Related
This started with a brand new Boost Mobile Moto G (XT1031).
It was taken right from the box and unlocked using oem unlock.
After the unlock it booted to the stock image then was powered off and booted to fastboot.
Once in fastboot TWRP 2.7.1.0 recovery was flashed.
When trying to boot into recovery it would only loop.
Tried to boot normally and it would only loop.
Flashed the device back to stock using all the available firmwares from sbf.droid-developers.org for Boost US and it still wont boot.
Tried other recovery images and the only one I was able to get working was Philz Touch 6.55.
Wiped and formated everything and rebooted the phone and it went straight to recovery.
Using Philz recovery tried to install CyanogenMod 11 and bool loop proceeded.
I took another working Moto G and flashed Philz recovery and made a back up onto a usb drive using an otg cable.
On the broken device tried to restore from the backup and it said it was completed but it ran way to fast and didn't seem to restore completely and failed to boot.
I've gone through every method of recovery i could find and nothing seems to be working
This phone is kicking my butt, any help would be greatly appreciated.
manicresin said:
This started with a brand new Boost Mobile Moto G (XT1031).
It was taken right from the box and unlocked using oem unlock.
After the unlock it booted to the stock image then was powered off and booted to fastboot.
Once in fastboot TWRP 2.7.1.0 recovery was flashed.
When trying to boot into recovery it would only loop.
Tried to boot normally and it would only loop.
Flashed the device back to stock using all the available firmwares from sbf.droid-developers.org for Boost US and it still wont boot.
Tried other recovery images and the only one I was able to get working was Philz Touch 6.55.
Wiped and formated everything and rebooted the phone and it went straight to recovery.
Using Philz recovery tried to install CyanogenMod 11 and bool loop proceeded.
I took another working Moto G and flashed Philz recovery and made a back up onto a usb drive using an otg cable.
On the broken device tried to restore from the backup and it said it was completed but it ran way to fast and didn't seem to restore completely and failed to boot.
I've gone through every method of recovery i could find and nothing seems to be working
This phone is kicking my butt, any help would be greatly appreciated.
Click to expand...
Click to collapse
What did you use to flash? fastboot or mfastboot?
280
oversleeper said:
What did you use to flash? fastboot or mfastboot?
Click to expand...
Click to collapse
I used mfastboot.
http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
Try to use the bootloader refresh tool, for someone worked.:good:
oversleeper said:
http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
Try to use the bootloader refresh tool, for someone worked.:good:
Click to expand...
Click to collapse
I ran the bootloader refresh after modifying the bat file for the correct cpu.
The boot loader version is showing it was updated but the device is still not booting.
[EDIT] I did try to reflash the stock frimware and there where some erros i wasnt getting before
Code:
C:\falcon_boost_user_4.4.2>mfastboot.exe flash aboot emmc_appsboot.mbn
sending 'aboot' (512 KB)...
OKAY [ 0.051s]
writing 'aboot'...
Preflash validation failed
FAILED (remote failure)
finished. total time: 0.335s
Code:
C:\falcon_boost_user_4.4.2>mfastboot.exe flash motoboot motoboot.img
sending 'motoboot' (1940 KB)...
OKAY [ 0.111s]
writing 'motoboot'...
Motoboot: Preflash validation for tz
Preflash validation failed
FAILED (remote failure)
finished. total time: 0.407s
On a whim I decided to try the retail firmware and was able to get the phone to boot to stock, but I tried to load TWRP again and it went back to the boot looping state.
I really don't understand what is wrong with this phone because this are for the company I work for and we have flash about a thousand this exact same way and have never ran into this issue.
I am going to try philz recovery to see if it cause the normal boot process to break and if not I try loading the a custom rom from there.
manicresin said:
I ran the bootloader refresh after modifying the bat file for the correct cpu.
The boot loader version is showing it was updated but the device is still not booting.
[EDIT] I did try to reflash the stock frimware and there where some erros i wasnt getting before
Code:
C:\falcon_boost_user_4.4.2>mfastboot.exe flash aboot emmc_appsboot.mbn
sending 'aboot' (512 KB)...
