Enable LTE bands - Xiaomi Mi A1 Guides, News, & Discussion
Hi. I want to share my experience with you. See, I live in Mexico and here the only available bands for LTE are B4 and B2, and it was nice to see this phone being compatible with B4, so I ordered mine as soon as it was available in black color. It arrived last wednsday, and what I found? That it was not able to connect to LTE, I though it was a configuration problem, but then I revised the manual included in the box and it clearly says it's only compatible with B1/B3/B7/B8/B20/B38/B40. Damn, I felt so bad, I made a little research googling and realized that there are going to be several versions of this phone and the LTE support is going to depend of the selling area. This was hard to accept, but also the key of a posible solution. This is supoused to be a phone sold worldwide, and if there are several versions depending of the selling area I guess is easier and cheaper for production to make exactly the same hardware rather than one for each selling area, so maybe the only constraint for LTE support could posibly be something related to software. And so it was. I wanted to try to modify the NVRAM values to force the SoC to accept B4. For this as you might know you need an unlocked bootloader (for root) and a rooted phone. So, first I unlocked the bootloader, something really easy to do by the way, and then looked for a CF-auto-root zip (it is officially supported by Chainfire), then flashed the boot.img aaaaand, when my phone turned on, IT WAS CONNECTED TO LTE SIGNAL, no NV values were changed, anything else but this was done to make Mi A1 to support LTE B4. I can't see which other bands were enabled, I don't know how to see this since signal guru is not free for this feature anymore, but I assume that also other official supported bands were enabled.
Hope this can help someone else in a similar situation than me. I don't know if flashing a boot partition is enough to change LTE support, if so, its probably that the phone locks again with an update, but I guess that reflashing the boot.img or even a full ROM can make it support LTE bands again, and the worse scenario would be to change NVRAM values cause I alredy confirm that its able to support more bands than stock, I mean, the hardware is there so you just have to enable it. And yes, LTE is working fine with no issues.
Man...I just ordered on and I'm in the United States. It says "4G: FDD LTE B3/ B1/ B4/ B7/ B5/ B8/ B20; TD LTE B38:2600/ B39:1900/ B40:2300 MHz" under Network. I'm with Walmart's Family Mobile (they use T-Mobile's network). They say that you need a GSM phone with either 850 or 1900MHz band.
I hope this works...or else I have to return it...to China.
Can someone else confirm this?
Powered by SRAM said:
Man...I just ordered on and I'm in the United States. It says "4G: FDD LTE B3/ B1/ B4/ B7/ B5/ B8/ B20; TD LTE B38:2600/ B39:1900/ B40:2300 MHz" under Network. I'm with Walmart's Family Mobile (they use T-Mobile's network). They say that you need a GSM phone with either 850 or 1900MHz band.
I hope this works...or else I have to return it...to China.
Click to expand...
Click to collapse
When I bought mine the seller also said in description that it was B4 compatible, but when it arrived and saw the manual page with the phone specs, it clearly said that only supports B 1/3/7/8/20/38/40 (I'll attach a photo), and also the problem that it wasn't able to connect to my local LTE network.
As I said, I can't show you which bands are now enabled, I don't know how, if someone knows a way (different from Signal Guru) just tell me and I'll gladly do it
Edit: Forget about it, finally found how to show LTE bands with signal Guru without buying it. Screenshot attached showhing B 1/3/4/5/7/8/20/38/40 enabled! :silly:
adaltavo said:
When I bought mine the seller also said in description that it was B4 compatible, but when it arrived and saw the manual page with the phone specs, it clearly said that only supports B 1/3/7/8/20/38/40 (I'll attach a photo), and also the problem that it wasn't able to connect to my local LTE network.
As I said, I can't show you which bands are now enabled, I don't know how, if someone knows a way (different from Signal Guru) just tell me and I'll gladly do it
Edit: Forget about it, finally found how to show LTE bands with signal Guru without buying it. Screenshot attached showhing B 1/3/4/5/7/8/20/38/40 enabled! :silly:
Click to expand...
Click to collapse
I ordered my phone through Aliexpress...so whenever I recieve it...I'll pop in my sim and see. I'm pretty sure you're right...but I can still hope. China is on Holiday at the moment...apparently the entire country is shut down.
I know nothing about rooting a device. I've used my phones as is. I'm using a Nextbit Robin right now. Overall I'm pretty happy with the phone...but I want something with a better camera.
Powered by SRAM said:
I ordered my phone through Aliexpress...so whenever I recieve it...I'll pop in my sim and see. I'm pretty sure you're right...but I can still hope. China is on Holiday at the moment...apparently the entire country is shut down.
I know nothing about rooting a device. I've used my phones as is. I'm using a Nextbit Robin right now. Overall I'm pretty happy with the phone...but I want something with a better camera.
Click to expand...
Click to collapse
Oh true, I guess the whole country stops like for 2 weeks, you'll have to wait a little longer. And I hope your version gets B4 stock enabled, but if it isn't, is not a hard process, practically all you'll have to do is copy paste some command lines to your terminal/cmd window. Is a really developer friendly phone, is really easy to unlock the bootloader, and really easy to flash the CF-auto-root image for root, I guess it's been the easiest one I've ever had
Ayudame, misma situación, también soy de Mexico - In the same situation
adaltavo said:
Hi. I want to share my experience with you. See, I live in Mexico and here the only available bands for LTE are B4 and B2, and it was nice to see this phone being compatible with B4, so I ordered mine as soon as it was available in black color. It arrived last wednsday, and what I found? That it was not able to connect to LTE, I though it was a configuration problem, but then I revised the manual included in the box and it clearly says it's only compatible with B1/B3/B7/B8/B20/B38/B40. Damn, I felt so bad, I made a little research googling and realized that there are going to be several versions of this phone and the LTE support is going to depend of the selling area. This was hard to accept, but also the key of a posible solution. This is supoused to be a phone sold worldwide, and if there are several versions depending of the selling area I guess is easier and cheaper for production to make exactly the same hardware rather than one for each selling area, so maybe the only constraint for LTE support could posibly be something related to software. And so it was. I wanted to try to modify the NVRAM values to force the SoC to accept B4. For this as you might know you need an unlocked bootloader (for root) and a rooted phone. So, first I unlocked the bootloader, something really easy to do by the way, and then looked for a CF-auto-root zip (it is officially supported by Chainfire), then flashed the boot.img aaaaand, when my phone turned on, IT WAS CONNECTED TO LTE SIGNAL, no NV values were changed, anything else but this was done to make Mi A1 to support LTE B4. I can't see which other bands were enabled, I don't know how to see this since signal guru is not free for this feature anymore, but I assume that also other official supported bands were enabled.
Hope this can help someone else in a similar situation than me. I don't know if flashing a boot partition is enough to change LTE support, if so, its probably that the phone locks again with an update, but I guess that reflashing the boot.img or even a full ROM can make it support LTE bands again, and the worse scenario would be to change NVRAM values cause I alredy confirm that its able to support more bands than stock, I mean, the hardware is there so you just have to enable it. And yes, LTE is working fine with no issues.
