Hello.
I've created a app to mitigate the new krack vulnerability and other MITM attacks like evil twin, etc.
This is just a mitigation tool, if you can get a update in your phone do it.
The app requeriments are:
1 - A fixed ip on your phone (Or a static dhcp lease).
2 - A fixed wifi channel.
3 - A local check URL, on your router If you use OpenWRT/LEDE/DD-WRT or anything where you can write to the web root, is just a
html accessible via a local URL with a long and random text.
If not you can use your router local admin web site (usually 192.168.1.1) or anything on your local network that
generates a static text.
4 - Android 4.0+ (I don't test with lower versions , but you can edit the source code.. )
The app will check your SSID, BSSID, Your Local IP, The Network Mask, The Gateway, The DNS Servers, The Wifi Channel Frequency (Only on android 5.0+), And The Text On The Check URL.
if any of that is not equal to the saved profiles it will turn your wifi off and give you a notification.
The app will do checks everytime a network status change is done, when you turn on your screen,
when you connect disconnect your charger and every 60 seconds is the service is alive.
Here's is the apk and the source code.
(Sorry I'M NOT SPAMMING, but i consider the tool is useful and just registered for this,
but i have long time following this forum, please don't be angry )
(Google Drive) ... open?id=0B_CL_paUhmttWmplU2J1V1Rnc0k APK
(Google Drive) ... open?id=0B_CL_paUhmttVEZ5Vm9mSjJXMkU Source Code (Reuploaded)
Thanks for the upload.
Considered the time you've created an app and the time came the vulnerability report, I'll say great job!
Edit: the source zip is broken?
q695359 said:
Thanks for the upload.
Considered the time you've created an app and the time came the vulnerability report, I'll say great job!
Edit: the source zip is broken?
Click to expand...
Click to collapse
thanks
about the zip , Really? , i can view it with no problem in google drive, and i downloaded it and it's ok
anyway i've packaged the source again in tar.gz and uploaded it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
kamiloxnumetal said:
thanks
about the zip , Really? , i can view it with no problem in google drive, and i downloaded it and it's ok
anyway i've packaged the source again in tar.gz and uploaded it
Click to expand...
Click to collapse
tar.gz is working. Thanks! Now it's time to uncover what you pro dev do.
Edit: found out why the zip looks like it broke. My zip extractor was broken. It couldn't recognize the compression. my bad.
Related
Everything Search is a lightweight program that allows you to locate files and folders instantly , as you type.This is a must have tool for everyone.Bind it with a hotkey (Eg: Win+S).You can search anything almost instantly on Windows.
http://www.voidtools.com/download.php (download free < 500kb)
Preview on Windows
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This short & simple tutorial will allow anyone to remotely/locally search files on your home pc/local network/laptop in less than a second.Tried & tested this method on edge/wifi.
Step 1: (Ctrl+P) Goto Tools -> Options -> HTTP Tab
Fill in the desired port or leave as is.
Fill in the user name and password for authentication
Note : I have an android phone , so for me downloading only worked when the authentication was removed during configuration.
You can remove this authentication if download fails.
Step 2: Start the HTTP Server.
Step 3: Url Formation - http://[yourip]:[port]
If you are accessing your files remotely. You can find your global ip using http://whatismyip.com
Eg: Remote Url http://123.231.31.192:8080
If you are accessing files locally through wifi , find out your host pc's ip address
Eg: Local Url http://192.168.2.1:8080
Open the url in your mobile browser and search your entire pc/laptop
You can see search takes less than a second.Download speed as per your network.
This is just a straightforward method , so it should work on any mobile/tablet with a basic browser.I am not affiliated with the software in anyway.Hope this tutorial was helpful to you.
Update: It did'nt work for me on Opera Mini. For every other browser works fine.
Would highly appreciate a feedback.
Press 'Thanks' if this post was useful in anyway.
Well written and laid out. I'll give this a go. Thanks!
Good post.. Cheers
Description
n2n for android.
n2n is a peer to peer VPN daemon.
app:
search 'n2n' at google play store
Root access is highly recommended for correct n2n daemon usage
Get secure anytime, anywhere access to your computers from your Android device.
Access your files, data and applications and get stuff done:
• Access your home and work computers on the go
• Control your PC as if you’re sitting right in front of it
• Get to your computer files and edit then from your Android device
• Remotely run any application on your computer from your Android device
zhoubug said:
Description
n2n v2 for android.
n2n is a peer to peer VPN daemon.
app:
search 'n2n' at google play store
Root access is highly recommended for correct n2n daemon usage
Get secure anytime, anywhere access to your computers from your Android device.
Access your files, data and applications and get stuff done:
• Access your home and work computers on the go
• Control your PC as if you’re sitting right in front of it
• Get to your computer files and edit then from your Android device
• Remotely run any application on your computer from your Android device
Click to expand...
Click to collapse
Thanks. Will take a look.
Ps. Was the incorrect spelling of Warning intentional?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-N7105 using Tapatalk
jdstrydom said:
Thanks. Will take a look.
Ps. Was the incorrect spelling of Warning intentional?
Sent from my GT-N7105 using Tapatalk
Click to expand...
Click to collapse
thks. i will update the Warning in next version. just quit the smb explore,not exit the program.
long tap the "default" profile ,you can add or edit your smb profile.
zhoubug said:
thks. i will update the Warning in next version. just quit the smb explore,not exit the program.
long tap the "default" profile ,you can add or edit your smb profile.
Click to expand...
Click to collapse
Lol. Thanks, got that worked out. Was exploring the app when I noticed ; not grammar police. ?
Sent from my GT-N7105 using Tapatalk
New versino n2n v1 support now
New version released.
