I'm trying this program out to get my phone profiles to change automatically (silent for work and wifi/bluetooth on at other times like when plugged in etc).
I have set up details for auto switching but the behaviour now of the profiles is a bit weird at times.
When I have an automatic switchover for instance from Home to Work (silent) profiles, I'm not certain if it's actually doing it or not.
What happened this morning for instance was that I got to work at 8.40 and checked my phone and it still had the speaker icon showing normally in the taskbar as if it was still set to 100% volume, BUT, when I pressed the volume rocker to set it silent, I found the volume bar was already fully down, suggesting it had actually changed the volume setting as required and presumably switched the profile, but simply not refreshed the speaker icon on the taskbar to show that the phone was now set as silent or vibrate.
Hope that makes sense!
On top of that, whilst it seems to work well to switch both wifi and bluetooth on when required, it doesn't always seem to turn wifi off again when it should. I'm fairly sure it's not just a case of profile settings causing it just to remain on because the profile it's gone back to still uses wifi after an auto switch.
Would love to keep this program but only if I have total confidence that my phone is not going to ring when it's meant to be silent etc, and it's a little misleading at the moment with the impression it sometimes gives about whether the phone is actually silent or not.
Anyone else have these issues, and any way I can correct this?
Cheers!
if you've gone in to setting-->profiles --> and click option --> automatic switching
then you are doing it right
also realise there are option for switch on/off bluetooth/wifi/radio etc when setting up your profile
also if you can't see the PhoneAlarm taskbar on your front screen, then that would mean its not install properly and therefore not working, hope that helps
have you been to the forums @ pocketmax.net? there is tons of information there, and plenty of help for questions such as this.
I have been using phoneAlarm with no problems whatsoever for years now...
oh, and by the way, your signature does not reflect what ROM you are using -- I have noticed on the more recent Energy ROMs of mine that the taskbar is sometimes "slow" to refresh. for instance, when unplugging usb/charger the battery icon does not change from the 'lightning bolt' back to percentage until a minute or so... (this could possibly be related to volume icon as well)
Thanks for the replies
No I've not looked on their forum I must admit. Will be worth checking out though.
I'm very interested in the comments about this slow refresh with the taskbar though as I think that must be the problem.
I had noticed the same thing with the charging 'lightning'' icon but had forgotten until you mentioned it.
I've added my rom info in signature - thanks for pointing that out.
Is there any cure for this behaviour with the taskbar other than swapping Roms?
I'm quite happy really with this one, unless someone wants to recommend a rom that's radically better and doesn't have this particular issue?
Plus the fact I could potentially go through loads of other roms til this is solved, or just be trading this bug for another one.
Would love to solve it though. This app is growing on me but if I have to double check each time it swaps a profile to make sure it's done it then it defeats the purpose of having it.
I realise at least that this may not actually be the fault of the app itself though.
Sports activity tracker
* ALPHA * state.
I'm looking forward for people to test and send suggestions.
Track your sports activities capturing
location
cadence
altitude
power
heart rate
speed
bearing
slope
etc...
Plot progress, lap time and other
Set targets and receive feedback while tracking your session
Works in landscape and portrait
Audio rithmic control.
Reproduce your music at modified tempo to match your cadence.
Enable metronome to help with cadence.
Download or import routes.
Routes export to GPX and KML
Google earth route export *Broken*
Check compass and GPS status
Integration of sensors and wearables
Heart rate and other BTLE sensors.
Miband
Ready to integrate more
Google fit integration
https://play.google.com/store/apps/details?id=com.tincore.and.gliderun
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IMPORTANT NOTES
The app will only discover wearables like MiBand if they are not used at the same time by another app like MiFit. You need to close MiFit for the band to be discovered.
In the case of the MiBand when you change the app your band stored data will be wiped. I'm investigating a way to avoid this.
What does it do..?
First message updated a bit
How to connect with mi band? I search for devices but it find nothing
Edit: just figured it out
I have a question. After connected to my miband I tapped on the top left settings icon and I saw in the bottom of the list the option "factory reset". Is it really possible? What are the consequences? In the official app this option doesn't exist
Sent with my Nexus 5 through time and space
giorgis91 said:
How to connect with mi band? I search for devices but it find nothing
Edit: just figured it out
I have a question. After connected to my miband I tapped on the top left settings icon and I saw in the bottom of the list the option "factory reset". Is it really possible? What are the consequences? In the official app this option doesn't exist
Sent with my Nexus 5 through time and space
Click to expand...
Click to collapse
To connect the MiBand you unpaired it first from the other app havent you?
The Admin section of wearables exposes all kind of operations. Some of them are rather low level and even should be executed on a particular order. I may hide/show all that under a setting to avoid mistakes.
Factory reset just does that. It will wipe all the pairing data.
tincore said:
To connect the MiBand you unpaired it first from the other app havent you?
