
hgpt said:
Hello!
I have a Verizon HTC ONE M8 that no matter what it won't download the new update. I've bought 3 of them (identical) 1 month ago from Ebay. One of them was able to receive the update. On the other two i keep receiving the following message: "We were not able to download this update. To retry, go to Settings > Software update. "
My device is S-off (after a lot of effort). I've tried to get rid of all the bloatware and many more by flashing a new ROM. I have tried flashing ViperROM, ARHD, Clean ROM using TWRP Recovery, without any success. All of my attempts got stuck at the booting screen for more than 30 minutes without any success of booting into the OS. Clean ROM even refused to flash properly. Keep in mind that all the ROMs that I've flashed were based on 4.4.2 firmware, the one that my phone came with, not 4.4.3. I've searched on this forum for a flashable 4.4.3 OTA update, but no success either. What's to be done !?!? All my attempts of installing a new OS failed. Please HELP!
P.S: I'm a newbie when it comes to all of this stuff. First time doing S-off/ installing custom ROMs.
Click to expand...
Click to collapse
You probably won't be able to take the OTA with a custom recovery, it has to be stock. Best bet is to flash the 4.4.3 firmware from the development section since you're s-off, then flash an already rooted stock 4.4.3 rom. It's been a while since I've done this stuff so if I mentioned some incorrect info, my apologies.
dynofrk666 said:
You probably won't be able to take the OTA with a custom recovery, it has to be stock. Best bet is to flash the 4.4.3 firmware from the development section since you're s-off, then flash an already rooted stock 4.4.3 rom. It's been a while since I've done this stuff so if I mentioned some incorrect info, my apologies.
Click to expand...
Click to collapse
I flashed back again the stock ROM and i keep receiving the same message over and over again. No TWRP recovery this time, just the red triangle. I guess my best bet is to try and flash the CleanROM ODEX 4.4.3 as mentinoned here: @branmuffin17
I'll come back with the results.
hgpt said:
I flashed back again the stock ROM and i keep receiving the same message over and over again. No TWRP recovery this time, just the red triangle. I guess my best bet is to try and flash the CleanROM ODEX 4.4.3 as mentinoned here: @branmuffin17
I'll come back with the results.
Click to expand...
Click to collapse
If you are on the old firmware you need to update firmware separately.
And btw, if you freeze just one system app that can cause a Vzw ota to fail.
Question.....Is the phone active on your account? I also had one in the drawer and got the same error till I switched it to the active device on my account.
It honestly sounds like there is something preventing the ota to even download, if that's the case use dottat's ruu to return to a clean slate, if it still won't download the OTA then I would be willing to bet money that they are defective or not genuine Verizon M8s And if I were to guess it's more of the latter that would be the only valid reason every Rom you've tried fails no matter what.
sent from space
runandhide05 said:
It honestly sounds like there is something preventing the ota to even download, if that's the case use dottat's ruu to return to a clean slate, if it still won't download the OTA then I would be willing to bet money that they are defective or not genuine Verizon M8s And if I were to guess it's more of the latter that would be the only valid reason every Rom you've tried fails no matter what.
sent from space
Click to expand...
Click to collapse
Based on what you said i went on some websites to check the IMEI/ESN of the device it seems to be OK. After that i went to the Verizon Wireless website to try an activate my phone and when it comes to "Enter your Device ID to check eligibility", I type in the IMEI and the following message apears: "The phone associated with the Device ID you entered is not compatible with the Verizon Wireless network." To me is strange because on the back of the phone it says Verizon 4G LTE. When it comes to the identity of the phone it is a HTC6525LVW. The phone is GSM Unlocked (I use my phone in Europe so i needed it to be GSM unlocked). More strange it is to me that i don't receive the same message when i type in the IMEI of the others Verizon GSM unlocked HTC's ONE M8 that i bought along with this one.
I guess my only chance is to flash the new firmware @here[and after that flash the Deoxed 4.4.3 Stock Clean ROM @here. If it's not going to work i really don't know what's else it's to be done.
hgpt said:
Based on what you said i went on some websites to check the IMEI/ESN of the device it seems to be OK. After that i went to the Verizon Wireless website to try an activate my phone and when it comes to "Enter your Device ID to check eligibility", I type in the IMEI and the following message apears: "The phone associated with the Device ID you entered is not compatible with the Verizon Wireless network." To me is strange because on the back of the phone it says Verizon 4G LTE. When it comes to the identity of the phone it is a HTC6525LVW. The phone is GSM Unlocked (I use my phone in Europe so i needed it to be GSM unlocked). More strange it is to me that i don't receive the same message when i type in the IMEI of the others Verizon GSM unlocked HTC's ONE M8 that i bought along with this one.
