Zoji Z6 Compatibility - Framaroot

Does anyone know compatibility of FRAMAROOT on -Homtom- Zoji Z6 (MTK6580 with ARM-CortexA7 on Android 6.0)
https://www.devicespecifications.com/en/model/40dd4219
Tones of similar configurations exist on Chinese branch , I don't want to brick my device as I did otherone before -not with Framaroot- , so I want to be sure about safety of using Framaroot on it.
Btw this thread is the VERY FIRST THREAD on Zoji Brand on XDA also Zoji Z6:cyclops:
All help and experience will be appreciated.

As far as I know, there's no working root solution for Zoji Z6.

Hi there. Finally I made a virus-free and rooted Zoji Z6 revision M29 firmware. It works fine. But still can't on Y8321 revision... Anyone help?

hello I have homtom zoji z6 and I have problem to install amazon flex app

Z6 virus free firmware
KinstZ said:
Hi there. Finally I made a virus-free and rooted Zoji Z6 revision M29 firmware. It works fine. But still can't on Y8321 revision... Anyone help?
Click to expand...
Click to collapse
Hello KinstZ,
could you please share your virus free (rooted) ROM?
Would be very helpful
Cheers, WGecko

Wittygecko said:
Hello KinstZ,
could you please share your virus free (rooted) ROM?
Would be very helpful
Cheers, WGecko
Click to expand...
Click to collapse
Actually, time is running and now I have both - M29 and Y8321 firmware without viruses. Both were rooted but I've remove root in Y8321 as I actually do not need it on that HomTom ****.
There are two reasons why I'm not publishing it.
1. I made it from working firmware of my device, not with clean install but with all my data. Of course, as it is firmware and not dump, any sensitive information is missing. But it was installed about 40+ times here in Russia (I've published it for a while) and each tome somebody start it after flashing, my own device is kicked off from google account! It is really annoying, especially considering that fact, that only 2 form that 40+ said "thank you, Kinst!".
2. Publishing it, I'm helping HomTom to sell its ****. Would it be some improvements or bug fixes - it would be a pleasure. But original Zoji Z6 is a piece of crap, and HomTom did it not by the mistake... I do not want to help that scammers to earn money. Lot's everybody knows that HomTom == ****.

rooting options for Z6?
KinstZ said:
Actually, time is running and now I have both - M29 and Y8321 firmware without viruses. Both were rooted but I've remove root in Y8321 as I actually do not need it on that HomTom ****.
There are two reasons why I'm not publishing it.
1. I made it from working firmware of my device, not with clean install but with all my data. Of course, as it is firmware and not dump, any sensitive information is missing. But it was installed about 40+ times here in Russia (I've published it for a while) and each tome somebody start it after flashing, my own device is kicked off from google account! It is really annoying, especially considering that fact, that only 2 form that 40+ said "thank you, Kinst!".
2. Publishing it, I'm helping HomTom to sell its ****. Would it be some improvements or bug fixes - it would be a pleasure. But original Zoji Z6 is a piece of crap, and HomTom did it not by the mistake... I do not want to help that scammers to earn money. Lot's everybody knows that HomTom == ****.
Click to expand...
Click to collapse
really hate this phone , how did u get it rooted.

Hi, anybody on the Zoji_Z6_MT6580_20180125_6.0 firmware ?
I have just updated to that one and lost sound. Also SIM card doesn't get read any longer apparently. :|

Unblock a s7edge?

KinstZ said:
Actually, time is running and now I have both - M29 and Y8321 firmware without viruses. Both were rooted but I've remove root in Y8321 as I actually do not need it on that HomTom ****.
There are two reasons why I'm not publishing it.
1. I made it from working firmware of my device, not with clean install but with all my data. Of course, as it is firmware and not dump, any sensitive information is missing. But it was installed about 40+ times here in Russia (I've published it for a while) and each tome somebody start it after flashing, my own device is kicked off from google account! It is really annoying, especially considering that fact, that only 2 form that 40+ said "thank you, Kinst!".
2. Publishing it, I'm helping HomTom to sell its ****. Would it be some improvements or bug fixes - it would be a pleasure. But original Zoji Z6 is a piece of crap, and HomTom did it not by the mistake... I do not want to help that scammers to earn money. Lot's everybody knows that HomTom == ****.
Click to expand...
Click to collapse
Even if you don't post the entire ROM, you still can guide others how and what to remove to get if free from viruses and malware. And helping others to remove malware isn't the same as helping HomTom, on the contrary you will help other not to let HomTom steal their personal information.

It seems that Resurrection Remix is available for Zoji Z6. I'm about to install it now. It *should* be virus free (depending on where they have put the malicious code). You might have to edit updater-script depending on TWRP version (newer fails with error 11). If so, edit line 40 & 41 and remove ../11120000.msdc0/.. in the path.

