Database Info

[Q] MT7-TL10 Can not boot.

Hello, after updating my MT7 - TL10 unbootable .
At startup the screen remains black , the LED flashes orange one and a green three times ( three cycles). With a hard reset is the same except that the screen is white.
Someone already you had this problem ? I begin , thank you kindly help me.

Merlin-69 said:
Hello, after updating my MT7 - TL10 unbootable .
At startup the screen remains black , the LED flashes orange one and a green three times ( three cycles). With a hard reset is the same except that the screen is white.
Someone already you had this problem ? I begin , thank you kindly help me.
Click to expand...
Click to collapse
Which kind of update method did you used? 3bts? Or FORCED UPDATE?
Have you tried to go into STOCK recovery (volume up+power button)? Is it working?
Have you downloaded and put in the DLOAD folder the CORRECT firmware for Ur phone?
Please double check and, in case, better to re-download it (be sure it is the correct one for TL-10).
Then try 3btns again.
If procedure works, it' s always a good thing to gointo stock recovery AFTER UPDATE proceure, and apply a full WIPE CACHE AND WIPE DATA/FACTORY RESET.

Hello Tuddu .
I made a forced update .
The method of the three buttons does not work = more white screen LED flashing amber and green three times ( three cycles).
When I connect it to the charger , it is happening. I fear the worst .

Merlin-69 said:
Hello Tuddu .
I made a forced update .
The method of the three buttons does not work = more white screen LED flashing amber and green three times ( three cycles).
When I connect it to the charger , it is happening. I fear the worst .
Click to expand...
Click to collapse
Have you the stock recovery installed?
Does the recovery works (can you enter into recovery properly?). If not, you should try to re flash the stock recovery, of course if the HAM7 is recognised by Windows.
Differently, i fear, it could be an hardware problem...
Sent from my S5+ using XDA Free mobile app

The situation evolved !
I come now to start the phone mode " Fastboot & Rescuemode ." But then I do not know what to do.

Here you could if the bootloader is open, the respective imgs (boot, recovery cust, and system) or flash when closed, flashing with a Huawei HiSuite FW.

can I use fastboot to install : boot.img , recovery.img , system.img .
I extracted the .img from the firmware.

I would still flash the cust.img. Then fastboot reboot and hope it starts. The question is, what your battery still says.
If it does not start, then it is probably a case for the service.

I Flasher cust.img , boot.img , recovery.img , system.img . But it does not start. What can I do more for the mode " Fastboot and rescuemode " ?

You could still try the Huawei HiSuite. Furthermore you can flash a Stock Rom. Much more remains not.

Then I flash a ROMSTOCK using cmd fastboot

Only works with the HiSuite.

tuddu said:
Which kind of update method did you used? 3bts? Or FORCED UPDATE?
Have you tried to go into STOCK recovery (volume up+power button)? Is it working?
Have you downloaded and put in the DLOAD folder the CORRECT firmware for Ur phone?
Please double check and, in case, better to re-download it (be sure it is the correct one for TL-10).
Then try 3btns again.
If procedure works, it' s always a good thing to gointo stock recovery AFTER UPDATE proceure, and apply a full WIPE CACHE AND WIPE DATA/FACTORY RESET.
Click to expand...
Click to collapse
I also have the same problem. I wonder if you could help me out also. I've been having these problem for 3 weeks now. Here's the story. I was going to sell the phone to my friend, so I was unrooting and installing stock firmware on it. I downloaded the stock firmware from Huawei website. Flash the stock recovery extracted from the firmware update.app. Put the firmware in dload on a newly bought 8GB SanDisk, and forced update. The update failed saying that the update.app could not be found even tho it is under 'root of the sdcard'/dload/upload.app. So I flashed CWM and flash the repacked update.app using the Huawei Update Extractor. It was fine until I redo the forced update process. EMUI showed up half way and failed with the same reason, it could not find the update.app. I restart the phone and it is bricked.
Condition right now. BL is unlocked.
- Turn on normally: It flashes [Red Green Green Green] x 3 before turning off.
- Turn on with Vol+ + Power to get to the recovery: Same result as turning on normally.
- Turn on using 3BTNs: It shows "HUAWEI Ascend" logo and stays there for 48 hours. Then I figured it wasn't going to do anything.
- Turn on into bootloader with vol- + power works fine. I can get to the bootloader.
What I've done so far. Most are suggestion on XDA forum, somes are from other sources.
- fastboot flash boot, recovery, cust, userdata, and system of 3 different versions of firmware (MT7-TL10 for Global, Chinese, and MT7-TL09 Global). All firmwares are from Huawei website. None of them work.
- fastboot flash CWM recovery. Didn't work. I could not get to the recovery mode.
- fastboot flash many boot.img from custom roms hoping it would at least take me to the recovery. Didn't work.
- bought another micro sd card, which didn't matter since both cards work fine on other devices.
- Try using older version of Hi-Suite that has the restore function. This is the weird part. Hi-Suite would starts itself as soon as it detects the phone in bootloader mode, but it says "Phone is not connected." Unfortunately, this fails also.
I wish there were a way to force boot the phone into the recovery mode other than the button combos. What do you think I could do? I'll try anything. Thanks.

i have same problem too . anyone get working way ??????

[Q] Help! Can not boot

Hello,
I have big problem. I tried to upgrade to lollipop version, used it for one hour and then decided to get back to kitkat. For the procedure I used some tool from killerdogKD which name is MT7-L09 Unbrick (it is a fastboot). The procedure went, phone rebooted and got stuck in boot loop (only logo is showed for few seconds). Now I can only get in fastboot and rescue mode. I've tried to flash stock rom, but without success. Any suggestions? PS. Yes, I now I am jackass and sorry for my bad English:angel:

Stock recovery installed (extracted from official KK ROM)??? 3 button procedure already tried?