Click to expand...
Click to collapse
Hola, también soy de México y la verdad es que me a pasado exactamente lo mismo que dices que te paso a ti, me enamore del teléfono y lo compre en cuanto vi que un vendedor lo ofrecía diciendo que funcionaba en B4 y de igual manera cuando me llego al ver el manual y probarlo me decepcione. Porfavor te pido amablemente que si lograste hacer que funcionara la banda B4 me ayudes a hacerlo funcionar en el mio, ayúdame explicándome bien cual fue tu proceso y los pasos que hiciste.
Gracias amigo ojala y me puedas ayudar de verdad te lo agradecería.
Hello, I'm from Mexico too and the truth is that it happened to me exactly the same as you say that happened to you, I fell in love with the phone and bought it as soon as I saw a seller offering it saying that it worked in B4 and in the same way when I came to see the manual and try it disappoint me. Please kindly ask me if you managed to make it work B4 band help me to make it work in mine, help me explaining well what was your process and the steps you did.
Thank you, my friend, and if you can help me, I really appreciate it.
Mi solución
Igualmente compre un mi a1 en AliExpress y en el folleto no menciona la B4 y al probar con varios chips telcel no daba 4g. Como ultimo recurso reinicie el equipo a fabrica y al empezar las configuraciones iniciales en donde pide escojer el idioma puse español (mexico) y al continuar con las configuraciones se conecto a 4g de telcel. Anteriormente escoji español (españa) y fue cuando no conectaba a 4g
gearstkm said:
Igualmente compre un mi a1 en AliExpress y en el folleto no menciona la B4 y al probar con varios chips telcel no daba 4g. Como ultimo recurso reinicie el equipo a fabrica y al empezar las configuraciones iniciales en donde pide escojer el idioma puse español (mexico) y al continuar con las configuraciones se conecto a 4g de telcel. Anteriormente escoji español (españa) y fue cuando no conectaba a 4g
Click to expand...
Click to collapse
Really that works? Have you a screenshot?
I'm interested, I have the same problem and I would like to fix it.
Thank You!!
gearstkm said:
Igualmente compre un mi a1 en AliExpress y en el folleto no menciona la B4 y al probar con varios chips telcel no daba 4g. Como ultimo recurso reinicie el equipo a fabrica y al empezar las configuraciones iniciales en donde pide escojer el idioma puse español (mexico) y al continuar con las configuraciones se conecto a 4g de telcel. Anteriormente escoji español (españa) y fue cuando no conectaba a 4g
Click to expand...
Click to collapse
Realmente te funciono eso?? Tendras SS por favor, es que pedí el equipo y tengo esa duda!!!
I have ordered this phone from aliexpress as well, I was wondering if it's possible to activate the B28 LTE frequency... Unfortunately is not listed anywhere, I am not sure about it (but could be extremely good here in Australia).
Thank you
Hello guys!
If you buy the global version you don't need to root your phone to get lte band 4, even if that banddon't appear in the manual that come in the box, this is what happened to me:
I setup the phone the first time with out the simcard, and in languaje options just appeared spanish (united states) and spanish, I selected the first one, and.... I only had 3g when I installed the sim card. So I decided to reset the phone, but this time I did it with my lte b4 compatible sim card (at&t México) inside, this time "spanish (México)" appeared in the languaje options! and guess what? now I have 4G! so to have 4g in México you need to select mexican spanish in the initial setup, you can't select it in the menu options after the setup if you select another languaje in the initial setup.
Hola chicos!
Si compran la versión global no tienen que rootear el telefono para tener la banda 4, incluso si en el manual dice que no la tiene, esto es lo que me paso a mi:
Yo configure el teléfono sin la tarjeta sim dentro la primera vez y en opciones de lenguaje solo aparecía Español Estados unidos y Español, yo elegí el primero,y..... solo recibí 3g cuando inserte la tarjeta sim. Así que decidí resetear el teléfono, pero esta vez lo hice con una tarjeta sim compatible con lte banda 4 (at&t México) dentro, esta vez me apareció la opción de "Español (México)"!¿Y adivinen qué? Ahora tengo 4G! Así que para tener 4g en México tienes que elegir español mexicano en la configuración inicial, no puedes elegirlo en las opciones de menú una vez hayas seleccionado otro idioma en la configuración inicial.
adaltavo said:
Hi. I want to share my experience with you. See, I live in Mexico and here the only available bands for LTE are B4 and B2, and it was nice to see this phone being compatible with B4, so I ordered mine as soon as it was available in black color. It arrived last wednsday, and what I found? That it was not able to connect to LTE, I though it was a configuration problem, but then I revised the manual included in the box and it clearly says it's only compatible with B1/B3/B7/B8/B20/B38/B40. Damn, I felt so bad, I made a little research googling and realized that there are going to be several versions of this phone and the LTE support is going to depend of the selling area. This was hard to accept, but also the key of a posible solution. This is supoused to be a phone sold worldwide, and if there are several versions depending of the selling area I guess is easier and cheaper for production to make exactly the same hardware rather than one for each selling area, so maybe the only constraint for LTE support could posibly be something related to software. And so it was. I wanted to try to modify the NVRAM values to force the SoC to accept B4. For this as you might know you need an unlocked bootloader (for root) and a rooted phone. So, first I unlocked the bootloader, something really easy to do by the way, and then looked for a CF-auto-root zip (it is officially supported by Chainfire), then flashed the boot.img aaaaand, when my phone turned on, IT WAS CONNECTED TO LTE SIGNAL, no NV values were changed, anything else but this was done to make Mi A1 to support LTE B4. I can't see which other bands were enabled, I don't know how to see this since signal guru is not free for this feature anymore, but I assume that also other official supported bands were enabled.
Hope this can help someone else in a similar situation than me. I don't know if flashing a boot partition is enough to change LTE support, if so, its probably that the phone locks again with an update, but I guess that reflashing the boot.img or even a full ROM can make it support LTE bands again, and the worse scenario would be to change NVRAM values cause I alredy confirm that its able to support more bands than stock, I mean, the hardware is there so you just have to enable it. And yes, LTE is working fine with no issues.
Click to expand...
Click to collapse
according to xiaomi, the device has all the necessary Bands, only Band 20 for Germany
Darksite93 said:
Realmente te funciono eso?? Tendras SS por favor, es que pedí el equipo y tengo esa duda!!!
Click to expand...
Click to collapse
Hola amigo que tal, de verdad funciona!!!, yo tenia el mismo problema, no me podía conectar al 4G en banda 4, he restablecido a fabrica y seleccionado el idioma "Español México" y ahora funciona sin problemas, actualmente uso AT&T, pero he probado con una SIM de Telcel y también funciona sin problemas (AT&T - Telcel ambos usan la banda 4) No es necesario ser ROOT. Adjunto SS. :good:
Hi, my friend, that really works !!!, I had the same problem, I could not connect to the 4G in band 4 here in Mexico, I have made a factory reset and selected the language "Spanish Mexico" and now it works without problems, currently I use AT&T, but I have tried a Telcel SIM and also works (AT&T - Telcel both of them use B4 here in Mexico), is not necessary ROOT. attached SS :good:
JELugo said:
Really that works? Have you a screenshot?
