[help] rk3188 recovery fails to update/brick - MTCD Android Head Units Q&A

hi guys. hope you can help me. i had to replace a screen from a mtcd rk3188 unit. after that, i factory reseted. the unit became unusable because of FC's when booting up.
ive downloaded malasyk rom last version, but when in recovery, i it apply from usb and clear all, and i get messages installation hctextcfg aborted, mcucfg aborted, mcuimg aborted and updata fail...
tired usb and sdcard and its the same...
any help would be apreciated. thanks

Related

[Q] Aml8726-mxs stuck on loading screen

Hi,
i have Dmtech tablet 1032dc. I have not tried to flash, upgrade or anything, it just wont work anymore. Last time it worked was everything ok, was shutted down properly and placed in a box.
Now it is stuck on load screen, i have tried factory reset, sometimes it freeze on formatting data, other times it finishes wiping data. But after restart boot logo hangs as before. I have tried to connect to pc with a usb cable but it wont show any devices in device manager (only if is turned on and stuck in loading animation it shows 2 removable devices as partitions, who cant be accessed). Tied Win xp and win 8.1.
CPU: aml8726-mxs 1,5 Ghz
Android 4.1
Recovery system is original
What steps should i take next in order to make it working again?
All i can think of is to flash original firmware with sd card, but i cant find any roms of this device. Pls help.
firststepsandroid said:
Hi,
i have Dmtech tablet 1032dc. I have not tried to flash, upgrade or anything, it just wont work anymore. Last time it worked was everything ok, was shutted down properly and placed in a box.
Now it is stuck on load screen, i have tried factory reset, sometimes it freeze on formatting data, other times it finishes wiping data. But after restart boot logo hangs as before. I have tried to connect to pc with a usb cable but it wont show any devices in device manager (only if is turned on and stuck in loading animation it shows 2 removable devices as partitions, who cant be accessed). Tied Win xp and win 8.1.
CPU: aml8726-mxs 1,5 Ghz
Android 4.1
Recovery system is original
What steps should i take next in order to make it working again?
All i can think of is to flash original firmware with sd card, but i cant find any roms of this device. Pls help.
Click to expand...
Click to collapse
You may find a solution here [Q] Help unbrick AMLogic aml8726-mx tablet by Futaba0rus
Because there is not a specific forum for your device, this thread will be moved to general/help
sd_shadow said:
You may find a solution here [Q] Help unbrick AMLogic aml8726-mx tablet by Futaba0rus
Because there is not a specific forum for your device, this thread will be moved to general/help
Click to expand...
Click to collapse
Thanks for reply. Anyway i already fixed it, tablet is booting now. Lots of information on this forum, good job guys
firststepsandroid said:
Thanks for reply. Anyway i already fixed it, tablet is booting now. Lots of information on this forum, good job guys
Click to expand...
Click to collapse
Great, thanks for the update.
Solution ???
Please post how you fix this problem.I have the same issue and maybe others are looking for the fix too.
Thank you

(Solved)Lenovo A5500-H unsuccessful update, stuck on Android System Recovery

Hello,
I hope it is the right place to ask for help .... The automatic system update failed and now the tablet is stuck at Android System Recovery Screen. Wipe Data / factory reset does not bring the system back, so I guess I need to upload rom / update from sd card - I got option "apply update from sd card".
So, please, help me to recover from this situation as my tablet is stuck .... I do not have or could not find the right files to use with "apply update from sd card."
Or, any links to the tutorial for updating / uploading rom for this model will help ...
Thank You very much in advance.
Kindest Regards
Lukasz
I solved the problem by uploading the rom again.
1) SPF Tool + MTEK drivers for win
2) Official ROM
Just two things:
a) if SPF throws error you need to choose upgrade firmare not download
b) you need to take off the back cover and unattach the battery otherwise it will not work
Have a nice day
Lukasz
Hi !
Thanks for confirming that you solved your problem !
I will now move your thread to the dedicated section .
Cheers
Hi everyone. Just did the solution like what Luqpa_W said but my tablet is still bootlooping on lenovo screen. There is no problem during flashing and everything seems fine during flashing. I do not really understand what is the problem with my tablet. If someone knows how to deal with it, please let me know.
_____
EDITED: My tablet just got booted! After several times of reboot, it seems working. Thanks!

[Completed] Lenovo A5000 System Update Error

Hi everyone. My phone recently received a system update (A5000_S124_151118_8G_ROW_TO_A5000 S125_170112_8G_ROW). After downloading, a notice said that the device will reboot to install the new software. Phone reboots to recovery and after a few seconds in the process of installation, it stopped and said error.
Tried it a few times with the same result. I unroot the device thinking it could be the cause of the error. But it still didn't work. Will anyone help me figure this out?
Thank you.
Hi !
You must know that a rooted device and with a custom recovery can`t instal a OTA update , sometimes it doesn`t install and sometimes it bricks the device , your current status atm
Flash the stock firmware , check here https://forum.xda-developers.com/android/general/lenovo-a5000-root-recovery-roms-t3316677
Good luck !