I guess my only chance is to flash the new firmware @here[and after that flash the Deoxed 4.4.3 Stock Clean ROM @here. If it's not going to work i really don't know what's else it's to be done.
Click to expand...
Click to collapse
The message from the vzw site tells me something is not right.
Google goophone or knock off gs4, the goophone also has an m8 now too... Even with all the branding and everything. And I've seen some gs4s that run what appears to be TouchWiz cloned to a T.
I'd try calling vzw and talk to a rep and it's possible that they could give you more info other than just what the site said.
sent from space
So I did what I've said:
1. Installed firmware provided here @Tigerstown
2. Installed the Odex Stock Rooted ROM proivede here: @scrosler
I am pleased to announce you that everything is fully functional now
Phone is showing:
Android Version: 4.4.3
Software number: CleanROM 2.0.0 (after flashing it from @here)
Baseband version: 1.09.20.0702
Bulid number: 2.21.605.2 CL362279 release-keys
After managing to flash the 4.4.3 version of Android all went up without any problem. Tried to ARHD but it's still not booting. After that installed ViperROM which went up all, but to me it is not the pure HTC Sense 6 experience i was looking about and all that customization is to much for me, so i flashed CleanROM 2.0.0 and here I am. Everything is as it should be: no bloatware, pure HTC Sense 6, optimized performance... and above all the mobile hotspot is now fully functional, not to mention the EXT SAVER.
As a conclusion, to all that guys that are not able to update to the 4.4.3 version via the OTA updates provided by Verizon do what I did above (steps 1 and 2).
ATTENTION: Your device needs to be S-Off and bootloader unlocked + custom recovery!!!
Another thing worth to be mentioned: it would be great if the admins could flag this thread, cause I've seen so many users on different forums that are not able to update via the OTAs.
In the end i would like to thank to all the devs out there for their work and to the users for their support. Cheers!:highfive:
Hi there
I am still on build NXT - L29C636B193 with June secuirity patch.
I have the dual SIM L29 4gb gold variant. I am in the UK.
Still waiting for Nougat. From reading around it seems that almost everyone has already recieved the official OTA...
I have also seen people manually flashing the OTA but I am worried I may lose my warranty and make certain apps like Android Pay unavailable.
All advice is appreciated
Thanks:laugh:
If you want to have warranty, stay at stock.
There is a major difference between nougat and mm (in look and performance for me). I dont need my warranty because - 1) ive bought it in china , 2) what does warranty cover? if i crash screen - warranty is worthless, if i crash software - i can fix it by myself - so its useless...
I ve swaped soft for european L29C432B320 from DL-00 and i dont care about OTA or some****.
Just flashed, rooted and using as always. For me root is necessary, so warratny is useless anyway.
The only thing is that if something bricks your phone like e.g. melting in pocket (vide SGS Note7 ) there is nothing you can do...
So - for me - just manually flashed nougat and root it and its ok.
Apad121 said:
Hi there
I am still on build NXT - L29C636B193 with June secuirity patch.
I have the dual SIM L29 4gb gold variant. I am in the UK.
Still waiting for Nougat. From reading around it seems that almost everyone has already recieved the official OTA...
I have also seen people manually flashing the OTA but I am worried I may lose my warranty and make certain apps like Android Pay unavailable.
All advice is appreciated
Thanks:laugh:
Click to expand...
Click to collapse
There is a Upate ,but only rollout in Asia,not for Asia Phones in Europe.
Here is the Update,its a German Site
http://www.android-hilfe.de/thema/huawei-mate-8-nougat-nxt-l29c636b521-full-asien.810037/
I was with NXT-L29C432B192 and on 17.01.2017 receive OTA (B560) update via HiCare.
i have a C636 and converted to C432 and i am on B560 works fine
letschky said:
There is a Upate ,but only rollout in Asia,not for Asia Phones in Europe.
