I have made and decided to share a TWRP flashable Project Spectrum zip that includes TWRP-.3.1.1-0 for spectrum. It is a full spectum rom including bootloader, firmware and TWRP recovery. It can be flashed from either ColorOs TWRP or Spectrum TWRP.
Install Instructions
- Do a full wipe first or the install will fail. (In TWRP hit WIPE then swipe to factory reset.) Do a backup first as you will lose data.
- Flash this zip file through twrp and then hit "wipe dalvic and cache", then hit HOME then REBOOT then RECOVERY. (rebooting to the new recovery will ensure the recovery sticks) then Flash any mods you want (eg. supersu ,magisk, exposed etc) and reboot to system. Enjoy
Return to ColorOs based ROM Instructions (ColorOS Bootloader,firmware and twrp)
- Do a full wipe first or the install will fail. (In TWRP hit WIPE then swipe to factory reset.) Do a backup first as you will lose data.
- Flash this zip file through twrp and then hit "wipe dalvic and cache", then hit HOME then REBOOT then RECOVERY. (rebooting to the new recovery will ensure the recovery sticks) then Flash any TWRP flashable ColorOs based rom or restore any ColorOs based backup. NOTE the Spectum system and boot.img will still be there but wont boot so you MUST flash or restore a ColorOs based rom before you reboot to system.
Reserved.
MiniBlu said:
Reserved.
Click to expand...
Click to collapse
Can I flash this twrp from twrp 3.1.1-0 on coloros ?
Phucan2017 said:
Can I flash this twrp from twrp 3.1.1-0 on coloros ?
Click to expand...
Click to collapse
Yep.... annoying?
You just ask questions instead of reading the post....
Have some compassion
Phucan2017 said:
Can I flash this twrp from twrp 3.1.1-0 on coloros ?
Click to expand...
Click to collapse
Yes, but it is a full ROM, including bootloader, all firmware and twrp. Did you read the OP. It says all of this in the description. Make sure you follow ALL the instructions and do the wipes or it will fail. I will be adding more zips to return to ColorOs soon.
khannz7 said:
Yep.... annoying
You just ask questions instead of reading the post....
Have some compassion
Click to expand...
Click to collapse
Yes. I'm sorry
---------- Post added at 01:17 PM ---------- Previous post was at 01:07 PM ----------
MiniBlu said:
Yes, but it is a full ROM, including bootloader, all firmware and twrp. Did you read the OP. It says all of this in the description. Make sure you follow ALL the instructions and do the wipes or it will fail. I will be adding more zips to return to ColorOs soon.
Click to expand...
Click to collapse
Can't restore coloros if backup?
MiniBlu said:
Yes, but it is a full ROM, including bootloader, all firmware and twrp. Did you read the OP. It says all of this in the description. Make sure you follow ALL the instructions and do the wipes or it will fail. I will be adding more zips to return to ColorOs soon.
Click to expand...
Click to collapse
What about the port you were trying....??Have you had some issues with it
Phucan2017 said:
Yes. I'm sorry
---------- Post added at 01:17 PM ---------- Previous post was at 01:07 PM ----------
Can't restore coloros if backup?
Click to expand...
Click to collapse
No, coloros back ups require coloros bootloader and firmware. When I upload the zip to return to coloros bootloader,firmware and twrp, you can flash it then restore coloros backup.
khannz7 said:
What about the port you were trying....??Have you had some issues with it
Click to expand...
Click to collapse
Few issues with ramdisk causing bootloop. Hopefully soon.
MiniBlu said:
No, coloros back ups require coloros bootloader and firmware. When I upload the zip to return to coloros bootloader,firmware and twrp, you can flash it then restore coloros backup.
Few issues with ramdisk causing bootloop. Hopefully soon.
Click to expand...
Click to collapse
Happy to hear that buddy
Keep up the good work?
Was the sound and backlight working....
And was it Android N based
Has anyone checked that there are any serious errors?
khannz7 said:
Happy to hear that buddy
Keep up the good work
Was the sound and backlight working....
And was it Android N based
Click to expand...
Click to collapse
No. Only M based as we don't have a propper N kernel.
Phucan2017 said:
Has anyone checked that there are any serious errors?
Click to expand...
