Oneplus one DEAD after putting this command in TWRP!!! - ONE Q&A, Help & Troubleshooting

Since I like flashing new ROMs on my oneplus one, one fine day after flashing it got stucked in bootloop, I checked in TWRP, and system was unmounted.( I donno how?). After hours of searching I got one XDA thread stating command "Mount System Ext4 /dev/block/mmcblk0p7" I put that command in TWRP command prompt, And my oneplus one is now dead. . . .Any help folks?
Plz note that I am unable to use fadtboot, recovery or anything. . after connection to the PC its showing hardware bricked OPO. it has nothing but a black screen (nothing ever comes on the screen, not even a boot logo), has no Recovery partition, no adb mode, and no fastboot partition. The device might be detected in Linux and you might be able to even send commands to it. In Windows, the bricked OPO should be detected as QHSUSB_BULK USB"
AS I SAID the device is not showing up on the computer, AT ALL. Under any device name.
It does not vibrate when I hold the power button for 20 seconds, it has no ADB, no fastboot, no nothing.
Pls help. . .thanks in advance
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Something similar happens to me after doing wonky flashes in TWRP sometimes. It seems bricked but continuously trying to long-press the power button a multitude of times always brings my bacon back. If it's not working for you, come back to it every 30 minutes or so.
No idea why the phone does this, but hopefully you'll eventually get it working again.
Let me know if this ends up helping you.
Sent from my A0001 using Tapatalk

ragawane2 said:
Since I like flashing new ROMs on my oneplus one, one fine day after flashing it got stucked in bootloop, I checked in TWRP, and system was unmounted.( I donno how?). After hours of searching I got one XDA thread stating command "Mount System Ext4 /dev/block/mmcblk0p7" I put that command in TWRP command prompt, And my oneplus one is now dead. . . .Any help folks?
Plz note that I am unable to use fadtboot, recovery or anything. . after connection to the PC its showing hardware bricked OPO. it has nothing but a black screen (nothing ever comes on the screen, not even a boot logo), has no Recovery partition, no adb mode, and no fastboot partition. The device might be detected in Linux and you might be able to even send commands to it. In Windows, the bricked OPO should be detected as QHSUSB_BULK USB"
AS I SAID the device is not showing up on the computer, AT ALL. Under any device name.
It does not vibrate when I hold the power button for 20 seconds, it has no ADB, no fastboot, no nothing.
Pls help. . .thanks in advance
Click to expand...
Click to collapse
Did you installed the setup.exe(drivers Qualcomm host) from toolkit(cm11s restore or color os)?

Mr.Ak said:
Did you installed the setup.exe(drivers Qualcomm host) from toolkit(cm11s restore or color os)?
Click to expand...
Click to collapse
Hello dear friend, first of all thanks for your prompt reply.
I am not sure about the setup.exe file that your talking, kindly guide.
i had installed msm8974 download tool but it ends with error 7.
Any help would be appreciated.
Thanks in advance.

ragawane2 said:
Hello dear friend, first of all thanks for your prompt reply.
I am not sure about the setup.exe file that your talking, kindly guide.
i had installed msm8974 download tool but it ends with error 7.
Any help would be appreciated.
Thanks in advance.
Click to expand...
Click to collapse
This: https://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
Please read the OP carefully.

JJohnson1988 said:
Something similar happens to me after doing wonky flashes in TWRP sometimes. It seems bricked but continuously trying to long-press the power button a multitude of times always brings my bacon back. If it's not working for you, come back to it every 30 minutes or so.
No idea why the phone does this, but hopefully you'll eventually get it working again.
Let me know if this ends up helping you.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Thanks for your reply but i can not see this working with my oneplus one.
anyway thanks again. . .

Mr.Ak said:
This: https://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
Please read the OP carefully.
Click to expand...
Click to collapse
OK i will try it again. . . .with drivers reinstalled. . . .Again thanks. . .really appreciate your time and efforts.

Does it charge?
Wysłane z mojego ONEPLUS A3003 przy użyciu Tapatalka

Lukiqq said:
Does it charge?
Wysłane z mojego ONEPLUS A3003 przy użyciu Tapatalka
Click to expand...
Click to collapse
I don't think so.

So probably hw failure...
Wysłane z mojego ONEPLUS A3003 przy użyciu Tapatalka

Lukiqq said:
Does it charge?
Wysłane z mojego ONEPLUS A3003 przy użyciu Tapatalka
Click to expand...
Click to collapse
Hello dear friend, thanks for your help. . .
My oneplus one in not charging. . .i put it on charge from 3-4 hrs but no response.

Lukiqq said:
So probably hw failure...
Wysłane z mojego ONEPLUS A3003 przy użyciu Tapatalka
Click to expand...
Click to collapse
How can a command can cause hardware failure?

Mr.Ak said:
This: https://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
Please read the OP carefully.
Click to expand...
Click to collapse
can this cammand "Mount System Ext4 /dev/block/mmcblk0p7" cause HW failure?

ragawane2 said:
can this cammand "Mount System Ext4 /dev/block/mmcblk0p7" cause HW failure?
Click to expand...
Click to collapse
I wouldn't say hardware failure,but more of a partition corruption.This happens when you don't read OP and apply your brain. :/
In worst case,that toolkit should work fine and should format partition back to normal.

Mr.Ak said:
I wouldn't say hardware failure,but more of a partition corruption.This happens when you don't read OP and apply your brain. :/
In worst case,that toolkit should work fine and should format partition back to normal.
Click to expand...
Click to collapse
Thanks for reply. Lets see how it goes. . .

