Database Info

Stuck at "Your device is booting now...."

Hi there
I tried flashing the "[ROM] [NXT-L29] B320 International Rooted **UPDATE 6/14/16** " on my NXT-AL10 after that, it won't get further as to the screen where it says "Your device is booting now" (Picture attached).
Installed is TWRP 2.8.7.0. I'm able to enter TWRP and Fastboot.
I also tried flashing different ROMs but I'm still stuck at this screens.
I also tried the Italian Knife tool Unbrick option.
Do you guys have any tipps?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

which firmware did u have installed before? 2.8.7.0 is not compatible with B3xx roms, u need to flash 3.0.2 for EMUI 4.1 firmwares. there is also a 3.0.2 version for EMUI 4.0 (B1xx roms), so watch out not to use the wrong one.
best thing to do now is flash a B1xx rom via fastboot and then upgrade from there...
Sent from my Huawei Mate 8 NXT-AL10

jbmc83 said:
which firmware did u have installed before? 2.8.7.0 is not compatible with B3xx roms, u need to flash 3.0.2 for EMUI 4.1 firmwares. there is also a 3.0.2 version for EMUI 4.0 (B1xx roms), so watch out not to use the wrong one.
best thing to do now is flash a B1xx rom via fastboot and then upgrade from there...
Sent from my Huawei Mate 8 NXT-AL10
Click to expand...
Click to collapse
Thank you, you were totaly right.
i just got it up and working with the guid from Germaniac:
http://forum.xda-developers.com/mate-8/general/unbrick-updating-to-b321-t3375934

good, a bricked device is never fun....

post removed by creator

Hi, I need help;
I have a GR3 2017 "PRA-LX1" latest twrp installed. I tried to install many ROMS, none worked except haky's lineage:
https://forum.xda-developers.com/p8lite/development/rom-lineageos-14-1-huawei-p8-lite-2017-t3649292
But it had many problems in the early stages so I tried his other rom, SLIM:
https://forum.xda-developers.com/p8lite/development/rom-slimroms-ng-7-1-huawei-p8-lite-2017-t3714239
It also had problems like fingerprint and cam not working "phone acted like it had no fingerprint sensor". Now problem is, since installing this ROM, every other ROM I install gives error 7 on twrp which I bypassed by editing the script file. However none of them boots, all PRA-LX1 ROMS that I have installed gets stuck at "your phone is booting now" like the OP's screen. Yet the above SLIM ROM gets installed with no error and boots just fine.
I have no one to turn to, even the ROM maker is not responding, please any help would be appreciated

hi friends I have exact this problem
my first rom was c900b180 android 6 nnd twrp 2.8 and unlocked bootloader
because dint get android 7 I try to flash it manually
1- I try to install from twrp not success
2-try dload not success
3-try fastboot use this commands
astboot flash cust cust.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system system.img
fastboot reboot
============================NOW
PHONE stay on above screen booting now.......
and twrp not installed and try to install more version
oorginal recovery not installe install in fastboot say success bot really not install
please help friends

bricked

Hi!
I've got a problem with my Mate. I wanted to update my smartphone to Nougat (My Mate is C636 B170) and I updated to B180 using Firmware Finder from Google Play without any problems. Then, I choosed B193 (I think) and something went wrong. Now i can only enter recovery, eRecovery or fastboot. My phone isn't rooted and bootloader is locked. I've tried to use rayglobe knife and SRKTool. Nothing helped. I can't flash via dload, update just doesn't start. In DC Unlocker I see, that my firmware is C900B172 (!) I don't know what to do know? Any ideas? (sorry for my English)

Unlock your bootloader and then unpack with Huawei Firmware Extractor from UPDATE.APP of B172 the following files: boot.img, recovery.img, recovery2.img, system.img, userdata.img and fastboot every single one into your device with the commands «fastboot flash boot boot.img, fastboot flash recovery recovery.img» and so on. It should be back on track.

How can I do that? I can't run my phone, so I'm not able to get Product ID and my Huawei ID that I made to get this code has only a few days. When I connect my phone in fastboot mode to PC and run DC Unlocker, there is only FRP erase and Network unlock whick is inactive.
EDIT: BTW, any B172 link? I can't find any active. My Mate is L29 of course.

Ok, I think I'm one step closer. Earlier I didn't see that there is a Mate 8 in "Select model" in DC Unlocker. Now, the problem is that when I click "Read bootloader code" response is:
Reading bootloader code...
unknown error (359)
What can I do with that?

Hello!
I'm still trying to fix my Mate. I know that flashing B320 via DC Phoenix but B320 is impossible to find :/ Can I flash any other firmware?
Now, when I reboot my device this is how it looks like :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I can enter into fastboot mode, so I believe that there is still a chance for my phone
Any ideas?

up
Can I flash any other firmware like C636B170 or any which is posiible to download? Please help, because I don't know if I can use my bricked Mate as a hammer or still trying to bring him back to life.

up
Anyone? Anything?

FirmwareFinder fail. Please help me the cheapest way to recover my phone.

I don't know why. I used erecovery with FirmwareFinder many time and it work all times.
But 1 day before, I unlocked bootloader, flash patched ramdisk.img (Magisk), and then reboot again. But then it meet bootloop, bootloader relocked, FRP lock. But this time, when I use Firmware Finder to recover, it cannot work, erecovery failed when getting package. I checked all step.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

My mate 9 is briked in i install the last firmware oreo b369... Firmware finder

Please help me! 41$ for 5 credits FunkeyHuawei is too much for me. Could I buy 1 credit to flash firmware?

Are you still having issues, if so, have you been able to unlock your bootloader and flash a custom recovery? If you have I think I may be able to help you

@shae23: Thanks. If I have been able to unlock bootloader, I don't need to creat this thread. I had to bring it to a service shop (Viet Nam), it cost about 6.5$ US to reflash firmware.

someone know what to do ?!!
I unlocked the bootloader and flashed the recovery, the system booted successfully.
I tried to flash a ROM after that, it showed errors and didn't complete the flashing. since that time the phone has bootloop.
Unlocked bootloader and FRP
fastboot oem get-build-number : MHA-L29 8.0.0.374(C185)
I can access the TWRP recovery and erecovery and bootloader&fastboot
what I have already tried :
1-Fastboot flash ramdisk and kernel .
2-Tried to flash the stock firmware via TWRP.
3-Tried HurUpdater0.3
4- Extract update.app & HOWTA
5-Flash ramdisk and kernel from inside TWRP
Update: I can not access the recovery anymore. its just stuck at stock recovery with EMUI 0%
Tried to flash stock and custom recovery, but no luck
Update 2: I somehow managed to get into recovery. recovery is good now.
BUT still no luck with booting, I feel it's something stupid that I missed

Did you try this way?
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522

didn't work

ONEPLUS 6 stuck on fastboot mode HELP!! ASAP!!

hi guys
i was running my oneplus 6 on android 11 open beta 1 oos
i recently tried to flash a magiskpatched file and now my oneplus 6 got stuck on fastboot mode. i tried to flash a fastboot rom, with the flash-all.bat method, but then my device went into quallcomm crashdump mode.
after that i tried to unbrick my phone using msm tools but when i try to connect my device through edl mode my pc or other pc, it shows this in the device manager. (maybe not recognizing?)
due to this i cannot flash stock rom through msm tool. please help me guys what should i do.
thanks in advance.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

deeptanshuB said:
hi guys
i was running my oneplus 6 on android 11 open beta 1 oos
i recently tried to flash a magiskpatched file and now my oneplus 6 got stuck on fastboot mode. i tried to flash a fastboot rom, with the flash-all.bat method, but then my device went into quallcomm crashdump mode.
after that i tried to unbrick my phone using msm tools but when i try to connect my device through edl mode my pc or other pc, it shows this in the device manager. (maybe not recognizing?)
due to this i cannot flash stock rom through msm tool. please help me guys what should i do.
thanks in advance.
View attachment 5382363
Click to expand...
Click to collapse
Please try All in One tool available in this forum.
[TOOL][OP6] TOOL ALL IN ONE (Drivers|Unlock|TWRP|Factory Image|Stock Recovery)
This is the OnePlus 6's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread TOOL ALL IN ONE ADVANCED OPTIONS FUNCTIONS Install Drivers Install Drivers Unlock Bootloader Lock Bootloader (use carefully) Flash...
forum.xda-developers.com

Question I cannot install twrp on to my galaxy a12

i tried to install twrp , root and degoogle my galaxy a12, i have no experience at all and nearly bricked my phone
i unlocked my bootloader, go into download mode, i tried flashing twrp 3.7.0 image i downloaded on the official website, it didn't work and everytime i reboot it got into download mode again
i flashed the stock rom again, go to the support thread of twrp on the galaxy 12 here, i did like the tutorial but i cannot flash the rom with the re partition and nand erase because odin will just froze and the progress bar wont appear
after that i tried flashing it like the post said. put the twrp image in the AP box, and the vbmeta.img.md5(i extracted the vbmeta.zip file since i cannot put the zip file into the box) into userdata box, then start, restarted the phone and after that it got the "An ERROR Has Occured While Updating Device Software" with the teal background, i freaked out but luckily i fixed it with the frp hijack software.
after that i'm just too scared to continue, does anyone know what i did wrong? my guess is that it's at the vbmeta file but the support post give that file only and i just extracted it and put the md5 file in the userdata box.

I assume that you flashed twrp recovery with vbmeta and you had One Ui 4.0 (Android 12) on stock. It's just that I had a similar thing when I flashed it on TWRP.
Note: WHEN YOU HAVE INSTALLED THE VBMETA AND TWRP FILE AND YOU ARE USING THE STOCK FIRMWARE THEN DO NOT LOGIN TO YOUR SAMSUNG ACCOUNT. YOUR PHONE WILL BE BLOCKED. AND WHEN TURNED ON, IT WILL PROVIDE THE FOLLOWING.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

lil_kyrick said:
I assume that you flashed twrp recovery with vbmeta and you had One Ui 4.0 (Android 12) on stock. It's just that I had a similar thing when I flashed it on TWRP.
Note: WHEN YOU HAVE INSTALLED THE VBMETA AND TWRP FILE AND YOU ARE USING THE STOCK FIRMWARE THEN DO NOT LOGIN TO YOUR SAMSUNG ACCOUNT. YOUR PHONE WILL BE BLOCKED. AND WHEN TURNED ON, IT WILL PROVIDE THE FOLLOWING.
View attachment 5789287
Click to expand...
Click to collapse
no, it is the android 11 version with the A127FXXU5AVC4 stock firmware (vietnam region) and no i didn't login to anything after unlocking bootloader, and the warning shows something like this image here
but without the 2 last line, instead it has a korean and japanese translation below that first 2 english lines
i think i messed up at the vbmeta part, i though my phone was hard bricked but i managed to fix it and flashed a the stock firmware again

Oh ****. So connect your phone to your computer and use the "Emegency Software Recovery" function in the Smart Switch program.
What was your mistake? Yes, the fact is that you have SM-A127F, and you set it for SM-125F. And you need to repair the device now, otherwise, contact the nearest service center. Here is a link to the guide you need for your device.

lil_kyrick said:
Oh ****. So connect your phone to your computer and use the "Emegency Software Recovery" function in the Smart Switch program.
What was your mistake? Yes, the fact is that you have SM-A127F, and you set it for SM-125F. And you need to repair the device now, otherwise, contact the nearest service center. Here is a link to the guide you need for your device.
Click to expand...
Click to collapse
ah i already fixed it myself with frp hijacker, thank you for your consideration

az_r08 said:
ah i already fixed it myself with frp hijacker, thank you for your consideration
Click to expand...
Click to collapse
Can you send a ss of the odin you are using and the settings?

What I assume is you need to use patched odin or you device is encrypted.