OKAY [ 0.051s]
writing 'aboot'...
Preflash validation failed
FAILED (remote failure)
finished. total time: 0.335s
Code:
C:\falcon_boost_user_4.4.2>mfastboot.exe flash motoboot motoboot.img
sending 'motoboot' (1940 KB)...
OKAY [ 0.111s]
writing 'motoboot'...
Motoboot: Preflash validation for tz
Preflash validation failed
FAILED (remote failure)
finished. total time: 0.407s
Click to expand...
Click to collapse
Pretty normal, you got errors because you upgraded the bootloader to the last version, so you can't downgrade it. Now you can: try to flash the 4.4.2 stock boost version (without flashing gpt.bin and motoboot.img) or if doesn't work due to upgraded bootloader, just wait few days until the 4.4.4 firmware for boost will be downloadable. It's already realeased don't worry, look https://motorola-global-portal.custhelp.com/app/answers/indevice_detail/a_id/100754/p/30,6720,9050
EDIT: It's a boost version, it's pretty different... You can't flash whatever you want so easily... search for some guide, I can't help about boost version.
The boost 4.4.2 stock firmware failed but the retail version worked, I'm try that with philz recovery to see if I can get CM 11 to work. If that fails ill wait for the 4.4.4 boost firmware.
Thanks for the help
I know some people love TWRP and only use TWRP and some people only use ClockWorkMod Recovery, but since you've been trying with TWRP humour me and flash this, it's the latest ClockWorkMod Recovery 6.0.5.0 compiled from source.
Flash it then try to flash a CM nightly or something like that...clear cache and dalvik cache first then do a factory reset then flash.
ClockWorkMod Recovery 6.0.5.0
CodyF86 said:
I know some people love TWRP and only use TWRP and some people only use ClockWorkMod Recovery, but since you've been trying with TWRP humour me and flash this, it's the latest ClockWorkMod Recovery 6.0.5.0 compiled from source.
Flash it then try to flash a CM nightly or something like that...clear cache and dalvik cache first then do a factory reset then flash.
Click to expand...
Click to collapse
I downloaded your recovery image and flashed it, wiped everything and reset.
Installed cm-11-20140903-NIGHTLY-falcon from usbdisk, it said completed only after ~20 seconds but there where no errors.
Rebooted the device and the cyanogenmod animated boot logo was displayed.
The phone booted fine was is working, now to try and see if I can get my image loaded.
Thanks for the recommendation, I didn't think to try CWM since Philz recovery is based on it, but it failed to load CM 11.
I used the toolkit to flash the stock CM image as phone is stuck at one plus one logo . Flashing the stock worked without any errors after phone rebooted it's still stuck in bootloop. Is that means phone needs RMA, I can get into fastboot and recovery ..
I think you should come take a peak at my thread. Your issue sounds familiar
http://forum.xda-developers.com/showthread.php?p=55488755
So by issuing these commands
fastboot erase persist
fastboot flash persist persist.img
and flashing OS will fix the bootloop issue ??
I am getting this error " finished. total time: 0.009s
error: failed to load 'cm-11.0-XNPH30O-bacon-signed-fastboot.zip': No such file
or directory" but the file is in the location ..
sguy156 said:
I am getting this error " finished. total time: 0.009s
error: failed to load 'cm-11.0-XNPH30O-bacon-signed-fastboot.zip': No such file
or directory" but the file is in the location ..
Click to expand...
Click to collapse
Did you try rebooting after flashing the persist?
If yes and you still have no is download 38r and flash it instead
https://forums.oneplus.net/threads/38r-factory-images-now-available.147875/
Hello,
I think my XT1541 (16GB/2GB Retail GB) with locked bootloader might be hard-bricked.
I was running the stock 5.11 firmware when I did the 6.0 update and since then my phone is stuck in a bootloop.
Motorola won't repair it because I had to replace the screen and the phone is out of warranty.
I can access the bootloader but if I select recovery mode the phone just keeps bootlooping and I can't get into recovery.