Here is the Update,its a German Site
http://www.android-hilfe.de/thema/huawei-mate-8-nougat-nxt-l29c636b521-full-asien.810037/
Click to expand...
Click to collapse
So can I do this without losing warranty or rooting?
Because I want things like Android Pay to still be intact.
Thanks
ronnie72 said:
I was with NXT-L29C432B192 and on 17.01.2017 receive OTA (B560) update via HiCare.
Click to expand...
Click to collapse
Are you in Europe as well?
Because I want to know if my imported Huawei Mate 8 will receive an official OTA from Huawei...
Thanks
I receive the Ota only to the converted C432.
On original C636 no Ota Updates
Can I load the latest update onto the device so that the system update menu will recognise the update?
Maybe use dload or somrthing?
Can someone point me in the right direction?
Thanks
Apad121 said:
Are you in Europe as well?
Because I want to know if my imported Huawei Mate 8 will receive an official OTA from Huawei...
Thanks
Click to expand...
Click to collapse
Yes, Europe. In HiCare i checked Europe/Germany and recive OTA update.
ronnie72 said:
Yes, Europe. In HiCare i checked Europe/Germany and recive OTA update.
Click to expand...
Click to collapse
Hi there
When I contacted the European chat helper in the Hi care app, they said that my model the NXT - L29 will not get OTA updates while i am not in Southeast Asia?
I don't know if this true as it sounds bizarre, most devices are still updated when not in their home land.
What model number is yours?
Thanks
checksum error
Hi there,
the update appears and it starts to download, but most of the time, I get a checksum error. Only 2 times (out of perhaps 8 downloads) it downloaded properly, so far. The device restarted and got stuck at the "Your device got unlocked and can't be trusted." and "The device is now booting" prompt. I let it rest for more than 3 hours, but nothing happened.
So: none of the categories in the poll apply to me: I seem to get the update, but cannot install it.
mwanner said:
Hi there,
the update appears and it starts to download, but most of the time, I get a checksum error. Only 2 times (out of perhaps 8 downloads) it downloaded properly, so far. The device restarted and got stuck at the "Your device got unlocked and can't be trusted." and "The device is now booting" prompt. I let it rest for more than 3 hours, but nothing happened.
So: none of the categories in the poll apply to me: I seem to get the update, but cannot install it.
Click to expand...
Click to collapse
Are you also on the L29?
Which country are you in?
Did you root or unlock the bootloader?
Apad121 said:
Are you also on the L29?
Which country are you in?
Did you root or unlock the bootloader?
Click to expand...
Click to collapse
I finally figured what was wrong: I had a bad (as in not accepted by the system) update in the dload folder of the sdcard. Thus even after flashing TWRP via adb or the stock firmware upgrade, that was tried and denied, first.
Once I removed that folder, I could successfully install TWRP and the latest CM/Lineage build (alpha-4).
To actually answer your questions: Yes, CH, and yes, bootloader unlocked.
563 arrived for L29C636
Sent from my HUAWEI NXT-L29 using Tapatalk
qwerty1q said:
563 arrived for L29C636
Sent from my HUAWEI NXT-L29 using Tapatalk
Click to expand...
Click to collapse
Any link to the files ? Instructions ?
Hi there
On the firmware downloader app, a new update has been launched but it is B330? Emui 4.1?
Take a look below
Apad121 said:
Hi there
I am still on build NXT - L29C636B193 with June secuirity patch.
I have the dual SIM L29 4gb gold variant. I am in the UK.
Still waiting for Nougat. From reading around it seems that almost everyone has already recieved the official OTA...
I have also seen people manually flashing the OTA but I am worried I may lose my warranty and make certain apps like Android Pay unavailable.
All advice is appreciated
Thanks:laugh:
Click to expand...
Click to collapse
I had manually uppdated to B521 and tried to update to B563 trough the Firmware Finder without success.
Then I downgraded to B193, tried update to B563 and failed.
Updated to B211 then and did factory reset. After restart I got new firmware showing in system update in settings.
So I´m guessing it´s official OTA update as I didn´t update through Firmware Finder.
Apad121 said:
Hi there
On the firmware downloader app, a new update has been launched but it is B330? Emui 4.1?
Take a look below
Click to expand...
Click to collapse
I was on L29C185B180, and the 321 update (4.1) just hit my phone on Thursday.
