Database Info

[need help] is there anyone here can root this cloudfone thrill plus and thrill hd??

Is there anyone else can root this phone without migrating to Walton?? badly needed to remove all the bloats into this phone and also i want to speed up my performance to this phone. PLS HELP PLS
or if you cant you do a compatibility to root this phone in FRAMA ROOT or KINGROOT. :'(
PLS DONT IGNORE HELP US BADLY NEEDED :'(

Wait bro I'm going to post a tutorial on how to root cloudfone thrill plus, I was just able to root it yesterday

EJudeGarcia said:
Is there anyone else can root this phone without migrating to Walton?? badly needed to remove all the bloats into this phone and also i want to speed up my performance to this phone. PLS HELP PLS
or if you cant you do a compatibility to root this phone in FRAMA ROOT or KINGROOT. :'(
PLS DONT IGNORE HELP US BADLY NEEDED :'(
Click to expand...
Click to collapse
Hey bro, here is what I did to root my cloudfone thrill plus. Just follow it and you won't run any problem.
Prerequisites
adb:
http://universaladbdriver.com/download/universal-adb-driver-v4-0
twrp:
https://drive.google.com/open?id=0B3254aQEzX2aS2dMOWk5ZDBoV1E
superSU:
https://drive.google.com/open?id=0B3254aQEzX2adlBZQ3JESzZYc0k
USB cable
Procedures
First setup the ASB/FASTBOOT driver. after that you need to properly install usb driver for your device( you can google an universal driver)
Now you need to enable developer option, just go to settings then about phone tap on build number several times until you get an pop up message saying "you are now a developer".
Go to developer option then make sure you activate developer option together with OEM unlocking(this is necessary so you can unlock bootloader to flash the twrp recovery) and make sure you enable usb debugging option
Now you need to backup everything on your phone because the following steps will wipe your data to factory.
Now connect your phone and install driver for your phone no need to setup this if you already did it prior to this step
Open a command line change the directory to where you installed your adb and type the following command: "adb devices" (without quotes) you should see your device on the lists(actually it is a several sets of letters and numbers) type the following command: "adb reboot bootloader" your phone will reboot to bootloader and you should see fastboot mode on your device.
Now make sure that fastboot recognized your device this is a little bit tricky because on my case adb failed to recognized my device on fastboot mode several times, so I need to repeat to boot to fastboot until fastboot can recognize my phone.
Now type in this command: "fastboot devices" again you should see your device recognized by fastboot by simply showing again several sets of numbers and letters.
Now type in "fastboot oem unlock" you should see a message and options on your device saying press volume up to unlock bootloader or press volume down to reboot normally. (again you should backup your phone prior to this step) now choose to unlock bootloader and wait for it to finished.
After you unlock your bootloader you need to flash your recovery to enable to flash superSU to do so just type in following command: "fastboot flash recovery [this should be the location where you saved the twrp recovery]" sample fastboot flash recovery E:\User\users\download\recovery.img
After you successfully flash your recovery reboot now to twrp by typing this command: "fastboot reboot recovery"
Now you're on twrp recovery(make sure you save superSU on sdcard) go to install and install superSU from sdcard wait for it to be done.
Now to avoid bootloop, just wipe /data partion only and kindly factory reset your phone.
After that normally boot your phone. Viola you successfully root your cloudfone thrill plus.
If you run on any trouble don't be hesitant to ask help I gladly help you with anything I can:good:

Thank you so much! I hope it will really work hehe by the way do you have any stock rom for Cloudfone Thrill Plus?