I followed the instructions here to flash a stock firmware using fastboot. All the steps complete successfully but after rebooting, the phone is still stuck in a bootloop and I can't get into recovery.
I wanted to install a custom recovery but I'm unable to unlock my bootloader because of this error:
Code:
(bootloader) Check 'Allow OEM Unlock' in Developer Options.
FAILED (remote failure)
Obviously I can't check that option as the phone won't boot.
So, is it hard bricked? Is there anything I can do to get my phone to work again?
Thanks a lot for your help!
How many system images do you need to flash? Sometimes there can be more than 6, sometimes there can be fewer.
sticktornado said:
How many system images do you need to flash? Sometimes there can be more than 6, sometimes there can be fewer.
Click to expand...
Click to collapse
I know, I flashed the correct number of system images that were in the zip file.
Thanks,
rent0n said:
Hello,
I think my XT1541 (16GB/2GB Retail GB) with locked bootloader might be hard-bricked.
I was running the stock 5.11 firmware when I did the 6.0 update and since then my phone is stuck in a bootloop.
Motorola won't repair it because I had to replace the screen and the phone is out of warranty.
I can access the bootloader but if I select recovery mode the phone just keeps bootlooping and I can't get into recovery.
I followed the instructions here to flash a stock firmware using fastboot. All the steps complete successfully but after rebooting, the phone is still stuck in a bootloop and I can't get into recovery.
I wanted to install a custom recovery but I'm unable to unlock my bootloader because of this error:
Code:
(bootloader) Check 'Allow OEM Unlock' in Developer Options.
FAILED (remote failure)
Obviously I can't check that option as the phone won't boot.
So, is it hard bricked? Is there anything I can do to get my phone to work again?
Thanks a lot for your help!
Click to expand...
Click to collapse
If u are bootlooping when trying to enter recovery , then prolly the recovery is the issue. I'd suggest flash the recovery.IMG again and then proceed with flashing the rest of the .IMG files.
prasi.ram10 said:
If u are bootlooping when trying to enter recovery , then prolly the recovery is the issue. I'd suggest flash the recovery.IMG again and then proceed with flashing the rest of the .IMG files.
Click to expand...
Click to collapse
So basically:
Code:
fastboot flash recovery recovery.img
fastboot reboot
and then check if I can access recovery? Or issue that command and then all the other fastboot commands in the guide?
prasi.ram10 said:
If u are bootlooping when trying to enter recovery , then prolly the recovery is the issue. I'd suggest flash the recovery.IMG again and then proceed with flashing the rest of the .IMG files.
Click to expand...
Click to collapse
So basically:
Code:
fastboot flash recovery recovery.img
fastboot reboot
and then check if I can access recovery? Or issue that command and then all the other fastboot commands in the guide?
rent0n said:
So basically:
Code:
fastboot flash recovery recovery.img
fastboot reboot
and then check if I can access recovery? Or issue that command and then all the other fastboot commands in the guide?
Click to expand...
Click to collapse
I tried that and it didn't work. When I try to go into recovery mode the phone keeps bootlooping.
One thing I noticed is that when I try to format cache or userdata I get this error:
Code:
$ fastboot format cache
formatting 'cache' partition...
Formatting is not supported for filesystem with type 'raw'.
FAILED ()
finished. total time: 0.013s
I think there might be something wrong with the file system in my partitions. How can I manually format my partitions?
Thanks,
man , if you really need recovery, type fastboot boot recovery.img . It will temporaily boot you into stock recovery. Wipe cache and data there
therealduff1 said:
man , if you really need recovery, type fastboot boot recovery.img . It will temporaily boot you into stock recovery. Wipe cache and data there
Click to expand...
Click to collapse
Thanks, but this is what I get when I try do do that:
Code:
$ fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 0.736s]
booting...
FAILED (remote failure)
finished. total time: 0.746s
There must be a way to restore this phone to a working state! I can't believe it's so messed up after an official update...
rent0n said:
Thanks, but this is what I get when I try do do that:
Code:
$ fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 0.736s]
booting...