Mr.Ak said:
I wouldn't say hardware failure,but more of a partition corruption.This happens when you don't read OP and apply your brain. :/
In worst case,that toolkit should work fine and should format partition back to normal.
Click to expand...
Click to collapse

Please see the image showing error message i got while using the tool,

ragawane2 said:
Please see the image showing error message i got while using the tool,
Click to expand...
Click to collapse
Can you please post a screenshot of your device manager?
Ps:Sorry for the late reply.

Mr.Ak said:
Can you please post a screenshot of your device manager?
Ps:Sorry for the late reply.
Click to expand...
Click to collapse
Hello there,
its showing as a qualcomm device after installing qualcomm drivers, previously it was QHSUSB_BULK USB storage device.

ragawane2 said:
Hello there,
its showing as a qualcomm device after installing qualcomm drivers, previously it was QHSVbulk storage device.
Click to expand...
Click to collapse
Did you launched the tool using administrator rights?

Related

LEAGOO Alfa 5

The new smartphone from LEAGOO is here, its not a high end one, but it does its job
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5.0" HD 1280*720 IPS, Capacitive touch screen
Spreadtrum SC7731 Quad core 1.3GHz
Android 5.1 OS, 1GB RAM +8GB ROM
Dual Cameras, front camera 5.0MP back camera 8.0MP
Dual SIM Card Dual Standby, Ordinary SIM Card
Support 3G/WIFI/Bluetooth/Multi-language
any test for this phone?
bob nguala said:
any test for this phone?
Click to expand...
Click to collapse
Just received it today, so first impressions only
Looks VERY nice, and strong
smooth as hell and very nice screen
Connects fast to wifi, 4g, and my BT devices are ok (BT2.1 & BT4.0)
So right now... Cool for the price
Device looks to be rootable with kingroot...
Any1 knows how to go to recovery ?
Have you tested the GPS?
How is the LEAGOO Alfa 5 performance?
Zunera M said:
How is the LEAGOO Alfa 5 performance?
Click to expand...
Click to collapse
Sorry, didn't test anything... I got a message informing me of an update and the phone is dead...
Waiting for infos from the manufacturer!!!
If you buy it, don't try to update it!!!
hello, i'm in the same condition, after a update the phone is death. i have installed a rom donwloaded from the official malaysian leagoo website but now have don't work the sim readers... it can't register to network
i have the build 1.1_20151218, may i try with a downgrade if i can find somewhere...
http://www.leagoo.com.my/support/downloads/
davide.an120 said:
hello, i'm in the same condition, after a update the phone is death. i have installed a rom donwloaded from the official malaysian leagoo website but now have don't work the sim readers... it can't register to network
i have the build 1.1_20151218, may i try with a downgrade if i can find somewhere...
http://www.leagoo.com.my/support/downloads/
Click to expand...
Click to collapse
The seller sent me a new ROM (2016-01-07) but I can't flash it...
Then send me a new phone...
Hope this one will work a bit longer
hi all! i have this phone since Feb 4th, 2016... read this forum before buy and use this phone, i didnt update the system on it. after this fatal update, the phone doesnt turn on at all? made a brick?
a question: does this phone has notification led light at the front? as i know it does, but mine doesnt work at all, even during charging. how could i fix it?
Update issue
The bug is still there?
pctv007 said:
The seller sent me a new ROM (2016-01-07) but I can't flash it...
Then send me a new phone...
Hope this one will work a bit longer
Click to expand...
Click to collapse
Ok, I contacted Legoo and they kindly (but quite slowly) helped me.
Now I flashed the phone and it's working again on 2016-01-20 update.
It's a GOOD phone.
pctv007 said:
Ok, I contacted Legoo and they kindly (but quite slowly) helped me.
Now I flashed the phone and it's working again on 2016-01-20 update.
It's a GOOD phone.
Click to expand...
Click to collapse
could you please tell us, how to flash it step by step? What application you used on the PC, and how? thanks
Please tell us how to flash
pctv007 said:
Ok, I contacted Legoo and they kindly (but quite slowly) helped me.
Now I flashed the phone and it's working again on 2016-01-20 update.
It's a GOOD phone.
Click to expand...
Click to collapse
Hi , please tell us how to flash the phone.
My IMEI has disappeared too, i loaded all tools from LEAGOO website,
but when using the flash tool for replacing the ROM, theres no way to access the phone
Support from Leagoo is a mess, but the phone is quite good !
So, in what state should the phone be, to be recognized ?
I used "normal" mode of booting, just into the operating system, having USB for data transfer on, usb debugging on - phone isnt recognized by flashtool.
Sholud it be in recovery mode or fastboot mode, when yes, how to access it ?
Thanks in advance
Sorry, I didn't see there were questions.
The way to flash is "quite" simple:
You have to
-switch off the phone
-plug the usb cable
-press vol- and power at the same time
- The phone will turn on BUT the update software will recognize it
-release both buttons as soon as the soft sees the phone or it will turn off again
- And be patient: flash took 12 minutes for me but you'll see the progress
Had to find this by myself because the support people are VERY kind, but I'm not sure they want to tell this
pctv007 said:
Sorry, I didn't see there were questions.
The way to flash is "quite" simple:
You have to
-switch off the phone
-plug the usb cable
-press vol- and power at the same time
- The phone will turn on BUT the update software will recognize it
-release both buttons as soon as the soft sees the phone or it will turn off again
- And be patient: flash took 12 minutes for me but you'll see the progress
Had to find this by myself because the support people are VERY kind, but I'm not sure they want to tell this
Click to expand...
Click to collapse
What version of ROM do you have? I have MY_LEAGOO_Alfa_5_OS1.1_20160120 from Leagoo.com.my but is so lite ...it has no ringtones no sounds no themes .Do you have any rom with the previous goodies?
Sorry, same version... But there are ringtones and sounds... I don't know about themes, as I don't use them
Ringtones and other stuff
mlojim said:
What version of ROM do you have? I have MY_LEAGOO_Alfa_5_OS1.1_20160120 from Leagoo.com.my but is so lite ...it has no ringtones no sounds no themes .Do you have any rom with the previous goodies?
Click to expand...
Click to collapse
Hi Guys, although (ring)tones seem not to be the most important for using this lovely phone, i would suggest to use one of the uncountable apps who provides ringtones and others.
Go to GooglePlay and search for "ZEDGE". There is advertising included, but for testing ist more than enough.
Have fun !
---------- Post added at 11:34 AM ---------- Previous post was at 11:26 AM ----------
pctv007 said:
Sorry, I didn't see there were questions.
The way to flash is "quite" simple:
You have to
-switch off the phone
-plug the usb cable
-press vol- and power at the same time
- The phone will turn on BUT the update software will recognize it
-release both buttons as soon as the soft sees the phone or it will turn off again
- And be patient: flash took 12 minutes for me but you'll see the progress
Hi There, another note to flashing ( also had to find it myself, didnt have a look here to note this fine advertisement
My way to flash:
- Switch off the phone
- Hold Volume - button
- Plug in the usb cable
- The phone will turn on AND the update software will recognize it
By the way, does anyone know a custom recovery for the Alfa 5 ?
When goinf into stock recovery with power on & Vol + simultanously, i get malyasian ( chinese ? ) charcters, im unablte to do something in there.
Anayone facing the same problem ? Solutions for it ?
Thanks !
Click to expand...
Click to collapse
By the way, does anyone know a custom recovery for the Alfa 5 ?
When goinf into stock recovery with power on & Vol + simultanously, i get malyasian ( chinese ? ) charcters, im unablte to do something in there.
Anayone facing the same problem ? Solutions for it ?
Thanks !
Click to expand...
Click to collapse
Hi again
Now when I want to flash, the soft recognizes the phone, but stops after 3s... any idea ?
Thanks
note: updating via wireless updating menu from leagoo os1.1 lite 2015.12.xx (i dont remeber of the day) to leagoo os1.1 lite 2016.03.22 is SAFE! i just now did it and everything is fine.
Leagoo Alfa 5 root
Hi folks, has anyone rooted his Leagoo Alfa 5 already ? Would be fine if we could know how ....
And also anyone installed a custom recovery on it ? CWM or TWRP ? Any help appreciated !
Thanks