EJudeGarcia said:
Thank you so much! I hope it will really work hehe by the way do you have any stock rom for Cloudfone Thrill Plus?
Click to expand...
Click to collapse
not yet but since I have twrp now I'm going to backup it for emergency purposes.. hehe
---------- Post added at 08:43 PM ---------- Previous post was at 08:10 PM ----------
EJudeGarcia said:
Thank you so much! I hope it will really work hehe by the way do you have any stock rom for Cloudfone Thrill Plus?
Click to expand...
Click to collapse
Prerequisites
adb:
https://forum.xda-developers.com/showthread.php?t=2588979
android driver:
https://androidmtk.com/download-universal-adb-driver
twrp:
https://drive.google.com/open?id=0B3254aQEzX2aS2dMOWk5ZDBoV1E
superSU:
https://drive.google.com/open?id=0B3254aQEzX2adlBZQ3JESzZYc0k
USB cable
Procedures
First setup the ADB/FASTBOOT. Just install it and and follow instructions. This is needed to send commands on your phone.
Next install the driver this will allow the adb/fastboot software you installed earlier to read your device when you connect it on computer. When installing the driver connect first your phone so that the driver can read and identity your phone then proceed on installation process.
Now you need to enable developer option, just go to settings then about phone tap on build number several times until you get an pop up message saying "you are now a developer".
Go to developer option then make sure you activate developer option together with OEM unlocking(this is necessary so you can unlock bootloader to flash the twrp recovery) then enable usb debugging option.
Now you need to backup everything on your phone because the following steps will wipe your data to factory.
Open a command line change the directory to where you installed your adb ( since it is a installer type adb, it automatically install the adb on the right folder so just type in cd \adb. but if that doesn't work try to locate where your adb is located).
After changing on the adb just type in this command: "adb devices" (without quotes) you should see your device on the lists(actually it is a several sets of letters and numbers) type the following command: "adb reboot bootloader" your phone will reboot to bootloader and you should see fastboot mode on your device.
Now make sure that adb recognized your device this is a little bit tricky because on my case adb failed to recognized my device on fastboot mode several times.
Now type in this command: "fastboot devices" again you should see your device recognized by fastboot by simply showing again several sets of numbers and letters.
Now type in "fastboot oem unlock" you should see a message and options on your device saying press volume up to unlock bootloader or press volume down to reboot normally. (again you should backup your phone prior to this step because it will factory reset the phone after unlocking bootloader) now choose to unlock bootloader and wait for it to finished.
After you unlock your bootloader you need to flash your recovery to enable to flash superSU to do so just type in following command: "fastboot flash recovery [this should be the location where you saved the twrp recovery]" sample fastboot flash recovery E:\User\users\download\recovery.img
After you successfully flash your recovery reboot now to twrp by typing this command: "fastboot reboot recovery"
Now you're on twrp recovery(make sure you save superSU on sdcard) go to install and install superSU from sdcard wait for it to be done.
Now to avoid bootloop wipe everything you can wipe( probably the only thing you need to wipe is /data and /system partition.
After that normally boot your phone. Viola you successfully root your cloudfone thrill plus.
If you run on any trouble don't be hesitant to ask help I gladly help you with anything I can:good:
please disregard my previous tutorial this is now my official tutorial

That TWRP file that you link is that for Cloudfone Thrill plus only because i have a Cloudfone Thrill Hd does it still gonna work if I follow the same procedure???
You said yesterday can i add you on facebook so we can chat on messenger and Show me the root checker app that it is already rooted hehe just to make sure ?
And also do we any have support for Lineage OS?? Or any popular Roms like Resurrection??

EJudeGarcia said:
That TWRP file that you link is that for Cloudfone Thrill plus only because i have a Cloudfone Thrill Hd does it still gonna work if I follow the same procedure???
You said yesterday can i add you on facebook so we can chat on messenger and Show me the root checker app that it is already rooted hehe just to make sure ?
And also do we any have support for Lineage OS?? Or any popular Roms like Resurrection??
Click to expand...
Click to collapse
I don't know if that is suitable for cloudfone thrill HD, I only tried it on thrill plus but as to the dev that gave that file, it's only for thrill plus. As to the rom I'm still searching for them I haven't fine any yet, I'll just update you if I found any??

i already flash twrp on my phone but somehow my os got deleted after and i was bootlooped on recovery logo recovery at the same time.

ayaw
hndi ko alam bat ayaw ma root nitong ctp ko, sinunod ko naman yung instruction sir Nico pero ayaw pa dn after mag "fast oem boot" ako tpos pag press ko ng up volume mag stockup nalg tpos ayaw na mag reboot ,ano po dpat kong gawin.​

lienard20 said:
hndi ko alam bat ayaw ma root nitong ctp ko, sinunod ko naman yung instruction sir Nico pero ayaw pa dn after mag "fast oem boot" ako tpos pag press ko ng up volume mag stockup nalg tpos ayaw na mag reboot ,ano po dpat kong gawin.​
Click to expand...
Click to collapse
Na flash mo na ba ung twrp??​