I'm interested, I have the same problem and I would like to fix it.
Thank You!!
Click to expand...
Click to collapse
This is what the vendor I bought my A1 from says: Tips: "The manual is universal and perhaps you can not find B4 bands in the manual, please update the phone and normally it can use the B4 band with 4G network."
Have you tried updating over WiFi first? I haven't received mine yet. I'm going to update over WiFi and then see if I can get an LTE connection.
Lol...the price increased since I made my order.
Powered by SRAM said:
This is what the vendor I bought my A1 from says: Tips: "The manual is universal and perhaps you can not find B4 bands in the manual, please update the phone and normally it can use the B4 band with 4G network."
Have you tried updating over WiFi first? I haven't received mine yet. I'm going to update over WiFi and then see if I can get an LTE connection.
Lol...the price increased since I made my order.
Click to expand...
Click to collapse
Hola amigo que tal, de verdad funciona!!!, yo tenia el mismo problema, no me podía conectar al 4G en banda 4, he restablecido a fabrica y seleccionado el idioma "Español México" y ahora funciona sin problemas, actualmente uso AT&T, pero he probado con una SIM de Telcel y también funciona sin problemas (AT&T - Telcel ambos usan la banda 4) No es necesario ser ROOT. Adjunto SS. :good:
Hi, my friend, that really works !!!, I had the same problem, I could not connect to the 4G in band 4 here in Mexico, I have made a factory reset and selected the language "Spanish Mexico" and now it works without problems, currently I use AT&T, but I have tried a Telcel SIM and also works (AT&T - Telcel both of them use B4 here in Mexico), is not necessary ROOT. attached SS :good:
View attachment 4297840
View attachment 4297841
View attachment 4297842
I received my phone and inserted my SIM card. While it does say"4G", the internet speed is extremely slow. Less than 1Mbps. I'm on Family Mobile that uses T Mobile's network. I'm in the United States.
---------- Post added at 02:56 PM ---------- Previous post was at 02:45 PM ----------
A YouTube video takes minutes to load.
Here is what I'm seeing,
Darksite93 said:
Realmente te funciono eso?? Tendras SS por favor, es que pedí el equipo y tengo esa duda!!!
Click to expand...
Click to collapse
Si pero olvide mencionar que antes hay que instalar la actualización que sale
It works!!
kakashi_ax said:
Hello guys!
If you buy the global version you don't need to root your phone to get lte band 4, even if that banddon't appear in the manual that come in the box, this is what happened to me:
I setup the phone the first time with out the simcard, and in languaje options just appeared spanish (united states) and spanish, I selected the first one, and.... I only had 3g when I installed the sim card. So I decided to reset the phone, but this time I did it with my lte b4 compatible sim card (at&t México) inside, this time "spanish (México)" appeared in the languaje options! and guess what? now I have 4G! so to have 4g in México you need to select mexican spanish in the initial setup, you can't select it in the menu options after the setup if you select another languaje in the initial setup.
Hola chicos!
Si compran la versión global no tienen que rootear el telefono para tener la banda 4, incluso si en el manual dice que no la tiene, esto es lo que me paso a mi:
Yo configure el teléfono sin la tarjeta sim dentro la primera vez y en opciones de lenguaje solo aparecía Español Estados unidos y Español, yo elegí el primero,y..... solo recibí 3g cuando inserte la tarjeta sim. Así que decidí resetear el teléfono, pero esta vez lo hice con una tarjeta sim compatible con lte banda 4 (at&t México) dentro, esta vez me apareció la opción de "Español (México)"!¿Y adivinen qué? Ahora tengo 4G! Así que para tener 4g en México tienes que elegir español mexicano en la configuración inicial, no puedes elegirlo en las opciones de menú una vez hayas seleccionado otro idioma en la configuración inicial.
Click to expand...
Click to collapse
First, sorry for my english...i´m from Ecuador....I was using CLARO Network..but only with 3G.....I installed the september update and didn´t do a full reset...only changed the lenguage to Español (Ecuador) (deleted all other lenguages)...restart...and now I have 4G....thanks a lot!!!
I live in Puerto Rico and use T-Mobile. I had to change the language to spanish mexico and now it connects to LTE Band 4. Speeds are slow right now because the communication towers are devastated due to hurricane maria. Once they restore power to the Island I show be able to see regular speeds up to 80mbps
Related
I get GSM signal on my Raphael but not 3G
Hello. I can't find info about this issue. My Raphael only gets GSM signal, it can't find the 3G signal. History: I bought this Phone from a guy in USA (I'm from Mexico), he told me that this phone is Locked, but actually it works fine with my SIM here in Mexico, but ONLY in the GSM mode. The phone can't find the 3G signal (With my other phone I get the 3G signal without problem). Questions: Is this phone "partially unlocked"? I mean, the GSM function is Unlocked but the 3G function is Locked. It can be possible? How can I know if my phone is Fully unlocked? I don't want spend my money with the Olipro Unlock Program if this phone is already Unlocked. I hope you can help me guys. Thank you.
did u try to change the rilphone.dll of ur rom and radio?=?? ya cambiaste el rillphone.dll de tu radio y del rom?? si t detecta red gsm de telcel o movi esta liberado del sim
Hola. Thanks for your answer. I didn't change anything on the phone, when I got it a couple of weeks ago I just put my SIM on and It works with the GSM signal. Could you tell me if there is a Software who can tell me if the phone is fully unlocked? No le he cambiado nada al teléfono, tal como lo compre le puse el SIM y funcionó en la red GSM de telcel. ¿Habra un software que me diga si el teléfono ya esta desbloqueado? Porque segun he leido el software de desbloqueo de Olinex u Olipro quita tres tipos de protecciones.
Data connection Motorola Atrix 2 AT&T Unlocked
Hi guys, I bought a Motorola Atrix 2 AT&T Unlocked and I have problems when I try to connect to the internet. I can make/receive phone calls and sms, but no data. I'm from Venezuela and the carrier that I use has HSDPA 850 (It works fine with 3G), so it seems not to be the problem because atrix 2 is a "International Phone". I tried everything, changed manually APNs and still I can't get data connection. Toogled on/off radio and still no data. Searching in phone info I found this: Data State_ DcInactiveState disconnected with last try at 7:59pm Do you have any suggestion? Any help I'll appretiate.
gerardoo23 said: Hi guys, I bought a Motorola Atrix 2 AT&T Unlocked and I have problems when I try to connect to the internet. I can make/receive phone calls and sms, but no data. I'm from Venezuela and the carrier that I use has HSDPA 850 (It works fine with 3G), so it seems not to be the problem because atrix 2 is a "International Phone". I tried everything, changed manually APNs and still I can't get data connection. Toogled on/off radio and still no data. Searching in phone info I found this: Data State_ DcInactiveState disconnected with last try at 7:59pm Do you have any suggestion? Any help I'll appretiate. Click to expand... Click to collapse Quick question do you have the me or the mb model?