Click to collapse
It is the latest released version of Project Spectrum. No real changes except oppos(slight improvement over the 1st release). I have flashed it many times.
Ps I have added the file and instuctions to return to ColorOs in the OP.
MiniBlu said:
No. Only M based as we don't have a propper N kernel.
It is the latest released version of Project Spectrum. No real changes except oppos(slight improvement over the 1st release). I have flashed it many times.
Ps I have added the file and instuctions to return to ColorOs in the OP.
Click to expand...
Click to collapse
The battery issue was not fully charged, in the old spectrum I was and did not receive the extsdcard
Thanks miniblu, just one question, the link you posted to returning back to color os i think its a flashable link it seems cannot open, i wanted to download both of it so anything happens i can restore color os
Shotg1 said:
Thanks miniblu, just one question, the link you posted to returning back to color os i think its a flashable link it seems cannot open, i wanted to download both of it so anything happens i can restore color os
Click to expand...
Click to collapse
Oops, I paisted the wrong thing into the link. Fixed now.
MiniBlu said:
Oops, I paisted the wrong thing into the link. Fixed now.
Click to expand...
Click to collapse
Thanks for your fast reply. Hehehe i hope you fixed the rom you're trying to port or build.
Sir is this Color OS ROM flashable thru TWRP? TIA
alleandrojames said:
Sir is this Color OS ROM flashable thru TWRP? TIA
Click to expand...
Click to collapse
There is no ColorOs rom in this thread. I think you need to read the OP again. All files in this thread are twrp flashable, but if you don't understand what they're for you best leave them alone.
I will post a latest full ColorOs ROM in the next few days.
MiniBlu said:
There is no ColorOs rom in this thread. I think you need to read the OP again. All files in this thread are twrp flashable, but if you don't understand what they're for you best leave them alone.
I will post a latest full ColorOs ROM in the next few days.
Click to expand...
Click to collapse
Miniblu i think tanvir already made it flashable to twrp the latet and final version i think of color os, thats is the rom i glash to get back on color os
---------- Post added at 11:11 PM ---------- Previous post was at 11:06 PM ----------
I think i know now how to get temporary fixed missing sd card after reboot, just removed simtray then put it back then sd card is availabale, thank for this, im so sick using color os
---------- Post added at 11:38 PM ---------- Previous post was at 11:11 PM ----------
Miniblu r u planning to build lineage OS on spectrum?
Shotg1 said:
Miniblu i think tanvir already made it flashable to twrp the latet and final version i think of color os, thats is the rom i glash to get back on color os
---------- Post added at 11:11 PM ---------- Previous post was at 11:06 PM ----------
I think i know now how to get temporary fixed missing sd card after reboot, just removed simtray then put it back then sd card is availabale, thank for this, im so sick using color os
---------- Post added at 11:38 PM ---------- Previous post was at 11:11 PM ----------
Miniblu r u planning to build lineage OS on spectrum?
Click to expand...
Click to collapse
Yep, the rom from tanvir is twrp flashable but I was planning on uploading 1 that includes unlocked bootloader and twrp.
I have been trying to build lineage based on spectrum firmware, that was my reason for making all these zips to swap between spectrum and ColorOs firmwares. Unfortunately it seems that lineage have abandoned plans to switch to spectrum base last night (also f1f support). So we'll see where this ends up. I won't stop trying, but the road ahead looks difficult.
MiniBlu said:
Yep, the rom from tanvir is twrp flashable but I was planning on uploading 1 that includes unlocked bootloader and twrp.
I have been trying to build lineage based on spectrum firmware, that was my reason for making all these zips to swap between spectrum and ColorOs firmwares. Unfortunately it seems that lineage have abandoned plans to switch to spectrum base last night (also f1f support). So we'll see where this ends up. I won't stop trying, but the road ahead looks difficult.
Click to expand...
Click to collapse
Oppo company sucks they don't want to make our kernel open source, they just want to make money
Related
If you are having trouble doing the downgrade from Lollipop (5.0.1) to KitKat (4.4.2), like no IMEI (baseband) or directly fails when flashing via Odin, here's the solution (worked for me ):
1) Download the following firmware: www.sammobile.com/firmwares/download/40444/I9500UBUGNJ1_I9500UUBGNJ1_ARO
2) Before flashing the firmware via Odin, make a full wipe to the device (works best with a custom recovery, making wipe data/cache, format system, preload, modem, internal sd card, dalvik, etc). This is the custom recovery that i used: www.mega.co.nz/#!PNZHQSRA!CCnUXXAyCX8tpvc6riBI-mfRj0U3peESpchIYGFC_XY
3) After making a full wipe, reboot into download mode and flash the downloaded firmware, it should make the process without problems.