I recieved my OTA update today on from NXT L29636211 to b563 im in the UK with China dual sim international Mate 8 purchased from wonda mobile. Went very smoothly. Now enjoying official Nougat.
i rebranded my FRD-L19C900B141 to FRD-L19 with the help of re branding guide. i was then able to receive update of 1.3 GB which was apparently a mistake to do. i updated , it went smoothly but then now i'm missing Update Option and feature like smart key. i tried to flash recovery now, and it says remote command cannot be executed. i have frp and phone both unlocked and fastboot and adb both are detecting the device. Please Help
amansaini said:
i rebranded my FRD-L19C900B141 to FRD-L19 with the help of re branding guide. i was then able to receive update of 1.3 GB which was apparently a mistake to do. i updated , it went smoothly but then now i'm missing Update Option and feature like smart key. i tried to flash recovery now, and it says remote command cannot be executed. i have frp and phone both unlocked and fastboot and adb both are detecting the device. Please Help
Click to expand...
Click to collapse
yes , U did a mistake after re-brand you had to receive the 2.2 GB update , this occurs because you didn't dload the official firmware of EMUI 4.1 after re-brand .and currently your build number will be in NRDM test keys . you wont receive any update , lacks of lot of feature , phone hangs a lot and drains .
So, do a thing just rollback to mash-mellow EMUI 4.1 FRD-L19C432B131 and from there make sure you are getting the update more than 2 GB ,if not just dload again the official firmware of B131 and again reset and see this time you will definitely get the right package .
INSTALL and enjoy.
dileepxdn said:
yes , U did a mistake after re-brand you had to receive the 2.2 GB update , this occurs because you didn't dload the official firmware of EMUI 4.1 after re-brand .and currently your build number will be in NRDM test keys . you wont receive any update , lacks of lot of feature , phone hangs a lot and drains .
So, do a thing just rollback to mash-mellow EMUI 4.1 FRD-L19C432B131 and from there make sure you are getting the update more than 2 GB ,if not just dload again the official firmware of B131 and again reset and see this time you will definitely get the right package .
INSTALL and enjoy.
Click to expand...
Click to collapse
I tried , I got an update of package 3.4 GB , then when I updated it , same thing happened. It's again on NRDM
amansaini said:
I tried , I got an update of package 3.4 GB , then when I updated it , same thing happened. It's again on NRDM
Click to expand...
Click to collapse
Well , the reason I was not able to flash again with error , remote command not allowed was somehow the phones bootloader was not unlocked when it was showing unlocked. So unlocked the bootloader again and flashed the recovery.
About all the features , I had to reset the firmware from with in the settings , it deleted the os. So then I went to recovery and flashed official FRD-L19C432B131 and then I got the update of 2.4 GB in update update app, 2.4 GB is the correct one, not the 1.4 or 3.4. after updating I'm quite happy now. :laugh:
It seems like there are a few people having trouble going back to stock and getting everything working.
As always, this requires an unlocked bootloader. If you don't have an unlocked bootloader then search google for a $5 service that does. It is what I did.
I flashed Project treble on my TA-1054. It worked great except it kept saying "insert SIM" when there was already a sim card inside, so I could not use it.
I tried to go back to stock but that firmware file on that google drive thread was corrupted, bad upload. Took me a few days to source this original firmware.
There is a tool called OST ( around 115MB), and a patch that comes with it (the smaller file less than 1MB)
The firmware is almost 2 GB
Download everything, including firmware.
1. Install the OST tool.
2. Replace the EXE file in the program files with the patch file you downloaded.
3. Delete the Onlineupdatetoolexe.config file. If you don't do this, the program will not start correctly.
4. Put phone into download mode ( either by powering it off, pluging into USB cable and immediately hold power and volume down. Or if you can boot into android with ADB debugging, just do a adb reboot bootloader.
5. Pick firmware file and click next.
THe first 2 times I tried this, It hanged at the last second. Third time was a charm. Give it time. Use a good USB cable.
I assume that this is the same way to flash other firmware files for other devices.
As soon as i get my hands on a android one firmware, I will flash it.
Or if anyone can guide me on how to extract the firmware on my TA-1045 USA version and flash it to my TA-1054 Chinese , let me know. Cheers.