Sent from my SM-G532M using XDA Labs

Hi

Related

[Q] need ROOT exploit for latest non SAMSUNG EXYNOS 5410 device

I am about to buy a high specs EXYNOS 5410 Octa core pad need to know if there are any available ROOT exploit for this device which is non SAMSUNG brand. A google search keeps cropping up with SAMSUNG rooting exploits for Exynos 5410 (there is a life after SAMSUNG you know)
My best bet will be for Chainfire EXYNOS ABUSE type of exploits, so Chainfire are you up to it? It should be easier for you.
The product is a TEAM GEE TG-8001 8inch Pad with #g build in/GPS.WIFI and whole shizz bang.
It can be browsed here : http://www.geekbuying.com/item/Team...PS-Touch-Screen-1280-800-2GB-16GB-319522.html
I badly want to root this the minute I get my hands on it.
forget it
I buy It and... it's crap, why? Random freezing times, bad speaker sound...no gapps, no root, and ...no sim service.
That Bad huh!
joecd said:
I buy It and... it's crap, why? Random freezing times, bad speaker sound...no gapps, no root, and ...no sim service.
Click to expand...
Click to collapse
Might as well stay away from that kinda of crap. No gapps? means no google playstore. Overly priced, I can buy the same stuff on China market for about USD125 and they are selling it here in US for over USD300?
I got a root right by Kingo Android Root.
Installing GApps:
- Install RootExplorer;
- Download gapps-jb-20130812-signed.zip (!);
- Unpacked in the internal memory folder ONLY gapps-jb-20130812-signed\system\app\ (!);
- After RootExplorer transferred all the system folder (for example "system/app/Gmail.apk");
- Changed permissions to rw-r--r-- (!);
- Turned off, turned on, there was a update application.
Profit!
Thanks a lot but what about the freezes and other problems?
BanKhv said:
I got a root right by Kingo Android Root.
Installing GApps:
- Install RootExplorer;
- Download gapps-jb-20130812-signed.zip (!);
- Unpacked in the internal memory folder ONLY gapps-jb-20130812-signed\system\app\ (!);
- After RootExplorer transferred all the system folder (for example "system/app/Gmail.apk");
- Changed permissions to rw-r--r-- (!);
- Turned off, turned on, there was a update application.
Profit!
Click to expand...
Click to collapse
What about the others anomalies freezes,and other problems? What do you experience by the way I can get it for about USD 125 only in Asia.
Geekbuying is sucking the blood out of its customers.
Now a few changes...
looks that somebody is working hard...new update, but freezes continue.
cracktech said:
What about the others anomalies freezes,and other problems? What do you experience by the way I can get it for about USD 125 only in Asia.
Geekbuying is sucking the blood out of its customers.
Click to expand...
Click to collapse
Where to download the firmware updates?
joecd said:
looks that somebody is working hard...new update, but freezes continue.
Click to expand...
Click to collapse
Where to download the firmware from? And what is the procedure for updating the firmware?
When I seek for the info from the web it only points to GeekBuying, which is bloodsuckers.
Have you updated the ROm , what is the procedures?
cracktech said:
Where to download the firmware from? And what is the procedure for updating the firmware?
When I seek for the info from the web it only points to GeekBuying, which is bloodsuckers.
Have you updated the ROm , what is the procedures?
Click to expand...
Click to collapse
Hi huys ,
I also bought this Teamgee exynos 5410 tablet but also have the problem that there is no Google Play store Pre Installed .
So can anyone tell me if there is an easy solution to get Google Play installed on this tablet .
I downloaded the kingo android root and i will give it a shot .
But any other help would be apreciated .
Thanks
---------- Post added at 07:57 AM ---------- Previous post was at 07:55 AM ----------
cracktech said:
Where to download the firmware from? And what is the procedure for updating the firmware?
When I seek for the info from the web it only points to GeekBuying, which is bloodsuckers.
Have you updated the ROm , what is the procedures?
Click to expand...
Click to collapse
Hi huys ,
I also bought this Teamgee exynos 5410 tablet but also have the problem that there is no Google Play store Pre Installed .
So can anyone tell me if there is an easy solution to get Google Play installed on this tablet .
I downloaded the kingo android root and i will give it a shot .
But any other help would be apreciated .
Thanks
How to ROOT and Get Google play on the TeamGee Super8
So i did a small video on how to root your Super8 Exynos 5410 Tablet .
Just to help the Guys that bought the TeamGee Super8 Tablet.
http://www.youtube.com/watch?v=0j5gLhyqonY&feature=share&list=UU1VKeLZCggQvszaAaylnspg
Also i received the new ROM from the TeamGee team ..
In this ROM Google Play is included..
Here is the link to the ROM .
https://mega.co.nz/#!L15nFSgD!CAiraCI5rXMlA2TJyhaIqEBXeBg70_m-GYUKypPeYRE
New ROM received
i received the new ROM from the TeamGee team ..
In this ROM Google Play is included..
Here is the link to the ROM .
https://mega.co.nz/#!L15nFSgD!CAiraCI5rXMlA2TJyhaIqEBXeBg70_m-GYUKypPeYRE
Thank-you!! And to try this Exynos-Abuse Rooting Apk
diquan2001 said:
So i did a small video on how to root your Super8 Exynos 5410 Tablet .
Just to help the Guys that bought the TeamGee Super8 Tablet.
http://www.youtube.com/watch?v=0j5gLhyqonY&feature=share&list=UU1VKeLZCggQvszaAaylnspg
Also i received the new ROM from the TeamGee team ..
In this ROM Google Play is included..
Here is the link to the ROM .
https://mega.co.nz/#!L15nFSgD!CAiraCI5rXMlA2TJyhaIqEBXeBg70_m-GYUKypPeYRE
Click to expand...
Click to collapse
Again my question is how is the flashing process? what Flasher do we use? Methodology. Sorry about that but from my side I could not locate any information on the web to the flashing process. Any help would be greatly appreciated. I am buying in the next 48hrs since I can get it for USD125 nothing like the USD300 that GeekBuying is selling. Might as well buy an APPLE/SAMSUNG at that price.
Flashing steps are included in the zip file.
Just follow the steps.
I Just received the files this morning.
Havent had time to upgrade my tablet yet.
---------- Post added at 11:08 AM ---------- Previous post was at 11:07 AM ----------
Flashing steps are included in the zip file.
Just follow the steps.
I Just received the files this morning.
Havent had time to upgrade my tablet yet.
Oh! I got it it is the same process as my ZENITHINK devices update through sdcard with power+key combination. (in this case the V button) please try the Exynos Rooting file I have attached for you and feedback it is an .apk file that you install on the pad and run it from there.
God bless.
Regards.
Got the flashing process inside the zip folder.
Oh! I got it it is the same process as my ZENITHINK devices update through sdcard with power+key combination. (in this case the V button) please try the Exynos Rooting file I have attached for you and feedback it is an .apk file that you install on the pad and run it from there.
God bless.
Regards.
New ROM instruction Video
Here is the Link for a youtube Video with some instructions how to Install the New ROM On the Super8 TeamGee Tablet.
Please NOTE ROOT IS NOT AVAILABLE WITH THIS NEW ROM YET.
http://youtu.be/8Kh1CZsDtNs
---------- Post added at 10:37 PM ---------- Previous post was at 09:55 PM ----------
Yeah ur Exynos Abuse does not work for the Exynos 5410 .
This seems only to work on the 4412 on my T7 and T7s Tablets.
Thanks though.:good:
cracktech said:
Oh! I got it it is the same process as my ZENITHINK devices update through sdcard with power+key combination. (in this case the V button) please try the Exynos Rooting file I have attached for you and feedback it is an .apk file that you install on the pad and run it from there.
God bless.
Regards.
Click to expand...
Click to collapse
You mean thaere is noway to root it yet? What about the attached file that i ha dgiven you? So thre is no way yet to root it?
cracktech said:
You mean thaere is noway to root it yet? What about the attached file that i ha dgiven you? So thre is no way yet to root it?
Click to expand...
Click to collapse
Yeah il contact the TeamGee boys and ask if they have some other method to root this tablet again with the new ROM..
Thanks, diquan2001
diquan2001 said:
Yeah il contact the TeamGee boys and ask if they have some other method to root this tablet again with the new ROM..
Click to expand...
Click to collapse
Thanks a lot diquan2001, your support here is much appreciated.
I will test the image after the weekend.
Do you know if the freezes and the GPS problem (loses lock after a couple of secs) are solved, too?
best regards,
Alexander
Teamgee Super 8 vs Galaxy Note 3 benchmarking video
Another Video i did with the Super 8 vs the Galaxy Note 3 Benchmarking tests and more..
diquan2001 said:
Another Video i did with the Super 8 vs the Galaxy Note 3 Benchmarking tests and more..
Click to expand...
Click to collapse
Hi again,
thanks for the video.
a) Regarding the GPS test: Just seing some sats does not mean the gps works well. Please wait until it finds a position (sats USED >0) and wait for about 10 minutes if it KEEPS the fix (sats used stays >0 for the entire 10 minutes without going back to 0. Also take a look at accuracy.
b) The freezes that are reported might be due to CPU overheating. Please download droidfish from the market, let it analyze a chess postion for 10 minutes and tell me if the system got frozen/crashed.
THANKS!
I will let you know my impressions with the new firmware.
regards,
Alexander

