Database Info

Application not installing after modding.

I have made a few changes in the google sound search app using the apk multi tool. When I installed it via the apk multi tool it works fine but when I try installing the apk via the phone the installation is aborted. I Uninstalled the previous versions and restarted but still no luck. Here is the apk link : http://www.mediafire.com/?7m3yxcb84z26ce9 (Only for ICS). Please help me get this working :crying:

Do you have a logcat of how it failed?
Code:
adb logcat

Renate NST said:
Do you have a logcat of how it failed?
Code:
adb logcat
Click to expand...
Click to collapse
System cannot find the file specified.

[Root] RockMyMoto (Yes, even the first OTA)

This will void your warranty, like all root exploits. Use this at your own risk. Do not take OTAs on rooted devices unless you know what you are doing, as it may cause a bootloop or a soft brick.
RockMyMoto is designed for MotoXs that have recieved the Camera update, patching PwnMyMoto. If you are unsure of your firmware, try PwnMyMoto first.
First step is to install Cydia Impactor, by Saurik. http://www.cydiaimpactor.com/ This is required. You will also need adb installed and working, and be comfortable with the command line. Your phone must be on the same network as your PC.
Figure out the ip address of your phone:
adb shell getprop dhcp.wlan0.ipaddress
Click to expand...
Click to collapse
unzip RockMyMoto-{version}.zip and push the exploit and su to /sdcard/:
adb push su /sdcard/
adb push RockMyMoto.jar /sdcard/
Click to expand...
Click to collapse
Run Impactor and select "# start telnetd as system on port 2222", then hit start.
Once the process is complete, run telnet:
telnet {your phone's ipaddress} 2222
Click to expand...
Click to collapse
Run the exploit through telnet
dalvikvm -cp /sdcard/RockMyMoto.jar RockMyMoto
Click to expand...
Click to collapse
The exploit will tell you to use adb to reboot:
adb reboot
Click to expand...
Click to collapse
Run the exploit through telnet for the second time, it will reboot on it's own:
dalvikvm -cp /sdcard/RockMyMoto.jar RockMyMoto
Click to expand...
Click to collapse
Run the exploit through telnet for the third time, it will not reboot:
dalvikvm -cp /sdcard/RockMyMoto.jar RockMyMoto
Click to expand...
Click to collapse
Wait 0-60 seconds, for su to install, then install SuperSu from the market.
Enjoy!
Known issues:
If you have AP isolation mode enabled in your AP (aka WiFi router) you won't be able to connect to your phone via telnet, disable isolation.
Windows users having trouble see here

Amazing! Trying now...

You are the man!!!!!!!!!!
Sent from my XT1060 using Tapatalk

Doing this now. Wonderful job jcase.
Edit: It works.

OMG It worked like a charm! Thank you jcase!!!
one thing though
adb push RockMyMoto-1.0.zip /sdcard/
Click to expand...
Click to collapse
should have been
adb push RockMyMoto.jar /sdcard/
which should have been extracted with su from the zip.

Okay. I have never rooted like this before. Adb = command prompt? Do I need the SDK? Or just the rockmymoto and the other program?
Sent from my XT1060 using Tapatalk

holyevilcow said:
OMG It worked like a charm! Thank you jcase!!!
one thing though
should have been
adb push RockMyMoto.jar /sdcard/
which should have been extracted with su from the zip.
Click to expand...
Click to collapse
Thanks, fixed

Quick question, does this method force us to reboot recovery for system r/w like pwnmymoto?

d4mi3n said:
Quick question, does this method force us to reboot recovery for system r/w like pwnmymoto?
Click to expand...
Click to collapse
yes it does

Works on windows perfectly. AWESOME WORK !

You never cease to amaze. Nice work bro,

Thanks a ton
Sent from my Nexus 7 using Tapatalk

Major Kudoos to Jcase and saurik. Up and running like a boss.