FAILED (remote failure)
finished. total time: 0.746s
There must be a way to restore this phone to a working state! I can't believe it's so messed up after an official update...
Click to expand...
Click to collapse
What os were you running when the phone screwed up ?
therealduff1 said:
What os were you running when the phone screwed up ?
Click to expand...
Click to collapse
I was running 5.1.1 when I got the notification for the 6.0 update.
I've noticed that trying to flash 5.1.1 firmware with fastboot gives me errors (preflash validation failed) while the 6.0 work "fine" (i.e.: I get OKAY after every step but then the phone is always stuck in a bootloop).
Thanks!
DO NOT ATTEMPT TO DOWNGRADE BOOTLOADER.IMG OR GPT.IMG !!!!!!! DONT FLASH LOLLIPOP VERSION OF THOSE FILES ON A DEVICE RUNNING 6.0
plz tell me u didnt flash those files..
therealduff1 said:
DO NOT ATTEMPT TO DOWNGRADE BOOTLOADER.IMG OR GPT.IMG !!!!!!! DONT FLASH LOLLIPOP VERSION OF THOSE FILES ON A DEVICE RUNNING 6.0
plz tell me u didnt flash those files..
Click to expand...
Click to collapse
Well I wasn't sure what version I was running to be honest so I think I tried to flash the gpt.img from 5.1.1 at some point but it failed with the preflash validation failure. I've always only flashed the 6.0 firmware files.
rent0n said:
Well I wasn't sure what version I was running to be honest so I think I tried to flash the gpt.img from 5.1.1 at some point but it failed with the preflash validation failure. I've always only flashed the 6.0 firmware files.
Click to expand...
Click to collapse
Have you gave this a try?
heavy_metal_man said:
Have you gave this a try?
Click to expand...
Click to collapse
Yes, no luck unfortunately.
I think I might have flashed the 5.1.1 bootloader after all - is there any way to recover from there?
Thanks,
Bump!
Does anyone have any other suggestion please?
Thanks,
Last bump
I'm going to sell this on eBay as non-working then unless someone comes up with a clever solution?
Thanks for your help!
Try flashing once more starting with the gpt.bin (that should hopefully take care of raw partition error) and skipping the bootloader altogether. Also, may be worthwhile to try mfastboot.exe instead of fastboot.exe.
I have this same issue, but I haven't flash 5.1.1 Files, I Only tried with 6.0 Brazil Retail.
I also tried to flash gpt to get rid of the "raw" partition, everything goes ok but still displaying that error. Anyone can help?
I got the same problem with my Moto E 2015... If I find a solution I will reply it in this topic..
Problem with oopof1 phone
I have made Rom for the wrong phone oppof1f and the phone has stopped on this logo
I do not move I have stood on this and I can not enter the recovery permanently, what is the solution?
And sorry if the subject is not in place
Picture of the problem
store6.up-00.com/2017-05/149603505807811.png
So it looks like its trying to install the rom.
if you cant enter recovery.
extract the recovery.img for the stock rom in the link below
boot into fastboot (power and volume up) then,
fastboot flash recovery recovery.img
if you can enter recovery do this.
Turn off the phone and put this rom for the f1f on the micro sd card.
http://community.oppo.com/en/forum.php?mod=viewthread&tid=46153
then hold the power button and volume down and it should come up with a langauge to pick.
then press install from sd card.
select the rom.
if it fails keep trying. u can also try wiping data and cache
Jamie_oppo said:
So it looks like its trying to install the rom.
if you cant enter recovery.
extract the recovery.img for the stock rom in the link below
boot into fastboot (power and volume up) then,
fastboot flash recovery recovery.img
if you can enter recovery do this.
Turn off the phone and put this rom for the f1f on the micro sd card.
http://community.oppo.com/en/forum.php?mod=viewthread&tid=46153
then hold the power button and volume down and it should come up with a langauge to pick.
then press install from sd card.
select the rom.
if it fails keep trying. u can also try wiping data and cache
Click to expand...