[1.1.2]
n2n v1 support
Increase max password length
Whenever I try to format to factory settings it says 'No PDP scenario exists!'. I'm not sure if it's normal or if there's even anything wrong with it. I was hoping somebody here could look at these logs:
Under the hood copied - Pastebin.com
Pastebin.com is the number one paste tool since 2002. Pastebin is a website where you can store text online for a set period of time.
pastebin.com
Thanks.
maybe this
Samsung account
us.community.samsung.com
raul6 said:
maybe this
Samsung account
us.community.samsung.com
Click to expand...
Click to collapse
I've read that thread a few times, there doesn't seem to be much of a solution. However, this post resembles my issues:
I have the same issue & have taken it to Samsung to do the oem flashing twice! Since I first powered the phone up my root folder files were timestamps "Dec 31 2008"!? & other priv app files "1st Jan 1970" this even persists across a re-flash & or factory reset! My local Samsung shop said they haven't got the expertise to offer a solution!... 3 mobile haven't returned my calls for help either! I believe I've managed to figure it out through a huge amount of research & in my case its due to a TROJAN RAT that uses the Bluetooth vulnerabilities to access & gain complete control of the phone & in my case during the initial startup sequence! Its a variety of the Trojan Agent banbra/aka "Black Moon"... it sets up SSH remote access control & it adapts very quickly to any security changes or updates, it has cloud support & i can only copy it out to shared storage to have it detected & removed as Ransomware (by Malwarebytes) but unfortunately the parent files are unaffected. It also encrypts selected files. It can even inject code & is a master manipulator of Web pages with XSS vulnerabilities & it very very infectious. Since this phone was delivered to me I've lost control of all my pc's, laptops,even Linux & my iPhones via Bluetooth or by hijacking the router. Any help would be very much appreciated!!
Due to my router and other systems being affected, running ADB is useless.
I'll pay someone to find a solution, the logs I posted can explain the issue far better than I can. Thanks again.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi!
The APP Servers Ultimate Pro is runs perfectly on a Samsung smartphone with Android 6. (alternative free version = Servers Ultimate )
Many servers are integrated there. You may have to install extensions. I have already got some servers up and running.
Actually not a bad thing.
Now I want to try whether a VPN server is possible with it! If so, it would be very cool! I need help with the setting!
1.) The server app also needs a "server.conf" or "server.ovpn" = in which directory does it have to be for the app?
2.) I need help with the correct structure of the Conf and how exactly to address the certificates.
3.) How many ports do I have to activate in the router and can I freely choose them?
Was unnecessary!
PLZ close / delet thread
I've been struggling with some of the configurations. I have the web server up and running with Wordpress. FTP works, IRC runs but I can't seem to get myself admin (OP) status. Email, I can't get it to connect, even with the extended ports above 1024. GIT server works, that's where I'm storing the source for my web site, the using FTP to place it in the www directory for the web server. I'm using the DNS on my HAMMESH network to point everything to the Android TV box that the Server apps are running on.
My goal is to have an Android TV box, that I can plug in to an ARDEN Network to provide a Website, local email, chat, storage sharing for disaster photos. Email is the only thing I can't get around. I also have a Le Potato Arm64 board that has Ubuntu 18.04 LTS, running ISP Config. That is my plan B. I may be better off with this route since it supports a 256GB MicroSSD card. I found an X88 TV box on Amazon that has 4GB and 32GB for $40 US, that may be plan C is I can get the email sorted out. I've tested the connection with Telnet ip_address>2525 and getting the connection refused. If I use the tools inside Servers Ultimate Pro, it talks to the email server, If I issue the EHLO command, it responds. So it appears the email server app may not actually be opening the 2525 port like it's configured to. I may try the proxy server, to see it that can route the traffic to the backplane on port 25
I'm testing against my M88 TV box and I can now test the email
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MOD ACTION:
Thread closed at the request of the OP. Also this thread is in the wrong forum.
@r0gu3pr13st
If necessary, please post a new thread in an appropriate forum.
i make simple and small android app that you can Wifi Connect to your phone SD memory via Lptop or computer or Phone and see, delete send or receive files from or to phone.
for Exchange files between phone and computer or other phone, 2 device (sender and receiver) must connect to Same Wifi network or phone that installed this App must set Hot Spot and other device Connect it.
no internet connection need.
app size: 720 kb
Default ip and Port is:http://192.168.43.1:1234 (port 1234) you can change from setting
After 2 Device Connect Together from Same network,Receiver must Enter this ip and Port on Internet Browser(FireFox is Better) to see and manage Files on phone memory and SD card.
on Test i Send 10 Gig Files fast Without error
you can set Password from setting that connecting device must enter password
you can active Encoding Data via setting for better Security
after Tap to app Service Start , you can exit from app and app Working in Background
app setting Language is Farsi, But i edit and Translate Setting Screenshot to English and send hare to easy use it
App is FREE But i Happy anyone Donate me with BitCoin or Ethereum
my Bitcoin Wallet:
1741ZeAWPjHGKZkUiSok14MZCW9fAUBUUm
my Ethereum wallet:
0x0f5f7df87bf25b70b4d164f58721cf364a1563c7
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Fake?
Original version:
WiFi File Transfer ProAndroid 4.4 - 2013
gidano said:
Fake?
Original version:
WiFi File Transfer ProAndroid 4.4 - 2013
Click to expand...
Click to collapse
hi, this app not Fake and improve and better from "Wifi File Transfer Pro" also you can send and Transfer Big File Size with my App But "Wifi File Transfer Pro" is Limited File Size to Transfer !!
Anyhow some menu and Theme is Similar
Nice,you should really work on that UI,make it look modern.
i also would like a better looking UI