The Admin section of wearables exposes all kind of operations. Some of them are rather low level and even should be executed on a particular order. I may hide/show all that under a setting to avoid mistakes.
Factory reset just does that. It will wipe all the pairing data.
Click to expand...
Click to collapse
Thank you for answering quickly I ask that because lot of people on an Italian forum that I know had many problems with this wereable and I thought that a factory reset could solve them.
Another question: after using you're app I noticed that after reconnecting the mi band to its official app all the data was lost. Is it normal?
Sent with my Nexus 5 through time and space
giorgis91 said:
Thank you for answering quickly I ask that because lot of people on an Italian forum that I know had many problems with this wereable and I thought that a factory reset could solve them.
Another question: after using you're app I noticed that after reconnecting the mi band to its official app all the data was lost. Is it normal?
Sent with my Nexus 5 through time and space
Click to expand...
Click to collapse
About the data wipe. This is normal the app is setting new user data based on the personal profile.
Same with the alarms. The band, as far as I know, does not have a way to retrieve the current alarm configuration.
Thanks for the app. I think it very promising. I just installed the app from google play, unpaired the band with mi fit app and connected with gliderun. After connection, it stays short time as connected and disconnects after 4-5 seconds. Is there a reason you can tell? I use smartlock app and I am on cm11.
Thanks again.
saltinbas said:
Thanks for the app. I think it very promising. I just installed the app from google play, unpaired the band with mi fit app and connected with gliderun. After connection, it stays short time as connected and disconnects after 4-5 seconds. Is there a reason you can tell? I use smartlock app and I am on cm11.
Thanks again.
Click to expand...
Click to collapse
Sorry for not answering before. Is it working better now. There have been a good number of versions.
Hey, tincore. Thank you for making the app compatible with the Mi Band! Since there's a lack of feedback here for you, I'd like to leave you some general issues/thoughts/etc. If you'd like to inquire about any of my comments, or would like logs of anything, please let me know and I'll provide that. If you wouldn't mind just quoting some of my comment so I can get an e-mail notification of your reply, that'd be great!
I'm on Android 4.4.4.
- Initially, I had trouble pairing the Mi Band with the app. I unpaired my band from MiFit, killed MiFit, and attempted pairing to Gliderun. Initially, Gliderun would connect to the band, this is where band's lights light up, and you have to tap the band to 'accept' the pairing; but when you tapped the band nothing happened. However, a minute later the band connected to Gliderun as if I tapped it.
- When I connected to Gliderun, it recognized that I had 6,000 steps, but once I began walking, the app started counting from 0.
- I'm kind of confused about the 'start' function on the Activity tab. Am I supposed to have this enabled? Normally, I just go into MiFit, refresh the page for it to download the data from the band. Can I essentially do this with Gliderun without using this start function?
- On the Activity tab, is there a way to make 'empty' cells completely blank?
- Is there a way to track sleep?
Previously, I had trouble getting my MiBand to reliably stay connected with Gliderun, but now it seems to keep the connection fine. I'll start using this app daily instead and I'll check back here with any updates. Thanks again!
Thanks for the remarks!
After the band is paired once the app tries to find and reconnect to it automatically. I imagine that first time there was a problem with the connection so it connected on the retry . It *should* also syncronize itself every 1-2 hours..
About step count and the start button. Gliderun tries to combine activity and general tracking. When you start a particular activity (by clicking on start) it should count the steps of that activity. When you are not in a activity it should count those steps globally for a daily total.
To activate global tracking you can go to preferences > tracking or tap on some of the inactive dashboard indicators. Without global tracking activated you should still see some totals after syncronization with the band.
You have,at least, two steps counters the band and your phone. Each of them has an absolute step count.
"Sensor step counts" indicator shows the steps of the active step counter so depending on the band being connected or not it may toggle to your phone. I hope this makes sense.
I will add a "Blank" indicator asap.
About sleep. The app should be already tracking your sleep periods. You can see those on Global stats screen. I would like to add the deep sleep phases but I need documentation or advise on what exactly I have to look for in order to provide a faithful solution.
I'm trying now to fix a few issues to move to beta. I hope I can make a video and some captures soon.
adobrakic said:
Hey, tincore. Thank you for making the app compatible with the Mi Band! Since there's a lack of feedback here for you, I'd like to leave you some general issues/thoughts/etc. If you'd like to inquire about any of my comments, or would like logs of anything, please let me know and I'll provide that. If you wouldn't mind just quoting some of my comment so I can get an e-mail notification of your reply, that'd be great!
I'm on Android 4.4.4.
- Initially, I had trouble pairing the Mi Band with the app. I unpaired my band from MiFit, killed MiFit, and attempted pairing to Gliderun. Initially, Gliderun would connect to the band, this is where band's lights light up, and you have to tap the band to 'accept' the pairing; but when you tapped the band nothing happened. However, a minute later the band connected to Gliderun as if I tapped it.
