Hey guys,
This morning i was running an s8+ ported rom on my 935f s7 edge. I wanted to go back to stock so I launched Odin and flashed using a stock firmware, that had the PHN CSC. All seemed to be working at first, until i tried to install TWRP again. I got TWRP on, and tried to flash CSC to Tmobile USA. When I did so the phone now permanently goes to the Samsung Galaxy S7 screen, waits a second, then reboots and does it again in an endless loop.
So I thought "okay, lets do this all again". However, upon trying to flash now, I get an error in Odin and it reboots.
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1203)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
Now I am in trouble, i feel. My phone can boot into TWRP recovery, However that is all, and when it does it will not mount internal storage.
What can I do?
Thanks!
Try formatting all the partitions and force mount them.
Install latest supersu.zip from twrp and try flashing again using odin
Try running odin as administrator.
Related
UPDATE: I switched USB ports and it seems that it's now flashing...standby
UPDATE 2: All fixed.
Unhide for original post:
I think I need a bit of help. So last night busybox updated to the latest version (from the app). Now today when I go to start up my phone it starts up, but stays on the Galaxy S3 logo. I can boot into CWM recovery and download mode just fine. So I was attempting to flash (via Odin) back to stock so I could start fresh. I was following the advice from here: http://forum.xda-developers.com/showthread.php?t=1840030. And the bootchains flashed fine, but the root66.tar keeps failing.
This is the log I get:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_VZW_I535VRBMA2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What am I doing wrong?
Also I was running a older build of SynergyROM if that's of any use.
My friend has a Samsung GT-S6102 and he tried to flash a custom firmware without pre-rooting the phone. The phone was stuck in bootloop and he gave the phone to me for repair because I have been flashing phones like my Xperia mini pro and Samsung Monte, etc.
However, this is the first time I had to use Odin to do something like this. As per my experience so far, the most difficult part is to find the right firmware for this phone (I require the Indian firmware). So, after lots of brainstorming in the XDA forum I flashed these files (a) BOOT_S5360DDKK1_REV05.tar (b) torino_1205.pit (c) PDA, Phone and CSC files from S6102_DDMC1_ODDMB1_DDMC1. Now after successfully completing the flash process the phone still goes to bootloop and the Samsung Galaxy logo appears upside down (mirror image). I am attaching the screenshot here for your reference. Moreover, I cannot view the download mode because of white screen when I press volume down+home+power keys. But I can still reflash following the steps as it would if it was normal.
Here's the odin flash log.
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S6102_DDMC1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_S6102_DDMC1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_S6102_ODDMB1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> BcmBoot.img
<ID:0/008> NAND Write Start!!
<ID:0/008> boot.img
<ID:0/008> param.lfs
<ID:0/008> system.img
<ID:0/008> userdata.img
<ID:0/008> BcmCP.img
<ID:0/008> Transmission Complete..
<ID:0/008> Now Writing.. Please wait about 2 minutes
<ID:0/008> Receive Response from boot-loader
<ID:0/008> csc.rfs
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!
<ID:0/008> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Any help would be greatly appreciated. Please note that this phone is not rooted so can't go to CWM either.
So, frustrating... somebody got to have a way to revive this bricked phone.
Can somebody tell me how to root and to flash a custom kernel on an already bricked phone.....?
From the screenshot it shows that the odin version is not correct (Its for galaxy grand)
Try using Odin 3v1.8
For firmwares
Go here
Sent by typing by my fingers
@AMIT
Thank you very much for your reply Amit but I'm afraid that it's not going to work either. I've also used the older version of odin the one that you mentioned but with no luck. My only chances are if I can somehow alter the root permission and flash a custom kernel and then flash a new rom. However, I've searched many forums but nobody knows anything about rooting an already bricked phone.
It's quite easy otherwise to root a phone that's in a working condition. So sad...
Anyways, thanks a lot buddy....
Withe Screen on GT-S6102
Hello people
I'need a little help
I was trying to apply a monster rom to my girlfriend galaxy y duos.
Then it reboot and I could see the Monster boot animation but with the picture all mess up.
Then I enter in to Recovery mode an the menu was also mess up.
finaly I could enter with the odin 3 an flash the CSC_S5360_ODDLK1 pack (3 files)
then After reboot all I have is a with screen.
I can go in recovery menu or download menu, at least that I see, because all I see is a the withe screen
Can somebody help to riveve this brick
Thanks
Just tried to flash my SM-G920X It's a demo version of the S6.