[ROM] Alcatel Onetouch Flash (6042D) Stock ROM

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Alcatel Onetouch Flash (6042D) Stock ROM
Installation:
1) Download here 6042D_Stock_Backup.rar (768MB)
2) Extract ROM
3) Download SP Flash Tools
4) Power off your phone
5) Open SPFT and click on "Scatter-loading", now choose the scatter file in the ROM archive
6) Uncheck Preloader.bin
7) Click on Download button
8) Now plug in your device with USB. Download should start. Wait till it finishes flashing (5 to 10 minutes according to your computer speed).
9) Unplug the cable, go to recovery mode (volume down + power till you see alcatel logo); wipe data & factory reset; then wipe cache partition.
10) Now reboot.​
Troubleshooting:
- If your phone is booting and reboot (infinite loop) and so can't be powered off, just click on Download button and plug it in; SPFT will detect it when it turn off. It won't turn on when SPFT initiates the flashing proccess.
- If you're stuck on bootlogo or bootanimation (bootloop). Just click on download button in SPFT, then plug in your phone. Now press the power button for 10s (or less) till SPFT detects it. Now release the button, flashing should start.
Notes:
- NEVER flash with "Preloader.bin" checked ! Unless your device is already HARD BRICKED! (Tip: If you still can boot to recovery, then your device isn't hard bricked. It's just soft bricked)
- You need MTK VCOM USB Drivers installed first! You can find plenty of tutorial on Google to do that
Thank you
in my 6042D.. i go to TWRP--->Wipe---> Formet data.. now in my phone only boot logo displays...
Now can i do....???
thank you very much dude.. god bless you
flashes successfully but phone wont turn on
My phone(6042d) gets flashed successfully each time and also passes memory test but the phone wont turn on. it is detectable by sp flash tools so i guess its not hard bricked but wat might be the issue?plz help me...
Prashanthz said:
My phone(6042d) gets flashed successfully each time and also passes memory test but the phone wont turn on. it is detectable by sp flash tools so i guess its not hard bricked but wat might be the issue?plz help me...
Click to expand...
Click to collapse
Can you see Alcatel Logo ?
Nonta72 said:
Can you see Alcatel Logo ?
Click to expand...
Click to collapse
no.. just plain blank.. no vibration nothing..
Prashanthz said:
no.. just plain blank.. no vibration nothing..
Click to expand...
Click to collapse
Flash the rom without preloader
Does this rom is stock or backup of any device.
Sir, i want to know one thing that this rom is stock (direct from manufacturer) or you backup it from any device. Please answer this ASAP.
GreatSingh said:
Sir, i want to know one thing that this rom is stock (direct from manufacturer) or you backup it from any device. Please answer this ASAP.
Click to expand...
Click to collapse
Good question...
It's Backup of my device.
Manufacturer didn't provide a stock rom because Alcatel guys are LAZY :laugh:
works but no imei
after many attempts it started but i dont have the imei yet, what should i do now?
Prashanthz said:
after many attempts it started but i dont have the imei yet, what should i do now?
Click to expand...
Click to collapse
Reflash stock rom again. It's the only way to restore your IMEI. Or use MTK Droid Tools to restore your IMEI if you previously made a backup.
solved.. thank you..
Nonta72 said:
Reflash stock rom again. It's the only way to restore your IMEI. Or use MTK Droid Tools to restore your IMEI if you previously made a backup.
Click to expand...
Click to collapse
Since i know my imei's i tried to apply it using Chamelephon app from playstore and it fixed the imei problem.
Thank you bro for the stock rom with root.i dint had to root.. :good::good:
Prashanthz said:
Since i know my imei's i tried to apply it using Chamelephon app from playstore and it fixed the imei problem.
Thank you bro for the stock rom with root.i dint had to root.. :good::good:
Click to expand...
Click to collapse
You don't need to write "Thanks".
Just click on the "Thanks" button under posts.
I could have a video of how to thank you
if anyone have problem in downloading from mega can use this mirror i created
https://drive.google.com/open?id=0B1mvphK9i_ZkYmVpWEdsa2M4V1k
* proper credits given in rar title *
-TechExhibeo
I can't find general discussion, development or apps and original development for alcatel one touch flash plus.
does anyone know the link?
TechExhibeo said:
if anyone have problem in downloading from mega can use this mirror i created
https://drive.google.com/open?id=0B1mvphK9i_ZkYmVpWEdsa2M4V1k
* proper credits given in rar title *
-TechExhibeo
Click to expand...
Click to collapse
Thank you buddy.
meliacentrum said:
I can't find general discussion, development or apps and original development for alcatel one touch flash plus.
does anyone know the link?
Click to expand...
Click to collapse
There isn't one.
Error
I'm getting an error that says: "initializing scatter file failed. Please check the name of scatter file which you load is legal." Please help.
Hi ,I am stuck off in flashing my alcatel 6042d ,actually i have done all the steps you mentioned above but by doing these steps when i switched On my phone it doesn't have any access to network also my bluetooth is not working and i also checked my IMEI and it is showing that IMEI not found.
Help me PLz