Atrix 2 4G MB865
This question belongs in the general section not the developer section. I will have the mods move this.
gerardoo23 said: Hi guys, I bought a Motorola Atrix 2 AT&T Unlocked and I have problems when I try to connect to the internet. I can make/receive phone calls and sms, but no data. I'm from Venezuela and the carrier that I use has HSDPA 850 (It works fine with 3G), so it seems not to be the problem because atrix 2 is a "International Phone". I tried everything, changed manually APNs and still I can't get data connection. Toogled on/off radio and still no data. Searching in phone info I found this: Data State_ DcInactiveState disconnected with last try at 7:59pm Do you have any suggestion? Any help I'll appretiate. Click to expand... Click to collapse It is the Access Point. Please insert your sim card in a different phone, take note of the access points, and then put the sim back into the Atrix 2. It happens many times, that the Atrix 2 is not able to see the Access Points configured inside the sim card. Please let us know if that solves the problem.
gerardoo23 said: Hi guys, I bought a Motorola Atrix 2 AT&T Unlocked and I have problems when I try to connect to the internet. I can make/receive phone calls and sms, but no data. I'm from Venezuela and the carrier that I use has HSDPA 850 (It works fine with 3G), so it seems not to be the problem because atrix 2 is a "International Phone". I tried everything, changed manually APNs and still I can't get data connection. Toogled on/off radio and still no data. Searching in phone info I found this: Data State_ DcInactiveState disconnected with last try at 7:59pm Do you have any suggestion? Any help I'll appretiate. Click to expand... Click to collapse Hola gerardoo23 yo tengo un Mb865 de AT &T liberado por IMEI, cuando lo tuve lo use con Movilnet y trabajo bien: voz, Sms, mms y datos, con Digitel igual salvo que no se conectaba al 3g, con Movistar es otra historia simplemente no te trabajaran los datos hasta que hagas un reporte al 411 o mejor envía un e-mail [email protected] con tus datos y plantea tu problema de conexión puedes agregar que ya varias personas con este equipo han presentado la falla y anexo esta dirección de un foro en el cual un grupo de usuarios atrix el año pasado dieron con la falla, ya movistar conoce el foro solo refierelos y en 24 horas tendrás tu problema resuelto (no puedo dejarte el link porque soy noob) ----> busca un foro llamado "Grupo Android" busca en consultas atrix "problemas de conectividad" Suerte
MrAlcoholico said: Hola gerardoo23 yo tengo un Mb865 de AT &T liberado por IMEI, cuando lo tuve lo use con Movilnet y trabajo bien: voz, Sms, mms y datos, con Digitel igual salvo que no se conectaba al 3g, con Movistar es otra historia simplemente no te trabajaran los datos hasta que hagas un reporte al 411 o mejor envía un e-mail [email protected] con tus datos y plantea tu problema de conexión puedes agregar que ya varias personas con este equipo han presentado la falla y anexo esta dirección de un foro en el cual un grupo de usuarios atrix el año pasado dieron con la falla, ya movistar conoce el foro solo refierelos y en 24 horas tendrás tu problema resuelto (no puedo dejarte el link porque soy noob) ----> busca un foro llamado "Grupo Android" busca en consultas atrix "problemas de conectividad" Suerte Click to expand... Click to collapse Tu hablas ingles? Puede publicar una traducción en Inglés, por favor? This is an English only forum so use Google translate
farshad525hou said: Originally Posted by MrAlcoholico Hola gerardoo23 yo tengo un Mb865 de AT &T liberado por IMEI, cuando lo tuve lo use con Movilnet y trabajo bien: voz, Sms, mms y datos, con Digitel igual salvo que no se conectaba al 3g, con Movistar es otra historia simplemente no te trabajaran los datos hasta que hagas un reporte al 411 o mejor envía un e- mail [email protected] con tus datos y plantea tu problema de conexión puedes agregar que ya varias personas con este equipo han presentado la falla y anexo esta dirección de un foro en el cual un grupo de usuarios atrix el año pasado dieron con la falla, ya movistar conoce el foro solo refierelos y en 24 horas tendrás tu problema resuelto (no puedo dejarte el link porque soy noob) ----> busca un foro llamado "Grupo Android" busca en consultas atrix "problemas de conectividad" Suerte Tu hablas ingles? Puede publicar una traducción en Inglés, por favor? This is an English only forum so use Google translate Click to expand... Click to collapse Hi, of course man Im sorry I should post in English. "HI Gerardo I got an Atrix2 from at&t unlocked, when I got it I used my Movilnet simcard and work perfect sms, voice an data (3g), I used my Digitel simcard and also work sms, data and voice but the hsdpa or 3g dosnt work with this phone, with my Movistar simcard its another history... sms and voice works perfectly but data in Movistar for atrix and atrix 2 have issues (Movistar block the data for those devices noone know why) so in order to use yoyr atrix 2 with movistar you have to call 411 and report or send and email to [email protected] in this email you have to indicate name phone, number and imei/model of the phone them stablish your problem you can added (like I did) this information : last year some movistar atrix users have data conection problems they gather at this forum and they got same problem and Movistar fixed the issue[I cant post links because Im nwebie] but you can found it by google search " grupo android problema de conectividad" www.grupoandroid.com/topic/25752-problema-de-conectividad-de-datos/", they will fix your problem in 24hours (like me). Good luck *Yes, here in Venezuela we still are in 3g... and its crappy *Sorry for the Spanish post
OnePlus 7 and VoLTE
Hi, I have an OP 7 (gm1900 with the latest AA firmware) and my VoLTE doesnt work. I live in Mexico (Telcel carrier, bands 4, 5 and 28) and the 4g+ works fine but the VoLTE doesnt work. When my phone arrived to me ir doesnt had the VoLTE option in the SIM settings so I installed a OnePlus LogKit apk and from there I activated the switch for VoLTE. Restarted the phone but i doesnt work. My previous phone was an unlocked Umidigi Z2 Pro and the VoLTE worked flawessly, just inserted the SIM and the stupid phone showed the VoLTE icon on the taskbar (even after a couple of hard resets the phone recognized the SIM as a VoLTE capable). Any help for my problem? Thank you ?
Maybe try mailing your service provider. It wasn't working for me too and I mailed mine and they activated it from the backend.
Thank, i had solved my problem. Thank you
hugulugu said: Thank, i had solved my problem. Thank you Click to expand... Click to collapse Hi, how did you fix the issue? I am in Australia and have installed the log kit and enabled VoLTE, still not working. Any help is appreciated.