Will not work. Are there no going back. He can recover only 5.1.
For the people hanging in Bootllop because they have the 4.4.X Recovery flashed.
Load zip, go to the boot loader and the two flash imgs.
command:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
If both of the 5.1.
https://mega.co.nz/#!DNw13JhK!7ATC9p...G50saLGZG3vKzM
KK is not possible 5.1, just with dload the flash 5.1 again. Is indeed just about the one that has 5.1 Recovery again.
Here read next time.
http://forum.xda-developers.com/mate-7/general/mate-7-update-to-lollipop-screenshots-t3125227/page28

I have the same problem and probably caused by same thing. But I can' even enter bootloader. When phone was bootlooping, I turned it off. Then I tried to get into recovery (by holding power + volume down), but phone always shut down after Huawei logo appears (shut down with short vibration).
It does not matter when I release the buttons, I also tried the recovery (vol up + power) or the force update mode (vol up + vol down + power).
Is there any solution to this? I really hope so...

Look at my post and Liks.

Thank you Fooox1 for trying to help, but the problem is, that I can't even enter the bootloader (and your steps require that). I think that international Mate7 have different key combination for entering bootloader? Check also this: http://forum.xda-developers.com/mate-7/help/fastboot-mode-t3086531
It is true that even before I was not able to get into bootloader with vol down + power, so maybe there is just different key combination or it is not possible at all...
I think I will try to write to Huawei support.

In the bootloader you come when the power is off and you Vol - holding down, then to the PC. To turn it off properly you must Vol - and Power button until it vibrates.
Key combination is the same for all.

I know, that is what I am doing it. And I already did it with many other phones successfully, so its not like this is my first time.
I am holding down power + vol down
Phone vibrates, I am still holding both buttons
Huawei logo appears, I am releasing power button, but still holding vol down button
Phone vibrates and turn off
I also tried to release power button when phone vibrates, or not release both buttons at all or I don't know what else. Tried 100x times.
I will try to contact Huawei, maybe it is known issue. It should really be same key combinations for all devices.
Thank you.

The Mate mus but this depend on the USB, otherwise it does not come into the bootloader.

Whoa! I did it. Yes, it was connected in USB, but in quickcharge USB. I tried different one and I am in!
For some reason, it did not like the quickcharge USB port, strange.
@Fooox1: but thank you, with your last comment I got the idea to try different USB

Well, I am little bit furhter, but still not working unfortunately. I got into bootloader, I flashed the boot and recovery. Then I was trying to three buttons force update and it is still failing.
I have Update.zip in dload folder on sd card, but update is failing immediatelly...

So now, I started the three buttons update while connected to computer via USB and it is actually doing something. But it is too soon to say if it helped (43%).

can't boot too
I need your help Guy's
My Mate 7 did not start after i rooted the lollipop rom with kingroot. I tried to put back the 5.1 boot.img and the recovery.img. After that i tried to flash the ota 5.1 rom agian with the 3 bottons mode. The phone startet the Update but it get stocked by 90%. I waited ca. 10 min after i just rebooted the phone. Now the Phone starts with the Huawei Ascend sign two times and after that i am in recovery mode. I don't know what i can do now! Can anyone help me please?

Yes, I have the same problem

driver84 said:
I need your help Guy's
My Mate 7 did not start after i rooted the lollipop rom with kingroot. I tried to put back the 5.1 boot.img and the recovery.img. After that i tried to flash the ota 5.1 rom agian with the 3 bottons mode. The phone startet the Update but it get stocked by 90%. I waited ca. 10 min after i just rebooted the phone. Now the Phone starts with the Huawei Ascend sign two times and after that i am in recovery mode. I don't know what i can do now! Can anyone help me please?
Click to expand...
Click to collapse
Same here! Help!
must we send in warranty?

So it seems to me, that problem is Huawei. Once, they are using Update.APP and later Update.ZIP, not sure why.
- recovery from 5.1 is working, but it is expectin Update.APP, but 5.1 update is in Update.ZIP, so it fails immediately (with error Update.APP not found). Yes, when you connect to phone to computer, it seems that it is doing something and it will get to 90%. But it is actually doing nothing, you can even pull out the sd card and it is the same. I think it is waiting for some action from computer, but not sure which (I also tried to install HiSuite and do something with it, but no success).
- recovery from update B137 will accept Update.ZIP, but when you try to flash it you won't be able to get in it, it is not working (I also tried B127).
So now, we either need recovery, which will work on 5.1 and will accept Update.ZIP or we need update packed as Update.APP (and yes, I tried to rename it etc.). So actually, our phones are pretty ok, we can get in recovery etc., but Huawei is messing with this different formats for some reason
@Fooox1: Do you have any ideas? Maybe you have another bootloader / recovery image? How did you got the 5.1? Thank you...
Edit: maybe the problem is, that we are trying to run the update OTA (Update.ZIP) instead of full rom (Update.APP)? Is this how it is divided, Update.ZIP is just incremental update, while Update.APP is full rom? If that is the case, we will need the full rom, maybe Huawei can release it?