Click to collapse
When you press the power button and the volume down, this message appears
Store6.up-00.com/2017-05/149603505807811.png
And unable to enter into recovery
Unable to access your phone
up up up up
If fastboot mode is working, you can try to boot another recovery (twrp, with fastboot boot twrp.img) and wipe the cache partition (that might have update information on it).
If it's not enough, I'd try to wipe data. But before that, try to backup things while TWRP is working.
tarek.eid said:
up up up up
Click to expand...
Click to collapse
Can you boot unto fast boot using power and volume up?
kdd998 said:
If fastboot mode is working, you can try to boot another recovery (twrp, with fastboot boot twrp.img) and wipe the cache partition (that might have update information on it).
If it's not enough, I'd try to wipe data. But before that, try to backup things while TWRP is working.
Click to expand...
Click to collapse
Yes FastBoot mode works
And when working twrp.img recovery
Of this site
Https://twrp.me/devices/oppof1.html
But there is a problem with the message
Target reported max download size of 268435456 bytes
Sending 'recovery' (25858 KB) ...
OKAY [1.142s]
Writing 'recovery' ...
FAILED (remote: Partition flashing is not allowed)
Finished. Total time: 1.157s
Can you explain
Clear the cache section
Jamie_oppo said:
Can you boot unto fast boot using power and volume up?
Click to expand...
Click to collapse
Yes I know how to login to FastBoot mode
But this message appears after the steps are executed
Target reported max download size of 268435456 bytes
Sending 'recovery' (25858 KB) ...
OKAY [1.142s]
Writing 'recovery' ...
FAILED (remote: Partition flashing is not allowed)
Finished. Total time: 1.157s
tarek.eid said:
Yes I know how to login to FastBoot mode
But this message appears after the steps are executed
Target reported max download size of 268435456 bytes
Sending 'recovery' (25858 KB) ...
OKAY [1.142s]
Writing 'recovery' ...
FAILED (remote: Partition flashing is not allowed)
Finished. Total time: 1.157s
Click to expand...
Click to collapse
Type fastboot oem unlock then repeat
Jamie_oppo said:
Type fastboot oem unlock then repeat
Click to expand...
Click to collapse
This message has not been opened
FAILED (remote: oem unlock is not allowed)
Finished. Total time: 0.009s
tarek.eid said:
This message has not been opened
FAILED (remote: oem unlock is not allowed)
Finished. Total time: 0.009s
Click to expand...
Click to collapse
Looks like you have a locked bootloader with unlocking disabled via developer options. With bootloader locked,no recovery and cant boot to rom to enable bootloader unlocking you only real option is to follow instuctions in this post to flash back to original stock firmware using low level QDloader to flash entire phone in factory mode.
PS This is only for f1f not f1s. You do have a f1f, right?
MiniBlu said:
Looks like you have a locked bootloader with unlocking disabled via developer options. With bootloader locked,no recovery and cant boot to rom to enable bootloader unlocking you only real option is to follow instuctions in this post to flash back to original stock firmware using low level QDloader to flash entire phone in factory mode.
PS This is only for f1f not f1s. You do have a f1f, right?
Click to expand...
Click to collapse
Yes my phone is f1f
I will carry
Https://drive.google.com/file/d/0B3vGskcdFbBcVThPS3FIb2dkdGs/view?usp=drivesdk
I will try
Take you
There is a problem with these definitions
Qualcomm HS-USB QDLoader 9008 (COM5
A triangle sign appears that needs to be defined
Does this affect
Even if it has a possible impact on its definition
tarek.eid said:
There is a problem with these definitions
Qualcomm HS-USB QDLoader 9008 (COM5
A triangle sign appears that needs to be defined
Does this affect
Even if it has a possible impact on its definition
Click to expand...
Click to collapse
You need to follow the instruction in the post I linked and "Install the QDLoader driver found in the DRIVER directory of the extracted archive". If its using the correct drivers the triangle should not be there. (you mean in contol panel?)
If you have problems PM the quy who posted the link. He said he would help.