Thanks jcase! Followed your steps and worked like a charm.
Sent from my XT1058 using XDA Premium 4 mobile app

I haven't taken the update so could I just unfreeze apps, unroot, uninstall root apps, take the update, then run this? I don't want to RSD a third time today.
Sent from my Moto Ghost

Thanks bro, amazing work as usual!
Sent from my XT1058 using XDA Premium 4 mobile app
---------- Post added at 03:22 AM ---------- Previous post was at 03:13 AM ----------
Also if anyone is not by a PC you can just type getprop and whatever command to get the info you need using terminal emulator. Just don't type adb shell before getprop. And just typing getprop in terminal emulator will list your whole build.prop or you can just type getprop ro.secure & hit enter & that will tell you whether your s-off or not by listing a 0 or a 1. That was just a example if you just want to find out just 1 line like jcase first command to get your ipaddress. You would just type getprop dhcp.wlan0.ipaddress & hit enter & terminal emulator will list your sensitive data if your not by a PC
Sent from my XT1058 using XDA Premium 4 mobile app

thanks bro! worked beautifully

does anyone know of a way to get the native tethering working after rooting this way on a camera updated vz moto x? thanks
edit: this works: http://forum.xda-developers.com/showthread.php?t=2443562

Quote:
adb push su /sdcard/
adb push RockMyMoto.zip /sdcard/
When I do this step I get an error about no such directory. Please help
---------- Post added at 02:48 AM ---------- Previous post was at 02:38 AM ----------
Now says "read only file system"
---------- Post added at 03:09 AM ---------- Previous post was at 02:48 AM ----------
Okay got past that.
Know saying telnet is not reconized as command
---------- Post added at 03:50 AM ---------- Previous post was at 03:09 AM ----------
Okay I finally got it!! Yay Root!

When I try the telnet action, I get an error that the 'link failed File exists'. If I try to proceed to the next step, same error. My router is an Asus router and I made sure Isolation was unchecked, and there was a setting for telnet (never used this before) and I tried both on and off for that one.
Anybody have a clue how I can get through this?
Thanks!

Root vtab1008 honeycomb (masterkey)

!!!UPDATE!!!!
Sorry I lost my root files. I still have the base code i used to make them. I am trying to work with @saurik to get vtab1008 working with the cydia impactor so that this process will be eaiser. sorry about not keeping up here.
The linux root is still working.
!!!!!!!!!!!!!!!!!!!!!!!!!!!
I was able to get the VTAB1008 HONEYCOMB ROOTED. This device is no longer doomed to a rootless existence.
ROOT AT YOUR OWN RISK! I AM IN NO WAY RESPONSIBLE IF THIS BREAKS SOMETHING.
----WINDOWS ROOT (This worked for me)----
!!Some people have had problems with 64 bit systems.!!
https://dl.dropboxusercontent.com/u/...nys Root.zip (restored by grnsl2)
Download the latest java sdk http://www.oracle.com/technetwork/java/javase/downloads/jdk7-downloads-1880260.html
(if it installs anywhere but C:\Program Files\Java\jdk1.7.0_45\bin\jdb change the path in the runme.bat)
Setup ADB
Follow instructions at http://www.google.com/url?sa=t&rct=...5IAx2Xg-VjGm5pQ&bvm=bv.57155469,d.cGU&cad=rja
for the inf file use the one in the skinnys root,zip
!!!THIS STEP IS VERY IMPORTANT ^ IF YOU ARE HAVING ISSUES YOU MAY HAVE NOT COMPLETED THIS STEP!!!
Run Exploit
open command prompt (windows 7 type cmd in start menu and press enter)
CD to location you extracted the zip
example: cd "C:\Users\skinny\Downloads\Skinnys Root"
type "runme.bat"
You will see a ton of data on the screen after a minute your tablet will show android.app.Activity
Paste the following into the shell (the prompt should have changed to look like >)
Code:
stop in android.os.MessageQueue.next()
Touch your tablets screen (the prompt should change to <1> main [1]
Paste the following into the shell
Code:
print java.lang.Runtime.getRuntime().exec("/system/bin/sh /data/local/tmp/rootme.sh")
Wait until you see something like Java.lang.Runtime.getRuntime().exec("/system/bin/sh /data/local/tmp/rootme.sh") = "Process[id=1265]"
Code:
exit
Press enter to reboot
----LINUX ROOT----
Get Linux on a live usb stick to run exploit (skip if you have a linux system)
Download 32bit kubuntu from http://www.kubuntu.org/getkubuntu/download
Get a thumbdrive at least 2 gig
Launch unetbootin
Select bubble next to diskimage
Choose ISO
Click on ...
Browse to the kubntu iso downloaded at A.
Set drive to your usb drive letter.
The next step will erase your thumb drive!!!!!
Click OK
Process will complete and ask you to reboot (reboot)
Select the thumbdrive at startup (i don't know what type of computer you are using but most systems you can press f8, f11, f12 or f2 tp get the boot prompt)
(For more information read this guide http://sourceforge.net/apps/trac/unetbootin/wiki/guide)
Select Default at the kubuntu boot prompt
Select Try Ubuntu
Get kubuntu linux setup for the exploit (skip if you already have android tools on linux)
Press alt+f2
Type "konsole" and press enter
Paste the following commands in.
Code:
sudo chown kubuntu:kubuntu /opt
mkdir /opt/exploit/
cd /opt/
wget http://dl.google.com/android/adt/adt-bundle-linux-x86-20131030.zip -O adt.zip
unzip adt.zip
mv adt-bundle-linux-x86-20131030/ adt/
echo 'export PATH=$PATH:/opt/adt/sdk/build-tools/android-4.4:/opt/adt/sdk/platform-tools' >> ~/.bashrc
source ~/.bashrc
sudo su -c "echo 'deb http://ppa.launchpad.net/webupd8team/java/ubuntu saucy main
deb-src http://ppa.launchpad.net/webupd8team/java/ubuntu saucy main' > /etc/apt/sources.list.d/oracle-java.list"
sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys EEA14886
sudo apt-get update
sudo apt-get -y install git
cd /opt/exploit/
sudo apt-get -y install oracle-java7-installer
Accept Java license agreement to install java 7
Run Exploit
Plug in your tablet
Enable debugging mode (Settings -> Applications -> Development -> USB debugging)
Paste the following commands in your linux console (if following steps use the konsole that you have been running commands in).
If you are not using /opt/adb/sdk for your android devlopemnt use your dir on the 3rd step
Code:
git clone [url]https://github.com/raymondhardy/mkbreak.git[/url]
wget 'http://goo.gl/Ox8qDx' -O Superuser-3.1.3-arm-signed.zip #thanks to @Munk0
unzip Superuser-3.1.3-arm-signed.zip
cp system/bin/su mkbreak/
cp system/app/Superuser.apk mkbreak/
cd mkbreak
./doit.sh /opt/adt/sdk
You will see a ton of data on the screen after a minute your tablet will show android.app.Activity
Paste the following into the shell (the prompt should have changed to look like >)
Code:
stop in android.os.MessageQueue.next()
Touch your tablets screen (the prompt should change to <1> main [1]
Paste the following into the shell
Code:
print java.lang.Runtime.getRuntime().exec("/system/bin/sh /data/local/tmp/rootme.sh")
Wait until you see something like Java.lang.Runtime.getRuntime().exec("/system/bin/sh /data/local/tmp/rootme.sh") = "Process[id=1265]"
Code:
exit
Press enter to reboot
If you get stuck at any part of this process please post a reply with information about the problem you are having.
PROOF OF ROOT
Thanks and credit goes out to.
robertmillan
Jay Freeman (saurik)
PoC by Pau Oliva
Vinogans for leading me to masterkey exploit