Google drive folder with all the files I uploaded.
https://drive.google.com/open?id=1NbzO6lfSGacjM2wqrtBg3jMpljsZswne
Thanks bro...I am downloading it.
PL2-2380-0-00WW-B01.NBx.zip is global firmware name. firmware size is 4gb.
thanks! for extract is with nb0 tools FIH Mobile v3.4
https://drive.google.com/open?id=1cSgjrZUxIsN7oLbo7AP-RnILDZdswmB-
its android one firmware. I have no tool for flash...plz try and let me know
Flashing now. Will report back after flashing is done. thanks!!
Edit: Looks like the version I have for OST does not read NBX files. Will try to update that and report back. I have ntool but no working username password
I cannot flash the NBX file. I changed it to nb0 but OST LA says cannot read firmware. Is there any other way to flash?
EDIT: I went ahead and purchased a bunch of credits for NTOOL.
I will flash and see if it works!
It fails with the mdtp.img partition (no such partition) . I would think that it would just skip that partition but it did not. I will later try to extract and flash separately
For some reason when I try to flash the golabl firmware using ntool, my bootloader gets locked after the mdtp flashing fails and I have to re-unlock my bootloader and flash the original 7.1 chinese firmware using the OLD version of OST. ( the new one kept saying firmware corrupt)
When I bought the credits for Ntool, I also got access to the downloads section so I will be uploading all the firmwares they have, ( there is like 5 different ones)
I was reading how the nokia &+ users are converting their chinese variants to global variants using the android P beta rom.
We also have a P beta rom so I will be trying to install that to see if it works or not.
As some of you may realize, I am determined to make this happen! The reason is because my USA android One version has only 3gb of ram but the chinese version comes with 4GB.
stealthj said:
For some reason when I try to flash the golabl firmware using ntool, my bootloader gets locked after the mdtp flashing fails and I have to re-unlock my bootloader and flash the original 7.1 chinese firmware using the OLD version of OST. ( the new one kept saying firmware corrupt)
When I bought the credits for Ntool, I also got access to the downloads section so I will be uploading all the firmwares they have, ( there is like 5 different ones)
I was reading how the nokia &+ users are converting their chinese variants to global variants using the android P beta rom.
We also have a P beta rom so I will be trying to install that to see if it works or not.
As some of you may realize, I am determined to make this happen! The reason is because my USA android One version has only 3gb of ram but the chinese version comes with 4GB.
Click to expand...
Click to collapse
can u flash my chinese rom which is nbo format via ntool. I have have ntool but i dont have user name,password, i downloaded rom which u provide.my device still cant connect to mobile data.
NBX format only works on Ntool. but Ntool needs working user name and password to works. OST cant read or flash Nbx format.
if u get Ntool with working user id .. then plz flash my device also via remote mode like teamviewer.
Ntool Bricked my device. the only real restore you can do is by using ost with the stock chinese firmware. edit your apn. why is your data not working?
Global rom cant flash via ntool in Ta1054..showed error in partition. if it will be solved then china to global will be easy process..
I'm eagerly watching your progress. I'm in the same boat sitting on a TA-1054 wanting to get on Oreo without chinese firmware :x
Keep up the good work. It is really appreciated!
Edit: By the way, are the custom and original chinese firmware files available anywhere?
I saw someone mention a firmware in the google drive for TA-1054 but I'm uncertain whether that is the official one or the custom one.
Its the Chinese official ROM you get it from Google drive folder in Nokia 6 mena firmware topic
safron35 said:
Its the Chinese official ROM you get it from Google drive folder in Nokia 6 mena firmware topic
Click to expand...
Click to collapse
Actually, the one in the mena topic was corrupted for me.
I have uploaded a good version in the first post of this thread. I've only had success flashing it wih OST.
But yesterday Ntool bricked my phone. No download mode, no screen, no usb recognition with windows. I am not really sure what to do now. If i can't get my pc to recognize it then the phone might be dead./ I may do a warranty exchange when i go visit china next month but if they check my bootloader, they will void my warranty. anyone know how to unbrick?
Also. The nokia 7+ forums said that if you flash the android P beta rom, then the chinese vaqriant becomes gloabl.
I went ahead and downloaded the android P beta for 6.1 but now that the phone is bricked I can't really test anything. I will sell my extra 1045 before i get curious and brick that too.
stealthj said:
Actually, the one in the mena topic was corrupted for me.