I have not the problem, but users in our forum. I have the boat and recovery.img from the update unzip, a user has then flashed via fastboot and sin device was running again. For him only recovery was gone after he has the Kang Recovery flashed. The Update.zip he did not need to flash.
Other users have only the boot and recovery.img flashed and then the not unpacked update.zip in a folder (dload) on the SD and these then flashed three fingers method. What also has to work.
Here is still the boat and recovery.img of 5.1.
https://mega.co.nz/#!DNw13JhK!7ATC9pAUID0VyX5N3pQwQLbb_VyuOG50saLGZG3vKzM
And update.zip
https://mega.co.nz/#!vdYlxQIA!P34e3RI-hQT1ZY2WnfOosGmkq2wlr6NViq6ehQuWN5k

I think it may help if somebody will create *.img files from Lollipop, then we might be able to flash it via fastboot (the same as it is in this MT7-L09 Unbrick). I think we will need:
boot.img - ok
cache.img
cust.img
recovery.img - ok
system.img
userdata.img

Can make you yourself. Unzip, when present therein Update.app the extension .app in change .zip and unpack. Now you have another Update.app, this you can unpack the Huaweiextraktor, you've got your files. However, it does not contain all IMGs.
You could try but the resulting Update.app to pack in the dload folder and flash. If so, then the original and encrypted.

Hallo again,
i just called the Huawei Service Center in Germany. They openend up a Ticket for me. They told me to make a factory reset and after that the Phone should boot normaly. I did that, but still the same is happening. The shows the Huawei Ascend Logo 2 times and after that i am in recovery mode again.
The only thing i can do next, is to send the phone to the Huawei Service Center and hopefully i will get it back in 7 Days.

[SOLVED] H60-L02 bricked beyond recovery? Plz help me!

edit: If you are just looking for the solution, plz click here: http://forum.xda-developers.com/showpost.php?p=68626049&postcount=11
Hey there,
first of all I want to say Thank You for this great community and the work at XDA. Awesome. :good:
I bricked my Honor 6 H60-L02 and I am lost to bring it back to life. :crying:
Where it started:
I was using the official ROM from this thread [OFFICIAL] Honor 6 (L02, L12, L04) Stock ROMs. To be more specific it was the latest Android 6.0 EMUI 4.0 B823 that I installed with all the different OTA-Files starting with the original 5.1 ROM B535. The Honor was rooted and also the bootloader is still unlocked (I already checked the status via Fastboot.).
After I while the Honor 6 started to crash sometimes and the headphone-buttons didn't worked anymore. Then a few days ago the phone crashed and I was not able to boot it again.
And so I tried this:
Using the Rollback-Zip to go back to 5.1. But the 3btn-method didn't worked. The phone didn't want to boot into the recovery. Also the Vol+ and Power-Button didn't work to start the Recovery of the phone. Result: Bootloop.
So I installed ADB and Fastboot (with all necessary drivers) and tried to flash the phone with the 5.1 B535 (as mentioned in Honor 6 H60-L02 Hard Bricked - Only access to fastboot (Vol+ and Usb PC)) because there isn't a 6.0 B823 ROM available. I was able to flash boot, recovery, cust, system, userdata and another one I forgot right now. But the result was the same: Bootloop and no 3-btn or recovery via Vol+ and Power-Button. I also tried to flash it with the HonorTool. Same result.
Then I tried to flash different TWRP versions as recovery. Result: The same as above.
So I tried another official ROM 5.1 B526 because someone had the same problem and was able to recover his phone with this ROM (another thread in the forum). But that didn't worked ether.
Then I tried to flash all the img-files of the 5.1. B535 as crc, ptable and so on because I thought that there could be the problem. But when I tried e.g. to flash crc I get the error FAILED: command not allowed. So I tried to unlock the phones partition via Fastboot and fastboot flashine unlock_critical. But using the command unlock_critical gives me also the Failed error. So I was lost again.
Status right now:
I'm still able to boot into the bootloader via Vol- and Power. But right now the phone was running out of battery. Means I see the red battery symbol when I try to start the phone via the power button (without connecting to the PC or charger) but it isn't booting even into the bootloop. The red battery symbol pops up for a second and the screen went black again.
When I use the charger then the symbol changes to a green battery and stays there, but not the moving one that indicates that the phone is charging. When I use the Power button with usb-charger connected to start the phone I'm trapped in the bootloop again.
You see I already tried a lot of different things I could find on the forum. But nothing worked for me.
I know that it was a fault to try to install 5.1 B535 without the rollback, but I wasn't able to rollback as mentioned under point 1.
Maybe anyone could give me a hint and help me to bring my phone back to life.
Thx a lot! I appreciate that al lot!
If you need anymore informations, plz let me know.
Greets, mike175de
P.S: Sorry for my school english. It is a little bit rusty ;o)