- When I connected to Gliderun, it recognized that I had 6,000 steps, but once I began walking, the app started counting from 0.
- I'm kind of confused about the 'start' function on the Activity tab. Am I supposed to have this enabled? Normally, I just go into MiFit, refresh the page for it to download the data from the band. Can I essentially do this with Gliderun without using this start function?
- On the Activity tab, is there a way to make 'empty' cells completely blank?
- Is there a way to track sleep?
Previously, I had trouble getting my MiBand to reliably stay connected with Gliderun, but now it seems to keep the connection fine. I'll start using this app daily instead and I'll check back here with any updates. Thanks again!
Click to expand...
Click to collapse
tincore said:
Thanks for the remarks!
After the band is paired once the app tries to find and reconnect to it automatically. I imagine that first time there was a problem with the connection so it connected on the retry . It *should* also syncronize itself every 1-2 hours..
Click to expand...
Click to collapse
Yup! After wanting to view my current steps for today, I just opened up Gliderun, waited a bit, and it connected to my MiBand after a couple of minutes. I have to close Gliderun in the meantime because my phone is relatively old (HTC One S -- 2, 3 years?) so I can't have the app running all the time.
About step count and the start button. Gliderun tries to combine activity and general tracking. When you start a particular activity (by clicking on start) it should count the steps of that activity. When you are not in a activity it should count those steps globally for a daily total.
Click to expand...
Click to collapse
Ohh, I see, that makes a lot of sense! I'm a student for the majority of my day and don't really have any separate 'activities', so I didn't see the inherent benefit of activity mode, but that does make sense.
To activate global tracking you can go to preferences > tracking or tap on some of the inactive dashboard indicators. Without global tracking activated you should still see some totals after syncronization with the band.
Click to expand...
Click to collapse
Ahh, I apologize about that, I completely neglected this tab. I figured the Activity tab was more important simply because of its location. This actually looks more like how I was hoping the app would function.
About sleep. The app should be already tracking your sleep periods. You can see those on Global stats screen. I would like to add the deep sleep phases but I need documentation or advise on what exactly I have to look for in order to provide a faithful solution.
Click to expand...
Click to collapse
Thank you! Again, if there are any logs I can provide that would help, please let me know and I will certainly do so.
--edit--
I'm having an issue where the app doesn't seem to be updating the Global Stats tab. On the Activity tab, my total steps have been counted properly, but when I go to Global Stats, it only shows information from the previous time I synced (about 8 hours ago). I killed the app, re-connected, and re-synced, and the same thing happened.
--edit #2--
After messing around with the Global Stats tab, and switching views (24 hours/day/week), the app resynced on its own (not sure if it was a coincidence or from me switching views), and now the Global Stats tab has updated; but now it has slightly more steps than the Activity tab.
Not a big deal at all, but I figured you'd like to know!
I just found your app. It looks very promising.
Where would you prefer to have me send the feedback.
I understood there was also a Reddit thread somewhere - I could not find it.
Thanks
maishsk said:
I just found your app. It looks very promising.
Where would you prefer to have me send the feedback.
I understood there was also a Reddit thread somewhere - I could not find it.
Thanks
Click to expand...
Click to collapse
If you want you can send me an email. If it something more general or open to discussion by other people feel free to post it here.
That Reddit thread is not getting any rythm.
I had a Mi Band and used the MiFit app for the last couple months, but I lost the device. I've ordered a new one and I'm going to start using Gliderun mostly because of the Google Fit integration. While I'm waiting for my package I've been messing around with your app and trying to figure some things out so I'll be ready to go when my new band arrives. Here's some feedback:
The headphone icon opens up the music controls and the audio notifications; music controls/library only works with music stored on the phone, is there any way to integrate this with Google Music? There's only a couple of apps that I've seen do this (specifically GMusicFS), but it would be nice.
On the user screen: for any user input requiring a number (weight, height, goals, etc.) you have a scrolling number which is nice from a UI perspective, but when I have to enter any of these values for the first time, scrolling is very tedious. This is particularly brutal when I'm trying to set up a goal for the first time, I have to scroll all the way from 0 to 8,000. There should be a way to manually input a number using an on-screen keyboard as well. It also looks like the goal is limited to 20,000 steps, theoretically this should be unlimited.
User profile: I have my units set to imperial. When inputting my height for the major intervals you might want to make the height max out at 7-ft just in case. For the minor intervals, you should put the unit next to the number (inches) and I would limit the user to discrete numbers 1 through 12. I'm not sure how you're calculating height, but the way you have it set up it is very hard for a user to input their height in imperial units. For example: I am 6-ft 2-inches, in order to input my height I have to calculate how many hundredths of a foot 2-inches is. So in my case 2/12=.16666. The average person isn't going to do this and is going to give up when you can't just enter 6-ft 2-inches.
