Related
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Features :
- f2fs formatable support (/data and /cache)
- Lattest kernel from @dev_harsh1998
Downloads:
TWRP-3.1.1 ARM64
TWRP-RECOVERY-3.1.1-0-x64bit.img
Hex Firmware
HEX-FIRMWARE-PATCH.zip
Installation Instruction :
Make Sure You Are On The Latest Hex-Firmware.
Fastboot :
- Turn off your phone, combine power + vol (-) to enter fastboot
- type " fastboot device " to check devices
- type " fastboot flash recovery TWRP-RECOVERY-3.1.1-0-x64bit.img "
- type " fastboot reboot "
TWRP :
- reboot into recovery (TWRP)
- select install image
- select TWRP-RECOVERY-3.1.1-0-x64bit.img
- swipe to install
- and reboot
Convert to f2fs :
Backup all your data off the Internal Storage because it will get wiped!!
- Enter TWRP, choose Wipe > Advanced Wipe
- Make a full wipe except External SD Card
- Check the box for "data" (for data) / Check the box for "cache" (for cache)
- Tap "Change or repair file system"
- Tap "Change file system"
- Tap "F2FS"
- Swipe the button
- Flash Kernel & ROM with F2FS support[/QUOTE]
Device tree:
Lenovo-A6000-TWRP
Credits:
@dev_harsh1998
@bugerxXx
I kanged his thread. :silly:
XDA:DevDB Information
TWRP, Tool/Utility for the Lenovo A6000/Plus
Contributors
Has.007, dev_harsh1998, bugerxXx
Version Information
Status: Beta
Created 2017-07-31
Last Updated 2017-08-29
Screenshots:
Reserved
TWRP Never Dies So Who Knows We May Need Another Post.
That's cool :good: and thanks
Thanks for exclusive thread for TWRP - ARM64.
Thanks to @Has.007 , @dev_Harsh , @bugerxXx & all
Harshad121 said:
That's cool :good: and thanks
Click to expand...
Click to collapse
IbS285 said:
Thanks for exclusive thread for TWRP - ARM64.
Thanks to @Has.007 , @dev_Harsh , @bugerxXx & all
Click to expand...
Click to collapse
Welcome Guys.
Enjoy!
Can I install 32 bit rom with 64 bit twrp.
mr.anonymous12 said:
Can I install 32 bit rom with 64 bit twrp.
Click to expand...
Click to collapse
Oh yes u can
I don't know how thank you boi :'(
I kinda lost track of the forum but i have to ask a couple of questions.Whats a Hex firmware and what are the benefits of switching to arm64?
rifatji said:
I don't know how thank you boi :'(
Click to expand...
Click to collapse
"Account Currently Disabled"
JovanSijacki said:
I kinda lost track of the forum but i have to ask a couple of questions.Whats a Hex firmware and what are the benefits of switching to arm64?
Click to expand...
Click to collapse
Hex-Firmware is a patch to be Flashed cleanly before flashing any roms from now on.
All the details about ARM64 and Hex are already there in my Resurrection Remix Thread Update.
Please Refer Here.
I'm on a cm 13 based rom with twrp 2.8.8.7. can i flash the hex firmware from 2.8.8.7 recovery? And after that can i upgrade my recovery to 3.1.1 by flashing it via 2.8.8.7 recovery?
rohitdey18 said:
I'm on a cm 13 based rom with twrp 2.8.8.7. can i flash the hex firmware from 2.8.8.7 recovery? And after that can i upgrade my recovery to 3.1.1 by flashing it via 2.8.8.7 recovery?
Click to expand...
Click to collapse
Yes you can upgrade recovery via 2.8.8.7
1) click on install and select img file
2) choose recovery partition and flash
3) after that boot into new recovery and flash hex firmware patch
Has.007 said:
- Turn off your phone, combine power + vol (-) to enter fastboot
- type " fastboot device " to check devices
- type " fastboot flash recovery TWRP-3.0.2-Lenovo-A6000x32.img "
- type " fastboot reboot "
Click to expand...