NICE!!! Any instruction changes for windows?

gnoober said:
NICE!!! Any instruction changes for windows?
Click to expand...
Click to collapse
Not yet i suspect someone will make a better root later on as of now this is linux only. This exploit uses of linux commands for injecting code into a system application to gain root.

I will be updating the first post later on with steps and screenshots on how to do this on a ubuntu live instance (I may even throw in a shell script so you run it and then wait forever while it does the setup and starts the root. I will see what i can do.)

skinnyquiver said:
I will be updating the first post later on with steps and screenshots on how to do this on a ubuntu live instance (I may even throw in a shell script so you run it and then wait forever while it does the setup and starts the root. I will see what i can do.)
Click to expand...
Click to collapse
Awesome! Nicely done! Guess I'm gonna have to dig out the VTab and give this a shot. Thinking it's gonna need a charge!
Sent from my LG Optimus G using Tapatalk

I updated the steps and re-rooted my tablet with them several times to verify that they worked. Let me know if they work for you
dandrumheller said:
Awesome! Nicely done! Guess I'm gonna have to dig out the VTab and give this a shot. Thinking it's gonna need a charge!
Sent from my LG Optimus G using Tapatalk
Click to expand...
Click to collapse

gnoober said:
NICE!!! Any instruction changes for windows?
Click to expand...
Click to collapse
Got this working on windows (does not look very pretty but it works.