I have uploaded a good version in the first post of this thread. I've only had success flashing it wih OST.
But yesterday Ntool bricked my phone. No download mode, no screen, no usb recognition with windows. I am not really sure what to do now. If i can't get my pc to recognize it then the phone might be dead./ I may do a warranty exchange when i go visit china next month but if they check my bootloader, they will void my warranty. anyone know how to unbrick?
Also. The nokia 7+ forums said that if you flash the android P beta rom, then the chinese vaqriant becomes gloabl.
I went ahead and downloaded the android P beta for 6.1 but now that the phone is bricked I can't really test anything. I will sell my extra 1045 before i get curious and brick that too.
Click to expand...
Click to collapse
Can you share the link for P beta for 6.1?
Also, I own a TA-1054 model and I am in India. I ordered it from Amazon. It had Android One Oreo firmware preinstalled before I messed up and got loops. Later I flashed a GSI to at least boot it up.
TheImpulson said:
Can you share the link for P beta for 6.1?
Also, I own a TA-1054 model and I am in India. I ordered it from Amazon. It had Android One Oreo firmware preinstalled before I messed up and got loops. Later I flashed a GSI to at least boot it up.
Click to expand...
Click to collapse
Ahh I see. For some reason my sim slots were not working for me with GSI. But mine is dead now, so nothing I can do.
Here is the P link.
https://drive.google.com/open?id=1R5n-JAU_dzKEQ6w0W9ncDr58dqaAKFoc
stealthj said:
Ahh I see. For some reason my sim slots were not working for me with GSI. But mine is dead now, so nothing I can do.
Here is the P link.
https://drive.google.com/open?id=1R5n-JAU_dzKEQ6w0W9ncDr58dqaAKFoc
Click to expand...
Click to collapse
How to flash it?
Edit: Also OnlineUpdaterTool in your 1st post asks for a password. What's the password?
nooby_pls said:
I'm eagerly watching your progress. I'm in the same boat sitting on a TA-1054 wanting to get on Oreo without chinese firmware :x
Keep up the good work. It is really appreciated!
Edit: By the way, are the custom and original chinese firmware files available anywhere?
I saw someone mention a firmware in the google drive for TA-1054 but I'm uncertain whether that is the official one or the custom one.
Click to expand...
Click to collapse
I put the original chinese firmware on the first post.
There is an option to install google play store, but that would make your rom unable to receive updates.
I have a seemingly stupid but still annoying problem. As many of you know Android 8 + EMUI 8 came out this summer and I have updated my Honor8. Everything works well, even better (especially with regard to the battery) apart from a problem, quite annoying. I have seen that everyone around complains about the same problem, so it is clear that both a build bug and not a local problem.
Basically ... the bluetooth link with the multimedia system of my car doesn't work as it should, while it worked well with the 7.0.
Tracknames, music infos disappears, sometimes it connects regularly, starting the music, sometimes nothing happens, sometimes the music passes from the car speakers to smartphone (!!)... in short, manage the music in the car It has become a big problem!
I tried all possible options; reset pairing, reset bluetooth, clear cache, activate the developer options to control some low-level aspects of bluetooth, and finally installed Bluetooth Auto Connect which also has several advanced options. Nothing works. In the meantime an update of 8.0 has been released (mine is the buiold 521). The update came out in September ... maybe (MAYBE) this update fixes all bluetooth issues (but i don't have any detailed info about). Until today I have not received any updates and normally I check new version regularly every day. At this point I decided to return to Nougat!
And here the adventure begins!
I CANNOT IN ANY WAY do the downgrade.
What I tried:
- through HiSuite. The "back to previous version" option appears random (rarely); normally the program tells me "the system is up to date". Once appeared I tried to run the procedure, but after the decompression it gives me an error "error updating".
- by standard Rollback procedure. Using a microSD and putting the full version of Nougate in the dload folder. The installation starts but stops almost immediately with the same "update cannot be applied" error.
At this point I am desperate. I cannot update Oreo, I can't go back to Nougat and meanwhile the bluetooth still doesn't work with my car. Remember that before Oreo, everything worked very well!
What can I do? Can you help me?
Thank you
hi / i can help u / pls say me this:
your region(Ru/Eu/Cn.......)
your model( FRD-L09/L19/L04........)