Click to collapse
you forget to edit
it must be
- Turn off your phone, combine power + vol (-) to enter fastboot
- type " fastboot device " to check devices
- type " fastboot flash recovery TWRP-RECOVERY-3.1.1-0-x64bit.img "
- type " fastboot reboot "
how can i check that the arm64 twrp successfully installed or not as i flash it through flashify app and before this i already have installed 32bit twrp.... waiting for someone's reply....
Hey...can I install it on kk twrp 2.8.8
Isfaan said:
Hey...can I install it on kk twrp 2.8.8
Click to expand...
Click to collapse
You can flash this TWRP but you may not be able to flash ROMs, because of the changed things at the root level. It is suggested to flash the lollipop firmware before flashing Nougat ROMs otherwise you'll end up with weird bugs and even bootloops.
mg712702 said:
how can i check that the arm64 twrp successfully installed or not as i flash it through flashify app and before this i already have installed 32bit twrp.... waiting for someone's reply....
Click to expand...
Click to collapse
If you flash with Flashify then most probably it'll be flashed. The better option is to open up your current 32bit recovery and in Install, select Install Image, then select the downloaded recovery and flash. For partition selection choose Recovery.
defy_owner said:
you forget to edit
it must be
- Turn off your phone, combine power + vol (-) to enter fastboot
- type " fastboot device " to check devices
- type " fastboot flash recovery TWRP-RECOVERY-3.1.1-0-x64bit.img "
- type " fastboot reboot "
Click to expand...
Click to collapse
Ahaha yupp I forgot thanks for the correction.
here i present you unofficial TWRP for our beloved newly redmi note 6 pro
download link :-
https://drive.google.com/file/d/12b_h7CoYcShuRVbgRC_npdu1Hz-nf9YR/view?usp=drivesdk
iNSTALLTION
you need your BOOTLOADER UNLOCKED
1. Download the file
2. Extract to your computer desktop or adb folder
View attachment 4651279
3. Reboot your phone to fastboot
4. Go to your computer and connect the phone with computer
5. Open a command prompt and type
6. Fastboot devices if you phone detected in command prompt window it will show numbers of device like in picture
View attachment 4651278
7. now type [ fastboot flash recovery recovery.img] or you can do like this ( fastboot flash recovery and drag recovery file to command prompt) and hit enter
View attachment 4651277
8. now press volume+ and power at the same time until your device boot to TWRP
9. After successfully booted TWRP now flash View attachment Disable_Dm-Verity_ForceEncrypt_09.02.2018.zip and wipe data
10. Enjoy your flashing
Join us on telegram :- https://t.me/tulipofficial
change log
V2018/11/6
* Initial build
V2018/11/23
* Fixed mtp and adb
* Fixed default prop
* Fixed updater script (no more whyred error)
* Added some device tree
V2018/12/2
*minor edits device tree, thanks to https://4pda.ru/pages/go/?u=https://github.com/rezaadi0105&e=79375143
screenshots
[/ATTACH][/ATTACH][/ATTACH][/ATTACH][/ATTACH][/ATTACH][/ATTACH][/ATTACH][/ATTACH]
Thanks for sharing
Great to see development starting for redmi note 6 pro. I have been waiting for this day to come. I think we need a forum now
ahahahah just use twrp from whyred
sayad1 said:
here i present you unofficial TWRP for our beloved newly redmi note 6 pro
download link :-
https://drive.google.com/file/d/1l4rb7JwmfPBr1HdutaMtbWiahE0xqf60/view?usp=drivesdk
iNSTALLTION
you need your BOOTLOADER UNLOCKED
1. Download the file
2. Extract to your computer desktop or anywhere
3. Reboot your phone to fastboot
4. Go to your computer and connect the phone with computer
5. Now run the file called !!! INSTALL.bat and it will do install twrp to your device
Click to expand...
Click to collapse
Thanks!
Thanks!!! Powerfull Redmi Note 6 Pro!!!
Finally TWRP is here! Thanks man :good:
Thanks for sharing.
Thanks.
Has this worked for anyone?
not
How to set the original TWRP? I installed first the pitchblack and then the original one, now whenever I enter it falls into pitchblack and not in the original ...
douglassillva said:
How to set the original TWRP? I installed first the pitchblack and then the original one, now whenever I enter it falls into pitchblack and not in the original ...
Click to expand...