Got a QiKU 360 N4, tutorial to unlock bootloader is in chinese. Halp!

I hope this is the right thread.
Hello bois, I got a QiKU 360 N4 which is a pretty sick phone for the money I paid it.
It came out recently on the chinese market and its bootloader is locked.
I googled a bit and found some tutorials tho unlock the bootloader and install TWRP, because somebody compiled that already! Awesome, right?
Too bad are in chinese, yeah.
Google translate doesn't help that much, it is incomprehensible, and even if it did help: I am required to sign up to the chinese forum to read the whole tutorial (which requires me to understand how to sign up) and from what I understand the procedure makes use of a software running on windows to enter the bootloader and such software is in chinese only!
So I am looking for some kind soul who could translate the procedure and, if possible, reupload the necessary files somewhere so people like me wouldn't have to sign up to the linked chinese forum to get them.
In exchange I can offer some tips on health and fitness for I have a master in sports sciences. Or, I could offer you a beer?
P.S. sadly xda does not allow me to post links, can link in private... I guess.
Robert Hall said:
I hope this is the right thread.
Hello bois, I got a QiKU 360 N4 which is a pretty sick phone for the money I paid it.
It came out recently on the chinese market and its bootloader is locked.
I googled a bit and found some tutorials tho unlock the bootloader and install TWRP, because somebody compiled that already! Awesome, right?
Too bad are in chinese, yeah.
Google translate doesn't help that much, it is incomprehensible, and even if it did help: I am required to sign up to the chinese forum to read the whole tutorial (which requires me to understand how to sign up) and from what I understand the procedure makes use of a software running on windows to enter the bootloader and such software is in chinese only!
So I am looking for some kind soul who could translate the procedure and, if possible, reupload the necessary files somewhere so people like me wouldn't have to sign up to the linked chinese forum to get them.
In exchange I can offer some tips on health and fitness for I have a master in sports sciences. Or, I could offer you a beer?
P.S. sadly xda does not allow me to post links, can link in private... I guess.
Click to expand...
Click to collapse
Please PM me the link to the website . I don't know Chinese but I remember a root tool that was in Chinese and I will try my best to "mimic" how I got my way around that.
RAZERZDAHACKER said:
Please PM me the link to the website . I don't know Chinese but I remember a root tool that was in Chinese and I will try my best to "mimic" how I got my way around that.
Click to expand...
Click to collapse
I've sent you a message however I don't think you'll manage without knowing chinese
The tool they use is to unlock the bootloader and it's a proprietary tool.
Robert Hall said:
I've sent you a message however I don't think you'll manage without knowing chinese
The tool they use is to unlock the bootloader and it's a proprietary tool.
Click to expand...
Click to collapse
Yea I saw it, I'll see what I can do...
I'm sorry but I did not have time yesterday. I don't have access to a proper computer so I am using my raspberry pi to do all this. Since it does not have a photo editor I am working on a google slide document that will be accessible by link. I'll post it here as fast as I am done
---------- Post added at 10:36 PM ---------- Previous post was at 10:20 PM ----------
Here is how far I have come. I assume you have to download a bunch but at least the company gives you information. I've heard numerous people who buy Chinese phones and are stuck with whatever software they offer.
Yeah there is no chance to write a custom rom because the kernel source is never being given by Mediatek.
However having the ability to backup and play around with the stock firmware is great.
Robert Hall said:
Yeah there is no chance to write a custom rom because the kernel source is never being given by Mediatek.
However having the ability to backup and play around with the stock firmware is great.
Click to expand...
Click to collapse
True, I like how it has become a meme that "I'll die before mtk releases their sources".
Any more news on this? Loving my N4 so far, but would like to install TWRP and gapps, but not quite sure how. Have read somewhere that Kingroot has worked on other Qiku/360 phones but haven't got that far myself. Any chance you could send me that link to me too, your googling skills are clearly far superior to my own!
Hi.
I wiped my data from the stock recovery and now i am stuck at boot logo.I don't know how that happened.but i think i have to flash stock firmware which i cant find anywhere.
Qiku forum is unresponsive and there is no other place with info of this rare phone.
Help me out here please
help me please! I.want to unlock my QIKU N4S, but i can not download from chinese forum. thank you a lot!
Bootloader unlock - HERE
Found some ROM's also .... Althought, You'll Need TAMPERMONKEY and Baidu Download Script for Tampermoney
ROM'S - HERE and other Tools + rom's HERE
There is a whole Qiku N4 forum but it's in chinese .... didnt have time to bother with it,
since it requires to be registered ...
And, as bonus ...
I found Russian modified ROM's ....