4) When the process completes successfully (Odin says PASS), wait the device to restart till the Samsung logo appears.
5) Do a hard reboot to the recovery mode by pressing Volume up, Home and Power buttons at the same time.
6) Then make a format factory reset, finally reboot normally.
This process has worked for me, making a downgrade from the official update 5.0.1 (SER - Russia) to this official version 4.4.2 (ARO - Argentina).
Hope it works for you too. If it helped, don't forget to hit the thanks button and comment bellow :good:
It's 100% neccesary to wipe the modem?
martin_carpio17 said:
It's 100% neccesary to wipe the modem?
Click to expand...
Click to collapse
No 100% necesary, but really recommended. I did it along with a full wipe and the downgrade was succesfull, without any issues
elias_gabriel said:
No 100% necesary, but really recommended. I did it along with a full wipe and the downgrade was succesfull, without any issues
Click to expand...
Click to collapse
any one tried ???
Yes please. Another feedback would be awesome ?
At this point I'm wasting my s4 hardware with lollipop
As you said, you were on 5.0.1 official stock, how did you wipe everything as you mentioned because that can only be done by custom recovery. Did u install custom recovery on 5.0.1?
---------- Post added at 01:15 AM ---------- Previous post was at 01:13 AM ----------
skchattha said:
As you said, you were on 5.0.1 official stock, how did you wipe everything as you mentioned because that can only be done by custom recovery. Did u install custom recovery on 5.0.1?
Click to expand...
Click to collapse
currently i am on official 5.0.1 India ROM, no custom recovery , no root, just official. How should i start? pls suggest. Just want to make sure every step is correct when doing.
skchattha said:
As you said, you were on 5.0.1 official stock, how did you wipe everything as you mentioned because that can only be done by custom recovery. Did u install custom recovery on 5.0.1?
---------- Post added at 01:15 AM ---------- Previous post was at 01:13 AM ----------
currently i am on official 5.0.1 India ROM, no custom recovery , no root, just official. How should i start? pls suggest. Just want to make sure every step is correct when doing.
Click to expand...
Click to collapse
Yes, I've installed a custom recovery (CWM 6.0.50) to do all those wipes, btw if your warranty void counter is on 0 and you want to keep that, don't install this and proceed doing the common wipes on stock recovery (format data - factory reset/wipe cache), and try then flashing the recommended firmware. As I said, I recommend to wipe ALL through a custom recovery before flashing the firmware, cause my counter was in 1 and through this method i was able to do a succesfull downgrade
I've uploaded the custom recovery that I used to do a full wipe. Install via Odin (only for people with warranty void counter 1, or which don't care losing warranty / set the counter to 1):
www.mega.co.nz/#!PNZHQSRA!CCnUXXAyCX8tpvc6riBI-mfRj0U3peESpchIYGFC_XY
Thanks a lot my friend, i will try. Fingers crossed..hope all goes well.
---------- Post added at 11:28 PM ---------- Previous post was at 11:26 PM ----------
elias_gabriel said:
I've uploaded the custom recovery that I used to do a full wipe. Install via Odin (only for people with warranty void counter 1, or which don't care losing warranty / set the counter to 1):
mega.co.nz/#!PNZHQSRA!CCnUXXAyCX8tpvc6riBI-mfRj0U3peESpchIYGFC_XY
Click to expand...
Click to collapse
Can you also pls confirm what you all selected in Odin? Thanks
skchattha said:
Can you also pls confirm what you all selected in Odin? Thanks
Click to expand...
Click to collapse
Sorry, what do you mean exactly? Is that i don't understand the question...
Helpful
Thanks for sharing, this will save life of many users !!
skchattha said:
As you said, you were on 5.0.1 official stock, how did you wipe everything as you mentioned because that can only be done by custom recovery. Did u install custom recovery on 5.0.1?
