Related
This is an alternative method for SuperCID the Tornado smartphone
Firs of all you need to download the uitils:
http://rapidshare.com/files/132988194/Unlock_SuperCID_Your_SPV_C500_550_600.rar.html
STEPS:
1.Extract files.
2.Now establish a connection between the phone and ActiveSync.
3.From the Decertificare folder copy the file Allow_decert.cab to the root directory of the phone.
4.Install Allow_decert.cab into the phone and reboot it.
5.Establish the connection between phone and ActiveSync then, from the same folder run Semi_decert.exe press Remove Lock button, if the phone was unlocked successfully a message box will appear and ask you to reboot again.
6.Establish the connection between phone and ActiveSync again, then from the Decertificare folder copy the file Full_Decert.cab to the root directory of the phone(Do not install it,just copy it).
7.Finally from the main folder run Lokiwis.bat you will see a msdos window with 4 options:
U-Unlock
L-Lock
C-CID Unlock(SuperCID)
Q-Quit
Select option C and press enter, after this the phone will reboot an your phone will be SuperCID.
To be more sure that your phone is SuperCID and using TeraTermPro util follow next steps:
1.Disable usb connection of the ActiveSync(Uncheck allow usb connections).
2.Unplug usb cable.
3.Turn your phone off.
4.Press the camera button and plug the usb cable(You'll see thw white screen and seconds later the three color screen.
5.Run TeraTermPro.
6.Select Serial and in port: USB then ok
7.Type: info 2
and if in the end of the list you see supercid htc or something like that it's done!!
Close TeraTermPro and just run any ROM you want and voilaa!!
I recomend you to perform a format BINFS before install any ROM
Hope this be useful for you all.
See ya from Mexico!
Hey thanks!
You're welcome! and I hope you'd got SuperCID your phone!!!
Great!!!!
Finally!! all these days without a solution to unlock these phones, then you came my friend and made my day.
Best regards from Colombia
Luis M
Data Crashes.
Followed the procedure precisely and at the end I got:
"Data crashes. Please contact your service provider."
I ran the TeraTerm to check what is the status of info 2:
GetDeviceInfo=0x00000002
GetDeviceCID: Error - InitDecoder
HTCS ´í•6HTCE
Right now I have device with bad CID block. I keep the original backup from lokiwiz, but I don't know how to write it back.
There is a thread for Wizard started and it looks like there is hope, just I need a tool to write the CID backup block back to the device.
Thanks.
SuperCID unsuccessful, Please help!
First SPVServices cannot connect to the remote site.
Then, I tried the alternative using Unlock_SuperCID_Your_SPV_C500_550_600.rar. Followed every step exactly. When I run Lokiwiz.bat, here is the output from the MSDOS window:
....
--------------------
U. Unlock
L. Lock
C. CID Unlock (SuperCID)
Q. Quit
--------------------
Type the letter and press Enter: C
CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
ERROR: Unable to open WinCE file '\windows' - Returned by WSARecv or WSARecvFrom
to indicate the remote party has initiated a graceful shutdown sequence.
opening: lock_backup.bin: No such file or directory
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
PLease, please help! Thank you so much!!!
/dan
TeraTermPro
Hi Bro, you now where i can find TeraTermPro???
if you can upload shotware, it´s better, thank you bro
Thanks !!
Brother thank you very much
to day i can unlock my first SPV C600 with your help
if you need anything from me, it´s done.
msn/email: [email protected]
pdt. afther you have SuperCid, and your phone reboot
run again lokiwis.bat and write U and Press Enter
afther you phone reboot, insert a simcard from
your company and enjoy it
download here teratermpro
unlockboxthis said:
Hi Bro, you now where i can find TeraTermPro???
if you can upload shotware, it´s better, thank you bro
Click to expand...
Click to collapse
Hey sorry for the delay but I've been kind of busy, TeraTermPro can be downloaded from here:
http://rapidshare.com/files/134350178/TeraTermPro.zip.html
hey I saw your post, sorry for the delay mhhh does your phone compatible?? I mean I tested with SDA (US) Tornado and I got success, I think you should try once again but now place files in different root.
to anewbie
anewbie said:
First SPVServices cannot connect to the remote site.