Hello! I tried to root my Honor 6x (BLN-L21, EMUI 5.0) following the instructions there:
cyberkey.in/how-to-root-honor-6x-100-working/
The bootloader was successfully unlocked.
But when I tried to flash TWRP the process failed and now my phone is stuck on boot :
"Your device has been unlocked and can't be trusted [...] Your device is booting now."
I can get access to recovery and fastboot. I wiped the cache and tried a factory reset but nothing changed, my system won't start and I don't know what to do.
Please help!
if you have the boot backup then restore it.
venugopalu007 said:
if you have the boot backup then restore it.
Click to expand...
Click to collapse
I don't have any backup. Is there a way to just reset everything? Also I don't know how to connect to the phone anymore since adb won't find the device.
if you cannot find the boot.img
just do a rollback bro
here is the link
first dload this
http://download-c.huawei.com/download/downloadCenter?downloadId=94070&version=376169&siteCode=de-h
and this now
if your device is BLN-L21C432B151 http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1277/g104/v84712/f1/full/update.zip
or BLN-L21C185B131 http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1277/g104/v75593/f1/full/update.zip
I think that I flashed the wrong files in "boot" and "recovery". Please tell me which files I should flash there.
I used the commands:
.\fastboot flash boot twrp.img
.\fastboot flash recovery twrp.img
Stinks said:
I think that I flashed the wrong files in "boot" and "recovery". Please tell me which files I should flash there.
I used the commands:
.\fastboot flash boot twrp.img
.\fastboot flash recovery twrp.img
Click to expand...
Click to collapse
The guide from "cyberkey.in/how-to-root-honor-6x-100-working/" is simply wrong when it comes to flashing the twrp recovery. If you really followed this guide completely then you flashed the recovery to the boot partition.
Use "fastboot flash recovery twrp.img" to flash the recovery.
You will still have to flash the boot image to your boot partition then (fastboot flash boot boot.img).
Stinks said:
I don't have any backup. Is there a way to just reset everything? Also I don't know how to connect to the phone anymore since adb won't find the device.
Click to expand...
Click to collapse
Use fastboot flash recovery twrpname.img to flash the recovery
Ok so basically I need to flash the boot image. However I don't know where to find the stock boot image. I downloaded the so-called "full version" of the stock firmware that I found here: boycracked.com/2017/07/20/official-huawei-honor-6x-bln-l21-berlin-l21-stock-rom-firmware/
However there was no boot.img file inside.
If you could direct me to the proper stock boot.img or send me one, that would greatly help. I had EMUI 5.0 with Nougat 7.0 I believe, phone version BLN-L21.
V
Stinks said:
Ok so basically I need to flash the boot image. However I don't know where to find the stock boot image. I downloaded the so-called "full version" of the stock firmware that I found here: boycracked.com/2017/07/20/official-huawei-honor-6x-bln-l21-berlin-l21-stock-rom-firmware/
However there was no boot.img file inside.
If you could direct me to the proper stock boot.img or send me one, that would greatly help. I had EMUI 5.0 with Nougat 7.0 I believe, phone version BLN-L21.
Click to expand...
Click to collapse
Bro there is update.app open it with huawei update extractor then you will see the the boot image.but remember the emui 4.1 boot wont help you in emui 5 .the boot.img must be emui 5 once.
venugopalu007 said:
V
Bro there is update.app open it with huawei update extractor then you will see the the boot image.but remember the emui 4.1 boot wont help you in emui 5 .the boot.img must be emui 5 once.
Click to expand...
Click to collapse
Thanks. I successfully updated boot.img and and recovery.img, but system won't load, so I might have imported from the wrong STOCK version.
I tried to reinstall a stock ROM using:
fastboot flash system system.img
But I got this error message:
target reported max download size of 471859200 bytes
sending sparse 'system' (444686 KB)...
OKAY [ 12.901s]
writing 'system'...
FAILED (remote: sparse flash write failure)
finished. total time: 12.929s
Then I tried to erase the system file with "erase system" and got this error:
erasing 'system'...