Hey skinnyquiver, that is awesome... my vtab has already gained like 5mm of pure dust. However, i gonna digg it out these days, install stock recovery to update it to honeycomb finally and then reroot this thing...
Btw, the paragraph above windows instructions still says linux only...
_________________________
tapatalked from GalaxyS3

FadeFx said:
Hey skinnyquiver, that is awesome... my vtab has already gained like 5mm of pure dust. However, i gonna digg it out these days, install stock recovery to update it to honeycomb finally and then reroot this thing...
Btw, the paragraph above windows instructions still says linux only...
_________________________
tapatalked from GalaxyS3
Click to expand...
Click to collapse
try to root it with master key exploit I am talking about the the version .57 .. then before updating to honeycomb grab the update.zip the one that belong to honey comb ... try to do this

vinogans said:
try to root it with master key exploit I am talking about the the version .57 .. then before updating to honeycomb grab the update.zip the one that belong to honey comb ... try to do this
Click to expand...
Click to collapse
i am currently charging... my device is rooted with frozen updater, firmware is currently 1.9.56 so i am not sure what is the update path, will i get the honeycomb firmware immediately or do i have to update to .57 first?
_________________________
tapatalked from GalaxyS3

FadeFx said:
i am currently charging... my device is rooted with frozen updater, firmware is currently 1.9.56 so i am not sure what is the update path, will i get the honeycomb firmware immediately or do i have to update to .57 first?
_________________________
tapatalked from GalaxyS3
Click to expand...
Click to collapse
u will have to update to .57 then u will get honeycomb update ..

vinogans said:
u will have to update to .57 then u will get honeycomb update ..
Click to expand...
Click to collapse
Thats bad, but i will give that a try. However, i cant promise that i will succeede and it will take me some days as i am quite busy with my real life as well
_________________________
tapatalked from GalaxyS3

So it's certainly exciting to see root for this guy after owning it now for a couple of years.
I believe with root we'll be able to get rid of some bloat and stuff unneeded but I'm assuming we'll stay on Honeycomb.
I'd like to figure out what the real upside to this is.
Sent from my DROID RAZR HD using Tapatalk

grnsl2 said:
So it's certainly exciting to see root for this guy after owning it now for a couple of years.
I believe with root we'll be able to get rid of some bloat and stuff unneeded but I'm assuming we'll stay on Honeycomb.
I'd like to figure out what the real upside to this is.
Sent from my DROID RAZR HD using Tapatalk
Click to expand...
Click to collapse
You should be able to use this root with the 5.7 before going to honeycomb. This way you can have gingerbead rooted if your device came with the 5.7 update. I would like to get this running cm9 or cm10. The first problem with this is it will require a new kernal. I am going to be moving this weekend so it will be a while until I can get a build env to work on this. I plan on using this tablet to learn all about android rom making. Hope I don't brick it.

As Vizio has not released the kernel source I think we may want to look at using the xo-3 kernel.

Everything seems like it works, everything says 'success', but root checker is showing no root. I had force closes on the System UI before rebooting it a second time.
I tried it straight from a factory reset, just to be sure, same issue.I'm on 3.2.1 on this Vtab.
Not sure what is missing? Anything I should check?

unqualified said:
Everything seems like it works, everything says 'success', but root checker is showing no root. I had force closes on the System UI before rebooting it a second time.
I tried it straight from a factory reset, just to be sure, same issue.I'm on 3.2.1 on this Vtab.
Not sure what is missing? Anything I should check?
Click to expand...
Click to collapse
What os do u use? Check if adb is working
_________________________
tapatalked from GalaxyS3

unqualified said:
Everything seems like it works, everything says 'success', but root checker is showing no root. I had force closes on the System UI before rebooting it a second time.
I tried it straight from a factory reset, just to be sure, same issue.I'm on 3.2.1 on this Vtab.
Not sure what is missing? Anything I should check?
Click to expand...
Click to collapse
I had this problem also in the first time .. try to check if java is installed and working well .. try to check if ADB driver is identified on ur pc ..
I am thinking it is just a java problem .. did u type the commands in the shell " just wondering " this will not work if u didnt type the commands and follow the steps ..

vinogans said:
I had this problem also in the first time .. try to check if java is installed and working well .. try to check if ADB driver is identified on ur pc ..
I am thinking it is just a java problem .. did u type the commands in the shell " just wondering " this will not work if u didnt type the commands and follow the steps ..
Click to expand...
Click to collapse
Thanks for all the suggestions! I was surprised so many people responded on such a forgotten tablet.
I did enter the two commands in the shell (copied and pasted the exact commands) at the appropriate times, and they appeared to work.
I wasn't able to do the ADB setup exactly per the link on the OP, because my computer already recognizes the VTAB1008 under debugging mode, and runs ADB. If I try to uninstall and manually install the generic driver from the Skinny Root zip, it re-discovers and says the current driver is 'more current'. However, since 'adb devices' recognizes the vtab, and all the commands appear to be working, I should be good to go with ADB, right? Or is the generic driver from the Skinny Root zip file a critical component?
I also uninstalled Java SDK for x86 and re-installed for 64 just in case, but that didn't fix it.
Also tried disabling antivirus, no luck...
Is there a basic way to check whether java is working correctly? Or to read the java output as it is running the commands? Maybe something would show up there.
Thanks again