mike175de said:
Hey there,
first of all I want to say Thank You for this great community and the work at XDA. Awesome. :good:
I bricked my Honor 6 H60-L02 and I am lost to bring it back to life. :crying:
Where it started:
I was using the official ROM from this thread [OFFICIAL] Honor 6 (L02, L12, L04) Stock ROMs. To be more specific it was the latest Android 6.0 EMUI 4.0 B823 that I installed with all the different OTA-Files starting with the original 5.1 ROM B535. The Honor was rooted and also the bootloader is still unlocked (I already checked the status via Fastboot.).
After I while the Honor 6 started to crash sometimes and the headphone-buttons didn't worked anymore. Then a few days ago the phone crashed and I was not able to boot it again.
And so I tried this:
Using the Rollback-Zip to go back to 5.1. But the 3btn-method didn't worked. The phone didn't want to boot into the recovery. Also the Vol+ and Power-Button didn't work to start the Recovery of the phone. Result: Bootloop.
So I installed ADB and Fastboot (with all necessary drivers) and tried to flash the phone with the 5.1 B535 (as mentioned in Honor 6 H60-L02 Hard Bricked - Only access to fastboot (Vol+ and Usb PC)) because there isn't a 6.0 B823 ROM available. I was able to flash boot, recovery, cust, system, userdata and another one I forgot right now. But the result was the same: Bootloop and no 3-btn or recovery via Vol+ and Power-Button. I also tried to flash it with the HonorTool. Same result.
Then I tried to flash different TWRP versions as recovery. Result: The same as above.
So I tried another official ROM 5.1 B526 because someone had the same problem and was able to recover his phone with this ROM (another thread in the forum). But that didn't worked ether.
Then I tried to flash all the img-files of the 5.1. B535 as crc, ptable and so on because I thought that there could be the problem. But when I tried e.g. to flash crc I get the error FAILED: command not allowed. So I tried to unlock the phones partition via Fastboot and fastboot flashine unlock_critical. But using the command unlock_critical gives me also the Failed error. So I was lost again.
Status right now:
I'm still able to boot into the bootloader via Vol- and Power. But right now the phone was running out of battery. Means I see the red battery symbol when I try to start the phone via the power button (without connecting to the PC or charger) but it isn't booting even into the bootloop. The red battery symbol pops up for a second and the screen went black again.
When I use the charger then the symbol changes to a green battery and stays there, but not the moving one that indicates that the phone is charging. When I use the Power button with usb-charger connected to start the phone I'm trapped in the bootloop again.
You see I already tried a lot of different things I could find on the forum. But nothing worked for me.
I know that it was a fault to try to install 5.1 B535 without the rollback, but I wasn't able to rollback as mentioned under point 1.
Maybe anyone could give me a hint and help me to bring my phone back to life.
Thx a lot! I appreciate that al lot!
If you need anymore informations, plz let me know.
Greets, mike175de
P.S: Sorry for my school english. It is a little bit rusty ;o)
Click to expand...
Click to collapse
Just flash boot, Cust, recovery and system images and let it boot normally. Don't do any button combo. I have had instances where it works. Give it a try.

With which version?
muradulislam said:
Just flash boot, Cust, recovery and system images and let it boot normally. Don't do any button combo. I have had instances where it works. Give it a try.
Click to expand...
Click to collapse
Thx for your reply.
With which version should I flash? B535 or B526? Should I only flash the three images boot, cust and system? Nothing else?
Thx for a reply!

mike175de said:
Thx for your reply.
With which version should I flash? B535 or B526? Should I only flash the three images boot, cust and system? Nothing else?
Thx for a reply!
Click to expand...
Click to collapse
You can use any firmware but the latest one should be better, and flash four images, boot, Cust, system and boot and let it boot normally.
Then put the dload folder with update.app in sd card and do an update from settings.

Thx. I will give it a try when I'm back from work.
I let you know if it is working.

mike175de said:
Thx. I will give it a try when I'm back from work.
I let you know if it is working.
Click to expand...
Click to collapse
I meant to say flash boot, Cust, recovery and system images.
Wrote boot twice

Nothing changed
Hey muradulislam,
Thx again.
I flashed the images (boot.img twice) but without success. Still the same error (with normal booting aka without any special button combination or with button combination). The honor boots and stays in the bootmode aka bootloop with the led blinkin red. And I still can't boot into recovery via Vol+ and Power..
Any other suggestions?
mike

mike175de said:
Hey muradulislam,
Thx again.
I flashed the images (boot.img twice) but without success. Still the same error (with normal booting aka without any special button combination or with button combination). The honor boots and stays in the bootmode aka bootloop with the led blinkin red. And I still can't boot into recovery via Vol+ and Power..
Any other suggestions?
mike
Click to expand...
Click to collapse
Of all the things you have already tried, the only thing remains to take it to a Huawei service center.
May be someone else can help you here but I have read most of honor 6 and 7 posts and I don't think there is anything there for this problem atm.

Hmm, thx. That is bad...
I bought this phone in China when I was there for work. And I suppose that the german service of Huwaei will not help me at all with this phone.
Does anybody else have any clue how to bring the phone back to life?
Thx a lot.

mike175de said:
Hmm, thx. That is bad...
I bought this phone in China when I was there for work. And I suppose that the german service of Huwaei will not help me at all with this phone.
Does anybody else have any clue how to bring the phone back to life?
Thx a lot.
Click to expand...
Click to collapse
I myself have an H60-L01, bought it from china, bricked and tried everything to revive it but could not, still have to try Huawei customer service in Pakistan, am not sure whether they will be able to help me or not, but will give it a try. I wish you luck buddy. Hope you find a solution.