Click to collapse
Extract the recovery.img file from zip and install in PitchBlack recovery as recovery
How to root? Can i use magisk
---------- Post added at 08:36 AM ---------- Previous post was at 08:31 AM ----------
Dr. Ramm said:
ahahahah just use twrp from whyred
Click to expand...
Click to collapse
Mean you use twrp whyred for tulip ?
please officially twrp
When the official twrp will be available??
sayad1 said:
here i present you unofficial TWRP for our beloved newly redmi note 6 pro
download link :-
https://drive.google.com/file/d/1l4rb7JwmfPBr1HdutaMtbWiahE0xqf60/view?usp=drivesdk
iNSTALLTION
you need your BOOTLOADER UNLOCKED
1. Download the file
2. Extract to your computer desktop or anywhere
3. Reboot your phone to fastboot
4. Go to your computer and connect the phone with computer
5. Now run the file called !!! INSTALL.bat and it will do install twrp to your device
Click to expand...
Click to collapse
after install and reboot the Recovery turn back to original not TWRP what do I do, is there any custom way to install twrp?
+1
all actuell TWRP's same ...
with this TWRP there will be no permanent TWRP available,
installed twrp, installed magisk and got root >>> BUT
after reboot you cannot boot to twrp again,
not by holding vol up or by my favorite quick reboot app,
it will always start original MIUI recovery
this unofficial one is useless for me !
phonepete said:
with this TWRP there will be no permanent TWRP available,
installed twrp, installed magisk and got root >>> BUT
after reboot you cannot boot to twrp again,
not by holding vol up or by my favorite quick reboot app,
it will always start original MIUI recovery
this unofficial one is useless for me !
Click to expand...
Click to collapse
you can wipe all for permanent twrp but consider to back up to sd card
douglassillva said:
How to set the original TWRP? I installed first the pitchblack and then the original one, now whenever I enter it falls into pitchblack and not in the original ...
Click to expand...
Click to collapse
Hole thread updated try the new method
Since TWRP is unbootable under this build, you have to use patched boot trick to root this phone.
However, only Magisk 17.1 is usable on this build, Magisk 17.2 - 18.0 can't be installed properly.
So I made a custom update channel that fixed to Magisk 17.1 to assist me.
This guide requires unlocked bootloader - still, I won't introduce how to unlock it here, please Google for it.
Click to expand...
Click to collapse
Here's how to root:
1. Extract the D1C-0-6120-00CN-boot.img from my homebrew firmware written in previous guide, or extract the boot.img from the OTA package.
(Later versions will also provide the patched boot image)
2. Copy this boot.img to Download directory.
3. Install latest Magisk Manager from https://github.com/topjohnwu/Magisk/releases
Remember to allow all the permission after installed.
4. Choose "Left Hamburger Menu" - "Settings" - "Update Channel" - "Custom", and type following URL:
Code:
https://dwz.cn/5I3anBD4
5. Back to Magisk Manager main interface, refresh it and check if latest version changed to 17.1.
Tap "Install" - "Install" - "Patch Boot Image", "Left Hamburger Menu" - "Download" - the boot img you copied.
And wait for the patching procedure complete.
6. Copy patched_boot.img from the Download directory of internal storage to PC.
7. Reboot your phone to fastboot mode and execute following commands:
Code:
.\fastboot reboot-bootloader
.\fastboot boot D:\patched_boot.img
8. Open Magisk Manager, reinstall Magisk 17.1 directly.
9. Reboot your phone and all done.
Is this procedure familiar? Yes, it's the same method used on Nokia 7 Plus. But I wrote this guide to tell you few details that you need to notice.
Hope TWRP can be compiled for D1C-6120.
If you have already unlocked the bootloader then just flash the official TWRP for Nokia 6 and flash the Magisk v17.1 or 17.3 via TWRP normally. And TWRP 3.2.3.0 works well on Android P. I tested it and it works fine.
taicracker said:
If you have already unlocked the bootloader then just flash the official TWRP for Nokia 6 and flash the Magisk v17.1 or 17.3 via TWRP normally. And TWRP 3.2.3.0 works well on Android P. I tested it and it works fine.
Click to expand...
Click to collapse
OK, thanks for the info.
hikari_calyx said:
OK, thanks for the info.
Click to expand...