FAILED (remote: Command not allowed)
finished. total time: 0.013s
I guess that the only option now is to install the files on an external SD card?
Stinks said:
Thanks. I successfully updated boot.img and and recovery.img, but system won't load, so I might have imported from the wrong STOCK version.
I tried to reinstall a stock ROM using:
fastboot flash system system.img
But I got this error message:
target reported max download size of 471859200 bytes
sending sparse 'system' (444686 KB)...
OKAY [ 12.901s]
writing 'system'...
FAILED (remote: sparse flash write failure)
finished. total time: 12.929s
Then I tried to erase the system file with "erase system" and got this error:
erasing 'system'...
FAILED (remote: Command not allowed)
finished. total time: 0.013s
I guess that the only option now is to install the files on an external SD card?
Click to expand...
Click to collapse
Bro y this ,just do a rollback .
Stinks said:
Thanks. I successfully updated boot.img and and recovery.img, but system won't load, so I might have imported from the wrong STOCK version.
I tried to reinstall a stock ROM using:
fastboot flash system system.img
But I got this error message:
target reported max download size of 471859200 bytes
sending sparse 'system' (444686 KB)...
OKAY [ 12.901s]
writing 'system'...
FAILED (remote: sparse flash write failure)
finished. total time: 12.929s
Then I tried to erase the system file with "erase system" and got this error:
erasing 'system'...
FAILED (remote: Command not allowed)
finished. total time: 0.013s
I guess that the only option now is to install the files on an external SD card?
Click to expand...
Click to collapse
I recommend you to download firmware files only from the official honor website or by using the huawei firmware finder(https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146)
In this case try to use huawei firmware finder to get the right stock version for your phone. Download these two files: e.g. update.zip & update_full_BLN-L21_hw_eu.zip.
Export the following image files: recovery, system, boot and cust.
The try to flash them:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot flash recovery recovery.img
If flashing a partition via fastboot fails then it is usually because it's the wrong image or just not made for your phone.
Thank you guys, you saved my phone! I eventually managed to flash the files from Nougat update for European Honor 6X BLN-L21C432B360 that I found there: stechguide.com/honor-6x-b360-nougat-update/
Now the phone is working fine.
Stinks said:
Thank you guys, you saved my phone! I eventually managed to flash the files from Nougat update for European Honor 6X BLN-L21C432B360 that I found there: stechguide.com/honor-6x-b360-nougat-update/
Now the phone is working fine.
Click to expand...
Click to collapse
Glad you revived your phone
question
Stinks said:
Hello! I tried to root my Honor 6x (BLN-L21, EMUI 5.0) following the instructions there:
cyberkey.in/how-to-root-honor-6x-100-working/
The bootloader was successfully unlocked.
But when I tried to flash TWRP the process failed and now my phone is stuck on boot :
"Your device has been unlocked and can't be trusted [...] Your device is booting now."
I can get access to recovery and fastboot. I wiped the cache and tried a factory reset but nothing changed, my system won't start and I don't know what to do.
Please help!
Click to expand...
Click to collapse
my phone is stuck at your device is booting now i cant get to any of other functions such as fastboot or recovry i can only acces it after full charge is gone and after charging.how did you get to acces fastboot or recover.
[email protected] said:
question
my phone is stuck at your device is booting now i cant get to any of other functions such as fastboot or recovry i can only acces it after full charge is gone and after charging.how did you get to acces fastboot or recover.
Click to expand...
Click to collapse
did you solve your issue.....I have same problem now
nokiasatyam said:
did you solve your issue.....I have same problem now
Click to expand...
Click to collapse
Hello, could you be more specific about your problem? I'll be able to help you.
Brief Explanation:
From the screen on which you're stuck, press and hold power button for about 10 seconds to forcibly restart your device. when you see the same screen again, immediately press and hold volume up button(for about 3 seconds) to boot to eRecovery.
> Choose shut down option on eRecovery. press and hold vol down button and insert the charging cable to boot to fastboot.
> Press and hold power and volume up button to boot to recovery. (You could do this even from fastboot screen and the screen you're stuck at).