It's alive ;o)
The phone is working again.
Here are the steps I did for everybody else confrontated with same problem:
1. Download your last working ROM or OTA-File: In my case the OTA-File OTA-EMUI 4.0_H60-L02-L12_B811_B823.zip from this Mega-Link:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!KwhlRKYR
2. Unzip the file and extract recovery.img and boot.img with the Huawei Update Extractor (http://forum.xda-developers.com/showthread.php?t=2433454).
3. Boot the phone into fastboot mode (connect the USB cable, press the power button to turn off and immediately press the volume down button).
4. Use fastboot to flash the two images of 2. If you need fatsboot you can find it here http://www.mediafire.com/download/o5ruw752ked884u/adb+H60.zip (Extract adb.zip and copy the extracted files from 2. in the folder adb. In the adb folder run cmd.exe as administrator.)
5. Use this commands for flashing:
fastboot devices => If the device is recognized correctly it is displaying a series of numbers
fastboot flash recovery RECOVERY.img
fastboot flash boot BOOT.img
fastboot reboot
6. Charge the phone with the Huawei charger, not via USB/PC! (50% is enough.)
7. Download in the meantime the Developer ROM H60_EMUI3.1_Android5.1_6.1.1.zip from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
8. Extract the zip file from 7. and copy UPDATE.app onto your SD-Card into /dload
9. Insert the SD without connecting.
9.1. Disconnect the USB cable from your PC or charger.
9.2. Press the Power button to turn off (maybe that is not necessary.)
9.3. When you feel the vibration press 3btn (Vol+ and Vol- and Power).
9.4. When the Honor logo appears connect your SD-Card (continue to press 3btn for 8 -10 more seconds) => Wait for the recovery process, it should start automatically.
10. After installation Android boots. Skip the first step installation (you should now have the 6.1.1. Developer-Edition installed). Rollback to Android 5.1.1 with the Rollback-File Rollback 591 EMUI3.0.zip from here:
http://www.mediafire.com/download/9qrd8zm9280gy5e/Rollback+591+EMUI3.0.zip
Do do so put the unzipped UPDATE.app from the Rollback-File onto your SD-Card and do a local update via the Update Manager.
11. Boot into Android again (it will still be the 6.1.1 Developer Edition). In my case I want to install the latest Android 5.1.1 B535 from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
I did it via local update again.
12.. After installation and booting => Voila here is your working Android 5.1.1 B535 again. Have fun
13. Brick it again with updating to Android 6.0
I hope I could help somebody with my experience to bring his/her phone back to life.
CU, mike

The same can not restore brick
Hello! In what condition I have a phone? My phone is loaded in error func_boot_kernel.

igorxxl said:
Hello! In what condition I have a phone? My phone is loaded in error func_boot_kernel.
Click to expand...
Click to collapse
Have you unlocked and rooted it?
When does it says that message?

error! no func. func_boot_kernel or _recovery
zinko_pt said:
Have you unlocked and rooted it?
When does it says that message?
Click to expand...
Click to collapse
The bootloader is unlocked. Root is. Phone is loaded into the error! no func. func_boot_kernel. If you try to enter into the recovery, the error! no func. func_boot_recovery.
The error is the same as here club.huawei.com/thread-7962289-1-1.html
I tried to put EMUI4.0, then the phone stopped working. Through ADB stitched, weighting system, boot, recovery, cust.img. It shows all ok. But then the error again. He tried to put different versions of TWRP. On the 3 button also does not work.
Thank you for your attention to my problem.

igorxxl said:
The bootloader is unlocked. Root is. Phone is loaded into the error! no func. func_boot_kernel. If you try to enter into the recovery, the error! no func. func_boot_recovery.
The error is the same as here club.huawei.com/thread-7962289-1-1.html
I tried to put EMUI4.0, then the phone stopped working. Through ADB stitched, weighting system, boot, recovery, cust.img. It shows all ok. But then the error again. He tried to put different versions of TWRP. On the 3 button also does not work.
Thank you for your attention to my problem.
Click to expand...
Click to collapse
You can't use 3 button with custom recovery and root. It wont work.
You need stock recovery in the same version as the rest of files used to flash other partitions.
Flash all stock partitions, then just boot the phone. Check if it works. Forget about TWRP and root for now. One thing at a time.

Nothing helps. I sew different versions via Fastboot. Everywhere all shows OK. However, when you restart the exact same mistake again ..

igorxxl said:
Nothing helps. I sew different versions via Fastboot. Everywhere all shows OK. However, when you restart the exact same mistake again ..
Click to expand...
Click to collapse
You can also try installing custom recovery and restore a twrp backup of ROM.

zinko_pt said:
You can't use 3 button with custom recovery and root. It wont work.
You need stock recovery in the same version as the rest of files used to flash other partitions.
Flash all stock partitions, then just boot the phone. Check if it works. Forget about TWRP and root for now. One thing at a time.
Click to expand...
Click to collapse
goldfinv said:
You can also try installing custom recovery and restore a twrp backup of ROM.
Click to expand...
Click to collapse

i'm in the same situation with my honor 6 plus pe-ul00 i'll try this metod!

mike175de said:
The phone is working again.
Here are the steps I did for everybody else confrontated with same problem:
1. Download your last working ROM or OTA-File: In my case the OTA-File OTA-EMUI 4.0_H60-L02-L12_B811_B823.zip from this Mega-Link:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!KwhlRKYR
2. Unzip the file and extract recovery.img and boot.img with the Huawei Update Extractor (http://forum.xda-developers.com/showthread.php?t=2433454).
3. Boot the phone into fastboot mode (connect the USB cable, press the power button to turn off and immediately press the volume down button).
4. Use fastboot to flash the two images of 2. If you need fatsboot you can find it here http://www.mediafire.com/download/o5ruw752ked884u/adb+H60.zip (Extract adb.zip and copy the extracted files from 2. in the folder adb. In the adb folder run cmd.exe as administrator.)
5. Use this commands for flashing:
fastboot devices => If the device is recognized correctly it is displaying a series of numbers
fastboot flash recovery RECOVERY.img
fastboot flash boot BOOT.img
fastboot reboot
6. Charge the phone with the Huawei charger, not via USB/PC! (50% is enough.)
7. Download in the meantime the Developer ROM H60_EMUI3.1_Android5.1_6.1.1.zip from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
8. Extract the zip file from 7. and copy UPDATE.app onto your SD-Card into /dload
9. Insert the SD without connecting.
9.1. Disconnect the USB cable from your PC or charger.
9.2. Press the Power button to turn off (maybe that is not necessary.)
9.3. When you feel the vibration press 3btn (Vol+ and Vol- and Power).
9.4. When the Honor logo appears connect your SD-Card (continue to press 3btn for 8 -10 more seconds) => Wait for the recovery process, it should start automatically.
10. After installation Android boots. Skip the first step installation (you should now have the 6.1.1. Developer-Edition installed). Rollback to Android 5.1.1 with the Rollback-File Rollback 591 EMUI3.0.zip from here:
http://www.mediafire.com/download/9qrd8zm9280gy5e/Rollback+591+EMUI3.0.zip
Do do so put the unzipped UPDATE.app from the Rollback-File onto your SD-Card and do a local update via the Update Manager.
11. Boot into Android again (it will still be the 6.1.1 Developer Edition). In my case I want to install the latest Android 5.1.1 B535 from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
I did it via local update again.
12.. After installation and booting => Voila here is your working Android 5.1.1 B535 again. Have fun
13. Brick it again with updating to Android 6.0 [emoji14]
I hope I could help somebody with my experience to bring his/her phone back to life.
CU, mike
Click to expand...
Click to collapse
I got a problem at 9.3 or 9.4. The recovery wont start i see only honor logo i used PE_EMUI3.1_Android5.1_6.1.1.zip (as developer edition i.e sdcard/dload/UPDATE.APP) and PE-UL00-V100R001CHNC00B200.zip to extract and flash BOOT.img and RECOVERY.img
any ideas why i can't enter in recovery? =(
EDIT: "fixed with DC-Phoenix tool"