Then, I tried the alternative using Unlock_SuperCID_Your_SPV_C500_550_600.rar. Followed every step exactly. When I run Lokiwiz.bat, here is the output from the MSDOS window:
....
--------------------
U. Unlock
L. Lock
C. CID Unlock (SuperCID)
Q. Quit
--------------------
Type the letter and press Enter: C
CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
ERROR: Unable to open WinCE file '\windows' - Returned by WSARecv or WSARecvFrom
to indicate the remote party has initiated a graceful shutdown sequence.
opening: lock_backup.bin: No such file or directory
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
PLease, please help! Thank you so much!!!
/dan
Click to expand...
Click to collapse
hey I saw your post, sorry for the delay mhhh does your phone compatible?? I mean I tested with SDA (US) Tornado and I got success, I think you should try once again but now place files in different root.
Maybe
d1saster said:
Followed the procedure precisely and at the end I got:
"Data crashes. Please contact your service provider."
I ran the TeraTerm to check what is the status of info 2:
GetDeviceInfo=0x00000002
GetDeviceCID: Error - InitDecoder
HTCS ´í•6HTCE
Right now I have device with bad CID block. I keep the original backup from lokiwiz, but I don't know how to write it back.
There is a thread for Wizard started and it looks like there is hope, just I need a tool to write the CID backup block back to the device.
Thanks.
Click to expand...
Click to collapse
Hey bro why you dont try once again without the simcard??? or first with lokiwis try to unlock the phone and then try again, that may fix the problem
i also followed all the steps and when it reboots finally i get a message saying "data crashes contact oraanges services"
pls help
I vote for sticky!
Hi I have looked all over here and can't work out how to perform the format on the BINFS can someone help me here?
Please help
This tool broke my SP5m.
On startup im receiving a ''Data crash'' error that says ''go to service center''
I cant open my phone.
I reflashed offical i-mate_SP5m_WWE_2.6.331.2.exe rom and it comes again.
Please help.
tera term is showing this when i type ''info 2''
Code:
info 2
GetDeviceInfo=0x00000002
GetDeviceCID: Error - InitDecoder
HTCS ´í•6HTCE
Cmd>
How can i fix that ???
chaqueun said:
Hey bro why you dont try once again without the simcard??? or first with lokiwis try to unlock the phone and then try again, that may fix the problem
Click to expand...
Click to collapse
it dont works man.My phone is unusable with simcard now
Please help?
I tried unlock,cidunlock,lock but there is no difference ((
Hey bro why you dont try once again without the simcard??? or first with lokiwis try to unlock the phone and then try again, that may fix the problem
Click to expand...
Click to collapse
I tried few more times with and without a SIM card, no luck. If somebody doesn't know the lockwiz is designed for HTC Wizard, not for Tornado. Somebody said that ONLY CID unlock would work, but apparently not for all Tornados.
GetDeviceCID: Error - InitDecoder
HTCS ´í•6HTCE
Click to expand...
Click to collapse
Congrats, now you have basic PDA without Phone function. Remove the SIM card and you can use the device at least to back up all your contacts. The problem now is that you have bad COD block, which has the Certificate and the Radio information on it. I had backup of the CID block and tried to reflash it back to the device but the problem was still there. So I went to imei-check.co.uk, paid $40 and they fixed it with the provided software tool and unlock key file. It seems that Tornado has lack of developers, who can provide sophisticated tool which can backup and restore all memory blocks without the end user knowing the hex address of the particular memory block.
Successfully unlocked, thanks
(Qtek 8310)
This is a risky method for many tornados.Please use only spvservices.Dont use this wizard tool.And it can crash wizard too.
it can remove some keys from your sim block or write wrong keys and your phone gives data crashes error when your sim card is in.So you cant use your simcart.
Only the solution for tornado is buying a full unlock flash file that created specially for your imei.I bought it and my phone is working now
On wizard (not tornado) there is a project to rebuild keys without buying imi-check.com sim flash file:
http://forum.xda-developers.com/showthread.php?t=307558
Hello,
I own a Motorola Milestone (rooted, unlocked). Two days ago a weird thing appeared: when i try to activate the wifi, it goes into a Turning on - turning off - turning on etc. loop and i can stop it just if i activate the airplane mode, restart the phone and deactivate the airplane mode. It does not see any wireless network, i can't stop it and i can't connect to any network.