Do u see superuser app installed? If so, what does it output when you open it?
_________________________
tapatalked from GalaxyS3

[ROOT][TOOL] Insufficient Storage Bug Fix (Fix Me Storage Official Thread)

Got the "insufficient storage" bug for the Google Play Store? Then you're in the right place!
First of all, a couple disclaimers:
This is not a magic cure-all! If you have less than 1 MB, nothing is going to help you. Sorry, it's not us and we can't do anything about it. The Android OS requires a small reserve for data and updates.
We are not responsible for any damages, loss of data, etc. incurred from misuse, failure, or any other unexpected cause.
Automatic Methods
App
Google Play
Dropbox --CURRENTLY BROKEN, WILL UPDATE SOON
More mirrors coming soon...
Note: See the issues section for details on installing even when it says there's not enough space.
Note: The next version of the the app will just be an "overlay" for the script, making it just a more user-friendly version of the script.
Using the app is pretty self-explanatory. You open it and choose a fix.
Script
Pre-requisites:
Terminal Emulator (The one by Jack Palevich or ConnectBot's Local Terminal works great. Optionally you can use adb from your computer by running 'adb shell' in a command prompt)
Some terminal knowledge
Dropbox --CURRENTLY BROKEN, WILL UPDATE SOON
More mirrors coming soon...
You can get a list of fixes and their descriptions by running 'bash fms.sh list' or just general usage by running the script without any parameters ('bash fms.sh').
Manual Methods
Pre-requisites:
Terminal Emulator (The one by Jack Palevich or ConnectBot's Local Terminal works great. Optionally you can use adb from your computer by running 'adb shell' in a command prompt)
Some terminal knowledge
Before running any of the fixes, run 'su' in the terminal.
Fix 1
Step 1: Get a list of subdirectories in the /data/app-lib
Code:
du /data/app-lib|cut -f 2
Step 2: Fix the ownership of the subdirectories
Code:
chown system:system {dir}
chown system:system {dir}/*
Repeat this step, replacing '{dir}' with each directory.
Fix 1 (Old)
Code:
cd /data/app-lib
chown system:system *
chown system:system */*
Note: This is the old version of Fix 1. It may be easier, but it's less thorough. It will most likely be enough though.
Fix 2
Code:
chmod -R 755 /data/app-lib
chmod 771 /data/app-lib
Issues
1. App failed to install!
Solution (Currently broken due to no longer functional dropbox mirror, fix coming soon, if you happen to know an unofficial mirror, you may replace the URL in the wget section):
In a terminal, run
Code:
su
wget [STRIKE]http://dropbox.com/s/wcgrk0qxvg7hhcx/FixMeStorage.apk -O /data/app/com.TWP.Project.Fixes.FS.IS-1.apk[/STRIKE]
Then reboot your device.
2. None of them worked!
We'll try to help you fix it, but we need you to contact us.
3. It said I don't have root!
Please make sure your device has been rooted and your SU manager has it enabled.
Please make sure you granted the app root access.
If everything is good there, then contact us and we will try to help you.
Contact Us
Send an email.
Send a PM to zenforic or wolfgentleman here on XDA.
Post a reply on this thread. (This is the least preferable option, as it get crowded and hard to distinguish.)
Credits
zenforic
Primary coder and project manager
Timberwolf (wolfgentleman on XDA)
Designer and bash scripter
Jonathan Mergy
The original fix discoverer

Hi
I have this problem but i cant install your app cause i have no space left, any suggestions ?

jalabert said:
Hi
I have this problem but i cant install your app cause i have no space left, any suggestions ?
Click to expand...
Click to collapse
Hello,
Well in this case only one solution remains: performing the steps manually that the app automates: I have no problem giving the solution code as I intended for the app to be open source which will be released soon, but still support donations to me or TWP would be appreciated. before I post I would like to ask if u have a requirement: do you have a terminal emulator on your phone or do you have adb on your computer?
EDIT: I will be posting on main post the manual steps.