Honor 8 Can't Download Firmware, Can't Flash, Bricked? [Solved]

Hi, after trying unlock my bootloader, I couldn't get into recovery mode without "Your phone cannot be trusted" getting stuck on my screen.
I re-locked the boot loader but now when I go into recovery it says "Data Partition is corrupted please format" then it asks me to connect to a wifi network which then just shows errors everytime the password comes up.
I tried to turn on USB Debugging to ADB sideload a firmware, but I can't because the phone has been resetted; if I try to enter a wifi password the keyboard doesnt show it's just the google voice (which doesn't work) with no options. If i skip the wifi option it just goes on the google login and gets stuck on "Checking Info".
Any solutions to the problem please?
EDIT: I just re-unlocked the bootloader and now its permanently stuck on "Your device cannot be trusted, booting now" regardless of what buttons I press during startup
EDIT 2: I fixed it, it was long and complicated but I got it to work, here's how.
1. When flashing TWRP, I realized I was flashing the TWRP for EMUI 4, so I flashed TWRP for EMUI 5. (Make sure Bootloader is unlocked)
First have all the adb/fastboot drivers, for windows shift + right click the folder and click "Open Command here"
Make sure the twrp img file is in the same folder as the adb folder.
On the honor 8 phone, if it is stuck like mine, turn the phone off and then hold Volume Down + Power Button until the download mode is on the screen
Type "fastboot flash recovery (twrpfilename).img"
Once it's done, turn it off and then hold power button + volume up AND volume down at once till TWRP comes on
(Continuously hold it, if the "Your Device cannot be trusted" screen comes on release)
2. (Make sure internal storage and data are backed up externally for this)
Reset system, data, cache/dalvik, and internal storage
3. Download Update.zip and the second .zip from a website on google, search Honor 8 Manual Nougat and click the link from smartstocknews (I can't post links) but do not follow the steps from that website, and also download GAPPS from open GAPPS. Make sure ARM64 is selected and not ARM as well as 7.0
4. After wiping, mount the Honor 8 by connecting it via USB to a computer, and press "Mount" on TWRP
Upload the both update.zip and update_data_full_hw_eu.zip and GAPPS ARM64 7.0 to internal or external storage
5. Exit mount and go to install, install the zips in this specific order and do not reboot in between
A) Update.zip
B) Update_data_full_hw_eu.zip
C) GAPPS.zip
6. Reboot after GAPPS is done (it might show already installed, if that's the case then it's alright, reboot anyways)

Download the 70mb package for firmware downgrade and the latest marshmallow firmware from your regional huawei's website.
Extract the small package and put the .app file in a folder called dload on the SD card and insert it in your phone.
Boot by holding volume + volume - and pressing power, holding all 3 buttons until the phone vibrates.
The package will flash and afterwards you repeat the process, this time using an .app file from the full marshmallow firmware.
The 70mb package installs not matter how messed up your file system is, and makes your phone ready for the MM firmware. This process brings any brick back to life. Good luck.

I too was trying to root my FRD-L04 and apparently used the wrong TWRP because now I get...
Code:
Unable to open ' ' to wipe crypto key
Unable to wipe Data
Unable to format to remove encryption
Failed to mount /data (invalid argument)
and I cant get the keyboard loaded so I can log into my wifi when I do a factory reset. I really have no idea how best to attack this...my phone is bricked I can get into TWRP 3.0.2.0 recovery, sideload, and fastboot (i think). I am currently downloading the stock ROM for my device and will try to sideload it.
I feel I need to fix the data issues thought before trying to load the ROM as I dont think my data partition is working at all now. Does anyone have any suggestions or a step-by-step guide on how to fix my bricked phone?
I've tried all sort of things today but no matter what, I cant get a keyboard working so I guess that means I'm screwed....
EDIT - my phone doesnt have a insertable SD card so I cant fix things the way the above poster suggests.