If i try to see the MAC in the wifi settings -> advanced, it writes 00:00:00:00:00:00 when it is in the loop mode. In the service menu, the MAC Address appears Unavailable.
I tried to reflash different firmwares to solve the problem, but no luck. I reflashed the original rom on it, but also: no luck. I tried everything possible with no luck.
In sys/devices/virtual/net/ i don't have any eth0 folder which i think that contains the network drivers.
I didn't drop the phone, i didn't drop anything on it. It appeared from nowhere. There aren't any other problems with the phone. The bluetooth works fine so, i don't think it's a hw problem (i found somewhere that the two hw modules are the same...it's possible that i should got it wrong).
How can i solve it?
PS: i wrote this here because i saw that this happened to different persons around the world but nobody gave an answer. So, i don't think it's phone related.
If this happened to me I would try this:
1: Nandroid backup+Titanium backup
2: Run WiFi Fixer.apk
if it won't help:
3: Try some other ROMs
btw I don't really understand how did you come up with an idea that this is "Milestone Android Development" thread...
1. I don't have any Titanium Backup or nandroid backup
2. WiFi fixer doesn't work
3. i tested CM7, FroyoMod 2.3.3, CM6, original sbf file...nothing works
I posted this here because the other Milestone threads are not read by most of you.
then RMA it.
After you try to enable wifi, paste kernel log (output from 'dmesg' or 'logcat -b kernel' commands) and main log (logcat) to pastebin.com and post links to it here for inspection.
Is your /pds/wifi/nvs_map.bin file in place?
Hello kabaldan,
I was waiting for your reply master.
The /pds/wifi/nvs_map.bin is there but i can see it only in terminal, with ls, after su. In default file explorer from CM7, the folder is empty.
Here is the output of dmesg: http://pastebin.com/Ngz9iaQU
I'm currently using CM7 RC15 (the last night build).
PS: I promise to donate as soon as i get my money from the company i'm working for.
sdiodrv_data_xfer_sync() transfer error! STAT = 0x108011
Click to expand...
Click to collapse
Sorry to say that, but this is a hardware failure. The wlan sd card does not respond to commands sent to it.
You should send your phone for repair.
Hello,
I have two ZTE V970 phones and I copied the contents of one to the other (by backing to nandroid on one, copying the backup to the other and restoring there).
All i sine except that it copied also the IMEI numbers and the MAC address.
I succeeded to chage back the IMEI but the MAC stumps me.
I tried all the methods I found on the net but to no avail.
Is there someone who changed the MAC on a V970 or similar?
Thankfully yours,
Base
Try this: http://forum.xda-developers.com/showthread.php?t=1385577
You have also restored userdata, haven't you? That's most likely the problem. Using a root explorer just go to /data and delete nvram folder. Let it be created from scratch.
hey dev.. please help me.. i have a micromax a110.. mtk6577 device.. unable to change mac using ifconfig, ip link etc.. please help...
Ya please pllzzzz plzzzz help to do it(((
vaidhy2007 said:
hey dev.. please help me.. i have a micromax a110.. mtk6577 device.. unable to change mac using ifconfig, ip link etc.. please help...
Click to expand...
Click to collapse
Even i am facing the same problem unable to change my mac id in MMX A110
baseh said:
Hello,
I have two ZTE V970 phones and I copied the contents of one to the other (by backing to nandroid on one, copying the backup to the other and restoring there).
All i sine except that it copied also the IMEI numbers and the MAC address.
I succeeded to chage back the IMEI but the MAC stumps me.
I tried all the methods I found on the net but to no avail.
Is there someone who changed the MAC on a V970 or similar?
Thankfully yours,
Base
Click to expand...
Click to collapse
Hi! I have a ZTE V970, did you restored the IMEI or changed the IMEI? Is possible change the V970 IMEI?
May Thanks!
Make V970M IMEI & MAC's "permanent"?
bgcngm said:
You have also restored userdata, haven't you? That's most likely the problem. Using a root explorer just go to /data and delete nvram folder. Let it be created from scratch.
Click to expand...