Guide : How to fix Software issues or Red light of death of Xperia C2305 / CS39H

So first off all what is red light of death It a hard brick state of Xperia C2305/CS39H and it is mostly caused when you are installing a cwm recovery and that won’t match the S1 boot version of your device. Also it is caused by software update not properly installed some errors or incorrect rom flashing not suitable for your device. So before starting to the repairing process read the notes.
Notes :
1. This is official way to recover the device so the warranty will not be voild.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2.. You can use this process for any Xperia device having software issues ,hard brick , soft brick or bootloops any errors can be fixed by this.
3. In this process your stock android will be reinstall and all your data will be wiped so before starting. Take a backup from dr fone brick data repair download link is attached below you can download it and I will soon make a tutorial how to use it.
4. It is a stock rom so if you have unlocked bootloader it will not work you have to use unofficial flash tool to flash the rom.
5. If you face any issues during installation replay me below. Also read everything before starting.
6. You can proceed to the fix
So here how to fix it !!
Required :
1. Bricked Xperia C2305 or CS39H (softbrick , hardbrick ,any software issue, bootloops)
2. Windows PC or Mac but this procedure is only for Windows PC
3. Good Usb cable or Original cable best
4. Charger 800 mah or more. best way use original charger
5. Xperia Companion installed ( download link below windows only)
6. Xperia C2305/ CS39H USB drivers installed( download link below)
7. Proper high speed internet ( 800 kbps or more best 2 mbhs)
8. Time aprox 4hrs or more up to your internet speed
NOTE : BEFORE STARTING THIS OPEN THE BACK COVER OF THE DEVICE AND TAKE SOMETHING POINTED AND PRESS THE RESET
BUTTON WHEN YOU ARE CONNECTED TO THE PC WITH GREEN LED SHOWING THIS WILL WIPE THE THIRD PARTY CWM OR ANY RECOVERY ON YOUR DEVICE. IF YOU DONT THE UNSUPPORTED RECOVERY WILL BLOCK THE INSTALLION PROCESS. ONCE DONE FOLLOW THE STEPS.
So here the steps :
STEP ONE : See wheater your device is charged 80 % or not it is necessary because when you are in download mode alot of battery is consumed . Battery will not charge directly because device is non stop getting in download mode while charging consuming all the battery what is charged so how to charge battery First see the above notification led is off or on it is beside the front facing camera if its is on then the device is on off it by holding power button for 15sec once led is off insert usb and charge it again the above red led will on again off it by holding power button for 15sec Note disconnect the charging usb from device before pressing power button. Repeat this for 1 or 2 hr. Once done go to next step.
STEP TWO : First install Xperia C2305 / CS39H USB driver and then download Xperia Companion on your PC and open it then hit software repair chose smartphone and the hit click here. Once done it will download the drivers. Once done go to step three.
STEP THREE : hold power button for 15 sec then leave power button and hold vol- and insert the usb abd connect to pc don’t leave it until Xperia Companion detect it and leave the vol- and press next i agree all then it will download the OS of your device. NOTE : KEEP IN MIND OS SIZE IS APROXIMATELY 700 MB SO DATA CHARGES MAY APPLY I AM NOT RESPONBLE IF YOU HAVE TO PAY MORE FOR DATA PROCEED AT YOUR OWN RISK . Once done go to step four.
STEP FOUR: Disconnect the Usb and the start the device. First time will take 15 min or more to boot then select language and all the step up you are done.
CREDITS :
Me ( for explaining how to do this)
Sony Mobile Communication ( for making Xperia Companion)
Wonder share ( for making dr fone )
HIT THANKS IF THAT WORKS AND COMMENT BELOW IF YOU HAVE ANY PROBLEM IN ANY PROCESS. I WILL HELP YOU ASASP.
Download links :
Xperia Companion :
http://www-support-downloads.sonymob...aCompanion.exe
Xperia C2305 / CS39H USB Drivers :
https://developer.sonymobile.com/downloads/drivers/xperia-c-driver/
Dr fone offical download page :
https://www.google.co.in/url?sa=t&so...ZVGc8N9D8wOZ-Q
THANK YOU FOR READING
What is the reason for sudden death ?
I never roooted or installed roms to my phone and it suddenly died ! No boot or recovery ! why ? Is there something wrong with sony's software ?My phone is xperia c2305 ... I took it to service center three times and after a few week from repairing it,it always dies again ? So if install a custom rom ,will the problem be gone ?I also want to know how to install the drivers ... I downloaded it but I don't know what to do with it.
Khalid Zaki said:
I never roooted or installed roms to my phone and it suddenly died ! No boot or recovery ! why ? Is there something wrong with sony's software ?My phone is xperia c2305 ... I took it to service center three times and after a few week from repairing it,it always dies again ? So if install a custom rom ,will the problem be gone ?I also want to know how to install the drivers ... I downloaded it but I don't know what to do with it.
Click to expand...
Click to collapse
This is because your mother board has some issues if you have ever hard ware damage this is not new thing. Installing custom rom is not different then using stock the custom rom for xperia c are just stock themed so better dont install but sometimes it might able to slove the issue try installing custom rom. And the thing how to install drivers on yout windows pc charge the battery as shown in my guide then connect the usb to pc the go to control panel you will see the device as unidentified device click on it then search for driver on internet it will surely fail to find the hit browse then select the un zip driver file and select the driver it will install it you are done hit thanks if it works best wishes.
Khalid Zaki said:
I never roooted or installed roms to my phone and it suddenly died ! No boot or recovery ! why ? Is there something wrong with sony's software ?My phone is xperia c2305 ... I took it to service center three times and after a few week from repairing it,it always dies again ? So if install a custom rom ,will the problem be gone ?I also want to know how to install the drivers ... I downloaded it but I don't know what to do with it.
Click to expand...
Click to collapse
There might be some problem with your Phone's hardware. If it's still under warranty, maybe the company can replace your device but at least they can try to repair it for free.