HERE for HW version A01
and
HERE for HW version M02
TWRP Recovery - HERE
Check HW version of your phone, if you want to flash roms and BEFORE screwing it up.
Hope that's enough for now ....
p.s. Be carefull what are you doing and flashing into phone. Links I posted are from third party sources,
people reported they are working, but all you do - you do on your own responsibility.
b.r.
Alex
mobilexpert said:
Bootloader unlock - HERE
Found some ROM's also .... Althought, You'll Need TAMPERMONKEY and Baidu Download Script for Tampermoney
ROM'S - HERE and other Tools + rom's HERE
There is a whole Qiku N4 forum but it's in chinese .... didnt have time to bother with it,
since it requires to be registered ...
And, as bonus ...
I found Russian modified ROM's ....
HERE for HW version A01
and
HERE for HW version M02
TWRP Recovery - HERE
Check HW version of your phone, if you want to flash roms and BEFORE screwing it up.
Hope that's enough for now ....
p.s. Be carefull what are you doing and flashing into phone. Links I posted are from third party sources,
people reported they are working, but all you do - you do on your own responsibility.
b.r.
Alex
Click to expand...
Click to collapse
if you want root your phone,you must use ROM V019
mobilexpert said:
ROM'S - HERE and other Tools + rom's HERE
Click to expand...
Click to collapse
Hello Alex,
Those links are sadly down.
Do you know any other link to a stock N4 image and scatter file that I could use to factory-reset a pattern-locked N4 ? I got my hands on a discarded one, but the factory reset option in recovery mode requires that cloud account be first deleted, which I can't to because of the pattern lock.
Thanks !
EDIT :
Sorry, I spoke too fast. I gave another try and the links are up, though in chinese. I'll try to get what I can. Thank you !
I am Chinese
Robert Hall said:
I hope this is the right thread.
Hello bois, I got a QiKU 360 N4 which is a pretty sick phone for the money I paid it.
It came out recently on the chinese market and its bootloader is locked.
I googled a bit and found some tutorials tho unlock the bootloader and install TWRP, because somebody compiled that already! Awesome, right?
Too bad are in chinese, yeah.
Google translate doesn't help that much, it is incomprehensible, and even if it did help: I am required to sign up to the chinese forum to read the whole tutorial (which requires me to understand how to sign up) and from what I understand the procedure makes use of a software running on windows to enter the bootloader and such software is in chinese only!
So I am looking for some kind soul who could translate the procedure and, if possible, reupload the necessary files somewhere so people like me wouldn't have to sign up to the linked chinese forum to get them.
In exchange I can offer some tips on health and fitness for I have a master in sports sciences. Or, I could offer you a beer?
P.S. sadly xda does not allow me to post links, can link in private... I guess.
Click to expand...
Click to collapse
Hello Is the 360n4 on your hand still there? I can help you with the problem!
1915007283 said:
Hello Is the 360n4 on your hand still there? I can help you with the problem!
Click to expand...
Click to collapse
Hi !
I'm not the original poster, but am in the same situation, and have a N360 at hand. Are you willing to help me ?
Hello
breversa said:
Hi !
I'm not the original poster, but am in the same situation, and have a N360 at hand. Are you willing to help me ?
Click to expand...
Click to collapse
Is the cell phone on your hand 360n4? This cell phone has two versions of 360n4 and 360n4s
Yes, it a 360N4, not a 360N4S.
What I'm trying to do is follow that howto : http://www.cnroms.com/360-n4-061-unlock-bootloader-install-twrp-recovery.html to downgrade it, then factory reset it and install TWRP.
However, I can't read chinese (can't even tell whether it's cantonese or mandarin). Google Translate helps, but most link seem to be broken, and when they're not, the download speed is abysmally slow (several days…).
Is there any way you could help me ? Maybe get the needed files and reupload them somewhere faster ?
I see
breversa said:
Yes, it a 360N4, not a 360N4S.
What I'm trying to do is follow that howto : http://www.cnroms.com/360-n4-061-unlock-bootloader-install-twrp-recovery.html to downgrade it, then factory reset it and install TWRP.
However, I can't read chinese (can't even tell whether it's cantonese or mandarin). Google Translate helps, but most link seem to be broken, and when they're not, the download speed is abysmally slow (several days…).
Is there any way you could help me ? Maybe get the needed files and reupload them somewhere faster ?
Click to expand...
Click to collapse
We have a lot of links, and if you have QQ, I think I can give you faster links
Because I don't know what tools you use to chat
1915007283 said:
We have a lot of links, and if you have QQ, I think I can give you faster links
Because I don't know what tools you use to chat
Click to expand...
Click to collapse
QQ ? What's that ?
In case your links are private, why not using private messages on this here forum ?
I'm sorry
breversa said:
QQ ? What's that ?
In case your links are private, why not using private messages on this here forum ?
Click to expand...
Click to collapse
I just came to this forum, I still don't know how to send messages