EJudeGarcia said:
Na flash mo na ba ung twrp??
Click to expand...
Click to collapse
flash po ba muna yung twrp? bagu mag proceed sa pagroroot?,
yun po ba yung 1st step?,

Yes flash mo muna. Tapos pag na flash mo na twrp tyaka mo iflash yung Super Su.zip sa twrp tapos ayun rooted kana

EJudeGarcia said:
Yes flash mo muna. Tapos pag na flash mo na twrp tyaka mo iflash yung Super Su.zip sa twrp tapos ayun rooted kana
Click to expand...
Click to collapse
sorry for late reply, but I just wanna ask, is your phone still in bootloop mode or are you able to fix it?

For others na ma papadpad dito ito po yung evidence na working ang tutorial para sa thrill plus.

EJudeGarcia said:
Na flash mo na ba ung twrp??
Click to expand...
Click to collapse
Sir na fix na po bah yung problem nyo sa bootloop? and may copy po ba kayo ng stock OS?

EJudeGarcia said:
i already flash twrp on my phone but somehow my os got deleted after and i was bootlooped on recovery logo recovery at the same time.
Click to expand...
Click to collapse
I guess im late but you could have booted the twrp instead of flashing it now you have to reflash stock ROM
To boot the twrp instead of flashing it -good to make a full nandroid or twrp ROM dump
fastboot boot <twrp-image-name>.img

nico1228 said:
Sir na fix na po bah yung problem nyo sa bootloop? and may copy po ba kayo ng stock OS?
Click to expand...
Click to collapse
Wala akong stock rom eh naka custom rom lng pero dinodownload ko pa kc ung Stock Rom eh

sir may i use the steps for cloudfone thrill boost?

I need help for rooting cloudfone thrillpower

Cant fastboot oem unlock for the 2nd time lol.
first try few months ago is a success but I bricked my phone from installing Xposed framework. good news is phone is okay now but have few glitches or errors (like the sound system of my phone suddenly perform not the same) now stucked on fastboot mode even i clicked up or down volume it wont respond lol)
P.S. -> I am willing to do anything to root my phone again just give me other options to root it. please I am begging.

I need stock recovery.img for (Asus Memopad Fhd 10) me302kl

I forgot to unlock my device before flashing TWRP recovery. Now it stuck in fastboot mode and it says "Invalid boot image !!!".
OS is not starting.
Recovery mode is not opening.
I have only fastboot mode and fastboot connected to Windows PC.
I tried to flash original boot.img from original ROM files but didnt work. Original .zip files don't include recovery.img. It is just a normal folder. At lease i have to unlock this device from fastboot to continue flashing custom ROM.
Can anyone help me?

I need the recovery.img ,too. Someone can help us ,please.

Hi all, I had the same case. You can refer to the following page:
https://w3bsit3-dns.com/forum/index.php?showtopic=545744&st=2260
Then, do
1) Restore via Fastboot mode with service firmware
2) Firmware update with microsd card
I can at least return back to the stock firmware.

dannychow said:
Hi all, I had the same case. You can refer to the following page:
https://w3bsit3-dns.com/forum/index.php?showtopic=545744&st=2260
Then, do
1) Restore via Fastboot mode with service firmware
2) Firmware update with microsd card
I can at least return back to the stock firmware.
Click to expand...
Click to collapse
It's useful. I can return back,too. Thank you very much.

Have same problem, solution link is broken
Hello YKcho and Dannychow,
I have the same problem and the link you posted is broken. could you please guide me through the solution?
currently I have fastboot installed and operational (adb does not find a device)
Device status:
(bootloader) Device unlocked: false
(bootloader) Device tampered: true
(bootloader) Device granted: false
(bootloader) SB=Y
thanks in advance.