Your Build number
and which build you upgrade to emui 8
m2relax said:
hi / i can help u / pls say me this:
your region(Ru/Eu/Cn.......)
your model( FRD-L09/L19/L04........)
Your Build number
and which build you upgrade to emui 8
Click to expand...
Click to collapse
Region: EU
Model: FRD-L09
Build: 8.0.0.521 (C432)
Previous Build: don't remember. It was Nougat, and I've upgraded around the first week of September. From that day I haven't received/applied any patch, because nothing appears until now.
This morning I've tried again with HiSuite. As usual it says I'm running the latest version and it doesn't offer any downgrade option .
Thelothian said:
Region: EU
Model: FRD-L09
Build: 8.0.0.521 (C432)
Previous Build: don't remember. It was Nougat, and I've upgraded around the first week of September. From that day I haven't received/applied any patch, because nothing appears until now.
This morning I've tried again with HiSuite. As usual it says I'm running the latest version and it doesn't offer any downgrade option .
Click to expand...
Click to collapse
dont worry/ do u change region of your phone past?
m2relax said:
dont worry/ do u change region of your phone past?
Click to expand...
Click to collapse
Never. And never jailbroken or rooted...
Thelothian said:
Never. And never jailbroken or rooted...
Click to expand...
Click to collapse
ok / pls do this work step by step :
1-Get Unlock Code for your Phone
2-Unlock your phone with Unlock Code
3-install TWRP recovery
4-after install TWRP notice me to send a file for u ( u must flash it from recovery TWRP )
5-after flashing u most install recovery stock
6-End and your problem is done! :fingers-crossed:
m2relax said:
ok / pls do this work step by step :
1-Get Unlock Code for your Phone
2-Unlock your phone with Unlock Code
3-install TWRP recovery
4-after install TWRP notice me to send a file for u ( u must flash it from recovery TWRP )
5-after flashing u most install recovery stock
6-End and your problem is done! :fingers-crossed:
Click to expand...
Click to collapse
I Heard TWRP doesn't work well on Oreo...
CurlyApple said:
I Heard TWRP doesn't work well on Oreo...
Click to expand...
Click to collapse
no if you use multi tools 8 for install twrp its work perfectly on oero
m2relax said:
no if you use multi tools 8 for install twrp its work perfectly on oero
Click to expand...
Click to collapse
The more you know...
Finally I've decide to try updating to 8.0.0.562. After a month of tries, fails (damn Huawei and his stupid update system), errors and a lot of other stupid things, I was finally able to update my Honor hoping the latest version will fix all the problems. It was a enormous waste of time (searching around internet)... but in the end I found a method described here: https://forum.xda-developers.com/huawei-p20-pro/help/p20-pro-bricked-t3868085#4And if you go ahead you should find the correct firmware link (on a Russian site). Although, IMHO, failing with the classic method was due to the impossibility or some bugs in the update system, to unpack the update files on sdcard. So the solution seems to be to leave both the zip and the unpacked folder.The problems with bluetooth remain, but I hope that now there is not to be crazy applying next updates. ATTENTION: the method above is NOT valid for rollback! If you try, you'll brick your Honor.
And finally I've taken an important decision... for me this is the last Huawei/honor device. Next time I'll go to another brand, with a serious update system.
Hello,
I have the same problem whit my honor, bluetooth lost signal random times, and my battery is faster get low, on android 7 i dont feel thees problems. Anyone have an idea how can i downgrade to nougat or marshmallow? My phone infos:
-FRD-L09 8.0.0.521(C432), I bought it in Hungary (i think its an EU modell), the phone have an unlocked bootloader, and flashed whit TWRP recovery
Who know the solution, pls reply here or, write me an email. Big thanks
scseke said:
Hello,
I have the same problem whit my honor, bluetooth lost signal random times, and my battery is faster get low, on android 7 i dont feel thees problems. Anyone have an idea how can i downgrade to nougat or marshmallow? My phone infos:
-FRD-L09 8.0.0.521(C432), I bought it in Hungary (i think its an EU modell), the phone have an unlocked bootloader, and flashed whit TWRP recovery
Who know the solution, pls reply here or, write me an email. Big thanks
Click to expand...
Click to collapse
flash this file with twrp and install stock recovery and do reset factor / finally use hisuite to rollback