Blu Life One X2/ Mini - Development

Welcome.
Very short about me: Most of you know me as ieatgravity, I ported TWRP Recovery a little less than a year ago and was able to achieve root on the Life One X2. Since then I have developed guides, auto rooting tools, roms, and I maintain BLOX2.com a dedicated site for all Life One X2 and Mini Development. I apologize for the long absence. However it seems as if this community has really bloomed from where I left off. I want to thank EVERYONE who has supported this development for our phone over the last year, whether it be financially, simple encouragement, thanks, prayers, or you even helping develop something new. I tried my best to credit everyone involved, though many have come and gone we hope YOU will take an interest and try your hand at developing!
As of now we have all been using the first thread we had for our device as a catch all for development, apps, support, general q&a's. Though it has worked for us up until now, a few of us have decided that we should have a dedicated thread to development ideas, topics and questions to keep everything organized.
For now this thread will support both the X2 & Mini. So when you post, please specify the device.
Table of contents:
List of current development to date
Great "How To's" and Guides
With all of that said, here is a consolidated list of all development to this date. If you don't see something on here please let me know and I will update it.
Roms
X2:
Stock - ieatgravity
Blox2core - ieatgravity
Lineage OS 13 - srgrusso
Drax - Draco
X2 Mini:
Stock - papacharlieecho
Minicore - papacharlieecho
Lineage OS 13 - srgrusso
Drax Mini - ieatgravity
Kernels
X2:
Butter Kernel - Draco
X2 Mini:
N/a
Apps:
Both:
Ultra Power Saver - Draco
CRAB-Custom Recovery Automated Backup- Draco
Similar devices
X2:
Redmi 3s
X2 Mini:
Yu Black
Wiko U codeFeel Prime
Source:
X2:
Source
Device Tree
X2 Mini:
TBA​
In the next post I will go over methods we have used to create everything. If you have any recommended methods on porting or how to do something feel free to add them. I will be updating and adding to this OP as new things come to light. Feel free to use this thread to post questions about or to show off your new development.
as always, Happy modding
-ieatgravity
Reserved for how tos and guides
Reserved
Another Reserve
Yet another reserved
Hi ieatgravityI have a question for you, I think you can help me. I have one wiko Ufeel prime and I rooted the phone blox2 or with drako auto-root tool wen it hade marshmallow Android. Do you no if this works in nougat 7.1.1? My thanks in advance ?
alex moymoy said:
Hi ieatgravityI have a question for you, I think you can help me. I have one wiko Ufeel prime and I rooted the phone blox2 or with drako auto-root tool wen it hade marshmallow Android. Do you no if this works in nougat 7.1.1? My thanks in advance ?
Click to expand...
Click to collapse
Personally I haven't tried. As I'm still running on marshmallow, but from what I gathered from the wiko thread i started months ago the auto root tools were not successful. So for the time being there is no root for 7.1.1
I confirm we can't flash anything in fastboot mode on ufeel prime 7.1.1.
We are looking for since September. Impossible to root.
foxyone0809 said:
I confirm we can't flash anything in fastboot mode on ufeel prime 7.1.1.
We are looking for since September. Impossible to root.
Click to expand...
Click to collapse
Has anyone attempted using Kingroot.apk (NOT KINGOROOT) to root then use a root flasher like flashify, rashr, official twrp app, to flash the custom recovery. From there root using magisk manager patch the boot.img, reboot into twrp then flash the patched_boot.img to boot partition. While still in TWRP, navigate to the kingroot.apk location within /system/app. Delete the kingroot.apk and reboot. At this point you should have a working systemless root without the sketchiness of using kingroot.
If anyone has the time to test this out let me know the results please.
ieatgravity said:
Has anyone attempted using Kingroot.apk (NOT KINGOROOT) to root then use a root flasher like flashify, rashr, official twrp app, to flash the custom recovery. From there root using magisk manager patch the boot.img, reboot into twrp then flash the patched_boot.img to boot partition. While still in TWRP, navigate to the kingroot.apk location within /system/app. Delete the kingroot.apk and reboot. At this point you should have a working systemless root without the sketchiness of using kingroot.
If anyone has the time to test this out let me know the results please.
Click to expand...
Click to collapse
I have try wit kingroot from pc with USB, but not with apk
Kingroot apk doesn't work
Hi ieatgravity ? about yours drax rom, does it work on wiko U Feel Prime? Maybe it's a dummy question but I have my doubts so it's better to ask you (OP) I think ? thanks in advance
Hi guys. I tried another thing in my Ufeel. One week now I have it with Red Wolf custom recovery and Viper_garlic rom 7.1.2 both for Yureka Black running. Everything works fine only with the recovery not. It's working but not 100%? I'm not a developer and I don't have the knowledge and tools for see what can do to better working. I thing sharing this with you guys it's important. And maybe someone with the knowledge (and time) want to see it. I try to get logs from the problems.
ps. Sorry for the bad English ?
New OTA update in France this morning. Version V39, always android 7.1.1. No bugs anymore with delay for unlock phone at reboot. Now fastboot devices is detected but always impossible to unlock. All commands says "unknown command"
Hi guys ? I found one thread for another wiko and it have the same problem but they found a way. I think maybe works for we to but I have no time ( work and new family member ?) maybe someone want to try
https://forum.xda-developers.com/android/help/root-how-to-root-wiko-view-t3740005
Ps- I tried the "Tinno" code in another wiko in nougat and it worked. Hope this is useful
Hello everybody, I just got the BLOX2 Mini and wanted to start working with it. I can see this thread hasn't been updated and that the blox2.com web is down. Can anyone direct me to the best resource available in order to unlock, install TWRP, root, etc. in the Mini, either in XDA or elsewhere? I noticed there's a long thread on the regular sized BLOX2 but I am not completely sure if what is available there will work in the mini.
Thanks!
Lineage 16 for Blu Life One X2 Mini?
Hi ieatgravity,
Are you still out there?
I'm wondering if Lineage 15 or 16 is also available for the Blu Life One X2 Mini?
Best daraabi
X2 is dead.
Guide to restore to stock and add TWRP/root is here: https://forum.xda-developers.com/showpost.php?p=77932487&postcount=6