Click to collapse
I hope you can build TWRP for Android P variant of Chinese and it works on non-unlockbootloader. Like you used to do with Oreo? .Thanks
This did not work with TA-1021 while i have pi installed with twrp and patched boot with magisk 16.1 but it do not work not even root access just keep recovery unchanged(twrp).
It says deviceid locked ple if i patch boot with 17.1 what to do! google pay and banking apps dont work.
hikari_calyx said:
OK, thanks for the info.
Click to expand...
Click to collapse
Can we use official TWRP recovery (3.2.3 made for PLE)
On pie 612H CN - OF YOUR HOMEBREW
and also on 612H ww ??
Please tell
---------- Post added at 06:12 AM ---------- Previous post was at 06:05 AM ----------
taicracker said:
If you have already unlocked the bootloader then just flash the official TWRP for Nokia 6 and flash the Magisk v17.1 or 17.3 via TWRP normally. And TWRP 3.2.3.0 works well on Android P. I tested it and it works fine.
Click to expand...
Click to collapse
Can we install this TWRP recovery on Chinese firmware (or ww firmware of ta-1003)or it can be flashed only on PLE versions
hikari_calyx said:
OK, thanks for the info.
Click to expand...
Click to collapse
Can I install D1C-612H-WW over 612H-CN using OST ??
OST show that the image is broken
hikari_calyx said:
Here's how to root:
1. Extract the D1C-0-6120-00CN-boot.img from my homebrew firmware written in previous guide, or extract the boot.img from the OTA package.
(Later versions will also provide the patched boot image)
2. Copy this boot.img to Download directory.
3. Install latest Magisk Manager from https://github.com/topjohnwu/Magisk/releases
Remember to allow all the permission after installed.
4. Choose "Left Hamburger Menu" - "Settings" - "Update Channel" - "Custom", and type following URL:
Code:
https://dwz.cn/5I3anBD4
5. Back to Magisk Manager main interface, refresh it and check if latest version changed to 17.1.
Tap "Install" - "Install" - "Patch Boot Image", "Left Hamburger Menu" - "Download" - the boot img you copied.
And wait for the patching procedure complete.
6. Copy patched_boot.img from the Download directory of internal storage to PC.
7. Reboot your phone to fastboot mode and execute following commands:
Code:
.\fastboot reboot-bootloader
.\fastboot boot D:\patched_boot.img
8. Open Magisk Manager, reinstall Magisk 17.1 directly.
9. Reboot your phone and all done.
Is this procedure familiar? Yes, it's the same method used on Nokia 7 Plus. But I wrote this guide to tell you few details that you need to notice.
Hope TWRP can be compiled for D1C-6120.
Click to expand...
Click to collapse
On rebooting Android root gone????
dont work for me
edit: worsk now over ND1-612C-0-00WW , but for firm official for n5 (612h-0-00WW ) not works, ist patched the xploit for magisk 17 and up
hikari_calyx said:
Here's how to root:
1. Extract the D1C-0-6120-00CN-boot.img from my homebrew firmware.
9. Reboot your phone and all done.
Is this procedure familiar? Yes, it's the same method used on Nokia 7 Plus. But I wrote this guide to tell you few details that you need to notice.
Hope TWRP can be compiled for D1C-6120.
Click to expand...
Click to collapse
Please help I have working 1003 ww pi installed on Ta-1021 and initially rooted using Chinese twrp with magisk later I tried to install update of twrp recovery got crashed and could not enter recovery tried to flash with Qualcomm tools can enter into Edl phone detected but frimware files doesn't flash some errors. Now result is I can operate my phone magisk 16.1 installed but useless. Banking apps don't work. Factory reset don't work. *#*#874#*#* says file not found (may be because I don't have recovery). Ost la as usual don't work. Please help!
Please help me i am on oreo version .. and i have flashed twrp recovery on my nokia 6 (TA - 1021) ..
THE Problem is when i reboot to recovery it's not booting in twrp but it's booting on custome recovery ..
I need pc everytime , if i want to boot it on twrp .
I have to run command every time to boot in on twrp recovery ..
Is there any way to directly boot it on twrp recovery not in custom recovery ? Please help me
@hikari_calyx Does fastboot boot work for you on pie? For me, it does not. Almost shat my pants thinking my TWRP doesn't work but it does in fact work, just fastboot booting it does not work.