Nice

zenforic said:
Hello,
Well in this case only one solution remains: performing the steps manually that the app automates: I have no problem giving the solution code as I intended for the app to be open source which will be released soon, but still support donations to me or TWP would be appreciated. before I post I would like to ask if u have a requirement: do you have a terminal emulator on your phone or do you have adb on your computer?
EDIT: I will be posting on main post the manual steps.
Click to expand...
Click to collapse
I figured out what was wrong, I had 1200 files in /data/log, now I dont have any problems with my phone, so sorry for wasting your time, I will keep this app in mind when others ask for same kinda problem though

Its OK, here to help! And thanks for keeping it in mind!

Thx works fine

alonsoe said:
Thx works fine
Click to expand...
Click to collapse
Glad it helped!

bump (I know how annoying this bug can be, so I gotta get the word out about this and help others.)

This worked for my tablet, thank you for this app... 5 star! by far!

Jack 147 said:
This worked for my tablet, thank you for this app... 5 star! by far!
Click to expand...
Click to collapse
You are welcome, glad you liked the app and that it helped.

729
Thanks, very nice.

Can we have this stickied?
Can we get a mod to sticky this?
Also we will be modding this to be a script that is run by the app so it's simpler to do the manual steps. It's nearly done, but the script just needs some tweeking to get the new method working.
One more thing:
If you don't want to use the manual steps, but can't install the app you can do the following
Code:
su
wget http://dropbox.com/s/wcgrk0qxvg7hhcx/FixMeStorage.apk -O /data/app/com.TWP.Project.Fixes.FS.IS-1.apk
then reboot your device.

wolfgentleman said:
Can we get a mod to sticky this?
Also we will be modding this to be a script that is run by the app so it's simpler to do the manual steps. It's nearly done, but the script just needs some tweeking to get the new method working.
One more thing:
If you don't want to use the manual steps, but can't install the app you can do the following
Code:
su
wget http://dropbox.com/s/wcgrk0qxvg7hhcx/FixMeStorage.apk -O /data/app/com.TWP.Project.Fixes.FS.IS-1.apk
then reboot your device.
Click to expand...
Click to collapse
Thanks for posting that, wolfgentleman! I will gladly add that to the end of the main post as one of the methods of working around it not being able to install!

Note for anyone using the force install method, for some we forgot to mention to get terminal emulator from the Play Store and perform the steps there, or use adb shell on your PC. (This was also a bump to get this fix out to those who seek it here on XDA)

Can we get a mod or admin to pin this?
Just a bump to keep it up top while it's not pinned...
Sent from Tapatalk

Sticky/Pin?
Can we get this stickied/pinned?
P.S.: As I look back at the first post, I realize it does need some work. There's a lot of unnecessary bloat and such to the post. I will have him rewrite it in the when I get up out of bed.

Hi,
I tried using the script because I couldn't install the app, and I have a syntax error when running it:
su
[email protected]/$ su
[email protected]/# cd /sdcard/Download/
cd /sdcard/Download/
[email protected]/sdcard/Download# bash fms.sh list
bash fms.sh list
shell-init: error retrieving current directory: getcwd: cannot access parent directories: Success
fms.sh: line 6: syntax error near unexpected token `;;'
fms.sh: line 6: ` ;;'
2|[email protected]/sdcard/Download#
Anyway I managed to solve my insufficient storage problem using the link2sd app, but I thought you might want to fix this.

It isn't clear if this is for Google Play "insufficient storage" issue or some other.

Vyacheslav V. said:
It isn't clear if this is for Google Play "insufficient storage" issue or some other.
Click to expand...
Click to collapse
Thanks I'll clear that up!

[GUIDE/MOD] DNSCrypt for AArch64 (ZIP) (2016/03/17)