Anyone have a Nubia M2 root technique ?

Hi everyone !
I have a ZTE Nubia M2 ( NX551J) and i want to root him.
I try things that i found (Kingroot, adb and fastboot, event the tuto on youtube the b.bat things)
I deduce that this phone did not root yet.
So i try here with hope Do you have a root for this phone or a technique to root it ?
(ps. Please be kind, i'm a beginner in android '3' i touch command line and computer things but phone isn't my better skill :') )
https://translate.google.com/transl...ubia-m2/&tab=comments#comment-7867&edit-text=
This is all there is right now that I can find for the M2. It's translated from Italian to English.
Well...try gizchina.it (forum.gizchina.it/index.php?/topic/1003-sblocco-bootloader-twrp-e-root-per-nubia-m2/)
I really works, have managed to install on my Nubia M2.
Gizchina.it also offers some custom roms for M2.
(I dont speak Italian, but google translate helped a lot!!!)
Wish U luck
ENORMOUSPENIS said:
Hi everyone !
I have a ZTE Nubia M2 ( NX551J) and i want to root him.
I try things that i found (Kingroot, adb and fastboot, event the tuto on youtube the b.bat things)
I deduce that this phone did not root yet.
So i try here with hope Do you have a root for this phone or a technique to root it ?
(ps. Please be kind, i'm a beginner in android '3' i touch command line and computer things but phone isn't my better skill :') )
Click to expand...
Click to collapse
Hello,
Has anyone tried to install Chinese ROM update on a global version of Nbuia M2?
Nubia seems to provide quite some updates on their chinese protal (last one is from 14/03/2018).
And these ROMs apparently include english language.
Any feedback on that ? especially google services.
slimypi said:
Hello,
Has anyone tried to install Chinese ROM update on a global version of Nbuia M2?
Nubia seems to provide quite some updates on their chinese protal (last one is from 14/03/2018).
And these ROMs apparently include english language.
Any feedback on that ? especially google services.
Click to expand...
Click to collapse
NEVER DO THAT. Unless you know how to revert back and so forth.
Sorry for my caps-locking. I have tried it and it resulted in bootloops and locked bootloader -bugs.
Frankly, it took me days of tricking and fixing to get it running again.
Simple heads up: do not simply flash it over it. But you can wipe your while phone and then install the Nubia rom, which I did. Only downside is that dolby Atmos isn't working but I got around that by installing Magisk and a dolby Atmos module.
I tested all giz-china custom ROMs and they are mostly useable. MIUI and Nubia Global rom for the daily driver part. Any others got some weird bugs, so don't install them.