Finally got the official pie update on my TA-1033. (unlocked bootloader)
The standard versions of TWRP 3.2.3.0 / Magisk 17.3 / Magisk Manager 6.0.1 worked perfectly.
As above, "fastboot boot" doesn't work, but "fastboot flash" etc. does.
Happy days.
Not working for me please can you tell the procedure step by step as i tried your steps but didn't happen anything please
---------- Post added at 06:29 PM ---------- Previous post was at 06:26 PM ----------
taicracker said:
If you have already unlocked the bootloader then just flash the official TWRP for Nokia 6 and flash the Magisk v17.1 or 17.3 via TWRP normally. And TWRP 3.2.3.0 works well on Android P. I tested it and it works fine.
Click to expand...
Click to collapse
Not working i have unlocked bootloader but i tried to flash twrp and it's not booting on it any other solution please let me know .
Can you help me please my device is showing me this on my recovery , what's an issue please reply as soon as possible i can't even apply update through sd card or adb it's not detecting everytime it entered to this menu .. please help me
hikari_calyx said:
Here's how to root:
1. Extract the D1C-0-6120-00CN-boot.img from my homebrew firmware written in previous guide, or extract the boot.img from the OTA package.
(Later versions will also provide the patched boot image)
2. Copy this boot.img to Download directory.
3. Install latest Magisk Manager from https://github.com/topjohnwu/Magisk/releases
Remember to allow all the permission after installed.
4. Choose "Left Hamburger Menu" - "Settings" - "Update Channel" - "Custom", and type following URL:
Code:
https://dwz.cn/5I3anBD4
5. Back to Magisk Manager main interface, refresh it and check if latest version changed to 17.1.
Tap "Install" - "Install" - "Patch Boot Image", "Left Hamburger Menu" - "Download" - the boot img you copied.
And wait for the patching procedure complete.
6. Copy patched_boot.img from the Download directory of internal storage to PC.
7. Reboot your phone to fastboot mode and execute following commands:
Code:
.\fastboot reboot-bootloader
.\fastboot boot D:\patched_boot.img
8. Open Magisk Manager, reinstall Magisk 17.1 directly.
9. Reboot your phone and all done.
Is this procedure familiar? Yes, it's the same method used on Nokia 7 Plus. But I wrote this guide to tell you few details that you need to notice.
Hope TWRP can be compiled for D1C-6120.
Click to expand...
Click to collapse
You gave wrong code for booting patched boot.img
It should be as
FASTBOOT FLASH BOOT PATCED_BOOT.IMG
It will permanently root the android pie
You gave the FASTBOOT code only for booting
vineet09i said:
Here's how to root:
1. Extract the D1C-0-6120-00CN-boot.img from my homebrew firmware written in previous guide, or extract the boot.img from the OTA package.
(Later versions will also provide the patched boot image)
2. Copy this boot.img to Download directory.
3. Install latest Magisk Manager from https://github.com/topjohnwu/Magisk/releases
Remember to allow all the permission after installed.
4. Choose "Left Hamburger Menu" - "Settings" - "Update Channel" - "Custom", and type following URL:
5. Back to Magisk Manager main interface, refresh it and check if latest version changed to 17.1.
Tap "Install" - "Install" - "Patch Boot Image", "Left Hamburger Menu" - "Download" - the boot img you copied.
And wait for the patching procedure complete.
6. Copy patched_boot.img from the Download directory of internal storage to PC.
7. Reboot your phone to fastboot mode and execute following commands:
You gave wrong code for booting patched boot.img
It should be as
FASTBOOT FLASH BOOT PATCED_BOOT.IMG
It will permanently root the android pie
You gave the FASTBOOT code only for booting
Click to expand...
Click to collapse
Hey can i use patched boot image on my official update of pie or which version is able to use of magisk?
Emmykay223 said:
Hey can i use patched boot image on my official update of pie or which version is able to use of magisk?
Click to expand...