I did what the topic said but xperia companion gives me an error .. please heeeelp !!
Maxx_Yamano said:
For using Xperia companion without error you need a fast internet connection or else it will show UE installation failed it needs faster internet so its not fault of guide as I my self repair my Xperia C from Hard Brick.
Click to expand...
Click to collapse
I have a download rate reaches to 250 KB/s
Maxx_Yamano said:
Lol its too slow mine is 6 mb per sec speed
---------- Post added at 09:15 AM ---------- Previous post was at 09:13 AM ----------
Lol its too slow mine is 6 mb per sec speed which windows you are using also how much bits ? Tell me I will help you in troubleshooting also can u add the screen shot showing error
Click to expand...
Click to collapse
I am using windows 10 (32 bit)
Screenshot for the error ..
Maxx_Yamano said:
Lol its too slow mine is 6 mb per sec speed
---------- Post added at 09:15 AM ---------- Previous post was at 09:13 AM ----------
Lol its too slow mine is 6 mb per sec speed which windows you are using also how much bits ? Tell me I will help you in troubleshooting also can u add the screen shot showing error
Click to expand...
Click to collapse
Maxx_Yamano said:
Xperia Companion can't connect to server please uninstall it and download from my thread https://forum.xda-developers.com/so...fix-software-issues-red-t3578944/post72438460
Click to expand...
Click to collapse
okey , i will try
Maxx_Yamano said:
Xperia Companion can't connect to server please uninstall it and download from my thread https://forum.xda-developers.com/so...fix-software-issues-red-t3578944/post72438460
Click to expand...
Click to collapse
I tried twice but the download reaches to 1/3 of the bar then gives me the same error .
Maxx_Yamano said:
Xperia Companion can't connect to server please uninstall it and download from my thread https://forum.xda-developers.com/so...fix-software-issues-red-t3578944/post72438460
Click to expand...
Click to collapse
I tried twice but it reaches to the 1/3 of the bar then gives me the same error ..
Maxx_Yamano said:
Hey mody3bdo sorry for not answering you I was busy in making my ROM for XPERIA C now I am free I can help you out but for that I need to ask you some questions answer me ASAP so I could assist you
Q.
- Which PC you have ?
- Is your device C2305 ?
- Have you installed ADB drivers of your device ?
- Where it goes 1/3 does it started to download the OS means does it showed you to connect your device or you haven't yet installed just installzing ?? (This is very imp )
- Does your device Hard brick or Soft brick
---- ALSO YOU CAN CHECK UPDATED VERSION OF THIS GUIDE
OVER HERE https://forum.xda-developers.com/sony-xperia-c/help/how-to-fix-dead-xperia-device-reinstall-t3612413 ----
HIT THANKS TO SUPPORT ME & MY WORK ALSO DONT FORGOT TO COMMENT BELOW
Click to expand...
Click to collapse
-My pc ia an hp laptop and i tried to use xperia companion on my desktop pc but the same problem
-yup my device is c2305
-I couldn't install adb drivers as nothing appear in the device manager
- yup it starts to download the os after (initializing) and connecting my device
- i think its a soft break as it just gave me an error while booting (Encryption unsuccessful) So I booted into recovery and selected (WIPE DATA/FACTORY RESET) , So I got into a bootloop , it just stuck on SONY logo .. So I am trying to repaire it to face that error (UEupdatefailed UE2005)
Thanks for helping
Sent from my SM-G530H using XDA Labs
Maxx_Yamano said:
Hey bro don't worry there is a will there is a way remove the back cover of your xperia take some pin or pointed object then hit the rest button wait for some time if your device gets on you are ready if you have got your device stuck due to wipe data factory reset then its not a brick you are stuck on boot logo so might Wmshua works if you have ever flash it using it or else it useless try pressing reset switch back might help you
DON'T FORGOT TO HIT THANKS IF YOU LIKE ME POST THAT WILL HELP ME
Click to expand...
Click to collapse
I tried with a pen but i face a problem with wmshua (flash failed undefinied )
Sent from my SM-G530H using XDA Labs
Maxx_Yamano said:
Might be a hardware damage I would recommend to go to service shop they will flash it will take 250-500 ₹
Click to expand...
Click to collapse
Okey thanks man but is there any other method to try ? As the shops in here dont work on xperia c ?
Sent from my SM-G530H using XDA Labs
Sony c encryption unsuccessful
I use this guide and problem not solved
Any solve please?
Maxx_Yamano said:
Hello guys this guide is out dated ... If you wish to try it then just go to my guide over here : https://forum.xda-developers.com/so...fix-software-issues-red-t3578944/post72438460
HIT THANKS TO SUPPORT ME & MY WORK ALSO DONT FORGOT TO COMMENT BELOW
---------- Post added at 01:30 PM ---------- Previous post was at 01:23 PM ----------
Hey mody3bdo sorry for not answering you I was busy in making my ROM for XPERIA C now I am free I can help you out but for that I need to ask you some questions answer me ASAP so I could assist you
Q.
- Which PC you have ?
- Is your device C2305 ?
- Have you installed ADB drivers of your device ?
- Where it goes 1/3 does it started to download the OS means does it showed you to connect your device or you haven't yet installed just installzing ?? (This is very imp )
- Does your device Hard brick or Soft brick
---- ALSO YOU CAN CHECK UPDATED VERSION OF THIS GUIDE
OVER HERE https://forum.xda-developers.com/sony-xperia-c/help/how-to-fix-dead-xperia-device-reinstall-t3612413 ----
HIT THANKS TO SUPPORT ME & MY WORK ALSO DONT FORGOT TO COMMENT BELOW
Click to expand...
Click to collapse
hi, im in this same situation but after reading the replies i discovered I'm installing drivers not the proper way, thanks in somewhere in page 2. will try my luck again later today, I'm using win 7 32bit if that matters. also is there any other way to charge my device internal battery? I'm suspecting it's battery is almost depleted. coz everytime i connect my phone to usb, it shows unknown device with a steady red light indicates it recognize the device in my pc. but disappears around 10secs maybe as soon the led light starts blinking. if i charge the device in doesnt show any charging animation or led it just turn on by itself on sony logo then reboot on endless loop when charging on a wall charger
xperia companion give error
UEGetPhoneInfoMissungInfo this error msg is given by xperia companion
is there a guide for Xperia C3 Dual D2502?