---------- Post added at 01:15 AM ---------- Previous post was at 01:13 AM ----------
currently i am on official 5.0.1 India ROM, no custom recovery , no root, just official. How should i start? pls suggest. Just want to make sure every step is correct when doing.
Click to expand...
Click to collapse
Did this worked for you, please confirm?
codehtm said:
Thanks for sharing, this will save life of many users !!
Click to expand...
Click to collapse
I hope so, you're welcome
any one have kitkat frimware indian version? plz share on google drive!!! need it!!!
---------- Post added at 04:06 PM ---------- Previous post was at 03:43 PM ----------
followed your steps failed!!!!
rinkulsk said:
any one have kitkat frimware indian version? plz share on google drive!!! need it!!!
---------- Post added at 04:06 PM ---------- Previous post was at 03:43 PM ----------
followed your steps failed!!!!
Click to expand...
Click to collapse
Wow, thats pretty strange, cause worked perfectly on my device. Actually i'm on this official 4.4.2 ARO
I downloaded ins firmware and followed your steps but failed!! I want 4.4.2 kit kat can some one mirror on Google drive ?
Sent from my GT-I9500 using XDA Free mobile app
rinkulsk said:
I downloaded ins firmware and followed your steps but failed!!
Click to expand...
Click to collapse
Have you flashed the recommended ARO firmware or another 4.4.2? One more time, this is recommended to downgrade from the russian 5.0.1, I've tested with this one, I don't know if it will work with the indian version.
But I need to be on Indian version bud!
Sent from my GT-I9500 using XDA Free mobile app
rinkulsk said:
But I need to be on Indian version bud!
Click to expand...
Click to collapse
Let me understand... Were you on the indian/russian 5.0.1 and you want to downgrade to an indian 4.4.2? I think it's no possible, like I said, the only firmware that worked for me was the latest ARO I9500UBUGNJ1 firmware.
Am on Indian 5.0 1 and want to downgrade to kitkat
Sent from my GT-I9500 using XDA Free mobile app
http://builds.cyngn.com/cyanogen-os.../cm-12.0-YNG1TAS0YL-bacon-signed-fastboot.zip
yet there's not userdata_64G.img
the md5 is similar with MEGA leak https://mega.co.nz/#!wFdAlboC!xIBIlx...Ft1OGMLJjQwkfA and https://www.androidfilehost.com/?fid=95916177934554833 by android police
yet difference from https://www.androidfilehost.com/?fid=95916177934554834
Any clues?
taufiqs said:
http://builds.cyngn.com/cyanogen-os...263178b74/cm-12.0-YNG1TAS0YL-bacon-signed.zip
yet there's not userdata_64G.img
the md5 is similar with MEGA leak https://mega.co.nz/#!wFdAlboC!xIBIlx...Ft1OGMLJjQwkfA and https://www.androidfilehost.com/?fid=95916177934554833 by android police
yet difference from https://www.androidfilehost.com/?fid=95916177934554834
Any clues?
Click to expand...
Click to collapse
Thats not a fastboot image friend. Its a OTA zip. The factory fastboot image for Cyanogen OS 12 aren't available yet.
---------- Post added at 12:43 PM ---------- Previous post was at 12:40 PM ----------
The best thing to do if you want to start fresh is to download and install a previous KitKat fastboot image of CM11S and then install the official Cyanogen OS 12 Lollipop OTA zip you have linked above through CM Recovery.
FYI, from the forum rules:
5. Create a thread or post a message only once.
As a large forum, we don't need unnecessary clutter. You're free to edit your message as you like, so if you do not receive an answer, revisit your message and see if you can describe your problem better. Not everyone is online at the same time so it might take a while before you receive an answer. (Also refer to Rule 16)
Click to expand...
Click to collapse
Bilhouse said:
Thats not a fastboot image friend. Its a OTA zip. The factory fastboot image for Cyanogen OS 12 aren't available yet.
---------- Post added at 12:43 PM ---------- Previous post was at 12:40 PM ----------
The best thing to do if you want to start fresh is to download and install a previous KitKat fastboot image of CM11S and then install the official Cyanogen OS 12 Lollipop OTA zip you have linked above through CM Recovery.
Click to expand...
Click to collapse
Yes i think so. btw, the contents are quite difference to other OTA zip (it's just like fastboot image but not complete).