Teclast Master T8 (E8C1) | General thread

Here I will post useful info, firmwares, etc for Teclast T8 master. You can ask any related questions here.
Official Stock firmware
Link: http://www.teclast.com/en/
TWRP+ROOT
Link: https://forum.xda-developers.com/android/help/twrp-root-custom-recovery-teclast-t8-t3892647
Custom ROMs (for TWRP only)
Modified stock ROM: https://forum.xda-developers.com/android/help/firmware-modified-stock-rom-v2-01-t3894124
ASUS ZenUI ROM: https://forum.xda-developers.com/android/help/firmware-asus-zenui-rom-teclast-t8-t3898591
MIUI 10 ROM (stable!): https://forum.xda-developers.com/android/help/firmware-miui-10-rom-teclast-t8-beta-t3910219
Pixel Experience ROM: https://forum.xda-developers.com/android/help/firmware-pixel-experience-rom-teclast-t8-t3919512
Tricks and tips
Messengers (Facebook, Twitter etc) crush problem solutions: https://forum.xda-developers.com/android/help/solution-solving-problem-messengers-t3994365
Facebook login issue fix: https://forum.xda-developers.com/t/solution-facebook-login-issue-in-teclast-t8-e8c1.4169035/
Spare Parts
Battery (tested - suits and works fine): https://aliexpress.ru/item/10050030...earchweb0_0,searchweb201602_,searchweb201603_
Hey man, thanks for your works for this tablet! I've got one in the mail...
What ROM is your your favourite and recommend trying out first?
Sword900 said:
Here I will post useful info, firmwares, etc for Teclast T8 master. You can ask any related questions here.
Official Stock firmware
Link: http://www.teclast.com/en/
TWRP+ROOT
Link: https://forum.xda-developers.com/android/help/twrp-root-custom-recovery-teclast-t8-t3892647
Custom ROMs (for TWRP only)
Modified stock ROM: https://forum.xda-developers.com/android/help/firmware-modified-stock-rom-v2-01-t3894124
ASUS ZenUI ROM: https://forum.xda-developers.com/android/help/firmware-asus-zenui-rom-teclast-t8-t3898591
MIUI 10 ROM (BETA): https://forum.xda-developers.com/android/help/firmware-miui-10-rom-teclast-t8-beta-t3910219
Pixel Experience ROM: https://forum.xda-developers.com/android/help/firmware-pixel-experience-rom-teclast-t8-t3919512
Click to expand...
Click to collapse
_jonte said:
Hey man, thanks for your works for this tablet! I've got one in the mail...
What ROM is your your favourite and recommend trying out first?
Click to expand...
Click to collapse
Just try any you like. Both ASUS and PIXEL Roms are stable
Sword900 said:
Here I will post useful info, firmwares, etc for Teclast T8 master. You can ask any related questions here.
Official Stock firmware
Link: http://www.teclast.com/en/
TWRP+ROOT
Link: https://forum.xda-developers.com/android/help/twrp-root-custom-recovery-teclast-t8-t3892647
Custom ROMs (for TWRP only)
Modified stock ROM: https://forum.xda-developers.com/android/help/firmware-modified-stock-rom-v2-01-t3894124
ASUS ZenUI ROM: https://forum.xda-developers.com/android/help/firmware-asus-zenui-rom-teclast-t8-t3898591
MIUI 10 ROM (BETA): https://forum.xda-developers.com/android/help/firmware-miui-10-rom-teclast-t8-beta-t3910219
Pixel Experience ROM: https://forum.xda-developers.com/android/help/firmware-pixel-experience-rom-teclast-t8-t3919512
Click to expand...
Click to collapse
Sword900 said:
Just try any you like. Both ASUS and PIXEL Roms are stable
Click to expand...
Click to collapse
Do these ROMs have the slight but constant micro-stuttering that the stock ROM has?
I guess all these ROMs are loaded with Google's stuff?
With the exception of Play Store I'd like to be free of the Google fleet of useless apps.
It's great that you've been able to port these ROMs. I hope a lot of people use them. I just have different needs! Tx.
_jonte said:
Do these ROMs have the slight but constant micro-stuttering that the stock ROM has?
Click to expand...
Click to collapse
What do you mean exactly?
doktorspin said:
I guess all these ROMs are loaded with Google's stuff?
With the exception of Play Store I'd like to be free of the Google fleet of useless apps.
It's great that you've been able to port these ROMs. I hope a lot of people use them. I just have different needs! Tx.
Click to expand...
Click to collapse
Yes, all of them. You can "freeze" or delete unwanted Google apps. Do it manually or try to find scripts which can do this automatically.
Hi, I was thinking to buy this tablet.
Can these ROMs fix the issue of too high brightness even at the lowest level?
If not can you recommend a free application to solve the problem?
Better this or teclast m89 pro? Thanks.
dr.Dobermann said:
Hi, I was thinking to buy this tablet.
Can these ROMs fix the issue of too high brightness even at the lowest level?
If not can you recommend a free application to solve the problem?
Better this or teclast m89 pro? Thanks.
Click to expand...
Click to collapse
To solved this brightness issue I use the sFilter app or any other blue light filter app.
But to tell the truth, I wouldn't recommend to buy any Teclast tablet. I have a problem where he doesn't accept the installation of Instagram or Facebook app. I saw that many people have the same problem.
Anyone else with this problem or know how to solve?
Vox.Irae said:
To solved this brightness issue I use the sFilter app or any other blue light filter app.
But to tell the truth, I wouldn't recommend to buy any Teclast tablet. I have a problem where he doesn't accept the installation of Instagram or Facebook app. I saw that many people have the same problem.
Anyone else with this problem or know how to solve?
Click to expand...
Click to collapse
I added solution, check it and let me know if it works for u
It's possible to change brightness limits manually by editing firmware files, If there's a big problem for u and other users I can change its' range sometime. Just let me know what firmware u are using.
Hello dev!
Are you still working on this device firmware? I bought it this month and not even on official site could find updates for, so I don't know if there is any firmware that I should update before using these that you made...
I'm using Pixel Experience and found it great. But I had problems with the initial setup, which always had trouble trying to recover the configuration of another device. When I checked to set up as a new device it work fine.