How to enter EDL mode when G8 Plus died?

Hi,
Does anyone know how to enter EDL mode as the G8 Plus does not show signs of life? I tried to upload Android 10 but got a bootloop. When I got back to Pie the phone didn't get up anymore. When connected to a computer, it does not detect it in any way. It does not respond to the charger. I found in the service manual that you can enter EDL through the combination of the Volume up + Power buttons. I did not have the opportunity to try this method myself because I returned the phone to the service and tomorrow I will have an answer if something can be done. Is there a chance that such a corpse can be saved?
gorbatschoff said:
Hi,
Does anyone know how to enter EDL mode as the G8 Plus does not show signs of life? I tried to upload Android 10 but got a bootloop. When I got back to Pie the phone didn't get up anymore. When connected to a computer, it does not detect it in any way. It does not respond to the charger. I found in the service manual that you can enter EDL through the combination of the Volume up + Power buttons. I did not have the opportunity to try this method myself because I returned the phone to the service and tomorrow I will have an answer if something can be done. Is there a chance that such a corpse can be saved?
Click to expand...
Click to collapse
I tried it , it didnt work on mine . tell me when you have your phone back if it works
gorbatschoff said:
Hi,
Does anyone know how to enter EDL mode as the G8 Plus does not show signs of life? I tried to upload Android 10 but got a bootloop. When I got back to Pie the phone didn't get up anymore. When connected to a computer, it does not detect it in any way. It does not respond to the charger. I found in the service manual that you can enter EDL through the combination of the Volume up + Power buttons. I did not have the opportunity to try this method myself because I returned the phone to the service and tomorrow I will have an answer if something can be done. Is there a chance that such a corpse can be saved?
Click to expand...
Click to collapse
hey friend .Did you fix your device ?
gorbatschoff said:
Hi,
Does anyone know how to enter EDL mode as the G8 Plus does not show signs of life? I tried to upload Android 10 but got a bootloop. When I got back to Pie the phone didn't get up anymore. When connected to a computer, it does not detect it in any way. It does not respond to the charger. I found in the service manual that you can enter EDL through the combination of the Volume up + Power buttons. I did not have the opportunity to try this method myself because I returned the phone to the service and tomorrow I will have an answer if something can be done. Is there a chance that such a corpse can be saved?
Click to expand...
Click to collapse
yo tengo el mismo problema, esta muerto
Urielbp said:
hey friend .Did you fix your device ?
Click to expand...
Click to collapse
el rayo 07 said:
yo tengo el mismo problema, esta muerto
Click to expand...
Click to collapse
most probably you have hard bricked it.
Hi,
My phone came back from the service and the only thing they could offer was to replace the motherboard. But I did not agree because the cost is almost like a new phone. What is destroyed in such a fault? Could she be so damaged by flashing the wrong rom? I am still thinking about whether it can be saved. Entering EDL 9008 mode with buttons does not work. But maybe the short circuit of the points on the motherboard will work ??? I guess which points these are.
gorbatschoff said:
Hi,
My phone came back from the service and the only thing they could offer was to replace the motherboard. But I did not agree because the cost is almost like a new phone. What is destroyed in such a fault? Could she be so damaged by flashing the wrong rom? I am still thinking about whether it can be saved. Entering EDL 9008 mode with buttons does not work. But maybe the short circuit of the points on the motherboard will work ??? I guess which points these are.
Click to expand...
Click to collapse
I'm almost home now. I was able to wake up this cattle by shorting the pins on the board. If the blankflash goes, I drink vodka until morning.
TutorialView attachment 5116195
Wysłane z mojego moto g(8) plus przy użyciu Tapatalka
Hi, Did you fix your phone? if so, can I know what app you used? I can't use blank flash.
Of course I fixed it. Works like new on the latest system. You have instructions on what to do.View attachment 5117011
Wysłane z mojego moto g(8) plus przy użyciu Tapatalka
mercy
i fix my phone . thank you ????
(so easy ) thanks. my phone died for 2 month
gorbatschoff said:
Of course I fixed it. Works like new on the latest system. You have instructions on what to do.View attachment 5117011
Wysłane z mojego moto g(8) plus przy użyciu Tapatalka
Click to expand...
Click to collapse
Broken attachment...
Help me, please !
w4rh4ck3r said:
Broken attachment...
Help me, please !
Click to expand...
Click to collapse
repair manual in the attachment
w4rh4ck3r said:
Broken attachment...
Help me, please !
Click to expand...
Click to collapse
help i tried the tutorial fix using tweezers to short circuit the 2 pins then with my phone connected to pc i keep getting usb device not recognized and malfunctioned help iknow im so close to fixing my bricked g8 plus