Click to collapse
Hi Bruno, I love your work, specially with V970M phones. Great job by the way.
I have a big problem with one of my phone, broken screen etc., I manage to repair it, format the NVRAM and installed your v1.2. But then I have a similar problem, IMEI's all gone, Wifi with NVRAM ERROR 0x10 and Bluetooth NOK also (these last two keep change everytime I turn them on), since I have 2 phones, I read a bit about this and tried to change de MAC's for the Wifi and BT. Restored the IMEI with Engineer Mode, I then copy the \Data\nvram\APCFG\APRDEB\ folder content, it worked but there's two problems:
1st Both MAC for WIFI and BT are the same as the other device... not good.
2nd Everytime I make a full system reset, it losts all the data EMEI's and MAC's... and I need to input everything again.
I red somewhere, that we can edit the BT_Addr and WIFI (files with APRDEB) with HxD Hex Editor, search for the MAC's and change it, replace the files, but after reboot, the Mac's continue to change everytime I connect the WF & BT (and the error 0x10 appears again).
My question is, there's anyway that I can change the MAC's in MTK Enginner Mode, or use some tools that really work (tried a couple like MAC_Spoof and others but they cannot read the MAC's) and if there's anyway (after all been corrected IMEI & MAC's) to make it "permanent" and everytime I make a full reset or install a new ROM, don't loose all these data?
Thank one more.
Best regards everyone.
JJ
I had the problem with my MMX A177
I was not able to change MAC add in terminal emulator and MAC spoofer
But guys try MTK engineering mode its working for MMX devices.
I was doing this to hack WhatsApp but it verify the device and u register previous device.
Is there any new trick to hack WhatsApp?
I got this phone (Lenovo A606) about a month ago with the following problems:
1) Modem (the one with the SIM card) doesn't work, status in the about section shows "invalid IMEI" and "unknown baseband". SIM card settings are greyed out in the settings.
2) Wi-fi works fine, but i always have an additional SSID in wifi menu that says 0x010 something error
According to previous owner, it went bad after bad flash or update, but he might have been lying and modem is physically dead due to some reason.
3) Serial number is also a blank
So far i've tried:
1) Flashing different stock firmwares with full flash format and DA DL flags checked/unchecked in SP Flash tool
2) Fixing nvram/trying to restore IMEI and SN through numerous tools of different versions: Maui Meta 3g, SN Writer tool, SN Station Writer tool, infinity box CM2MTK, etc - every one of tools that i've tried (i've also tried different versions of the same tools) show me different errors, best solutions online for which are "check your drivers, change usb cable or change computer" all of which i've obviously tried with the exact same result
3) Fixing nvram by deleting nvram folder in /dev/nvram
4) Replacing MP0B_001 in the nvram folder (rather putting it in, the target folder is empty after stock flashing)
5) Using nvram fixes through both custom and stock recovery menus prepared by the poor bastards like me, but with more knowledge about this stuff
6) Flashing nvram from a donor working phone through SP Flash tool
And since i'm making this post nothing of the above has worked.
So far i've came up with two possibilities:
1) The modem is physically dead and i lost in total 72 hours of my life on a goose chase. If this case is true, how can I make sure of it? Is there a low-level recovery menu or a factory mode that can confirm/deny it?
2) I'm doing something wrong and there is a simple fix for it. In this case, I ask for help guide me in the right direction, if possible with exact instructions.
fdxcd said:
I got this phone (Lenovo A606) about a month ago with the following problems:
1) Modem (the one with the SIM card) doesn't work, status in the about section shows "invalid IMEI" and "unknown baseband". SIM card settings are greyed out in the settings.
2) Wi-fi works fine, but i always have an additional SSID in wifi menu that says 0x010 something error
According to previous owner, it went bad after bad flash or update, but he might have been lying and modem is physically dead due to some reason.