CafeKampuchia said:
FYI, from the forum rules:
Click to expand...
Click to collapse
to be understood. I have deleted the other post.
CafeKampuchia said:
FYI, from the forum rules:
Click to expand...
Click to collapse
Who is that in reference to?
---------- Post added at 12:46 PM ---------- Previous post was at 12:45 PM ----------
taufiqs said:
Yes i think so. btw, the contents are quite difference to other OTA zip (it's just like fastboot image but not complete).
Click to expand...
Click to collapse
The reason for that is its a major change from KitKat to Lollipop.
Bilhouse said:
Who is that in reference to?
Click to expand...
Click to collapse
The OP posted the same question in two other threads then started this one.
---------- Post added at 06:51 PM ---------- Previous post was at 06:48 PM ----------
Bilhouse said:
Thats not a fastboot image friend. Its a OTA zip. The factory fastboot image for Cyanogen OS 12 aren't available yet.
---------- Post added at 12:43 PM ---------- Previous post was at 12:40 PM ----------
The best thing to do if you want to start fresh is to download and install a previous KitKat fastboot image of CM11S and then install the official Cyanogen OS 12 Lollipop OTA zip you have linked above through CM Recovery.
Click to expand...
Click to collapse
Actually not true. Both are the full factory image and can be flashed even after wiping /system and /data. The difference is the TWRP version has been modified by removing a script so it will work reliably when flashed with TWRP.
CafeKampuchia said:
The OP posted the same question in two other threads then started this one.
---------- Post added at 06:51 PM ---------- Previous post was at 06:48 PM ----------
Actually not true. Both are the full factory image and can be flashed even after wiping /system and /data. The difference is the TWRP version has been modified by removing a script so it will work reliably when flashed with TWRP.
Click to expand...
Click to collapse
Those aren't fastboot images which he linked.
so it can be flashed using stock recovery?
i have corrected the link name, it should be ended with xxxx-fastboot.zip
have been corrected
http://builds.cyngn.com/cyanogen-os.../cm-12.0-YNG1TAS0YL-bacon-signed-fastboot.zip
taufiqs said:
http://builds.cyngn.com/cyanogen-os.../cm-12.0-YNG1TAS0YL-bacon-signed-fastboot.zip
yet there's not userdata_64G.img
the md5 is similar with MEGA leak https://mega.co.nz/#!wFdAlboC!xIBIlx...Ft1OGMLJjQwkfA and https://www.androidfilehost.com/?fid=95916177934554833 by android police
yet difference from https://www.androidfilehost.com/?fid=95916177934554834
Any clues?
Click to expand...
Click to collapse
Those userdata.img and userdata_64G.img are same in 44S and 05Q. userdata.img in lollipop is same as 44S and 05Q. So you can use userdata_64G.img from any of 44S and 05Q.
Bilhouse said:
Those aren't fastboot images which he linked.
Click to expand...
Click to collapse
Correct. Both are flashable zip files.
CafeKampuchia said:
Correct. Both are flashable zip files.
Click to expand...
Click to collapse
Sorry for it. Then how about the fastboot. It should be installed from the bootloader right?
The previous one are flashable via recovery.
taufiqs said:
Sorry for it. Then how about the fastboot. It should be installed from the bootloader right?
The previous one are flashable via recovery.
Click to expand...
Click to collapse
yes
http://forum.xda-developers.com/oneplus-one/general/guide-stock-cm12s-installation-fastboot-t3082113
droid.riz said:
http://forum.xda-developers.com/oneplus-one/general/guide-stock-cm12s-installation-fastboot-t3082113
Click to expand...
Click to collapse
Or anyone could go to my guide thread, where you copied these instructions from.
Transmitted via Bacon
STEPS TO INSTALL CM12S OFFICIAL ROMS (IF you are running CM11S)
Firstly ensure that your Oneplus One device has the bootloader unlocked and you have the latest build of TeamWin Recovery Installed which is
openrecovery-twrp-2.8.5.1-bacon.img
Threads to install this can be found on xda
Next you need to do the following
1. Switch of your phone
2. Press down volume button and power button
3. Enter TeamWin recovery
4. Wipe factory data reset
5. Install / Flash the CM12S file which is openrecovery-twrp-2.8.5.1-bacon (584MB) - hope you have downloaded this from the the link given on this thread by Taufiq.