Click to collapse
You can use the same procedure as hilarious calyx have said in the post
But the FASTBOOT command should be as
FASTBOOT flash boot patched_boot.img
It will permanently root your android
Magisk 17.1 is working
Or you can also flash official twrp available at twrp website and from there you can directly flash magisk 17.1 zip
vineet09i said:
You can use the same procedure as hilarious calyx have said in the post
But the FASTBOOT command should be as
FASTBOOT flash boot patched_boot.img
It will permanently root your android
Magisk 17.1 is working
Or you can also flash official twrp available at twrp website and from there you can directly flash magisk 17.1 zip
Click to expand...
Click to collapse
Yes but twrp is not booting on my pie build because it is showing "failed to find device for partition system" and i am unable to apply update through sd card or through adb i don't know why so i am thinking to follow this steps hope it will work.
vineet09i said:
You can use the same procedure as hilarious calyx have said in the post
But the FASTBOOT command should be as
FASTBOOT flash boot patched_boot.img
It will permanently root your android
Magisk 17.1 is working
Or you can also flash official twrp available at twrp website and from there you can directly flash magisk 17.1 zip
Click to expand...
Click to collapse
Why any module is not installing by magisk it's showing me unable to extract, i followed each and every steps as mentioned above and rooted my Nokia 6 again but it's not installing any module what's the reason behind it?
This guide is specifically aimed for Z010DD users who want to flash custom ROMs:If you want to stay on stock and only wanna flash TWRP and root the Stock ROM, please skip this thread and refer to @jide1 's guide here instead: https://forum.xda-developers.com/as...ot-asus-zenfone-max-zc550kl-qualcomm-t3652518
Things to be noted beforehand:
1. Make sure you are on the latest/final stock rom/firmware
2. Need Unlocked bootloader (Linked below, install the apk and follow the steps)
3. Take backup of all of your data from the internal storage. (To avoid depression if accidentally wiped your precious data)
4. Minimal ADB and Fastboot (Thread Linked below, Download from there and follow on-screen steps).
Steps:
A. To flash TWRP:
1. Once you have unlocked the bootloader, download 'minimal adb and fastboot zip' and PBRP zip(extract img from it).
2. Boot into fastboot by switching off the device, then POWER + VOLUME 'UP'. (You'll enter CSC ode screen, which is fastboot so don't worry)
3. Place the recovery image into the fastboot folder and open a command window there.
4. Connect your device, then type 'fastboot devices' and Enter, just to verify if your device is shown.
5. type: fastboot flash recovery recoveryname.img
THE NEXT STEP IS IMPORTANT, Pay Attention.
6. Now REBOOT Directly to twrp by holding POWER + VOLUME 'DOWN'. Don't boot into system else stock recovery will get restored.
B. Preparing for Flashing ROMs:
Once you have booted to twrp successfully, you will need to 'format' all the partitions, which includes:
System, Data, Cache, Dalvik/ART Cache, & Internal Storage.
HERE YOU WILL LOSE ALL OF YOUR DATA, YOU HAVE BEEN WARNED ALREADY SO, yeah.
Click to expand...
Click to collapse
1. In TWRP, go to WIPE -> ADVANCED WIPE;
2. Select the above listed partitions and then SWIPE TO WIPE.
Note: You will notice a partition called 'ASDF' ,wipe/skip, doesn't matter.
3. Come back to home, go to REBOOT -> RECOVERY
C. Flashing ROMs:
1. Download the ROM, Patch, and Kernel zip (Linked Below).
2. Flash them in the mentioned order.
3. Flash Opengapps (if needed) (Nano Gapps recomended).
4. Reboot.
(NOTE: FOR MAGISK, FLASH IT 'AFTER FIRST BOOT ONLY', AND IF FLASHING ZIP NOT WORKING, THEN see POST #3)
Bugs and Notes:
1. Notification LED doesn't BLINK when a notification arrives, it stays on (colors are correct though).
2. VoLTE is broken on pie roms (ignore the volte logo), stick to Oreo if you want VoLTE. (LTE data works fine).
3. Reboot Sometimes get stuck in black screen, its RANDOM, LONG Press the power button for 15 secs instead if that happens.
4. If any ROM contains 'Always On' functionality, disable it as the feature doesn't work properly. (Ambient display has no issues)
Links: Refer POST #2 .
Credits:
@SakilMondal for roms.
@YaAlex for kernel and patch for Z010DD.
Myself for testing.