Good evening I have read all the messages of the forum, and I have tried the various solutions to solve the problem.
It tells me "Invalid boot image!" and does nothing else even when restarting. Connecting it to the PC I can see the code of the tablet with ADB and command fastbot devices.
The tablet is recognized in peripheral management as Asus Android Device / Asus Bootloader Interface
I downloaded this firmware ... ME302KL-OPEN_epad-eng-900M-hdpi-H00_0.16.F_0521-10.10.0.52.4.8-20130731-1422-Rawdata.rar but it doesn't work.
I ran the flashall.cmd file as administrator (Right click on the file and choose: run it as administrator)., The command "debrick-flashall.cmd", and also the commands flashall-ME302KL-1GMEM.cmd or if you also have the brick debrick-flashall-ME302KL-1GMEM.cmd without the tablet exiting FASTBOOT mode. Is it possible that it doesn't work because my operating system is WIN 10 ?? ... is there any firmware that works with windows 10 or some other indication to solve the problem.
Thank you
Buonasera ho letto tutti i messaggi del forum , ed ho provato le varie soluzioni per risolvere il problema.
Mi dice "Invalid boot image!" e non fa altro anche riavviando. Collegandolo al pc riesco a vedere il codice del tablet con ADB e comando fastbot devices.
Il tablet e' riconosciuto in gestione periferiche come Asus Android Device/ Asus Bootloader Interface
HO scaricato questo firmware ...ME302KL-OPEN_epad-eng-900M-hdpi-H00_0.16.F_0521-10.10.0.52.4.8-20130731-1422-Rawdata.rar ma non funziona.
Ho eseguito il file flashall.cmd come amminisreatore ( Tasto destro sul file e scegli: eseguilo come amministratore)., l comando "debrick-flashall.cmd", ed anche i comandi flashall-ME302KL-1GMEM.cmd oppure se hai anche il brick debrick-flashall-ME302KL-1GMEM.cmd senza che il tablet uscisse dalla modalità FASTBOOT. E' possibile che non funzioni perchè il mio sistema operativo è WIN 10??...c'e qualche firmware che funzioni con windows 10 o qualche altra indicazione per risolvere il problema.
grazie

Guide to flash an EDL file, please

Hi guys:
Once again it's me... I have tried with no success to "covert" my Axon 10 Pro from Mexico (Guess US model, 855A03 no NA 855A03_NA) to EU, I have downloaded several zip files from XDA and other sites. I have tried with QFIL, MiFlash and the EDL tool as well.
But none of them work, do you know if this is possible or a guide to do it?
MiFlash: Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
QFIL: Error (can't remember right now)
EDL: Error (can't remember right now)
Or maybe a way to recover fastboot to try the Lineage ROM, since I don't have it... I tried with adb reboot bootloader (no go, the phone restarts and goes directly to the carrier logo, no fastboot) I have tried with the vol - and power keys (no go, the same).
Ooooooorrr.... Maybe a way to install TWRP from EDL since I haven't fastboot, I've tried with emmcdl:
emmcdl -p COM4 -f prog_ufs_firehose_sdm855.elf -b recovery twrp.img
It appears to flash it, but after that it reboots and the old recovery is there.
Kind regards!

So... I've finally installed TWRP using a ROM from other forum, but in the end it didn't end as expected, I could install recovery, then I tried to install lineage but... Bootloop.
I´ll try again later.
JUst to let you know, is possible to install TWRP. I'll post my tutorial later. Regards

zparallax said:
Hi guys:
Once again it's me... I have tried with no success to "covert" my Axon 10 Pro from Mexico (Guess US model, 855A03 no NA 855A03_NA) to EU, I have downloaded several zip files from XDA and other sites. I have tried with QFIL, MiFlash and the EDL tool as well.
But none of them work, do you know if this is possible or a guide to do it?
MiFlash: Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
QFIL: Error (can't remember right now)
EDL: Error (can't remember right now)
Or maybe a way to recover fastboot to try the Lineage ROM, since I don't have it... I tried with adb reboot bootloader (no go, the phone restarts and goes directly to the carrier logo, no fastboot) I have tried with the vol - and power keys (no go, the same).
Ooooooorrr.... Maybe a way to install TWRP from EDL since I haven't fastboot, I've tried with emmcdl:
emmcdl -p COM4 -f prog_ufs_firehose_sdm855.elf -b recovery twrp.img
It appears to flash it, but after that it reboots and the old recovery is there.
Kind regards!
Click to expand...
Click to collapse
I have the same version (telcel) es una lástima que Telcel ni ZTE le den seguimiento para actualizar, si pudiste cambiarlo a la versión de EU o internacional, agradecer

[FIXED] Qualcomm Crash Dump mode.