PS:Important thin to remember if you are getting an error while flashing this ROM file then you first need to update your TeamWin recovery version.
I was on 2.8.0.1 and it gave me an error to install this, but when I updated the Teamwin recovery to 2.8.5.1 and tried to flash it it worked perfectly fine.
All the best and enjoy the official CM12S for Oneplus..It rocks!!!
Introducing pure Flymeos 64 bit version builded from source by Deelie
My personal Experience..
Pros:
1. ROM is awesome with simple & neat interface, features are great.
2. Good amount of free RAM, i noticed ~450mb free after installing few daily use apps.
3. No noticeable lags, Rom is smooth.
4.Excellent battery backup (tested). Can be used as daily ROM
Cons:
1. Few RANDOM bugs(not confirmed) for many users.. such as...
> Gapps installation
> 2nd sim not working
> couldn't change network to 3g
> play store sign in issues
etc.,
I'm very respectfull towards developer & friends here for all their works..
I request if any dev take interest to fuurther develop this ROM for A6000. lot many users like myself will be greatful.
CURRENT STATUE
Performance------------------------------great
Battery Backup---------------------------great
boot-loop , glitch, crash-----------------none
Functions not working, disabled-------none
Downloads
ROM:http://pan.baidu.com/s/1pJRdvXD
PATCH ROM:http://pan.baidu.com/s/1gdjU127
SOURCE:http://bbs.loorin.com/forum.php?mod=...extra=page=1
XDAevDB Information
Flymeos 64Bit, ROM for lenovo-a6000
Contributors
Deelie
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: FlymeOS
Version Information
Status: Stable
Stable Release Date: 2016-01-15
Created 2016-01-12
Last Updated 2016-01-15
It would be great if you change the link and mirror it to google drive or some other .
I have tried to download this rom numerous times, but after some time ,link gets expired. This is the problem with Chinese cloud servers.
EDIT:
I've flashed this ROM.
It's simply awesome , even the bugs u mentioned are not there in my case(touchwood).
BUGS:
1) Don't setup screen lock otherwise you have to reflash the ROM.(you can use other apps if u need screen lock)
2)don't change the network mode to 2g because in my case, I was not been able to place calls from sim1.
i cant flash dis rom shown error.......
vardhan21 said:
i cant flash dis rom shown error.......
Click to expand...
Click to collapse
Flash the patch file first and then flash the rom and gapps.
DON'T FORGET to flash Gapps setup removal tool and SuperSU 2.46.
2nd sim not working?
notoriouspk said:
2nd sim not working?
Click to expand...
Click to collapse
All things are working fine except screen lock.
nice will try soon thanks
notoriouspk said:
nice will try soon thanks
Click to expand...
Click to collapse
how r we supposed to download from this garbage Chinese link ....can u upload it some where else thanks
shivamgupta1996 said:
Flash the patch file first and then flash the rom and gapps.
DON'T FORGET to flash Gapps setup removal tool and SuperSU 2.46.
Click to expand...
Click to collapse
K...I flashed dis time but....bootloop in device......reboot system open twrp recovery in china language...again flash dis twrp recovery...again bootloop and shown same twrp recovey in china language ...any suggestion
I am sorry, I did not read the comments before....
is there any buys after the 15/1/2016 update?
bugs like 2nd sim not working,
google sign in.
and other as menctioned in the discription of the rom!!
vardhan21 said:
K...I flashed dis time but....bootloop in device......reboot system open twrp recovery in china language...again flash dis twrp recovery...again bootloop and shown same twrp recovey in china language ...any suggestion
Click to expand...
Click to collapse
First boot usually takes a lot of time .Be patient.
I again repeat the steps:
1) flash patch file.
2)flash ROM and GApps.(wipe cache and dalvik to be on safer side)
3)flash gapps removal tool zip(download it from A-mod site)
4)flash SuperSU and then reboot.
---------- Post added at 04:33 PM ---------- Previous post was at 04:26 PM ----------
BenNy tHa said:
I am sorry, I did not read the comments before....
is there any buys after the 15/1/2016 update?
bugs like 2nd sim not working,
google sign in.
and other as menctioned in the discription of the rom!!
Click to expand...
Click to collapse
Read my first comment (Updated) on this thread.