(solved) Redmi 9AT hard bricked

Any solutions?
i've a redmi 9 at as second smartphone, i was so bored about it bad percormances, and i try to flash orange fox recovery and flash for my first time, arrowOS and try to use it better.
but the recovery (also TWRP) stucked at logo, so i try a downgrade from 12.5.0 (last release with Android 11) to 12.0.4 (A10) and give me a c hance to see working the recovery and try to flash my arrow zip.
unluckily this was not possibile, cause i brick my redmi and all my attempt to solve were useless
any suggests?
this attempt with MTK GSM gone ok
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
but sp flash tool give me a lot of error:
this for example ( i already tried a lot of stock rom, without fortune)
my original- stock romwas android 10 based V. 12.0.4.0 QCDEUTI
Solutions? thank you for your attention. Merry Xmas from italy
I had the exact
agesandros said:
Any solutions?
i've a redmi 9 at as second smartphone, i was so bored about it bad percormances, and i try to flash orange fox recovery and flash for my first time, arrowOS and try to use it better.
but the recovery (also TWRP) stucked at logo, so i try a downgrade from 12.5.0 (last release with Android 11) to 12.0.4 (A10) and give me a c hance to see working the recovery and try to flash my arrow zip.
unluckily this was not possibile, cause i brick my redmi and all my attempt to solve were useless
any suggests?
this attempt with MTK GSM gone ok
View attachment 5791059
but sp flash tool give me a lot of error:
this for example ( i already tried a lot of stock rom, without fortune)
my original- stock romwas android 10 based V. 12.0.4.0 QCDEUTI
View attachment 5791061
Solutions? thank you for your attention. Merry Xmas from it
Click to expand...
Click to collapse
I had the same problem, I just needed to hold the buttons for 1~2 seconds more when using the bypass tool.
If that doesn't work try another download agent
Rares6567 said:
I had the exact
I had the same problem, I just needed to hold the buttons for 1~2 seconds more when using the bypass tool.
If that doesn't work try another download agent
Click to expand...
Click to collapse
Already tried a lot of DA, but without success.
Where can i download others DA?
agesandros said:
Already tried a lot of DA, but without success.
Where can i download others DA?
Click to expand...
Click to collapse
If you tried a lot of DA, it means it isn't the reason i guess. Did you tried holding the buttons for 1~2 more seconds when using the bypass tool?
ies, done...
agesandros said:
ies, done...
Click to expand...
Click to collapse
It worked? Try reinstalling drivers and libusb... Sorry idk it worked for me.
Rares6567 said:
It worked? Try reinstalling drivers and libusb... Sorry idk it worked for me.
Click to expand...
Click to collapse
No. I tried all i know... A lot of DA
ROM and auth file.
Nothing works
agesandros said:
No. I tried all i know... A lot of DA
ROM and auth file.
Nothing works
Click to expand...
Click to collapse
Try another sp flash tool version... Idk... Btw I say it 3rd time cuz why not, hold for 1~2 seconds more when bypassing ( or 3 if it will work) just try and be sure you hold the right buttons
Rares6567 said:
Try another sp flash tool version... Idk... Btw I say it 3rd time cuz why not, hold for 1~2 seconds more when bypassing ( or 3 if it will work) just try and be sure you hold the right buttons
Click to expand...
Click to collapse
Done, already used 2 or 3 version of SPFT. I think combo buttons Is ok .
I will try in future with a lot of calm, now i want only hit the wall with this stupid redmi, i m so unsatisfied by MIUI and this octacore phone. A lot of lag everywhere. Similar entry level smartphones, are better performed.
agesandros said:
Done, already used 2 or 3 version of SPFT. I think combo buttons Is ok .
I will try in future with a lot of calm, now i want only hit the wall with this stupid redmi, i m so unsatisfied by MIUI and this octacore phone. A lot of lag everywhere. Similar entry level smartphones, are better performed.
Click to expand...
Click to collapse
So are you sure are you using the right rom? Like this forum is for redmi 9a and you say you have an redmi 9at. Yea they have same specs but who knows...
Here is a link for android 11 fastboot rom redmi 9a/9at EEA : https://xiaomifirmwareupdater.com/miui/dandelion/stable/V12.5.7.0.RCDEUXM/
P.S. : Next time don't flash v12.0.4 cz this is why my phone didn't even showed the screen after first flashing with it....