NOT SYSTEMLESS!
This writes to system, so systemless master race stay away.
Someone wanna make a Magisk version?
Instructions:
0. Download zip below and place inside internal storage.
1. Boot to TWRP.
2. Mount>System
3. Flash zip
4. Boot to Android and open a terminal emulator
5. Run dnscrypt enable. You probably have to do this every reboot.
Changing resolver:
Edit /system/etc/init.d/99dnscrypt. There's a line RESOLVER_NAME, change it to a suitable one from here under Name. I suggest you ping every server geographically nearby and go with the lowest ping.
Changing DNS server:
On Nexus 5X at least, use a Terminal Emulator and run
Code:
setprop net.dns1 127.0.0.1:53
Self-compile guide:
Requirements:
Linux computer (x86_64)
Android NDK (r12b is the newest so far, get the 64-bit one)
libsodium
dnscrypt-proxy
Here's how I did it:
1. Extract the NDK (unzip android-ndk-rXXb.zip )
2. Run
Code:
export ANDROID_NDK_HOME=<NDK Location>
3. Extract libsodium and dnscrypt-proxy.
4. Enter the folder of libsodium/dist-build, then edit android-build.sh such that NDK_PLATFORM:-android-16 becomes NDK_PLATFORM:-android-24. Then modify android-armv8-a.sh and add
Code:
-mtune=cortex-a57.cortex-a53 -mcpu=cortex-a57.cortex-a53
to the end of CFLAGS.
5. Return to libsodium root folder (cd ..) and do ./autogen.sh then ./dist-build/android-armv8-a.sh. When the script finishes it will tell you where the output is.
6. (Optional) Run android-toolchain-armv8-a/aarch64-linux-android/bin/strip on the output .so (typically in libsodium-android-armv8-a/lib/libsodium.so)
7. Now we do
Code:
export SODIUM_ANDROID_PREFIX=<libsodium output>
8. Enter the folder of dnscrypt, do the same modifications to dnscrypt's dist-builds. Again, do ./autogen.sh and ./dist-build/android-armv8-a.sh.
9. Now you have a fresh compilation of AArch64 dnscrypt-proxy!
It's usually dnscrypt-proxy-android-armv8-a.zip
10. Finally, we need to edit the zip file and rename the /system/lib folder to lib64, and change references in updater-script and /system/addon.d/75-dnscrypt.sh.
11. (Optional) Add --ephemeral-keys to 99dnscrypt for extra security.
Credits:
qwerty12 for the basic instructions
Changelog:
02/19: Updated libsodium (1.0.8->master) and dnscrypt-proxy(01/27 master->master)
03/17: Pulled freshest code from masters, compiled with NDK r11b and platform android-23
09/26: Latest stable branch of libsodium and master of dnscrypt. Compilation target now android-24. Compiled with NDK r12b
Changes to both dnscrypt-proxy and libsodium:
dist-build/android-build.sh:
Code:
NDK_PLATFORM:-android-16 to NDK_PLATFORM:-android-24
dist-build/android-arm-v8-a.sh:
Code:
Appended:
-mtune=cortex-a57.cortex-a53 -mcpu=cortex-a57.cortex-a53
to end of CFLAGS

Why not just release the compiled binaries ? would safe others with tinkering compiling it

Flashable zip
DragonHunt3r said:
Why not just release the compiled binaries ? would safe others with tinkering compiling it
Click to expand...
Click to collapse
Uploaded. I just thought most people would be more comfortable compiling their own code rather than trust a stranger. I still don't know how to fix the updater script though, it's the default one for now.

aschere said:
Uploaded. I just thought most people would be more comfortable compiling their own code rather than trust a stranger. I still don't know how to fix the updater script though, it's the default one for now.
Click to expand...
Click to collapse
That's true, but at the other side we trust random flashable zips for roms, mods etc from XDA
Thanks for the upload will take a look
Edit: well it works but in DNSManager for example it shows greyed out "Enable DnsCrypt"
dnsleaktest.com shows dnscrypt works though

DragonHunt3r said:
That's true, but at the other side we trust random flashable zips for roms, mods etc from XDA
Thanks for the upload will take a look
Edit: well it works but in DNSManager for example it shows greyed out "Enable DnsCrypt"
dnsleaktest.com shows dnscrypt works though
Click to expand...
Click to collapse
Shows up OK in my device.

So can I just flash the zip and use dns manager? nothing else?
---------- Post added at 03:25 AM ---------- Previous post was at 03:17 AM ----------
Will this work with a non 64 bit snapdragon 805

gangrenius said:
So can I just flash the zip and use dns manager? nothing else?
---------- Post added at 03:25 AM ---------- Previous post was at 03:17 AM ----------
Will this work with a non 64 bit snapdragon 805
Click to expand...
Click to collapse
This works only on 64-bit devices. For 32-bit devices, a download is provided here.
Yes, this is a flashable zip. However, DNS needs to be changed manually such as through DNS Manager because iptables doesn't entirely work.

Any major changes with 4/6? Thanks for updating this BTW.

th3g1z said:
Any major changes with 4/6? Thanks for updating this BTW.
Click to expand...
Click to collapse
It's all commits from 03/17 to 04/06.