I finally found the solution to the Qualcomm Crash Dump Mode error. Generally a lot of people would recommend flashing the OOS again through fastboot but not all OOS can fix the crash dump mode error. However the 9.X.X variants of OOS are effective in fixing this error. Just download this ROM, extract it, connect your phone to PC in fastboot mode and press flash all in the extracted ROM folder. Voila, your phone's alive again.

Viranch said:
I finally found the solution to the Qualcomm Crash Dump Mode error. Generally a lot of people would recommend flashing the OOS again through fastboot but not all OOS can fix the crash dump mode error. However the 9.X.X variants of OOS are effective in fixing this error. Just download this ROM, extract it, connect your phone to PC in fastboot mode and press flash all in the extracted ROM folder. Voila, your phone's alive again.
Click to expand...
Click to collapse
Hello buddy, I just want to ask because this is 9.5.8. file and I'm currently at OB15, is it safe to flash?

edong23 said:
Hello buddy, I just want to ask because this is 9.5.8. file and I'm currently at OB15, is it safe to flash?
Click to expand...
Click to collapse
yes.

Hi guys. I got the crash dump error after trying to flash the new OTA. I found this post, flashed the linked fastboot rom, but then it just gets stuck on boot. Since then I've tried to flash a few different fastboot roms but I just end up with the crash dump or stuck on boot. Any suggestions would be much appreciated

Viranch said:
Finalmente encontrei a solução para o erro do Qualcomm Crash Dump Mode. Geralmente, muitas pessoas recomendariam atualizar o OOS novamente através do fastboot, mas nem todos os OOS podem corrigir o erro do modo de despejo de memória. No entanto, as variantes 9.XX do OOS são eficazes para corrigir esse erro. Basta baixar essa ROM, extraí-la, conectar seu telefone ao PC no modo fastboot e pressionar flash all na pasta da ROM extraída. Voila, seu telefone está vivo novamente.
Click to expand...
Click to collapse
Essa ROM serve para o Meizu Note 9?

if bootloader is unlocked just downloaded 3.5.2 recovery img boot into twrp go to advance>flash current recovery and reboot

Viranch said:
I finally found the solution to the Qualcomm Crash Dump Mode error. Generally a lot of people would recommend flashing the OOS again through fastboot but not all OOS can fix the crash dump mode error. However the 9.X.X variants of OOS are effective in fixing this error. Just download this ROM, extract it, connect your phone to PC in fastboot mode and press flash all in the extracted ROM folder. Voila, your phone's alive again.
Click to expand...
Click to collapse
Wow...!! Literally a lifesaver. Got my OP7 up and running with this ROM. Thanks a ton..!!

how you fix this qualcomm crash dump mod plz explain me. my 4n same issue
whan i put EDL mod my 4n is auto reboot

TWRP AUTO FLASHER FOR REDMI GO by An ASP (TechyMinati)

TWRP AUTO FLASHER FOR REDMI GO by An ASP (TechyMinati);
---------------------------------------------------------------------------------------------
What is Twrp Auto flasher for Redmi Go ?
- Its a tool that makes twrp flashing even easier, Just Boot Phone in Fastboot Mode, Connect it To PC & Run 'flash-twrp' from the Autoflasher, & Boom Twrp is Installed in your device.
----------------------------------------------------------------------------------------------------------------------------------
How To Use :-
-Download Autoflasher.zip
-Extract it in PC
-Boot Redmi Go to Fastboot
-Click On "flash-twrp"
-Wait few secs for process to complete
-Boom! Now Twrp is Successfully Installed in Your Device...
---------------------------------------------------------------------------------------------------------------------------------
Note :- This Work is Purely Mine, If you want to copy it for other devices,take my Permission and Copy. Thanks
------------------------------------------------------------------------------------------------------------------------------------
Press Thanks On my Xda Thread
----------------------------------------------------------------------------------------------------------------------------
Downloads :-
http://www.mediafire.com/file/b6dqvl2t8f9vs5k/REDMI_GO_-_TWRP_AUTOFLASH.7z/file

Funciona
Muy Fácil de instalar, Gracias

Is there anything to do with bootloader unlock before using this twrp flash method?

Yash1th said:
Is there anything to do with bootloader unlock before using this twrp flash method?
Click to expand...
Click to collapse
Just unlock bootloader and do this

oem unlock karna hai yaa fasboot flashing unlock karna hai ya directly twrp flasher ko use kar sakte hai ki nhi I'm cunfused help me