The compass UI needs a little work, it isn't quickly evident where north is. I would prefer a more traditional looking compass (maybe something similar to this). Also, for some reason my altitude is always blank.
Synchronize: I have the first three options enabled for Google Fit integration. The app always says disconnected, when I press the synchronize button it changes to connected, but I don't think anything is actually being synced. There should be some sort of progress bar when synchronizing with Google Fit so the user knows it's actually working. In my case I don't think it's working at all. I've enabled the option to download tracked activities from GFit, but nothing ever shows up in the stats.
In the settings, General: I would make an expert section to the settings menu that has to be manually activated and move Optimize track points and Recalculate calories there. Also for any option where you could be deleting or modifying data (everything under the "Other" section) I would have a confirmation dialog box pop up. That way if somebody accidentally presses one of those options they don't completely wipe out all there data.
In the settings, Audio: I would either explain the difference between Audio engine A and B or give the user an option to play example audio. Similar to how you have the option to "Listen to an example" of text-to-speech output in the main android settings.
In the settings, Notification: I think there needs to be a little more configuration for notifications. I really like the way the Notification version of the MiFit app allowed you to set the colors for the LEDs on the Mi Band as well as the number of times it vibrated and the number of times the LED blinked. I know this is a beta version, but I think a little more work needs to be done in this particular area if you want users to switch from the MiFit app. Being able to tell what app I'm getting a notification from just by looking at the band is extremely useful and it's going to make switching hard without it. I don't want to say you should copy the Notification settings screen from the MiFit app, but it has been implemented very well.
Settings: somewhere you need to provide Help information. For most of the options I'm not sure exactly what they're supposed to do, maybe have a ?-button next to the option that the user can press that will pop up a longer description of exactly what the option does.
Any thoughts on providing a dark theme as well? Just something simple where you change the background to black and the text to white, the green color should look good with both a dark and light background.
I saw you have sleep tracking on the list of things to improve upon, really looking forward to that. The MiFit app and Sleep as Android app provide a very clean UI for visualizing your sleep. I would try to implement something similar. I'm sure you've seen it, but this thread might have some hints on how to better pull the sleep data from the MiBand.
I know I wrote a lot, but you have done great work with this app in the short amount of time you've been developing it. I can't wait to see how this app progresses because I think you've got a really good app here. The design looks very good and polished it just needs a few tweaks here and there. Once I get my new Mi Band I'll provide some more feedback.
Keep up the great work. If you want to discuss any of this more I would be more than happy to do so.
Thanks for all that feedback! I add everything to my list. Will tackle the more important stuff first.
About audio.
I may eventually add a fallback into system players. The player provides a rythm guidance for your exercise by adjusting the playback rate to your desired cadence so it is rather specific. it is custom built.
About scrolling. If you tap you do not need to scroll. You can enter the number directly. This is NumberPicker standard. I may have missed one or two fields though.
I will increase the daily goals to something in the ultramarathon range.
About imperial input. You are absolutely right. Will change it soon..
I will see what I can do with the compass. It is all a matter of priorities.
Altitude comes from GPS.
GFit issue is a glitch too. Click sync again. I'm now focusing more on FitnessSyncer as it is much more powerful.
Sleep tracking is working. You can see it on Daily Stats. It may need some tweaking though. The band does not really export sleep data so I had to write the algorithms myself and I've already noticed a couple of issues.
Also the custom notifications is a great idea. I have to fit that into a general API. The app is meant to integrate other bands. Just need to get some samples.
Devo7v said:
I had a Mi Band and used the MiFit app for the last couple months, but I lost the device. I've ordered a new one and I'm going to start using Gliderun mostly because of the Google Fit integration. While I'm waiting for my package I've been messing around with your app and trying to figure some things out so I'll be ready to go when my new band arrives. Here's some feedback:
The headphone icon opens up the music controls and the audio notifications; music controls/library only works with music stored on the phone, is there any way to integrate this with Google Music? There's only a couple of apps that I've seen do this (specifically GMusicFS), but it would be nice.
On the user screen: for any user input requiring a number (weight, height, goals, etc.) you have a scrolling number which is nice from a UI perspective, but when I have to enter any of these values for the first time, scrolling is very tedious. This is particularly brutal when I'm trying to set up a goal for the first time, I have to scroll all the way from 0 to 8,000. There should be a way to manually input a number using an on-screen keyboard as well. It also looks like the goal is limited to 20,000 steps, theoretically this should be unlimited.
User profile: I have my units set to imperial. When inputting my height for the major intervals you might want to make the height max out at 7-ft just in case. For the minor intervals, you should put the unit next to the number (inches) and I would limit the user to discrete numbers 1 through 12. I'm not sure how you're calculating height, but the way you have it set up it is very hard for a user to input their height in imperial units. For example: I am 6-ft 2-inches, in order to input my height I have to calculate how many hundredths of a foot 2-inches is. So in my case 2/12=.16666. The average person isn't going to do this and is going to give up when you can't just enter 6-ft 2-inches.