VoLTE TELCEL hugulugu said: Thank, i had solved my problem. Thank you Click to expand... Click to collapse Como lo resolviste?. También soy de México
juve1897 said: Hi, how did you fix the issue? I am in Australia and have installed the log kit and enabled VoLTE, still not working. Any help is appreciated. Click to expand... Click to collapse Follow this guide. I used Row configuration and the VoLTE icon inmediatly showed on the task bar ? https://forum.xda-developers.com/oneplus-7-pro/help/force-enable-volte-vowifi-t3934227
Carlosnvidia said: Como lo resolviste?. También soy de México Click to expand... Click to collapse Sigue está guia, es bien fácil. Yo utilicé la configuración Row y en seguida apareció el icono VoLTE ?? https://forum.xda-developers.com/oneplus-7-pro/help/force-enable-volte-vowifi-t3934227
Carlosnvidia said: Como lo resolviste?. También soy de México Click to expand... Click to collapse Mira, Telcel y el icono de VoLTE
hugulugu said: Follow this guide. I used Row configuration and the VoLTE icon inmediatly showed on the task bar ? https://forum.xda-developers.com/oneplus-7-pro/help/force-enable-volte-vowifi-t3934227 Click to expand... Click to collapse Can you elaborate more? What Row configuration?
PriPhaze said: Can you elaborate more? What Row configuration? Click to expand... Click to collapse Just follow the guide. Then you just know what i'm talking about ??
Yo tambien tengo el GM 1900 version China y no tiene banda LTE 4 (1700/2100) por lo menos eso no figura en la caja y tampoco me levanta LTE. Alguna idea? Gracias! I also have the GM 1900 Chinese version and it has no LTE 4 band (1700/2100) at least that does not appear in the box and does not raise me LTE. Any ideas? Thank you!
nvs84 said: Yo tambien tengo el GM 1900 version China y no tiene banda LTE 4 (1700/2100) por lo menos eso no figura en la caja y tampoco me levanta LTE. Alguna idea? Gracias! Click to expand... Click to collapse Vato, TODOS los OnePlus 7 traen la banda 4. TODOS. Ya sea la versión China o la global traen la banda 4. Algo está fallando por ahí con tu celular. Vato, ALL OnePlus 7 bring band 4. ALL. Either the Chinese or the global version brings the band 4. Something is failing around with your cell phone.
hugulugu said: Mira, Telcel y el icono de VoLTE Click to expand... Click to collapse Pero no entiendo cómo lo habilitante, ya tengo el Logkit instalado, de ah But I do not understand how to enable it, I already have the Logkit installed, from ah
Carlosnvidia said: Pero no entiendo cómo lo habilitante, ya tengo el Logkit instalado, de ah Click to expand... Click to collapse Tienes que seguir las instrucciones del post que te mandé. A parte del LogKit necesitas otras cosas que están en el post. Chécalo bien y me avisas que onda. You have to follow the instructions in the post I sent you. Apart from the LogKit you need other things that are in the post. Check it well and let me know what's up.
Lo hiciste en Android 10? Did you do it on Android 10?
Carlosnvidia said: Lo hiciste en Android 10? Click to expand... Click to collapse Si. En Android 10 y en Android 9 fue el mismo procedimiento. Necesitas el logkit actualizado para activar el switch del VoLTE. Necesitas el apk del engineer mode para activar otro parámetro. Y necesitas seguir el procedimiento del post que te mandé: instalar los controladores de Qualcomm (están en el post) instalar una app que se llama QPST y seguir el procedimiento del post. La neta es una mamada, activas bien fácil el VoLTE. Avísame si pudiste o nel. Yes. In Android 10 and Android 9 it was the same procedure. You need the updated logkit to activate the VoLTE switch. You need the engineer mode apk to activate another parameter. And you need to follow the procedure of the post that I sent you: install the Qualcomm drivers (they are in the post) install an app called QPST and follow the procedure of the post. The net is a blowjob, you activate the VoLTE very easily. Let me know if you could or nel.
@Carlosnvidia @nvs84 @hugulugu Hi, notice that you are discussing a topic in Spanish. Please take note that on XDA you have to post in English. I have used Google Translate to translate your post and edited your original posts. Please put on a translation in future discussion if you want to discuss a topic in your native language. This is for others' reference. Thanks. Jerry Forum Moderator
jerryhou85 said: @Carlosnvidia @nvs84 @hugulugu Hi, notice that you are discussing a topic in Spanish. Please take note that on XDA you have to post in English. I have used Google Translate to translate your post and edited your original posts. Please put on a translation in future discussion if you want to discuss a topic in your native language. This is for others' reference. Thanks. Jerry Forum Moderator Click to expand... Click to collapse Sorry man, wont happen again.
PriPhaze said: Can you elaborate more? What Row configuration? Click to expand... Click to collapse Row Selection doesn't work for me, tell me another selection, please
Carlosnvidia said: Row Selection doesn't work for me, tell me another selection, please Click to expand... Click to collapse For me worked with Row and UK telefonica. Also you need that your sim card already have the VoLTE active. For example, before my OP 7 I haved an Huawei purchased directly from Telcel and in that cellphone i already have VoLTE. Then i purchased an unlocked Umidigi, swaped the sim card and VoLTE worked from the first Time. A mí me sirvió conla configuración Row y ahorita lo traigo con UK Telefonica (la que se menciona en el post de la configuración). Ahora, tienes que tener en cuenta que la sim que estás usando en el OnePlus tiene que tener activo el servicio de VoLTE. Por ejemplo, antes de mi OP 7 yo tenía un Huawei que compré directamente en Telcel y me dieron una sim nueva con el VoLTE activo. Después esa misma sim la pasé a un Umidigi y el VoLTE funcionó sin problemas. Esa misma SIM es la que traigo ahorita en el OP7. La sim que tienes en tu OP7 ya tenía el VoLTE activo? O sea, tu teléfono anterior ya tenía VoLTE?
It is unlocked but disconnected from the network
Hello and greetings from Mexico. A couple of months ago a friend brought me an S20 Note Ultra, and it is not the first time that he brings me cell phones for the family, the detail of this equipment is that it is unlocked but after a second it sends the message that is placed in the image [Change Carrier], I would like to know what I could do to be able to use the equipment since it was for me and I have not been able to use it. I know about flashing roms, but I stopped doing them about 4 years ago. If someone could give me an idea of what to do, I would appreciate it.
Call Verizon?
raul6 said: Call Verizon? Click to expand... Click to collapse He will not let me make the call from Mexico and the person who gave it to me says that he has already contacted them but that they did not give him a solution
No, it is not unlocked. The message that you are seeing means that it is still SIM locked to Verizon. No, aun no esta liberado. El mensaje que aparece quiere decir que aun acepta las SIM de Verizon solamente Cual es la Version de Banda Base del cel? Eso se encuentra en la configuracion, bajo Acerca de-->Informacion de Software
iBowToAndroid said: No, it is not unlocked. The message that you are seeing means that it is still SIM locked to Verizon. No, aun no esta liberado. El mensaje que aparece quiere decir que aun acepta las SIM de Verizon solamente Cual es la Version de Banda Base del cel? Eso se encuentra en la configuracion, bajo Acerca de-->Informacion de Software Click to expand... Click to collapse N986USQS2DUE2
Revilox said: N986USQS2DUE2 Click to expand... Click to collapse Aun no existe metodo para liberarlo, teniendo esa version. No lo actualice mas porque entre mas vieja la version, mayor exito There is no current known method for SIM unlocking that version at this time
iBowToAndroid said: Aun no existe metodo para liberarlo, teniendo esa version. No lo actualice mas porque entre mas vieja la version, mayor exito There is no current known method for SIM unlocking that version at this time Click to expand... Click to collapse Any way to monitor or know when it is available for unlocking? Thanks for your help
Question Problems with VolTe and Fingerprint Reader, not working even when changing regions
Good afternoon! Greetings from Mexico! A few days ago I bought a Realme GT Neo 2, I currently live in Mexico and use a company called "Bait" from Altan Redes (which uses band 28), this information will help me to explain and comment on a question that I have AND I CANNOT SOLVE.