menriquez said:
I too was trying to root my FRD-L04 and apparently used the wrong TWRP because now I get...
Code:
Unable to open ' ' to wipe crypto key
Unable to wipe Data
Unable to format to remove encryption
Failed to mount /data (invalid argument)
and I cant get the keyboard loaded so I can log into my wifi when I do a factory reset. I really have no idea how best to attack this...my phone is bricked I can get into TWRP 3.0.2.0 recovery, sideload, and fastboot (i think). I am currently downloading the stock ROM for my device and will try to sideload it.
I feel I need to fix the data issues thought before trying to load the ROM as I dont think my data partition is working at all now. Does anyone have any suggestions or a step-by-step guide on how to fix my bricked phone?
I've tried all sort of things today but no matter what, I cant get a keyboard working so I guess that means I'm screwed....
EDIT - my phone doesnt have a insertable SD card so I cant fix things the way the above poster suggests.
Click to expand...
Click to collapse
If you have nougat just flash the correct recovery from the twrp you already have. https://forum.xda-developers.com/honor-8/development/twrp-t3566563

sysak said:
If you have nougat just flash the correct recovery from the twrp you already have. https://forum.xda-developers.com/honor-8/development/twrp-t3566563
Click to expand...
Click to collapse
This is truly one of the worse phones I have ever had when it comes to root and such. My frustration over what, for a unbranded unlocked phone that *should* probably SHIP with root, this phone has and is putting me through is super high.
That being said...so I flashed the new 3.1.0.0 recovery. Before doing that, I had just tried to Unbrick the phone with flashing B162 image with 3.0.3.0...so now the phone is totally frozen in the "Your device has been unlocked and can't be trusted..." screen. Nothing I seem to do can get it out of this mode.
I want to install the rooted b378 boot.img file I just downloaded, but am unable to find the button commands to get the bootloader loaded. Does anyone have any suggestions in somehow trying to save the day with this damned phone?
much thanks in advance.
EDIT: So I got the phone in bootloader mode by pressing vol up/vol down/power and inserting the usb cable...i flashed the rooted boot.img and twrp 3.1.0.1 to both recovery and recovery2 and now i can get into recovery. I feel like I may actually have a chance now to fix this damn thing...
So can anyone point me in a direction where, from this point with the new recovery loaded and the modded boot image installed, where i can get this phone working?? ill use ANY ROM it dont really matter at this point...

Don't worry. It's really easy, once you know what to do, just realy easy to screw up if you don't. If your phone is a mess just roll back to android 6 using the procedure i described above. Once your phone works, update to nougat and install twrp and root following this guide: https://forum.xda-developers.com/honor-8/development/twrp-t3566563

Same issue
Ramonator said:
Hi, after trying unlock my bootloader, I couldn't get into recovery mode without "Your phone cannot be trusted" getting stuck on my screen.
I re-locked the boot loader but now when I go into recovery it says "Data Partition is corrupted please format" then it asks me to connect to a wifi network which then just shows errors everytime the password comes up.
I tried to turn on USB Debugging to ADB sideload a firmware, but I can't because the phone has been resetted; if I try to enter a wifi password the keyboard doesnt show it's just the google voice (which doesn't work) with no options. If i skip the wifi option it just goes on the google login and gets stuck on "Checking Info".
Any solutions to the problem please?
EDIT: I just re-unlocked the bootloader and now its permanently stuck on "Your device cannot be trusted, booting now" regardless of what buttons I press during startup
EDIT 2: I fixed it, it was long and complicated but I got it to work, here's how.
1. When flashing TWRP, I realized I was flashing the TWRP for EMUI 4, so I flashed TWRP for EMUI 5. (Make sure Bootloader is unlocked)
First have all the adb/fastboot drivers, for windows shift + right click the folder and click "Open Command here"
Make sure the twrp img file is in the same folder as the adb folder.
On the honor 8 phone, if it is stuck like mine, turn the phone off and then hold Volume Down + Power Button until the download mode is on the screen
Type "fastboot flash recovery (twrpfilename).img"
Once it's done, turn it off and then hold power button + volume up AND volume down at once till TWRP comes on
(Continuously hold it, if the "Your Device cannot be trusted" screen comes on release)
2. (Make sure internal storage and data are backed up externally for this)
Reset system, data, cache/dalvik, and internal storage
3. Download Update.zip and the second .zip from a website on google, search Honor 8 Manual Nougat and click the link from smartstocknews (I can't post links) but do not follow the steps from that website, and also download GAPPS from open GAPPS. Make sure ARM64 is selected and not ARM as well as 7.0
4. After wiping, mount the Honor 8 by connecting it via USB to a computer, and press "Mount" on TWRP
Upload the both update.zip and update_data_full_hw_eu.zip and GAPPS ARM64 7.0 to internal or external storage
5. Exit mount and go to install, install the zips in this specific order and do not reboot in between
A) Update.zip
B) Update_data_full_hw_eu.zip
C) GAPPS.zip
6. Reboot after GAPPS is done (it might show already installed, if that's the case then it's alright, reboot anyways)
Click to expand...
Click to collapse
I pretty much have the same issue. No keyboard showing, just the stupid voice thing, and the Bootloader is Relocked. How did you get it fully unlocked. I can't get it. I guess let me get that resolved first (the bootloader) and I can try to go from there. Please help me.
UPDATE: Never mind I fixed it. I'm not really for sure how either but I think it mainly was just persistence.

