I tried to flash cm 10.1.3 on my p5110 and it said that it completed but when i reboot the tablet shuts of but does not turn back on automatically. i have to manually turn it on and when i do it only goes back to the cwm recovery screen. i even tries the twrp recovery and flashed the stock rom using odin but all with the same results!!
Update: after flashing stock rom in Odin, it now says NO COMMAND in the android recovery boot
Hello all,
Samsung Galaxy Note 10.1 N8013
stock firmware 4.1.2
custom recovery TWRP
rooted
I try to boot up the tablet and it gets stuck at the Samsung Galaxy Note 10.1 boot screen. I try to enter recovery, but the TWRP splash screen flashes quickly and the tablet reboots itself. I can only go into Odin mode. I've tried flashing everything, but no success. Odin tells me that it was successful, but once it reboots, it still gets stuck at that Galaxy Note screen. I've tried flashing different recoveries, flashing the most recent recovery, firmware, using different Odin versions, re-installing the drivers a countless amount of times with no luck. I try to get into ADB mode, but it doesn't show up either. I would just be happy to get my recovery or adb again so I can flash it properly. Any help is greatly appreciated, thank you.
bump
TheRCman said:
Hello all,
Samsung Galaxy Note 10.1 N8013
stock firmware 4.1.2
custom recovery TWRP
rooted
I try to boot up the tablet and it gets stuck at the Samsung Galaxy Note 10.1 boot screen. I try to enter recovery, but the TWRP splash screen flashes quickly and the tablet reboots itself. I can only go into Odin mode. I've tried flashing everything, but no success. Odin tells me that it was successful, but once it reboots, it still gets stuck at that Galaxy Note screen. I've tried flashing different recoveries, flashing the most recent recovery, firmware, using different Odin versions, re-installing the drivers a countless amount of times with no luck. I try to get into ADB mode, but it doesn't show up either. I would just be happy to get my recovery or adb again so I can flash it properly. Any help is greatly appreciated, thank you.
Click to expand...
Click to collapse
When you boot into twrp don't hold vol up + power + home too long. Just hold it till you see the Samsung Galaxy Note 10.1 splash screen and it will do the job
Sent from my SM-G800F using XDA Free mobile app
Hi,
have you tried Philz touch? I had a few problems with TWRP, too. Also make sure you are really using the right version for your device.
I have a twinmos twintab t103gq2 and I recently installed a twrp recovery of some other phone thinking that it would work in my tab. When I rebooted my tab it started to boot loop. I tried to go to recovery mode and hard reset it but my tab doesn't boot to recovery mode. Is there a way to fix this without booting to recovery mode. Thnx
I have a Samsung Galaxy S Duos GT-S7562 which stopped working with no warning a few months ago. The device has stock Samsung firmware and has never been rooted.
On power-up the device hangs on the Samsung logo.
When a charger is attached the battery charge animation is frozen.
Both stock recovery and download mode are working.
Attempted a factory reset and clear cache through recovery mode. Both showed as successful. Still hangs at Samsung logo.
Attempted to flash official Samsung stock firmware through Odin3. Flash succeeds with no error but restart still hangs at Samsung logo.
Attempted to flash TWRP recovery through Odin3. Flash succeeds with no error but recovery mode still comes up as stock rather than custom.
Why would Odin3 report a successful TWRP recovery flash but the device still boots the stock recovery? I have another identical S7562 that I successfully flashed the same TWRP recovery and Samsung stock firmware using the same setup, Odin3, PC and USB cable. Both are unlocked devices. Disabling auto-restart in Odin3 and attempting to boot straight to recovery after flashing doesn't help.
I suspect that a JTAG recovery may be my only option but from what I've read it should only be attempted if stock recovery and download mode are *not* working. In my case both appear to be working. Would a JTAG recovery help in this case?
Could there be some sort of NAND memory failure that does not result in any error messages during an Odin3 flash?
Thank you for any help!
I guess JTAG is the only way. Sorry.
Hello
Last week my samsung j4+ got stuck in loop booting. I tried to connect with odin in download mode. It didnt worked, maybe because of the wrong firmware. Yesterday i wantet to try again but now i cant get into recovery mode/download mode anymore. It shows the samsung logo and than shows the recovery mode 1 second and than it flashes away. I cant get into system
Any solutions?