According to the Realme website, my phone is the "realme GT NeoFR(12+256)" version; what I suppose is from France and therefore a version of Europe, so far everything is fine, right?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Well, not because according to the manufacturer's specifications, this super cell phone supports VolTE and supports band 28; when inserting the sim that I have in a OnePlus 5 from the Mexican company Bait with the hope that the VolTE will be activated and I can receive calls or dial, something that for 10 days I tried in a thousand ways and I could never activate said service, call operated and they told me the following "Your equipment is not approved to work with our network" pfffffff!!, and it is curious that said activation option does not appear in the settings.
How do I "half" solve this problem, since it is a dual sim, buy and enter another "BAIT" sim with activated data and use my previous "BAIT" sim, degrading the signal to 2g so that calls can come in and out.
So far I would like to know if anyone has a solution to this problem or has had the same problem that I face.
After reading here on XDA I did the following:
Firstly, the equipment came with the firmware RMX3370_11_A.03; and when reading in detail in the forum I realized that if we use a VPN it is likely that it will release an update to be able to unlock the bootloader and be able to flash the phone and change the region (with this flashing I thought that it could activate the volte or some functions different to be able to use my phone with the "BAIT" operator).
For this first Update I used the psiphon Pro application and the country of France.
https://psiphon.ca/es/download.html
After trying a vpn and a lot of patience the phone first received the RMX3370_11_A.05 update.
After a few days I kept trying to upload the version of the phone and simply with the vpn for hours and connected to WIFI I did not receive anything, that is why I thought what if I change the country when using the VPN? and bingo I was able to update to the RMX3370_11_A.06 version for this case I used the same application but using the vpn of the country of Bulgaria.
With this update it was first possible for me to unlock the booloader following in detail the tutorial of the brother @RMX3370 (thanks for the tutorials)
https://forum.xda-developers.com/t/...2-rmx3370-all-variants.4391679/#post-86396489
Once the bootloader is unlocked install TWRP and Magisk to root the phone; again following in detail the tutorial of the brother @RMX3370
https://forum.xda-developers.com/t/rooting-realme-gt-neo-2-rmx3370-all-models-with-magisk.4392005/
After this process and with the unlocked bootloader flashie and change regions through Europe, India Latam etc.... NOTHING OR ANY version of firmware activated the VolTE.
For flashing, follow in detail the following tutorial from brother @SrCDA:
https://forum.xda-developers.com/t/...ion-relockbootloader-realme-gt-neo-2.4399223/
All this process BooLoader unlocking, flashing, firmware installation (region changes) was done under MacOS BigSur without problems; That's why I tell you to follow all the guides in detail since I see that sometimes they ask many things recursively when the same authors of the guides solve them in the publications.
After trying and trying to get the VolTE to work I have resigned myself to staying in the INDIA region and I am already using the phone for daily use; only now there is another problem THE FINGERPRINT READER DOES NOT WORK, I have tried to put my fingerprints and it is really annoying to unlock it with a code; I have disabled magisk's biometric authentication BUT IT HAS NOT SOLVED ANYTHING.
I've changed the android calling app to avoid the "This call is being recorded" announcement, and uninstalled apps that slow down the phone to leave the stock rom as clean as possible.
It is a fast phone, well configured and I really like it; but I list my problems again:
- There is no VolTE for band 28 of Mexico
- Issue with fingerprint reader shaking when trying to add them to unlock the phone.
Note: if any user requires that I support him in something with all pleasure!; If anyone can ask for my listed problems or faced the same thing and managed to fix them, I would really appreciate some tips to finish configuring my phone!
Thank you very much for reading and for your kind attention, greetings from Mexico!
makuaz said: Good afternoon! Greetings from Mexico! A few days ago I bought a Realme GT Neo 2, I currently live in Mexico and use a company called "Bait" from Altan Redes (which uses band 28), this information will help me to explain and comment on a question that I have AND I CANNOT SOLVE. According to the Realme website, my phone is the "realme GT NeoFR(12+256)" version; what I suppose is from France and therefore a version of Europe, so far everything is fine, right? View attachment 5537279 Well, not because according to the manufacturer's specifications, this super cell phone supports VolTE and supports band 28; when inserting the sim that I have in a OnePlus 5 from the Mexican company Bait with the hope that the VolTE will be activated and I can receive calls or dial, something that for 10 days I tried in a thousand ways and I could never activate said service, call operated and they told me the following "Your equipment is not approved to work with our network" pfffffff!!, and it is curious that said activation option does not appear in the settings. View attachment 5537291 View attachment 5537281 View attachment 5537283 View attachment 5537285 How do I "half" solve this problem, since it is a dual sim, buy and enter another "BAIT" sim with activated data and use my previous "BAIT" sim, degrading the signal to 2g so that calls can come in and out. View attachment 5537289 So far I would like to know if anyone has a solution to this problem or has had the same problem that I face. After reading here on XDA I did the following: Firstly, the equipment came with the firmware RMX3370_11_A.03; and when reading in detail in the forum I realized that if we use a VPN it is likely that it will release an update to be able to unlock the bootloader and be able to flash the phone and change the region (with this flashing I thought that it could activate the volte or some functions different to be able to use my phone with the "BAIT" operator). For this first Update I used the psiphon Pro application and the country of France. View attachment 5537293 https://psiphon.ca/es/download.html After trying a vpn and a lot of patience the phone first received the RMX3370_11_A.05 update. After a few days I kept trying to upload the version of the phone and simply with the vpn for hours and connected to WIFI I did not receive anything, that is why I thought what if I change the country when using the VPN? and bingo I was able to update to the RMX3370_11_A.06 version for this case I used the same application but using the vpn of the country of Bulgaria. With this update it was first possible for me to unlock the booloader following in detail the tutorial of the brother @RMX3370 (thanks for the tutorials) https://forum.xda-developers.com/t/...2-rmx3370-all-variants.4391679/#post-86396489 Once the bootloader is unlocked install TWRP and Magisk to root the phone; again following in detail the tutorial of the brother @RMX3370 https://forum.xda-developers.com/t/rooting-realme-gt-neo-2-rmx3370-all-models-with-magisk.4392005/ After this process and with the unlocked bootloader flashie and change regions through Europe, India Latam etc.... NOTHING OR ANY version of firmware activated the VolTE. For flashing, follow in detail the following tutorial from brother @SrCDA: https://forum.xda-developers.com/t/...ion-relockbootloader-realme-gt-neo-2.4399223/ All this process BooLoader unlocking, flashing, firmware installation (region changes) was done under MacOS BigSur without problems; That's why I tell you to follow all the guides in detail since I see that sometimes they ask many things recursively when the same authors of the guides solve them in the publications. After trying and trying to get the VolTE to work I have resigned myself to staying in the INDIA region and I am already using the phone for daily use; only now there is another problem THE FINGERPRINT READER DOES NOT WORK, I have tried to put my fingerprints and it is really annoying to unlock it with a code; I have disabled magisk's biometric authentication BUT IT HAS NOT SOLVED ANYTHING. I've changed the android calling app to avoid the "This call is being recorded" announcement, and uninstalled apps that slow down the phone to leave the stock rom as clean as possible. It is a fast phone, well configured and I really like it; but I list my problems again: - There is no VolTE for band 28 of Mexico - Issue with fingerprint reader shaking when trying to add them to unlock the phone. Note: if any user requires that I support him in something with all pleasure!; If anyone can ask for my listed problems or faced the same thing and managed to fix them, I would really appreciate some tips to finish configuring my phone! View attachment 5537299 Thank you very much for reading and for your kind attention, greetings from Mexico! Click to expand... Click to collapse Hello, facing same issue, no VOLTE in settings, tried flash europe and china roms, VOLTE still not there, so you are not only one
joksax said: Hello, facing same issue, no VOLTE in settings, tried flash europe and china roms, VOLTE still not there, so you are not only one Click to expand... Click to collapse hello! Good morning, greetings from Mexico, it's good to know that at least I'm not the only one with the problem of activating VolTE, thanks for responding, comrade! Hey can I ask you if you have problems with fingerprint unlocking?