Didn't work
Hello, so earlier today I tried to install RROS newest version in hope to get magisk/unrooting my phone because I'm addicted to snapchat and I rooted my phone with SuperSU earlier but didn't know u can't login to snapchat after that. It failed idk why, (I followed instructions very clearly and searched info from internet before doing that) causing me to brick my phone so when I booted it, it only showed black screen. After couple hours not finding way to get into twrp with my circumstances I managed to flash boot, recovery and system images, I tried to reboot and see what happens, (just in case, I kinda knew I didn't had ROM installed at the time, I also was hoping RROS to boot) nothing happened expect my phone got stuck in boot screen for booting EMUI, which was not installed obviously. Again after couple hours I stumbled to your post and managed to finally get myself into TWRP, I followed again ur instructions and everything was going fine, no erros, not anything. When Gapps was finished installing, I rebooted and again it just got stuck into booting screen. I did press and hold Power button, vol+, vol- and got myself into some kind of ROM installing screen, (hard to explain I don't exactly know what is name of it) and no it wasn't Huawei erecovery screen (Power button & Vol+ and no it didn't work me either saying that "getting package info failed") so in that ROM installing screen it just was stuck at 5% installing, and now I don't know what to do. My phone got locked again and I'm stuck at booting screen.
Note:
I don't have SD Card, should I get one and install stock rom?
Sorry for being kinda unclear but I'm tired it was 7 hours ago I got my phone bricked and have surfed on the web finding for answers ever since.
Also as you might notice, yes, I'm new to modding devices etc but still I'm not totally noob. Please help ASAP.
[SOLVED] So after hour of watching netflix as depressed teen I tried to reboot my phone again just in case, got stuck in booting screen. Then I held Power Button + Vol+ and got myself into EMUI stock recovery mode, I chose wipe cache partition and wipe data/factory reset, after that I rebooted my phone, it was stuck in booting screen for like 2 minutes but then it actually finished booting and now my phone is again functioning and god bless locked & unrooted.

[Bricked] BLN-L24 Can't boot nothing

I was on Elite ROM v7 and I wanted to go back to stock with the official Honor 6X Rollback Package but failed. Now the phone stuck at boot screen. I can't boot into fastboot, no twrp, no stock recovery. 3 button dload method wont work any more. If I hold the power button long enough, the phone will reboot with two vibrations and go right back to "this device is booting" screen. I waited till the battery is depleted and tried every possible combination again, including volume down+plug in usb cable connecting to a pc, still boots into the same screen.
Here's what I have done that caused the brick.
1) while in Elite Rom v7, I power off the phone.
2) dload official intermediate package.
3) dload official 6.0. (it succeeded followed by restart and user reset.
4) the phone then stuck at the blue Honor screen.
5) I force the phone to reboot by holding the power button, the phone entered stock eRecovery. I did a factory reset. The phone still stuck upon reboot.
6) I reboot the phone to fastboot mode and unlock the bootload, after this step, the phone stuck at "this device is booting" screen and wont boot into anything else.
When looking back, I guess between 1 and 2, I should have booted into twrp and format data, which is ecryted.Since I missed this step, it caused the system hung at step 4.

I have a similar problem i thinck it has to do with the warning message i waited until battery was empty and then i got a little different screen wich allows you to enter recovery or boot the device if you get this screen booting will work.
In my case i get the broken screen only if i reboot if i shutdown i get the wirking screen. But my problem is a bir more tricky because the recovery dosent work properly it gives my the option o download stock rom and recovery but it allways failes wehn fetching package info...
The other option i get in the recovery is to shutdown or reboot nothing else
And i can't use fastboot because of the reboot problem...
Using the hardware keys dosent work too...

XelaaleX1234 said:
I have a similar problem i thinck it has to do with the warning message i waited until battery was empty and then i got a little different screen wich allows you to enter recovery or boot the device if you get this screen booting will work.
In my case i get the broken screen only if i reboot if i shutdown i get the wirking screen. But my problem is a bir more tricky because the recovery dosent work properly it gives my the option o download stock rom and recovery but it allways failes wehn fetching package info...
The other option i get in the recovery is to shutdown or reboot nothing else
And i can't use fastboot because of the reboot problem...
Using the hardware keys dosent work too...
Click to expand...
Click to collapse
What reboot problem? Is the usb cable in when your attempting to boot fastboot?
---------- Post added at 01:46 PM ---------- Previous post was at 01:45 PM ----------
shadowcliffs said:
I was on Elite ROM v7 and I wanted to go back to stock with the official Honor 6X Rollback Package but failed. Now the phone stuck at boot screen. I can't boot into fastboot, no twrp, no stock recovery. 3 button dload method wont work any more. If I hold the power button long enough, the phone will reboot with two vibrations and go right back to "this device is booting" screen. I waited till the battery is depleted and tried every possible combination again, including volume down+plug in usb cable connecting to a pc, still boots into the same screen.
Here's what I have done that caused the brick.
1) while in Elite Rom v7, I power off the phone.
2) dload official intermediate package.
3) dload official 6.0. (it succeeded followed by restart and user reset.
4) the phone then stuck at the blue Honor screen.
5) I force the phone to reboot by holding the power button, the phone entered stock eRecovery. I did a factory reset. The phone still stuck upon reboot.
6) I reboot the phone to fastboot mode and unlock the bootload, after this step, the phone stuck at "this device is booting" screen and wont boot into anything else.
When looking back, I guess between 1 and 2, I should have booted into twrp and format data, which is ecryted.Since I missed this step, it caused the system hung at step 4.
Click to expand...
Click to collapse
Follow this guide https://forum.xda-developers.com/honor-6x/how-to/how-to-to-stock-emui-5-0-flashing-twrp-t3679985

Got the solution
After the battery was empty it booted into a little different screen wich i was able to boot from, then i downloaded the firmware and put it into dload folder on external sd. Next i force updated by holding [volume up] [Volume down] and [Power button]. Now i have a working recovery boot and Rom. Everything is stock and the bootloader is locked again.
I discovered this this morbign and didnt had time to answer earlyer sorry for that...
Someone asked because of the bootloader the only thing i got was this broken screen didnt react to my input, cable plugged in plugged out. Maby the warning screen comes before everything or there is not enough time for the timout or whatever... The important thing is that you can fix it that way!:laugh::victory: