in stock rom when i try to make a call or have incoming call the screen go black even if wave my hand infront the proximity sensor its not turn on...but if i flash the SONY Z5 STYLE V4.6 its work fine...how i can make it work fine in stock rom?
Related
My proximity sensor always show 0.0cm and the screen is always black when I make a call.
I have tested 2 different ICS stock roms (XXLQ9 and ZCLPD) (flashed with odin), and about 5 different custum rom (CM10.1,Rootbox ...). I did 3 wipe between every rom and nothing works. When this problem started my screen start to "leak light" and every pixel became "bigger", now the screen is good again but the proximity sensor still doesn't work. Now I wonder if it's a hardwear problem and if it's possible to diasable proximity sensor during calls in CM10.1.
Are you using a screen guard? If you don't mind then try if removing the screen guard solves your problem.. That way you'll know if the sensor is dysfunctional or something else..
From my CM10.1 powered galaxy R
The Tampered, Unclocked, S-Off, Cid-11111111, HBoot 2.22, Rooted HTC One Mini that I have doesn't ring when Proximity Sensor reads "NEAR".
I'm aware of Sense 6 options like "Ring louder when in pocket" but none of them worked on making the phone ring when a call is received.
That happened when the phone was completely stock, so recently I went through all the process of S-Offing it to install a new Rom. I choose the latest Insert Coin 5.0.8, but the problem persists. so now I'm almost certain it's an hardware issue...
The phone has several years old and returning it for repair/replaced isn't really an option.
Since I'm giving this phone to my mother, I really need it to ring and vibrate when someone calls her or else she'll never pickup any calls with the phone in her purse.
I've tried installing Xposed Framework to have a try at the sensor disabling app, but the whole rom crashed badly and I needed to reinstall everything.
Other usefull info:
Kernel: [email protected] [email protected] #1 SMP FREEMPT
Is there a way to override proximity sensor when a call is received and/or making the phone ring regardless of proximity sensor state?
Looking foward for an expert tip. Thanks.
I've installed "[ROM][M4 - 4.14.401.1] Official Stock Sense 6 Rom v3 & Firmware" from xXminiWHOOPERxX -> Installed xPosed -> Sensor Disabler
Then I tried to Disable Proximity, Disable Light sensor, Mock Proximity to FAR, Disable both proximity and Light, Block Call app from accessing Proximity....nothing worked: Meaning the sensors still function normal...
BUT then I noticed something strange:
Running "Sensors Test" app,
IF I put my finger just over light sensor -> proximity reads "NEAR"
IF I put my finger just over proximity -> proximity reads "NEAR"
....Meaning that the light sensor is acting as proximity!
My next step was to identify which "dot" was the light sensor, since both acted as proximity and I used some black tape covering one of the sensors (that I've identified as the proximity)...and now the proximity sensor always reads "FAR"!!
To be sure it wasn't xPosed doing the trick I reset all things to normal and uninstalled everything...and with the black tape covering the sensor it still reads "FAR" thus resolving my issue of the phone not ringing when a call is received...
I now have to figure out if painting the sensor black has the same result, because tape looks ugly. I'll make a vídeo and post the link here.
I have tried every single ROM on this Forum for Moto G 2015 Osprey 1GB version. However I am having same issue on evry ROM . Often I recieve a call my screen goes blank and I am not able to answer the call . Also when dialling out my screen goes blank after pressing dial . As a result I am not able to put teh call to loud speaker or use any other in call options . Can some please help me how to fix the issue . (I know work around to use Power Button to end calls and Volume to answer calls however that doe snot suite me as I ended up answering few calls which i did not wanted while mobiel in my pocket ).
Things I have done so far
I have tried this with both a screen protectoron and now have taken screen protector off . Issue still there
I have a a backup of orignal Motoroal ROM and this issue does not happen on orignal ROM
I have installed Nano gapps to make sure I have unough RAM free issue still there
I have tried most of the ROM 7.1.1 and even 6.0.1 all ROMS including Cynogen mod+ Lineage 13 and 14, ressurection remix, AOPS . Experience, Slim, AOKP, Cosmic , AOSP extended and list goes on and on but issue is still; there
Is there any specific reason for this issue ?
Is this to do with RAM, Sensor or custom ROMS issue ?
Is teher any way to turn teh sensor off which turn screen off whiel in a call and when i take mobile near my face (I am thinking if sensor incorrectly so wanst to check if turning thsi off makes any difference )
Can anyone please help
So your proximity sensor is acting up... are you on current baseband and firmware? I would suggest flashing the latest factory image completely via fastboot, verify operation of the proximity sensor, then flash your ROM again. A backup and restore in TWRP of stock is not sufficient to update firmware.
acejavelin said:
So your proximity sensor is acting up... are you on current baseband and firmware? I would suggest flashing the latest factory image completely via fastboot, verify operation of the proximity sensor, then flash your ROM again. A backup and restore in TWRP of stock is not sufficient to update firmware.
Click to expand...
Click to collapse
Thanks acejavelin you are always helpfull. I know how to flash Stock Formware however How can I verify operation of the proximity sensor?
I have found a copy of orignal firmware under XDA thread however I am not sure whether it is up to date firmware or not . How can I confirm if this is up to date firmware ?
https://forum.xda-developers.com/2015-moto-g/general/index-moto-g-factory-firmware-images-t3169639
Retail UK (1GB) - XT1541_OSPREY_RETGB_6.0.1_MPI24.107-55-2_cid7
Can you please help on this bit
chungomungo1 said:
Thanks acejavelin you are always helpfull. I know how to flash Stock Formware however How can I verify operation of the proximity sensor?
I have found a copy of orignal firmware under XDA thread however I am not sure whether it is up to date firmware or not . How can I confirm if this is up to date firmware ?
https://forum.xda-developers.com/2015-moto-g/general/index-moto-g-factory-firmware-images-t3169639
Retail UK (1GB) - XT1541_OSPREY_RETGB_6.0.1_MPI24.107-55-2_cid7
Can you please help on this bit
Click to expand...
Click to collapse
Just take the newest one there... Best you can do.
As far as testing the proximity sensor, make some calls and have someone call you... You can try a sensor tester app like https://play.google.com/store/apps/details?id=com.mtorres.phonetester too
Brilliant , Thanks alot . will try that
FACING EXACTLY SAME PROBLEM ON XT1550
I have a common problem in all ROMs I'm installing . whenever I answer a call or dial a call my screen goes off as if proximity sensor is activated and doesn't turn on even when I take it away from my ear or press my power button. Screen doesn't turn on at all during call.
Phone remains fine for a day or two after I wipe cache etc from recovery but again the problem starts. This happens in all custom roms and also in rooted stock ROM. My device is XT 1055.
Kindly suggest any solution as it causes lot of inconvenience.
abhishekturumella said:
FACING EXACTLY SAME PROBLEM ON XT1550
I have a common problem in all ROMs I'm installing . whenever I answer a call or dial a call my screen goes off as if proximity sensor is activated and doesn't turn on even when I take it away from my ear or press my power button. Screen doesn't turn on at all during call.
Phone remains fine for a day or two after I wipe cache etc from recovery but again the problem starts. This happens in all custom roms and also in rooted stock ROM. My device is XT 1055.
Kindly suggest any solution as it causes lot of inconvenience.
Click to expand...
Click to collapse
There is only one fix. find where is proximity sensor, usually it is on the top near front camera . when ever screen goes blank dry your thumb and clean screen with teh thumb where proximity sensor and screen will wake up .
Also you need to keep you pockets extra clean. It is better if you can hoover inside them as most of the time I noticed there was a little dirt always on my screen when screen went blank. I am noit sure if my mobiel screen has gone very catchy to dirt after 1 year use
I intially though iut was due to custom ROMS and I have gone back to stock ROM and recieved two motorola security updated still issue is there so this is not because of the ROM .
Try this
Goto settings and search default from the search button then select phone app and set the default app.
Just saw this and thought I'd try Phone Tester. covered or uncovered, my proximity det always said Far. I tested phone by making a call and then covering it and the screen immediately went black. I would suggest that some screen protectors might interfere a bit but you've already taken that into account. Note where it is (on my xt1540 top just right of ear speaker) and make sure surface is clean. Otherwise just may be defective.
EDIT: if you feel it's "defective" You might consider replacing the screen/digitizer in hopes that that would fix it and it's not a motherboard issue.
Facing same issue
My stock rom on moto G3 2015 was working fine. Yesterday i rooted and installed tesla when this issue started. Frustrated i tried ASOP Extended and here too same issue.
It's not the issue of the sensor since Stock rom was fine till 2 days ago.
Have tried Phone notificaion settings as well.
Any updates on this or else i may have to reinstall Stock ROM
Some apps not working on all nougat roms::
1. All in one gestures app::
a.Hard keys option not working
b. screet shot not working through this app
c. Screen off not working through this app
d. volume slide bars
2. Smart screen on/ off app::
a. Swipe on proximity sensor to on/off screen not working fine.
its work only 1st 4 or 5 times bt not fully works....!!
Plz help to fix this problem....!!
For the j700h
Nougat 7.1.2 works nearly perfect
It only has mic issues.
Man I'm still waiting for the mic to be fixed. That's the only thing holding this rom down.
Because the mic won't work, video won't work that means youre camera is pretty much useless for youtube, Snapchat, twitter, Facebook, or even just taking normal video.
You cant use voice record.
& calls are all messed up.
Seems like the dev just gave up & went home, which is sad.
hey all , new z3 user here. whenever i am on a call and pull phone away from my ear u get a black screen. and i can never get to my home screen till the other party hangs up! crazy , right? did i miss something in settings or elsewhere?
any help/suggestions much appreciated.
p.s. phone is new on stock mm.
mrrocketdog said:
hey all , new z3 user here. whenever i am on a call and pull phone away from my ear u get a black screen. and i can never get to my home screen till the other party hangs up! crazy , right? did i miss something in settings or elsewhere?
any help/suggestions much appreciated.
p.s. phone is new on stock mm.
Click to expand...
Click to collapse
solved : after alot of www'ing it seems to be a hardware problem.[emoji22] but the good news is a "fix/workaround" was also discovered. well ...... works for me about 99% of the time.
DL macrodroid and add these settings:
settings > trigger > options > proximity sensor
Trigger > enable work with screen off.
-Trigger
proximity > select "far" (can try with near also)
-Action
screen on/off > screen on
-Constraints
call state > in call (macro runs when in call)
anyone having the same issue , i hope you find this post and it works for you.
p.s. sometimes when pull phone away from ear there will be a black screen , just double tap to wake (enable in settings) and the screen will come back on. [emoji1]