The compass UI needs a little work, it isn't quickly evident where north is. I would prefer a more traditional looking compass (maybe something similar to this). Also, for some reason my altitude is always blank.
Synchronize: I have the first three options enabled for Google Fit integration. The app always says disconnected, when I press the synchronize button it changes to connected, but I don't think anything is actually being synced. There should be some sort of progress bar when synchronizing with Google Fit so the user knows it's actually working. In my case I don't think it's working at all. I've enabled the option to download tracked activities from GFit, but nothing ever shows up in the stats.
In the settings, General: I would make an expert section to the settings menu that has to be manually activated and move Optimize track points and Recalculate calories there. Also for any option where you could be deleting or modifying data (everything under the "Other" section) I would have a confirmation dialog box pop up. That way if somebody accidentally presses one of those options they don't completely wipe out all there data.
In the settings, Audio: I would either explain the difference between Audio engine A and B or give the user an option to play example audio. Similar to how you have the option to "Listen to an example" of text-to-speech output in the main android settings.
In the settings, Notification: I think there needs to be a little more configuration for notifications. I really like the way the Notification version of the MiFit app allowed you to set the colors for the LEDs on the Mi Band as well as the number of times it vibrated and the number of times the LED blinked. I know this is a beta version, but I think a little more work needs to be done in this particular area if you want users to switch from the MiFit app. Being able to tell what app I'm getting a notification from just by looking at the band is extremely useful and it's going to make switching hard without it. I don't want to say you should copy the Notification settings screen from the MiFit app, but it has been implemented very well.
Settings: somewhere you need to provide Help information. For most of the options I'm not sure exactly what they're supposed to do, maybe have a ?-button next to the option that the user can press that will pop up a longer description of exactly what the option does.
Any thoughts on providing a dark theme as well? Just something simple where you change the background to black and the text to white, the green color should look good with both a dark and light background.
I saw you have sleep tracking on the list of things to improve upon, really looking forward to that. The MiFit app and Sleep as Android app provide a very clean UI for visualizing your sleep. I would try to implement something similar. I'm sure you've seen it, but this thread might have some hints on how to better pull the sleep data from the MiBand.
I know I wrote a lot, but you have done great work with this app in the short amount of time you've been developing it. I can't wait to see how this app progresses because I think you've got a really good app here. The design looks very good and polished it just needs a few tweaks here and there. Once I get my new Mi Band I'll provide some more feedback.
Keep up the great work. If you want to discuss any of this more I would be more than happy to do so.
Click to expand...
Click to collapse
Thanks for reading through my comments:
tincore said:
About audio.
I may eventually add a fallback into system players. The player provides a rythm guidance for your exercise by adjusting the playback rate to your desired cadence so it is rather specific. it is custom built.
Click to expand...
Click to collapse
The current implementation is good, it was more of a wish list item.
tincore said:
About scrolling. If you tap you do not need to scroll. You can enter the number directly. This is NumberPicker standard. I may have missed one or two fields though.
Click to expand...
Click to collapse
You're right I don't know how I missed that, apparently I've been using Android wrong this whole time.
tincore said:
I will increase the daily goals to something in the ultramarathon range.
Click to expand...
Click to collapse
I honestly would remove scrolling completely from the goals and just leave it as user input. I don't know if scrolling is very useful when we're talking about differences in thousands of steps.
tincore said:
About imperial input. You are absolutely right. Will change it soon..
Click to expand...
Click to collapse
Thanks
tincore said:
I will see what I can do with the compass. It is all a matter of priorities.
Click to expand...
Click to collapse
I don't see this as a priority, it was just a suggestion. Feel free to put this at the bottom of your list.
tincore said:
Altitude comes from GPS.
Click to expand...
Click to collapse
Apparently I was just in a bad location at the time. However it is reporting a different altitude than GPS Test. Gliderun shows me at an altitude of 119ft whereas GPS Test shows me at an altitude of 233 ft so I'm not sure what is going on. Is there some sort of log I can provide?
tincore said:
GFit issue is a glitch too. Click sync again. I'm now focusing more on FitnessSyncer as it is much more powerful.
Click to expand...
Click to collapse
I don't personally use FitnessSyncer, but I'm sure there are a lot of people who do. Looking forward to GFit integration. One quick question: once GFit is fully integrated, will I be able to sync all the data I collect with Gliderun or is there a limit on how far back I can go? Likewise will I be able to import all of my past GFit data into Gliderun?
tincore said:
Sleep tracking is working. You can see it on Daily Stats. It may need some tweaking though. The band does not really export sleep data so I had to write the algorithms myself and I've already noticed a couple of issues.