I could not open Magisk too, but i wanted to disable it and remove, but always shows error when trying. I'll try MIUI in sequence to see if I can.
Another question: The modified Stock has gapps included? (and can I remove root?)
Thank you so much for your work, I was happy to know that have other firmware for this tablet.
PS.: sorry for the "google translator english", my english is poor. lol
the.password said:
Hello dev!
Are you still working on this device firmware? I bought it this month and not even on official site could find updates for, so I don't know if there is any firmware that I should update before using these that you made...
I'm using Pixel Experience and found it great. But I had problems with the initial setup, which always had trouble trying to recover the configuration of another device. When I checked to set up as a new device it work fine.
I could not open Magisk too, but i wanted to disable it and remove, but always shows error when trying. I'll try MIUI in sequence to see if I can.
Another question: The modified Stock has gapps included? (and can I remove root?)
Thank you so much for your work, I was happy to know that have other firmware for this tablet.
PS.: sorry for the "google translator english", my english is poor. lol
Click to expand...
Click to collapse
I use the modified rom and it comes with gapps. And with another very interesting option "PC mode"
DrZocato said:
I use the modified rom and it comes with gapps. And with another very interesting option "PC mode"
Click to expand...
Click to collapse
I used the modified rom too and liked a lot, but I couldn't install some apps through the playstore and had problems to remove root (Magisk). So I installed ASUS ROM and it is very stable and everything is working great. I'll leave it and see what happens!
Thanks!
the.password said:
Hello dev!
Are you still working on this device firmware? I bought it this month and not even on official site could find updates for, so I don't know if there is any firmware that I should update before using these that you made...
I'm using Pixel Experience and found it great. But I had problems with the initial setup, which always had trouble trying to recover the configuration of another device. When I checked to set up as a new device it work fine.
I could not open Magisk too, but i wanted to disable it and remove, but always shows error when trying. I'll try MIUI in sequence to see if I can.
Another question: The modified Stock has gapps included? (and can I remove root?)
Thank you so much for your work, I was happy to know that have other firmware for this tablet.
PS.: sorry for the "google translator english", my english is poor. lol
Click to expand...
Click to collapse
Hello!
1) There is no more firmwares to port for our device. Also I don't know much about modding firmwares, so Pixel was my first successful experiment.
2) Latest official firmware for our device is TOS v2.1 which can be found in appropriative thread here. Seems no more updates will be released for our device.
3) Restoring function is bad idea esp on custom ROM. You should always make clean installation.
4) Custom ROMs can only boot with root access (e.g. Magisk). You cant uninstall it. In other case your device wont boot (Android 7.0 classical issue). P.S Magisk is not like "classic" root, so you can "hide" it for apps that don't work on rooted device.
5) Of course stock ROM includes Gapps. All made changes are listed in topic. Root can'f be removed on any custom ROM (see p.4).
Sword900 said:
Hello!
1) There is no more firmwares to port for our device. Also I don't know much about modding firmwares, so Pixel was my first successful experiment.
2) Latest official firmware for our device is TOS v2.1 which can be found in appropriative thread here. Seems no more updates will be released for our device.
3) Restoring function is bad idea esp on custom ROM. You should always make clean installation.
4) Custom ROMs can only boot with root access (e.g. Magisk). You cant uninstall it. In other case your device wont boot (Android 7.0 classical issue). P.S Magisk is not like "classic" root, so you can "hide" it for apps that don't work on rooted device.
5) Of course stock ROM includes Gapps. All made changes are listed in topic. Root can'f be removed on any custom ROM (see p.4).
Click to expand...
Click to collapse
Thank you!
I gave the tablet to my son, the Stock ROM that came on it is'nt good and so I put the ASUS ZenUI ROM. (After testing all others)
I hide Magisk and the ROM is working perfectly.
Thank you so much for the great work.
Happy 2020.
fix login facebook in Teclast T8
Failed to enter An unexpected error has occurred. Try again later. (IllegalArgumentException: Unknown URL content://com.facebook.katana.provider.UserValuesProvider/user_values)
https://forum.xda-developers.com/android/help/solution-facebook-login-issue-teclast-t4169035
Hi all, just wonder if anyone have some kind of t8 teardown? my t8 volume button is kinda broken like 2 years ago and now its stop functioning. Also the battery is starting to swollen..
wanna try to see part number for it.
alveox said:
Hi all, just wonder if anyone have some kind of t8 teardown? my t8 volume button is kinda broken like 2 years ago and now its stop functioning. Also the battery is starting to swollen..
wanna try to see part number for it.
Click to expand...
Click to collapse
Hi, man! I disassembled our device a year ago. So here you can see batteries photos, btw we have 2 here. I tried to find batteries by their part number but not succeded in it... If you will find it, please let the community know.
Screenshot
Captured with Lightshot
prntscr.com
Screenshot
Captured with Lightshot
prntscr.com
i need flat cable lcd to motherboard
Could you please share the download link of MIUI and Pixel Experience ROM again, the link of Mega has been lost. Thank you
Quannis said:
Could you please share the download link of MIUI and Pixel Experience ROM again, the link of Mega has been lost. Thank you
Click to expand...
Click to collapse
Links were updated. Check it out!

Categories

Resources