Which xposed version to use...i got bootloop using v79...which xposed is working?? Even the chinese xposed is not working
still ...i cant install dis rom....bootloop...and chineese tprp recovery shown after flash rom,gapps,removel gapps,su
vardhan21 said:
still ...i cant install dis rom....bootloop...and chineese tprp recovery shown after flash rom,gapps,removel gapps,su
Click to expand...
Click to collapse
Me tooo same bootloop... 1st i cant able to install. After change of twrp i can able to flash. But after flashed it always bootloop at logo itself. What to do now....
---------- Post added at 01:40 AM ---------- Previous post was at 01:39 AM ----------
shivamgupta1996 said:
First boot usually takes a lot of time .Be patient.
I again repeat the steps:
1) flash patch file.
2)flash ROM and GApps.(wipe cache and dalvik to be on safer side)
3)flash gapps removal tool zip(download it from A-mod site)
4)flash SuperSU and then reboot.
---------- Post added at 04:33 PM ---------- Previous post was at 04:26 PM ----------
Read my first comment (Updated) on this thread.
Click to expand...
Click to collapse
Pathch file okay. Rom ok. Gapps ok. But what is that gapps removal tool. I amod i cant able to find it...
---------- Post added at 01:45 AM ---------- Previous post was at 01:40 AM ----------
shivamgupta1996 said:
Flash the patch file first and then flash the rom and gapps.
DON'T FORGET to flash Gapps setup removal tool and SuperSU 2.46.
Click to expand...
Click to collapse
Link for gapps setup removal tooll......
rule breaker sarath said:
Me tooo same bootloop... 1st i cant able to install. After change of twrp i can able to flash. But after flashed it always bootloop at logo itself. What to do now....
---------- Post added at 01:40 AM ---------- Previous post was at 01:39 AM ----------
Pathch file okay. Rom ok. Gapps ok. But what is that gapps removal tool. I amod i cant able to find it...
---------- Post added at 01:45 AM ---------- Previous post was at 01:40 AM ----------
Link for gapps setup removal tooll......
Click to expand...
Click to collapse
Here it is:
https://drive.google.com/file/d/0B8Zvewy9DD59ajZBU1JZY19LOVU/view?usp=docslist_api
Be patient,it takes a lot of time to boot.
shivamgupta1996 said:
Here it is:
https://drive.google.com/file/d/0B8Zvewy9DD59ajZBU1JZY19LOVU/view?usp=docslist_api
Be patient,it takes a lot of time to boot.
Click to expand...
Click to collapse
Bro... even after this also bootloop.... i dont know y.
Can u send me the twrp link which u used to flash this rom. Bcz the error may be due to this twrp also. Am using twrp 3.0.2 by sevenmax
rule breaker sarath said:
Bro... even after this also bootloop.... i dont know y.
Can u send me the twrp link which u used to flash this rom. Bcz the error may be due to this twrp also. Am using twrp 3.0.2 by sevenmax
Click to expand...
Click to collapse
I've used TWRP by JAV team:
https://drive.google.com/file/d/0B8Zvewy9DD59c29EN1ZlWE9SQ2c/view?usp=drivesdk
I flashed with jav team only. Flymeos flashed successfully, but even though bootloop occurs bro.... aftr that not openingggg
So I rebranded to bln-l22, installed Oreo and everything's good, but today I wanted to flash something but I discovered that for some reason I can't mount the /data and so I checked my file system and it was f2fs which is fine, so is there a fix for that ?
That's not an error man, it's because we don't have a fully working TWRP on Oreo yet. Actually there is only the TWRP that i assume you're using, the elemental rom TWRP by KingOfMezi.
At the moment, you have to flash supported files through fastboot. On an Oreo ROM/GSI, the architecture of our phone won't change, so the situation about TWRP is the same, but if I'm not wrong, at least GSIs can be rooted easily.
RedSkull23 said:
That's not an error man, it's because we don't have a fully working TWRP on Oreo yet. Actually there is only the TWRP that i assume you're using, the elemental rom TWRP by KingOfMezi.
At the moment, you have to flash supported files through fastboot. On an Oreo ROM/GSI, the architecture of our phone won't change, so the situation about TWRP is the same, but if I'm not wrong, at least GSIs can be rooted easily.
Click to expand...