3) Serial number is also a blank
So far i've tried:
1) Flashing different stock firmwares with full flash format and DA DL flags checked/unchecked in SP Flash tool
2) Fixing nvram/trying to restore IMEI and SN through numerous tools of different versions: Maui Meta 3g, SN Writer tool, SN Station Writer tool, infinity box CM2MTK, etc - every one of tools that i've tried (i've also tried different versions of the same tools) show me different errors, best solutions online for which are "check your drivers, change usb cable or change computer" all of which i've obviously tried with the exact same result
3) Fixing nvram by deleting nvram folder in /dev/nvram
4) Replacing MP0B_001 in the nvram folder (rather putting it in, the target folder is empty after stock flashing)
5) Using nvram fixes through both custom and stock recovery menus prepared by the poor bastards like me, but with more knowledge about this stuff
6) Flashing nvram from a donor working phone through SP Flash tool
And since i'm making this post nothing of the above has worked.
So far i've came up with two possibilities:
1) The modem is physically dead and i lost in total 72 hours of my life on a goose chase. If this case is true, how can I make sure of it? Is there a low-level recovery menu or a factory mode that can confirm/deny it?
2) I'm doing something wrong and there is a simple fix for it. In this case, I ask for help guide me in the right direction, if possible with exact instructions.
Click to expand...
Click to collapse
Greetings and welcome to assist. Changing IMEI numbers is illegal and can not be discussed on xda so we have to be careful. If you have the original IMEI number it may be possible to restore it with an octoplus box or something similar but we are limited to what can be discussed on xda
Regards
Sawdoctor
sawdoctor said:
Greetings and welcome to assist. Changing IMEI numbers is illegal and can not be discussed on xda so we have to be careful. If you have the original IMEI number it may be possible to restore it with an octoplus box or something similar but we are limited to what can be discussed on xda
Regards
Sawdoctor
Click to expand...
Click to collapse
Never tried to change it, since there wasn't any imei in the firmware to begin with. I only fruitlessly trying to return sim functionality
Anyone left with some humanity is requested to PLEASE HELP ME if you have a Redmi 6a device or know a guy with redmi 6a device.
I actually bricked my device unintentionally and did found a way to get out using SP Flash Tool, However the thing I am stuck in right now is worse than bricking a phone.
Both SIM Cards are not working. I did a lot of research and found that I need two files:
[nvdata.img] [nvram.bin]
Unfortunately I don't have any backup for this. Now what I am looking for is some kind hearted person who can take a backup of their [nvdata] [nvram] partition and give it to me and I'll replace all their data like IMEI numbers etc with my own. I have my IMEI numbers ready to be feeded. I did a lot of try using those engineering ROMS and Tools. NOTHING WORKS!
I regret my decision of jumping in something I don't know about. I want you to please have pity on me so that I don't have to live without my phone.
==============CURRENTLY ON NEGHBOURS WIFI WHO CAN CHANGE PASSWORD ANYTHIME IF HE GETS TO KNOW THAT I HAVE HIS PASSWORD BEFORE HE DOES THIS PLEASE GET ME OUT OF THIS SO THAT I CAN USE MY OWN PHONE FOR INTERNET. I AM COMPLETELY DEPENDENT ON CELLULAR DATA!===============
====YA I AM THIS MUCH POOR!!!==== NO MONEY FOR A NEW PHONE====I AM NOT STEALING ANYONE'S IMEI====PLEASE HELP!=====PLEASE HELP FOR HUMANITY
Edit : root your phone, and then follow this page https://forum.hovatek.com/thread-25458.html it worked for me
Tab E said:
Edit : root your phone, and then follow this page https://forum.hovatek.com/thread-25458.html it worked for me
Click to expand...
Click to collapse
I tried it but it still shows imei unknown. What device is your fixed mobile phone? xiaomi or some other?
IMEI gets added to mobile device when it's built. It's stored in device's /EFS and/or /NVRAM partition. If you haven't backed up this partition before you flashed a new ROM then you have lost unless the IMEI is printed on the box in which device has been delivered.
jwoegerbauer said:
IMEI gets added to mobile device when it's built. It's stored in device's /EFS and/or /NVRAM partition. If you haven't backed up this partition before you flashed a new ROM then you have lost unless the IMEI is printed on the box in which device has been delivered.
Click to expand...
Click to collapse
I have both imei numbers on the phone's box, Thank God, but the problem is how to have them working in the phone
Look inside here:
(2023) How To Change IMEI Number of Android Phones (Latest)
Latest tricks to change the IMEI number of android phones easily without rooting your android phone. so change a serial number of your android device in 2023.
itechhacks.com