( No calling. I'm ok with this it's not my problem)
Because it had the retail mode software installed that is a nuisance. I tried to flash over it many times. The retail mode locks the bootloader and can't be removed, its an administrator. wiping with android device manager just returns to stock+retailmode. retailmode documentation now says it can never be removed.
recovery mode wipe is forbidden.
cfautoroot and twrp both fail - its the retailmode lock
I tried flashing with G920FXXU1AOE3_G920FXEU1AODQ_XEU.zip with the *Phone bootloader update* ticked. It's a full unbranded rom from sammobile. It should have a bootloader?
It replaced the bootloader!!!!
Then hung. reboot phone.
"An error has occurred while updating device software. Use Emergency recovery function in Smart Switch PC software."
I can't. it demands a code from the programs last try when the update failed. Or you can try to use the sim registration serial number online check. But I no have sim! It's not registered. (it is not stolen I've already had a back and forth with samsung email serial number check. I got it from ebay)
Cannot power off! stuck on either download mode or emergency warning. Both bright blue/green whole screen. left it plugged in last night so it didn't drain the battery flat. Was very very hot this morning. I put it in the freezer for half an hour.
Think I can still use odin. It says added. I can still get it into download mode.
Just need to totally reflash the thing. But with what???
when I try to reflash bootloader I get...
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AOE3_G920FXEU1AODQ_G920FXXU1AOE3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
when I try normal odin whole flash of the ....XEU It just hangs here...
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AOE3_G920FXEU1AODQ_G920FXXU1AOE3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
Holy ****! There is something very wrong with the way odin deals with these things.
I just copied out the recovery.img file from the stock rom I've been trying to flash. Copied it over the one in here twrp-2.8.6.0-zeroflte.img.tar as suggested by this post. http://forum.xda-developers.com/galaxy-s6/help/solved-stuck-download-mode-failed-odin-t3104736/page2
I have recovery back!
This is an odin **** up as he says.
reboot. exactly where I was retailmode still there account still there.
quatzar said:
Holy ****! There is something very wrong with the way odin deals with these things.
I just copied out the recovery.img file from the stock rom I've been trying to flash. Copied it over the one in here twrp-2.8.6.0-zeroflte.img.tar as suggested by this post. http://forum.xda-developers.com/galaxy-s6/help/solved-stuck-download-mode-failed-odin-t3104736/page2
I have recovery back!
This is an odin **** up as he says.
reboot. exactly where I was retailmode still there account still there.
Click to expand...
Click to collapse
me facing almost same situation, I want to remove demo crap from it, so I just root it as my first step but now phone is hang on Galaxy S6 live demo unit, I try to flash your recovery but I was not much lucky so please can you give some tips to solve issue, thanks
I rooted my Girlfriends S7 Edge and when she restarted, it went into a boot loop. I have used every option in oden except autostart,Flash lock, and deviceonfo. I want to return to stock. G935T
this if from standard options using only AP
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_TMB_G935TUVU1APB6_G935TTMB1APB6_CL7103056_QB8543665_REV02_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone screen says:
SW REV CHECK FAIL : [aboot]Fused 4 > Binary 1
It looks like you're trying to flash a firmware which is older than the one installed. Try to find latest firmware.
It was running 6.1 then went custom shoudnt i be able to flash same version?
rhettc2 said:
It was running 6.1 then went custom shoudnt i be able to flash same version?
Click to expand...
Click to collapse
tried newest version and still same problem. Smart Switch and kies wont even recognize the phone. I have installed the samsung driver.
Went to samsung official site and tried download from there thank you very much!
Hello everyone,
My old phone starting to do some weird things: on power on, it doesn't respond. If I put it in charge, it reboots continuosly, by vibrating and showing the Samsung logo for a fraction of second. I don't know why.
I'm able to put it in download mode, but if I try to flash a stock rom, odin doesn't works.
I downloaded this rom from sammobile: G355HNXXU0AQA1_G355HNITV0AQA1_G355HNXXU0AQA1_HOME Italy Android 4.4.2
Putted into Odin 3.13 in the section AP, I tried to flash but the message was "There is no PIT Partition". Options enabled: "AutoReboot, F.ResetTime".
Second attempt: Options enabled: "AutoReboot, F.ResetTime and Re - Partition", same firmware. Result: operation failed.
Third attempt: changed the cable and the firmware, with: G355HNXXS0APH1_G355HNITV0APF1_G355HNXXU0APE1_HOME
It doesn't works. My log is:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 1105 M
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
No pit file used during the procedure, only the firmware as AP.
Any help?
Thanks in advance
UP! Please, nobody?
Same problem
My odin do the same!!! Please help