Click to expand...
Click to collapse
As I mentioned, I don't have my new Mi Band yet so I can't test sleep tracking yet. When I get it, I'll give you some more detailed thoughts on it.
tincore said:
Also the custom notifications is a great idea. I have to fit that into a general API. The app is meant to integrate other bands. Just need to get some samples.
Click to expand...
Click to collapse
The detailed control over notifications is the one thing I'm going to miss the most from the MiFit app. Hopefully it's not too much trouble to add these controls. The only thing I can think of to figure out how to add these controls would be to decompile the Notification version of the MiFit app or see if the api calls on this website are useful.
The more we talk and the more I mess around with the app the more I'm liking it.
Thanks again for all the valuable input!
Devo7v said:
Thanks for reading through my comments:
Click to expand...
Click to collapse
You are not the first one having trouble with the NumberPickers. I think they are not very well designed. I do not find the field edition intuitive either. Most of the time I forget to click accept so I lose the edition. Maybe I'm doing something wrong.
Devo7v said:
I honestly would remove scrolling completely from the goals and just leave it as user input. I don't know if scrolling is very useful when we're talking about differences in thousands of steps.
Click to expand...
Click to collapse
Yes. The plan is at least to space them in 100 or 250 units
Devo7v said:
Apparently I was just in a bad location at the time. However it is reporting a different altitude than GPS Test. Gliderun shows me at an altitude of 119ft whereas GPS Test shows me at an altitude of 233 ft so I'm not sure what is going on. Is there some sort of log I can provide?
Click to expand...
Click to collapse
At the moment I'm just showing the Altitude reported by GPS and I think that it has to be corrected by a complex calculation that can be retrieved from a webservice. That may be the issue.
Devo7v said:
I don't personally use FitnessSyncer, but I'm sure there are a lot of people who do. Looking forward to GFit integration. One quick question: once GFit is fully integrated, will I be able to sync all the data I collect with Gliderun or is there a limit on how far back I can go? Likewise will I be able to import all of my past GFit data into Gliderun?
Click to expand...
Click to collapse
Last time I tried it I could upload and download all gliderun data. I found GFit rather odd. Up to now it is unclear to me when it really uploads the data to the servers making it is visible from the web or other device. Also you do not retrieve exactly what you save.
Devo7v said:
As I mentioned, I don't have my new Mi Band yet so I can't test sleep tracking yet. When I get it, I'll give you some more detailed thoughts on it.
Click to expand...
Click to collapse
Sleep periods seem rather accurate. Still I have to do something to detect short sleep interruptions. Phases analysis is there too although I think that it has to be taken with a pich of salt. (Not only in this app)
Devo7v said:
The detailed control over notifications is the one thing I'm going to miss the most from the MiFit app. Hopefully it's not too much trouble to add these controls. The only thing I can think of to figure out how to add these controls would be to
Click to expand...
Click to collapse
It is no real trouble. I will add that rather soon (I hope)..
Hey Tincore
I think you have done some really great work on the app .. but when I tried to use it yesterday I got a bit confused (maybe you can help me out here).
I couldn't actually see where my step count was being shown. I was assuming it would be on the activity screen but it just didn't seem to update. Is there a way to force a refresh of the count? The only time the app seemed to update was when I reconnected my miband.
The update to fitnesssyncer worked well .. is there anyway to have it automatically sync (either time period or when you open the app possibly)?
I found a spelling mistake as well Where you add your weight and waist, chest, hip sizes there is a "thight" measurement (im guessing its meant to be thigh).
Thanks for your hard work!
As in the title. Is this possible to do on Android head unit.
As we know we have various different physical button options and ways to link steering buttons to different apps. But as far as I know there isnt a way to shuffle running apps to bring them to the front or in focus with just 1 simple button (steering).
As we know using our phones we can press the left list button on our phones and scroll through recent apps and select the one we want to use to bring it back into focus. Well I generally have less than half a dozen main apps I might use any one time in the car and its a bit of a faff doing this with the screen. Id rather do it with just any easy dedicated button. And possibly assign the apps I want to switch between such as navi, radio, music, phone etc.
So can this be done ?
Its already done. I got a pumpkin px5 that has a mod button where in hal9k rom i set any numbers of apps i want and i scroll with that perfectly. Also i had assign for it a steering wheel button that works also fine.
I highly recommend the Hal9k rom as well. It does exactly what you want.
If you don't want to flash a new rom though I did this originally by using an app called MTCD Tools. I don't have a link but it's mentioned a lot in here.
I ended up using a combination of that and Tasker to get apps like Spotify or Pocketcasts to start playback automatically at different volume levels when cycled to.
But again, much less effort with Hal9k
Thanks guys, i thought perhaps mtcdtools might do it. But it is a bit scary as i dont understand most of it.