P.S.2 : I see you are using a different bypassing tool from what I used, try using another one, and try to hold the buttons almost in the same time when you plug the cable in the phone.
And at Sp Flash Tool try to use firmware update option, maybe it will work, because it is a firmware update, isn't it?
Make sure you selected the right port in the Sp Flash Tool settings.
Rares6567 said:
So are you sure are you using the right rom? Like this forum is for redmi 9a and you say you have an redmi 9at. Yea they have same specs but who knows...
Here is a link for android 11 fastboot rom redmi 9a/9at EEA : https://xiaomifirmwareupdater.com/miui/dandelion/stable/V12.5.7.0.RCDEUXM/
P.S. : Next time don't flash v12.0.4 cz this is why my phone didn't even showed the screen after first flashing with it....
P.S.2 : I see you are using a different bypassing tool from what I used, try using another one, and try to hold the buttons almost in the same time when you plug the cable in the phone.
Click to expand...
Click to collapse
Sincerely, I already done a lot of your suggestions.
Used 3 or 4 different versions of sp flash tool.
Used a lot of DA, auth and different official rom
Changed a lot of time usb port, settings usb or UART inside sp flash tool. Changed combos about press buttons l, tried update firmware option instead download one,but all these attemps completely useless to solve my flashing rom issues.
My redmi is dead. No response when I push power button, neither when I try to enter in fastboot or recovery... No vibrations, no display light, I will try to reinstall all my drivers and try to do my better again.
Fortunately I've a redmi note as first smartphone, this 9AT is only for fun...
agesandros said:
Sincerely, I already done a lot of your suggestions.
Used 3 or 4 different versions of sp flash tool.
Used a lot of DA, auth and different official rom
Changed a lot of time usb port, settings usb or UART inside sp flash tool. Changed combos about press buttons l, tried update firmware option instead download one,but all these attemps completely useless to solve my flashing rom issues.
My redmi is dead. No response when I push power button, neither when I try to enter in fastboot or recovery... No vibrations, no display light, I will try to reinstall all my drivers and try to do my better again.
Fortunately I've a redmi note as first smartphone, this 9AT is only for fun...
Click to expand...
Click to collapse
Your phone isn't dead, just have patience... I had the same problem one month.
Rares6567 said:
Your phone isn't dead, just have patience... I had the same problem one month.
Click to expand...
Click to collapse
I now is only time and patience issue. But now, I'm bored by all these useless attempts without fortune. I will download the ROM linked and try again and again. Fortunately the redmi battery is almost full.
agesandros said:
I now is only time and patience issue. But now, I'm bored by all these useless attempts without fortune. I will download the ROM linked and try again and again. Fortunately the redmi battery is almost full.
Click to expand...
Click to collapse
Uhm ok if the rom didn't worked try this: https://xiaomifirmwareupdater.com/miui/dandelion/stable/V12.0.20.0.QCDEUXM/
This is the rom I use.
Rares6567 said:
Uhm ok if the rom didn't worked try this: https://xiaomifirmwareupdater.com/miui/dandelion/stable/V12.0.20.0.QCDEUXM/
This is the rom I use.
Click to expand...
Click to collapse
i used this rom and a SP from kurdish mod
i m flashing, crossed fingers
( In my case, works only uncheking bypass auth under mod versione of SP flashing tool.)
Ps: USB port must be checked as mediatek usb port
waiting until the end... to see a result.
Update:
incredible works!
Another Question: a solution for display white spot ?
agesandros said:
i used this rom and a SP from kurdish mod
i m flashing, crossed fingers
( In my case, works only uncheking bypass auth under mod versione of SP flashing tool.)
Ps: USB port must be checked as mediatek usb port
View attachment 5791715
waiting until the end... to see a result.
Update:
incredible works!
View attachment 5791717
Another Question: a solution for display white spot ?
Click to expand...
Click to collapse
Congrats, what do you mean display white spot?
Rares6567 said:
Congrats, what do you mean display white spot?
Click to expand...
Click to collapse
The white pixel in my display. Like white spot on led-TV ...as a defect.
agesandros said:
The white pixel in my display. Like white spot on led-TV ...as a defect.
Click to expand...
Click to collapse
Ummm, you see it only when booting to android or everytime( in fastboot, recovery etc)

Categories

Resources