makuaz said: hello! Good morning, greetings from Mexico, it's good to know that at least I'm not the only one with the problem of activating VolTE, thanks for responding, comrade! Hey can I ask you if you have problems with fingerprint unlocking? Click to expand... Click to collapse nope, fingerprint unlocking works perfectly for me
mine also came with the version rmx3370_11_a.03 I'm trying to update but I can't, even with vpn and changing regions I can't, is there anything else I can do? I couldn't find it in the Ota file to install
Arkynne said: mine also came with the version rmx3370_11_a.03 I'm trying to update but I can't, even with vpn and changing regions I can't, is there anything else I can do? I couldn't find it in the Ota file to install Click to expand... Click to collapse rmx3370_11_a.03 ? Where did you buy your GT Neo2 from ?
axialcecal said: rmx3370_11_a.03 ? Where did you buy your GT Neo2 from ? Click to expand... Click to collapse I live in Brazil, so I imported through Aliexpress
Arkynne said: I live in Brazil, so I imported through Aliexpress Click to expand... Click to collapse Ah yes, Aliexpress, that explains the strange version it came with -- Is there no way to flash a.06 using EDL?
axialcecal said: Ah yes, Aliexpress, that explains the strange version it came with -- Is there no way to flash a.06 using EDL? Click to expand... Click to collapse I already did a search, I found the version rmx3370_11_a.06, but the instructions themselves I didn't understand very well. I tried to do it in OTA, but I couldn't find the file. I can even try to do it in EDL, but this is not considered root? Apart from that I came to look for update patches after the wi-fi gives problems of not finding the network, being that other cell phones are connected to the wifi network
Arkynne said: I already did a search, I found the version rmx3370_11_a.06, but the instructions themselves I didn't understand very well. I tried to do it in OTA, but I couldn't find the file. I can even try to do it in EDL, but this is not considered root? Apart from that I came to look for update patches after the wi-fi gives problems of not finding the network, being that other cell phones are connected to the wifi network Click to expand... Click to collapse I just got the phone myself so I haven't started with modifications or unlocking bootloader but considering its a SD 870 I would assume it might be similar to a Oneplus 7 Pro EDL procedure which requires a different button combo and different USB drivers from Qualcomm. The page I found here seems to show similar steps https://realmefirmware.com/how-to-flash/ and the download for global a.06 and india 1.07 [https://realmefirmware.com/realme-gt-neo2-5g-firmware/] But I won't be doing that yet but from my own experiences on other phones it looks like the right path. Lots of people in other threads are mentioning inconsistent functionality so there might be more to it too. I guess it might be beneficial to keep watching and waiting. My phone is from Banggood I'm on a.06 from purchase. I am in Australia.
I understand, well I even thought about buying from Bangood, but I didn't have it in green, lol, apparently it's the right way, but MSM doesn't accept my login credentials.Even if I were to do it now, I wouldn't notice, and even because I have to back up all the files, Irati get my old cell phone for this and format this one and try to do it. I hope to keep in touch with you, as you seem to be experienced
Arkynne said: I understand, well I even thought about buying from Bangood, but I didn't have it in green, lol, apparently it's the right way, but MSM doesn't accept my login credentials.Even if I were to do it now, I wouldn't notice, and even because I have to back up all the files, Irati get my old cell phone for this and format this one and try to do it. I hope to keep in touch with you, as you seem to be experienced Click to expand... Click to collapse Even a Poco F3 has a similar method, however instead of Qualcomm EDL Mode, it uses a similar but branded Xiaomi tool and within Fastboot Mode to flash the device. I'll be reading up on Stock flash methods for myself before I get to a stage where I unlock bootloader and root.
axialcecal said: Even a Poco F3 has a similar method, however instead of Qualcomm EDL Mode, it uses a similar but branded Xiaomi tool and within Fastboot Mode to flash the device. I'll be reading up on Stock flash methods for myself before I get to a stage where I unlock bootloader and root. Click to expand... Click to collapse I researched, I really saw that it is a tool for xiaomi, the same and for realme/oppo, can you give me a contact so we can talk better? like telegram?
Arkynne said: I researched, I really saw that it is a tool for xiaomi, the same and for realme/oppo, can you give me a contact so we can talk better? like telegram? Click to expand... Click to collapse Wouldn't be the same no, as Xiaomi's tool only supports a fastboot type package. PM Sent
Hi, I bought this phone 3 days ago (with no volte option) and Im also with BAIT. The thing I did is to download Vozapp, so far I can receive phone calls without any issue. When the phone stay along time without usage (like going bed) you may need to wake it up again (just double tap to wake the screen) so the app resume receiving calls.