Good to no its possible tho. The more I think about it the more I like the idea.
Ive only just installed malaysk's rom which is very good + all my other apps so dont really want to wipe n flash again just yet. Did you also use Malaysk rom or go straight to Hal9k. I thought they were much the same.
I did install at 1st malaysk but it was too altered for my taste because i like just root and some extra options and hal9k rom fit the bill perfectly.
You sure malaysk doesn't have this option? Better ask in malaysk thread if you don't find it.
Yes I could do. Where did you find it in Hal9ks rom. Is it under settings?
Yes
Settings -> mod settings-> apps that cycle throw mode button.
If i remember right the last setting
Hi,
I just bought a joying UIS7862, 6GB+128GB,10.1" 1920x1200 head unit. I am not sure what type this unit is, is it a TS10?
The problem is that in third party applications everything is very small, small fonts, small details. This applies to apps like tidal, google maps, chrome etc. It is basically impossible to use these apps comfortably.
There is no "font size" or "display size" option in the device settings.
I solved the problem by changing the "smallest width" setting in the developer options from 1200 to 700. The apps look good now. the built-in apps also look good, except for the EQ app and the built-in launcher.
The launcher is not displayed at all, however, this problem can be easily solved by installing another launcher such as car web guru, which works great.
The real problem is with the EQ application which does not scale well. Some controls are out of screen, others are displayed incorrectly.
Is there an alternative application that supports dsp functions (dsp version of this device is dsp55) and will be displayed correctly?
Maybe someone has another way to solve the problem I described.
Marek.
I've done the same change on my 11.6 version. Did you do a full system reboot after changing the dpi setting? I had the same issue until I did a full reboot, then the system apps changed to the appropriate dpi scaling. You may want to change the dpi in small increments as well until everything looks correct.
WestonWW said:
I've done the same change on my 11.6 version. Did you do a full system reboot after changing the dpi setting? I had the same issue until I did a full reboot, then the system apps changed to the appropriate dpi scaling. You may want to change the dpi in small increments as well until everything looks correct.
Click to expand...
Click to collapse
What do you mean by 'full reboot"? All other system aps scale well, only eq app doesn't.
Just the Reboot from the top drop down menu. I guess I had not noticed if the EQ app was significantly larger in scale after the dpi change.
You missed the FYT forum listing your device....
Yet another.
Requested mod moves to FYT.
marchnz said:
You missed the FYT forum listing your device....
Click to expand...
Click to collapse
Sorry, I was not aware that my device is FYT. I am new to this...
WestonWW said:
Just the Reboot from the top drop down menu. I guess I had not noticed if the EQ app was significantly larger in scale after the dpi change.
Click to expand...
Click to collapse
I think I did it before, but to be sure I did a reboot today few times. It didn't help.
This happened on my 10 inch joying (airmont sc9853i). I hated it so much. Here's what I did. Should work for you.
Enable ADB by.... (or using Termux app)
- going to settings > system > developer options > 3368 > confirm
- at the top of the screen on right, tap three dots overflow menu icon > USB computer connection > pick the 2nd one (usually the one not selected on restarts)
- under where it says developer option, inline where it says "On", make sure that toggle switch is "ON"
- scroll down to, USB debugging, enable
Find the OTG port on the back of your unit. plug in a laptop with adb installed properly so you can 'adb shell'
From that shell, type enter the command 'wm' to being up its help.
what you are looking for is the correct "wm overscan [LEFT,TOP,RIGHT,BOTTOM]"
"wm overscan 10,0,0,0" worked great for me
dont worry about any white bars, they will go away after the screen redraws (switch apps or something)
I never adjusted any fonts or dpi in the system
hths
Thank you. And what about smallest width setting? Should it go back to 1200 as it was originally?
yegolebi said:
Thank you. And what about smallest width setting? Should it go back to 1200 as it was originally?
Click to expand...
Click to collapse
Yea. See if it makes any weird apps better. If not, leave it.
It turned out that the overscan setting didn't solve my problem, however Your answer pointed me in right direction. Thank you.
What was that right direction, post what you learnt so others may prosper
I mean that I started to experiment with adb and wm command, which I was not aware of before. Then I had the idea that I will use tasker to change DPI each time the eq app started and change it back on the exit. But this didn't work. Tasker can not change DPI in my case. I get error 1 message. So when I want to use this app I manually change DPI. The truth is I don't mess much with those settings once I've sett it to my liking....
WestonWW said:
I've done the same change on my 11.6 version. Did you do a full system reboot after changing the dpi setting? I had the same issue until I did a full reboot, then the system apps changed to the appropriate dpi scaling. You may want to change the dpi in small increments as well until everything looks correct.
Click to expand...
Click to collapse
Hi may I know what do you changed to ? I
I believe I set it to 720p (1280x720), common resolutions seem to work the best. I've since exchanged this unit for the new 11.6 slim so I can't say for sure.