Bricked MTCD MX unit after upgrade rom

Hi,
My device,
Mtcd Mx
A-Media
Rk3188
Lollipop 5.1.1
i upgrade my Hu from 1.3 @hal9k to hal9k’s 7.1.2 nougat, everything went fine. Bootup successfuly. While looking settngs page “power off” warning came and after that restart it self, then stuck on nougat logo. Nothings happening just stuck. After i manage a sdcard with sd firmwaretool to downgrade 5.1.1 with stock 5.1.1 dupdate file. Hu stuck on lollipop boot logo no matter what i do.
Things that i tried
With @hal9k 7.1.2 bootable sdcard i can get into Nougat recovery menu, tried clean wipe cash, factory reset options and finally update again, there is no solution still stuck nougat logo.
With stock rom(5.1.1) bootable sdcard i cant get into lollipop recovery menu. Stuck on lollipop boot logo. Tried eject the sdcard as soon as possible when lollipop appears many time, doesnt work.
i never update dmcu, it is same as it was.
İ thing it is bricked, please ineed some advice, i m very sorry for beeing such despered
Edit: i apply this method to flash som with;
1- stock dupdate.img. Flshing succesful but stuck on boot again.
2- flash with sdupdate file of stock dupdate.img. Flashing succesfull but stuck on boot again.
Tried both files doesnt work. İ cant even get in recovery mode.
https://forum.xda-developers.com/and...h-som-t3766892
————
İ thing i need to try flash mcu and will buy a stlink adaptor. Try to flash mcu soon.
Any recommendation?
Edit2; (day2)
i can still get into recovery menu with hal9k 7.1.2 nougat sdcard,
But sdcard with stock rom still doesnt get into recovery mode.
------------------------------
Still there isnt any advice, waiting for your
edit3:
installed ubuntu to laptop
used rkflashkit and upgrade_tool
erase all nand partitions one by one with rkflashkit
lowformat by upgrade_tool
upgrade firmware by upgrade_tool
still no change on condition.
all succeed but on loader i get following error on ubuntu, but on windows didnt give error.
error was
[email protected]:~/utils$ sudo ./upgrade_tool ul loaderr.bin
[sudo] password for erhan:
Loading loader...
Loading loader failed!
Click to expand...
Click to collapse
but as i sad i use windows android tool for flash loader with no error.
is it hard bricked?
——————————————
Edit 4;
i flash the mcu by stlink method,
Success fully flashed mcu chip.
Conclution;
Nothing changed, it doesnt work no matter i do.
This is my last post about unbricking operation.
İ gave it to dealer this morning, they will send it repair. i will write the conclution.
will it live or die? Coming soon!
Many many thanks to everyone who read entire post
Vote your guess down here, will it came back to life or die and rest in peace
Need advice
Sadece_erhan said:
Need advice
Click to expand...
Click to collapse
Would demanding it motivate others to help?
What have you tried and from reading the forums, identified what the options might be?
marchnz said:
Would demanding it motivate others to help?
What have you tried and from reading the forums, identified what the options might be?
Click to expand...
Click to collapse
i dont understand why it always gets in recovery mode with the sdcard which already bricked the unit.
understandings from readings
it doesnt get into recovery mode because it stucks or something went wrong on previous update.
To get in recovery i remove som from board, prepare a cable with 10k and 20k resistors. measure 3.2v from cable. And attach the usb cable pins to som’s related pins. Pc recognise the som, run the rk tool app, load stock 5.1.1 rom. And click restore button, succeed the restore succesfully. Plug the som back to board, push the reset button. it stuck on boot lollipop logo again. İ i tried to restore both dupdate.img and sdupdate.img by one by. Doesnt work.
The only thing that work is the hal9k’s nougat 7.1.2 rom’s sdupdate.img. İt takes recovery menu, i can wipe data, wipe cash , update mcu and update firmware. (Update firmware option only updates nupdate 7.1.2 version which is stuck on boot logo again)
i will flash mcu tomorrow by stlink method. i think mcu is fine. it wont work again.
İ create sdcards with Rockchip Create Upgrade Disk Tool v1.46 (SDBOOT 2.12)
update,
remove som, take it to maskrom mode.
with tool androidtool 2.3
eraseflash
lowerformat
upgrade firmware.
it doesnt work still.
i guess i need fully erase nand partitions and make it as virgin . but how?
installed virtual machine and ubuntu to fix by rkflashkit but, it cant recognise usb

TIME2 tablet (tc1051g) any expirience with it & why it sucks having it :D

I need rom for this piece of tablet or any that might work with this model tc 1051g, its stuck on android booting even after hard reset (wipe all...) in recovery mode. When I scanned for errors, it showed 3 errors (3 invalid files). Any suggestion or help is appreciated.

Categories

Resources