makuaz said: ¡Buena tarde! ¡Saludos desde México! Hace unos dias compre un Realme GT Neo 2, actualmente vivo en Mexico y uso una empresa que se llama "Bait" de Altan Redes (que usa la banda 28), esta informacion me ayudara a explicar y comentar una duda que tengo Y NO PUEDO RESOLVER. Según el sitio web de Realme, mi teléfono es la versión "realme GT NeoFR (12+256)"; lo que supongo es de francia y por lo tanto una version de europa, hasta aqui todo bien no? View attachment 5537279 Pues no porque según las especificaciones del fabricante, este súper celular soporta VolTE y soporta banda 28; al insertar la sim que tengo en un OnePlus 5 de la empresa mexicana Bait con la esperanza de que se active el VolTE y pueda recibir llamadas o marcar, algo que durante 10 días probé de mil maneras y nunca pude activar dijo servicio, llame operado y me dijeron lo siguiente "Tu equipo no esta homologado para trabajar con nuestra red" pfffffff!!, y es curioso que en los ajustes no aparece dicha opcion de activacion. View attachment 5537291 View attachment 5537281 View attachment 5537283 View attachment 5537285 Como soluciono "a medias" este problema, ya que es dual sim, compro e ingreso otra sim "BAIT" con datos activados y uso mi anterior sim "BAIT", degradando la señal a 2g para que puedan entrar y salir llamadas . View attachment 5537289 Hasta el momento me gustaria saber si alguien tiene solucion a este problema o ha tenido el mismo problema que yo enfrento. Después de leer aquí en XDA hice lo siguiente: En primer lugar, el equipo venía con el firmware RMX3370_11_A.03; y al leer en detalle en el foro me di cuenta que si usamos VPN es probable que lance una actualización para poder desbloquear el bootloader y poder flashear el teléfono y cambiar de región (con este flasheo pensé que podría activar el volte o algunas funciones diferentes para poder usar mi teléfono con el operador "BAIT"). Para esta primera actualización utilicé la aplicación psiphon Pro y el país de Francia. View attachment 5537293 https://psiphon.ca/es/download.html Después de probar una vpn y mucha paciencia, el teléfono recibió por primera vez la actualización RMX3370_11_A.05. Después de unos días seguí intentando subir la versión del teléfono y simplemente con el vpn durante horas y conectado a WIFI no recibí nada, por eso pensé ¿y si cambio de país al usar el VPN? y bingo pude actualizar a la versión RMX3370_11_A.06 para este caso usé la misma aplicación pero usando el vpn del país de Bulgaria. Con esta actualización primero me fue posible desbloquear el booloader siguiendo en detalle el tutorial del hermano @RMX3370 (gracias por los tutoriales) https://forum.xda-developers.com/t/...2-rmx3370-all-variants.4391679/#post-86396489 Una vez que el cargador de arranque esté desbloqueado, instale TWRP y Magisk para rootear el teléfono; nuevamente siguiendo en detalle el tutorial del hermano @RMX3370 https://forum.xda-developers.com/t/rooting-realme-gt-neo-2-rmx3370-all-models-with-magisk.4392005/ Despues de este proceso y con el bootloader desbloqueado flashie y cambio de regiones por Europa, India Latam etc.... NADA NI NINGUNA version de firmware activaba el VolTE. Para flashear, siga en detalle el siguiente tutorial del hermano @SrCDA : https://forum.xda-developers.com/t/...ion-relockbootloader-realme-gt-neo-2.4399223/ Todo este proceso de desbloqueo, flasheo, instalación de firmware (cambios de región) de BooLoader se realizó bajo MacOS BigSur sin problemas; Por eso les digo que sigan todas las guías al detalle ya que veo que a veces preguntan muchas cosas recursivamente cuando los mismos autores de las guías las resuelven en las publicaciones. Después de intentar e intentar que funcione el VolTE me he resignado a quedarme en la región INDIA y ya estoy usando el teléfono para uso diario; solo que ahora hay otro problema EL LECTOR DE HUELLAS DACTILARES NO FUNCIONA, he intentado poner mis huellas dactilares y es realmente molesto desbloquearlo con un código; He desactivado la autenticación biométrica de magisk PERO NO HA SOLUCIONADO NADA. Cambié la aplicación de llamadas de Android para evitar el anuncio "Esta llamada se está grabando" y desinstalé las aplicaciones que ralentizan el teléfono para dejar la ROM original lo más limpia posible. Es un teléfono rápido, bien configurado y me gusta mucho; pero enumero mis problemas de nuevo: - No hay VolTE para la banda 28 de México - Problema con el temblor del lector de huellas dactilares al intentar agregarlas para desbloquear el teléfono. Nota: si algún usuario requiere que lo apoye en algo con todo gusto!; Si alguien puede preguntar por los problemas enumerados o se enfrentó a lo mismo y logró solucionarlos, ¡realmente agradecería algunos consejos para terminar de configurar mi teléfono! View attachment 5537299 Muchas gracias por leerme y por su amable atención, saludos desde México! Click to expand... Click to collapse H, también soy de México y sigo con la RMX3370_11_A.03 cuál es el proceso que seguiste, cuánto tiempo usaste la vpn..? Las he usado y no descarga nada... También quiero saber dónde checaste tu versión donde dice que es de Francia... H, I am also from Mexico and I continue with the RMX3370_11_A.03, what is the process you followed, how long did you use the vpn? I've used them and it doesn't download anything... I also want to know where you checked your version where it says it's from France...
Arkynne said: I understand, well I even thought about buying from Bangood, but I didn't have it in green, lol, apparently it's the right way, but MSM doesn't accept my login credentials.Even if I were to do it now, I wouldn't notice, and even because I have to back up all the files, Irati get my old cell phone for this and format this one and try to do it. I hope to keep in touch with you, as you seem to be experienced Click to expand... Click to collapse As far as I know MSM is paid brother, better use the tutorial described above since I currently managed to update (first Flashing to RMX3370_11_A.07 (Indian region) and I got the RMX3370_11_A.08 update
imR1ch said: Hi, I bought this phone 3 days ago (with no volte option) and Im also with BAIT. The thing I did is to download Vozapp, so far I can receive phone calls without any issue. When the phone stay along time without usage (like going bed) you may need to wake it up again (just double tap to wake the screen) so the app resume receiving calls. Click to expand... Click to collapse ok brother I understand, I don't use voice app better buy another bait sim and with that I have activated 4G and my main sim (also bait), what I was able to investigate with a friend who works at Altan Redes IS THAT THE VOLTE FOR CALLS WILL NEVER WORK ON THIS PHONE UNTIL REALME OR ANY MEXICAN TELEPHONE COMPANY SELL IT IN THEIR OFFICIAL STORES SO THAT THE TAXES ARE PAID AND IT CAN BE APPROVED
Gamas1. said: H, también soy de México y sigo con la RMX3370_11_A.03 cuál es el proceso que seguiste, cuánto tiempo usaste la vpn..? Las he usado y no descarga nada... También quiero saber dónde checaste tu versión donde dice que es de Francia... Click to expand... Click to collapse Hello brother, a pleasure! I recommend you try to flash it yourself to upload the firmware, when my phone arrived it had the same RMX3370_11_A.03 and it uploaded by itself without vpn or anything to RMX3370_11_A.05, from there I unlocked the bootloader and I was able to flash it by trying different regions, India, CN, Global etc...
makuaz said: ok brother I understand, I don't use voice app better buy another bait sim and with that I have activated 4G and my main sim (also bait), what I was able to investigate with a friend who works at Altan Redes IS THAT THE VOLTE FOR CALLS WILL NEVER WORK ON THIS PHONE UNTIL REALME OR ANY MEXICAN TELEPHONE COMPANY SELL IT IN THEIR OFFICIAL STORES SO THAT THE TAXES ARE PAID AND IT CAN BE APPROVED Click to expand... Click to collapse Well my I can do and receive calls at any moment, you should install it and give it try. VozApp