Created 2019-04-22
Last Updated 2019-05-20
Links:
ROMs: https://sourceforge.net/projects/zenfone-max-updates/files/Z010D/ (Please flash the latest ones only, don't use old ones)
Patch (link updated): https://anonymousfiles.io/3WLplRtD/
Kernel (link updated + new kernel update): https://anonymousfiles.io/m4oKP6wL/
TWRP Recovery (Image file, Flash via fastboot): https://drive.google.com/file/d/1txHT0vRNo0gTMkD0Sb5kpuQQT0dAiphH/view
ASUS Official Bootloader Unlock Tool for 8939 Devices: http://dlcdnet.asus.com/pub/ASUS/Ze...513.74708998.1502054577-2083321676.1502054577
Minimal ADB and Fastboot: https://forum.xda-developers.com/showthread.php?t=2317790
Troubleshooting:
Instructions for Magisk:
1. Extract boot image from the rom zip
2. Go to Magisk Manager app
3. Tap 'Install' next to 'Magisk is not installed' line.
4. Tap 'Select and patch a file'
5. Navigate to the extracted boot image. It will now create a new boot image and save it in mentioned location.
6. Reboot to recovery, Flash the Boot image + KERNEL zip.
7. Reboot to system.
To fix CTS Mismatch in Magisk:
Open /system/build.prop, replace the line 'ro.build.fingerprint=' with:
Code:
ro.build.fingerprint=asus/WW_Phone/ASUS_Z010_2:6.0.1/MMB29P/13.8.26.80-20161230:user/release-keys
Open /system/vendor/build.prop , replace the line 'ro.vendor.build.fingerprint=' with:
Code:
ro.vendor.build.fingerprint=asus/WW_Phone/ASUS_Z010_2:6.0.1/MMB29P/13.8.26.80-20161230:user/release-keys
Patch is required for sd410 devices??
koushik99 said:
Patch is required for sd410 devices??
Click to expand...
Click to collapse
Nope, patch is only for DD.
Guide has been updated. Please check.
unable to flash GAPPS
Hai , i got a problem , phone shutdowns after flashing GAPPS (opengapps) , i tried Many RAMS(DOT OS, lineage-16.0-20190514-Z010D, BootleggersROM-Pie4Z010D.4.1-Stable-Unshishufied-20190421-170442 ,RR-P-v7.0.2-20190505-Z010D-Unofficial ) , without GAPPS Flashing it is , ROM working good , please let us know how to fl
I cant turn off the phone with pie,
i need to go in recovery first to power off otherwise after a while it turns back on
is it a known bug?
PRASAD.ASRS said:
Hai , i got a problem , phone shutdowns after flashing GAPPS (opengapps) , i tried Many RAMS(DOT OS, lineage-16.0-20190514-Z010D, BootleggersROM-Pie4Z010D.4.1-Stable-Unshishufied-20190421-170442 ,RR-P-v7.0.2-20190505-Z010D-Unofficial ) , without GAPPS Flashing it is , ROM working good , please let us know how to fl
Click to expand...
Click to collapse
Looks like you're using aroma gapps..
Use micro gapps or below. Here everything works fine.
ihatebarrels said:
I cant turn off the phone with pie,
i need to go in recovery first to power off otherwise after a while it turns back on
is it a known bug?
Click to expand...
Click to collapse
In both oreo and pie, for both z010d and dd, reboot and shutdown is an issue
It doesn't happen everytime, its random, and no fix is found yet.
Is it working on asus zenfone max 2016 sd 615?
Can anyone give me the updated link for the dd-fix-r5.zip and GUNMetal-R3.zip files
james_imch said:
Can anyone give me the updated link for the dd-fix-r5.zip and GUNMetal-R3.zip files
Click to expand...
Click to collapse
I just saw that the link was no longer working (would have been better if you pointed out that first instead)
Anyways,
Link is updated, check again (kernel is updated,patch remains the same).
Kaustav365 said:
Is it working on asus zenfone max 2016 sd 615?
Click to expand...
Click to collapse
Hope you have read the OP properly
This thread is only for sd615/Z010DD/MSM8939, and its clearly mentioned.