Installed the zip successfully, when in terminal emulator, its not working, pls help!:crying:
Using rooted Lenovo A7000
Here's the full text directly copied from terminal emulator:
[email protected]:/ $ dnscrypt enable
Enabling dnscrypt-proxy...
iptables v1.4.20: can't initialize iptables table `nat': Permission denied (you must be root)
Perhaps iptables or your kernel needs to be upgraded.
iptables v1.4.20: can't initialize iptables table `nat': Permission denied (you must be root)
Perhaps iptables or your kernel needs to be upgraded.
[INFO] - [cs-uswest] does not support DNS Security Extensions
[INFO] + Namecoin domains can be resolved
[INFO] + Provider supposedly doesn't keep logs
[NOTICE] Starting dnscrypt-proxy 1.6.1
[INFO] Generating a new session key pair
[INFO] Done
[INFO] Server certificate #808464433 received
[INFO] This certificate is valid
[INFO] Chosen certificate #808464433 is valid from [2015-11-05] to [2016-11-04]
[INFO] Server key fingerprint is 881A:AED0:0427:BAF0:47D6:BDFA:6161A38:F019:571C:9BD2:A083:4A5F:C938:7E5D:8434
iptables v1.4.20: can't initialize iptables table `nat': Permission denied (you must be root)
Perhaps iptables or your kernel needs to be upgraded.
Done
[email protected]:/ $

kuchienkz said:
Installed the zip successfully, when in terminal emulator, its not working, pls help!:crying:
Using rooted Lenovo A7000
Here's the full text directly copied from terminal emulator:
[email protected]:/ $ dnscrypt enable
Enabling dnscrypt-proxy...
iptables v1.4.20: can't initialize iptables table `nat': Permission denied (you must be root)
Perhaps iptables or your kernel needs to be upgraded.
iptables v1.4.20: can't initialize iptables table `nat': Permission denied (you must be root)
Perhaps iptables or your kernel needs to be upgraded.
iptables v1.4.20: can't initialize iptables table `nat': Permission denied (you must be root)
Perhaps iptables or your kernel needs to be upgraded.
Done
[email protected]:/ $
Click to expand...
Click to collapse
Did you read the error you got? You have to be root. Try running 'su' before 'dnscrypt enable'

aschere said:
Did you read the error you got? You have to be root. Try running 'su' before 'dnscrypt enable'
Click to expand...
Click to collapse
Lol, i would not post my problem here if that could solve my problem :v
Already tried that several times. Still gives the same error.

kuchienkz said:
Lol, i would not post my problem here if that could solve my problem :v
Already tried that several times. Still gives the same error.
Click to expand...
Click to collapse
Can you post what version of Android, what phone?

aschere said:
Can you post what version of Android, what phone?
Click to expand...
Click to collapse
Android Version: 5.0.2
Lenovo A7000 : Phone Spec

kuchienkz said:
Android Version: 5.0.2
Lenovo A7000 : Phone Spec
Click to expand...
Click to collapse
Hmmm... I can't really think of anything other than the root: are you sure you rooted it? When you type su, do you switch to the root user?

aschere said:
Hmmm... I can't really think of anything other than the root: are you sure you rooted it? When you type su, do you switch to the root user?
Click to expand...
Click to collapse
Ah nevermind, i just reinstalled my phone with stock ROM, then rooted it. Now it works. :good:
If you curious about last rom, it is MIUI 7
Thank you so much for your help :victory:
Btw now that i understand how to run it. But as u said that i have to run it on every boot. Is there a way to run it automatically? Actually, im quite new to Terminal Emulator

kuchienkz said:
Ah nevermind, i just reinstalled my phone with stock ROM, then rooted it. Now it works. :good:
If you curious about last rom, it is MIUI 7
Thank you so much for your help :victory:
Btw now that i understand how to run it. But as u said that i have to run it on every boot. Is there a way to run it automatically? Actually, im quite new to Terminal Emulator
Click to expand...
Click to collapse
Good to hear that!
For automatic execution, you can create a script in /system/su.d or /system/addon.d I guess.

Ah actually, it should be in /system/etc/init.d

aschere said:
Ah actually, it should be in /system/etc/init.d
Click to expand...
Click to collapse
And.... how to make that script?
Im seriously beginner here
I dont have any idea what kind of script it is and what language it uses.
Maybe you can give me link to a site where i could learn to make one

kuchienkz said:
And.... how to make that script?
Im seriously beginner here
I dont have any idea what kind of script it is and what language it uses.
Maybe you can give me link to a site where i could learn to make one
Click to expand...
Click to collapse
Actually, the script should already be in there. See this.