Three questions in this one.
1. In my config.txt there is an entry:
ro.fyt.splitscreen=0
Can anyone confirm what it does? I have attempted value of 1 and 2 (assumed it may not have been binary) but there is no result. I was hoping that it would force a split screen to stay a split screen when awakening. I have looked in the skipkillapp.prop but didn't see anything particularly relevant.
2. Continuing on from question 1, I have attempted to use Macrodroid to create a split screen which worked under Macrodroid test conditions but I cannot find a trigger that will run the macro in real life scenarios. I have attempted triggers of power on, screen on, wake from sleep, charging on and a few others. I have my Headunit set to sleep in factory settings. I could probably get the trigger to piggyback off my bluetooth connection to my phone but I would like something more instant. Does anyone have success in getting Marcodroid to trigger from a head unit screen on / wake up when the car powers up?
3. In the config.ini there are mic vol and mic level. What is their role in that file? They don't seem to overwrite the config.txt values for mic as changes in config.txt for mic change mic response. There is also reference to GOC-Android in Config.ini... Any ideas?
ludditefornow said:
Three questions in this one.
1. In my config.txt there is an entry:
ro.fyt.splitscreen=0
Can anyone confirm what it does? I have attempted value of 1 and 2 (assumed it may not have been binary) but there is no result. I was hoping that it would force a split screen to stay a split screen when awakening. I have looked in the skipkillapp.prop but didn't see anything particularly relevant.
2. Continuing on from question 1, I have attempted to use Macrodroid to create a split screen which worked under Macrodroid test conditions but I cannot find a trigger that will run the macro in real life scenarios. I have attempted triggers of power on, screen on, wake from sleep, charging on and a few others. I have my Headunit set to sleep in factory settings. I could probably get the trigger to piggyback off my bluetooth connection to my phone but I would like something more instant. Does anyone have success in getting Marcodroid to trigger from a head unit screen on / wake up when the car powers up?
3. In the config.ini there are mic vol and mic level. What is their role in that file? They don't seem to overwrite the config.txt values for mic as changes in config.txt for mic change mic response. There is also reference to GOC-Android in Config.ini... Any ideas?
Click to expand...
Click to collapse
For 1): Sorry to give a non-helping answer here, but I don't know either. I wondered about that one myself and also searched 4pda extensively, but can't find anything.
2) This will not work. As of Android 10 apps are not allowed to do a split-screen, only the user him/herself. It is a new security feature. (And then adding to 1): Maybe the ro.fyt.splitscreen still worked on the sc9853i Android 8.1 versions. I will get my device back on power on the bench.)
3) config.ini? Which config.ini? I searched the latest Joying and Mekede firmware and can't find a config.ini.
surfer63 said:
For 1): Sorry to give a non-helping answer here, but I don't know either. I wondered about that one myself and also searched 4pda extensively, but can't find anything.
2) This will not work. As of Android 10 apps are not allowed to do a split-screen, only the user him/herself. It is a new security feature. (And then adding to 1): Maybe the ro.fyt.splitscreen still worked on the sc9853i Android 8.1 versions. I will get my device back on power on the bench.)
3) config.ini? Which config.ini? I searched the latest Joying and Mekede firmware and can't find a config.ini.
Click to expand...
Click to collapse
1. You were helpful. You confirmed to me that the info is not easily obtainable. I've several hours that I have spent today looking for this and learning other things andf made a list of items where I need to learn and research more. This item will now go further down the list. So thank you.
2. It does work already when I trigger from within Macrodroid. The issue is that I can't find an auto trigger in macrodroid what works when I turn on a screen. For a moment forget that I want split screen. I just want Macrodroid to dop *something* when the screen comes on when I start the car.
I can't find what turning on the head unit triggers in macrodroid. Something must happen in the head unit OS that macrodroid can see, I would have thought.
3. I think I have answered this one already. Theshortcut was found in oem/apps. The config seems to be denoting what server or service it should look for for certain info. I have translated the chinese text and it makes sense now.
Attached is the config.ini with chinese characters and then below the end is the translated to english.
I'll put this here more for a reference for me.
thanks for replying.
ludditefornow said:
3. I think I have answered this one already. Theshortcut was found in oem/apps. The config seems to be denoting what server or service it should look for for certain info. I have translated the chinese text and it makes sense now.
Attached is the config.ini with chinese characters and then below the end is the translated to english.
I'll put this here more for a reference for me.
thanks for replying.
Click to expand...
Click to collapse
Thanks.
It must be created or copied somehow at the moment of flashing, or first boot or maybe on every boot. I can't find it in any of the partitions in the firmware.
When I look in the firmware system.img (system.new.dat.br) it is a symlink to "config.ini -> /oem/config.ini", but the oem is freshly created on flashing and than "filled" with the AllAppUpdate.bin apps.