TechNova said:
I just saw that the link was no longer working (would have been better if you pointed out that first instead)
Anyways,
Link is updated, check again (kernel is updated,patch remains the same).
Click to expand...
Click to collapse
PBRP Recovery (flashable zip) link is also not working. Please update it.
james_imch said:
PBRP Recovery (flashable zip) link is also not working. Please update it.
Click to expand...
Click to collapse
Done,
Removed pbrp and now Twrp link posted.
TechNova said:
Looks like you're using aroma gapps..
Use micro gapps or below. Here everything works fine.
Click to expand...
Click to collapse
Hey! I am also facing the same issue. I tried the nano version of Gapps on my Asus Zenfone Max Z010D and my phone is still crashing it keeps restarting and then automatically turns off. Is there any issue to fix this?
unable to flash roms it shows up no digest found or invalid zip or update error 7
please help how do i find correct rom for sd615 8939
Eric0000 said:
unable to flash roms it shows up no digest found or invalid zip or update error 7
please help how do i find correct rom for sd615 8939
Click to expand...
Click to collapse
I too facing same problem
Unlocking the apk no longer works
Home
Twrp recovery for Tecno kg8
NOTE:
This Recovery is Built from sources. It's Not a Port. It is Tested and working fine.
INSTALLATION:
1. Download Auto TWRP installer zip from below and unzip the file.
2. COPY THE STOCK boot.img in your internal storage or external storage.
3.0 Connect Mobile Withe Pc using Data Cable.
3. Unzip folder open and flash.bat click
4.cmd topup open and type y enter.
5.twrp flash and boot into TWRP
6.Install option -> stock boot.img flash and back.
7.Advance option->flash current twrp and back.
8.Reboot options -> recovery click wait reboot recovery
9.wipe option ->format data->yes typing then enter and back
10.Reboot options -> recovery click wait reboot recovery
11.Install options ->sdcard to Magisk.zip flash .
12.reboot-system
13.phone on
14.Magisk app opens and update
15.success Twrp and root
DOWNLOADS:
TWRP
Stock Boot Img Link :
1. V622
2. V713
3. V722
SOURCES:
TWRP
Device tree
WORKING
Flashing magisk
Back up and restore ( back up your Imei )
Back UP System Vndor and rename img to flash work
Android 11-13 Twrp work
Mtp work
Otg work
Twrp booted
virtual A/b
Bug
Touch some time not work ( use OTG mouse )
Decryption
data Unable mount (Format data - yes to work)
Fastbootd not work
HIT THANKS BUTTON IF ABOVE INFORMATION IS HELPFUL TO YOU
Twrp build By Parvej
Pls make a video how to install twrp on techno spark 8 pro pls
Parvej789 said:
Twrp recovery for Tecno kg8
NOTE:
This Recovery is Built from sources. It's Not a Port. It is Tested and working fine.
INSTALLATION:
1. Download Recovery.zip from below. Copy to adb folder.
2. COPY THE STOCK boot.img in your internal storage or external.
commands.
2. adb reboot bootloader
3. fastboot flash vbmeta vbmeta.img
4. fastboot flash boot twrp.img
5. fastboot reboot recovery. wait twrp boot now. twrp open.
6. Install option -> stock boot.img flash.
6. Advance option->flash current twrp
7.Reboot options -> recovery click wait reboot recovery
8. wipe option ->format data->yes typing then enter and back
9. Reboot options -> recovery click wait reboot recovery
10. Install options ->sdcard to Magisk.zip flash(magisk 25.apk rename apk to zip)
11.reboot-system
12. phone on
13. success Twrp and root
DOWNLOADS:
TWRP
SOURCES:
TWRP
Device tree
Click to expand...
Click to collapse
Showing twrp not install
{Mod edit: Quotation fixed - Oswald Boelcke}
Anik111 said:
Pls make a video how to install twrp on techno spark 8 pro pls
Showing twrp not install
{Mod edit: Quotation fixed - Oswald Boelcke}
Click to expand...
Click to collapse
Wait some time bro.
pls make a video full method as very soon
Anik111 said:
pls make a video full method as very soon
Click to expand...
Click to collapse
Ok bro
Its working in tecno spark 8 pro kg8-Gl builder number is/KG8-H698CDEFGH-R-GL-220620V722/ it will work or not