Click to collapse
I remember using the TWRP in the rebrand guide by @shashank1320, I'll try flashing another recovery this weekend and will update
CodingAddict704 said:
I remember using the TWRP in the rebrand guide by @shashank1320, I'll try flashing another recovery this weekend and will update
Click to expand...
Click to collapse
Update me if you find a working one so!
CodingAddict704 said:
I remember using the TWRP in the rebrand guide by @shashank1320, I'll try flashing another recovery this weekend and will update
Click to expand...
Click to collapse
Twrp from elemental ROM should work on oreo.
shashank1320 said:
Twrp from elemental ROM should work on oreo.
Click to expand...
Click to collapse
Yeah it works bro, as you'll know it only can't mount /data partition, but at least it allows to flash Magisk and ZIP/.img files.
RedSkull23 said:
Yeah it works bro, as you'll know it only can't mount /data partition, but at least it allows to flash Magisk and ZIP/.img files.
Click to expand...
Click to collapse
https://forum.xda-developers.com/honor-6x/how-to/flash-roms-factory-reset-boot-img-t3856013
---------- Post added at 02:16 AM ---------- Previous post was at 02:07 AM ----------
shashank1320 said:
Twrp from elemental ROM should work on oreo.
Click to expand...
Click to collapse
Shashank you know more about this stuff than I do. Is the above guide safe because I don't want to put this out there if it puts peoples personal data at risk. I believe you can still encrypt the data but this stops it from being forced encrypted while installing the ROM? Not sure. Would like your feedback if possible. Thanks.
I am using Peter's recovery and wish to go back to stock recovery as installing ota is tiring. How can I do that without losing data and files?
If you are using official MIUI ROM, dirty flashing full recovery ROM will also overwrite custom recovery with stock recovery.
AbioticSpoon said:
I am using Peter's recovery and wish to go back to stock recovery as installing ota is tiring. How can I do that without losing data and files?
Click to expand...
Click to collapse
are you rooted?
if ues then just unroot using magisk unistaller and reboot it will restore stock recovery then use ota to update then again you can flash twrp peter recovery by fastboot and boot in to recovery and then flash magisk it will again have both recovery and root
my device shows encrypted status
AbioticSpoon said:
I am using Peter's recovery and wish to go back to stock recovery as installing ota is tiring. How can I do that without losing data and files?
Click to expand...
Click to collapse
Just download the fast boot rom from the official website and flash it by mi flash tool.
And during flashing it select flash all except data.
And you will lose nothing and your recovery will be restored.
Then you can flash ota by that.
---------- Post added at 08:23 PM ---------- Previous post was at 08:21 PM ----------
blueandro said:
are you rooted?
if ues then just unroot using magisk unistaller and reboot it will restore stock recovery then use ota to update then again you can flash twrp peter recovery by fastboot and boot in to recovery and then flash magisk it will again have both recovery and root
my device shows encrypted status
Click to expand...
Click to collapse
Really?
I should try this.
Have you tried this, what is the concept behind this?
How can unrooting can restore stock recovery?
yes i have tried it and i m on latest stable 10.3
13
blueandro said:
yes i have tried it and i m on latest stable 10.3
13
Click to expand...
Click to collapse
Complete uninstall or just restore image option?
---------- Post added at 01:24 PM ---------- Previous post was at 01:22 PM ----------
blueandro said:
yes i have tried it and i m on latest stable 10.3
13
Click to expand...
Click to collapse
And are u encrypted? Means does twrp ask for screen lock password during going to recovery?
gautamajay52 said:
Complete uninstall or just restore image option?
---------- Post added at 01:24 PM ---------- Previous post was at 01:22 PM ----------
And are u encrypted? Means does twrp ask for screen lock password during going to recovery?
Click to expand...
Click to collapse
using peters recovery latest one
i m not using my fone with lock password so it didn't ask
blueandro said:
using peters recovery latest one
i m not using my fone with lock password so it didn't ask
Click to expand...
Click to collapse
Ok... I will try this... wating for new update that i can verify it too.
Thanks
I have one solution
simple
just things needed are:
1. miui stock recovery img
2. vbmeta
next,
1. First flash recovery image.
2. Then flash vbmeta image.
what does vbmeta do. it actually saves the recovery image after flashing new recovery.
3. Finished reboot